微重力条件下细胞培养和组织工程研究进展

随着空间生命科学研究的发展,人们将细胞、组织培养技术与微重力环境相结合产生了组织工程研究的一个新领域——微重力组织工程。模拟微重力条件下细胞培养和组织构建研究表明,微重力环境有利于细胞的三维生长,形成具有功能的组织样结构,培养后的三维组织无论从形态上还是基因表达上都更接近于正常的机体组织。这种微重力对细胞的作用效应,将可能为未来组织工程和再生医学研究提供一条新途径。该文概述了近十年来国内外微重力组织工程相关研究的最新进展。     

进化细胞生物学的提出及其任务

作者提出应创建一门源于进化生物学与细胞生物学两者的交叉学科一进化细胞生物学(细胞的进化生物学)。其根本任务在于用进化的观点考察真核细胞的一切方面,从它们的起源和演化来认识它们的现在。文中列举了其具体的研究内容,并分析了其研究方法上的特点,指出在这里需要把进化生物学的综合性分析与细胞生物学的实验研究最紧密地结合起来。文中还论述了真核细胞的细胞器的“不进化”现象,指出其根本原因在于进化焦点的转移。     

电子断层成像技术及其在细胞生物学中的应用

电子断层成像技术（electrontomography）是近年来发展起来一项三维成像技术,可以在纳米分辨率（2-10nm）水平上获得生物大分子及其复合物或聚集体、细胞器、细胞以及组织的三维结构,而且可以用于研究生物大分子在细胞中的定位、排列、分布以及相互作用,已逐渐成为细胞生物学领域中的一项重要技术手段。该文针对这项技术及其在细胞生物学中的应用作一简要介绍。     

Proliferation of human hematopoietic bone marrow cells in simulated microgravity

Expansion and/or maintenance of hematopoietic stem cell (HSC) potential following in vitro culture remains a major obstacle in stem cell biology and bone marrow (BM) transplantation. Several studies suggest that culture of mammalian cells in microgravity (micro-g) may reduce proliferation and differentiation of these cells. We investigated the application of these findings to the field of stem cell biology in the hopes of expanding HSC with minimal loss of hematopoietic function. To this end, BM CD34+ cells were cultured for 4-6 d in rotating wall vessels for simulation of micro-g, and assessed for expansion, cell cycle activation, apoptosis, and hematopoietic potential. While CD34+ cells cultured in normal gravity (1-g) proliferated up to threefold by day 4-6, cells cultured in micro-g did not increase in number. As a possible explanation for this, cells cultured in simulated micro-g were found to exit G0/G1 phase of cell cycle at a slower rate than 1-g controls. When assayed for primitive hematopoietic potential in secondary conventional 1-g long-term cultures, cells from initial micro-g cultures produced greater numbers of cells and progenitors, and for a longer period of time, than cultures initiated with 1-g control cells. Similar low levels of apoptosis and adhesion molecule phenotype in micro-g and 1-g-cultured cells suggested similar growth patterns in the two settings. These data begin to elucidate the effects of micro-g on proliferation of human hematopoietic cells and may be potentially beneficial to the fields of stem cell biology and somatic gene therapy.     

History of plant tissue culture

Plant tissue culture, or the aseptic culture of cells, tissues, organs, and their components under defined physical and chemical conditions in vitro, is an important tool in both basic and applied studies as well as in commercial application. It owes its origin to the ideas of the German scientist, Haberlandt, at the begining of the 20th century. The early studies led to root cultures, embryo cultures, and the first true callus/tissue cultures. The period between the 1940s and the 1960s was marked by the development of new techniques and the improvement of those that were already in use. It was the availability of these techniques that led to the application of tissue culture to five broad areas, namely, cell behavior (including cytology, nutrition, metabolism, morphogenesis, embryogenesis, and pathology), plant modification and improvement, pathogen-free plants and germplasm storage, clonal propagation, and product (mainly secondary metabolite) formation, starting in the mid-1960s. The 1990s saw continued expansion in the application of the in vitro technologies to an increasing number of plant species. Cell cultures have remained an important tool in the study of basic areas of plant biology and biochemistry and have assumed major significance in studies in molecular biology and agricultural biotechnology. The historical development of these in vitro technologies and their applications are the focus of this chapter.     

Baculovirus display strategies: Emerging tools for eukaryotic libraries and gene delivery.

Recombinant baculoviruses have been extensively used as vectors for abundant expression of a large variety of foreign proteins in insect cell cultures. The appeal of the system lies essentially in easy cloning techniques and virus propagation combined with the eukaryotic post-translational modification machinery of the insect cell. Recently, a novel molecular biology tool was established by the development of baculovirus surface display, using different strategies for presentation of foreign peptides and proteins on the surface of budded virions. This eukaryotic display system enables presentation of large complex proteins on the surface of baculovirus particles and has thereby become a versatile system in molecular biology. Surface display strategies play an important role, as they may be used to enhance the efficiency and specificity of viral binding and entry to mammalian cells. In addition, baculovirus surface display vectors have been engineered to contain mammalian promoter elements designed for gene delivery both in vitro and in vivo. Moreover, baculovirus capsid display has recently been developed; this holds promise for intracellular targeting of the viral capsid and subsequent cytosolic delivery of desired protein moieties. Finally, the viruses can accommodate large insertions of foreign DNA and replicate only in insect cells. Together, these are attributes that are very likely to make them important tools in functional genomics and proteomics.     

Regulating apoptosis in mammalian cell cultures

Cell culture technology has become a widely accepted method used to derive therapeutic and diagnostic protein products. Mammalian cells adapted to grow in bioreactors now play an integral role in the development of these biologicals. A major limiting factor determining the output efficiency of mammalian cell cultures however, is apoptosis or programmed cell death. Methods to delay apoptosis and increase the longevity of cell cultures can lead to more economical processes. Researchers have shown that both genetic and chemical strategies to block apoptotic signals can increase cell culture productivity. Here, we discuss various strategies which have been implemented to improve cellular viabilities and productivities in batch cultures.     

Three-dimensional bioprinting in tissue engineering and regenerative medicine

With the advances of stem cell research, development of intelligent biomaterials and three-dimensional biofabrication strategies, highly mimicked tissue or organs can be engineered. Among all the biofabrication approaches, bioprinting based on inkjet printing technology has the promises to deliver and create biomimicked tissue with high throughput, digital control, and the capacity of single cell manipulation. Therefore, this enabling technology has great potential in regenerative medicine and translational applications. The most current advances in organ and tissue bioprinting based on the thermal inkjet printing technology are described in this review, including vasculature, muscle, cartilage, and bone. In addition, the benign side effect of bioprinting to the printed mammalian cells can be utilized for gene or drug delivery, which can be achieved conveniently during precise cell placement for tissue construction. With layer-by-layer assembly, three-dimensional tissues with complex structures can be printed using converted medical images. Therefore, bioprinting based on thermal inkjet is so far the most optimal solution to engineer vascular system to the thick and complex tissues. Collectively, bioprinting has great potential and broad applications in tissue engineering and regenerative medicine. The future advances of bioprinting include the integration of different printing mechanisms to engineer biphasic or triphasic tissues with optimized scaffolds and further understanding of stem cell biology.     

Molecular parasitology goes cellular

Application of molecular genetics is an increasingly feasible undertaking in parasitology; however, an understanding of the phenotypes of various mutants generated by this approach will ultimately rely on cellular approaches to resolve the function of various proteins. In addition to the advances in understanding the biology of parasitism, such studies probably will uncover fundamental aspects of how eukaryotic cells communicate and regulate their responses to the environment. Thus, parasites may one day provide useful biological tools, just as viruses and bacterial toxins have done in the past, towards probing the biology of mammalian cells.     

Effect of amino acid supplementation on titer and glycosylation distribution in hybridoma cell cultures—Systems biology‐based interpretation using genome‐scale metabolic flux balance model and multivariate data analysis

Genome‐scale flux balance analysis (FBA) is a powerful systems biology tool to characterize intracellular reaction fluxes during cell cultures. FBA estimates intracellular reaction rates by optimizing an objective function, subject to the constraints of a metabolic model and media uptake/excretion rates. A dynamic extension to FBA, dynamic flux balance analysis (DFBA), can calculate intracellular reaction fluxes as they change during cell cultures. In a previous study by Read et al. (2013), a series of informed amino acid supplementation experiments were performed on twelve parallel murine hybridoma cell cultures, and this data was leveraged for further analysis (Read et al., Biotechnol Prog. 2013;29:745–753). In order to understand the effects of media changes on the model murine hybridoma cell line, a systems biology approach is applied in the current study. Dynamic flux balance analysis was performed using a genome‐scale mouse metabolic model, and multivariate data analysis was used for interpretation. The calculated reaction fluxes were examined using partial least squares and partial least squares discriminant analysis. The results indicate media supplementation increases product yield because it raises nutrient levels extending the growth phase, and the increased cell density allows for greater culture performance. At the same time, the directed supplementation does not change the overall metabolism of the cells. This supports the conclusion that product quality, as measured by glycoform assays, remains unchanged because the metabolism remains in a similar state. Additionally, the DFBA shows that metabolic state varies more at the beginning of the culture but less by the middle of the growth phase, possibly due to stress on the cells during inoculation. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1163–1173, 2016     

Cell3: a new vision for study of the endomembrane system in mammalian cells

The endomembrane system of mammalian cells provides massive capacity for the segregation of biochemical reactions into discrete locations. The individual organelles of the endomembrane system also require the ability to precisely transport material between these compartments in order to maintain cell homeostasis; this process is termed membrane traffic. For several decades, researchers have been systematically identifying and dissecting the molecular machinery that governs membrane trafficking pathways, with the overwhelming majority of these studies being carried out in cultured cells growing as monolayers. In recent years, a number of methodological innovations have provided the opportunity for cultured cells to be grown as 3-dimensional (3D) assemblies, for example as spheroids and organoids. These structures have the potential to better replicate the cellular environment found in tissues and present an exciting new opportunity for the study of cell function. In this mini-review, we summarize the main methods used to generate 3D cell models and highlight emerging studies that have started to use these models to study basic cellular processes. We also describe a number of pieces of work that potentially provide the basis for adaptation for deeper study of how membrane traffic is coordinated in multicellular assemblies. Finally, we comment on some of the technological challenges that still need to be overcome if 3D cell biology is to become a mainstream tool toward deepening our understanding of the endomembrane system in mammalian cells.     

着丝粒核小体结构研究进展

着丝粒是构成真核生物染色体的必需元件。在细胞有丝分裂或减数分裂时,微管通过动粒与染色体着丝粒连接,参与细胞分裂的染色体分离与分配过程,使染色体平均分配到子细胞中。构成着丝粒的基本单位是着丝粒特异的核小体,与常规核小体不同的是着丝粒核小体中的组蛋白H3被其变种——着丝粒组蛋白H3所替换。最近几年,着丝粒核小体的结构成为细胞生物学研究的热点之一。该文综述了最近在多种真核生物研究中,通过体外和体内实验,提出的着丝粒核小体结构的八聚体、六聚体、同型四聚体以及半八聚体模型,并对着丝粒核小体结构的动态模型与功能的关系进行了探讨。     

Nutrient optimization for high density biological production applications

Conclusion At the 1989 annual meeting of the U.S. Tissue Culture Associations, Ricahrd am, a leading investigator in the serum-free nutrient requirements of cultured cells, commented on the process of medium development. He noted that a survey of major media manufacturers revealed that, among the top selling mammalian cell culture media formulations, most were nearly thirty years old.This commentary is noteworthy considering the tremendous changes in cell culture understanding and derived applications which have emerged over these three decades. Fastidious cell types relatively unknown to investigators of the 1950s and 1960s are now being cultivated in defined, serum-free environments. Culture environments range from limiting dilution clonal recoveries to maintenance cultures approaching tissue densities. While research applications continue to predominate, applications of cell culture have expanded to the engineered production of biopharmaceuticals, to replacement of animal models for toxicology testing, and to the preservation, activation and expansion of human cells, tissues and organs.It is likely that future nutrient medium development will be predicated upon the design of a minimal number of defined formulations of relatively generic utility to a broad class of cell types. Analytical techniques derived from those described herein will be exploited in the user laboratory and in collaboration with the supplier to optimize the nutrient composition for the desired biological response.     

Protein and Genome Evolution in Mammalian Cells for Biotechnology Applications

Mutation and selection are the essential steps of evolution. Researchers have long used in vitro mutagenesis, expression, and selection techniques in laboratory bacteria and yeast cultures to evolve proteins with new properties, termed directed evolution. Unfortunately, the nature of mammalian cells makes applying these mutagenesis and whole-organism evolution techniques to mammalian protein expression systems laborious and time consuming. Mammalian evolution systems would be useful to test unique mammalian cell proteins and protein characteristics, such as complex glycosylation. Protein evolution in mammalian cells would allow for generation of novel diagnostic tools and designer polypeptides that can only be tested in a mammalian expression system. Recent advances have shown that mammalian cells of the immune system can be utilized to evolve transgenes during their natural mutagenesis processes, thus creating proteins with unique properties, such as fluorescence. On a more global level, researchers have shown that mutation systems that affect the entire genome of a mammalian cell can give rise to cells with unique phenotypes suitable for commercial processes. This review examines the advances in mammalian cell and protein evolution and the application of this work toward advances in commercial mammalian cell biotechnology.     

Listeria monocytogenes,a model in infection biology

Listeria monocytogenes causes listeriosis, a systemic infection which manifests as bacteremia, often complicated by meningoencephalitis in immunocompromised individuals and the elderly, and fetal‐placental infection in pregnant women. It has emerged over the past decades as a major foodborne pathogen, responsible for numerous outbreaks in Western countries, and more recently in Africa. L. monocytogenes' pathogenic properties have been studied in detail, thanks to concomitant advances in biological sciences, in particular molecular biology, cell biology and immunology. L. monocytogenes has also been instrumental to basic advances in life sciences. L. monocytogenes therefore stands both a tool to understand biology and a model in infection biology. This review briefly summarises the clinical and some of the pathophysiological features of listeriosis. In the context of this special issue, it highlights some of the major discoveries made by Pascale Cossart in the fields of molecular and cellular microbiology since the mid‐eighties regarding the identification and characterisation of multiple bacterial and host factors critical to L. monocytogenes pathogenicity. It also briefly summarises some of the key findings from our laboratory on this topic over the past years.     

Novel cell culture device enabling three-dimensional cell growth and improved cell function

A better understanding of cell biology and cell-cell interactions requires three-dimensional (3-D) culture systems that more closely represent the natural structure and function of tissues in vivo. Here, we present a novel device that provides an environment for routine 3-D cell growth in vitro. We have developed a thin membrane of polystyrene scaffold with a well defined and uniform porous architecture and have adapted this material for cell culture applications. We have exemplified the application of this technology by growing HepG2 liver cells on 2- and 3-D substrates. The performance of HepG2 cells grown on scaffolds was significantly enhanced compared to functional activity of cells grown on 2-D plastic. The incorporation of thin membranes of porous polystyrene to create a novel device has been successfully demonstrated as a new 3-D cell growth technology for routine use in cell culture.     

Peptide aptamers: tools for biology and drug discovery.

Peptide aptamer technology is relatively youthful. It has the advantage over existing techniques that the reagents identified are designed for expression in eukaryotic cells. This allows the construction of molecular tools that allow the logic of genetics, from knockouts to extragenic suppressors, to be applied to studies of proteins in tissue culture cells. Until recently, the available tools have limited our understanding of cell biology. The same limitation restricts out ability to validate the numerous candidate drug targets emerging from genome-wide approaches to cellular biology. Peptide aptamers represent a stride forwards in the evolution of a modular, molecular tool kit for cell biology and for drug target validation. The authors predict that they will also play a role in the transition from genomic to proteomic microarray technology.