菊芋类金属硫蛋白基因htMT2的克隆及其表达特征分析

从菊芋 (HelianthustuberosusL .)块茎cDNA文库中得到了一个新的植物类金属硫蛋白基因htMT2的cDNA序列 ,全长 5 0 9bp ,包括 2 4 0bp的开放阅读框、6 2bp的 5′端非翻译区、2 0 7bp的 3′端非翻译区。通过PCR获得了 2个htMT2编码区的部分基因组片段htMTG_1及htMTG_2 ,长度分别为 986bp和 982bp。分析表明两个基因组片段均包含 3个外显子及 2个内含子 ,编码一个由 79个氨基酸残基组成的多肽 ,与从htMT2推测的多肽完全一致 ,该多肽具有植物类金属硫蛋白的典型结构特征 ,N端及C端结构域富含Cys ,分别具有 8个和 7个Cys残基 ,上述两个结构域被一个无Cys的中间区分开。Southern杂交结果表明 ,htMT2在菊芋基因组中以小基因家族的形式存在。Northern杂交结果表明htMT2在叶片、叶柄、茎及块茎中均有表达 ,在茎中有较高水平的表达 ,但在根中未检测到杂交信号。经Cu2 处理后 ,htMT2在茎中的表达量显著降低。与其他 2型金属硫蛋白的序列同源性比较及htMT2对金属离子处理的反应均表明 ,htMT2是一种新的植物类金属硫蛋白基因。     

菊芋类金属硫蛋白基因htMT2的克隆及其表达特征分析

从菊芋(Helianthus tuberosus L.)块茎cDNA文库中得到了一个新的植物类金属硫蛋白基因htMT2的cDNA序列,全长509 bp,包括240 bp的开放阅读框、62 bp的5′端非翻译区、207 bp的3′端非翻译区.通过PCR获得了2个htMT2编码区的部分基因组片段htMTG-1及htMTG-2,长度分别为986 bp和982 bp.分析表明两个基因组片段均包含3个外显子及2个内含子,编码一个由79个氨基酸残基组成的多肽,与从htMT2推测的多肽完全一致,该多肽具有植物类金属硫蛋白的典型结构特征,N端及C端结构域富含Cys,分别具有8个和7个Cys残基,上述两个结构域被一个无Cys的中间区分开.Southern杂交结果表明,htMT2在菊芋基因组中以小基因家族的形式存在.Northern杂交结果表明htMT2在叶片、叶柄、茎及块茎中均有表达,在茎中有较高水平的表达,但在根中未检测到杂交信号.经Cu2+处理后,htMT2在茎中的表达量显著降低.与其他2型金属硫蛋白的序列同源性比较及htMT2对金属离子处理的反应均表明,htMT2是一种新的植物类金属硫蛋白基因.     

柽柳金属硫蛋白基因的克隆及序列分析

用木麻黄(Casuarina glauca)的金属硫蛋白基因(metallothionein 1)氨基酸序列对柽柳ESTs序列本地数据库进行tBlastn检索,获得了柽柳金属硫蛋白基因全长cDNA序列,去除polyA后该基因全长366 bp,其中5′非翻译区97 bp,3′非翻译区59 bp,开放读码框(ORF)长210 bp,编码70 个氨基酸组成的多肽,蛋白分子量为6.793 kD,理论等电点为4.99,含10个Cys,集中分布在肽链的N端和C端。BlastP同源性分析表明该基因与花生同源性最高,与小豆同源性最低。该基因的EST序列在GenBank登录(登录号：CV792539)。     

眼镜王蛇泛素融合蛋白基因和核糖体蛋白L30基因的克隆及分析

从广西产眼镜王蛇（Ophiophagus hannah）毒腺中抽提总RNA,经mRNA纯化后构建眼镜王蛇毒腺cDNA文库。从所构建的cDNA文库中,随机筛选200个克隆测序,得到两个在进化上高度保守的基因：泛素融合蛋白基因（GenBank登录号为AF297036）和核糖体蛋白L30基因（GenBank登录号是AF297033）。前者cDNA的开放阅读框为387bp,后者为348bp。前者编码128个氨基酸残基组成的泛素融合蛋白前体;后者编码115个氨基酸残基组成的核糖体蛋白L30前体。由cDNA序列推导出的氨基酸序列分析表明,泛素融合蛋白前体包括N-末端的泛素结构域（76个氨基酸残基）和C-末端的核糖体蛋白L40结构域（52个氨基酸残基）。该蛋白为一高碱性蛋白,C末端含有一个“锌指”模式结构。与16个物种比较的结果表明,眼镜王蛇与脊椎动物的泛素融合蛋白氨基酸序列相似度较高,具有高度的保守性。     

紫杆柽柳与其它物种脂质转运蛋白基因编码蛋白的同源性比较

根据从柽柳cDNA文库克隆获得的脂质转运蛋白(LTP)的部分序列,用RACE技术克隆出其全长cDNA序列.基因的5'非翻译区96bp,3'非翻译区222bp,开放阅读框285bp,编码94个氨基酸,预计蛋白的分子量为9.9 kD,等电点为8.02.此基因有8个位置保守的Cys残基及26个氨基酸的信号肽,为典型的植物脂质转运蛋白基因.其基因序列数据库(GenBank)登录号为AY574218(基因)和AAS79106(蛋白).     

家蝇金属硫蛋白基因的克隆、原核表达及活性检测

金属硫蛋白是一类普遍存在于生物体内、富含半胱氨酸的小分子蛋白,能螯合多种金属离子。本研究根据EST序列信息,利用RACE技术克隆到1条家蝇Musca domestica金属硫蛋白基因MdMtn（GenBank登录号为GU289398）。序列分析表明,MdMtn cDNA全长408 bp,包含1个123 bp的开放阅读框,编码40个氨基酸残基,其中半胱氨酸残基10个,呈-C-X-C-方式排列。此蛋白理论分子量为3.8 kD,等电点为878。为了解家蝇金属硫蛋白对重金属的结合活性,构建了pET-DsbA-MT表达载体,并转化Escherichia coli BL21（DE3）宿主菌进行融合表达。研究发现MT重组菌对重金属镉的耐受性得到了明显加强,提示MdMtn基因可能在家蝇适应重金属环境中起到积极作用。     

猪JARID1C基因的cDNA克隆、生物信息学及组织表达谱分析

JARID1C是高度保守的ARID蛋白家族的成员,该家族的蛋白参与并引起一系列生物学效应,如染色质重塑、细胞增殖与分裂、个体发育以及基因转录调控。JARID1C在人脑中表达丰富,对脑的发育和维持正常功能具有重要作用,突变可引起智力迟钝。本研究采用电子克隆（insilicocloning）的方法并结合5′末端快速扩增技术（RACE）,从猪卵巢中克隆到JARID1C的全长cDNA序列（GenBank登录号：EF139241）。猪JARID1C基因的cDNA全长5,908bp,包括4,551bp的开放阅读框（ORF）、522bp的5′非翻译区（5′UTR）和835bp的3′非翻译区（3′UTR）,polyA加尾信号序列AATAAA位于5,881bp和5,886bp之间。生物信息学分析揭示JARID1C蛋白含有1517个氨基酸残基,定位于细胞核中,该蛋白含有5个保守的结构域：JmjN结构域、ARID结构域、JmjC结构域、C5HC2锌指结构域和PHD锌指结构域。应用ClusterW程序分别对猪、狗、小鼠、大鼠、人和猿的JARID1C核苷酸序列和氨基酸序列进行多重序列比对,发现猪的JARID1C与其他哺乳动物具有很高的相似性。借助Mega3.1软件,采用N-J算法构建JARID1亚家族蛋白的系统进化树,揭示不同物种的进化关系。应用实时荧光定量PCR技术分析该基因在不同组织的表达差异,结果表明该基因在各组织均不同程度地表达,其中在肺和骨骼肌表达水平最低,而在脑和性腺表达水平最高。     

疣粒野生稻金属硫蛋白基因的获得及序列分析

对SMARTTM技术构建的疣粒野生稻叶片cDNA文库克隆进行随机测序,获得了疣粒野生稻金属硫蛋白基因的cDNA序列.该序列全长412 bp,开放阅读框长186 bp,编码62个氨基酸,10个半胱氨酸集中分布在肽链的N端和C端,该蛋白的分子量为6.4 kD,理论等电点(pI)为5.14.Blastp同源性分析表明其属于金属硫蛋白基因家族.     

苹果一个锌指蛋白基因的cDNA克隆及其表达特性分析

采集了处于营养生长向生殖行长转化期(6~8月)的红玉苹果(Malus domestica Borkh.)茎顶,构建了其cDNA文库,并从中分离得到了一个具有锌指结构的EST序列,又通过5`RACE的方法,从cDNA文库中找到了其上游779bp的cDNA片段.最后用PCR的方法获得了苹果锌指蛋白的全长cDNA,并命为MdZF1.该cDNA序列已在GenBank登录,登录号为AB116545.MdZF1的锌指结构域与玉米的开花转换基因ID1有高度同源性.通过对苹果不同组织、器官的Northem和RT-PCR分析表明MdZF1在根、茎、叶、顶芽以及花器官(萼片、花瓣、雄蕊、雌蕊)中都有表达.Southern分析表明MdZF1的基因组中是以单拷贝存在的.     

烟草乙烯受体类似物NTHK2全长基因的克隆及其激酶结构域生化特性

应用5′-ARCE方法克隆到烟草NTHK2的全长cDNA。其全长cDNA共有3216bp,其中5′非编码区为509bp,3′非编码区为427bp,编码区为2280bp,编码产物为760个氨基酸。NTHK2氨基酸序列与植物中的许多杂合型的两组分乙烯受体基因有较高的同源性,具有推测的组氨酸激酶结构域和接受域。但是,在激酶结构域中没有保守的组氨酸,而是被一个天冬氨酸残基所替代。为了研究其生化特性,在酵母中以融合蛋白的形式表达了激酶结构域,体外激酶分析表明,当有Mg^2 存在的情况下NTHK2能够自我磷酸化。进一步的研究应阐明NTHK2在植物体内是否能够作为乙烯受体。参与乙烯的信号传导过程。     

Collagen-like triple helix formation of synthetic (Pro-Pro-Gly)10 analogues: (4(S)-hydroxyprolyl-4(R)-hydroxyprolyl-Gly)10, (4(R)-hydroxyprolyl-4(R)-hydroxyprolyl-Gly)10 and (4(S)-fluoroprolyl-4(R)-fluoroprolyl-Gly)10.

For the rational design of a stable collagen triple helix according to the conventional rule that the pyrrolidine puckerings of Pro, 4-hydroxyproline (Hyp) and 4-fluoroproline (fPro) should be down at the X-position and up at the Y-position in the X-Y-Gly repeated sequence for enhancing the triple helix propensities of collagen model peptides, a series of peptides were prepared in which X- and Y-positions were altogether occupied by Hyp(R), Hyp(S), fPro(R) or fPro(S). Contrary to our presumption that inducing the X-Y residues to adopt a down-up conformation would result in an increase in the thermal stability of peptides, the triple helices of (Hyp(S)-Hyp(R)-Gly)(10) and (fPro(S)-fPro(R)-Gly)(10) were less stable than those of (Pro-Hyp(R)-Gly)(10) and (Pro-fPro(R)-Gly)(10), respectively. As reported by B?chinger's and Zagari's groups, (Hyp(R)-Hyp(R)-Gly)(10) which could have an up-up conformation unfavorable for the triple helix, formed a triple helix that has a high thermal stability close to that of (Pro-Hyp(R)-Gly)(10). These results clearly show that the empirical rule based on the conformational preference of pyrrolidine ring at each of X and Y residues should not be regarded as still valid, at least for predicting the stability of collagen models in which both X and Y residues have electronegative groups at the 4-position.     

Synthesis and luminescence properties of a blue-emitting Sr(3.5) Y(6.5) O(2) (PO(4) )(1.5) (SiO(4) )(4.5) :Eu(2+) phosphor

A novel blue‐emitting Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:Eu²⁺ phosphor was synthesized via a solid‐state reaction. Powder X‐ray diffraction (XRD) analysis demonstrated that the Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5 host had a hexagonal crystal structure in the space group P6₃/m and unit cell parameters a = 9.418 Å, c = 6.900 Å. The as‐prepared phosphor showed a blue emission and all the main emission peaks were located at around 466 nm for different excitation wavelengths of 297, 333 and 391 nm. The temperature dependence of the photoluminescence property was investigated in the range 20–250 °C, and the emission intensity decreased to 71% of the initial value at room temperature on increasing the temperature to 150 °C. According to the classical theory of fluorescent thermal quenching, the activation energy (ΔE) for the thermal quenching luminescence of the as‐prepared Sr_3.45Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:0.05Eu²⁺ phosphor was determined to be 0.20 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Role of tfdC(I)D(I)E(I)F(I) and tfdD(II)C(II)E(II)F(II) gene modules in catabolism of 3-chlorobenzoate by Ralstonia eutropha JMP134(pJP4)

The enzymes chlorocatechol-1,2-dioxygenase, chloromuconate cycloisomerase, dienelactone hydrolase, and maleylacetate reductase allow Ralstonia eutropha JMP134(pJP4) to degrade chlorocatechols formed during growth in 2,4-dichlorophenoxyacetate or 3-chlorobenzoate (3-CB). There are two gene modules located in plasmid pJP4, tfdC(I)D(I)E(I)F(I) (module I) and tfdD(II)C(II)E(II)F(II) (module II), putatively encoding these enzymes. To assess the role of both tfd modules in the degradation of chloroaromatics, each module was cloned into the medium-copy-number plasmid vector pBBR1MCS-2 under the control of the tfdR regulatory gene. These constructs were introduced into R. eutropha JMP222 (a JMP134 derivative lacking pJP4) and Pseudomonas putida KT2442, two strains able to transform 3-CB into chlorocatechols. Specific activities in cell extracts of chlorocatechol-1,2-dioxygenase (tfdC), chloromuconate cycloisomerase (tfdD), and dienelactone hydrolase (tfdE) were 2 to 50 times higher for microorganisms containing module I compared to those containing module II. In contrast, a significantly (50-fold) higher activity of maleylacetate reductase (tfdF) was observed in cell extracts of microorganisms containing module II compared to module I. The R. eutropha JMP222 derivative containing tfdR-tfdC(I)D(I)E(I)F(I) grew four times faster in liquid cultures with 3-CB as a sole carbon and energy source than in cultures containing tfdR-tfdD(II)C(II)E(II)F(II). In the case of P. putida KT2442, only the derivative containing module I was able to grow in liquid cultures of 3-CB. These results indicate that efficient degradation of 3-CB by R. eutropha JMP134(pJP4) requires the two tfd modules such that TfdCDE is likely supplied primarily by module I, while TfdF is likely supplied by module II.     

Induction of in vitro flowering in Dendrobium Madame Thong-In (Orchidaceae) seedlings is associated with increase in endogenous N(6)-(Delta (2)-isopentenyl)-adenine (iP) and N (6)-(Delta (2)-isopentenyl)-adenosine (iPA) levels

We analysed the endogenous cytokinin levels of Dendrobium Madame Thong-In seedlings grown in vitro during vegetative and flowering-inductive periods. HPLC was used to fractionate the extracts and radioimmunoassay (RIA) was used for assay of zeatin (Z), dihydrozeatin (DZ), N(6)-(Delta(2)-isopentenyl)-adenine (iP) and their derivatives. Coconut water used in experiments was found to contain high level (>136 pmol ml(-1)) of zeatin riboside (ZR). Protocorms and seedlings cultured in medium with coconut water were found to contain 0.5-3.9 pmol g(-1) FW of the cytokinins analysed. Seedlings (1.0-1.5 cm) cultured in flowering-inductive liquid medium containing 6-benzyladenine (BA, 4.4 muM) and coconut water (CW, 15%) contained up to 200 and 133 pmol g(-1) FW of iP and iPA, respectively. These levels were significantly higher than all other cytokinins analysed in seedlings of the same stage and were about 80- to 150-folds higher than seedlings cultured in non-inductive medium. During the transitional (vegetative to reproductive) stage, the endogenous levels of iP (178 pmol g(-1) FW) and iPA (63 pmol g(-1) FW) were also significantly higher than cytokinins in the zeatine (Z) and dihydrozeatin (DZ) families in the same seedlings. Seedlings that grew on inductive medium but remained vegetative contained lower levels of iPA. The importance of the profiles of iP and its derivatives in induction of in vitro flowering of D. Madame Thong-In is discussed.     

Biology of Bactrocera (Zeugodacus) tau (Walker) (Diptera: Tephritidae)

The biology of the fruit fly Bactrocera tau, an important horticultural pest, was studied under laboratory conditions at 25°C and 60–70% relative humidity on Cucurbita maxima. The duration of mating averaged 408.03 ± 235.93 min. After mating, the female fly had a preoviposition period of 11.7 ± 4.49 days. The oviposition rate was 9.9 ± 8.50 eggs and fecundity was 464.6 ± 67.98 eggs/female. Eggs were elliptical, smooth and shiny white, turning darker as hatching approached, and measured 1.30 ± 0.07 mm × 0.24 ± 0.04 mm. The chorion has polygonal microsculpturing and is species-specific with polygonal walls. The egg period lasts for 1.3 ± 0.41 days. The duration of the larval period is 1.2 ± 0.42, 1.7 ± 0.48 and 4.0 ± 0.94 days for first, second and third instars, respectively. Pupation occurs in the sand or soil and pupal periods are 7.0 ± 0.47 days. The life cycle from egg to adult was completed in 14.2 ± 1.69 days; the longevity of mated females and males was 130.33 ± 14.18 and 104.66 ± 31.21 days, respectively. At least two to three generations were observed from June 2008 to June 2009.     

The helix-coil transitions of poly (dA)-poly (dT) and poly (dA-dT)-poly (dA-dT)

Helix–coil transition curves are calculated for poly (dA) poly(dT) and poly (dA-dT) poly (dA-dT) using the integral equation approach of Goel and Montroll.⁵ The transitions are described by the loop entropy model with the exponent of the loop entropy factor, k, remaining an arbitrary constant. The theoretical calculations are compared with experimental transition curves of the two polymers. Results indicate that the stacking energies for these two polymers differ by about 1 kcal/mole of base pairs. Also, a fit between theory and experiment was not possible for k > 1.70.     

Spectroscopic investigations of Er(3+) :CdO-Bi(2) O(3) -B(2) O(3) glasses

This article reports on the optical properties of Er³⁺ ions doped CdO–Bi₂O₃–B₂O₃ (CdBiB) glasses. The materials were characterized by optical absorption and emission spectra. By using Judd–Ofelt theory, the intensity parameters Ω_λ (λ = 2, 4, 6) and also oscillatory strengths were calculated from the absorption spectra. The results were used to compute the radiative properties of Er³⁺:CdBiB glasses. The concentration quenching and energy transfer from Yb³⁺–Er³⁺ were explained. The stimulated emission cross‐section, full width at half maximum (FWHM) and FWHM × values are also calculated for all the Er³⁺:CdBiB glasses. Copyright © 2011 John Wiley & Sons, Ltd.     

Cationic (tripyrrinato)palladium(II) complexes

The formation of cationic palladium(II)complexes [TrpyPd^II]⁺X⁻ by salt metathesis of the respective trifluoroacetates with different salts of weakly coordinating anions X⁻ was investigated. With non-hydrolizable counterions, cationic mono- and dinuclear complexes are observed depending on the nature of the anion X⁻ and the solvent. The mononuclear cations, which are only formed with X = BAr^F, most probably carry a weakly bound molecule of dichloromethane at the fourth coordination site of Pd^II. When treated with diazoalkanes, only these are sufficiently reactive to form carbene complexes. Four- and five coordinate Lewis base adducts [TrpyPd^IIL]⁺ with L = CH₃NC, tBuNH₂, PMe₃, PEt₃ and PiPr₃ and [TrpyPd^IIL₂]⁺ with L = PMe₃ were prepared from the mononuclear cations [TrpyPd^II]⁺BAr^F−. From structural studies it becomes apparent, that the formation of stable five coordinate Pd^II species is restricted to medium size ligands and depends on the delicate balance between the steric influence of L and the strain, which is induced on the TrpyPd^II unit.     

Copper (II) and cobalt (II) complexes of chiral tetrathiafulvalene-oxazoline (TTF-OX) and tetrathiafulvalene-thiomethyl-oxazoline (TTF-SMe-OX) derivatives

Synthesis and single crystal X-ray structures of the first paramagnetic transition metal complexes containing chiral ethylenedithio-tetrathiafulvalene-oxazoline (EDT-TTF-OX) 1a-c and ethylenedithio-tetrathiafulvalene-thiomethyloxazoline 2 (EDT-TTF-(SMe)OX) ligands based on copper (II) and cobalt (II) are described. The racemic [EDT-TTF-OX][Cu(hfac)₂] complex 3a crystallizes in the triclinic centrosymmetric space group , whereas the enantiopure counterparts 3b-c crystallize in the triclinic non-centrosymmetric space group P1. Cu(II) adopts a distorted square pyramidal coordination geometry, a much weaker Cu?S_TTF interaction also being identified. The same coordination pattern around Cu(II) is observed in the complex [(rac)-EDT-TTF-(SMe)OX][Cu(hfac)₂] (4) in spite of the bidentate nature of the redox active ligand. DFT theoretical calculations afforded two equilibrium configurations for a corresponding model complex, in which the metal centre establishes secondary coordination either with one S_TTF or with the SMe group. The same ligand coordinates the cobalt (II) to afford the octahedral complex [(rac)-EDT-TTF-(SMe)OX][Co(hfac)₂] (5). In all these novel complexes, the paramagnetic centres are structurally and magnetically isolated. Cyclic voltammetry measurements show the stability of the radical cation species.