Two crystal structures of the leupeptin-trypsin complex.

Three-dimensional structures of trypsin with the reversible inhibitor leupeptin have been determined in two different crystal forms. The first structure was determined at 1.7 A resolution with R-factor = 17.7% in the trigonal crystal space group P3(1)21, with unit cell dimensions of a = b = 55.62 A, c = 110.51 A. The second structure was determined at a resolution of 1.8 A with R-factor = 17.5% in the orthorhombic space group P2(1)2(1)2(1), with unit cell dimensions of a = 63.69 A, b = 69.37 A, c = 63.01 A. The overall protein structure is very similar in both crystal forms, with RMS difference for main-chain atoms of 0.27 A. The leupeptin backbone forms four hydrogen bonds with trypsin and a fifth hydrogen bond interaction is mediated by a water molecule. The aldehyde carbonyl of leupeptin forms a covalent bond of 1.42 A length with side-chain oxygen of Ser-195 in the active site. The reaction of trypsin with leupeptin proceeds through the formation of stable tetrahedral complex in which the hemiacetal oxygen atom is pointing out of the oxyanion hole and forming a hydrogen bond with His-57.     

Molecular dissection of Na+ binding to thrombin

Na(+) binding near the primary specificity pocket of thrombin promotes the procoagulant, prothrombotic, and signaling functions of the enzyme. The effect is mediated allosterically by a communication between the Na(+) site and regions involved in substrate recognition. Using a panel of 78 Ala mutants of thrombin, we have mapped the allosteric core of residues that are energetically linked to Na(+) binding. These residues are Asp-189, Glu-217, Asp-222, and Tyr-225, all in close proximity to the bound Na(+). Among these residues, Asp-189 shares with Asp-221 the important function of transducing Na(+) binding into enhanced catalytic activity. None of the residues of exosite I, exosite II, or the 60-loop plays a significant role in Na(+) binding and allosteric transduction. X-ray crystal structures of the Na(+)-free (slow) and Na(+)-bound (fast) forms of thrombin, free or bound to the active site inhibitor H-d-Phe-Pro-Arg-chloromethyl-ketone, document the conformational changes induced by Na(+) binding. The slow --> fast transition results in formation of the Arg-187:Asp-222 ion pair, optimal orientation of Asp-189 and Ser-195 for substrate binding, and a significant shift of the side chain of Glu-192 linked to a rearrangement of the network of water molecules that connect the bound Na(+) to Ser-195 in the active site. The changes in the water network and the allosteric core explain the thermodynamic signatures linked to Na(+) binding and the mechanism of thrombin activation by Na(+). The role of the water network uncovered in this study establishes a new paradigm for the allosteric regulation of thrombin and other Na(+)-activated enzymes involved in blood coagulation and the immune response.     

Crystal structure at 1.63 A resolution of the native form of porcine beta-trypsin: revealing an acetate ion binding site and functional water network

The active center of a serine protease is the catalytic triad composed of His-57, Ser-195 and Asp-102. The existing crystal structure data on serine proteases have not fully answered a number of fundamental questions relating to the catalytic activity of serine proteases. The new high resolution native porcine beta-trypsin (BPT) structure is aimed at extending the knowledge on the conformation of the active site and the ordered water structure within and around the active site. The crystal structure of BPT has been determined at 1.63 A resolution. An acetate ion bound at the active site of a trypsin molecule by both classical hydrogen bonds and C-HellipsisO hydrogen bonds has been identified for the first time. A large network of water molecules extending from the recognition amino acid Asp-184 to the entry of the active site has been observed in the BPT structure. A detailed comparison with inhibitor complexes and autolysates indicates that the sulfate ion and the acetate ion bind at the same site of the trypsin molecule. The Ser-195 Cbeta-Ogamma-His-57 Nepsilon angle in the catalytic triad of BPT is intermediate between the corresponding values of the complex and native structure due to acetate ion binding. The network of waters from the recognition amino acid to the active site entry is probably the first ever complete picture of functional waters around the active site. Structural comparisons show that the functional waters involved in the binding of small molecule inhibitors and protease inhibitors are distinctly different.     

Structural and functional integrity of specificity and catalytic sites of trypsin

The aspartic acid residue at the bottom of the substrate-binding pocket of trypsin was replaced by glutamic acid through site-directed mutagenesis. The wild-type (Asp-189) and mutant (Glu-189) trypsinogens were expressed in E. coli, purified to homogeneity, activated by enterokinase, and tested on a series of fluorogenic tetrapeptide substrates. The substrates were of the general formula succinyl-Ala-Ala-Pro-X-AMC, where AMC is 7-amino-4-methylcoumarin and X is Lys, Arg, or Orn (ornithine). As compared to Asp-189 trypsin, the activity of Glu-189 trypsin on lysyl and arginyl substrates decreased by 3-4 orders of magnitude while its Km values did not significantly change. Lengthening the side-chain of Asp-189 by one methylene group could not be compensated for by shortening the side-chain of the substrate, since Glu-189 trypsin had no measurable activity on the ornithyl substrate. The replacement of Asp-189 with glutamic acid at the base of the substrate-binding pocket of trypsin appears to distort the structure of the critical transition-state complex. This could happen by disrupting interactions normally associated with Asp-189, and by altering the relative position of the scissile peptide bond in the active site of the enzyme.     

Structure of the complex formed by bovine trypsin and bovine pancreatic trypsin inhibitor. Crystal structure determination and stereochemistry of the contact region

The structure of the complex of bovine trypsin and bovine pancreatic trypsin inhibitor has been determined by crystal structure analysis at 2.8 Å resolution. The structure is closely similar to the model predicted from the structures of the components. The complex is a tetrahedral adduct with a covalent bond between the carbonyl carbon of Lys-15I of the inhibitor and the γ-oxygen of Ser-195 of the enzyme. The imidazole of His-57 is hydrogen-bonded to Asp-102 and the bound seryl γ-oxygen in accord with the histidine being charged. The negatively charged carbonyl oxygen of Lys-15I forms two hydrogen bonds with the amide nitrogens of Gly-193 and Ser-195. Protonation of the leaving group N-H of Ala-16I to form an acyl-complex requires a conformational change of the imidazole of His-57. The tetrahedral adduct is further stabilized by hydrogen bonds between groups at the leaving group side and inhibitor and enzyme, which would be weakened in the acyl-enzyme. The kinetic data of inhibitor-enzyme interaction are reconciled with the structural model, and relations between enzyme-inhibitor interaction and productive enzyme-substrate interaction are proposed.     

Enzyme:substrate hydrogen bond shortening during the acylation phase of serine protease catalysis

Atomic resolution (相似文献   

Crystal structure of recombinant human tissue kallikrein at 2.0 A resolution.

Human tissue kallikrein, a trypsin-like serine protease involved in blood pressure regulation and inflammation processes, was expressed in a deglycosylated form at high levels in Pichia pastoris, purified, and crystallized. The crystal structure at 2.0 A resolution is described and compared with that of porcine kallikrein and of other trypsin-like proteases. The active and S1 sites (nomenclature of Schechter I, Berger A, 1967, Biochem Biophys Res Commun 27:157-162) are similar to those of porcine kallikrein. Compared to trypsin, the S1 site is enlarged owing to the insertion of an additional residue, cis-Pro 219. The replacement Tyr 228 --> Ala further enlarges the S1 pocket. However, the replacement of Gly 226 in trypsin with Ser in human tissue kallikrein restricts accessibility of substrates and inhibitors to Asp 189 at the base of the S1 pocket; there is a hydrogen bond between O delta1Asp189 and O gammaSer226. These changes in the architecture of the S1 site perturb the binding of inhibitors or substrates from the modes determined or inferred for trypsin. The crystal structure gives insight into the structural differences responsible for changes in specificity in human tissue kallikrein compared with other trypsin-like proteases, and into the structural basis for the unusual specificity of human tissue kallikrein in cleaving both an Arg-Ser and a Met-Lys peptide bond in its natural protein substrate, kininogen. A Zn+2-dependent, small-molecule competitive inhibitor of kallikrein (Ki = 3.3 microM) has been identified and the bound structure modeled to guide drug design.     

Stereochemical analysis of peptide bond hydrolysis catalyzed by the aspartic proteinase penicillopepsin

The X-ray crystal structures of native penicillopepsin and of its complex with a synthetic analogue of the inhibitor pepstatin have been refined recently at 1.8-A resolution. These highly refined structures permit a detailed examination of peptide hydrolysis in the aspartic proteinases. Complexes of penicillopepsin with substrate and catalytic intermediates were modeled, by using computer graphics, with minimal perturbation of the observed inhibitor complex. A thallium ion binding experiment shows that the position of solvent molecule O39, between Asp-33(32) and Asp-213(215) in the native structure, is favorable for cations, a fact that places constraints on possible mechanisms. A mechanism for hydrolysis is proposed in which Asp-213(215) acts as an electrophile by protonating the carbonyl oxygen of the substrate, thereby polarizing the carbon-oxygen bond, a water molecule bound to Asp-33(32) (O284 in the native structure) attacks the carbonyl carbon as the nucleophile in a general-base mechanism, the newly pyramidal peptide nitrogen is protonated, either from the solvent after nitrogen inversion or by an internal proton transfer via Asp-213(215) from a hydroxyl of the tetrahedral carbon, and the tetrahedral intermediate breaks down in a manner consistent with the stereoelectronic hypothesis. The models permit the rationalization of observed subsite preferences for substrates and may be useful in predicting subsite preferences of other aspartic proteinases.     

Refined 2.5 Å X-ray crystal structure of the complex formed by porcine kallikrein A and the bovine pancreatic trypsin inhibitor: Crystallization,patterson search,structure determination,refinement, structure and comparison with its components and with the bovine trypsin-pancreatic trypsin inhibitor complex

The complex formed by porcine pancreatic kallikrein A with the bovine pancreatic trypsin inhibitor (PTI) has been crystallized at pH 4 in tetragonal crystals of space group P4₁2₁2 with one molecule per asymmetric unit. Its crystal structure has been solved applying Patterson search methods and using a model derived from the bovine trypsin-PTI complex (Huber et al., 1974) and the structure of porcine pancreatic kallikrein A (Bode et al., 1983). The kallikrein-PTI model has been crystallographically refined to an R-value of 0·23 including X-ray data to 2·5 Å.The root-mean-square deviation, including all main-chain atoms, is 0·45 Å and 0·65 Å for the PTI and for the kallikrein component, respectively, compared with the refined models of the free components. The largest differences are observed in external loops of the kallikrein molecule surrounding the binding site, particularly in the C-terminal part of the intermediate helix around His172. Overall, PTI binding to kallikrein is similar to that of the trypsin complex. In particular, the conformation of the groups at the active site is identical within experimental error (in spite of the different pH values of the two structures). Ser195 OG is about 2·5 Å away from the susceptible inhibitor bond Lys15 C and forms an optimal 2·5 Å hydrogen bond with His57 NE.The PTI residues Thr11 to Ile18 and Val34 to Arg39 are in direct contact with kallikrein residues and form nine intermolecular hydrogen bonds. The reactive site Lys15 protrudes into the specificity pocket of kallikrein as in the trypsin complex, but its distal ammonium group is positioned differently to accommodate the side-chain of Ser226. Ser226 OG mediates the ionic interaction between the ammonium group and the carboxylate group of Asp189. Model-building studies indicate that an arginine side-chain could be accommodated in this pocket. The PTI disulfide bridge 14–38 forces the kallikrein residue Tyr99 to swing out of its normal position. Model-building experiments show that large hydrophobic residues such as phenylalanine can be accommodated at this (S2) site in a wedge-shaped hydrophobic cavity, which is formed by the indole ring of Trp215 and by the phenolic side-chain of Tyr99, and which opens towards the bound inhibitor/substrate chain. Arg17 in PTI forms a favorable hydrogen bond and van der Waals' contacts with kallikrein residues, whereas the additional hydrogen bond formed in the trypsin-PTI complex between Tvr39 OEH and Ile19 N is not possible The kallikrein binding site offers a qualitative explanation of the unusual binding and cleavage at the N-terminal Met-Lys site of kininogen. Model-building experiments suggest that the generally restricted capacity of kallikrein to bind protein inhibitors with more extended binding segments might be explained by steric hindrance with some extruding external loops surrounding the kallikrein binding site (Bode et al., 1983).     

Structure of the hirulog 3-thrombin complex and nature of the S' subsites of substrates and inhibitors.

The X-ray crystallographic structure of the human alpha-thrombin complex with hirulog 3 (a potent, noncleavable hirudin-based peptide of the "hirulog" class containing a beta-homoarginine at the scissile bond), which is isomorphous with that of the hirugen-thrombin crystal structure, was solved at 2.3-A resolution by starting with a model for thrombin derived from the hirugen-thrombin complex and was refined by restrained least squares methods (R = 0.132). Residues of hirulog 3 were well-defined in the electron density, which included most of the pentaglycine linker and the C-terminal helical turn that was disordered in a related structure of thrombin with hirulog 1. The interactions of D-Phe1'-Pro2'-beta-homoArg3' with the active site of thrombin were essentially identical to those of related structures of PPACK- (D-Phe-Pro-Arg chloromethyl ketone) and hirulog 1-thrombin, with the guanidinium function of the arginyl P1 residue forming a hydrogen-bonding ion pair with Asp189 of the S1 site. A noticeable shift in the CA atom of beta-homoArg3' due to the methylene insertion displaces the scissile bond from attack by Ser195, thus imparting proteolytic stability to the beta-homoArg hirulog derivative. Resolution of the pentaglycine spacer, linking N- and C-terminal functional domains into a single oligopeptide bivalent inhibitor, permitted delineation of corresponding S' subsites of thrombin. The position of Gly4' (P1') is stabilized by three hydrogen bonds with His57, Lys60F, and Ser195, while the conformational angles maintained in a strained, nonallowed configuration for non-glycyl amino acids.(ABSTRACT TRUNCATED AT 250 WORDS)