Structure and magnetic properties of LnIII[Ru2(CO3)4] · 8H2O

Ln^III[Ru₂(CO₃)₄] · 8H₂O (Ln = Gd, Nd, Ho, Yb) is formed from the reaction of Ln^III and [Ru₂(CO₃)₄]^3? in water. These Ln^III materials have a 3D network structure composed of linked chains and μ_n-CO₃ linkages to both Ru and Ln^III sites, and are best described as Ln^III(OH₂)₄[Ru₂(CO₃)₄]_1/2[Ru₂(CO₃)₄(OH₂)₂]_1/2 · 3H₂O. Complete characterization of the Gd^III species is presented, as the other Ln^III are isostructural and exhibit large spin–orbit coupling leading to complex magnetic behavior. Magnetic ordering is not observed above 2 K.     

Response of the ArcCHECK® device at 6 MV and 15 MV for VMAT and IMRT quality control

PurposeTo study the response of the ArcCHECK® device as VMAT and IMRT verification system.MethodsVarious tests analyzing the linearity, the repeatability and the angular dependence of the device response, its dependence with the pulse repetition rate and the leakage losses were performed. The long-term response in dose measurements and the uniformity of the detectors conforming the system were controlled using a statistical process control program. The Elekta Infinity™ 6 and 15 MV photon beams were used.ResultsThe device showed excellent repeatability and linearity. The differences between the responses obtained for any pair of angular incidences were less than 2%. The absorbed dose increased by 3% when the pulse repetition rate varied from 50 to 600 MU/min. Results are in overall agreement with those found in previous works for the ArcCHECK®, in which a reduced number of the device diodes were analyzed, and for the MapCheck®, an older 2D device that used the same diodes. Charge losses were found to be negligible except for some of the diodes of the device. The statistical process control program is a very useful tool to control the correct functioning of the device in the long term.ConclusionsThe results of the analysis carried out indicate that the working and stability conditions of the ArcCHECK® device are adequate for its purpose. The dependence with the pulse repetition rate should be considered when VMAT or similar treatments are evaluated. A control program for the statistical monitoring of the device would be desirable and useful.     

Genotype × region and genotype × production level interactions in Holstein cows

The identification of the presence of genotype by environment interaction effects on important traits in Holstein cattle allows for the use of international genetic evaluations and a more efficient design of regional genetic evaluation programmes. The aim of this study was to determine the genotype × environment interaction effects in Chilean Holstein dairy cattle through the analysis of records corresponding to calvings between 1998 and 2015. Herds were classified in the central and southern regions of Chile based on herd location as well as by high and low levels of production environments based on the fat plus protein yield averages per herd within each region. The central region has a Mediterranean climate and a confined production system while the southern region has a humid temperate climate and a production system based on grazing with supplementation. Traits studied were milk yield (MY), fat yield (FY), protein yield (PY), fat content (FC) and protein content (PC) by lactation, age at first calving (AFC) and calving interval (CI). Several four-trait mixed animal models were applied to environmental category data as different traits, which included herd-year-calving season (herd-year-birth season for AFC) and lactation number as fixed effects, and animal additive genetic, sire-herd, permanent environment and residual effects as random effects. Genetic correlations (r_g) for MY, FY, FC, PC and CI were found to decrease as differences between environmental categories increased. The r_g between the most extreme environmental categories considered in this study for AFC (0.26) was the only one found statistically lower than 0.60. Genetic correlation values statistically lower than 0.80 (P < 0.05) were observed for AFC, CI, MY, FY and PY between some environmental categories. If separate genetic evaluations are adopted as practical criteria when the value of r_g is lower than 0.60, the consequence of improving a multi-trait economic breeding objective in this population is likely to be small unless extreme environmental categories are considered. However, a moderate decrease in selection response and re-ranking of selection candidates is expected for AFC, CI and yield traits when selection is performed in different environmental conditions. Genotype × environment interaction effects involving production systems in a Mediterranean climate and confinement vs. Temperate Oceanic climate and grazing with supplementation, and between two fat plus protein yield level categories within each environment, were at most moderate for the studied traits.     

Optimized methodology for extraction of (1 → 3)(1 → 6)-β-d-glucan from Saccharomyces cerevisiae and in vitro evaluation of the cytotoxicity and genotoxicity of the corresponding carboxymethyl derivative

The cell wall of Saccharomyces cerevisiae is an important source of β-d-glucan, a glucose homopolymer with immunostimulant properties. The standard methodologies described for its extraction involve acid and alkaline washings, which degrade part of its glucose chains and reduce the final yield. In the present study, an optimized methodology for extraction of β-d-glucan from S. cerevisiae cells, involving sonication and enzyme treatment, with a yield of 11.08 ± 0.19%, was developed. The high-purity (1 → 3)(1 → 6)-β-d-glucan was derivatized to carboxymethyl-glucan (CM-G). In vitro tests with CM-G in Chinese hamster epithelial cells (CHO-k1) did not reveal any cytotoxic or genotoxic effects or influences of this molecule on cell viability. The method described here is a convenient alternative for the extraction of (1 → 3)(1 → 6)-β-d-glucan under mild conditions without the generation of wastes that could be potentially harmful to the environment.     

High yield purification of JNK1β1 and activation by in vitro reconstitution of the MEKK1 → MKK4 → JNK MAPK phosphorylation cascade

The c-Jun N-terminal kinase (JNK) pathway forms part of the mitogen-activated protein kinase (MAPK) signaling pathways comprising a sequential three-tiered kinase cascade. Here, an upstream MAP3K (MEKK1) phosphorylates and activates a MAP2K (MKK4 and MKK7), which in turn phosphorylates and activates the MAPK, JNK. The C-terminal kinase domain of MEKK1 (MEKK-C) is constitutively active, while MKK4/7 and JNK are both activated by dual phosphorylation of S/Y, and T/Y residues within their activation loops, respectively. While improvements in the purification of large quantities of active JNKs have recently been made, inadequacies in their yield, purity, and the efficiency of their phosphorylation still exist. We describe a novel and robust method that further improves upon the purification of large yields of highly pure, phosphorylated JNK1β1, which is most suitable for biochemical and biophysical characterization. Codon harmonization of the JNK1β1 gene was used as a precautionary measure toward increasing the soluble overexpression of the kinase. While JNK1β1 and its substrate ATF2 were both purified to >99% purity as GST fusion proteins using GSH-agarose affinity chromatography and each cleaved from GST using thrombin, constitutively-active MEKK-C and inactive MKK4 were separately expressed in E. coli as thioredoxin-His₆-tagged proteins and purified using urea refolding and Ni²⁺-IMAC, respectively. Activation of JNK1β1 was then achieved by successfully reconstituting the JNK MAPK activation cascade in vitro; MEKK-C was used to activate MKK4, which in turn was used to efficiently phosphorylate and activate large quantities of JNK1β1. Activated JNK1β1 was thereafter able to phosphorylate ATF2 with high catalytic efficiency.     

In-vivo dosimetry for field sizes down to 6 × 6 mm2 in shaped beam radiosurgery with microMOSFET

The aim of this study is to evaluate microMOSFET as in-vivo dosimeter in 6 MV shaped-beam radiosurgery for field sizes down to 6 × 6 mm². A homemade build-up cap was developed and its use with microMOSFET was evaluated down to 6 × 6 mm². The study with the homemade build-up cap was performed considering its influence on field size over-cover occurring at surface, achievement of the overall process of electronic equilibrium, dose deposition along beam axis and dose attenuation. An optimized calibration method has been validated using MOSFET in shaped-beam radiosurgery for field sizes from 98 × 98 down to 18 × 18 mm². The method was detailed in a previous study and validated in irregular field shapes series measurements performed on a head phantom. The optimized calibration method was applied to microMOSFET equipped with homemade build-up cap down to 6 × 6 mm². Using the same irregular field shapes, dose measurements were performed on head phantom. MicroMOSFET results were compared to previous MOSFET ones. Additional irregular field shapes down to 8.8 × 8.8 mm² were studied with microMOSFET. Isocenter dose attenuation due to the homemade build-up cap over the microMOSFET was near 2% irrespective of field size. Our results suggested that microMOSFET equipped with homemade build-up cap is suitable for in-vivo dosimetry in shaped-beam radiosurgery for field sizes down to 6 × 6 mm² and therefore that the required build-up cap dimensions to perform entrance in-vivo dosimetry in small-fields have to ensure only partial charge particle equilibrium.     

New coordination polymers based on a novel polynitrile ligand: Synthesis,structure and magnetic properties of the series [M(tcnoetOH)2(4,4′-bpy)(H2O)2] (tcnoetOH− = [(NC)2CC(OCH2CH2OH)C(CN)2]−; M = Fe,Co and Ni)

A novel polynitrile anionic ligand, tcnoetOH^?(=[(NC)₂CC(OCH₂CH₂OH)C(CN)₂]^?), has been synthesized by a one-pot reaction from a cyclic acetal and malononitrile. This ligand has been successfully used to prepare, with 4,4′-bpy as co-ligand, a novel series of coordination polymers formulated as [M(tcnoetOH)₂(4,4′-bpy)(H₂O)₂] with M(II) = Fe (1), Co (2) and Ni (3). These isostructural compounds present a linear chain structure consisting of octahedrally coordinated metal ions bridged by trans 4,4′-bpy ligands. The coordination sphere of the metal ions is completed with two terminal tcnoetOH^? ligand and two water molecules. The magnetic properties indicate that the three compounds are paramagnetic, as expected from the long 4,4′-bpy bridge connecting the metal atoms. Their magnetic properties have been fitted with a model of isolated ions including a zero field splitting for the Fe(II) and Ni(II) derivatives.     

sHER-2 : un nouveau marqueur ?

The extracellular domain of the HER-2 (ERBB2) oncoprotein (p105^HER-2, ECD HER-2) is shed in the serum and can be detected by immunoassay. The currently approved cutoff for an elevated HER-2 ECD is greater than 15 ng/mL. HER-2 ECD is attractive as a potentially useful serum biomarker. In metastatic breast cancer, serum assay of HER-2 ECD is recommended to assess HER-2 status when unknown in primary tumor or metastatic biopsy is not feasible. In that case, it has been recommended to consider a 50 ng/mL serum HER-2 ECD cutoff as criteria to select patients for HER-2 targeted therapy. It might offer additional prognostic or predictive value compared with HER-2 tumor tissue testing. In addition, it can be measured serially and might be able to monitor treatment response, predict relapse or provide a real-time assessment of HER-2 status at metastatic disease.     

‘3 + 1’ mixed-ligand oxorhenium(V) complexes and their inhibition of the cysteine proteases cathepsin B and cathepsin K

The synthesis of several new oxorhenium(V) complexes containing the ‘3 + 1’ mixed-ligand donor set, ReO(SXS)(SR) (where X = S, O, N(R′); R = alkyl, aryl, heterocylce; R′ = H, alkyl, aryl), is described. The X-ray structure for four of these complexes ReO(SN(Ph)S)(SPh) (6), ReO(SN(CH₂CH₂NMe₂)S)(SPhOMe-p) (10), ReO(SOS)(SPh) (29) and ReO(SOS)(SPhNO₂-p) (30) was determined. The inhibitory activity of all of the oxorhenium(V) complexes reported herein was evaluated against the cysteine proteases cathepsin B and K in vitro. Compound 25, ReO(SSS)(S-4py) · HCl, was the best inhibitor of the series against cathepsin B with an IC₅₀ of 10 nM. Several of the complexes exhibited specificity for cathepsin B over K, suggesting that oxorhenium(V) complexes can be designed to be enzyme specific. The results described in this paper show that the oxorhenium(V) ‘3 + 1’ complexes are potent inhibitors of cathepsin B and K, constituting promising potential for the treatment of cancer and osteoporosis, respectively.     

Syntheses and characterization of Cp2Ce[η3-N(QPPh2)2] (Q = S,Se) and Cp2Ce[η3-N(SPiPr2)(SePPh2)]

The compounds Cp₂Ce[η³-N(QPPh₂)₂] (Q = S (1), Se (2)) and Cp₂Ce[η³-N(SPⁱPr₂)(SePPh₂)] (3) have been synthesized from the protonolysis reactions between Cp₃Ce and HN(QPPh₂)₂ or HN(SPⁱPr₂)(SePPh₂) in THF. The structures of these compounds have been determined by X-ray crystallographic methods. The three compounds have similar structures in which the ligands are coordinated to Cp₂Ce moiety in an η³ fashion through the two chalcogen atoms and an N atom. Whereas the ⁷⁷Se NMR resonances are normal the ³¹P NMR resonances are shifted to much lower frequencies than in similar rare-earth compounds.     

Biomining — biotechnologies for extracting and recovering metals from ores and waste materials

1. Download : Download high-res image (169KB)
2. Download : Download full-size image

     

Crystal structure,magnetic and thermal properties of the one-dimensional complex [Nd(pzam)3(H2O)Mo(CN)8] · H2O

The new d–f cyanido-bridged 1D assembly [Nd(pzam)₃(H₂O)Mo(CN)₈] · H₂O was prepared by self-assembly of pyrazine-2-carboxamide (pzam), Nd(NO₃) · nH₂O and (Bu₃NH)₃[Mo(CN)₈] · 4H₂O in acetonitrile. X-ray crystallographic studies indicate that the complex comprises chains of alternating, cyanido-bridged [Nd(pzam)₃(H₂O)]³⁺ and Mo(CN)₈]^3? fragments. The magneto-structural properties have been studied by field-dependent magnetization and specific heat measurements at low temperatures (?0.3 K). Below ≈10 K the Nd(III) moment is well approximated by an effective spin S = 1/2, with anisotropic g-tensor. The exchange coupling between the Nd(III) and the Mo(V) spins S = 1/2 along the structural chains is found to be ferromagnetic, with J/k_B = 1.8 ± 0.2 K and approximately XY (planar) anisotropy. No evidence for 3D interchain magnetic ordering is found. A comparison with magneto-structural data of other cyanido-bridged complexes involving the Nd(III) ion is presented.     

The effect of dissolved oxygen concentrations on (1 → 3)- and (1 → 6)-β-glucanase production by Acremonium sp. IMI 383068 in batch culture

The influence of dissolved oxygen tension (DOT) on the production of extracellular (1 → 3)- and (1 → 6)-β-glucanases by the fungus Acremonium sp. IMI 383068 was investigated in batch culture. The controlled DOT levels at which cultures were grown affected the measured (1 → 3)-β-glucanase specific activities, but these effects were less marked on the measured (1 → 6)-β-glucanase specific activities. There appeared to be no direct link between the branching frequency of the fungus as reflected by its hyphal growth unit, and changing DOT levels. Whether pustulan or scleroglucan were used as the sole carbon source also affected production of these enzymes and their response to varying DOT. The measured (1 → 3)-β-glucanase specific activities were generally higher with scleroglucan, mainly because of the production of an extra active (1 → 3)-β-glucanase whereas pustulan grown cells produced a corresponding inactive protein with an identical electrophoretic mobility by SDS-PAGE and N-terminal amino acid sequence. With pustulan grown cells, DOT levels had comparatively little influence on the optimal measured specific activities of the (1 → 3)-β-glucanases, while with scleroglucan, they increased as DOT increased.     

Mechanisms of mechanosensing — mechanosensitive channels,function and re-engineering

1. Download : Download high-res image (317KB)
2. Download : Download full-size image

     

Heavy enzymes — experimental and computational insights in enzyme dynamics

1. Download : Download high-res image (246KB)
2. Download : Download full-size image

     

Neumark-Nord 2 – A multiphase Middle Palaeolithic open-air site in the Geisel Valley (Central Germany)

The lake basin Neumark-Nord 2 (NN 2) is located in the Geisel Valley in Saxony-Anhalt (Germany). It was scientifically investigated between 2003 and 2008. The sediment sequence, which is about 10 to 11 m thick, consists of limnic deposits, mostly silts mixed with clays and sands. Sedimentological as well as palynological, malacological and palaeomagnetic investigations, supported by absolute datings, date the entire sequence into the Eemian and Early Weichselian. Within the deposits several archaeological find horizons were discovered. Neumark-Nord 2/2 (NN 2/2) at the beginning of the Eemian and Neumark-Nord 2/0 (NN 2/0) with an early Weichselian were the most important archaeological horizons. Both find horizons represent former lake shore sites, where numerous crushed animal bones and other faunal debris were found, which can be regarded as remains of hunted game. With regard to the rich lithic material, both find horizons differ remarkably. In NN2/2, a simple artefact spectrum with a certain Levallois component and a dominance of denticulated, notched and laterally retouched specimens. In NN 2/0, on the other hand, bifacial tools such as backed knives and sometimes finely retouched scrapers are dominant, while the Levallois component fades completely into the background. Thus, NN 2 is one of the few open-air sites in archaeological landscape of Central German where several middle Palaeolithic find horizons occur in superposition.