Time-resolved OH → EH transition of the aberrant ba3 oxidase from Thermus thermophilus

The kinetics of single-electron injection into the oxidized nonrelaxed state (O_H → E_H transition) of the aberrant ba₃ cytochrome oxidase from Thermus thermophilus, noted for its lowered efficiency of proton pumping, was investigated by time-resolved optical spectroscopy. Two main phases of intraprotein electron transfer were resolved. The first component (τ ∼ 17 μs) reflects oxidation of Cu_A and reduction of the heme groups (low-spin heme b and high-spin heme a₃ in a ratio close to 50:50). The subsequent component (τ ∼ 420 μs) includes reoxidation of both hemes by Cu_B. This is in significant contrast to the O_H → E_H transition of the aa₃-type cytochrome oxidase from Paracoccus denitrificans, where the fastest phase is exclusively due to transient reduction of the low-spin heme a, without electron equilibration with the binuclear center. On the other hand, the one-electron reduction of the relaxed O state in ba₃ oxidase was similar to that in aa₃ oxidase and only included rapid electron transfer from Cu_A to the low-spin heme b. This indicates a functional difference between the relaxed O and the pulsed O_H forms also in the ba₃ oxidase from T. thermophilus.     

Preparation, crystal structures and spectroscopic properties of novel [MCl3 − n(P)3 + n] (M = Co, Rh; n = 0, 1, 2 or 3) series of complexes containing tripodal tridentate phosphine, 1,1,1-tris(dimethylphosphinomethyl)ethane

Cobalt(III) and rhodium(III) complexes of the series of [M^IIICl_3 − n(P)_3 + n]ⁿ⁺ (M = Co or Rh; n = 0, 1, 2 or 3) have been prepared with the use of 1,1,1-tris(dimethylphosphinomethyl)ethane (tdmme) and mono- or didentate phosphines. The single-crystal X-ray analyses of both series of complexes revealed that the M-P and M-Cl bond lengths were dependent primarily on the strong trans influence of the phosphines, and secondarily on the steric congestion around the metal center resulting from the coordination of several phosphine groups. In fact, the M-P(tdmme) bonds became longer in the order of [MCl₃(tdmme)] < [MCl₂(tdmme)(PMe₃)]⁺ < [MCl(tdmme)(dmpe)]²⁺ (dmpe = 1,2-bis(dimethylphosphino)ethane) < [M(tdmme)₂]³⁺ for both Co^III and Rh^III series of complexes, while the M-Cl bond lengths were shortened in this order (except for [M(tdmme)₂]³⁺). Such a steric congestion around the metal center can also account for the structural and spectroscopic characteristics of the series of complexes, [MCl(tdmme)(dmpm, dmpe or dmpp)]²⁺ (dmpm = bis(dimethylphosphino)methane, dmpp = 1,3-bis(dimethylphosphino)propane). The X-ray analysis for [CoCl(tdmme)(dmpm or dmpe)](BF₄)₂ showed that all Co-P bonds in the dmpm complex were shorter by 0.03-0.04 Å than those in the dmpe complex. Furthermore, the first d-d transition energy of the Co^III complexes and the ¹J_Rh-P(tdmme) coupling constants observed for the Rh^III complexes indicated an unusual order in the coordination bond strengths of the didentate diphosphines, i.e., dmpm > dmpe > dmpp.     

Effect of substituent dtp to optical properties of heterobimetallic M/Ag/S nest-shaped clusters (M = Mo, W)

Clusters [MoS₄Ag₃(PPh₃)₃{S₂P(OPrⁱ)₂}] (1), [WS₄Ag₃(PPh₃)₃{S₂P(OPrⁱ)₂}] (2) and [WOS₃Ag₃(PPh₃)₃{S₂P(OPrⁱ)₂}] (3) were synthesized by the reaction of (NH₄)₂MoS₄/(NH₄)₂WS₄, (NH₄)₂WOS₃ with Ag[S₂P(OPrⁱ)₂]. Their structures have been characterized by X-ray diffraction. The clusters consist of a distorted tetrahedral MS₄ (or MOS₃) (M = Mo, W) with three Ag atoms and three sulfur atom bridges (Fig. 1), and resemble roughly that of cubane-like clusters. The nonlinear optical (NLO) properties were studied with an 8 ns pulsed laser at 532 nm. Its optical response to the incident light exhibits good optical absorptive and refractive effects, with α₂ = 1.56 × 10⁻¹⁰ m W⁻¹, n₂ = 3.87 × 10⁻¹⁷ m² W⁻¹ for cluster 1; α₂ = 1.33 × 10⁻¹⁰ m W⁻¹, n₂ = 6.52 × 10⁻¹⁷ m² W⁻¹for cluster 2; and α₂ = 2.54 × 10⁻¹⁰ m W⁻¹, n₂ = 4.07 × 10⁻¹⁷ m² W⁻¹ for cluster 3 for a 1.56 × 10⁻⁴ mol dm⁻³ CH₂Cl₂ solution.     

Kinetic and thermodynamic properties of the folding and assembly of formate dehydrogenase

The folding mechanism and stability of dimeric formate dehydrogenase from Candida methylica was analysed by exposure to denaturing agents and to heat. Equilibrium denaturation data yielded a dissociation constant of about 10⁻¹³ M for assembly of the protein from unfolded chains and the kinetics of refolding and unfolding revealed that the overall process comprises two steps. In the first step a marginally stable folded monomeric state is formed at a rate (k₁) of about 2 × 10⁻³ s⁻¹ (by deduction k₋₁ is about10⁻⁴ s⁻¹) and assembles into the active dimeric state with a bimolecular rate constant (k₂) of about 2 × 10⁴ M⁻¹ s⁻¹. The rate of dissociation of the dimeric state in physiological conditions is extremely slow (k₋₂ ∼ 3 × 10⁻⁷ s⁻¹).     

ATP-triggered ADP release from the asymmetric chaperonin GroEL/GroES/ADP7 is not the rate-limiting step of the GroEL/GroES reaction cycle

The GroEL/GroES protein folding chamber is formed and dissociated by ATP binding and hydrolysis. ATP hydrolysis in the GroES-bound (cis) ring gates entry of ATP into the opposite unoccupied trans ring, which allosterically ejects cis ligands. While earlier studies suggested that hydrolysis of cis ATP is the rate-limiting step of the cycle (t_½ ∼ 10 s), a recent study suggested that ADP release from the cis ring may be rate-limiting (t_½ ∼ 15-20 s). Here we have measured ADP release using a coupled enzyme assay and observed a t_½ for release of ?4-5 s, indicating that this is not the rate-limiting step of the reaction cycle.     

Electronic circular dichroism of monomethyl [O, O, O]-phosphate and [O, O, O]-thiophosphate revisited

Phosphoryl-transfer reactions have long been of interest due to their importance in maintaining numerous cellular functions. A phosphoryl-transfer reaction results in two possible stereochemical outcomes: either retention or inversion of configuration at the transferred phosphorus atom. When the product is phosphate, isotopically-labeled [¹⁶O, ¹⁷O, ¹⁸O]-phosphate derivatives can be used to distinguish these outcomes; one oxygen must be replaced by sulfur or esterified to achieve isotopic chirality. Conventionally, stereochemical analysis of isotopically chiral phosphate has been based on ³¹P NMR spectroscopy and involves complex chemical or enzymatic transformations. An attractive alternative would be direct determination of the enantiomeric excess using chiroptical spectroscopy. (S)-Methyl-[¹⁶O, ¹⁷O, ¹⁸O]-phosphate (MePi^∗), 7 and enantiomeric [¹⁶O, ¹⁷O, ¹⁸O]-thiophosphate (TPi^∗), 10, were previously reported to exhibit weak electronic circular dichroism (ECD), although with 10 the result was considered to be uncertain. We have now re-examined the possibility that excesses of 7 and 10 enantiomers can be detected by ECD spectrometry, using both experimental and theoretical approaches. 7 and both the (R) and (S) enantiomers of 10 (10a, 10b) were synthesized by the ‘Oxford route’ and characterized by ¹H, ³¹P and ¹⁷O NMR, and by MS analysis. Weak ECD could be found for 7, with suboptimal S/N. No significant ECD could be detected for the 10 enantiomers.Time-dependent DFT (TDDFT) calculations of the electronic excitation energies and rotational strengths of the same three enantiomers were carried out using the functional B3LYP and the basis set 6-311G^∗∗. The isotopically-perturbed geometries were predicted using the anharmonic vibrational frequency calculational code in GAUSSIAN 03. In the case of 10, calculations were also carried out for the hexahydrated complex to investigate the influence of the aqueous solvent. The predicted excitation wavelengths are greater than the observed wavelengths, a not unusual result of TDDFT calculations. The predicted anisotropy ratios are 2.9 × 10⁻⁵ for 7, −5.3 × 10⁻⁶ for 10a/b, and 1.7 × 10⁻⁶ for 10a/b⋅(H₂O)₆. For 7 the predicted anisotropy ratio approximates that observed in this work, 4.5 × 10⁻⁵ at 208 nm. For 10a/b, the upper limits of the experimental anisotropy ratios (<5 × 10⁻⁶ at 225 nm, pH 9; <5 × 10⁻⁶ at 236 nm, pH 12) are comparable to the predicted magnitude of the value for 10a/b. The lower predicted value for 10a/b · (H₂O)₆ suggests that the aqueous environment affects the ECD significantly. Altogether, the TDDFT calculations together with a stereochemical analysis based on NMR and the MS data support the conclusion that the experimental ECD results for MePi^∗ and TPi^∗ may be reliable in order of magnitude.     

Structural and thermodynamic characterization of metal ion binding in Streptococcus suis Dpr

The use of protein cages for the creation of novel inorganic nanomaterials has attracted considerable attention in recent years. Ferritins are among the most commonly used protein cages in nanoscience. Accordingly, the binding of various metals to ferritins has been studied extensively. Dps (DNA-binding protein from starved cells)-like proteins belong to the ferritin superfamily. In contrast to ferritins, Dps-like proteins form 12-mers instead of 24-mers, have a different ferroxidase center, and are able to store a smaller amount of iron atoms in a hollow cavity (up to ∼ 500, instead of the ∼ 4500 iron atoms found in ferritins). With the exception of iron, the binding of other metal cations to Dps proteins has not been studied in detail. Here, the binding of six divalent metal ions (Zn²⁺, Mn²⁺, Ni²⁺, Co²⁺, Cu²⁺, and Mg²⁺) to Streptococcus suisDps-like peroxide resistance protein (SsDpr) was characterized by X-ray crystallography and isothermal titration calorimetry (ITC). All metal cations, except for Mg²⁺, were found to bind to the ferroxidase center similarly to Fe²⁺, with moderate affinity (binding constants between 0.1 × 10⁵ M^− 1 and 5 × 10⁵ M^− 1). The stoichiometry of binding, as deduced by ITC data, suggested the presence of a dication ferroxidase site. No other metal binding sites were identified in the protein. The results presented here demonstrate the ability of SsDpr to bind various metals as substitutes for iron and will help in better understanding protein-metal interactions in the Dps family of proteins as potential metal nanocontainers.     

An endo-(1→3)-β-d-glucanase from the scallop Chlamys albidus: catalytic properties, cDNA cloning and secondary-structure characterization

An endo-(1→3)-β-d-glucanase (L₀) with molecular mass of 37 kDa was purified to homogeneity from the crystalline style of the scallop Chlamys albidus. The endo-(1→3)-β-d-glucanase was extremely thermolabile with a half-life of 10 min at 37 °C. L₀ hydrolyzed laminaran with K_m ∼ 0.75 mg/mL, and catalyzed effectively transglycosylation reactions with laminaran as donor and p-nitrophenyl β d-glucoside as acceptor (K_m ∼ 2 mg/mL for laminaran) and laminaran as donor and as acceptor (K_m ∼ 5 mg/mL) yielding p-nitrophenyl β d-glucooligosaccharides (n = 2-6) and high-molecular branching (1→3),(1→6)-β-d-glucans, respectively. Efficiency of hydrolysis and transglycosylation processes depended on the substrate structure and decreased appreciably with the increase of the percentage of β-(1→6)-glycosidic bonds, and laminaran with 10% of β-(1→6)-glycosidic bonds was the optimal substrate for both reactions. The CD spectrum of L₀ was characteristic for a protein with prevailing β secondary-structural elements. Binding L₀ with d-glucose as the best acceptor for transglycosylation was investigated by the methods of intrinsic tryptophan fluorescence and CD. Glucose in concentration sufficient to saturate the enzyme binding sites resulted in a red shift in the maximum of fluorescence emission of 1-1.5 nm and quenching the Trp fluorescence up to 50%. An apparent association constant of L₀ with glucose (K_a = 7.4 × 10⁵ ± 1.1 × 10⁵ M⁻¹) and stoichiometry (n = 13.3 ± 0.7) was calculated. The cDNA encoding L₀ was sequenced, and the enzyme was classified in glycoside hydrolases family 16 on the basis of the amino acid sequence similarity.     

Nautilus pompilius hemocyanin: 9 A cryo-EM structure and molecular model reveal the subunit pathway and the interfaces between the 70 functional units

Hemocyanins are giant extracellular oxygen carriers in the hemolymph of many molluscs. Nautilus pompilius (Cephalopoda) hemocyanin is a cylindrical decamer of a 350 kDa polypeptide subunit that in turn is a “pearl-chain” of seven different functional units (FU-a to FU-g). Each globular FU has a binuclear copper centre that reversibly binds one O₂ molecule, and the 70-FU decamer is a highly allosteric protein. Its primary structure and an 11 Å cryo-electron microscopy (cryo-EM) structure have recently been determined, and the crystal structures of two related FU types are available in the databanks. However, in molluscan hemocyanin, the precise subunit pathway within the decamer, the inter-FU interfaces, and the allosteric unit are still obscure, but this knowledge is crucial to understand assembly and allosterism of these proteins. Here we present the cryo-EM structure of Nautilus hemocyanin at 9.1 Å resolution (FSC_1/2-bit criterion), and its molecular model obtained by rigid-body fitting of the individual FUs. In this model we identified the subunit dimer, the subunit pathway, and 15 types of inter-FU interface. Four interface types correspond to the association mode of the two protomers in the published Octopus FU-g crystal. Other interfaces explain previously described morphological structures such as the fenestrated wall (which shows D5 symmetry), the three horizontal wall tiers, the major and minor grooves, the anchor structure and the internal collar (which unexpectedly has C5 symmetry). Moreover, the potential calcium/magnesium and N-glycan binding sites have emerged. Many interfaces have amino acid constellations that might transfer allosteric interaction between FUs. From their topologies we propose that the prime allosteric unit is the oblique segment between major and minor groove, consisting of seven FUs from two different subunits. Thus, the 9 Å structure of Nautilus hemocyanin provides fundamentally new insight into the architecture and function of molluscan hemocyanins.     

The structural definition of adducts of stoichiometry MX:dppx (1:1) M = Cu, Ag, X = simple anion, dppx=Ph2P(CH2)xPPh2, x = 3-6

Single crystal X-ray structural characterizations are recorded for a wide range of adducts of the form MX:dppx (1:1)_(n), M = silver(I) (predominantly), copper(I), X = simple (pseudo-) halide or oxy-anion (the latter spanning, where accessible, perchlorate, nitrate, carboxylate - a range of increasing basicity), dppx=bis(diphenylphosphino)alkane, Ph₂P(CH₂)_xPPh₂, x = 3-6. Adducts are defined of two binuclear forms: (i) [LM(μ-X)₂L], with each ligand chelating a single metal atom, and (ii) [M(μ-X)₂(μ-(P-L-P′))₂M′] where both ligands L and halides bridge the two metal atoms; a few adducts are defined as polymers, the ligands connecting M(μ-X)₂M′ kernels, this motif persisting in all forms. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR).     

New oligo-/poly-meric forms for MX:dpex (1:1) complexes (M = Cu, Ag; X = (pseudo-)halide; dpex = Ph2E(CH2)xEPh2, E = (P), As; x = 1, 2)

Single-crystal X-ray structural characterizations of MX:dpam (1:1) (‘dpam’ = Ph₂AsCH₂AsPh₂) are reported for MX = AgCl, Br; CuI, CN/Cl (all isomorphous) and AgI, AgSCN, CuSCN arrays, all being of the novel form [(μ-X){M(μ-X)(As-dpam-As′)₂M′}]_∞, essentially the familiar M(E-dpem-E′)₂M′ binuclear array with both ‘bridging’ and (linking) ‘terminal’ (pseudo-)halides involved in the polymer. A different arrangement of bridging and linking entities is found with AgX:dpae (1:1)_2(∞|∞), X = Br, NCO, ‘dpae’ = Ph₂As(CH₂)₂AsPh₂, now comprising [M(μ-X)₂(As-dpae-As)M] kernels linked by As-dpae-As′, while in the thiocyanate analogue units are linked by the dpae ligands into a two-dimensional web. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR).     

Development of cesium phosphotungstate salt and chitosan composite membrane for direct methanol fuel cells

A novel composite membrane has been developed by doping cesium phosphotungstate salt (Cs_xH_3−xPW₁₂O₄₀ (0 ≤ x ≤3), Cs_x-PTA) into chitosan (CTS/Cs_x-PTA) for application in direct methanol fuel cells (DMFCs). Uniform distribution of Cs_x-PTA nanoparticles has been achieved in the chitosan matrix. The proton conductivity of the composite membrane is significantly affected by the Cs_x-PTA content in the composite membrane as well as the Cs substitution in PTA. The highest proton conductivity for the CTS/Cs_x-PTA membranes was obtained with x = 2 and Cs₂-PTA content of 5 wt%. The value is 6 × 10⁻³ S cm⁻¹ and 1.75 × 10⁻² S cm⁻¹ at 298 K and 353 K, respectively. The methanol permeability of CTS/Cs₂-PTA membrane is about 5.6 × 10⁻⁷, 90% lower than that of Nafion-212 membrane. The highest selectivity factor (φ) was obtained on CTS/Cs₂-PTA-5 wt% composite membrane, 1.1 × 10⁴/S cm⁻³ s. The present study indicates the promising potential of CTS/Cs_x-PTA composite membrane as alternative proton exchange membranes in direct methanol fuel cells.     

The structural definition of adducts of stoichiometry AgX:dppf (1:1)(n), X = simple anion, dppf = bis(diphenylphosphino)ferrocene

Single crystal X-ray structural characterizations are recorded for an array of adducts of the form AgX:dppf (1:1)_(n), X = simple (pseudo-)halide or oxy-anion, ‘dppf’ = bis(diphenyl phosphino)ferrocene, for adducts X = Cl (new phase), Br, I, SCN, OCN, CN, NO₃ (new phase), O₂CCH₃, n = 2, the form being dimeric [(dppf-P,P′)Ag(μ-X)₂Ag(P,P′-dppf)], for X = I, SCN, [Ag(μ-X)₂(P-dppf-P′)₂Ag′]; for X = O₂CCF₃, n = ∞, the form is an extended polymer: ?Ag(O · CO · CF₃)(P-dppf-P′)Ag′(O?. A dichloromethane solvate phase of CuI:dppf (1:1)₂ (also centrosymmetric) is also recorded. Synthetic procedures for all adducts have been reported. All compounds have been characterized both in solution (¹H, ¹³C, ³¹P NMR, ESI MS) and in the solid state (IR). The topology of the structures in the solid state was found to depend on the nature of the counterion.     

Dynamics and Stability in Maturation of a T = 4 Virus

Nudaurelia capensis ω virus is a T = 4, icosahedral virus with a bipartite, positive-sense RNA genome. Expression of the coat protein gene in a baculovirus system was previously shown to result in the formation of procapsids when purified at pH 7.6. Procapsids are round, porous particles (480 Å diameter) and have T = 4 quasi-symmetry. Reduction of pH from 7.6 to 5.0 resulted in virus-like particles (VLP_5.0) that are morphologically identical with authentic virions, with an icosahedral-shaped capsid and a maximum dimension of 410 Å. VLP_5.0 undergoes a maturation cleavage between residues N570 and F571, creating the covalently independent γ peptide (residues 571-641) that remains associated with the particle. This cleavage also occurs in authentic virions, and in each case, it renders the morphological change irreversible (i.e., capsids do not expand when the pH is raised back to 7.6). However, a non-cleavable mutant, N570T, undergoes the transition reversibly (NT_7.6 ↔ NT_5.0). We used electron cryo-microscopy and three-dimensional image reconstruction to study the icosahedral structures of NT_7.6, NT_5.0, and VLP_5.0 at about 8, 6, and 6 Å resolution, respectively. We employed the 2. 8-Å X-ray model of the mature virus, determined at pH 7.0 (XR_7.0), to establish (1) how and why procapsid and capsid structures differ, (2) why lowering pH drives the transition, and (3) why the non-cleaving NT_5.0 is reversible. We show that procapsid assembly minimizes the differences in quaternary interactions in the particle. The two classes of 2-fold contacts in the T = 4 surface lattice are virtually identical, both mediated by similarly positioned but dynamic γ peptides. Furthermore, quasi and icosahedral 3-fold interactions are indistinguishable. Maturation results from neutralizing the repulsive negative charge at subunit interfaces with significant differentiation of quaternary interactions (one 2-fold becomes flat, mediated by a γ peptide, while the other is bent with the γ peptide disordered) and dramatic stabilization of the particle. The γ peptide at the flat contact remains dynamic when cleavage cannot occur (NT_5.0) but becomes totally immobilized by noncovalent interactions after cleavage (VLP_5.0).     

The structural definition of adducts of stoichiometry MX:dpex (2:3)(∞), M = Cu, Ag, X = simple anion, dpex = Ph2E(CH2)xEPh2, E = P, As

Single crystal X-ray structural characterizations are recorded for a number of adducts of MX:dpex (2:3) stoichiometry (MX = simple univalent copper or silver salt; dpex = Ph₂E(CH₂)_xEPh₂ (E = P, As)). CuX:dppe (2:3) (X = Cl, Br, I, CN) are binuclear [(dppe-P,P′)CuX(P-dppe-P′)CuX(P,P′-dppe)], all centrosymmetric. AgX:dpex (2:3) (dpex = ‘dpae’ (Ph₂As(CH₂)₂AsPh₂), X = Br, F₃CCO₂ (= ‘tfa’), F₃CSO₃ (≡ ‘tfs’); dpex = ‘dpape’ (Ph₂As(CH₂)₂PPh₂), X = CN, SCN, OClO₃) are one-dimensional polymers ?-E′)₁AgX(E-dpex-E′)₂-AgX(E-dpex-E′)₁AgX?, P, As sites scrambled in the latter. AgNO₃:dpam (2:3) is also a one-dimensional polymer, ?AgO·NO·OAg(As-dpam-As)AgO·NO·OAg? (‘dpam’ ≡ Ph₂As(CH₂)₂AsPh₂). AgX:dpae (2:3) (X = I, CN, ClO₄, NO₃) and AgX:dpape (2:3) (X = Br, I, NO₃) are two-dimensional polymers with large 30-membered macrocyclic rings; similar webs are found for dppx ligands in AgOH:dppb (2:3) and AgNCO, Agtfa:dpph (2:3) with 42- and 54-membered rings. Complexes AgX:dpape (1:3) (X = Cl, Br) are defined as mono-nuclear [XAg(Ph₂P(CH₂)₂AsPh₂)₃] arrays, the unidentate ligands predominantly P-bound. Synthetic procedures for the adducts are reported, selected compounds being characterized both in solution (¹H, ³¹P NMR, ESI MS) and in the solid state (IR).     

The human xenobiotic-metabolizing enzyme arylamine N-acetyltransferase 1 (NAT1) is irreversibly inhibited by inorganic (Hg) and organic mercury (CH3Hg): Mechanism and kinetics

Human arylamine N-acetyltransferase 1 (NAT1) is a xenobiotic-metabolizing enzyme that biotransforms aromatic amine chemicals. We show here that biologically-relevant concentrations of inorganic (Hg²⁺) and organic (CH₃Hg⁺) mercury inhibit the biotransformation functions of NAT1. Both compounds react irreversibly with the active-site cysteine of NAT1 (half-maximal inhibitory concentration (IC₅₀) = 250 nM and k_inact = 1.4 × 10⁴ M⁻¹ s⁻¹ for Hg²⁺ and IC₅₀ = 1.4 μM and k_inact = 2 × 10² M⁻¹ s⁻¹ for CH₃Hg⁺). Exposure of lung epithelial cells led to the inhibition of cellular NAT1 (IC₅₀ = 3 and 20 μM for Hg²⁺ and CH₃Hg⁺, respectively). Our data suggest that exposure to mercury may affect the biotransformation of aromatic amines by NAT1.     

Synthesis and characterization of [Ru(NO)(bpp)Cl · 2H2O] [bpp = N,N′-bis(2-pyridinecarboxamide)-1,3-propane dianion] and [Ru(NO)(bpe)Cl · 2H2O] [bpe = N,N′-bis(2-pyridinecarboxamide)-1,2-ethane dianion]

Two ruthenium nitrosyl bis-pyridyl/biscarboxamido compounds, [Ru(NO)(bpp)Cl · 2H₂O] [bpp = N,N′-bis(2-pyridinecarboxamide)-1,3-propane dianion] and [Ru(NO)(bpe)Cl · 2H₂O] [bpe = N,N′-(bis-2-pyridinecarboxamide)-1,2-ethane dianion] have been characterized by ¹H NMR, ¹³C{¹H} NMR, and IR spectroscopies, electrospray ionizaton mass spectrometry, and X-ray crystallography.     

Crystal structure and fluorescence of a europium (III) complex: EuCl3(2,2′-bipyridine N,N dioxide) · 2CH3OH

We report the synthesis and characterization of a seven coordinate europium complex, [EuCl₃(C₁₀H₈N₂O₂) ·  2CH₃OH]. The growing interest in developing efficient light conversion molecular devices (LCMDs) necessitates the need for new fluorescent materials. Ideal physicochemical properties of the materials include ligand absorption, efficient metal to ligand transfer, and strong luminescence with a relatively long decay time. The design of such material requires distinct absorbing (ligand) and emitting (metal ion) components. While Eu³⁺ cation has a non-degenerate emitting level, 2,2′-bipyridine N,N dioxide is a heterocyclic ligand known to exhibit strong luminescence. Additional characterization is also described, including single crystal X-ray diffraction, IR and UV-Vis spectroscopies and elemental analysis.     

Hydrothermal synthesis and structural investigation of silver magnesium complex of benzenehexacarboxylic acid (mellitic acid), Ag2Mg2[C6(COO)6] · 8H2O with two-dimensional layered structure

Crystal and molecular structure of silver magnesium mellitate, Ag₂Mg₂[C₆(COO)₆] · 8H₂O, was synthesized hydrothermally and characterized by X-ray structure analysis. The complex crystallizes in the monoclinic system, space group P2/n, with unit cell dimensions of a=7.4347(2), b=9.9858(2), c=14.4248(3) Å, β=99.2429(5)°, V=1055.01(4) ų, and Z=2. The structure was solved and refined to R=0.036 (R_w=0.045) for 1707 independent reflections [I_o>2σ(I_o)]. The Ag cations are coordinated by six carboxylic oxygen atoms of mellitate anions with composition of [C₆(COO)₆]⁶⁻ on the (1 0 1) plane; each mellitate anion linking three neighboring Ag distorted trigonal prisms produces a two-dimensional layered structure parallel to (1 0 1). The Mg cations, which are coordinated by four water molecules and two carboxylic oxygen atoms, are intercalated between the two-dimensional layer stacks. The carboxylate group coordinated to Mg and Ag cations serve as a tridentate ligand in that structure. The number of water molecules incorporated into the mellitate compound is controlled mainly by ionic radii of metal cation in the structure. Furthermore, the ionic radii of metal cations in the mellitate compound play an essential role in arrangement of mellitate anions in the structure, whether as a one-dimensional infinite chain, a two-dimensional layered structure, or a three-dimensional framework structure.     

The impact of GGH -401C > T polymorphism on cisplatin-based chemoradiotherapy response and survival in cervical cancer

Aims

Cervical cancer is the third most frequent cancer in women worldwide, mostly treated with cisplatin-based chemoradiotherapy. Since it is known that folate metabolism might interfere with cisplatin effectiveness, we intended to study the influence of the Gamma Glutamyl Hydrolase -401C > T polymorphism in treatment response in cervical cancer.

Methods

We retrospectively reviewed the clinical data of 167 patients with bulky cervical cancer submitted to cisplatin-based chemoradiotherapy. The genotypes of GGH -401C > T SNP were determined by real-time PCR and statistical analysis was performed by χ² test and survival analysis.

Results

The genotypes of GGH-401C > T were significantly associated with the response to platinum-based chemoradiotherapy. Treatment response was higher in patients carrying the CC genotype, who presented a significant increased chance of treatment response (survival time in months/genotype: 91 for CC Vs 72 for CT/TT; p = 0.035, log rank test). A Cox regression analysis accordingly showed that the presence of the T allele was significantly linked to a worse treatment response (HR = 3.036; CI 95% 1.032-8.934, p = 0.044).

Conclusions

The results of our study suggested the potential interest of GGH -401C > T as a predictive factor of the outcome of cervical carcinoma treated with cisplatin-based chemoradiotherapy.