RNA-mediated specificity of DNA packaging into hybrid lambda/phi 29 proheads.

A small RNA (pRNA, 174 nt) is known to be essential for DNA packaging in bacteriophage phi 29. However, in an in vitro DNA packaging system based on hybrid lambda/phi 29 proheads (made up of head proteins from phage lambda and connectors from phage phi 29), the specificity of DNA packaging is lost, and different RNA molecules fulfil the requirements for DNA packaging, albeit with less efficiency than phi 29 pRNA. Competition assays with RNAs from different sources have shown that phi 29 connectors bind preferentially pRNA. An increase in the efficiency of phi 29 DNA packaging into hybrid proheads induced by phi 29 pRNA is observed because, when phi 29 pRNA is incubated with hybrid proheads, phi 29 DNA is packaged more efficiently than other DNAs of similar length. Furthermore, when hybrid proheads carrying phi 29 pRNA are incubated with a mixture of DNAs from different sources, phi 29 DNA is selectively packaged, thus indicating that phi 29 pRNA determines the specificity of DNA packaging.     

An improved technique for the efficient construction of gene libraries by partial filling-in of cohesive ends

For the preparation of gene libraries, DNA from lambda EMBL3 phage was digested with SalI and EcoRI, and the cohesive ends partially filled-in by addition of dTTP, dCTP and Klenow fragment of DNA polymerase I (PolIk). Genomic DNA was cleaved partially with Sau3A and subsequently incubated with dATP, dGTP and PolIk. The phage and genomic DNAs were then mixed and ligated. The recombinant DNAs were packaged in vitro. The efficiency of packaging was 10(5)-10(6) of infectious phage lambda particles per microgram of the genomic DNA (as compared to approx. 10(7) per microgram for the wild-type lambda DNA). This procedure is very rapid and requires only microgram quantities of genomic DNA for preparing an entire gene library. The other important advantage is that multiple independent insertions of genomic DNA cannot occur in a single recombinant phage and self-ligation of phage DNA is blocked. It is also applicable for other SalI-containing vectors.     

A phage T4 in vitro packaging system for cloning long DNA molecules.

Recombinant plasmid DNAs containing long DNA inserts that can be propagated in Escherichia coli would be useful in the analysis of complex genomes. We tested a bacteriophage T4 in vitro DNA packaging system that has the capacity to package about 170 kb of DNA into its capsid for cloning long DNA fragments. We first asked whether the T4 in vitro system can package foreign DNA such as concatemerized lambda imm434 DNA and phage P1-pBR322 hybrid DNA. The data suggest that the T4 system can package foreign DNA as efficiently as the mature phage T4 DNA. We then tested the system for its ability to clone foreign DNA fragments using the P1-pBR322 hybrid vectors constructed by Sternberg [Proc. Natl. Acad. Sci. USA 87 (1990) 103-107]. E. coli genomic DNA fragments were ligated with the P1 vectors containing two directly oriented loxP sites, and the ligated DNA was packaged by the T4 in vitro system. The packaged DNA was then transduced into E. coli expressing the phage P1 cyclization recombination protein recombinase to circularize the DNA by recombination between the loxP sites situated at the ends of the transduced DNA molecule. Clones with long DNA inserts were obtained by using this approach, and these were maintained as single-copy plasmids under the control of the P1 plasmid replicon. Clones with up to about 122-kb size inserts were recovered using this approach.     

Molecular structures of packageable ColE1 hybrids and the generation of deletion mutants from one of the hybrids

ColE1 derivatives carrying cohesive end sites of lambda phage genome (= cos lambda) can be packaged within lambda phage particles. The DNA structure of the prototype ColE1-cos lambda derivative named pKY2257 was studied because of its potential usefulness in various fields in molecular biology. pKY2257, which carries an intact galactose operon of E. coli, is a convenient replicon to detect Tn3 translocation. It was found that one of the PK2257::Tn3 derivatives, pKY2113, generated various small plasmids in E. coli. The molecular structures of some of these deletion mutants were compared with each other and with those of parental plasmid DNAs by heteroduplex analysis and restriction enzyme digestion. A possible mechanism, which seems to be unique to this kind of deletions, is discussed on the basis of the present results.     

Construction of a hybrid bacteriophage-plasmid recombinant DNA vector.

A phage-plasmid hybrid was constructed for use as a recombinant DNA vector, allowing the propagation of cloned EcoRI restriction endonuclease fragments of about 2 X 10(6) to 11 X 10(6) daltons. The colicin E1 plasmid replicon was fused to the left arm of a lambdagt generalized transducing phage with a thermolabile repressor, yielding a genome which could be replicated either by phage lambda functions or via the colicin E1 plasmid replicon. At the nonpermissive temperature, phage functions were derepressed and phage growth occurred lytically. Alternatively, at the permissive temperature, lambda functions were repressed and the vector replicated as a covalently closed circular plasmid. The phage-plasmid hybrid vector could be maintained at a copy number determined by the colicin E1 plasmid replicon and was also sensitive to amplification after chloramphenicol treatment. An EcoRI fragment of Escherichia coli DNA encoding genes of the arabinose operon also was inserted into the central portion of the vector.     

Replication of colicin E1 plasmid DNA in vivo requires no plasmid-encoded proteins.

A derivative of bacteriophage lambda containing a colicin E1 plasmid replicon was constructed by recombinant DNA techniques. This phage, lambdacol100, has two functional modes of DNA replication; it can replicate via either plasmid or phage replication systems. lambdacol100 has been used to introduce the colicin E1 plasmid replicon into Escherichia coli previously treated with chloramphenicol to block protein synthesis. Under these conditions, lambdacol100 DNA is replicated normally as a colicin E1 plasmid. This suggests that colicin E1 plasmid replication in vivo does not require any plasmid-encoded proteins.     

A functional domain of bacteriophage lambda terminase for prohead binding

Terminase is a multifunctional protein complex involved in DNA packaging during bacteriophage lambda assembly. Terminase is made of gpNul and gpA, the products of the phage lambda Nu1 and A genes. Early during DNA packaging terminase binds to lambda DNA to form a complex called complex I. Terminase is required for the binding of proheads by complex I to form a DNA: terminase: prohead complex known as complex II. Terminase remains associated with the DNA during encapsidation. The other known role for terminase in packaging is the production of staggered nicks in the DNA thereby generating the cohesive ends. Lambdoid phage 21 has cohesive ends identical to those of lambda. The head genes of lambda and 21 show partial sequence homology and are analogous in structure, function and position. The terminases of lambda and 21 are not interchangeable. At least two actions of terminase are involved in this specificity: (1) DNA binding; (2) prohead binding. The 1 and 2 genes at the left end of the 21 chromosome were identified as coding for the 21 terminase. gp1 and gp2 are analogous to gpNu1 and gpA, respectively. We have isolated a phage, lambda-21 hybrid 33, which is the product of a crossover between lambda and 21 within the terminase genes. Lambda-21 hybrid 33 DNA and terminase have phage 21 packaging specificity, as determined by complementation and helper packaging studies. The terminase of lambda-21 hybrid 33 requires lambda proheads for packaging. We have determined the position at which the crossover between lambda DNA and 21 DNA occurred to produce the hybrid phage. Lambda-21 hybrid 33 carries the phage 21 1 gene and a hybrid phage 2/A gene. Sequencing of lambda-21 hybrid 33 DNA shows that it encodes a protein that is homologous at the carboxy terminus with the 38 amino acids of the carboxy terminus of lambda gpA; the remainder of the protein is homologous to gp2. The results of these studies define a specificity domain for prohead binding at the carboxy terminus of gpA.     

Single-Molecule and FRET Fluorescence Correlation Spectroscopy Analyses of Phage DNA Packaging: Colocalization of Packaged Phage T4 DNA Ends within the Capsid

Linear DNAs of any sequence can be packaged into empty viral procapsids by the phage T4 terminase with high efficiency in vitro. Packaging substrates of 5 kbp and 50 kbp, terminated by energy transfer dye pairs, were constructed from plasmid and λ phage DNAs. Nuclease and fluorescence correlation spectroscopy (FCS) assays showed that ∼ 20% of the substrate DNA was packaged and that the DNA dye ends of the packaged DNA were protected from nuclease digestion. Upon packaging, both 5-kbp and  50-kbp DNAs produced comparable fluorescence resonance energy transfer (FRET) between Cy5 and Cy5.5 double-dye terminated DNAs. Single-molecule FRET (sm-FRET) and photobleaching analysis shows that FRET is intramolecular rather than intermolecular upon packaging of most procapsids and demonstrates that single-molecule detection allows mechanistic analysis of packaging in vitro. FRET-FCS and sm-FRET measurements are comparable and show that both the 5-kbp and the  50-kbp packaged DNA ends are held within 8-9 nm of each other, within the dimensions of the long axis of the procapsid portal. The calculated distribution of FRET distances is relatively narrow for both FRET-FCS and sm-FRET, suggesting that the two packaged DNA ends are held at the same fixed distance relative to each other in most capsids. Because one DNA end is known to be positioned for ejection through the portal, it can be inferred that both DNAs ends are held in proximity to the portal entrance and ejection channel. The analysis suggests that a DNA loop, rather than a DNA end, is translocated by the packaging motor to fill the procapsid.     

In vitro packaging into phage T4 particles and specific recircularization of phage lambda DNAs

Concatemeric phage lambda imm434 DNA packaged in vitro into phage T4 particles produced plaques on a selective host. Moreover, lambda DNA containing a pBR322 derivative flanked by the lambda attL and attR sites could be specifically recircularized by excisive lambda recombination to yield the pBR322 derivative. A host deficient in generalized recombination and containing a defective lambda c Its prophage which provided Int and Xis proteins was the recipient for this plasmid derivative carried by T4. Such a T4-lambda hybrid may potentially allow almost one T4 headful of donor DNA (166 kb) to be packaged and recircularized.     

Lambda bacteriophage-mediated transduction of ColE1 deoxyribonucleic acid having a lambda bacteriophage-cohesive end site: selection of packageable-length deoxyribonucleic acid.

An in vitro recombinant ColE1-cos lambda deoxyribonucleic acid (DNA) molecule, pKY96, has 70% of the length of lambda phage DNA. The process of lambda phage-mediated transduction of pKY96 generated a small amount of transducing phage particles containing ColE1-cos lambda DNA molecules of 80 or 101% of the length of lambda phage DNA, in addition to those containing original pKY96 DNA molecules. The newly isolated larger plasmid DNAs were transduced 100 times more efficiently than pKY96 DNA. Their structures were compared with that of a prototype pKY96 DNA, and the mechanism of the formation of these molecules is discussed.     

Sensitivity of Intracellular Bacteriophage λ to Colicin CA42-E2

Treatment of Escherichia coli K-12 infected by lambda CIts857 with colicin CA42-E2 resulted in partial inhibition of the infectious process. Uninfected bacteria were killed by colicin with a probability of about five times that with which similarly treated lambda-infected bacteria lose plaque-forming ability. The lambda deoxyribonucleic acid (DNA), when present in a bacterial cell either as the replicating DNA of infectious phage or as the nonreplicating DNA of superinfecting phage, was degraded to acid-soluble material after colicin treatment. Analysis of the intermediates of DNA breakdown has revealed that degradation of the DNA to acid-soluble material is preceded by endonucleolytic fragmentation of the chromosome at a limited number of sites. This is the same mechanism of degradation previously observed for E. coli DNA after colicin treatment.     

Optimal lengths for DNAs encapsidated by Epstein-Barr virus.

We measured the efficiency of DNA packaging by Epstein-Barr virus (EBV) as a function of the length of the DNA being packaged. Plasmids that contain oriP (the origin of latent EBV DNA replication), oriLyt (the origin of lytic EBV DNA replication), the viral terminal repeats (necessary for cleavage and packaging by EBV), and various lengths of bacteriophage lambda DNA were introduced into EBV-positive cells. Upon induction of the resident EBV's lytic phase, introduced plasmids replicated as concatemers and were packaged. Plasmid-derived concatemers of DNA with certain lengths were found to predominate in isolated virion particles. We measured the distribution of lengths of plasmid concatemers found within cells supporting the lytic phase of the viral life cycle and found that this distribution differed from the distribution of lengths of concatemers found in mature virion particles. This finding indicates that the DNA packaged into mature virions represents a selected subset of those present in the cell during packaging. These observations together indicate that the length of DNA affects the efficiency with which that DNA is packaged by EBV. Finally, we measured the length of the packaged B95-8 viral DNA and found it to be approximately 165 kbp, or 10 kbp shorter than the originally predicted size for B95-8 based on its sequence. Together with the results of other studies, these findings indicate that the packaging of DNAs by EBV is dependent on two imprecisely recognized elements: the viral terminal repeats and the length of the DNA being packaged by the virus.     

Transduction of bacteriophage lambda by bacteriophage T1.

When bacteriophage T1 was grown on bacteriophage lambda-lysogenic cells, phenotypically mixed particles were formed which had the serum sensitivity, host range, and density of T1 but which gave rise to lambda phage. T1 packaged lambda genomes more efficiently both when the length of the prophage was less than that of wild-type lambda and when the host cell was polylysogenic. Expression of the red genes of lambda or the recE system of Escherichia coli during T1 growth enhanced pickup of lambda by T1, whereas packaging was reduced in recB cells. If donors were singly lysogenic, the expression of transduced lambda genomes as a PFU required lambda-specified excisive recombination, whereas lambda genomes transduced from polylysogens required only lambda- or E. coli-specified general recombination to give a productive infection.     

Identification of sequences necessary for packaging DNA into lambda phage heads

Several species of DNA molecules are packaged into lambda phage heads if they carry the region around the cohesive end site of lambda phage (cos lambda). The minimal functional sequence around cos lambda needed for packaging was examined by cloning in pBR322. The results showed that the minimal region contained 85 bp around cos lambda; 45 bp of the left arm of lambda phage and 40 bp of the right arm. A 75-bp region located to the right of the minimal region seems to enhance packaging. A 223-bp fragment containing these regions can be used as a portable element for plasmid DNA packaging into lambda phage heads. Plasmid ppBest 322, a derivative of pBR322 carrying this portable packager and both amp and tet genes, was constructed. This plasmid is useful for cloning of large DNA fragments.     

Direct transfer of coliphage lambda DNA from Escherichia coli to cellular slime mold Dictyostelium discoideum

Dictyostelium discoideum myxamoebae were cultured with Escherichia coli cells infected with lambda phage in the presence of chloramphenicol. After eliminating the uningested bacteria by repeated centrifugation in a Percoll gradient, we examined the myxamoeba cytoplasm (not the food vacuole) for the presence of phage DNA. A significant amount of DNA extracted from the myxamoebae was hybridizable with purified phage lambda DNA, and capable of forming phage particles when packaged in vitro with phage lambda proteins. The EcoRI restriction maps of the phages recovered from the plaques were identical to that of the infecting phage. These results strongly suggest that phage DNA molecules were taken up by the cellular slime mold cells and that at least some fraction existed in intact form.     

Synthesis of defective viral DNA in HeLa cells infected with adenovirus type 3.

Virus-specific DNA fragments that are shorter than the full-length viral genomes have been isolated from HeLa cells productively infected with adenovirus type 3. A number of predominant size classes could be detected by gel electrophoresis and hybridization, and the array of sizes was similar or identical to the selection in DNA purified from incomplete particles of this serotype (E. Daniell, J. Virol. 19:685-708, 1976). A large fraction of these short DNA molecules contained long inverted terminal repetitions, as did DNA molecules from incomplete particles. Restriction analysis showed that these subgenomic molecules consist of sequences from the two molecular ends of the normal genome. These results suggest that the predominance of left-hand end fragments seen in packaged incomplete DNAs results from selective packaging, whereas the predominance of certain size classes of intracellular viral DNA is a function of prepackaging events. The incomplete DNAs were generated at all times during viral DNA replication, and the yield relative to complete DNA did not seem to vary significantly with time or multiplicity of infection or when the virus was propagated on different human cell types.     

In Vitro Packaging of UV Radiation-Damaged DNA from Bacteriophage T7

When DNA from bacteriophage T7 is irradiated with UV light, the efficiency with which this DNA can be packaged in vitro to form viable phage particles is reduced. A comparison between irradiated DNA packaged in vitro and irradiated intact phage particles shows almost identical survival as a function of UV dose when Escherichia coli wild type or polA or uvrA mutants are used as the host. Although uvrA mutants perform less host cell reactivation, the polA strains are identical with wild type in their ability to support the growth of irradiated T7 phage or irradiated T7 DNA packaged in vitro into complete phage. An examination of in vitro repair performed by extracts of T7-infected E.coli suggests that T7 DNA polymerase may substitute for E. coli DNA polymerase I in the resynthesis step of excision repair. Also tested was the ability of a similar in vitro repair system that used extracts from uninfected cells to restore biological activity of irradiated DNA. When T7 DNA damaged by UV irradiation was treated with an endonuclease from Micrococcus luteus that is specific for pyrimidine dimers and then was incubated with an extract of uninfected E. coli capable of removing pyrimidine dimers and restoring the DNA of its original (whole genome size) molecular weight, this DNA showed a higher packaging efficiency than untreated DNA, thus demonstrating that the in vitro repair system partially restored the biological activity of UV-damaged DNA.     

In vitro packaging of a lambda Dam vector containing EcoRI DNA fragments of Escherichia coli and phage P1.

In this report we describe a coliphage lambda vector system for cloning endo R. EcoRI DNA fragments. This system differs significantly from those previously described in two ways. First, restricted and ligated DNA is encapsidated in vitro. Second, with increasing lambda DNA size in the range 78 to 100% that of wild-type, the efficiency of DNA encapsidation into infectious phage particles markedly increases. For lambda wild-type DNA the efficiency of in vitro packaging (10(6) to 10(7) plaques produced per microgram of added DNA) is equal to, or better than, the standard CaCl2 transfection method. The use of a Dam mutation to facilitate recognition of size classes of inserted fragments is described. Using this vector and in vitro packaging, several E. coli and phage P1 and R.EcoRI fragments were cloned.