Effect of relative humidity,temperature and fungicide on germination of conidia of Cercospora canescens caused the Cercospora leaf spot disease in mungbean

The aim of the present investigation was to determine the impact of relative humidity (RH) and temperature on conidial germination, nuclear position and effect of important fungicides on growth and conidial germination of Cercospora canescens. Germination of conidia was observed at RH range 92–100% at 5–35°C. Significant interaction between temperature and RH indicated that higher humidity and high temperature promoted quick germination both in the presence and absence of free moisture. Although in absence of free moisture at 92–95% RH higher temperatures 25–35°C promoted quick evaporation of moisture and no conidial germination. Number of germtube was increased significantly at the optimum temperature 25–30°C and higher humidity (98–100%). But higher temperature 25–35°C with lower RH did not support the conidial germination. This finding is very important for disease forecasting using meteorological data. The spray of Carbendazim as contact fungicide may not be useful since it is not effective against the conidia of C. canescens. Triadimefon did not inhibit the conidia germination but completely inhibited mycelium development at 50 μg/ml. Propriconazole inhibited both conidia germination and mycelial development. Therefore, Propiconazole may be taken as protective as well as curative spray. In non-systemic fungicide, Copper oxychloride gave anticipated result by inhibiting both conidial germination and mycelium development. Therefore, copper oxychloride can be used as protectant fungicides for Cercospora leaf spot caused by C. canescens.     

Factors affecting sporulation and germination of Pandora nouryi (Entomophthorales: Entomophthoraecae), a pathogen of Myzus persicae (Homoptera: Aphididae)

Pandora nouryi discharged large numbers of primary conidia between 8 and 25°C from cadavers on the surface of water-agar. At 8°C conidial discharge lasted for 120 h, but most conidia were produced within 48 h when temperature was >15°C. Saturated humidity alone was not enough to allow for sporulation to occur freely and where RH?<?95%, no conidia were discharged. Light did not affect the pattern of conidial production nor the total number of conidia. Germination percentages of conidia on the surface of water-agar were 40 and 66% at 8 and 30°C, respectively, and were significantly lower than that at 15–25°C where germination was >95%. Conidia on leaves germinated well when RH?>?74%, while no germination occurred when RH?<?100% on cover slips. All eight insecticides tested entirely inhibited conidial germination at recommended doses (R), in particular, both the organophosphorus pesticides Lorsben (chlorpyrifos) and the organochlorine pesticides Thiodan (endosulfan) completely inhibited conidial germination even at 0.2R dose.     

Persistence of <Emphasis Type="Italic">Isaria fumosorosea</Emphasis> (Hypocreales: Cordycipitaceae) SFP-198 Conidia in Corn Oil-Based Suspension

Long-term persistence of entomopathogenic fungi as biopesticides is a major requirement for successful industrialization. Corn oil carrier was superior in maintaining germination rates of Isaria fumosorosea SFP-198 conidia during exposure to 50°C for 2 h, when compared with other oils, such as soybean oil, cottonseed oil, paraffin oil, and methyl oleate. The corn oil-based conidial suspension (91.6% germination) was also better in this regard than conidial powder (28.4% germination) after 50°C for 8 h. Long-term storage stabilities of corn oil-based conidial suspension and conidial powder at 4 and 25°C for 24 months were investigated, based on the correlation of germination rate with insecticidal activity against greenhouse whiteflies, Trialeurodes vaporariorum. Viability of conidia in corn oil was more than 98.4% for up to 9 months of storage at 25°C, and followed by 23% at 21 months. However, conidial powder had only 34% viability after 3 months of storage at 25°C, after which its viability rapidly decreased. The two conidial preparations stored at 4°C had better viabilities than those at 25°C, showing the same pattern as above. These results indicate that corn oil-based conidial suspension can be used to improve conidial persistence in long-term storage and be further applied to the formulation of other thermo-susceptible biological control agents.     

In vitro compatibility of Beauveria bassiana strain ATCC 74040 with copper fungicides

Copper fungicides and mycoinsecticides based on entomopathogenic fungi Beauveria spp. are the most common pesticides used in organic crop production systems. The in vitro effects of the copper fungicides copper oxide, copper hydroxide, copper oxychloride, copper sulphate, dicopper chloride trihydroxide and tribasic copper sulphate were investigated for mycelial growth, sporulation and conidial germination of the ATCC 74040 commercial strain of Beauveria bassiana. Mycelial growth was evaluated on potato dextrose agar plates with 100%, 75%, 50%, 25%, 12.5%, 6.25% and 0% of the recommended application rates of each fungicide at 15 and 25°C. Sporulation and conidial germination were determined at the recommended field doses of each fungicide at 25°C. All copper fungicides had fungistatic or fungicidal effects on B. bassiana that varied according to the dose. Only in two cases, copper oxide at 15°C and copper hydroxide at 25°C, at the lowest concentration of 6.5%, was mycelial growth not statistically significantly inhibited. Inhibition of mycelial growth depended both on the fungicide and its concentration, and partly on temperature. Both sporulation and conidial germination of B. bassiana were significantly inhibited by all fungicides. All fungicides inhibited the sporulation in a similar way (99.8%–100%). With the exception of copper oxychloride (inhibition, 13.6%), the other fungicides showed high detrimental effects on conidial germination (inhibition, 91.7%–100%). The fungus was strongly affected by some fungicides even at the lowest doses. The biological index used for the B. bassiana with copper fungicides ranged from 0.6 (copper sulphate) to 18.1 (copper oxychloride). Therefore, the tested fungicides were classified into the upper half of the highly toxic (T) category and are considered incompatible with the entomopathogenic fungus B. bassiana strain ATCC 74040 under in vivo experimental conditions. These results need to be further verified in vitro under both greenhouse and open-field conditions.     

Phylogeny,morphology and pathogenicity of Elsinoë ampelina,the causal agent of grapevine anthracnose in Brazil and Australia

Anthracnose caused by Elsinoë ampelina is one of the most important table grape diseases in humid regions in Brazil and Australia. The objective of this study was to characterize E. ampelina isolates from Brazil and Australia by means of phylogenetic analyses, morphological features and pathogenicity tests. Phylogenetic relationships among 35 isolates were determined based on a data set of internal transcribed spacer (ITS), histone H3 (HIS3) and elongation factor 1‐α (TEF) sequences. In phylogenetic tree analyses, using a combined ITS and TEF sequence alignment, all E. ampelina isolates were clustered together in a single well‐supported clade. In contrast to the absence of genetic variability within ITS and TEF sequences, HIS3 sequences showed 54 polymorphic sites. The haplotype network generated from HIS3 data set showed four distinct haplotypes. EA1 was the predominant haplotype including 29 isolates from both countries. High genetic variability was observed in two Brazilian isolates, haplotype EA4, which may have lost the intron region during species evolution. Colony colours differed between Brazilian and Australian isolates, but showed similar wrinkled colony texture, absence of spores, sparse‐to‐absent white aerial mycelium and slow growth (0.049–0.060 mm/day). Brazilian isolates produced conidia of 5.65 × 2.65 μm, larger than conidia from Australian isolates, which measured 5.14 × 2.30 μm. In pathogenicity tests, all nine Australian isolates inoculated were pathogenic on detached canes and potted vines of table grape.     

Conidial water affinity is an important characteristic for thermotolerance in entomopathogenic fungi

The interspecific thermotolerance of several species of entomopathogenic fungi was evaluated based on the conidial water affinity. The species were divided between hydrophilic and hydrophobic conidia. The species with hydrophobic conidia were Beauveria bassiana (ARSEF 252), Metarhizium brunneum (ARSEF 1187), Metarhizium robertsii (ARSEF 2575), Isaria fumosorosea (ARSEF 3889) and Metarhizium anisopliae s.l. (ARSEF 5749). The species with hydrophilic conidia were Tolypocladium cylindrosporum (ARSEF 3392), Tolypocladium inflatum (ARSEF 4877), Simplicillium lanosoniveum (ARSEF 6430), Lecanicillium aphanocladii (ARSEF 6433), S. lanosoniveum (ARSEF 6651), Aschersonia placenta (ARSEF 7637) and Aschersonia aleyrodis (ARSEF 10276). The conidial surface tension of each isolate was also studied. Conidial suspensions were exposed to 38, 41 or 45 °C. After exposure, the suspensions were inoculated on media and conidial germination was evaluated. Considerable differences in thermotolerance were found among the 12 entomopathogenic fungal species. Species with hydrophobic conidia were generally more thermotolerant than species with hydrophilic conidia. All isolates with hydrophobic conidia showed higher conidial surface tension than the isolates with hydrophilic conidia.     

Chitosan and hot water treatments reduce postharvest green mould in ‘Murcott’ tangor

This study aims to evaluate the efficacy of hot water and chitosan treatments to control green mould caused by Penicillium digitatum in 'Murcott' tangor. P. digitatum conidial germination and mycelial growth were evaluated in assays in vitro to verify whether chitosan (0.5, 1 and 2%) or hot water (45, 50, and 55°C, for 30 s, 1, 2, and 5 min) acts directly on fungus development. In vivo assays consisted of inoculating the fruit with P. digitatum (10⁵ conidia ml⁻¹) 4 hr before the chitosan and hot water treatments. Subsequently, green mould incidence and severity were evaluated in fruits stored at 25°C/80% RH for 4 days. Also, treatments combining chitosan and hot water were investigated for controlling green mould and the effect on postharvest quality of fruit stored at 5°C/90% RH. The results showed that P. digitatum conidia germination and mycelial growth were significantly reduced by the hot water treatments especially at 50°C/5 min and 55°C/2 or 5 min in the first case and 50 and 55°C/5 min in the second. These two treatments, when applied alone, 1 min dipping in 2% chitosan or hot water at 50°C/5 min, significantly reduced green mould development in fruit kept at 25°C/80% RH or refrigerated. However, the hot water dip combined with chitosan did not improve green mould control on ‘Murcott’ tangor at room temperature or under refrigeration. Besides, chitosan and hot water did not impair fruit quality. Thus, chitosan and hot water could be an alternative to synthetic fungicides to control green mould in citrus while also contributing to a decrease in the postharvest losses of ‘Murcott’ tangor.     

Impact of culture age on conidial germination,desiccation and UV tolerance of entomopathogenic fungi

The impact of culture age on conidial yields, germination and tolerance to UV exposure of freshly harvested and dry conidia produced by five entomopathogenic fungal (EPF) isolates was studied. Beauveria bassiana, Metarhizium anisopliae, Lecanicillium lecanii and Lecanicillium muscarium were grown on potato dextrose agar (PDA) medium for 7 or 14 days at 25°C. While the age of cultures had a significant impact on the germination rate of conidia produced by isolates L. lecanii CBS 122.175 and B. bassiana LMSA 1.01.093, other EPF isolates germinated at the same rate regardless of the culture age. When exposed to UV radiation, conidia produced by all isolates germinated at a lower rate compared to the non-irradiated conidia, although this decrease in germination (20–80% decrease) was unaffected by the culture age. Air-drying had only a slight impact on conidial germination (0–60% decrease). Under the conditions of this study, the stability of irradiated conidia produced by M. anisopliae LMSA 1.01.197 and B. bassiana CBS 110.25 was significantly increased when conidia were dried prior to UV exposure. This increase in tolerance to stress of dried conidia might be caused, at least partially, by the low metabolic activity associated with dehydration.     

Molecular identification and characterization of Elsinoë murrayae (Synonym: Sphaceloma murrayae) from weeping willow

Sphaceloma murrayae is a significant fungal pathogen of Salix spp. It causes greyish‐white leaf spots, which were reported worldwide except in China. Its morphological characteristics were described in the early literature; however, there is a lack of molecular information pertaining to this fungus. This study identified and characterized three fungal isolates that obtained from weeping willow leaf spots in China. Based on disease symptoms, morphological characteristics and single nomenclature rules for fungi, these isolates are proposed to be new combinations of Elsinoë murrayae (Synonym: S. murrayae). Phylogenetic analysis that combined internal transcribed spacer (ITS), large subunit (LSU), RBP2 and TEF1‐α DNA sequences indicated that E. murrayae isolates and Elsinoë salicina—another Elsinoë sp. isolated from Salix sp.—were distinguishable species. With trypan blue staining and stereomicroscopic observation, we found that large‐scale cell death occurred at 2 days postinoculation (dpi) and slight disease symptoms started at 3 dpi when the conidia were inoculated on Salix babylonica leaves. Pathogenicity analysis revealed that three isolates can successfully infect mature leaves of S. babylonica, Salix fragilis and Salix suchowensis, but not Salix matsudana. In addition, a necrosis‐ and ethylene‐inducing‐like proteins’ (NLP) gene, named EmNLP1, was cloned. The cytotoxicity of EmNLP1 was confirmed by transient assay in tobacco. During infection, EmNLP1 dramatically peaked at 2 dpi and maintained a high‐level expression in the necrosis lesion growing stage.     

The Influence of Water Activity and Temperature on Germination,Growth and Sporulation of <Emphasis Type="Italic">Stachybotrys chartarum</Emphasis> Strains

The objectives were to determine the influence of water activity (a_w, 0.997–0.92) and temperature (10–37°C) and their interactions on conidial germination, mycelial growth and sporulation of two strains of Stachybotrys chartarum in vitro on a potato dextrose medium. Studies were carried out by modifying the medium with glycerol and either spread plating with conidia to evaluate germination and germ tube extension or centrally inoculating treatment media for measuring mycelial growth rates and harvesting whole colonies for determining sporulation. Overall, germination of conidia was significantly influenced by a_w and temperature and was fastest at 0.997–0.98 a_w between 15 and 30°C with complete germination within 24 h. Germ tube extension was found to be most rapid at similar a_w levels and 25–30°C. Mycelial growth rates of both strains were optimal at 0.997 a_w between 25 and 30°C, with very little growth at 37°C. Sporulation was optimum at 30°C at 0.997 a_w. However, under drier conditions, this was optimum at 25°C. This shows that there are differences in the ranges of a_w x temperature for germination and growth and for sporulation. This may help in understanding the role of this fungal species in damp buildings and conditions under which immune-compromised patients may be at risk when exposed to such contaminants in the indoor air environment.     

Thermal response and horizontal transmission of cameroonian isolates of the entomopathogenic fungi Beauveria bassiana and Metarhizium anisopliae – Candidates for microbial controls of the banana root borer Cosmopolites sordidus

Beauveria bassiana and Metarhizium anisopliae are two promising microbial agents for biopesticides development against the banana root borer Cosmopolites sordidus. In this study, germination, mycelial growth, and sporulation of six local Cameroonian isolates of those two species were assessed under seven different thermal conditions (13, 15, 20, 25, 29 33, and 37 °C) to select thermo-tolerant isolates. The Transmission potential of the thermo-tolerant isolates was determined at 25 ± 1 °C by dipping adult weevils in conidial suspensions (3.2 × 10⁸) conidia/ml and mixing these with uninoculated weevils in different proportions (0, 10, 30 and 50%), in groups of 30, and assessing the spread of the mycosis within the group over 35 d of co-incubation. Incubation temperature and isolates significantly affected germination, mycelial growth and conidial production. All isolates had large thermal tolerance ranges (13–33 °C) except MIITAC6.4.2 (20–29 °C). Horizontal transmission resulted in mortality of non-inoculated weevils from 4.63 ± 1.77 to 53.3 ± 11.9%. The isolate BIITAC6.2.2 exhibited high auto-dissemination potential and high conidia yield in cadavers. These results demonstrate the potential use of these isolates for biopesticides development against C. sordidus in Central Africa.     

Increased heat tolerance afforded by oil-based conidial formulations of Metarhizium anisopliae and Metarhizium robertsii

The thermotolerance of oil-based conidial formulations of Metarhizium anisopliae s.l. (IP 46) and Metarhizium robertsii (ARSEF 2575) were investigated. Conidia of IP 46 or ARSEF 2575 were suspended in different adjuvants and exposed to 45?±?0.2°C for 4, 6, 8 or 24?h; their viability was then assessed after 48?h incubation at 27?±?1°C. Conidia heated in pure mineral or vegetable oil exhibited mean relative viability exceeding 70% after 8?h of heat exposure, whereas low germination (≤20%) was observed when conidia were heated in water (Tween 80^® 0.01%), carboxymethyl cellulose gel or emulsifiable oils (Graxol^® or Assist^®) and exposed to heat for 6 or 8?h. In addition, conidia of IP 46 suspended in either pure mineral or canola oil and exposed to heat for 48?h had moderate viability, 57% or 41%, respectively. Unstable oil-in-water emulsions showed a higher percentage of conidia incorporated into oil micellae, while the stable emulsions had higher percentage of conidia outside the oil micellae. The thermotolerance of conidia formulated in stable emulsions, however, did not differ from that of conidia formulated in unstable emulsions. The present study highlights possibilities to alleviate the deleterious effects of heat stress towards Metarhizium spp. conidia applied for controlling arthropod pests and vectors through oil-based formulations.     

Studies on the prolonged storage of Metarhizium anisopliae conidia: effect of growth substrate on conidial survival and virulence against mosquitoes

Metarhizium anisopliae was grown on six complex mycological media and on three types of rice at three moisture levels to determine the effect of growth substrate on conidial yield, viability, and virulence against mosquitoes immediately after spore maturation and after the storage of conidia at four different temperature-relative humidity (RH) combinations over a 1-year period. Conidial yields varied with the mycological media, but the viability and virulence of conidia against mosquitoes produced on all substrates were similar when spores were stored under the same conditions. The storage conditions were more critical to spore survival and virulence than the substrate upon which conidia were produced. The comparison of rice types for conidial production indicated that conidial yield, viability, and virulence to mosquitoes were more dependent upon the moisture level during growth and on the storage conditions that upon the rice used. The best storage conditions among those tested for the retention of both spore viability and virulence against mosquitoes were 19°C–97% RH and 4°C–0% RH.     

Hirsutella thompsonii, a fungal pathogen of mites. I. Biology of the fungus in vitro

Hirsutella thompsonii, a moniliaceous fungus pathogenic to mites, grew and sporulated on sterilised wheat bran. The effects of environmental factors were studied on the fungus grown on potato-dextrose-agar (PDA). The fungus was mesothermophilic. Growth, sporulation and conidial germination were best at 25^o-30 ^oC. Conidia kept at 37 ^oC for 5 days on PDA died, but those held at 5 ^oC germinated upon a subsequent removal to 25 ^oC. Almost all conidial germ tubes survived an 8 h exposure to 3–5% r.h. and to 60% r.h., but subsequently the former grew poorly at 100% r.h. H. thompsonii sporulated equally well in continuous darkness or light, and produced typical chlorinous to light olive-green mycelium and conidia under all conditions. A 2 h exposure of naked mycelium and conidia (which have melanised walls) to u.v. irradiation failed to kill the fungus.     

Optimising inoculum yield and shelf life of Plectosphaerella cucumerina,a potential bioherbicide for Cirsium arvense

Plectosphaerella cucumerina was identified as a potential bioherbicide for controlling Cirsium arvense in Canada and New Zealand. The current study evaluated production conditions using two isolates (one from each country) to determine whether the yield and shelf life of inoculum are suitable for mass production. Mycelial growth and sporulation in culture both increased from 15°C to 25°C and declined at higher temperatures with no mycelial growth at 37°C. The Canadian isolate produced fewer conidia than a New Zealand isolate. Potato dextrose-based liquid media with moderate to high concentrations of carbohydrates (25%, 50%, and 100%) maximised conidia production and these base media produced conidia with the highest germination rate (>80%) both at harvest and after 4 weeks stored at 4°C in 2.5% glycerol, 40% milk glycerol or after air drying. However, after 10-week storage, the conidia failed to germinate. Sporulation occurred during growth on all solid substrates tested (rice, rolled barley, and triticale), but conidial germination was highest on rice and barley, both before and after air drying. By contrast to conidia, 90% of mycelia-infested barley grains were viable after 3 years of storage at room temperature, although viability was lost by this time on the other substrates. This study has shown that the nutritional base is an important determinant of sporulation and shelf life for P. cucumerina. Although the yield of conidia in liquid medium was adequate to justify further development of P. cucumerina as a bioherbicide, improvement in its shelf life, or alternate formulation types that extend the shelf life, must be made for commercial efficiency.     

Some required events in conidial germination of Neurospora crassa.

A temperature-sensitive mutant of Neurospora crassa, with reduced levels of protein synthesis at 37°C, was used to identify some essential events in conidial germination. Conidia of mutant strain psi-1 were incubated for 2 hr at 37°C and then shifted to 20°C. Germination was inhibited at 37°C, but commenced after 1.5 hr at 20°C. Increases in aspartate transcarbamylase activity, cell wall synthesis, and nuclear number preceded germination. However, increases in glutamate dehydrogenase activity, amino acid uptake, and DNA synthesis were inhibited prior to germination. Although all of these events were correlated with germination in control cultures of the mutant at 20°C and of its parent strain at 20 and 37°C, some events were apparently not essential for germination. The requirement for aspartate transcarbamylase activity was demonstrated independently by the failure of strain pyr-3d (lacking the activity) to germinate in the absence of uridine. The dispensability of glutamate dehydrogenase activity and DNA synthesis for the germination of some conidia was verified by the germination of strain am-1 (lacking glutamate dehydrogenase activity) in the absence of glutamate and by the germination of the parent strain in the presence of hydroxyurea (an inhibitor of DNA synthesis). These findings identify some landmarks in germination which may be useful in further studies of the regulation of a developmental program. They also provide preliminary evidence that the resting conidia may contain nuclei arrested at different stages of their division cycle.     

Location of Oospores in Buckwheat Seed and Probable Roles of Oospores and Conidia of Peronospora ducometi in the Disease Cycle on Buchwheat

Oospores of Peronospora ducometi, the causal agent of downy mildew of buckwheat (Fagopyrum esculentum), were found in the calyx remnant attached to the seed, on the inside of the seedcoat and in the spermoderm layer between the seedcoat and the endosperm. This constitutes a first report documenting the location of oospores in buckwheat seed. Systemic infection of seedlings occurred from oospore-infested seed. Conidial germination was greater at 14°C than 25°C. Systemic infection also occurred as the result of conidial infection of leaves. It is proposed that primary infection of buckwheat occurs by the germination of seed-borne oospores resulting in systemic invasion of the seedling by the germtubes, and followed by conidial formation on the cotyledons. Secondary infection occurs initially from conidia produced on the cotyledons as a result of the systemic infection from seed and subsequently as the result of repeated infections by conidia produced on leaf lesions as the disease progresses up the plant.     

Studies on Prolonged Storage of Beauveria bassiana Conidia: Effects of Temperature and Relative Humidity on Conidial Viability and Virulence against Chickpea Borer,Helicoverpa armigera

Unformulated conidia of Beauveria bassiana were stored at five different temperatures (0°, 10°, 20°, 30° and 40°C) at six different relative humidities (RH) (0, 33, 53, 75, 85 and 98%). Conidial viabilities and virulence against third instar larvae of Helicoverpa armigera were determined over a 24‐month period. Conidia survived longest at lower temperatures (0–20°C) and lower RH levels (0–53% RH). At higher temperatures (30–40°C) conidia did not survive. When the temperature was decreased from 30°C to 0°C, at nearly all RH levels the longevity of conidia increased. Conidia remained virulent for third instar larvae of H. armigera under favourable storage conditions for 24 months.     

Selection of surfactant compounds to enhance the dispersion of Beauveria bassiana

This study aimed to select surfactant compounds to improve the dispersion of emulsifiable conidial suspensions of Beauveria bassiana for field application while maintaining high conidia viability. Surfactant compatibility was initially evaluated by colony growth in culture media amended with increasing doses of surfactants. In a second experiment, the conidia germination rate was evaluated after temporary exposure to the compounds under laboratory conditions. The effect of the hydrophilic–lipophilic balance (HLB) of the surfactants on conidia dispersion and viability was assessed using mixtures of the most compatible products and concentration initially selected. Unitol L/20 and Ultranex NP/100 did not show deleterious effect on colony growth on culture media, while Surfom 3409 strongly inhibited conidial germination. Unitol L/20, Ultranex NP/100 and Ultratan D did not interfere in the germination of conidia during the first 10 minutes of exposure. After 120 minutes, germination was greatly reduced at a 0.5% concentration, with the exception of Ultranex NP/100. The higher conidial dispersion and germination were obtained with HLB values between 8 and 12 and lower remaining clusters at HLB 10. Moreover, there was no significant effect of HLB values on insect mortality. Unitol L/20 and Ultranex NP/100 were the most compatible surfactants in concentrations lower than 0.5%. The HLB value selected for dispersion of B. bassiana on water based formulations was 10.     

Enhancing the adhesion of Epicoccum nigrum conidia to peach surfaces and its relationship to the biocontrol of brown rot caused by Monilinia laxa

Aims: To find a formulation of Epicoccum nigrum conidia that enhances its adhesion to peach surfaces and improves its biocontrol efficacy against brown rot caused by Monilinia laxa. Methods and Results: The stickers, glycerol, sodium alginate and methylcellulose; the desiccants, silica powder and talc; and a commercial adhesive (NU FILM 17^®) were added at two different points during the production of an E. nigrum conidial formulation to improve conidial adhesion to peach surfaces. Conidial adhesion levels were determined from the number of E. nigrum conidia that adhered to glass slides or peach surfaces and conidial viability of adherent E. nigrum conidia was determined from the number of colony‐forming units of glass or peach‐adherent E. nigrum that grew on Petri dishes that contained potato dextrose agar. Compared to dried E. nigrum conidia without additives, the adhesion and viability of adherent E. nigrum conidia to peach surfaces were enhanced when either 1·25% sodium alginate or 2·5% methylcellulose was added to the conidial mass after fluid‐bed drying, and when 2·5% methylcellulose was added to the conidial mass after its production and before fluid‐bed drying. Epicoccum nigrum conidial formulations with 2·5% methylcellulose were more effective than dried E. nigrum conidia without additives in reducing the incidence of brown rot in peaches caused by M. laxa. Conclusions: When 2·5% methylcellulose is incorporated into an E. nigrum conidial formulation, the adhesion of E. nigrum conidia to peach surfaces improves and results in efficacious biocontrol of brown rot. Significance and Impact of the Study: A new improved formulation of a biocontrol agent has been developed to improve the control of M. laxa on peaches.