Partial mechanical stimulation facilitates the growth of the rhizomatous plant Leymus secalinus: modulation by clonal integration

Background and Aims

Mechanical stimulation (MS) often induces plants to undergo thigmomorphogenesis and to synthesize an array of signalling substances. In clonal plants, connected ramets often share resources and hormones. However, little is known about whether and how clonal integration influences the ability of clonal plants to withstand MS. We hypothesized that the effects of MS may be modulated by clonal integration.

Methods

We conducted an experiment in which ramet pairs of Leymus secalinus were subjected to three treatments: (1) connected ramet pairs under a homogeneous condition [i.e. the proximal (relatively old) and distal (relatively young) ramets were not mechanically stressed]; (2) connected ramet pairs under a heterogeneous condition (i.e. the proximal ramet was mechanically stressed but the distal ramet was not); and (3) disconnected ramet pairs under the same condition as in treatment 2. At the end of the experiment, we harvested all plants and determined their biomass and allocation.

Key Results

Clonal integration had no significant influence on measured traits of distal L. secalinus ramets without MS. However, under MS, plants with distal ramets that were connected to a mother ramet produced more total plant biomass, below-ground biomass, ramets and total rhizome length than those that were not connected. Partial MS exerted local effects on stimulated ramets and remote effects on connected unstimulated ramets. Partial MS increased total biomass, root/shoot ratio, number of ramets and total rhizome length of stimulated proximal ramets, and increased total biomass, root weight ratio, number of ramets and total rhizome length of connected unstimulated ramets due to clonal integration.

Conclusions

These findings suggest that thigmomorphogenesis may protect plants from the stresses caused by high winds or trampling and that thigmomorphogenesis can be strongly modulated by the degree of clonal integration.     

Shifting effects of physiological integration on performance of a clonal plant during submergence and de-submergence

Background and Aims

Submergence and de-submergence are common phenomena encountered by riparian plants due to water level fluctuations, but little is known about the role of physiological integration in clonal plants (resource sharing between interconnected ramets) in their adaptation to such events. Using Alternanthera philoxeroides (alligator weed) as an example, this study tested the hypotheses that physiological integration will improve growth and photosynthetic capacity of submerged ramets during submergence and will promote their recovery following de-submergence.

Methods

Connected clones of A. philoxeroides, each consisting of two ramet systems and a stolon internode connecting them, were grown under control (both ramet systems untreated), half-submerged (one ramet system submerged and the other not submerged), fully submerged (both ramet systems submerged), half-shaded (one ramet system shaded and the other not shaded) and full-shaded (both ramet systems shaded) conditions for 30 d and then de-submerged/de-shaded for 20 d. The submerged plants were also shaded to very low light intensities, mimicking typical conditions in turbid floodwater.

Key Results

After 30 d of submergence, connections between submerged and non-submerged ramets significantly increased growth and carbohydrate accumulation of the submerged ramets, but decreased the growth of the non-submerged ramets. After 20 d of de-submergence, connections did not significantly affect the growth of either de-submerged or non-submerged ramets, but de-submerged ramets had high soluble sugar concentrations, suggesting high metabolic activities. The shift from significant effects of integration on both submerged and non-submerged ramets during the submergence period to little effect during the de-submergence period was due to the quick recovery of growth and photosynthesis. The effects of physiological integration were not found to be any stronger under submergence/de-submergence than under shading/de-shading.

Conclusions

The results indicate that it is not just the beneficial effects of physiological integration that are crucial to the survival of riparian clonal plants during periods of submergence, but also the ability to recover growth and photosynthesis rapidly after de-submergence, which thus allows them to spread.     

Do Clonal Plants Show Greater Division of Labour Morphologically and Physiologically at Higher Patch Contrasts?

Background

When growing in reciprocal patches in terms of availability of different resources, connected ramets of clonal plants will specialize to acquire and exchange locally abundant resources more efficiently. This has been termed division of labour. We asked whether division of labour can occur physiologically as well as morphologically and will increase with patch contrasts.

Methodology/Principal Findings

We subjected connected and disconnected ramet pairs of Potentilla anserina to Control, Low, Medium and High patch contrast by manipulating light and nutrient levels for ramets in each pair. Little net benefit of inter-ramet connection in terms of biomass was detected. Shoot-root ratio did not differ significantly between paired ramets regardless of connection under Control, Low and Medium. Under High, however, disconnected shaded ramets with ample nutrients showed significantly larger shoot-root ratios (2.8∼6.5 fold) than fully-lit but nutrient-deficient ramets, and than their counterparts under any other treatment; conversely, fully-lit but nutrient-deficient ramets, when connected to shaded ramets with ample nutrients, had significantly larger shoot-root ratios (2.0∼4.9 fold) than the latter and than their counterparts under any other treatment. Only under High patch contrast, fully-lit ramets, if connected to shaded ones, had 8.9% higher chlorophyll content than the latter, and 22.4% higher chlorophyll content than their isolated counterparts; the similar pattern held for photosynthetic capacity under all heterogeneous treatments.

Conclusions/Significance

Division of labour in clonal plants can be realized by ramet specialization in morphology and in physiology. However, modest ramet specialization especially in morphology among patch contrasts may suggest that division of labour will occur when the connected ramets grow in reciprocal patches between which the contrast exceeds a threshold. Probably, this threshold patch contrast is the outcome of the clone-wide cost-benefit tradeoff and is significant for risk-avoidance, especially in the disturbance-prone environments.     

Trampling, defoliation and physiological integration affect growth, morphological and mechanical properties of a root-suckering clonal tree

Background and Aims

Grazing is a complex process involving the simultaneous occurrence of both trampling and defoliation. Clonal plants are a common feature of heavily grazed ecosystems where large herbivores inflict the simultaneous pressures of trampling and defoliation on the vegetation. We test the hypothesis that physiological integration (resource sharing between interconnected ramets) may help plants to deal with the interactive effects of trampling and defoliation.

Methods

In a field study, small and large ramets of the root-suckering clonal tree Populus simonii were subjected to two levels of trampling and defoliation, while connected or disconnected to other ramets. Plant responses were quantified via survival, growth, morphological and stem mechanical traits.

Key Results

Disconnection and trampling increased mortality, especially in small ramets. Trampling increased stem length, basal diameter, fibrous root mass, stem stiffness and resistance to deflection in connected ramets, but decreased them in disconnected ones. Trampling decreased vertical height more in disconnected than in connected ramets, and reduced stem mass in disconnected ramets but not in connected ramets. Defoliation reduced basal diameter, leaf mass, stem mass and leaf area ratio, but did not interact with trampling or disconnection.

Conclusions

Although clonal integration did not influence defoliation response, it did alleviate the effects of trampling. We suggest that by facilitating resource transport between ramets, clonal integration compensates for trampling-induced damage to fine roots.     

Sexual differences in physiological integration in the dioecious shrub Lindera triloba: a field experiment using girdling manipulation

Background and Aims

It is important to consider the modular level when verifying sexual dimorphism in dioecious plants. Nevertheless, between-sex differences in resource translocation among modules (i.e. physiological integration) have not been tested at the whole-plant level. In this study, sexual differences in physiological integration were examined among ramets, within a genet in the dioecious sprouting shrub Lindera triloba, by a field experiment with girdling manipulation.

Methods

Female and male genets were randomly assigned to girdled or intact groups. Girdling of the main ramets was conducted in May 2009 by removing a ring of bark and cambium approx. 1 cm wide at a height of 80–100 cm. The effects of treatment and sex on ramet dynamics (mortality, recruitment and diameter growth) and inflorescence production during 1 year after girdling were examined.

Key Results

The diameter growth rate of main ramets of both sexes was lower at ground level (D₀) but higher at breast height (dbh) in girdled than in intact groups. In sprouted ramets with a dbh of 0–2 cm, males in girdled groups had lower growth rates at D₀ than those of intact groups, whereas no girdling effect was found for females. The main ramets in girdled groups produced more inflorescences than intact groups, irrespective of sex, but male ramets showed a greater response to the treatment than females.

Conclusions

In L. triloba, physiological integration exists at the whole-plant level, and sprouted ramets are dependent on assimilates translocated from main ramets, but this dependence weakens as sprouted ramets get larger. Female sprouted ramets can grow in a physiologically independent manner from the main ramet earlier than those of males. This study highlights the importance of considering modular structures and physiological integration when evaluating sexual differences in demographic patterns of clonal plants.     

Differential influence of clonal integration on morphological and growth responses to light in two invasive herbs

Background and aims

In contrast to seeds, high sensitivity of vegetative fragments to unfavourable environments may limit the expansion of clonal invasive plants. However, clonal integration promotes the establishment of propagules in less suitable habitats and may facilitate the expansion of clonal invaders into intact native communities. Here, we examine the influence of clonal integration on the morphology and growth of ramets in two invasive plants, Alternanthera philoxeroides and Phyla canescens, under varying light conditions.

Methods

In a greenhouse experiment, branches, connected ramets and severed ramets of the same mother plant were exposed under full sun and 85% shade and their morphological and growth responses were assessed.

Key results

The influence of clonal integration on the light reaction norm (connection×light interaction) of daughter ramets was species-specific. For A. philoxeroides, clonal integration evened out the light response (total biomass, leaf mass per area, and stem number, diameter and length) displayed in severed ramets, but these connection×light interactions were largely absent for P. canescens. Nevertheless, for both species, clonal integration overwhelmed light effect in promoting the growth of juvenile ramets during early development. Also, vertical growth, as an apparent shade acclimation response, was more prevalent in severed ramets than in connected ramets. Finally, unrooted branches displayed smaller organ size and slower growth than connected ramets, but the pattern of light reaction was similar, suggesting mother plants invest in daughter ramets prior to their own branches.

Conclusions

Clonal integration modifies light reaction norms of morphological and growth traits in a species-specific manner for A. philoxeroides and P. canescens, but it improves the establishment of juvenile ramets of both species in light-limiting environments by promoting their growth during early development. This factor may be partially responsible for their ability to successfully colonize native plant communities.     

Physiological integration modifies δ15N in the clonal plant Fragaria vesca,suggesting preferential transport of nitrogen to water-stressed offspring

Background and Aims

One of the most striking attributes of clonal plants is their capacity for physiological integration, which enables movement of essential resources between connected ramets. This study investigated the capacity of physiological integration to buffer differences in resource availability experienced by ramets of the clonal wild strawberry plant, Fragaria vesca. Specifically, a study was made of the responses of connected and severed offspring ramets growing in environments with different water availability conditions (well watered or water stressed) and nitrogen forms (nitrate or ammonium).

Methods

The experimental design consisted of three factors, ‘integration’ (connected, severed) ‘water status’ (well watered, water stressed) and ‘nitrogen form’ (nitrate, ammonium), applied in a pot experiment. The effects of physiological integration were studied by analysing photochemical efficiency, leaf spectral reflectance, photosynthesis and carbon and nitrogen isotope discrimination, the last of which has been neglected in previous studies.

Key Results

Physiological integration buffered the stress caused by water deprivation. As a consequence, survival was improved in water-stressed offspring ramets that remained connected to their parent plants. The nitrogen isotope composition (δ¹⁵N) values in the connected water-stressed ramets were similar to those in ramets in the ammonium treatment; however, δ¹⁵N values in connected well-watered ramets were similar to those in the nitrate treatment. The results also demonstrated the benefit of integration for offspring ramets in terms of photochemical activity and photosynthesis.

Conclusions

This is the first study in which carbon and nitrogen isotopic discrimination has been used to detect physiological integration in clonal plants. The results for nitrogen isotope composition represent the first evidence of preferential transport of a specific form of nitrogen to compensate for stressful conditions experienced by a member clone. Water consumption was lower in plants supplied with ammonium than in plants supplied with nitrate, and therefore preferential transport of ammonium from parents to water-stressed offspring could potentially optimize the water use of the whole clone.     

Dynamics of distribution and performance of ramets constructing genets: a demographic�Cgenetic study in a clonal plant, Convallaria keiskei

Background and Aims

In clonal plants producing vegetative offspring, performance at the genet level as well as at the ramet level should be investigated in order to understand the entire picture of the population dynamics and the life history characteristics. In this study, demography, including reproduction and survival, the growth patterns and the spatial distributions of ramets within genets of the clonal herb Convallaria keiskei were explored.

Methods

Vegetative growth, flowering and survival of shoots whose genets were identified using microsatellite markers were monitored in four study plots for 3 years (2003–2005). The size structures of ramets in genets and their temporal shifts were then analysed. Their spatial distributions were also examined.

Key Results

During the census, 274 and 149 ramets were mapped in two 1 × 2 m plots, and 83 and 94 ramets in two 2 × 2 m quadrats. Thirty-eight genotypes were identified from 580 samples. Each plot included 5–18 genets, and most ramets belonged to the predominant genet(s) in each plot. Shoots foliated yearly for several years, but flowering ramets did not have an inflorescence the next year. A considerable number of new clonal offspring persistently appeared, forming a bell-shaped curve of the size structure of ramets in each genet. Comparing the structures modelled by the normal distributions suggested variation among ramets belonging to a single genet and variation among genets. Furthermore, spatial analyses revealed clumped and distant distributions of ramet pairs in a genet, in which the distant patterns corresponded to the linearly elongating clonal growth pattern of this species.

Conclusion

Characteristics of ramet performances such as flowering and recruitment of clonal offspring, in addition to growth, played a large part in the regulation of genet dynamics and distribution, which were different among the studied genets. These might be characteristics particularly relevant to clonal life histories.Key words: Clonal plant, Convallaria keiskei, demography, genet, genetic identification, growth pattern, life history, ramet, spatial distribution     

Adaptation of rhizome connections in drylands: increasing tolerance of clones to wind erosion

Background and Aims

Wind erosion is a severe stress for plants in drylands, but the mechanisms by which plants withstand erosion remain largely unknown. Here, the hypothesis is tested that maintaining rhizome connections helps plants to tolerate erosion.

Methods

Five transects were established across an inland dune in Inner Mongolia, China, and measurements were made of leaf number, biomass per ramet and rhizome depth of Psammochloa villosa in 45 plots. In 40 × 40 cm plots of P. villosa on another dune, the top 15 or 30 cm of sand was removed for 1·5 or 3 months to simulate short- and long-term moderate and severe erosion, respectively, with untreated plots as controls, and the rhizomes at the edges of half of the plots were severed to mimic loss of rhizome connections.

Key Results

Leaf number and biomass per ramet showed quadric relationships with rhizome depth; when rhizomes were exposed to the air, the associated ramets either died or became very weak. Ramet number, leaf number and biomass per plot decreased with increasing erosion severity. Rhizome connections did not affect these traits under control or short-term erosion, but increased them under long-term erosion.

Conclusions

Rhizome connections alleviated the negative effects of erosion on P. villosa, very likely because the erosion-stressed ramets received water and/or photosynthates translocated from those connected ramets that were not subject to erosion. This study provides the first evidence that maintaining rhizome connections helps plants to tolerate erosion in drylands.Key words: Clonal integration, inland-dune grass, Psammochloa villosa, resource sharing, rhizome severing, wind erosion     

Clonal plasticity of aquatic plant species submitted to mechanical stress: escape versus resistance strategy

Background and Aims

The plastic alterations of clonal architecture are likely to have functional consequences, as they affect the spatial distribution of ramets over patchy environments. However, little is known about the effect of mechanical stresses on the clonal growth. The aim of the present study was to investigate the clonal plasticity induced by mechanical stress consisting of continuous water current encountered by aquatic plants. More particularly, the aim was to test the capacity of the plants to escape this stress through clonal plastic responses.

Methods

The transplantation of ramets of the same clone in two contrasting flow velocity conditions was carried out for two species (Potamogeton coloratus and Mentha aquatica) which have contrasting clonal growth forms. Relative allocation to clonal growth, to creeping stems in the clonal biomass, number and total length of creeping stems, spacer length and main creeping stem direction were measured.

Key Results

For P. coloratus, plants exposed to water current displayed increased total length of creeping stems, increased relative allocation to creeping stems within the clonal dry mass and increased spacer length. For M. aquatica, plants exposed to current displayed increased number and total length of creeping stems. Exposure to current induced for both species a significant increase of the proportion of creeping stems in the downstream direction to the detriment of creeping stems perpendicular to flow.

Conclusions

This study demonstrates that mechanical stress from current flow induced plastic variation in clonal traits for both species. The responses of P. coloratus could lead to an escape strategy, with low benefits with respect to sheltering and anchorage. The responses of M. aquatica that may result in a denser canopy and enhancement of anchorage efficiency could lead to a resistance strategy.Key words: Phenotypic plasticity, morphology, submerged aquatic vegetation, clonality, clonal architecture, Potamogeton coloratus, Mentha aquatica, escape, resistance, mechanical stress, thigmomorphogenesis     

Clonal plant allocation to daughter ramets is a simple function of parent size across species and nutrient levels

The evolution of clonal growth is a widespread phenomenon among plant species, characterized by the production of genetically identical clonal fragments (ramets) via rhizomes or stolons that form an interconnected clonal organism (genet). Clonal plant species are known to differ in their investment into ramet production, and exhibit considerable variation in ramet morphology both within and among species. While patterns of resource allocation are thought to be linked to a number of plant characteristics, many analyses are limited by uncertainty in how clonal plants determine the morphology and resources allocated to new ramets. In this study, we attempted to discern what aspects of parent ramets best predicted resource allocation to new daughter ramets, and the relationship between resource allocation and daughter ramet rhizome morphology. We grew two sedge species, Schoenoplectus tabernaemontani and Eleocharis elliptica, in a greenhouse under two levels of fertilizer addition. By harvesting daughter ramets that had initiated stem production, yet remained aphotosynthetic, we were able to isolate parental investment into non-independent daughter ramets at a point where daughter ramet spacer length became fixed. Our results indicate that parent ramets allocated a non-linear proportion of parent rhizome biomass to the production of daughter ramets. Moreover, this relationship was unaffected by environmental nutrient availability. Daughter ramet biomass, in turn, was strongly correlated with daughter ramet spacer length. These observations shed light on key processes governing clonal growth in plants, and their potential application in unifying allocational and morphological perspectives to explore the fitness implications of variability in clonal growth.     

Carbon allocation during fruiting in Rubus chamaemorus

Background and Aims

Rubus chamaemorus (cloudberry) is a herbaceous clonal peatland plant that produces an extensive underground rhizome system with distant ramets. Most of these ramets are non-floral. The main objectives of this study were to determine: (a) if plant growth was source limited in cloudberry; (b) if the non-floral ramets translocated carbon (C) to the fruit; and (c) if there was competition between fruit, leaves and rhizomes for C during fruit development.

Methods

Floral and non-floral ramet activities were monitored during the period of flower and fruit development using three approaches: gas exchange measurements, ¹⁴CO₂ labelling and dry mass accumulation in the different organs. Source and sink activity were manipulated by eliminating leaves or flowers or by reducing rhizome length.

Key Results

Photosynthetic rates were lower in floral than in deflowered ramets. Autoradiographs and ¹⁴C labelling data clearly indicated that fruit is a very strong sink for the floral ramet, whereas non-floral ramets translocated C toward the rhizome but not toward floral ramets. Nevertheless, rhizomes received some C from the floral ramet throughout the fruiting period. Ramets with shorter rhizomes produced smaller leaves and smaller fruits, and defoliated ramets produced very small fruits.

Conclusions

Plant growth appears to be source-limited in cloudberry since a reduction in sink strength did not induce a reduction in photosynthetic activity. Non-floral ramets did not participate directly to fruit development. Developing leaves appear to compete with the developing fruit but the intensity of this competition could vary with the specific timing of the two organs. The rhizome appears to act both as a source but also potentially as a sink during fruit development. Further studies are needed to characterize better the complex role played by the rhizome in fruit C nutrition.Key words: Allocation pattern, ¹⁴C labelling, carbon translocation, carbon reserves, cloudberry, defoliation, fruit production, gas exchange, Rubus chamaemorus, source–sink relationship, flowering     

资源异质性环境中三种匍匐茎草本植物克隆内资源共享和分株功能特化(英文)

研究了 3种来自中国北方林下、草地和碱化草甸匍匐茎型克隆草本植物绢毛匍匐委陵菜 (PotentillareptansL .var.sericophyllaFranch .)、鹅绒委陵菜 (P .anserinaL .)和金戴戴 (Halerpestesruthenica (Jacq .)Qvcz .)对由高光照低养分斑块和低光照高养分斑块组成的资源交互斑块性生境的适应性对策。当生长于高光照低养分条件下分株(HL分株 )与生长于低光照高养分条件下分株 (LH分株 )之间的匍匐茎连接时 ,3种克隆植物HL分株、LH分株以及整个分株对系统 (HL分株 LH分株 )的生物量均得到显著提高。同时 ,LH分株根冠比显著增加 ,而HL分株根冠比显著下降。这表明 ,当互连分株置于由低光照高养分斑块和高光照低养分斑块组成的异质性环境中时 ,3种植物克隆分株均发生了环境诱导的功能特化。克隆内资源共享以及克隆内不同分株的功能特化有利于整个分株系统对局部丰富资源的获取 ,从而能够缓解资源交互斑块性生境对克隆植物的不利影响     

High variation in clonal vs. sexual reproduction in populations of the wild strawberry, Fragaria virginiana (Rosaceae)

Background and Aims

Many plants reproduce both clonally and sexually, and the balance between the two modes of reproduction will vary among populations. Clonal reproduction was characterized in three populations of the wild strawberry, Fragaria virginiana, to determine the extent that reproductive mode varied locally between sites. The study sites were fragmented woodlands in Cook County, Illinois, USA.

Methods

A total of 95 strawberry ramets were sampled from the three sites via transects. Ramets were mapped and genotyped at five variable microsatellite loci. The variability at these five loci was sufficient to assign plants to clones with high confidence, and the spatial pattern of genets was mapped at each site.

Key Results

A total of 27 distinct multilocus genotypes were identified. Of these, 18 genotypes were detected only once, with the remaining nine detected in multiple ramets. The largest clone was identified in 16 ramets. No genets were shared between sites, and each site exhibited markedly different clonal and sexual recruitment patterns, ranging from two non-overlapping and widespread genets to 19 distinct genets. Only one flowering genet was female; the remainder were hermaphrodites.

Conclusions

Local population history or fine-scale ecological differences can result in dramatically different reproductive patterns at small spatial scales. This finding may be fairly widespread among clonal plant species, and studies that aim to characterize reproductive modes in species capable of asexual reproduction need to evaluate reproductive modes in multiple populations and sites.Key words: Clonal structure, gynodioecy, Fragaria virginiana, microsatellites, population genetic structure     

Root Foraging Increases Performance of the Clonal Plant Potentilla reptans in Heterogeneous Nutrient Environments

Background

Plastic root-foraging responses have been widely recognized as an important strategy for plants to explore heterogeneously distributed resources. However, the benefits and costs of root foraging have received little attention.

Methodology/Principal Findings

In a greenhouse experiment, we grew pairs of connected ramets of 22 genotypes of the stoloniferous plant Potentilla reptans in paired pots, between which the contrast in nutrient availability was set as null, medium and high, but with the total nutrient amount kept the same. We calculated root-foraging intensity of each individual ramet pair as the difference in root mass between paired ramets divided by the total root mass. For each genotype, we then calculated root-foraging ability as the slope of the regression of root-foraging intensity against patch contrast. For all genotypes, root-foraging intensity increased with patch contrast and the total biomass and number of offspring ramets were lowest at high patch contrast. Among genotypes, root-foraging intensity was positively related to production of offspring ramets and biomass in the high patch-contrast treatment, which indicates an evolutionary benefit of root foraging in heterogeneous environments. However, we found no significant evidence that the ability of plastic foraging imposes costs under homogeneous conditions (i.e. when foraging is not needed).

Conclusions/Significance

Our results show that plants of P. reptans adjust their root-foraging intensity according to patch contrast. Moreover, the results show that the root foraging has an evolutionary advantage in heterogeneous environments, while costs of having the ability of plastic root foraging were absent or very small.     

Evidence for unexpected higher benefits of clonal integration in nutrient-rich conditions

Physiologically integrated clonal plants cope better with spatial heterogeneity due to their ability to share resources among ramets. According to theoretical predictions and experimental evidence, such benefits of resource sharing should increase with higher patch quality of an exporting ramet and lower patch quality of an importing ramet. This study investigated the effect of spatial heterogeneity in nutrient availability on benefits of clonal integration under plausible scenarios of clonal spread, in which more developed ramets give rise to new ones. Pairs of mother and daughter ramets of a stoloniferous grass, Agrostis stolonifera, were grown in various nutrient conditions. Disconnected pairs of ramets were used as controls. Results showed considerable benefits of integration for developmentally younger daughters and no costs for older mothers in all treatments. Surprisingly, benefits of integration were more pronounced in nutrient-rich daughters, and allocation to integrated daughters decreased with increasing nutrient level of mothers. In addition, integration in general increased root-to-shoot ratio of daughters. One possible explanation of the observed patterns may be prevailing translocation of photosynthates rather than nutrients. Daughters also responded to nutrients by changes in clonal architecture. Number of stolons increased, and maximum stolon length decreased in high nutrient levels. Integration increased maximum stolon length in small daughters. The architectural responses are generally in accord with the foraging behaviour concept. Overall, our results suggest that resource translocation within a clonal fragment need not be easily predictable from a gradient of resource availability.     

The impact of extensive clonal growth on fine-scale mating patterns: a full paternity analysis of a lily-of-the-valley population (Convallaria majalis)

Background and Aims

The combination of clonality and a mating system promoting outcrossing is considered advantageous because outcrossing avoids the fitness costs of selfing within clones (geitonogamy) while clonality assures local persistence and increases floral display. The spatial spread of genetically identical plants (ramets) may, however, also decrease paternal diversity (the number of sires fertilizing a given dam) and fertility, particularly towards the centre of large clumped clones. This study aimed to quantify the impact of extensive clonal growth on fine-scale paternity patterns in a population of the allogamous Convallaria majalis.

Methods

A full analysis of paternity was performed by genotyping all flowering individuals and all viable seeds produced during a single season using AFLP. Mating patterns were examined and the spatial position of ramets was related to the extent of multiple paternity, fruiting success and seed production.

Key Results

The overall outcrossing rate was high (91 %) and pollen flow into the population was considerable (27 %). Despite extensive clonal growth, multiple paternity was relatively common (the fraction of siblings sharing the same father was 0·53 within ramets). The diversity of offspring collected from reproductive ramets surrounded by genetically identical inflorescences was as high as among offspring collected from ramets surrounded by distinct genets. There was no significant relationship between the similarity of the pollen load received by two ramets and the distance between them. Neither the distance of ramets with respect to distinct genets nor the distance to the genet centre significantly affected fruiting success or seed production.

Conclusions

Random mating and considerable pollen inflow most probably implied that pollen dispersal distances were sufficiently high to mitigate local mate scarcity despite extensive clonal spread. The data provide no evidence for the intrusion of clonal growth on fine-scale plant mating patterns.     

Patch size and distance: modelling habitat structure from the perspective of clonal growth

Background and Aims

This study considers the spatial structure of patchy habitats from the perspective of plants that forage for resources by clonal growth. Modelling is used in order to compare two basic strategies, which differ in the response of the plant to a patch boundary. The ‘avoiding plant’ (A) never grows out of a good (resource-rich) patch into a bad (resource-poor) region, because the parent ramet withdraws its subsidy from the offspring. The ‘entering plant’ (E) always crosses the boundary, as the offspring is subsidized at the expense of the parent. In addition to these two extreme scenarios, an intermediate mixed strategy (M) will also be tested. The model is used to compare the efficiency of foraging in various habitats in which the proportion of resource-rich areas (p) is varied.

Methods

A stochastic cellular automata (CA) model is developed in which habitat space is represented by a honeycomb lattice. Each cell within the lattice can accommodate a single ramet, and colonization can occur from a parent ramet''s cell into six neighbouring cells. The CA consists of two layers: the population layer and the habitat. In the population layer, a cell can be empty or occupied by a ramet; in the habitat layer, a cell can be good (resource-rich) or bad (resource-poor). The habitat layer is constant; the population layer changes over time, according to the birth and death of ramets.

Key Results

Strategies M and E are primarily limited by patch distance, whereas A is more sensitive to patch size. At a critical threshold of the proportion of resource-rich areas, p = 0·5, the mean patch size increases abruptly. Below the threshold, E is more efficient than A, whilst above the threshold the opposite is true. The mixed strategy (M) is more efficient than either of the pure strategies across a broad range of p values.

Conclusions

The model predicts more species/genotypes with the ‘entering’ strategy, E, in habitats where resource-rich patches are scattered, and more plants with the ‘avoiding’ strategy, A, in habitats where the connectivity of resource-rich patches is high. The results suggest that the degree of physiological integration between a parent and an offspring ramet is important even across a very short distance because it can strongly influence the efficiency of foraging.     

Effects of clonal integration on plant plasticity in Fragaria chiloensis

The ability of clonal plants to transport substances between ramets located in different microsites also allows them to modify the plastic responses of individual ramets to local environmental conditions. By equalising concentrations of substances between ramets, physiological integration might decrease responses to local conditions. However, integration has also been observed to increase plasticity and induce novel plastic responses in ramets. To ask how integration modifies plant plasticity in the clonal herb, Fragaria chiloensis, ramets were given either low light and high nitrogen or high light and low nitrogen, simulating a pattern of resource patchiness in their native habitat. Ramets in contrasting light/nitrogen treatments were either connected or single. Effects of light/nitrogen and connection were measured at three levels of morphological organisation, the organ, the ramet, and the clonal fragment. Connection between ramets reduced or had no effect on plastic responses in leaf size at the level of the plant organ. This suggested that integration dampened certain plastic responses. Connection induced a new plastic response at the level of the clonal fragment, an increase in allocation to vegetative reproduction in patches of low light and high nitrogen. It is concluded that clonal integration can have different effects on plant plasticity at different levels of plant organisation. It appears that, at least in this species, integration can increase plasticity at the level of the clonal fragment and concentrate vegetative reproduction in particular microsite types.     

Clonal integration affects growth and sediment properties of the first ramet generation,but not later ramet generations under severe light stress

克隆整合影响严重光胁迫下第一分株世代的生长和沉积物特征但不影响 后续分株世代的生长和沉积物特征 克隆整合通过缓冲环境压力和提高资源获取效率使克隆植物受益。然而,在一个克隆系统中,受益于克隆整合的连接分株世代的数量很少受到关注。我们进行了一个盆栽实验来评估沉水植物苦草 (Vallisneria natans)克隆系统内的生理整合程度,该克隆系统由一个母株和3个依次连接的后代分株组成。 母株生长在正常光照下,而后代分株被严重遮荫。母株与后代分株间的匍匐茎被切断或保持连接,但3个后代分株之间的连接仍然存在。与遮荫的后代分株连接时,苦草未遮荫的母株的光合能力显著增强,但其生物量积累大大减少。克隆整合显著增加了第一分株世代(相邻分株)的生物量积累和土壤的碳氮可用性、胞外酶活性和微生物生物量,但没有增加后续分株世代的这些特征。我们的结果表明,在严重光胁迫下,来自苦草母株的支持可能仅限于克隆系统中相邻的后代分株,这暗示着一个分株世代的效应。我们的结果有助于更好地理解克隆植物的层次结构和分段化。这些发现表明克隆整合程度在分株种群的生态相互作用中起着至关重要的作用。