A poliovirus type 1 neutralization epitope is located within amino acid residues 93 to 104 of viral capsid polypeptide VP1.

Using nuclease Bal31, deletions were generated within the poliovirus type 1 cDNA sequences, coding for capsid polypeptide VP1, within plasmid pCW119. The fusion proteins expressed in Escherichia coli by the deleted plasmids reacted with rabbit immune sera directed against poliovirus capsid polypeptide VP1 (alpha VP1 antibodies). They also reacted with a poliovirus type 1 neutralizing monoclonal antibody C3, but reactivity was lost when the deletion extended up to VP1 amino acids 90-104. Computer analysis of the protein revealed a high local density of hydrophilic amino acid residues in the region of VP1 amino acids 93-103. A peptide representing the sequence of this region was chemically synthesized. Once coupled to keyhole limpet hemocyanin, this peptide was specifically immunoprecipitated by C3 antibodies. The peptide also inhibited the neutralization of poliovirus type 1 by C3 antibodies. We thus conclude that the neutralization epitope recognized by C3 is located within the region of amino acids 93-104 of capsid polypeptide VP1.     

Poliovirus Sabin type 1 neutralization epitopes recognized by immunoglobulin A monoclonal antibodies.

Immunity to poliomyelitis is largely dependent on humoral neutralizing antibodies, both after natural (wild virus or vaccine) infection and after inactivated poliovirus vaccine inoculation. Although the production of local secretory immunoglobulin A (IgA) antibody in the gut mucosa may play a major role in protection, most of information about the antigenic determinants involved in neutralization of polioviruses derives from studies conducted with humoral monoclonal antibodies (MAbs) generated from parenterally immunized mice. To investigate the specificity of the mucosal immune response to the virus, we have produced a library of IgA MAbs directed at Sabin type 1 poliovirus by oral immunization of mice with live virus in combination with cholera toxin. The epitopes recognized by 13 neutralizing MAbs were characterized by generating neutralization-escape virus mutants. Cross-neutralization analysis of viral mutants with MAbs allowed these epitopes to be divided into four groups of reactivity. To determine the epitope specificity of MAbs, virus variants were sequenced and the mutations responsible for resistance to the antibodies were located. Eight neutralizing MAbs were found to be directed at neutralization site N-AgIII in capsid protein VP3; four more MAbs recognized site N-AgII in VP1 or VP2. One IgA MAb selected a virus variant which presented a unique mutation at amino acid 138 in VP2, not previously described. This site appears to be partially related with site N-AgII and is located in a loop region facing the VP2 N-Ag-II loop around residue 164. Only 2 of 13 MAbs proved able to neutralize the wild-type Mahoney strain of poliovirus. The IgA antibodies studied were found to be produced in the dimeric form needed for recognition by the polyimmunoglobulin receptor mediating secretory antibody transport at the mucosal level.     

Improved distribution of antigenic site specificity of poliovirus-neutralizing antibodies induced by a protease-cleaved immunogen in mice.

Previous studies showed that the distribution of antigenic site specificity of neutralizing antibodies to type 3 poliovirus obtained with the inactivated poliovirus vaccine can be deficient as compared with that obtained following poliovirus infection. This observation was shown by the relatively low capacity of sera from inactivated-poliovirus-vaccine-immunized persons to neutralize poliovirus cleaved at antigenic site 1. We investigated possibilities for improving the situation in a mouse model. Balb/c mice were immunized with intact or trypsin-cleaved type 3 poliovirus (Saukett strain). Sera from mice immunized with the intact virus readily neutralized the intact virus but neutralized the cleaved virus only rarely. In contrast, cleaved-virus-immunized mice produced antibodies that were able to neutralize the cleaved virus as well as the intact one. Mice immunized with a 100-fold-higher dose of the intact virus produced significant levels of antibodies to the cleaved virus, too. Somewhat surprisingly, mice immunized with high doses of the cleaved virus produced antibodies specific for the intact loop between beta sheets B and C of VP1 (virion protein 1), which should be cleaved in the immunogen. This was shown by a higher titer of antibodies to intact Saukett virus than to the corresponding cleaved virus, as well as to a type 1/type 3 hybrid poliovirus in which only the BC loop amino acids were derived from type 3 poliovirus. The cleavage-induced enhanced availability of antigenic determinants residing outside the BC loop was also shown by increased neutralization titers of monoclonal antibodies specific for some of these other determinants. These results indicate that by using a trypsin-cleaved type 3 poliovirus as a parenteral immunogen, it is possible to change the distribution of antigenic site specificities of neutralizing antibodies to resemble that following poliovirus infection.     

Identification of a T-cell epitope adjacent to neutralization antigenic site 1 of poliovirus type 1.

Proliferative T-cell responses to poliovirus in various strains of mice have been analyzed by using either killed purified virus or capsid protein VP1 synthetic peptides. Following immunization of mice with inactivated poliovirus type 1 (PV1), a specific proliferative response of their lymph node CD4+ T cells was obtained after in vitro stimulation with purified virus. In mice immunized with PV1, PV2, or PV3, a strong cross-reactivity of the T-cell responses was observed after in vitro stimulation with heterologous viruses. By using various strategies, a dominant T-cell epitope was identified in the amino acid 103 to 115 region of capsid polypeptide VP1, close by the C3 neutralization epitope. The T-cell response to VP1 amino acids 103 to 115 is H-2 restricted: H-2d mice are responders, whereas H-2k and H-2b mice do not respond to this T-cell epitope. Immunization of BALB/c (H-2d) mice with the uncoupled p86-115 peptide, which represents VP1 amino acids 86 to 115 and contains both the T-cell epitope and the C3 neutralization epitope, induced poliovirus-specific B- and T-cell responses. Moreover, these mice developed poliovirus neutralizing antibodies.     

Peptide vaccine against canine parvovirus: identification of two neutralization subsites in the N terminus of VP2 and optimization of the amino acid sequence.

The N-terminal domain of the major capsid protein VP2 of canine parvovirus was shown to be an excellent target for development of a synthetic peptide vaccine, but detailed information about number of epitopes, optimal length, sequence choice, and site of coupling to the carrier protein was lacking. Therefore, several overlapping peptides based on this N terminus were synthesized to establish conditions for optimal and reproducible induction of neutralizing antibodies in rabbits. The specificity and neutralizing ability of the antibody response for these peptides were determined. Within the N-terminal 23 residues of VP2, two subsites able to induce neutralizing antibodies and which overlapped by only two glycine residues at positions 10 and 11 could be discriminated. The shortest sequence sufficient for neutralization induction was nine residues. Peptides longer than 13 residues consistently induced neutralization, provided that their N termini were located between positions 1 and 11 of VP2. The orientation of the peptides at the carrier protein was also of importance, being more effective when coupled through the N terminus than through the C terminus to keyhole limpet hemocyanin. The results suggest that the presence of amino acid residues 2 to 21 (and probably 3 to 17) of VP2 in a single peptide is preferable for a synthetic peptide vaccine.     

Mutations conferring resistance to neutralization with monoclonal antibodies in type 1 poliovirus can be located outside or inside the antibody-binding site.

Antigenic variants resistant to eight neutralizing monoclonal antibodies were selected from wild (Mahoney) and attenuated (Sabin) type 1 infectious poliovirions. Cross-immunoprecipitation revealed interrelationships between epitopes which were not detected by cross-neutralization. Operational analysis of antigenic variants showed that seven of eight neutralization epitopes studied were interrelated. Only one neutralization epitope, named Kc, varied independently from all the others. This latter, recognized by C3 neutralizing monoclonal antibody, was present not only on infectious virions but also on heat-denatured (C-antigenic) particles and on isolated capsid protein VP1. Loss of the neutralization function of an epitope did not necessary result from the loss of its antibody-binding capacity. Such potential, but not functional, neutralization epitopes exist naturally on Mahoney and Sabin 1 viruses. Their antibody-binding property could be disrupted by isolating antigenic variants in the presence of the nonneutralizing monoclonal antibody and anti-mouse immunoglobulin antibodies. Single-point mutations responsible for the acquisition of resistance to neutralization in the antigenic variants were located by sequence analyses of their genomes. Mutants selected in the presence of C3 neutralizing monoclonal antibody always had the mutation located inside the antibody-binding site (residues 93 through 103 of VP1) at the amino acid position 100 of VP1. On the contrary, antigenic variants selected in the presence of neutralizing monoclonal antibodies reacting only with D-antigenic particles had mutations situated in VP3, outside the antibody-binding site (residues 93 through 103 of VP1). The complete conversion of the Mahoney to the Sabin 1 epitope map resulted from a threonine-to-lysine substitution at position 60 of VP3.     

Construction of a poliovirus type 1/type 2 antigenic hybrid by manipulation of neutralization antigenic site II.

There are three serotypes of poliovirus, poliovirus type 1 (PV-1), PV-2, and PV-3. These viruses each display four distinct neutralization antigenic sites, designated N-AgI, N-AgII, N-AgIIIA, and N-AgIIIB. It has been demonstrated previously that part of N-AgI can be replaced with heterogeneous amino acid sequences, resulting in hybrid viruses expressing heterogeneous antigenic determinants. To study whether hybrid viruses could be constructed by modifying another antigenic site, a part of N-AgII (amino acids 158 to 173 of VP2) of PV-1(Mahoney) was replaced with the equivalent sequence from PV-2(Lansing). The resulting hybrid was viable and expressed both PV-1 and PV-2 antigenic determinants. When inoculated into rabbits, the hybrid induced neutralizing antibodies against both PV-1 and PV-2, showing that amino acids 158 to 173 of VP2 are able to function as an antigenic site independent of the rest of N-AgII. Manipulation of N-AgII represents a useful alternative method for the production of hybrid polioviruses.     

Mimicry of the immunodominant conformation-dependent antigenic site of hepatitis A virus by motifs selected from synthetic peptide libraries.

Hepatitis A virus (HAV) is a positive-strand RNA virus with a genome length of approximately 7,480 nucleotides. Although HAV morphogenesis is thought to be similar to that of poliovirus, the prototype picornavirus, the complete characterization of the antigenic structure of this virus remains elusive. All the available evidences, however, support the existence, on HAV virions and empty capsids, of an immunodominant neutralization antigenic site which is conformation dependent and whose structure involves residues of both VP1 and VP3 capsid proteins. This particular feature and the difficulty of obtaining high virus yield in tissue cultures make HAV an ideal target for developing synthetic peptides that simulate the structure of its main antigenic determinant. To this end we utilized, in the present work, the divide-couple-recombine approach to generate a random library composed of millions of different hexapeptides. This vast library was screened with a well-characterized anti-HAV monoclonal antibody. By this strategy we identified a peptide that reacted specifically with monoclonal and polyclonal anti-HAV antibodies and, in mice, induced a specific anti-virus immune response. Furthermore, the peptide could also be used in an enzyme-linked immunosorbent assay for revealing a primary immunoglobulin M immune response in sera of acutely infected human patients. Interestingly, no sequence homology was found between the identified peptide and the HAV capsid proteins VP1 and VP3. Collectively, these data represent an additional important paradigm of a mimotope capable of mimicking an antigenic determinant with unknown tertiary structure.     

Unprocessed foot-and-mouth disease virus capsid precursor displays discontinuous epitopes involved in viral neutralization.

A foot-and-mouth disease virus (FMDV) cDNA cassette containing sequences encoding the capsid precursor P1, peptide 2A and a truncated 2B (abbreviated P1-2A) of type C FMDV, has been modified to generate the authentic amino terminus and the myristoylation signal. This construct has been used to produce a recombinant baculovirus (AcMM53) which, upon infection of Spodoptera frugiperda insect cells, expressed a recombinant P1-2A precursor with a high yield. This polyprotein reacted with neutralizing monoclonal antibodies (MAbs) that bind to continuous epitopes of the major antigenic site A (also termed site 1) of capsid protein VP1. Unexpectedly, it also reacted with neutralizing MAbs which define complex, discontinuous epitopes previously identified on FMDV particles. The reactivity of MAbs with P1-2A was quantitatively similar to their reactivity with intact virus and, in both cases, the reactivity with MAbs that recognized discontinuous epitopes was lost upon heat denaturation of the antigen. The finding that a capsid precursor may fold in such a way as to maintain discontinuous epitopes involved in virus neutralization present on the virion surface opens the possibility of using unprocessed capsid precursors as novel antiviral immunogens.     

Molecular basis for linkage of a continuous and discontinuous neutralization epitope on the structural polypeptide VP2 of poliovirus type 1.

We obtained neutralizing monoclonal antibodies against a continuous neutralization epitope on VP2 of poliovirus type 1 strain Mahoney by using a combined in vivo-in vitro immunization procedure. The antibody-binding site was mapped to amino acid residues within the peptide segment (residues 164 through 170) of VP2 by competition with synthetic peptide and sequencing of resistant mutants. Cross-neutralization of these mutants with another neutralizing monoclonal antibody revealed a linkage of the continuous epitope and a discontinuous neutralization epitope involving both loops of the double-loop structure of VP2 at the twofold axis on the surface of the virion.