Comparative study of the upper molar occlusal table morphology among seven human populations

Three-dimensional morphology of the occlusal table of the upper first molars was compared in seven racial populations. Materials were moiré contourograms collected by ourselves over 5 years. Intercuspal distances and cuspal heights were comparatively studied in this analysis. When the populations were arranged in the order of these sizes, their arrangements based on intercuspal distances and cuspal heights were quite different from each other. When intercuspal distances were scaled by protocone-paracone distance, the distances connecting distal cusps were significantly smaller in Mongoloids (Japanese and Eskimo) than in Caucasoids (Dutch and Asiatic Indian), which suggests a reduction tendency of distal cusps in Mongoloids. This tendency was intermediate in Negroids and Australoid. Principal coordinate analysis was carried out on the basis of a similarity matrix including both intercuspal distances and cuspal heights. The result suggested that the three-dimensional shape of the occlusal table was distinguishable in four representative racial populations.     

Geometric morphometric 3D shape analysis and covariation of human mandibular and maxillary first molars

Dental casts of 160 Greek subjects (80 males, 80 females) were scanned by a structured‐light scanner. The upper and lower right first molar occlusal surface 3D meshes were processed using geometric morphometric methods. A total of 265 and 274 curve and surface sliding semilandmarks were placed on the upper and lower molar surfaces, respectively. Principal component analysis and partial least square analysis were performed to assess shape parameters. Molars tended to vary between an elongated and a more square form. The first two principal components (PCs), comprising almost 1/3 of molar shape variation, were related to mesiodistal–buccolingual ratios and relative cusp position. Distal cusps displayed the greatest shape variability. Molars of males were larger than those of females (2.8 and 3.2% for upper and lower molars respectively), but no shape dimorphism was observed. Upper and lower molar sizes were significantly correlated (r² = 0.689). Allometry was observed for both teeth. Larger lower molars were associated with shorter cusps, expansion of the distal cusp, and constriction of the mesial cusps (predicted variance 3.25%). Upper molars displayed weaker allometry (predicted variance 1.59%). Upper and lower molar shape covariation proved significant (RV = 17.26%, P < 0.0001). The main parameter of molar covariation in partial least square axis 1, contributing to 30% of total covariation, was cusp height, in contrast to the primary variability traits exhibited by PC1 and PC2. The aim of this study was to evaluate shape variation and covariation, including allometry and sexual dimorphism, of maxillary and mandibular first permanent molar occlusal surfaces. Am J Phys Anthropol 152:186–196, 2013. © 2013 Wiley Periodicals, Inc.     

Study of the cuspal ridges of the upper first molars in a modern Japanese population

Materials used were dental casts of the upper first molars of modern Japanese subjects, comprising 29 males and 25 females. Their molar occlusal surfaces were photographed by moiré contourography using the standard trigonal plane. The ridges of a cusp, comprising a central ridge and mesial and distal accessory ridges, were identified from the patterns of the moiré fringes. The central ridge was observed in all cusps except for the hypocone in both sexes. Frequencies of the mesial and distal accessory ridges of trigonal cusps were over 90% except for the distal accessory ridge of the metacone, and those of the hypocone were under 25% in both sexes. These values were generally higher in males than in females, especially for the distal accessory ridge of the metacone. The running pattern of the cuspal ridges showed little difference between sexes. The oblique ridge which was higher than the central groove formed a saddle-like structure. This ridge was observed in all materials, but its heights and structural components varied remarkably. In this study, the distal accessory ridge of the metacone was found to be incorporated into the oblique ridge in about 13% of cases. Variability in the running pattern of the ridges within a single cusp was highest in the hypocone and lowest in both the paracone and protocone. The results obtained are considered to represent the stability or reductive tendency of cusps in the upper first molars.     

Cusp size, sexual dimorphism, and heritability of cusp size in twins.

Overall measures of mandibular molars reflect the combined size contributions of the component cusps and ridges. Until now, the size hierarchy of primary and permanent mandibular molar cusps remained unclear. This paper utilizes the relative plane surface areas (basal area dimensions) of the individual molar cusps, as assays of cusp size to demonstrate cusp size variations within populations, antimere cuspal variations, sexual dimorphism, and, the heritability of cusp size. Duplicate dental casts from 199 pairs of like-sexed twins provide the raw dats. Defined anatomic landmarks on the occlusal surfaces were reduced to X-Y rectangular coordinates prior to the computation of the basal areas dimensions. The results establish a cusp size hierarchy specific for molar type, i.e., five-cusped molars with a distal fovea and distal marginal ridge (5fd), five-cusped molars without a distal fovea and without a distal marginal ridge (5o), and four-cusped molars (4c). Sexual dimorphism in cusp size is apparent in 5fd molar cusped but not in 5o molar cusps. However, males have a significantly higher frequency of 5fd molars. Females have a higher frequency of smaller 5o and 4c molars which have fewer crown components. Moreover, female 5o molars have cusps as large as or larger than 5o male molor cusps. Right-side-left-side differences exist between antimere cusps based on relatively low correlations. The mirroring of molor types occurs infrequently. When observed, most intrapair differences for cusp size, using F-ratios, indicate a low component of hereditary variability.     

Carabelli's trait and tooth size of human maxillary first molars

Carabelli's trait is a morphological feature that can occur on the protocone of human maxillary molars. This study tests the hypothesis that Carabelli's trait is correlated statistically with the dimensions of the crown's four principal cusps or whether, as a cingular feature, the trait truly accretes onto an otherwise unaffected crown. Computer-assisted image analysis was used to measure the 6 intercusp distances and 12 angular relationships among cusp tips on the permanent first molar of 300 young adult American whites. Carabelli's complex was scored using an 8-grade ordinal scheme. Crown size was quantified in three ways, namely as 1) maximum mesiodistal and buccolingual diameters, 2) the 6 intercusp distances, and 3) the 12 angular cusp arrangements. There was no sex difference in the morphological expression of Carabelli's trait in this sample. Overall crown size and intercusp distances were significantly and progressively larger in molars with larger Carabelli's trait expressions. There are graded size responses between crown size (mesiodistal and buccolingual diameters), sizes of the four principal cusps, and morphological stage of Carabelli's complex, though the statistical relationships are appreciably stronger in males than females. Carabelli's trait occurs preferentially in larger molars. In contrast, angular (shape) relationships among cusp tips are not discernibly affected by trait size in either sex. There is the situation, then, that Carabelli's trait is developmentally correlated with crown size, but with no apparent alteration of cusp arrangements, suggesting that the increases are isometric across the occlusal table. Why the association is much weaker in females remains speculative, but these data provide yet another line of evidence that, within a population, tooth size is associated in a positive fashion with crown complexity.     

Tooth morphology and other aspects of the Teso dentition

The teeth of over 5,000 Teso schoolchildren members of a Nilo-Hamitic tribe in East Africa, were examined for morphological traits. There was a significant difference between the sexes in the number of cusps on the lower first and second molars, in the prevalence of the cusp of Carabelli, and in variability and agenesis of the upper lateral incisor. The results showed that females consistently favoured tooth reduction. There was also a tendency among those possessing extra cusps on one molar to have extra cusps or other molars. Records kept of the prevalence of the tribal custom of extracting lower central incisors indicated that this practise is rapidly dying out. On another group of teeth which had been extracted from adults common variations of root morphology were noted, together with the fissure pattern of the lower molars. Measurements were made of those teeth which were unworn and were not broken down by dental decay, and the lower third molar was found to be the largest tooth of the series. Observations on the pattern of molar tooth wear showed that the buccal as well as the occlusal surface was strongly affected.     

Occlusal molar surfaces in females with Turner's syndrome

The aim of this study was to identify the molar occlusal features in 73 subjects with the Turner's syndrome (TS) and compared to a control group (CG) of 322 healthy females. The occlusal features were scored on dental plaster casts using the Scoring Procedures for Key Morphological Traits of the Permanent Dentition: The Arizona State University Dental Anthropology System (ASU). The results were analyzed through frequency, percentage and chi 2-test. TS subjects have more frequent reduction of cusp number, distolingual cusp on the upper molars and distal cusp on the lower molar, with the consequent reduction of the occlusal surface. Reduced size of occlusal surface and number cusps on upper molars resulted in the transformation of rhomboid occlusal shape into triangular, with the consequent loss of H-shaped groove system (in the upper right first molars H-shaped groove system was significantly less frequently found in TS (p < 0.05); in the upper left second molars H-shaped groove system was significantly less frequently found in TS (p < 0.01). The X-chromosome aneuploidy can cause a decrease in developmental homeostasis, which results in the alteration of apposition of the enamel and in consequently substantial changes of the molar occlusal morphological features.     

MOLAR OCCLUSION IN LATE TRIASSIC MAMMALS

1. A new genus and species of late Triassic mammal, Megazostrodon rudnerae, from Lesotho in southern Africa is described. The molars are similar to those of the British Eozostrodon parvus except that they are slightly larger and the upper molars have a large external cingulum supporting well-developed cusps. 2. Molar occlusion is discussed in two groups of late Triassic mammals: Eoxostrodon and the closely related Megazostrodon on one the hand and the unnamed primitive symmetrodonts on the other. It is shown that in Eoxostrodon the upper and lower molars did not have matching occlusal surfaces upon eruption but that wear produced matching occlusal surfaces. These surfaces are confined to the internal surface of the upper molars and the external surface of the lower molars and form a series of wide-angled triangles. The main cusp of an upper molar occluded between the main and posterior subsidiary cusp of the lower molar and the main cusp of the lower molar occluded between the main and anterior subsidiary cusp of the upper molar, 3. It is shown that the molars of Docodon and HaIdanodon were possibly derived from those of a primitive mammal such as Eozostrodon. The transition involved the development on the upper molars of an internal extension which, as it increased in size, established contact with the dorsal surfaces of two adjacent lower molars. The process involved is fundamentally different from that leading to tribosphenic molars. 4. In Megaxostrodon the main cusp of the upper molars occluded between the posterior and anterior subsidiary cusps of two adjacent lower molars, i.e. more posteriorly than in Eozostrodon. Primitive Rhaetic symmetrodonts were derived from mammals which had this type of occlusion and which were also closely related to Eoxostrodon and Megaxostrodon. The transition involved a rotation of the subsidiary cusps of the upper molars externally and those of the lower molars internally. This rotation increased the shearing surfaces between occluding upper and lower molars. Cusp rotation was carried further in the acute-angled symmetrodonts (Peralestes and Spalacotherium) and pantotheres. It appears that marked cusp rotation was coupled with the acquisition of transverse movements of the lower jaw during mastication. Transverse movement was apparently not possible in cynodonts, in Eoxostrodon (and related forms) and in Docodon. 5. The evolution of therian molars involves cusp rotation as originally proposed by the Cope—Osborn theory. Criticisms of the Cope—Osborn theory are re-evaluated in light of the new late Triassic material. 6. In Rhaetic symmetrodonts, molar wear produces matching occlusal facets, but the amount of attrition necessary to produce these facets was considerably less than in Eoxostrodon. In acute-angled symmetrodonts and in pantotheres, the molars erupt with more precise occlusal surfaces and attrition was not necessary to produce matching surfaces. 7. On the basis of the structure of the molar teeth it was concluded that Eozostrodon, Megazostrodon and Erythrotherium were closely related to the Rhaetic symmetrodonts. Slightly different occlusal relationships between upper and lower molars indicated that in these early mammals constant occlusal relations were being established. 8. Primitive cynodonts, such as Thrinaxodon, are characterized by alternate tooth replacement; there is a total lack of a constant occlusal relationship between upper and lower postcanine teeth. In Thrinaxodon individual postcanines were replaced several times. The crown structures of successive generations of postcanines were different so that a freshly erupted postcanine tooth had a crown structure quite distinct from the tooth which it replaced. It has been shown that the crown structure of one of the generations of postcanine teeth of Thrinaxodon is almost identical to that of Eozostrodon except that Thrinaxodon postcanines have a single root, On the basis of this similarity and the over-all structure of the primitive cynodont skull, it was concluded that Rhaetic mammals (excluding ictidosaurs and haramyids) could be derived from primitive cynodonts. 9. All the orders of Jurassic mammals (with the possible exception of multituber-culates) were probably derived from late Triassic mammals. The apparent close relationship of late Triassic mammals is evidence of a monophyletic origin of this class.     

Variation in modern human premolar enamel formation times: implications for Neandertals

A recent study demonstrated that variation in enamel cap crown formation in the anterior teeth is greater than that in the molars from two geographically distinct populations: native indigenous southern Africans and northern Europeans. Eighty southern African and 69 northern European premolars (P3 and P4) were analyzed in the present study. Cuspal, lateral, and total enamel formation times were assessed. Although cuspal enamel formation times were not consistently different between the two populations, both lateral and total enamel formation times generally were. Bonferroni-corrected t-tests showed that southern Africans had significantly shorter lateral enamel formation time for five of the six cusps, as well as significantly shorter total enamel formation time for these same cusps. An analysis of covariance performed on the lingual cusps of the upper third and fourth premolars showed that differences in enamel formation times between these populations remained when crown height was statistically controlled. A further goal of this study was to ascertain, based on perikymata counts, what Neandertal periodicities would have to be in order for their teeth to have lateral enamel formation times equivalent to either southern Africans or northern Europeans. To this end, perikymata were counted on 32 Neandertal premolars, and the counts were inserted into regression formulae relating perikymata counts to periodicity for each population and each tooth type. Neandertal enamel formation times could be equivalent to those of southern Africans or northern Europeans only if their hypothetical periodicities fall within the range of periodicities for African apes and modern humans (i.e., 6-12 days). The analysis revealed that both populations could encompass Neandertal timings, with hypothetical periodicities based on the southern African population necessitating a lower range of periodicity (6-8 days) than those based on the northern European population (8-11 days).     

Associations between Carabelli trait and cusp areas in human permanent maxillary first molars

Few dental anthropological studies have investigated the associations between tooth crown size and crown traits in humans using quantitative methods. We tested several hypotheses about overall crown size, individual cusp areas, and expression of Carabelli cusps in human permanent first molars by obtaining data from standardized occlusal photographs of 308 Australians of European descent (171 males and 137 females). Specifically, we aimed to calculate the areas of the four main molar cusps, and also Carabelli cusp, and to compare the relative variability of cusp areas in relation to timing of development. We also aimed to compare cusp areas between males and females and to describe how Carabelli cusp interacted with other molar cusps. Measurements included maximum crown diameters (mesiodistal and buccolingual crown diameters), the areas of the four main cusps, and the area of Carabelli cusp. The pattern of relative variability in absolute areas of molar cusps corresponded with their order of formation, the first-forming paracone displaying the least variation, and the last-forming Carabelli cusp showing the greatest. Overall crown size and areas of individual cusps all showed sexual dimorphism, with values in males exceeding those in females. Sexual dimorphism was smallest for paracone area and greatest for Carabelli cusp area. Overall crown size and cusp areas were larger in individuals displaying a Carabelli cusp, especially the hypocone area. Although the combined area of the protocone and a Carabelli cusp was greater in cuspal forms than noncuspal forms, protocone area alone was significantly smaller in the former. Our findings lead us to propose that, in individuals with the genotype for Carabelli trait expression, larger molar crowns are more likely to display Carabelli cusps, whereas molars with smaller crowns are more likely to display reduced forms of expression of the trait. We suggest that the pattern of folding of the internal enamel epithelium in developing molar crowns, particularly in the protocone region, can be modified by a developing Carabelli cusp.     

Occlusal surface pattern of the lower molars and the second deciduous molar among the living Polynesians

The occlusal surface pattern of the lower molars and the second deciduous molar among the Polynesians living in Western Samoa was studied on plaster casts. The following are the characteristic traits of this race. The occlusal surface pattern of the first and second lower molars falls within the range of variation of the Mongoloid racial group. In general, the variation of the furrow pattern is remarkable, but the tendency of reduction of number of cusps is not conspicuous. The frequency of C₆ in the lower molars and C₇ in m₂ is far higher than in any other population, but the frequency of C₇ in M₁ or M₂ is not noticeably different.     

Molar development in common chimpanzees (Pan troglodytes)

Numerous studies have reported on enamel and dentine development in hominoid molars, although little is known about intraspecific incremental feature variation. Furthermore, a recent histological study suggested that there is little or no time between age at chimpanzee crown completion and age at molar eruption, which is unlikely given that root growth is necessary for tooth eruption. The study presented here redefines growth standards for chimpanzee molar teeth and examines variation in incremental features. The periodicity of Retzius lines in a relatively large sample was found to be 6 or 7 days. The number of Retzius lines and cuspal enamel thickness both vary within a cusp type, among cusps, and among molars, resulting in marked variation in formation time. Daily secretion rate is consistent within analogous cuspal zones (inner, middle, and outer enamel) within and among cusp types and among molar types. Significantly increasing trends are found from inner to outer cuspal enamel (3 to 5 microns/day). Cuspal initiation and completion sequences also vary, although sequences for mandibular molar cusps are more consistent. Cusp-specific formation time ranges from approximately 2 to 3 years, increasing from M1 to M2, and often decreasing from M2 to M3. These times are intermediate between radiographic studies and a previous histological study, although both formation time within cusps and overlap between molars vary considerably. Cusp-specific (coronal) extension rates range from approximately 4 to 9 microns/day, and root extension rates in the first 5 mm of roots range from 3 to 9 microns/day. These rates are greater in M1 than in M2 or M3, and they are greater in mandibular molars than in respective maxillary molars. This significant enlargement of comparative data on nonhuman primate incremental development demonstrates that developmental variation among cusp and molar types should be considered during interpretations and comparisons of small samples of fossil hominins and hominoids.     

What molars contribute to an emerging understanding of lateral enamel formation in Neandertals vs. modern humans

Two hypotheses, based on previous work on Neandertal anterior and premolar teeth, are investigated here: (1) that estimated molar lateral enamel formation times in Neandertals are likely to fall within the range of modern human population variation, and (2) that perikymata (lateral enamel growth increments) are distributed across cervical and occlusal halves of the crown differently in Neandertals than they are in modern humans. To investigate these hypotheses, total perikymata numbers and the distribution of perikymata across deciles of crown height were compared for Neandertal, northern European, and southern African upper molar mesiobuccal (mb) cusps, lower molar mesiobuccal cusps, and the lower first molar distobuccal (db) cusp. Sample sizes range from five (Neandertal M(1)db) to 29 (southern African M(1)mb). Neandertal mean perikymata numbers were found to differ significantly from those of both modern human samples (with the Neandertal mean higher) only for the M(2)mb. Regression analysis suggests that, with the exception of the M(2)mb, the hypothesis of equivalence between Neandertal and modern human lateral enamel formation time cannot be rejected. For the M(2)mb, regression analysis strongly suggests that this cusp took longer to form in the Neandertal sample than it did in the southern African sample. Plots of perikymata numbers across deciles of crown height demonstrate that Neandertal perikymata are distributed more evenly across the cervical and occlusal halves of molar crowns than they are in the modern human samples. These results are integrated into a discussion of Neandertal and modern human lateral enamel formation across the dentition, with reference to issues of life history and enamel growth processes.     

Morphologic characteristics of the Alaskan Eskimo dentition: IV. Cusp number and groove patterns of mandibular molars

Data on the permanent dentition of 63 coastal and 33 inland Alaskan Eskimos are presented. The number of cusps and groove pattern of the mandibular molars were recorded. Agenesis of the mandibular third molars was classified and the mesiodistal and buccolingual crown diameter was measured on the first and the second mandibular molars. The predominant pattern of the lower first molars was Y5, while for the second molar the dominating patterns were +5 and +4. In the lower third molar, +5 was found in the majority of cases. For M1 and M2, men showed a stronger tendency toward a conservative pattern than did women. In the case of M2, the inland population exhibited a more conservative trait than did the coastal population. No connection was seen between the groove pattern and agenesis of M3, however, a reduction in the mesiodistal crown diameter for the second molars was seen when the number of cusps is reduced from 5 to 4.     

Morphologic characteristics of the Alaskan Eskimo dentition. III. Number of cusps on the upper permanent molars

A study of 35 coastal and 64 inland Alaskan Eskimos revealed a reduction in the number of cusps from the first to the third maxillary molar. While 97% of the first molars had four cusps, only 39.6% of the second molars and 15.2% of the third molars had that number. The reduction occurs through elimination of the hypocone. No statistically significant sex difference in the trend towards reduction in the cusp numbers was found. In the inland female group the occurrence of four cusps in the maxillary second molar was statistically higher than in the coastal female group. This may be due to a more pronounced racial admixture of white people along the coast. A similar difference, although not statistically significant, was found in the corresponding male groups. Alaskan Eskimos have a tendency towards a lower frequency of four cusps on all three maxillary molars than Aleuts. Only the second molar exhibited a statistically significant difference in this respect. A statistical evaluation revealed that in the Alaskan Eskimo maxillary first and third molars the reduction of cusps is independent of the size and form of the molars and of the suppression of the third molar. For the second molar, however, the groups with four well-developed cusps showed significantly larger buccolingual diameter.     

On the Occlusal Fit of Tribosphenic Molars: Are We Underestimating Species Diversity in the Mesozoic?

The complex occlusal fits between tribosphenic teeth are a rich source of information for taxonomic, phylogenetic, and evolutionary analysis. The degree of fit between upper and lower cheek teeth has been used to refer specimens to species-level taxa, but statistical data on occlusal fit in relation to taxonomic identity have been lacking. We used landmarks on upper and lower first molars of 20 bat populations representing 16 species to assess the degree of occlusal fit (1) between teeth from the same individual; (2) between teeth from different individuals belonging to the same populations; and (3) between teeth belonging to different populations. We found that the fit of teeth belonging to different populations was significantly worse than between those of the same population and that the degree of misfit increased linearly with time since common ancestry, albeit with substantial variance. We used our comparisons to assess the species-level diversity within Batodon, the smallest known placental mammal from the Cretaceous. Our data suggest, with caveats, that instead of belonging to a single species, the specimens assigned to Batodon represent at least two species as different as those belonging to different genera or families of living bats.     

A unique form of dental bilophodonty and a functional interpretation of peculiarities in the masticatory system of Arsinoitherium (mammalia,Embrithopoda)

The highly autapomorphic upper molar bilophodonty of the Oligocene mammal, Arsinoitherium (Embrithopoda) is an extreme form of dilambdodonty effected by lingual positioning of normally buccally situated cusps with reduction of lingual cusps. This effectively limits the molar dentition to a single phase shearing occlusal motion. Molar and premolar morphology is very different, premolars exhibiting high longitudinal ectolophs and typical two phase occlusal morphology. A double faceted mandibular condyle and angular discontinuity between lower molar and premolar dentitions is interpreted as a means of separating premolar from molar occlusion. A bifunctional masticatory system is proposed whereby efficient premolar occlusion is achieved only after a repositioning of the temporomandibular joint. Loss of phase II occlusion in the molars is compensated by maintenance of a crushing/grinding mode in the premolars. This coupled with the ability to maintain high occlusal pressures along the length of the mandible explains the unbroken dental arcade. Arsinoitheres therefore possess an extremely specialised masticatory apparatus and are interpreted as highly selective browsing herbivores.     

Dental morphology of Jews from Yemen and Cochin

60 dental plaster casts of Jewish adolescents, half of them children of immigrants from Yemen and half of them from Cochin (India), were investigated as to tooth measurements and morphologic traits. Each group was composed of an equal number of males and females. Cochini showed a sex specific dimorphism in tooth size, a relatively larger bucco-lingual diameter of upper and lower first premolars, lower frequency of Carabelli's tuberculum and in males larger tooth measurements than their Yemenite counterparts. The variability of ²I² was significantly higher in females than in males, and in Yemenite girls than in Cochini. The molar patterns were similar in both groups with regard to number and development of cusps and occlusal form of the mandibular molars.     

Genetic structure of a tribal population, the Yanomama Indians. XIII. Dental microdifferentiation.

Data are presented on the frequency of the following eight dental traits in 635 Yanomama and 65 Makiritare Indians: upper central incisor rotation or winging, shoveling of maxillary incisors, maxillary molar hypocone reduction, Carabelli's trait, mandibular molar cusp number, mandibular molar cusp pattern rotation of second lower premolar, and pattern of second lower premolar cusps. Yanomama dentition is unusual in the high frequency of six cusps on the mandibular molars. There is marked dental microdifferentiation between villages; significant agreement was observed between a matrix of pairwise "dental distances" based on six morphological traits and corresponding matrices based on 11 genetic systems and on geographic location.