Detection of microRNAs in dried serum blots

We observed the preservation of microRNAs in unrefrigerated dried serum blots. Preservation was not adversely affected by drying or storing at 37, 45, or 60 °C instead of room temperature, but it was harmed when blots were dried incompletely before storage. Preservation of microRNAs in serum was not diminished if, instead of being kept frozen at −80 °C, it was stored as dried blots at room temperature for 5 months or at 37 °C for 4 weeks. Thus, dried blots can be a convenient and safer way to save, transport, and store serum for microRNA assays.     

Long-lived southern blots using RNA probes

Conditions for preparation and hybridization of Southern blots are described which assure reusability through 15 to 25 cycles. The procedure relies on the use of charge-modified nylon membranes and^[32P]-labelled RNA probes.     

Visualization of antigenic proteins on Western blots

A new technique for the detection of antibodies bound to proteins blotted onto nitrocellulose paper was developed. The method is rapid, sensitive, and does not require radioactive probes. Proteins transferred to nitrocellulose paper are first reacted with primary antibody followed by reaction with an alkaline phosphatase conjugated second antibody. The phosphatase activity is then visualized using an agar gel impregnated with the histochemical phosphatase stain 5-bromo-4-chloro-3-indolyl phosphate (BCIP) (J. P. Horwitz, J. Chua, M. Noel, J. T. Donatti, and J. Freisler (1966) J. Med. Chem. 9, 447; Sigma Chemical Co., Technical bulletin No. 710-EP (1978]. Antigen-antibody complexes give rise to sharp, permanent blue stained bands both on the nitrocellulose paper and in the agar overlay gel. This procedure allows detection of bands containing less than 20 ng of protein.     

A program for computer-assisted scoring of Southern blots

SCORE, a program for computer-assisted scoring of Southern blots of clone DNA, retains the use of expert human judgment while taking over much of the drudgery of the scoring task. The primary functions of the program are to help make an aligned overlay of the fluorescence gel image and the autoradiogram blot image, to keep track of band and lane locations and to store the resulting data directly into a database. Use of SCORE has resulted in greatly increased efficiency and accuracy.     

Behavior of acyl carrier proteins on western blots

Acyl carrier proteins (ACPs) from Escherichia coli and Euglena were analyzed on Western blots using rabbit antibodies raised against E. coli ACP. Euglena ACP, unlike that from E. coli, behaves upon electrophoresis under denaturing conditions as its size would predict. Oligomeric forms of both ACPs were evident on Western blots, but the bacterial ACP had more tendency to aggregate. That the oligomeric forms were not due to impurities was shown by their regeneration from low-Mr protein, reaction with antibodies isolated from low-Mr protein, and by molecular weight determination of the ACP by low-angle laser light scattering.     

Western blots using stained protein gels.

A general method is described for the electrophoretic transfer of proteins from stained gels to membranes and subsequent Western detection of specific proteins on the stained membranes. Proteins are separated by sodium dodecyl sulfate polyacrylamide gel electrophoresis, and the gels are stained using either of two different methods followed by electrophoretic transfer to nitrocellulose or Immobilon-P membranes. The transferred proteins remain stained during immunodetection, providing a set of background markers for protein location and size determination.     

Use of bidirectional blots in differential display analysis

We have used bidirectional transfer methods in concert with SMART total cDNA complex probes to sequentially screen differential display arrays. In this report we show the utility of this methodology in examining a manganese superoxide dismutase cDNA fragment which we detected while evaluating the effects of the proinflammatory cytokines IL1-beta, TNF-alpha, and IL6 on human umbilical vein endothelial cell (HUVEC) gene expression. By using parallel hybridization of the bidirectional blots with SMART total cDNA (32)P probes derived from untreated or cytokine-treated HUVECs, differential expression between cell treatments can be clearly evaluated. Subsequent screening using this bidirectional blot method results in detection of modulated cDNA clones. Northern and total cDNA blot hybridization with the cDNA clonal fragment confirmed both modulated expression and the efficacy of this screening method. These procedures allow one to use bidirectional blots to evaluate band modulation on agarose gels which are initially run to evaluate the reamplification of display fragments or to confirm cloned cDNA fragments. Thus, bidirectional blot analysis using SMART total cDNA probes allows direct evaluation of differential display bands from the initial reamplification through plasmid insert cloning, increasing the investigator's ability to eliminate false-positive bands during each step of analysis.     

DNA-binding domains of fibronectin probed using Western blots

Human plasma fibronectin was subjected to limited proteolysis, and its DNA-reactive polypeptides were distinguished using the protein blot technique. The polypeptides were separated electrophoretically by SDS gel electrophoresis, transferred to nitrocellulose and probed with radiolabeled human lymphocyte DNA. The major DNA-binding domains identified by the protein blots were comparable to the polypeptides identified using affinity chromatography on DNA-cellulose.     

An automated rotisserie system for processing Western blots

An apparatus to automate completely the processing of Western blots is described. The prototype is based on a popular rotisserie system design. The incubation chamber consists of an inner cylinder that rotates inside an outer cylinder (incubation chamber). The blot is contained in the inner cylinder. Two magnets are mounted at one end of the inner cylinder, and rotation of the inner cylinder is effected by two magnets mounted on a motor drive outside the incubation chamber. Movement of chemicals into and out of the incubation chamber is driven pneumatically, and the entire process is controlled by a computer. Processing a blot for chemiluminescent detection takes 7 h to complete without human intervention. The quality of the resulting image is comparable to or better than a blot using manual processing. In addition, the prototype is capable of re-collecting all three antisera for future use.     

Copper iodide staining of protein blots on nitrocellulose membranes

Copper iodide staining which can detect protein levels as low as 100-150 pg/mm2 on nitrocellulose membranes is described. The staining is quantitative as measured by densitometry. Staining is complete within 5 min and may be removed by washing the membrane for 15 min without loss of immunoreactivity. The stain utilizes a reddish-brown precipitate of copper iodide in highly alkaline conditions. Because of its high sensitivity, convenience, and low cost, this stain may be more practical than amido black or gold- and silver-based stains for most laboratory purposes.     

Immunodetection with streptavidin-acid phosphatase complex on Western blots

A technique for the detection of nanogram amounts of protein blotted onto nitrocellulose membranes has been developed using nonradioactive probes. Protein transferred to nitrocellulose membranes is detected by a specific antibody followed by incubation with biotinylated anti-antibody. After addition of streptavidin-acid phosphatase complex, incubation with fast violet B salt produces sharp magenta bands. This method allows detection of bands containing less than 20 ng of protein. The procedure does not use radioactive or carcinogenic materials.     

Multiplexed miRNA northern blots via hybridization chain reaction

Northern blots enable detection of a target RNA of interest in a biological sample using standard benchtop equipment. miRNAs are the most challenging targets as they must be detected with a single short nucleic acid probe. With existing approaches, it is cumbersome to perform multiplexed blots in which several RNAs are detected simultaneously, impeding the study of interacting regulatory elements. Here, we address this shortcoming by demonstrating multiplexed northern blotting based on the mechanism of hybridization chain reaction (HCR). With this approach, nucleic acid probes complementary to RNA targets trigger chain reactions in which fluorophore-labeled DNA hairpins self-assemble into tethered fluorescent amplification polymers. The programmability of HCR allows multiple amplifiers to operate simultaneously and independently within a blot, enabling straightforward multiplexing. We demonstrate simultaneous detection of three endogenous miRNAs in total RNA extracted from 293T and HeLa cells. For a given target, HCR signal scales linearly with target abundance, enabling relative and absolute quantitation. Using non-radioactive HCR, sensitive and selective miRNA detection is achieved using 2′OMe-RNA probes. The HCR northern blot protocol takes ∼1.5 days independent of the number of target RNAs.     

An automated rotisserie system for processing Western blots

An apparatus to automate completely the processing of Western blots is described. The prototype is based on a popular rotisserie system design. The incubation chamber consists of an inner cylinder that rotates inside an outer cylinder (incubation chamber). The blot is contained in the inner cylinder. Two magnets are mounted at one end of the inner cylinder, and rotation of the inner cylinder is effected by two magnets mounted on a motor drive outside the incubation chamber. Movement of chemicals into and out of the incubation chamber is driven pneumatically, and the entire process is controlled by a computer. Processing a blot for chemiluminescent detection takes 7 h to complete without human intervention. The quality of the resulting image is comparable to or better than a blot using manual processing. In addition, the prototype is capable of re-collecting all three antisera for future use.     

A high-affinity reversible protein stain for Western blots

We describe a reversible staining technique, using MemCode, a reversible protein stain by which proteins can be visualized on nitrocellulose and polyvinylidine fluoride (PVDF) membranes without being permanently fixed to the membrane itself. This allows subsequent immunoblot analysis of the proteins to be performed. The procedure is applicable only to protein blots on nitrocellulose and PVDF membranes. MemCode is a reversible protein stain composed of copper as a part of an organic complex that interacts noncovalently with proteins. MemCode shows rapid protein staining, taking 30s to 1 min for completion. The method is simple and utilizes convenient application conditions that are compatible with the matrix materials and the protein. The stain is more sensitive than any previously described dye-based universal protein staining system. The turquoise-blue-stained protein bands do not fade with time and are easy to photograph compared to those stained with Ponceau S. Absorbance in the blue region of the spectrum offers good properties for photo documentation and avoids interference from common biological chromophores. The stain on the protein is easily reversible in 2 min for nitrocellulose membrane and in 10 min for PVDF membrane with MemCode stain eraser. The stain is compatible with general Western blot detection systems, and membrane treatment with MemCode stain does not interfere with conventional chemiluminescent or chromogenic detection using horseradish peroxide and alkaline phosphatase substrates. The stain is also compatible with N-terminal sequence analysis of proteins.     

Hybridization and detection of digoxigenin probes on RNA blots

This article describes nonradioactive probing of a Northern blot. The method employs digoxigenin-labeled probes. Antidigoxigenin antibody/alkaline phosphate conjugate, and a chemiluminescent substrate are subsequently used in the detection system.