Pathogenomics of the Virulence Plasmids of Escherichia coli

Summary: Bacterial plasmids are self-replicating, extrachromosomal elements that are key agents of change in microbial populations. They promote the dissemination of a variety of traits, including virulence, enhanced fitness, resistance to antimicrobial agents, and metabolism of rare substances. Escherichia coli, perhaps the most studied of microorganisms, has been found to possess a variety of plasmid types. Included among these are plasmids associated with virulence. Several types of E. coli virulence plasmids exist, including those essential for the virulence of enterotoxigenic E. coli, enteroinvasive E. coli, enteropathogenic E. coli, enterohemorrhagic E. coli, enteroaggregative E. coli, and extraintestinal pathogenic E. coli. Despite their diversity, these plasmids belong to a few plasmid backbones that present themselves in a conserved and syntenic manner. Thanks to some recent research, including sequence analysis of several representative plasmid genomes and molecular pathogenesis studies, the evolution of these virulence plasmids and the implications of their acquisition by E. coli are now better understood and appreciated. Here, work involving each of the E. coli virulence plasmid types is summarized, with the available plasmid genomic sequences for several E. coli pathotypes being compared in an effort to understand the evolution of these plasmid types and define their core and accessory components.     

Plasmid size can affect the ability of Escherichia coli to produce high-quality plasmids

Large molecular weight plasmids are often used in gene therapy and DNA vaccines. To investigate the effect of plasmid size on the performance of Escherichia coli host strains during plasmid preparation, we employed E. coli JM109 and TOP10 cells to prepare four plasmids ranging from 4.7 to 16.8?kb in size. Each plasmid was extracted from JM109 and TOP10 cells using an alkaline lysis mini-preparation method. However, when commercial kits were used to extract the same plasmids from JM109 cells, the large molecular weight plasmids substantially degraded, compared with their smaller counterparts. No degradation was observed when the four plasmids were extracted from E. coli TOP10 cells using the same commercial kit. We conclude, therefore, that the performance of E. coli in high quality plasmid preparations can be affected by plasmid size.     

Rapid and Efficient Protocols for Throughput Extraction of High Quality Plasmid DNA from Strains of Xanthomonas axonopodis pv malvacearum and Escherichia coli

Efficient protocols developed to isolate low copy plasmid DNA from Xanthomonas axonopodis pv malvacearum (Xam) and high copy recombinant plasmid DNA from Escherichia coli are described. The protocol for extraction of low copy plasmid DNA from strains of Xam yielded high concentrations of plasmid DNA and used easily available and inexpensive chemicals in simple steps. The protocol for plasmid extraction from E. coli was rapid, cost-effective and yet yielded high concentrations of plasmid DNA. The procedures are simple and can be used to process several samples at one time. The plasmid DNA extracted by two methods was sufficiently pure, free from protein and other cellular contaminants and amenable to various molecular manipulations.     

Efficiency of the pTF-FC2 pas Poison-Antidote Stability System in Escherichia coli Is Affected by the Host Strain, and Antidote Degradation Requires the Lon Protease

The stabilization of a test plasmid by the proteic, poison-antidote plasmid addiction system (pas) of plasmid pTF-FC2 was host strain dependent, with a 100-fold increase in stability in Escherichia coli CSH50, a 2.5-fold increase in E. coli JM105, and no detectable stabilization in E. coli strains JM107 and JM109. The lethality of the PasB toxin was far higher in the E. coli strains in which the pas was most effective. Models for the way in which poison-antidote systems stabilize plasmids require that the antidote have a much higher rate of turnover than that of the toxin. A decrease in host cell death following plasmid loss from an E. coli lon mutant and a decrease in plasmid stability suggested that the Lon protease plays a role in the rate of turnover of PasA antidote.     

Restriction map of bacteriophage SP02: ordering the SacI fragments and identification of the DNA termini

A plasmid that is able to replicate in both Escherichia coli and Streptococcus sanguis has been constructed by the in vitro joining of the pACYC184 (Cm^r Tc^r) and pVA749 (Em^r) replicons. This plasmid, designated pVA838, is 9.2 kb in size and expresses Em^r in both E. coli and S. sanguis. Its Cm^r marker is expressed only in E. coli and may be inactivated by addition of DNA inserts at its internal EcoRI or PvuII sites. The pVA838 molecule also contains unique SalI, SphI, BamHI, NruI and XbaI cleavage sites suitable for molecular cloning. pVA838 may be amplified in E. coli but not in S. sanguis. We have used the pVA838 plasmid as a shuttle vector to clone streptococcai plasmid fragments in E. coli. Such chimeras isolated from E. coli were readily introduced into S. sanguis by transformation.     

Site-specific integration of the phage ΦCTX genome into the Pseudomonas aeruginosa chromosome: characterization of the functional integrase gene located close to and upstream of attP

The site-specific integration of the phage ?CTX genome, which carries the gene for a pore-forming cytotoxin, into the Pseudomonas aeruginosa chromosome was analysed. The 1,167 by integrase gene, int, located immediately upstream of the attachment site, attP, was characterized using plasmid constructs, harbouring the integration functions, and serving as an integration probe in both P. aeruginosa and Escherichia coli. The attP plasmids p1000/p400 in the presence of the int plasmid pIBH and attP-int plasmids pINT/pINTS can be stably integrated into the P. aeruginosa chromosome. Successful recombination between the attP plasmid p1000 and the attB plasmid p5.1, in the presence of the int plasmid pIBH in E. coli HB101 showed that the int gene is active in trans in E. coli. The int gene product was detected as a 43 kDa protein in E. coli maxicells harbouring pINT. Proposed integration arm regions downstream of attP are not necessary for the integration process. pINT and phage ?CTX could be integrated together into P. aeruginosa chromosomal DNA, yielding double integrates.     

Extracellular recombinant protein production under continuous culture conditions with Escherichia coli using an alternative plasmid selection mechanism

The secretion of recombinant proteins into the extracellular space by Escherichia coli presents advantages like easier purification and protection from proteolytic degradation. The controlled co-expression of a bacteriocin release protein aids in moving periplasmic proteins through the outer membrane. Since such systems have rarely been applied in continuous culture it seemed to be attractive to study the interplay between growth-phase regulated promoters controlling release protein genes and the productivity of a chemostat process. To avoid the use of antibiotics and render this process more sustainable, alternative plasmid selection mechanisms were required. In the current study, the strain E. coli JM109 harboring plasmid p582 was shown to stably express and secrete recombinant β-glucanase in continuous culture using a minimal medium. The segregational instability of the plasmid in the absence of antibiotic selection pressure was demonstrated. The leuB gene, crucial in the leucine biosynthetic pathway, was cloned onto plasmid p582 and the new construct transformed into an E. coli Keio (ΔleuB) knockout strain. The ability of the construct to complement the leucine auxotrophy was initially tested in shake-flasks and batch cultivation. Later, this strain was successfully grown for more than 200 h in a chemostat and was found to be able to express the recombinant protein. Significantly, it showed a stable maintenance of the recombinant plasmid in the absence of any antibiotics. The plasmid stability in a continuously cultivated E. coli fermentation, in the absence of antibiotics, with extracellular secretion of recombinant protein provides an interesting model for further improvements.     

Acquisition by Escherichia coli of plasmid-borne beta-lactamases normally confined to Pseudomonas spp.

The β-lactamases determined by a number of Pseudomonas specific plasmids are quite distinct from the enzymes of the R factors of enteric bacteria (or by those freely transmissible between these groups). The genes determining these enzymes may be mobilized for transfer into Escherichia coli by a plasmid which transfers between the groups. In several cases the determinants have been incorporated into the mobilizing plasmid and we conclude that the Pseudomonas-specific plasmid was unable to replicate in E. coli; but in one case the determinant remains on a plasmid which replicates independently of the mobilizer, indicating that the limitation to Pseudomonas is a deficiency of intergeneric transferability. In all cases the β-lactamase genes function efficiently in the new host and the enzymes confer high levels of resistance to penicillins.     

Construction of recombinant mercury resistant Acidithiobacillus caldus

A mercury-resistant plasmid of pTMJ212 which was able to shuttle between Acidithiobacillus caldus and Escherichia coli was constructed by inserting the mercury resistant determinants, the mer operon of Acidithiobacillus ferrooxidans, into the IncQ plasmid of pJRD215. pTMJ212 was transferred from Escherichia coli into Acidithiobacillus caldus through conjugation. Furthermore, pTMJ212 was transferred back from Acidithiobacillus caldus into Escherichia coli, thereby confirming the initial transfer of pTMJ212 from Escherichia coli to Acidithiobacillus caldus. Compared to the control, the cell growth of the recombinant Acidithiobacillus caldus increased markedly under mercury (Hg²⁺) stress especially at Hg²⁺ concentrations ranging from 2.0 to 4.5 μg/ml.     

Conjugative plasmid transfer from <Emphasis Type="Italic">Escherichia coli</Emphasis> is a versatile approach for genetic transformation of thermophilic <Emphasis Type="Italic">Bacillus</Emphasis> and <Emphasis Type="Italic">Geobacillus</Emphasis> species

We previously demonstrated efficient transformation of the thermophile Geobacillus kaustophilus HTA426 using conjugative plasmid transfer from Escherichia coli BR408. To evaluate the versatility of this approach to thermophile transformation, this study examined genetic transformation of various thermophilic Bacillus and Geobacillus spp. using conjugative plasmid transfer from E. coli strains. E. coli BR408 successfully transferred the E. coli–Geobacillus shuttle plasmid pUCG18T to 16 of 18 thermophiles with transformation efficiencies between 4.1 × 10^?7 and 3.8 × 10^?2/recipient. Other E. coli strains that are different from E. coli BR408 in intracellular DNA methylation also generated transformants from 9 to 15 of the 18 thermophiles, including one that E. coli BR408 could not transform, although the transformation efficiencies of these strains were generally lower than those of E. coli BR408. The conjugation was performed by simple incubation of an E. coli donor and a thermophile recipient without optimization of experimental conditions. Moreover, thermophile transformants were distinguished from abundant E. coli donor only by high temperature incubation. These observations suggest that conjugative plasmid transfer, particularly using E. coli BR408, is a facile and versatile approach for plasmid introduction into thermophilic Bacillus and Geobacillus spp., and potentially a variety of other thermophiles.     

Plasmid pEC156, a Naturally Occurring Escherichia coli Genetic Element That Carries Genes of the EcoVIII Restriction-Modification System,Is Mobilizable among Enterobacteria

Type II restriction-modification systems are ubiquitous in prokaryotes. Some of them are present in naturally occurring plasmids, which may facilitate the spread of these systems in bacterial populations by horizontal gene transfer. However, little is known about the routes of their dissemination. As a model to study this, we have chosen an Escherichia coli natural plasmid pEC156 that carries the EcoVIII restriction modification system. The presence of this system as well as the cis-acting cer site involved in resolution of plasmid multimers determines the stable maintenance of pEC156 not only in Escherichia coli but also in other enterobacteria. We have shown that due to the presence of oriT-type F and oriT-type R64 loci it is possible to mobilize pEC156 by conjugative plasmids (F and R64, respectively). The highest mobilization frequency was observed when pEC156-derivatives were transferred between Escherichia coli strains, Enterobacter cloacae and Citrobacter freundii representing coliform bacteria. We found that a pEC156-derivative with a functional EcoVIII restriction-modification system was mobilized in enterobacteria at a frequency lower than a plasmid lacking this system. In addition, we found that bacteria that possess the EcoVIII restriction-modification system can efficiently release plasmid content to the environment. We have shown that E. coli cells can be naturally transformed with pEC156-derivatives, however, with low efficiency. The transformation protocol employed neither involved chemical agents (e.g. CaCl₂) nor temperature shift which could induce plasmid DNA uptake.     

Cefotaxime Resistant Escherichia coli Collected from a Healthy Volunteer; Characterisation and the Effect of Plasmid Loss

In this study 6 CTX-M positive E. coli isolates collected during a clinical study examining the effect of antibiotic use in a human trial were analysed. The aim of the study was to analyse these isolates and assess the effect of full or partial loss of plasmid genes on bacterial fitness and pathogenicity. A DNA array was utilised to assess resistance and virulence gene carriage. Plasmids were characterised by PCR-based replicon typing and addiction system multiplex PCR. A phenotypic array and insect virulence model were utilised to assess the effect of plasmid-loss in E. coli of a large multi-resistance plasmid. All six E. coli carrying bla _CTX-M-14 were detected from a single participant and were identical by pulse field gel electrophoresis and MLST. Plasmid profiling and arrays indicated absence of a large multi-drug resistance (MDR) F-replicon plasmid carrying blaTEM, aadA4, strA, strB, dfrA17/19, sul1, and tetB from one isolate. Although this isolate partially retained the plasmid it showed altered fitness characteristics e.g. inability to respire in presence of antiseptics, similar to a plasmid-cured strain. However, unlike the plasmid-cured or plasmid harbouring strains, the survival rate for Galleria mellonella infected by the former strain was approximately 5-times lower, indicating other possible changes accompanying partial plasmid loss. In conclusion, our results demonstrated that an apparently healthy individual can harbour bla _CTX-M-14 E. coli strains. In one such strain, isolated from the same individual, partial absence of a large MDR plasmid resulted in altered fitness and virulence characteristics, which may have implications in the ability of this strain to infect and any subsequent treatment.     

Plasmid Transfer into the Homoacetogen Acetobacterium woodii by Electroporation and Conjugation

Shuttle vectors (pMS3 and pMS4) which replicated in Escherichia coli and in gram-positive Acetobacterium woodii were constructed by ligating the replication origin of plasmid pAMβ1 with the E. coli cloning vector pUC19 and the tetM gene of streptococcal transposon Tn916. Electrotransformation of A. woodii was achieved at frequencies of 4.5 × 10³ transformants per μg of plasmid DNA. For conjugal plasmid transfer, the mobilizable shuttle vector pKV12 was constructed by cloning the tetM gene into pAT187. Mating of E. coli containing pKV12 with A. woodii resulted in transfer frequencies of 3 × 10^-6 to 7 × 10^-6 per donor or recipient.     

In Vivo Transmission of an IncA/C Plasmid in Escherichia coli Depends on Tetracycline Concentration,and Acquisition of the Plasmid Results in a Variable Cost of Fitness

IncA/C plasmids are broad-host-range plasmids enabling multidrug resistance that have emerged worldwide among bacterial pathogens of humans and animals. Although antibiotic usage is suspected to be a driving force in the emergence of such strains, few studies have examined the impact of different types of antibiotic administration on the selection of plasmid-containing multidrug resistant isolates. In this study, chlortetracycline treatment at different concentrations in pig feed was examined for its impact on selection and dissemination of an IncA/C plasmid introduced orally via a commensal Escherichia coli host. Continuous low-dose administration of chlortetracycline at 50 g per ton had no observable impact on the proportions of IncA/C plasmid-containing E. coli from pig feces over the course of 35 days. In contrast, high-dose administration of chlortetracycline at 350 g per ton significantly increased IncA/C plasmid-containing E. coli in pig feces (P < 0.001) and increased movement of the IncA/C plasmid to other indigenous E. coli hosts. There was no evidence of conjugal transfer of the IncA/C plasmid to bacterial species other than E. coli. In vitro competition assays demonstrated that bacterial host background substantially impacted the cost of IncA/C plasmid carriage in E. coli and Salmonella. In vitro transfer and selection experiments demonstrated that tetracycline at 32 μg/ml was necessary to enhance IncA/C plasmid conjugative transfer, while subinhibitory concentrations of tetracycline in vitro strongly selected for IncA/C plasmid-containing E. coli. Together, these experiments improve our knowledge on the impact of differing concentrations of tetracycline on the selection of IncA/C-type plasmids.     

Intracellular location of NRl-plasmid DNA inEscherichia coli minicells

Intracellular location of plasmid NR1 (M = 58 Mg/mol, stringent control of replication, 1–2 copies perEscherichia coli chromosomal equivalent) was studied and compared with that of plasmid R6KΔ1 (M = 21 Mg/mol, relaxed control of replication, 10–15 copies perE. coli chromosomal equivalent), both inE. coli minicells. Considerable difference in relative distribution of molecules of these two plasmid DNA’s between the cytoplasm and the membrane fraction was found when components of the corresponding minicell lyzates were fractionated by sedimentation in a double-linear gradient of caesium chlorid and sucrose. Also the difference in relative numbers of NR1 DNA and R6KΔ1 DNA molecules stably associated with the membrane of minicells, determined by electron-microscopic examination of the fractions containing plasmid DNA-membrane complexes, was evaluated as statistically significant. The association of NR1 DNA molecules withE. coli minicell membrane was found to be a much more frequent event than such association of R6KΔ1 molecules. The absolute amount of plasmid DNA associated with membrane in a single minicell corresponds to one molecule for both NR1 and R6KAΔ1.     

The gene for indole-3-acetyl-L-aspartic acid hydrolase from Enterobacter agglomerans : molecular cloning, nucleotide sequence, and expression in Escherichia coli

A 5.5-kb DNA fragment containing the indole-3-acetyl-aspartic acid (IAA-asp) hydrolase gene (iaaspH) was isolated from Enterobacter agglomerans strain GK12 using a hybridization probe based on the N-terminal amino acid sequence of the protein. The DNA sequence of a 2.4-kb region of this fragment was determined and revealed a 1311-nucleotide ORF large enough to encode the 45-kDa IAA-asp hydrolase. A 1.5-kb DNA fragment containing iaaspH was subcloned into the Escherichia coli expression plasmid pTTQ8 to yield plasmid pJCC2. Extracts of IPTG-induced E. coli cultures containing the pJCC2 recombinant plasmid showed IAA-asp hydrolase levels 5 to 10-fold higher than those in E. agglomerans extracts. Homology searches revealed that the IAA-asp hydrolase was similar to a variety of amidohydrolases. In addition, IAA-asp hydrolase showed 70% sequence identity to a putative thermostable carboxypeptidase of E. coli.     

Two Rep Genes in Small Cryptic Plasmid pKST21 of Escherichia coli

The complete nucleotide sequence of a small cryptic plasmid pKST21 from Escherichia coli was determined. This plasmid is 1,460 bp long with an overall GC content of 51 %. Based on sequence analysis, the presence of two segments with different average GC density was observed. The segment with higher GC content revealed 98–90 % similarity to several small plasmids of E. coli and to pCR1 from Gram-positive Corynebacterium renale. Plasmid pKST21 possesses two conversely oriented open reading frames encoding proteins with a high degree of amino acid identity to Rep proteins involved in replication. ORF1 encodes replication protein similar to RepA protein of Bartonella tribocorum or Bacillus cereus plasmids or to the putative plasmid Rep protein from ecologically close Selenomonas ruminantium. ORF2 similarly encodes a replication protein, which shares 97 % homology with Rep protein from C. renale. Genetic diversity observed in plasmid pKST21 indicates a mosaic structure of the plasmid with different segments acquired from different sources. Deletion analysis showed that both fragments carrying the repA and repB genes are necessary for the replication of pKST21 in E. coli. The presence of plasmid with the same gene composition was revealed in 14 % of tested E. coli isolates from the rumen of sheep. All these strains produced identical ERIC-PCR profiles indicating isogenic origin of the strain and lack of horizontal gene transfer of pKST21 plasmid.     

Metabolic Engineering of Escherichia coli for Production of Enantiomerically Pure (R)-(−)-Hydroxycarboxylic Acids

A heterologous metabolism of polyhydroxyalkanoate (PHA) biosynthesis and degradation was established in Escherichia coli by introducing the Ralstonia eutropha PHA biosynthesis operon along with the R. eutropha intracellular PHA depolymerase gene. By with this metabolically engineered E. coli, enantiomerically pure (R)-3-hydroxybutyric acid (R3HB) could be efficiently produced from glucose. By employing a two-plasmid system, developed as the PHA biosynthesis operon on a medium-copy-number plasmid and the PHA depolymerase gene on a high-copy-number plasmid, R3HB could be produced with a yield of 49.5% (85.6% of the maximum theoretical yield) from glucose. By integration of the PHA biosynthesis genes into the chromosome of E. coli and by introducing a plasmid containing the PHA depolymerase gene, R3HB could be produced without plasmid instability in the absence of antibiotics. This strategy can be used for the production of various enantiomerically pure (R)-hydroxycarboxylic acids from renewable resources.     

A new idea for simple and rapid monitoring of gene expression: requirement of nucleotide sequences encoding an N-terminal HA tag in the T7 promoter-driven expression in E. coli

Mammalian expression vectors are used to overexpress genes of interest in mammalian cells. High temperature requirement protein A1 (HtrA1), used as a specific target, was expressed from the pHA-M-HtrA1 plasmid in HEK293T cells, inducing cell death. Expression of HtrA1 was driven by the pHA-M-HtrA1 mammalian expression vector in E. coli resulting in growth suppression of E. coli in an HtrA1 serine protease-dependent manner. By using various combinations of promoters, target genes and N-terminal tags, the T7 promoter and N-terminal HA tag in the mammalian expression vector were shown to be responsible for expression of target genes in E. coli. Thus the pHA-M-HtrA1 plasmid can be used as a novel, rapid pre-test system for expression and cytotoxicity of the specific target gene in E. coli before assessing its functions in mammalian cells.