Classification of phytoplankton cells as live or dead using the vital stains fluorescein diacetate and 5‐chloromethylfluorescein diacetate

Regulations for ballast water treatment specify limits on the concentrations of living cells in discharge water. The vital stains fluorescein diacetate (FDA) and 5‐chloromethylfluorescein diacetate (CMFDA) in combination have been recommended for use in verification of ballast water treatment technology. We tested the effectiveness of FDA and CMFDA, singly and in combination, in discriminating between living and heat‐killed populations of 24 species of phytoplankton from seven divisions, verifying with quantitative growth assays that uniformly live and dead populations were compared. The diagnostic signal, per‐cell fluorescence intensity, was measured by flow cytometry and alternate discriminatory thresholds were defined statistically from the frequency distributions of the dead or living cells. Species were clustered by staining patterns: for four species, the staining of live versus dead cells was distinct, and live‐dead classification was essentially error free. But overlap between the frequency distributions of living and heat‐killed cells in the other taxa led to unavoidable errors, well in excess of 20% in many. In 4 very weakly staining taxa, the mean fluorescence intensity in the heat‐killed cells was higher than that of the living cells, which is inconsistent with the assumptions of the method. Applying the criteria of ≤5% false negative plus ≤5% false positive errors, and no significant loss of cells due to staining, FDA and FDA+CMFDA gave acceptably accurate results for only 8–10 of 24 species (i.e., 33%–42%). CMFDA was the least effective stain and its addition to FDA did not improve the performance of FDA alone.     

Microfluidic device‐assisted etching of p‐HEMA for cell or protein patterning

The construction of biomaterials with which to limit the growth of cells or to limit the adsorption of proteins is essential for understanding biological phenomena. Here, we describe a novel method to simply and easily create thin layers of poly (2‐hydroxyethyl methacrylate) (p‐HEMA) for protein and cellular patterning via etching with ethanol and microfluidic devices. First, a cell culture surface or glass coverslip is coated with p‐HEMA. Next, a polydimethylsiloxane (PDMS) microfluidic is placed onto the p‐HEMA surface, and ethanol is aspirated through the device. The PDMS device is removed, and the p‐HEMA surface is ready for protein adsorption or cell plating. This method allows for the fabrication of 0.3 µm thin layers of p‐HEMA, which can be etched to 10 µm wide channels. Furthermore, it creates regions of differential protein adhesion, as shown by Coomassie staining and fluorescent labeling, and cell adhesion, as demonstrated by C2C12 myoblast growth. This method is simple, versatile, and allows biologists and bioengineers to manipulate regions for cell culture adhesion and growth. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 34:243–248, 2018     

Grafting of antibacterial polymers on stainless steel via surface‐initiated atom transfer radical polymerization for inhibiting biocorrosion by Desulfovibrio desulfuricans

To enhance the biocorrosion resistance of stainless steel (SS) and to impart its surface with bactericidal function for inhibiting bacterial adhesion and biofilm formation, well‐defined functional polymer brushes were grafted via surface‐initiated atom transfer radical polymerization (ATRP) from SS substrates. The trichlorosilane coupling agent, containing the alkyl halide ATRP initiator, was first immobilized on the hydroxylated SS (SS‐OH) substrates for surface‐initiated ATRP of (2‐dimethylamino)ethyl methacrylate (DMAEMA). The tertiary amino groups of covalently immobilized DMAEMA polymer or P(DMAEMA), brushes on the SS substrates were quaternized with benzyl halide to produce the biocidal functionality. Alternatively, covalent coupling of viologen moieties to the tertiary amino groups of P(DMAEMA) brushes on the SS surface resulted in an increase in surface concentration of quaternary ammonium groups, accompanied by substantially enhanced antibacterial and anticorrosion capabilities against Desulfovibrio desulfuricans in anaerobic seawater, as revealed by antibacterial assay and electrochemical studies. With the inherent advantages of high corrosion resistance of SS, and the good antibacterial and anticorrosion capabilities of the viologen‐quaternized P(DMAEMA) brushes, the functionalized SS is potentially useful in harsh seawater environments and for desalination plants. Biotechnol. Bioeng. 2009;103: 268–281. © 2009 Wiley Periodicals, Inc.     

Preparation of Ag/Au bimetallic nanostructures and their application in surface‐enhanced fluorescence

An effective substrate for surface‐enhanced fluorescence, which consists of cluster Ag/Au bimetallic nanostructures on a copper surface, was synthesized via a multi‐stage galvanic replacement reaction of a Ag cluster in a chlorauric acid (HAuCl₄) solution at room temperature. The fabricated silver/gold bimetallic cluster were found to yield large surface‐enhanced fluorescence (SEF) enhancement factors for rhodamine 6G probe molecules deposited on the substrate, and also the fluorescence efficiency is critically dependent on the period of nanostructure growth. With the help of proper control reaction conditions, such as the reaction time, and concentration of reaction solutions, the maximum fluorescence enhanced effect was obtained. Therefore, the bimetallic nanostructure substrate also can be adapted to studies in SEF, which will expand the application of SEF. Copyright © 2015 John Wiley & Sons, Ltd.     

Sperm status and DNA dose play key roles in sperm/ICSI‐mediated gene transfer in caprine

In relation to the growing recent interest in the establishment of sperm‐mediated gene transfer (SMGT) technology as a convenient and effective method for the simple production of transgenic animals, in this study the possibility of using SMGT to produce transgenic caprine embryos was investigated for the first time. Buck sperm were directly incubated with different concentrations (0–500 ng) of pcDNA/his/Lac‐Z plasmid and used for IVF or ICSI. Sperm used for ICSI were categorized into motile or live‐immotile group before being injected into oocytes. In a separate experiment, dead sperm prepared by repeated freezing/thawing were used for DNA‐incubation before ICSI. Sham injection was carried out by intracytoplasmic injection of approximately the same volume of media containing different doses of DNA using an ICSI needle. Transgene expression and transmission were detected by X‐Gal staining and PCR analysis of developed embryos, respectively. A reasonable blastocyst rate was observed in all the groups. Only embryos in the sham group were negative for transgene transmission. Transgene expression was completely dependent on the delivery technique and status of sperm, and was only observed in the live‐immotile and dead ICSI groups. The results of this study showed that the technique (IVF vs. ICSI vs. sham injection), sperm status (motile vs. live‐immotile vs. dead) and to some extent DNA concentration affect embryo development, transgene transmission and expression. Mol. Reprod. Dev. 77:868–875, 2010. © 2010 Wiley‐Liss, Inc.     

Biocidal and anti‐corrosive activities of benzoimidazol‐3‐ium cationic Schiff base surfactants

Two series of cationic Schiff base surfactants, namely, 2‐(benzylideneamino)‐3‐(2‐oxo‐2‐alkoxyethyl)‐1,3‐benzoimidazol‐3‐ium bromide (I _A–D ) and 2‐[(4‐methoxybenzylidene) amino]‐3‐(2‐oxo‐2‐alkoxyethyl)‐1,3‐benzoimidazol‐3‐ium bromide (II _A–D ) were prepared. The chemical structures of the prepared Schiff bases were recognized by elemental analysis, FTIR, H NMR, C¹³‐NMR and GC/MS spectra. The surface activities of the synthesized Schiff base cationic surfactants showed their tendency towards adsorption at the air/water interface. The adsorption tendency was estimated from the values of surface tension and the depression of surface tension at the critical micelle concentration. The studied surfactants were evaluated as antimicrobial agents against pathogenic and sulfur‐reducing bacteria using inhibition zone diameters and minimum inhibition concentration values. The synthesized cationic benzoimidazolium Schiff base cationic surfactants showed good antimicrobial activities against the tested microorganisms including Gram positive, Gram negative as well as fungi. The synthesized compounds were tested for the activity as corrosion inhibitors against carbon steel corrosion in 0.5 M HCl at 200 and 400 ppm. The promising inhibition efficiency of these compounds against the sulfur‐reducing bacteria facilitates them to be applicable in the petroleum field as new categories of Sulfur Reducing Bacteria biocides. The inhibition efficiencies of the tested compounds showed good inhibition and protection of the carbon steel. The corrosion inhibition tendency correlated to the surface activity and chemical structure of the compounds.     

Near‐neutral surface charge and hydrophilicity prevent mineral encrustation of Fe‐oxidizing micro‐organisms

Microbial survival in mineralizing environments depends on the ability to evade surface encrustation by minerals, which could obstruct nutrient uptake and waste output. Some organisms localize mineral precipitation away from the cell; however, cell surface properties – charge and hydrophobicity – must also play a role in preventing surface mineralization. This is especially relevant for iron‐oxidizing bacteria (FeOB), which face an encrustation threat from both biotic and abiotic mineralization. We used electron microscopy and surface characterization techniques to study the surfaces of two stalk‐forming neutrophilic FeOB: the marine Zetaproteobacterium Mariprofundus ferrooxydans PV‐1 and the recently isolated freshwater Betaproteobacterium Gallionellales strain R‐1. Both organisms lack detectable iron on cell surfaces. Live and azide‐inhibited M. ferrooxydans PV‐1 cells had small negative zeta potentials (?0.34 to ?2.73 mV), over the pH range 4.2–9.4; Gallionellales strain R‐1 cells exhibited an even smaller zeta potential (?0.10 to ?0.19 mV) over pH 4.2–8.8. Cells have hydrophilic surfaces, according to water contact angle measurements and microbial adhesion to hydrocarbons tests. Thermodynamic and extended Derjaguin–Landau–Verwey–Overbeek (XDLVO) calculations showed that as low charge causes low electrostatic attraction, hydrophilic repulsion dominates cell–mineral interactions. Therefore, we conclude that surface properties help enable these FeOB to survive in highly mineralizing environments. Given both mineral‐repelling surface properties and the ability to sequester Fe(III) biominerals in an organomineral stalk, these two FeOB have a well‐coordinated system to localize both biotic and abiotic mineral distribution.     

Directed self‐immobilization of alkaline phosphatase on micro‐patterned substrates via genetically fused metal‐binding peptide

Current biotechnological applications such as biosensors, protein arrays, and microchips require oriented immobilization of enzymes. The characteristics of recognition, self‐assembly and ease of genetic manipulation make inorganic binding peptides an ideal molecular tool for site‐specific enzyme immobilization. Herein, we demonstrate the utilization of gold binding peptide (GBP1) as a molecular linker genetically fused to alkaline phosphatase (AP) and immobilized on gold substrate. Multiple tandem repeats (n = 5, 6, 7, 9) of gold binding peptide were fused to N‐terminus of AP (nGBP1‐AP) and the enzymes were expressed in E. coli cells. The binding and enzymatic activities of the bi‐functional fusion constructs were analyzed using quartz crystal microbalance spectroscopy and biochemical assays. Among the multiple‐repeat constructs, 5GBP1‐AP displayed the best bi‐functional activity and, therefore, was chosen for self‐immobilization studies. Adsorption and assembly properties of the fusion enzyme, 5GBP1‐AP, were studied via surface plasmon resonance spectroscopy and atomic force microscopy. We demonstrated self‐immobilization of the bi‐functional enzyme on micro‐patterned substrates where genetically linked 5GBP1‐AP displayed higher enzymatic activity per area compared to that of AP. Our results demonstrate the promising use of inorganic binding peptides as site‐specific molecular linkers for oriented enzyme immobilization with retained activity. Directed assembly of proteins on solids using genetically fused specific inorganic‐binding peptides has a potential utility in a wide range of biosensing and bioconversion processes. Biotechnol. Bioeng. 2009;103: 696–705. © 2009 Wiley Periodicals, Inc.     

A general and efficient cantilever functionalization technique for AFM molecular recognition studies

Atomic force microscopy (AFM) is a versatile technique for the investigation of noncovalent molecular associations between ligand–substrate pairs. Surface modification of silicon nitride AFM cantilevers is most commonly achieved using organic trialkoxysilanes. However, susceptibility of the Si? O bond to hydrolysis and formation of polymeric aggregates diminishes attractiveness of this method for AFM studies. Attachment techniques that facilitate immobilization of a wide variety of organic and biological molecules via the stable Si? C bond on silicon nitride cantilevers would be of great value to the field of molecular recognition force spectroscopy. Here, we report (1) the formation of stable, highly oriented monolayers on the tip of silicon nitride cantilevers and (2) demonstrate their utility in the investigation of noncovalent protein–ligand interactions using molecular recognition force spectroscopy. The monolayers are formed through hydrosilylation of hydrogen‐terminated silicon nitride AFM probes using a protected α‐amino‐ω‐alkene. This approach facilitates the subsequent conjugation of biomolecules. The resulting biomolecules are bound to the tip by a strong Si? C bond, completely uniform with regard to both epitope density and substrate orientation, and highly suitable for force microscopy studies. We show that this attachment technique can be used to measure the unbinding profiles of tip‐immobilized lactose and surface‐immobilized galectin‐3. Overall, the proposed technique is general, operationally simple, and can be expanded to anchor a wide variety of epitopes to a silicon nitride cantilever using a stable Si? C bond. © 2012 Wiley Periodicals, Inc. Biopolymers 97: 761–765, 2012.     

Lipase‐Catalyzed Kinetic Resolution of (±)‐1‐(2‐Furyl) Ethanol in Nonaqueous Media

S‐1‐(2‐Furyl) ethanol serves as an important chiral building block for the preparation of various natural products, fine chemicals, and is widely used in the chemical and pharmaceutical industries. In this work, lipase‐catalyzed kinetic resolution of (R/S)‐1‐(2‐furyl) ethanol using different acyl donors was investigated. Vinyl esters are good acyl donors vis‐à‐vis alkyl esters for kinetic resolution. Among them, vinyl acetate was found to be the best acyl donor. Different immobilized lipases such as Rhizomucor miehei lipase, Thermomyces lanuginosus lipase, and Candida antarctica lipase B were evaluated for this reaction, among which C. antarctica lipase B, immobilized on acrylic resin (Novozym 435), was found to be the best catalyst in n‐heptane as solvent. The effect of various parameters was studied in a systematic manner. Maximum conversion of 47% and enantiomeric excess of the substrate (ee_s) of 89% were obtained in 2 h using 5 mg of enzyme loading with an equimolar ratio of alcohol to vinyl acetate at 60°C at a speed of 300 rpm in a batch reactor. From the analysis of progress curve and initial rate data, it was concluded that the reaction followed the ordered bi–bi mechanism with dead‐end ester inhibition. Kinetic parameters were obtained by using nonlinear regression. This process is more economical, green, and easily scalable than the chemical processes. Chirality 26:286–292, 2014. © 2014 Wiley Periodicals, Inc.     

Antimicrobial surfaces of viologen-quaternized poly((2-dimethyl amino)ethyl methacrylate)-Si(100) hybrids from surface-initiated atom transfer radical polymerization

To improve the antimicrobial ability of silicon-based bioelectronics and to tailor the silicon surfaces for inhibiting biofilm formation, well-defined functional polymer-Si(100) hybrids, consisting of nearly monodispersed poly((2-dimethylamino)ethyl methacrylate) (P(DMAEMA)) covalently tethered on the silicon surface and functionalized by viologen moieties, were prepared. P(DMAEMA)-Si hybrids were prepared via surface-initiated atom transfer radical polymerization (ATRP) of (2-dimethylamino)ethyl methacrylate (DMAEMA) on the hydrogen-terminated Si(100) surfaces (Si−H surfaces). The tertiary amino groups of the covalently immobilized (Si−C bonded) P(DMAEMA) brushes on the silicon substrates were quaternized by an alkyl halide to produce a high concentration of quaternary ammonium groups with biocidal functionality. Alternatively, covalent coupling of viologen moieties to the tertiary amino groups of P(DMAEMA) brushes produced the quaternized P(DMAEMA)-Si(100) hybrids with substantially enhanced antimicrobial capability, as well as capability to effectively inhibit biofilm formation. Thus, the viologen-quaternized P(DMAEMA)-Si(100) hybrids possess good antibacterial surface properties and are potentially useful to the silicon-based bioelectronics to ensure their efficiency, durability and reliability.     

High Efficiency (>17%) Si‐Organic Hybrid Solar Cells by Simultaneous Structural,Electrical, and Interfacial Engineering via Low‐Temperature Processes

Highly efficient organic–inorganic hybrid solar cells of Si‐poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) have been demonstrated by simultaneous structural, electrical, and interfacial engineering with low processing temperature. Si substrate has been sculpted into hierarchical structure to reduce light reflection loss and increase interfacial junction area at the same time. Regarding the electrical optimization, highly conductive organic PEDOT:PSS layer has been formulated with low sheet resistance. It is argued that the sheet resistance, rather than conductivity, is the primary parameter for the high efficiency hybrid cells, which leads to the optimization of thickness, i.e., thick enough to have low sheet resistance but transparent enough to pass the incident sunlight. Finally, siloxane oligomers have been inserted into top/bottom interfaces by contact‐printing at room ambient, which suppresses carrier recombination at interfaces and reduces contact resistance at bottom electrode. Contrary to high‐temperature doping (for the formation of front surface or back surface fields), wet solution processes or vacuum‐based deposition, the contact‐printing can be done at room ambient to reduce carrier recombination at the interfaces. The high efficiency obtained with low processing temperature can make this type of cells be a possible candidate for post‐Si photovoltaics.     

Cytotoxic and apoptotic effects of chalcone derivatives of 2‐acetyl thiophene on human colon adenocarcinoma cells

Recent studies report that chalcones exhibit cytotoxicity to human cancer cell lines. Typically, the form of cell death induced by these compounds is apoptosis. In the context of the discovery of new anticancer agents and in light of the antitumour potential of several chalcone derivatives, in the present study, we synthesized and tested the cytotoxicity of six chalcone derivatives on human colon adenocarcinoma cells. Six derivatives of 3‐phenyl‐1‐(thiophen‐2‐yl) prop‐2‐en‐1‐one were prepared and characterized on the basis of their ¹H and ¹³C NMR spectra. HT‐29 cells were treated with synthesized chalcones on two concentrations by three different incubation times. Cells were evaluated by cell morphology, Tetrazolium dye (MTT) colorimetric assay, live/dead, flow cytometry (annexin V) and gene expression analyses to determine the cytotoxic way. Chalcones 3‐(4‐bromophenyl)‐1‐(thiophen‐2‐yl)prop‐2‐en‐1‐one (C06) and 3‐(2‐nitrophenyl)‐1‐(thiophen‐2‐yl)prop‐2‐en‐1‐one (C09) demonstrated higher cytotoxicity than other chalcones as shown by cell morphology, live/dead and MTT assays. In addition, C06 induced apoptosis on flow cytometry annexin V assay. These data were confirmed by a decreased expression of anti‐apoptotic genes and increased pro‐apoptotic genes. Our findings indicate in summary that the cytotoxic activity of chalcone C06 on colorectal carcinoma cells occurs by apoptosis. Copyright © 2012 John Wiley & Sons, Ltd.     

Growth and characterization of Escherichia coli DH5α biofilm on concrete surfaces as a protective layer against microbiologically influenced concrete deterioration (MICD)

Biofilms of selected bacteria strains were previously used on metal coupons as a protective layer against microbiologically influenced corrosion of metals. Unlike metal surfaces, concrete surfaces present a hostile environment for growing a protective biofilm. The main objective of this research was to investigate whether a beneficial biofilm can be successfully grown on mortar surfaces. Escherichia coli DH5α biofilm was grown on mortar surfaces for 8 days, and the structure and characteristics of the biofilm were studied using advanced microscopy techniques such as scanning electron microscopy and confocal laser scanning microscopy in combination with fluorescence in situ hybridization, live/dead, extracellular polymer staining, ATP analysis, and membrane filtration. A biofilm layer with a varying thickness of 20–40 μm was observed on the mortar surface. The distribution of live and dead bacteria and extracellular polymers varied with depth. The density of the live population near the mortar surface was the lowest. The bacteria reached their highest density at three fourths of the biofilm depth and then decreased again near the biofilm–liquid interface. Overall, the results indicated a healthy biofilm growth in the chosen growth period of 8 days, and it is expected that longer growth periods would lead to formation of a more resistant biofilm with more coverage of mortar surfaces.     

Application of Exchangeable Biochemical Reactors with Oxidase‐Catalase‐Co‐immobilizates and Immobilized Microorganisms in a Microfluidic Chip‐Calorimeter

Several methods for the quantitative detection of different compounds, e.g., L‐amino acids, sugars or alcohols in liquid media were developed by application of an automatic measuring unit including a fluid chip‐calorimeter FCC‐21. For this purpose, enzymes were immobilized covalently on the inner and outer surface of CPG (controlled porous glass)‐spherules with an outer diameter of 100 μm and filled into a micro flow‐through reaction chamber (V_R = 20 μL). The design of the measuring cell allows for easy insertion into the calorimeter device of a stored series of comfortably pre‐fabricated measuring cells. These cells can be filled with different enzyme immobilizates. Different oxidases were used and co‐immobilized with catalase for the improvement of the detection sensitivity. A signal amplification could be achieved up to a factor of 3.5 with this configuration. β‐D‐glucose, ethanol and L‐lysine could be detected in a range of 0.25–1.75 mM using glucose oxidase, alcohol oxidase and lysine oxidase. The group of oxidases in combination with the enzymatic catalysis of the intermediate H₂O₂ allows the quantitative detection of a large number of analytes. A good measurement and storage stability could be achieved for several weeks by this immobilization method. In addition to enzyme‐based detection reactions, it was shown that living microorganisms can be immobilized in the reaction chamber. Thus, the system can be used as a whole‐cell biosensor. The quantitative detection of phenol in the range of 10–100 μM could be performed using the actinomycete Rhodococcus sp. immobilized on glass beads by means of embedding into polymers.     

Rearrangement of the F-actin cytoskeleton in estradiol-treated MCF-7 breast carcinoma cells

In response to treatment with 17β-estradiol, MCF-7 human breast carcinoma cells undergo a marked rearrangement of the F-actin cytoskeleton. The most conspicuous aspect of this rearrangement is the formation of an extensive array of lamellipodial structures which are situated beneath cell clusters. Treatment of cells with 17β-estradiol in the presence of the anti-estrogen ICI182,780 suppressed the development of the lamellipodial structures, indicating that this cytoskeletal rearrangement is mediated by the estrogen receptor. Time-lapse, video-enhanced, differential interference contrast microscopy reveals that the lamellipodial structures are actively motile beneath cell clusters. Furthermore, the lamellipodial structures form few focal contacts with the underlying substrate of the coverslip, as evidenced by either interference reflection microscopy or staining for the focal contact protein talin, indicating that these structures are not strongly adhered to the substratum. Immunofluorescence localization of E-cadherin indicates that this cell–cell adhesion receptor is present within these structures as either adhesion plaque- or point contact-like depositions. These findings implicate the cadherin-based cell–cell adhesion system in supporting tumor cell motility over adjacent cell surfaces via discrete adhesive structures which are associated with motile lamellipodia. Accepted: 1 September 1999     

Ambulacral growth allometry in edrioasteroids: functional surface‐volume change in ontogeny and phylogeny

McKinney, M. L. & Sumrall, C. D. 2010: Ambulacral growth allometry in edrioasteroids: functional surface‐volume change in ontogeny and phylogeny. Lethaia, Vol. 44, pp. 102–108. Most organisms do not maintain geometric similarity as they grow, in large part because of surface‐volume interactions. Because respiratory and food‐acquiring organs are dependent on surface area, which increases more slowly than volume, organisms have evolved many strategies to increase the efficiency of, and/or the functional surface areas of these organs. Here, we report some preliminary results comparing area of the feeding apparatus (ambulacra) versus the volume of the theca for a suite of isorophid edrioasteroid species at various ontogenetic sizes. Regression of log (ambulacral area) on log (thecal volume) indicates a strongly constrained allometric pattern whereby the ontogenies of all measured species fall on or near the same line (r² = 0.962, n = 55), with a slope (k) = 0.654 (± 0.018). This slope and associated 0.05 standard error (0.618–0.690) is within the bounds of that expected from increasing surface area to keep pace with the metabolic demands of increasing thecal size. This allometric value is also comparable to the size scaling of metabolism and respiratory and feeding surfaces in many living and a few fossil invertebrates (k ～ 0.5–0.9). The edrioasteroid species analysed show a very wide variety of changes in ambulacral length, width and sinuosity, documenting many different patterns for achieving the same goal of increasing surface area to keep pace with volume increase. There is no evidence of increasing feeding efficiency. □Edrioasteroid, allometry, ambulacrum, surface‐volume, echinoderm.     

Altering textural properties of fermented milk by using surface‐engineered Lactococcus lactis

Lactic acid bacteria are widely used for the fermentation of dairy products. While bacterial acidification rates, proteolytic activity and the production of exopolysaccharides are known to influence textural properties of fermented milk products, little is known about the role of the microbial surface on microbe–matrix interactions in dairy products. To investigate how alterations of the bacterial cell surface affect fermented milk properties, 25 isogenic Lactococcus lactis strains that differed with respect to surface charge, hydrophobicity, cell chaining, cell‐clumping, attachment to milk proteins, pili expression and EPS production were used to produce fermented milk. We show that overexpression of pili increases surface hydrophobicity of various strains from 3–19% to 94–99%. A profound effect of different cell surface properties was an altered spatial distribution of the cells in the fermented product. Aggregated cells tightly fill the cavities of the protein matrix, while chaining cells seem to be localized randomly. A positive correlation was found between pili overexpression and viscosity and gel hardness of fermented milk. Gel hardness also positively correlated with clumping of cells in the fermented milk. Viscosity of fermented milk was also higher when it was produced with cells with a chaining phenotype or with cells that overexpress exopolysaccharides. Our results show that alteration of cell surface morphology affects textural parameters of fermented milk and cell localization in the product. This is indicative of a cell surface‐dependent potential of bacterial cells as structure elements in fermented foods.     

Enhancement of the antimicrobial properties of bacteriophage‐K via stabilization using oil‐in‐water nano‐emulsions

Bacteriophage therapy is a promising new treatment that may help overcome the threat posed by antibiotic‐resistant pathogenic bacteria, which are increasingly identified in hospitalized patients. The development of biocompatible and sustainable vehicles for incorporation of viable bacterial viruses into a wound dressing is a promising alternative. This article evaluates the antimicrobial efficacy of Bacteriophage K against Staphylococcus aureus over time, when stabilized and delivered via an oil‐in‐water nano‐emulsion. Nano‐emulsions were formulated via thermal phase inversion emulsification, and then bacterial growth was challenged with either native emulsion, or emulsion combined with Bacteriophage K. Bacteriophage infectivity, and the influence of storage time of the preparation, were assessed by turbidity measurements of bacterial samples. Newly prepared Bacteriophage K/nano‐emulsion formulations have greater antimicrobial activity than freely suspended bacteriophage. The phage‐loaded emulsions caused rapid and complete bacterial death of three different strains of S. aureus. The same effect was observed for preparations that were either stored at room temperature (18–20°C), or chilled at 4°C, for up to 10 days of storage. A response surface design of experiments was used to gain insight on the relative effects of the emulsion formulation on bacterial growth and phage lytic activity. More diluted emulsions had a less significant effect on bacterial growth, and diluted bacteriophage‐emulsion preparations yielded greater antibacterial activity. The enhancement of bacteriophage activity when delivered via nano‐emulsions is yet to be reported. This prompts further investigation into the use of these formulations for the development of novel anti‐microbial wound management strategies. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:932–944, 2014     

Effects of silicate resupply to silicate‐deprived Thalassiosira weissflogii (Bacillariophyceae) in stationary or senescent phase: short‐term patterns of growth and cell death

The ability of nutrient‐deprived phytoplankton to recover in the short term when nutrients are resupplied has been studied for nitrogen and phosphorus, but the case for silicate (Si) is poorly understood. Si‐limited Thalassiosira weissflogii (Grunow) Fryxell et Hasle (grown in batch culture) was harvested in stationary phase (when cell numbers stopped increasing ~2 d after Si depletion) and senescence (when cell numbers declined ~4 d after Si depletion) and Si was resupplied at different concentrations (from 0 to 100 μM). Cell numbers, proportion of dead cells, variable fluorescence emissions (F_v/F_m), and activities of proteases were measured during Si depletion and for 24 h after Si resupply. As Si was depleted, the specific growth rate declined, dead cells increased from ~2% in log phase, to ~25% in stationary phase to over 35% in senescence, and activities of proteases associated with cell death increased several‐fold. Concentration‐dependent recovery of growth rate was seen after 24 h for cultures resupplied with Si in stationary phase but not in senescence. However, resupply of Si at 100 μM to stationary phase cultures alone increased protease activity to nearly the levels seen in senescence. Differences in the responses to Si resupply suggest that the ability and time to recover from Si depletion depend not only on the growth phase but also on the concentration resupplied.