Evaluation of Physical and Mechanical Properties of Porous Poly (Ethylene Glycol)-co-(L-Lactic Acid) Hydrogels during Degradation

Porous hydrogels of poly(ethylene glycol) (PEG) have been shown to facilitate vascularized tissue formation. However, PEG hydrogels exhibit limited degradation under physiological conditions which hinders their ultimate applicability for tissue engineering therapies. Introduction of poly(_L-lactic acid) (PLLA) chains into the PEG backbone results in copolymers that exhibit degradation via hydrolysis that can be controlled, in part, by the copolymer conditions. In this study, porous, PEG-PLLA hydrogels were generated by solvent casting/particulate leaching and photopolymerization. The influence of polymer conditions on hydrogel architecture, degradation and mechanical properties was investigated. Autofluorescence exhibited by the hydrogels allowed for three-dimensional, non-destructive monitoring of hydrogel structure under fully swelled conditions. The initial pore size depended on particulate size but not polymer concentration, while degradation time was dependent on polymer concentration. Compressive modulus was a function of polymer concentration and decreased as the hydrogels degraded. Interestingly, pore size did not vary during degradation contrary to what has been observed in other polymer systems. These results provide a technique for generating porous, degradable PEG-PLLA hydrogels and insight into how the degradation, structure, and mechanical properties depend on synthesis conditions.     

Development of macroporous poly(ethylene glycol) hydrogel arrays within microfluidic channels

The mass transport of solutes through hydrogels is an important design consideration in materials used for tissue engineering, drug delivery, and protein arrays used to quantify protein concentration and activity. We investigated the use of poly(ethylene glycol) (PEG) as a porogen to enhance diffusion of macromolecules into the interior of polyacrylamide and PEG hydrogel posts photopatterned within microfluidic channels. The diffusion of GST-GFP and dextran-FITC into hydrogels was monitored and effective diffusion coefficients were determined by fitting to the Fickian diffusion equations. PEG-diacrylate (M(r) 700) with porogen formed a macroporous structure and permitted significant penetration of 250 kDa dextran. Proteins copolymerized in these macroporous hydrogels retained activity and were more accessible to antibody binding than proteins copolymerized in nonporous gels. These results suggest that hydrogel macroporosity can be tuned to regulate macromolecular transport in applications such as tissue engineering and protein arrays.     

Characterization of photo-cross-linked oligo[poly(ethylene glycol) fumarate] hydrogels for cartilage tissue engineering

Photo-cross-linkable oligo[poly(ethylene glycol) fumarate] (OPF) hydrogels have been developed for use in tissue engineering applications. We demonstrated that compressive modulus of these hydrogels increased with increasing polymer concentration, and hydrogels with different mechanical properties were formed by altering the ratio of cross-linker/polymer in precursor solution. Conversely, swelling of hydrogels decreased with increasing polymer concentration and cross-linker/polymer ratio. These hydrogels are degradable and degradation rates vary with the change in cross-linking level. Chondrocyte attachment was quantified as a method for evaluating adhesion of cells to the hydrogels. These data revealed that cross-linking density affects cell behavior on the hydrogel surfaces. Cell attachment was greater on the samples with increased cross-linking density. Chondrocytes on these samples exhibited spread morphology with distinct actin stress fibers, whereas they maintained their rounded morphology on the samples with lower cross-linking density. Moreover, chondrocytes were photoencapsulated within various hydrogel networks. Our results revealed that cells encapsulated within 2-mm thick OPF hydrogel disks remained viable throughout the 3-week culture period, with no difference in viability across the thickness of hydrogels. Photoencapsulated chondrocytes expressed the mRNA of type II collagen and produced cartilaginous matrix within the hydrogel constructs after three weeks. These findings suggest that photo-cross-linkable OPF hydrogels may be useful for cartilage tissue engineering and cell delivery applications.     

Polysaccharide-poly(ethylene glycol) star copolymer as a scaffold for the production of bioactive hydrogels

The production of polysaccharide-derivatized surfaces, polymers, and biomaterials has been shown to be a useful strategy for mediating the biological properties of materials, owing to the importance of polysaccharides for the sequestration and protection of bioactive proteins in vivo. We have therefore sought to combine the benefits of polysaccharide derivatization of polymers with unique opportunities to use these polymers for the production of bioactive, noncovalently assembled hydrogels. Accordingly, we report the synthesis of a heparin-modified poly(ethylene glycol) (PEG) star copolymer that can be used in the assembly of bioactive hydrogel networks via multiple strategies and that is also competent for the delivery of bioactive growth factors. A heparin-decorated polymer, synthesized by the reaction of thiol end-terminated four-arm star PEG (M(n) = 10 000) with maleimide functionalized low molecular weight heparin (LMWH, M(r) = 3000), has been characterized via (1)H NMR spectroscopy and size-exclusion chromatography; results indicate attachment of the LMWH with at least 73% efficiency. Both covalently and noncovalently assembled hydrogels can be produced from the PEG-LMWH conjugate. Viscoelastic noncovalently assembled hydrogels have been formed on the basis of the interaction of the PEG-LMWH with a PEG polymer bearing multiple heparin-binding peptide motifs. The binding and release of therapeutically important proteins from the assembled hydrogels have also been demonstrated via immunochemical assays, which demonstrate the slow release of basic fibroblast growth factor (bFGF) as a function of matrix erosion. The combination of these results suggests the opportunities for producing polymer-polysaccharide conjugates that can assemble into novel hydrogel networks on the basis of peptide-saccharide interactions and for employing these materials in delivery applications.     

Paclitaxel delivery to brain tumors from hydrogels: a computational study

Malignant gliomas are aggressive forms of primary brain tumors characterized by a poor prognosis. The most successful treatment so far is the local implantation of polymer carriers (Gliadel® wafers) for the sustained release of carmustine. To improve the effectiveness of local drug treatment, new polymer carriers and pharmacological agents are currently being investigated. Of particular interest is a set of novel thermo‐gelling polymers for the controlled release of hydrophobic drugs such as paclitaxel (e.g., OncoGel?). Herein, we use computational mass transport simulations to investigate the effectiveness of paclitaxel delivery from hydrogel‐forming polymer carriers. We found similar (within 1–2 mm) therapeutic penetration distances of paclitaxel when released from these hydrogels as compared with carmustine released from Gliadel® wafers. Effective therapeutic concentrations were maintained for >30 days for paclitaxel when released from the hydrogel as compared with 4 days for carmustine released from Gliadel® wafers. Convection in brain tissue prevented the formation of a uniform drug concentration gradient around the implant. In addition, the surface area to volume ratio of the gel is an important factor that should be considered to maintain a controlled release of paclitaxel within the degradation lifetime of the polymer matrix. © 2011 American Institute of Chemical Engineers Biotechnol. Prog., 2011     

Free-radical-mediated protein inactivation and recovery during protein photoencapsulation

Photoencapsulation of protein therapeutics is very attractive for preparing biomolecule-loaded hydrogels for a variety of biomedical applications. However, detrimental effects of highly active radical species generated during photoencapsulation must be carefully evaluated to maintain efficient hydrogel cross-linking while preserving the structure and bioactivity of encapsulated biomolecules. Here, we examine the free-radical-mediated inactivation and incomplete release of proteins from photocurable hydrogels utilizing lysozyme as a conservative model system. Various protein photoencapsulation conditions were tested to determine the factors affecting lysozyme structural integrity and bioactivity. It was found that a portion of the lysozyme becomes conjugated to polymer chains at high photoinitiator concentrations and long polymerization times. We also found that the more hydrophilic photoinitiator Irgacure-2959 (I-2959, 2-hydroxy-1-[4-(hydroxyethoxy)phenyl]-2-methyl-1-propanone) causes more damage to lysozyme compared to the hydrophobic photoinitiator Irgacure-651 (I-651, 2,2-dimethoxy-2-phenylacetophenone), even though I-2959 has been previously shown to be more cytocompatible. Furthermore, while nonacrylated PEG provides only limited protection from the denaturing free radicals that are present during hydrogel curing, acrylated PEG macromers effectively preserve lysozyme structural integrity and bioactivity in the presence of either photoinitiator. Overall, these findings indicate how photopolymerization conditions (e.g., photoinitiator type and concentration, UV exposure time, etc.) must be optimized to obtain a functional hydrogel device that can preserve protein bioactivity and provide maximal protein release.     

壳聚糖基温敏水凝胶的研究进展

壳聚糖是一种由甲壳素脱乙酰化得到的氨基多糖,具有生物相容性、低细胞毒性和可生物降解性等特点。壳聚糖/β-甘油磷酸钠溶液温敏水凝胶在组织工程、药物缓释等领域多有报道,其成胶性能取决于凝胶的组分和浓度。针对单纯壳聚糖水凝胶强度较低、降解较快、药物突释等缺陷,通常对壳聚糖进行改性或引入新材料共混,获得更符合实际需要的壳聚糖基温敏水凝胶。对近年来壳聚糖基水凝胶的研究进展进行综述,包括改性壳聚糖、共混体系等,概述了其在组织工程(软骨、血管、神经修复)、药物缓释(癌症药物缓释、糖尿病治疗)领域中研究和应用的新进展,以期为后续温敏水凝胶的进一步研究提供参考。     

Synthesis and evaluation of novel biodegradable hydrogels based on poly(ethylene glycol) and sebacic acid as tissue engineering scaffolds

Novel biodegradable poly(ethylene glycol) (PEG) based hydrogels, namely, PEG sebacate diacrylate (PEGSDA) were synthesized, and their properties were evaluated. Chemical structures of these polymers were confirmed by Fourier transform infrared and proton nuclear magnetic resonance (1H NMR) spectroscopy. After photopolymerization, the dynamic shear modulus of the hydrogels was up to 0.2 MPa for 50% PEGSDA hydrogel, significantly higher than conventional hydrogels such as PEG diacrylate (PEGDA). The swelling ratios of these macromers were significantly lower than PEGDA. The in vitro degradation study demonstrated that these hydrogels were biodegradable with weight losses about 66% and 32% for 25% and 50% PEGSDA after 8 weeks of incubation in phosphate-buffered saline at 37 degrees C. In vitro biocompatibility was assessed using cultured rat bone marrow stromal cells (MSCs) in the presence of unreacted monomers or degradation products. Unlike conventional PEGDA hydrogels, PEGSDA hydrogel without RGD peptide modification induced MSC cell adhesion similar to tissue culture polystyrene. Finally, complex three-dimensional structures of PEGSDA hydrogels using solid free form technique were fabricated and their structure integrity was better maintained than PEGDA hydrogels. These hydrogels may find use as scaffolds for tissue engineering applications.     

Highly extensible, tough, and elastomeric nanocomposite hydrogels from poly(ethylene glycol) and hydroxyapatite nanoparticles

Unique combinations of hard and soft components found in biological tissues have inspired researchers to design and develop synthetic nanocomposite gels and hydrogels with elastomeric properties. These elastic materials can potentially be used as synthetic mimics for diverse tissue engineering applications. Here we present a set of elastomeric nanocomposite hydrogels made from poly(ethylene glycol) (PEG) and hydroxyapatite nanoparticles (nHAp). The aqueous nanocomposite PEG-nHAp precursor solutions can be injected and then covalently cross-linked via photopolymerization. The resulting PEG-nHAp hydrogels have interconnected pore sizes ranging from 100 to 300 nm. They have higher extensibilities, fracture stresses, compressive strengths, and toughness when compared with conventional PEO hydrogels. The enhanced mechanical properties are a result of polymer nanoparticle interactions that interfere with the permanent cross-linking of PEG during photopolymerization. The effect of nHAp concentration and temperature on hydrogel swelling kinetics was evaluated under physiological conditions. An increase in nHAp concentration decreased the hydrogel saturated swelling degree. The combination of PEG and nHAp nanoparticles significantly improved the physical and chemical hydrogel properties as well as some biological characteristics such as osteoblast cell adhesion. Further development of these elastomeric materials can potentially lead to use as a matrix for drug delivery and tissue repair especially for orthopedic applications.     

An approach to modulate degradation and mesenchymal stem cell behavior in poly(ethylene glycol) networks

A simple, sequential approach for creation of hydrolytically degradable poly(ethylene glycol) (PEG) hydrogels has been developed and characterized. The chemistry involves an initial step growth polymerization reaction between PEG-diacrylate and dithiothreitol (DTT) to form acrylate-terminated (-PEG-DTT-)n PEG chains, followed by photocross-linking to form a hydrogel network. Varying the extent of step growth polymerization prior to photocross-linking allowed for control over the equilibrium swelling ratio, degradation, and erosion of PEG hydrogels. Hydrogel degradability had a significant effect on behavior of human mesenchymal stem cells (hMSCs) encapsulated within PEG hydrogels, both in the presence and absence of an RGDSP cell adhesion ligand. In particular, enhanced network degradability resulted in enhanced hMSC viability and spreading during in vitro culture. Comparison of degradable and nondegradable hydrogels with similar physical properties (e.g., equilibrium swelling ratio) demonstrated that hMSC viability and spreading were dependent on network degradability. This study demonstrates that hydrolytically degradable PEG hydrogels can be formed via a sequential step growth polymerization and photocross-linking process and the resulting materials may serve as promising matrices for 3-dimensional stem cell culture and tissue engineering applications.     

Photocrosslinked hyaluronic acid hydrogels: natural,biodegradable tissue engineering scaffolds

Ideally, rationally designed tissue engineering scaffolds promote natural wound healing and regeneration. Therefore, we sought to synthesize a biomimetic hydrogel specifically designed to promote tissue repair and chose hyaluronic acid (HA; also called hyaluronan) as our initial material. Hyaluronic acid is a naturally occurring polymer associated with various cellular processes involved in wound healing, such as angiogenesis. Hyaluronic acid also presents unique advantages: it is easy to produce and modify, hydrophilic and nonadhesive, and naturally biodegradable. We prepared a range of glycidyl methacrylate-HA (GMHA) conjugates, which were subsequently photopolymerized to form crosslinked GMHA hydrogels. A range of hydrogel degradation rates was achieved as well as a corresponding, modest range of material properties (e.g., swelling, mesh size). Increased amounts of conjugated methacrylate groups corresponded with increased crosslink densities and decreased degradation rates and yet had an insignificant effect on human aortic endothelial cell cytocompatibility and proliferation. Rat subcutaneous implants of the GMHA hydrogels showed good biocompatibility, little inflammatory response, and similar levels of vascularization at the implant edge compared with those of fibrin positive controls. Therefore, these novel GMHA hydrogels are suitable for modification with adhesive peptide sequences (e.g., RGD) and use in a variety of wound-healing applications.     

Drug loading into and drug release from pH- and temperature-responsive cylindrical hydrogels

Hydrogels that undergo deformation upon appropriate changes in pH or temperature have considerable promise as drug delivery vehicles. Drug uptake in swelling and nonswelling cylindrical hydrogels and drug release from these into a target fluid are investigated here. A mathematical model for hydrogel-solution composite, a composite of a distributed parameter system (cylindrical hydrogel) and a lumped parameter system (surrounding solution), is developed. The polymer network displacement in a swelling/deswelling hydrogel is described by a stress diffusion coupling model. The analytical solution for network displacement is used to predict solvent intake by swelling hydrogels, solvent efflux from deswelling hydrogels, and changes in pressure, porosity, and effective drug diffusivity. These in turn influence drug uptake during and after hydrogel swelling and drug release from hydrogel during and after deswelling. Numerical results illustrate benefits of hydrogel swelling for drug loading and merits of different modes of drug release. Drug uptake and drug release by temperature-responsive hydrogels are compared with those by hydrogels not subject to deformation.     

Novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate as a pH-sensitive hydrogel

A novel method using a temperature-sensitive polymer (methylcellulose) to thermally gel aqueous alginate blended with distinct salts (CaCl2, Na2HPO4, or NaCl), as a pH-sensitive hydrogel was developed for protein drug delivery. It was noted that the salts blended in hydrogels may affect the structures of an entangled network of methylcellulose and alginate and have an effect on their swelling characteristics. The methylcellulose/alginate hydrogel blended with 0.7 M NaCl (with a gelation temperature of 32 degrees C) demonstrated excellent pH sensitivity and was selected for the study of release profiles of a model protein drug (bovine serum albumin, BSA). In the preparation of drug-loaded hydrogels, BSA was well-mixed to the dissolved aqueous methylcellulose/alginate blended with salts at 4 degrees C and then gelled by elevating the temperature to 37 degrees C. This drug-loading procedure in aqueous environment at low temperature may minimize degradation of the protein drug while achieving a high loading efficiency (95-98%). The amount of BSA released from test hydrogels was a function of the amount of alginate used in the hydrogels. The amount of BSA released at pH 1.2 from the test hydrogel with 2.5% alginate was relatively low (20%), while that released at pH 7.4 increased significantly (86%). In conclusion, the methylcellulose/alginate hydrogel blended with NaCl could be a suitable carrier for site-specific protein drug delivery in the intestine.     

Development of a hybrid dextrin hydrogel encapsulating dextrin nanogel as protein delivery system

Dextrin, a glucose polymer with low molecular weight, was used to develop a fully resorbable hydrogel, without using chemical initiators. Dextrin was first oxidized (oDex) with sodium periodate and then cross-linked with adipic acid dihidrazide, a nontoxic cross-linking molecule. Furthermore, a new bidimensional composite hydrogel, made of oxidized dextrin incorporating dextrin nanogels (oDex-nanogel), was also developed. The oDex hydrogels showed good mechanical properties and biocompatibility, allowing the proliferation of mouse embryo fibroblasts 3T3 cultured on top of the gel. The gelation time may be controlled selecting the concentrations of the polymer and reticulating agent. Both the oDex and oDex-nanogel hydrogels are biodegradable and present a 3-D network with a continuous porous structure. The obtained hybrid hydrogel enables the release of the dextrin nanogel over an extended period of time, paralleling the mass loss curve due to the degradation of the material. The dextrin nanogel allowed the efficient incorporation of interleukin-10 and insulin in the oDex hydrogel, providing a sophisticated system of controlled release. The new hydrogels present promising properties as an injectable carrier of bioactive molecules. Both proteins and poorly water-soluble low-molecular-weight drugs are efficiently encapsulated in the nanogel, which performs as a controlled release system entrapped in the hydrogel matrix.     

Development of a biostable replacement for PEGDA hydrogels

The exceptional tunability of poly(ethylene glycol) (PEG) hydrogel chemical, mechanical, and biological properties enables their successful use in a wide range of biomedical applications. Although PEG diacrylate (PEGDA) hydrogels are often used as nondegradable controls in short-term in vitro studies, it is widely acknowledged that the hydrolytically labile esters formed upon acrylation of the PEG diol make them susceptible to slow degradation in vivo. A PEG hydrogel system that maintains the desirable properties of PEGDA while improving biostability would be valuable in preventing degradation-related failure of gel-based devices in long-term in vivo applications. To this end, PEG diacrylamide (PEGDAA) hydrogels were synthesized and characterized in quantitative comparison to traditional PEGDA hydrogels. It was found that PEGDAA hydrogel modulus and swelling can be tuned over a similar range and to comparable degrees as PEGDA hydrogels with changes in macromer molecular weight and concentration. Additionally, PEGDAA cytocompatibility, low cell adhesion, and capacity for incorporation of bioactivity were analogous to that of PEGDA. In vitro hydrolytic degradation studies showed that the amide-based PEGDAA had significantly increased biostability relative to PEGDA. Overall, these findings indicate that PEGDAA hydrogels are a suitable replacement for PEGDA hydrogels with enhanced hydrolytic resistance. In addition, these studies provide a quantitative measure of the hydrolytic degradation rate of PEGDA hydrogels which was previously lacking in the literature.     

Supramolecular Polymeric Hydrogels for Ultrasound‐Guided Protein Release

An ultrasound‐responsive carrier for protein drugs is promising for site‐specific release of proteins at disease sites in a designated time course because ultrasound readily penetrates deep into the interior of the body in a non‐invasive way. However, the guideline for designing ultrasound‐responsive carriers that are applicable to any protein remains to be established. Here, the aim is to develop an ultrasound‐responsive material for the controlled release of a variety of proteins regardless of their charge and structure. The supramolecular polymeric hydrogel crosslinked with a host–guest interaction of β‐cyclodextrin and adamantane can enclose two kinds of model proteins and site‐specifically and stepwisely release them in an ultrasound‐guided manner without losing their activities. Furthermore, ultrasound‐guided protein delivery to living cells is achieved on model tissue consisting of cells and extracellular matrix. The results of this study provide the proof of principle that the supramolecular polymeric hydrogel is applicable as the core carrier material in an ultrasound‐guided protein delivery system.     

Enzymatic degradation of hyaluronan hydrogels with different capacity for in situ bio‐mineralization

In situ cross‐linked hyaluronan (HA) hydrogels with different capacities for biomineralization were prepared and their enzymatic degradation was monitored. Covalent incorporation of bisphosphonates (BPs) into HA hydrogel results in the increased stiffness of the hydrogel in comparison with the unmodified HA hydrogel of the same cross‐linking density. The rate of enzymatic degradation of HABP hydrogel was significantly lower than the rate of degradation of control HA hydrogel in vitro. This effect is observed only in the presence of calcium ions that strongly bind to the matrix‐anchored BP groups and promote further mineralization of the matrix. The degradation of the hydrogels was followed by noninvasive fluorescence measurements enabled after mild and chemoselective labeling of cross‐linkable HA derivatives with a fluorescent tag.     

Nanostructured biodegradable polymer networks using lyotropic liquid crystalline templates

The physical properties, porosity, and physiological behavior of synthetic biodegradable hydrogels have been identified as highly critical design parameters in most tissue engineering materials applications. Nanotechnology may provide the means to manipulate these parameters by accessing control over the network structure of the biomaterial, providing unique property relationships that often result from nanostructured materials. In this study, a lyotropic liquid crystal (LLC) was used as a polymerization template in the formation of a photopolymerizable biodegradable PLA-b-PEG-b-PLA (PEG = poly(ethylene glycol); PLA = poly(lactic acid)) material with nanoscale lamellar morphology. Through ordering of the biodegradable monomer within the liquid crystal assembly, a 2-fold increase in maximum polymerization rate and a 30% increase in double bond conversion were realized over isotropic monomer formulations. The resulting network structure of the templated PLA-b-PEG-b-PLA material has a dramatic affect on the physical properties of the hydrogel including an 80% increase in network swelling and an approximately 230% increase in diffusivity. This increase in permeability and solvent uptake leads to rapid degradation of the lamellar templated samples, further demonstrating the influence of the LLC directed network structure on the porosity and physical properties of the biodegradable material. The ability to control the porosity, physical properties, and behavior of a biodegradable hydrogel simply by imparting LLC network structure, without changing the chemistry or biocompatibility of the polymer, could prove highly advantageous in the design of synthetic biomaterials for potential medical applications.     

Preparation of photolithographically patterned inverse opal hydrogel microstructures and its application to protein patterning

Protein pattern has played an important role in biosensors, bioMEMS, tissue engineering, fundamental studies of cell biology, and basic proteomics research. Here, we developed a straightforward and effective protein patterning technique using macroporous poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogel micropatterns as a three-dimensional (3D) template for protein immobilization. Micropatterns of macroporous hydrogels with inverse opal structures were prepared on poly(ethylene glycol) (PEG)-coated silicon substrates by combining a colloidal crystal templating method with photopatterning. The resultant inverse opal hydrogel (IOH) micropatterns were modified with 3-aminopropyltriethoxysilane using the hydroxyl groups in PHEMA for the covalent immobilization of proteins. Proteins were selectively immobilized only on the hydrogel micropatterns, while the PEG regions served as an effective barrier to protein adsorption. Because of their highly ordered and interconnected 3D macroporous structures and large internal surface areas, protein loading in the IOH micropattern was about six times greater than that on a non-porous hydrogel micropattern, which consequently improved the protein activity. The porosity of the hydrogel micropatterns could be controlled using different sizes of colloidal nanoparticles, and using smaller nanoparticles produced hydrogel micropatterns with higher protein loading capacities and activities. To demonstrate the potential use of IOH micropatterns in biosensor systems, biotin was micropatterned on the hydrogels and the specific binding of streptavidin was successfully assayed using IOH micropatterns with better fluorescence signals and sensitivity than that of the corresponding non-porous hydrogel micropatterns.