A method for two-dimensional characterization of animal vibrational signals transmitted along plant stems

Conventional approaches to measuring animal vibrational signals on plant stems use a single transducer to measure the amplitude of vibrations. Such an approach, however, will often underestimate the amplitude of bending waves traveling along the stem. This occurs because vibration transducers are maximally sensitive along a single axis, which may not correspond to the major axis of stem motion. Furthermore, stem motion may be more complex than that of a bending wave propagating along a single axis, and such motion cannot be described using a single transducer. Here, we describe a method for characterizing stem motion in two dimensions by processing the signals from two orthogonally positioned transducers. Viewed relative to a cross-sectional plane, a point on the stem surface moves in an ellipse at any one frequency, with the ellipse’s major axis corresponding to the maximum amplitude of vibration. The method outlined here measures the ellipse’s major and minor axes, and its angle of rotation relative to one of the transducers. We illustrate this method with measurements of stem motion during insect vibrational communication. It is likely the two-dimensional nature of stem motion is relevant to insect vibration perception, making this method a promising avenue for studies of plant-borne transmission. Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users.     

Three-dimensional motion of the organ of Corti

The vibration of the organ of Corti, a three-dimensional micromechanical structure that incorporates the sensory cells of the hearing organ, was measured in three mutually orthogonal directions. This was achieved by coupling the light of a laser Doppler vibrometer into the side arm of an epifluorescence microscope to measure velocity along the optical axis of the microscope, called the transversal direction. Displacements were measured in the plane orthogonal to the transverse direction with a differential photodiode mounted on the microscope in the focal plane. Vibration responses were measured in the fourth turn of a temporal-bone preparation of the guinea-pig cochlea. Responses were corrected for a "fast" wave component caused by the presence of the hole in the cochlear wall, made to view the structures. The frequency responses of the basilar membrane and the reticular lamina were similar, with little phase differences between the vibration components. Their motion was rectilinear and vertical to the surface of their membranes. The organ of Corti rotated about a point near the edge of the inner limbus. A second vibration mode was detected in the motion of the tectorial membrane. This vibration mode was directed parallel to the reticular lamina and became apparent for frequencies above approximately 0.5 oct below the characteristic frequency. This radial vibration mode presumably controls the shearing action of the hair bundles of the outer hair cells.     

Polarization selectivity of interaction of DNA molecules with X-ray radiation

The optimum form of a long helical molecule, which DNA is, has been calculated in terms of the classical electromagnetic theory. Three different methods of classical electrodynamics are used: the theory of dipole radiation of electromagnetic waves, the energetic power approach, and a helical model of molecules of chiral medium. In all three cases, an identical result for the optimum geometrical form of a long spiral molecule has been obtained. The lead angle between the tangent to the helix and the plane normal to the axis of the helix should be equal to 24.5 degrees. This condition imposes restrictions on the radius and the pitch of the helical molecule. The experimentally measured geometrical characteristics of the DNA molecule satisfy the theoretically calculated condition precisely enough. Having the optimum geometrical form, the DNA molecule is not influenced by a circularly right-polarized electromagnetic wave in the soft X-ray range λ = 7–8 nm. This wave, for which the right-handed DNA molecule is “transparent,” should propagate orthogonally to the helix axis and form a right-handed screw in space. The wave radiated by the right-handed DNA molecule orthogonally to helix axis in the range of λ ≈ 7–8 nm has, accordingly, the left-handed circular polarization. The polarization selectivity of the DNA molecule by the action of X-ray radiation is exhibited strongly enough in the wavelength range of λ ≈ 1–35 nm. The results obtained are valid for any distribution of electric currents in DNA, i.e., for any sequence of nitrogenous bases in DNA.     

Acoustic myography during voluntary isometric contraction reveals non-propagative lateral vibration

When isolated muscle synchronous contraction is evoked during in vitro twitches, mechanical vibrations at the surface of the muscle reflect resonant behavior. In contrast, voluntary contraction corresponds to the asynchronous contraction of recruited motor units, therefore, this kind of excitation could lead to different muscle vibrational behavior. We have studied human biceps brachii muscle during voluntary contraction in 10 healthy subjects. Low and high levels of voluntary contraction were explored with simultaneous recording of surface vibration by two sensors located longitudinally or perpendicular to the muscle's main axis. Cross-correlation and coherence functions were computed. Coherence functions revealed a common vibration frequency band between 17 and 28 Hz. Cross correlation functions revealed in-phase vibration for longitudinal sensors and opposite phase vibration for perpendicular sensors thus confirming a lateral bending movement. This behavior suggests that the acoustic myogram is the response of the muscle as a global resonant structure to the local fluctuations of pressure.     

Wireless Electric Energy Transmission through Various Isolated Solid Media Based on Triboelectric Nanogenerator

Wireless electric energy transmission is an important energy supply technology. However, most wireless energy supply based on electromagnetic induction cannot be used for energy transmission through a metal chamber. Herein, a novel idea for wireless electric energy transmission through various isolated solid media based on triboelectric nanogenerator (TENG) is presented. The electric energy is first transformed into mechanical vibration energy in mechanical wave that can propagate well in solid medium, and then the vibration energy is harvested by a TENG. By employing the spring steel sheets and freestanding triboelectric‐layer structure, the vibration TENG as an energy conversion unit has the advantages of high efficiency and facilitation, boosting this wireless energy transmission technology to be an alternative way of delivering electric energy through metal medium. The working principle and output performance have been systematically studied. A commercial capacitor can be charged from 0 to 10 V in 33 and 86 s isolated by an acrylic plate and a copper plate in thickness of 3 mm, respectively. The wireless electric transmission technology is also applied to deliver electric energy into a vacuum glove box and across glass wall successfully. This novel technology has great potential applications in implantable microelectronic devices, encrypted wireless communication, and even nondestructive testing.     

Devolution of inhomogeneities in bone structure--predictions of adaptive elasticity theory

In this paper we consider an initially inhomogeneous adaptive elastic body subjected to a steady homogeneous stress state. The adaptive elastic body, which is a model for living bone tissue, is inhomogeneous in both its anisotropic elastic properties and its density. The principal result of the paper is the determination of the devolution of the initially inhomogeneous body to a homogeneous body under the influence of the steady homogeneous stress state. A cylindrical body that is inhomogeneous along the axis of the cylinder, but homogeneous in each transverse plane of the cylinder, is used as an example. This cylindrical body is loaded by a steady uniform stress directed along the cylindrical axis. The temporal devolution of an inhomogeneity in the initial shape of a sine wave is illustrated. As time progresses the amplitude of the sine wave decreases, rapidly at first and then more slowly. As time becomes very large the sine wave becomes a straight line signifying that the cylinder has become homogeneous.     

ORIENTATION AND LOCUS OF TROPIC PHOTORECEPTOR MOLECULES IN SPORES OF BOTRYTIS AND OSMUNDA

Study of the tropic responses of Botrytis cinerea and Osmunda cinnamomea spores to blue light shows the photoreceptor molecules to be highly dichroic and oriented: in Botrytis their axes of maximum absorption lie perpendicular to the nearby cell surface; in Osmunda, parallel. The chief evidence lies in a comparison of their responses to plane polarized light—both germinate parallel to the vibration planes (defined by the axis of vibration of the electric vector and the axis of light propagation)—with those to partial illumination with unpolarized light: Botrytis grows from its brighter part; Osmunda, from its darker. The degree of orientation produced by polarized light corresponds, at high intensities, to that produced by the imposition of such large (about 100 per cent) intensity differences across a cell as to preclude all alternatives to oriented dichroic receptors. The photoreceptors of the Botrytis spore lie within the cell wall's inner half. The chief evidence lies in the component of its tropic responses to polarized light within the vibration plane: germination peaks about 10° off the vibration axis. This deviation arises from focusing which is effective only in the wall's inner half. At high intensities, anomalies appear in Botrytis which are interpreted as "centering," i.e., a tendency toward growth from the center of two or more equally illuminated points of a cell rather than from one of them.     

Actuating Mechanism and Design of a Cylindrical Traveling Wave Ultrasonic Motor Using Cantilever Type Composite Transducer

Background

Ultrasonic motors (USM) are based on the concept of driving the rotor by a mechanical vibration excited on the stator via piezoelectric effect. USM exhibit merits such as simple structure, quick response, quiet operation, self-locking when power off, nonelectromagnetic radiation and higher position accuracy.

Principal Findings

A cylindrical type traveling wave ultrasonic motor using cantilever type composite transducer was proposed in this paper. There are two cantilevers on the outside surface of cylinder, four longitudinal PZT ceramics are set between the cantilevers, and four bending PZT ceramics are set on each outside surface of cantilevers. Two degenerate flexural vibration modes spatially and temporally orthogonal to each other in the cylinder are excited by the composite transducer. In this new design, a single transducer can excite a flexural traveling wave in the cylinder. Thus, elliptical motions are achieved on the teeth. The actuating mechanism of proposed motor was analyzed. The stator was designed with FEM. The two vibration modes of stator were degenerated. Transient analysis was developed to gain the vibration characteristic of stator, and results indicate the motion trajectories of nodes on the teeth are nearly ellipses.

Conclusions

The study results verify the feasibility of the proposed design. The wave excited in the cylinder isn''t an ideal traveling wave, and the vibration amplitudes are inconsistent. The distortion of traveling wave is generated by the deformation of bending vibration mode of cylinder, which is caused by the coupling effect between the cylinder and transducer. Analysis results also prove that the objective motions of nodes on the teeth are three-dimensional vibrations. But, the vibration in axial direction is minute compared with the vibrations in circumferential and radial direction. The results of this paper can guide the development of this new type of motor.     

Effects of acute upper-body vibration on strength and power variables in climbers

Whole-body vibration training has recently received a lot of attention with reported enhancements of strength and power qualities in athletes. This study investigated whether upper-body vibration would be able to augment muscular attributes for climbing performance. Twelve healthy active climbers volunteered for the study. All participants underwent 3 treatments--arm cranking (AC), upper-body vibration (UBV), and non-UBV (NUBV)--in a balanced random order, conducted on separate days. Upper-body vibration was generated via a commercialized electric-powered dumbbell with a rotating axis that delivered oscillatory movements to the shoulders and arms. The UBV treatment consisted of performing 5 upper-body exercises for a total duration of 5 minutes. The UBV frequency was set at 26 Hz, amplitude 3 mm. For the NUBV treatment, the participants performed the exact exercises and time constraints as UBV; however, the vibration dumbbell was set at 0 Hz and 0 mm amplitude. The third treatment consisted of AC, which was performed at 75 k.min(-1) for 5 minutes. Pre- and postmuscular performance measures of medicine ball throw, hand grip strength, and a specific climbing maneuver were performed after each treatment. There were no significant treatment differences on medicine ball throw, hand grip strength, and the specific climbing maneuver. Acute UBV exposure did not demonstrate the expected potential neuromuscular enhancements on the climbing performance tests selected for this study.     

Channeling of high-power radio waves under conditions of strong anomalous absorption in the presence of an averaged electron heating source

Strong anomalous absorption of a high-power radio wave by small-scale plasma inhomogeneities in the Earth’s ionosphere can lead to the formation of self-consistent channels (solitons) in which the wave propagates along the magnetic field, but has a soliton-like intensity distribution across the field. The structure of a cylindrical soliton as a function of the wave intensity at the soliton axis is analyzed. Averaged density perturbations leading to wave focusing were calculated using the model proposed earlier by Vas’kov and Gurevich (Geomagn. Aéron. 16, 1112 (1976)), in which an averaged electron heating source was used. It is shown that, under conditions of strong electron recombination, the radii of individual solitons do not exceed 650 m.     

Low frequency vibrations disrupt left-right patterning in the Xenopus embryo

The development of consistent left-right (LR) asymmetry across phyla is a fascinating question in biology. While many pharmacological and molecular approaches have been used to explore molecular mechanisms, it has proven difficult to exert precise temporal control over functional perturbations. Here, we took advantage of acoustical vibration to disrupt LR patterning in Xenopus embryos during tightly-circumscribed periods of development. Exposure to several low frequencies induced specific randomization of three internal organs (heterotaxia). Investigating one frequency (7 Hz), we found two discrete periods of sensitivity to vibration; during the first period, vibration affected the same LR pathway as nocodazole, while during the second period, vibration affected the integrity of the epithelial barrier; both are required for normal LR patterning. Our results indicate that low frequency vibrations disrupt two steps in the early LR pathway: the orientation of the LR axis with the other two axes, and the amplification/restriction of downstream LR signals to asymmetric organs.     

Effect of vibration on the structure and properties of polymer membranes

The structural memory effect in a wave field has been studied by IR spectroscopy using butadiene-styrene and acrylic latex blend films as polymer membrane models. Notable is the enhancement of interactions between phases in such systems, which can cause changes in their local and translational mobility. The response of disperse polymer systems and their composites to nonlinear vibrations means that their deformation properties are affected by vibration, by analogy with orientation phenomena in solid polymers (where the Rebinder effect can appear), and can be considered as a means for modifying polymers, including the manufacture of nanocomposites, polymer biocarriers, etc.     

An analytical study of blasting vibration using deep mining and drivage rules

For the study on the propagation–attenuation rule of the blasting vibration wave in the deep mining roadway of Shizishan copper mine, and the analysis of the influences of different maximum explosive charges and different underground systems on the propagation of blasting vibration signals, blasting vibration monitoring of the two different situations has been carried out respectively. Firstly, the Sadov’s Formula has been applied to analyzing the monitoring results of the mining roadway, and thus the value of its excavation blasting vibration attenuation index K and \(\alpha \) and its corresponding regression formula were attained; then, the appropriate regression formula was used to calculate the maximum explosive charge which could ensure the safety of the principal chambers underground the mine. Meanwhile, on the basis of the HHT analysis method, the rule of vibration wave propagation under these two different situations was analyzed. And the results indicated that, whether with an increase in the single charge, or with an increase in the number of the underground systems to cross, blasting seismic wave had a tendency for spreading to the low-frequency band. Through the regression analysis of the Sadov’s Formula and the HHT Method, the results provided a reliable basis for the safe and efficient production of the mine.     

Vibration and Animal Communication: A Review

Vibration through the substrate has likely been important toanimals as a channel of communication for millions of years,but our awareness of vibration as biologically relevant informationhas a history of only the last 30 yr. Morphologists know thatthe jaw mechanism of early amphibians allowed them to perceivevibration through the substrate as their large heads lay onthe ground. Although the exact mechanism of vibration productionand the precise nature of the wave produced are not always understood,recent technical advances have given answers to increasinglysophisticated questions about how animals send and receive signalsthrough the substrate. Some of us have been forced to explorethe use of vibration when all other attempts to manipulate animalsin the field have failed, while others began to think aboutvibration to explain some of the puzzling behaviors of speciesthey were studying in other contexts. It has thus become clearthat the use of vibration in animal communication is much morewidespread than previously thought. We now know that vibrationprovides information used in predator-prey interactions, recruitmentto food, mate choice, intrasexual competition and maternal/broodsocial interactions in a range of animals from insects to elephants.     

Validity of Measurement of Shear Modulus by Ultrasound Shear Wave Elastography in Human Pennate Muscle

Ultrasound shear wave elastography is becoming a valuable tool for measuring mechanical properties of individual muscles. Since ultrasound shear wave elastography measures shear modulus along the principal axis of the probe (i.e., along the transverse axis of the imaging plane), the measured shear modulus most accurately represents the mechanical property of the muscle along the fascicle direction when the probe’s principal axis is parallel to the fascicle direction in the plane of the ultrasound image. However, it is unclear how the measured shear modulus is affected by the probe angle relative to the fascicle direction in the same plane. The purpose of the present study was therefore to examine whether the angle between the principal axis of the probe and the fascicle direction in the same plane affects the measured shear modulus. Shear modulus in seven specially-designed tissue-mimicking phantoms, and in eleven human in-vivo biceps brachii and medial gastrocnemius were determined by using ultrasound shear wave elastography. The probe was positioned parallel or 20° obliquely to the fascicle across the B-mode images. The reproducibility of shear modulus measurements was high for both parallel and oblique conditions. Although there was a significant effect of the probe angle relative to the fascicle on the shear modulus in human experiment, the magnitude was negligibly small. These findings indicate that the ultrasound shear wave elastography is a valid tool for evaluating the mechanical property of pennate muscles along the fascicle direction.     

Syrinx fluid transport: modeling pressure-wave-induced flux across the spinal pial membrane

Syrinxes are fluid-filled cavities of the spinal cord that characterize syringomyelia, a disease involving neurological damage. Their formation and expansion is poorly understood, which has hindered successful treatment. Syrinx cavities are hydraulically connected with the spinal subarachnoid space (SSS) enveloping the spinal cord via the cord interstitium and the network of perivascular spaces (PVSs), which surround blood vessels penetrating the pial membrane that is adherent to the cord surface. Since the spinal canal supports pressure wave propagation, it has been hypothesized that wave-induced fluid exchange across the pial membrane may play a role in syrinx filling. To investigate this conjecture a pair of one-dimensional (1-d) analytical models were developed from classical elastic tube theory coupled with Darcy's law for either perivascular or interstitial flow. The results show that transpial flux serves as a mechanism for damping pressure waves by alleviating hoop stress in the pial membrane. The timescale ratio over which viscous and inertial forces compete was explicitly determined, which predicts that dilated PVS, SSS flow obstructions, and a stiffer and thicker pial membrane-all associated with syringomyelia-will increase transpial flux and retard wave travel. It was also revealed that the propagation of a pressure wave is aided by a less-permeable pial membrane and, in contrast, by a more-permeable spinal cord. This is the first modeling of the spinal canal to include both pressure-wave propagation along the spinal axis and a pathway for fluid to enter and leave the cord, which provides an analytical foundation from which to approach the full poroelastic problem.     

Study of protein conformation and orientation in silkworm and spider silk fibers using Raman microspectroscopy

Raman microspectroscopy has been used for the first time to determine quantitatively the orientation of the beta-sheets in silk monofilaments from Bombyx mori and Samia cynthia ricini silkworms, and from the spider Nephila edulis. It is shown that, for systems with uniaxial symmetry such as silk, it is possible to determine the order parameters P2 and P4 of the orientation distribution function from intensity ratios of polarized Raman spectra. The equations allowing the calculation of P2 and P4 using polarized Raman microspectroscopy for a vibration with a cylindrical Raman tensor were first derived and then applied to the amide I band that is mostly due to the C=O stretching vibration of the peptide groups. The shape of the Raman tensor for the amide I vibration of the beta-sheets was determined from an isotropic film of Bombyx mori silk treated with methanol. For both the Bombyx mori and Samia cynthia ricini fibroin fibers, the values of P2 and P4 obtained are equal to -0.36 +/- 0.03 and 0.19 +/- 0.02, respectively, even though the two types of silkworm fibroins strongly differ in their primary sequences. For the Nephila edulis dragline silk, values of P2 and P4 of -0.32 +/- 0.02 and 0.13 +/- 0.02 were obtained, respectively. These results clearly indicate that the carbonyl groups are highly oriented perpendicular to the fiber axis and that the beta-sheets are oriented parallel to the fiber axis, in agreement with previous X-ray and NMR results. The most probable distribution of orientation was also calculated from the values of P2 and P4 using the information entropy theory. For the three types of silk, the beta-sheets are highly oriented parallel to the fiber axis. The orientation distributions of the beta-sheets are nearly Gaussian functions with a width of 32 degrees and 40 degrees for the silkworm fibroins and the spider dragline silk, respectively. In addition to these results, the comparison of the Raman spectra recorded for the different silk samples and the polarization dependence of several bands has allowed to clarify some important band assignments.     

Long-term cortisol treatment inhibits pubertal development in male common carp, Cyprinus carpio L

The onset and regulation of puberty is determined by functional development of the brain-pituitary-gonad (BPG) axis. Stress has been shown to interfere with reproduction and the functioning of the BPG axis. The response to chronic and severe stress may require much energy and force the organism to make adaptive choices. Energy that is normally available for processes like growth, immune response, or reproduction will be channeled into restoration of the disturbed homeostasis. Cortisol plays a key role in the homeostatic adaptation during or after stress. In the present study, immature common carp were fed with cortisol-containing food pellets covering the pubertal period. We showed that cortisol caused an inhibition of pubertal development, by affecting directly or indirectly all components of the BPG axis. The salmon GnRH content of the brain was decreased. Luteinizing hormone- and FSH-encoding mRNA levels in the pituitary and LH plasma levels were diminished by long-term cortisol treatment, as was the testicular androgen secretion. Testicular development, reflected by gonadosomatic index and the first wave of spermatogenesis, was retarded.     

Crystallographic analysis of the thermal motion of the inclusion complex of cyclomaltoheptaose (beta-cyclodextrin) with hexamethylenetetramine

The crystal structure of the inclusion complex of cyclomaltoheptaose (beta-cyclodextrin) with hexamethylenetetramine was determined at temperatures of 123, 173, 223, and 293 K. The rigid-body motion of the host and guest molecules was evaluated by means of the TLS method that represents the molecular motion in terms of translation, libration, and screw motion. In increasing the temperature from 123 to 293 K, the amplitude of the rigid body vibration of the host molecule was increased from 1.0 to 1.3 degrees in the rotational motion and from 0.16 to 0.17 A in the translational motion. The cyclomaltoheptaose molecule has the flexibility in seven alpha-(1-->4)-linkages, and each glucose unit was in the rotational vibration around an axis through two glycosidic oxygen atoms. As a result, the rigid-body parameters of cyclomaltoheptaose were considered to be overestimated because of including the contribution from the local motion of glucose units. In contrast, for the guest molecule having no structural flexibility, the TLS analysis demonstrated that the atomic thermal vibration was mostly derived from the rigid body motion. The rotational amplitude of hexamethylenetetramine was changed from 5.2 to 6.6 degrees in increasing the temperature from 123 to 293 K, while the change of the translational amplitude was from 0.20 to 0.23 A. The translational motion of the guest molecule was hindered by the inside wall of the host cavity. The molecular motion was characterized by the rotational vibration around the axis through two nitrogen atoms that were involved in the hydrogen-bond formation.