Visualization of eukaryotic DNA mismatch repair reveals distinct recognition and repair intermediates

DNA mismatch repair (MMR) increases replication fidelity by eliminating mispaired bases resulting from replication errors. In Saccharomyces cerevisiae, mispairs are primarily detected by the Msh2-Msh6 complex and corrected following recruitment of the Mlh1-Pms1 complex. Here, we visualized functional fluorescent versions of Msh2-Msh6 and Mlh1-Pms1 in living cells. We found that the Msh2-Msh6 complex is an S phase component of replication centers independent of mispaired bases; this localized pool accounted for 10%-15% of MMR in wild-type cells but was essential for MMR in the absence of Exo1. Unexpectedly, Mlh1-Pms1 formed nuclear foci that, although dependent on Msh2-Msh6 for formation, rarely colocalized with Msh2-Msh6 replication-associated foci. Mlh1-Pms1 foci increased when the number of mispaired bases was increased; in contrast, Msh2-Msh6 foci were unaffected. These findings suggest the presence of replication machinery-coupled and -independent pathways for mispair recognition by Msh2-Msh6, which direct formation of superstoichiometric Mlh1-Pms1 foci that represent sites of active MMR.     

Activation of Saccharomyces cerevisiae Mlh1-Pms1 Endonuclease in a Reconstituted Mismatch Repair System

Previous studies reported the reconstitution of an Mlh1-Pms1-independent 5′ nick-directed mismatch repair (MMR) reaction using Saccharomyces cerevisiae proteins. Here we describe the reconstitution of a mispair-dependent Mlh1-Pms1 endonuclease activation reaction requiring Msh2-Msh6 (or Msh2-Msh3), proliferating cell nuclear antigen (PCNA), and replication factor C (RFC) and a reconstituted Mlh1-Pms1-dependent 3′ nick-directed MMR reaction requiring Msh2-Msh6 (or Msh2-Msh3), exonuclease 1 (Exo1), replication protein A (RPA), RFC, PCNA, and DNA polymerase δ. Both reactions required Mg²⁺ and Mn²⁺ for optimal activity. The MMR reaction also required two reaction stages in which the first stage required incubation of Mlh1-Pms1 with substrate DNA, with or without Msh2-Msh6 (or Msh2-Msh3), PCNA, and RFC but did not require nicking of the substrate, followed by a second stage in which other proteins were added. Analysis of different mutant proteins demonstrated that both reactions required a functional Mlh1-Pms1 endonuclease active site, as well as mispair recognition and Mlh1-Pms1 recruitment by Msh2-Msh6 but not sliding clamp formation. Mutant Mlh1-Pms1 and PCNA proteins that were defective for Exo1-independent but not Exo1-dependent MMR in vivo were partially defective in the Mlh1-Pms1 endonuclease and MMR reactions, suggesting that both reactions reflect the activation of Mlh1-Pms1 seen in Exo1-independent MMR in vivo. The availability of this reconstituted MMR reaction should now make it possible to better study both Exo1-independent and Exo1-dependent MMR.     

Mispair-specific Recruitment of the Mlh1-Pms1 Complex Identifies Repair Substrates of the Saccharomyces cerevisiae Msh2-Msh3 Complex

DNA mismatch repair is initiated by either the Msh2-Msh6 or the Msh2-Msh3 mispair recognition heterodimer. Here we optimized the expression and purification of Saccharomyces cerevisiae Msh2-Msh3 and performed a comparative study of Msh2-Msh3 and Msh2-Msh6 for mispair binding, sliding clamp formation, and Mlh1-Pms1 recruitment. Msh2-Msh3 formed sliding clamps and recruited Mlh1-Pms1 on +1, +2, +3, and +4 insertion/deletions and CC, AA, and possibly GG mispairs, whereas Msh2-Msh6 formed mispair-dependent sliding clamps and recruited Mlh1-Pms1 on 7 of the 8 possible base:base mispairs, the +1 insertion/deletion mispair, and to a low level on the +2 but not the +3 or +4 insertion/deletion mispairs and not on the CC mispair. The mispair specificity of sliding clamp formation and Mlh1-Pms1 recruitment but not mispair binding alone correlated best with genetic data on the mispair specificity of Msh2-Msh3- and Msh2-Msh6-dependent mismatch repair in vivo. Analysis of an Msh2-Msh6/Msh3 chimeric protein and mutant Msh2-Msh3 complexes showed that the nucleotide binding domain and communicating regions but not the mispair binding domain of Msh2-Msh3 are responsible for the extremely rapid dissociation of Msh2-Msh3 sliding clamps from DNA relative to that seen for Msh2-Msh6, and that amino acid residues predicted to stabilize Msh2-Msh3 interactions with bent, strand-separated mispair-containing DNA are more critical for the recognition of small +1 insertion/deletions than larger +4 insertion/deletions.     

Engineered Disulfide-forming Amino Acid Substitutions Interfere with a Conformational Change in the Mismatch Recognition Complex Msh2-Msh6 Required for Mismatch Repair

ATP binding causes the mispair-bound Msh2-Msh6 mismatch recognition complex to slide along the DNA away from the mismatch, and ATP is required for the mispair-dependent interaction between Msh2-Msh6 and Mlh1-Pms1. It has been inferred from these observations that ATP induces conformational changes in Msh2-Msh6; however, the nature of these conformational changes and their requirement in mismatch repair are poorly understood. Here we show that ATP induces a conformational change within the C-terminal region of Msh6 that protects the trypsin cleavage site after Msh6 residue Arg¹¹²⁴. An engineered disulfide bond within this region prevented the ATP-driven conformational change and resulted in an Msh2-Msh6 complex that bound mispaired bases but could not form sliding clamps or bind Mlh1-Pms1. The engineered disulfide bond also reduced mismatch repair efficiency in vivo, indicating that this ATP-driven conformational change plays a role in mismatch repair.     

Mlh1-Mlh3, a Meiotic Crossover and DNA Mismatch Repair Factor,Is a Msh2-Msh3-stimulated Endonuclease

Crossing over between homologous chromosomes is initiated in meiotic prophase in most sexually reproducing organisms by the appearance of programmed double strand breaks throughout the genome. In Saccharomyces cerevisiae the double-strand breaks are resected to form three prime single-strand tails that primarily invade complementary sequences in unbroken homologs. These invasion intermediates are converted into double Holliday junctions and then resolved into crossovers that facilitate homolog segregation during Meiosis I. Work in yeast suggests that Msh4-Msh5 stabilizes invasion intermediates and double Holliday junctions, which are resolved into crossovers in steps requiring Sgs1 helicase, Exo1, and a putative endonuclease activity encoded by the DNA mismatch repair factor Mlh1-Mlh3. We purified Mlh1-Mlh3 and showed that it is a metal-dependent and Msh2-Msh3-stimulated endonuclease that makes single-strand breaks in supercoiled DNA. These observations support a direct role for an Mlh1-Mlh3 endonuclease activity in resolving recombination intermediates and in DNA mismatch repair.     

Interaction between the Msh2 and Msh6 Nucleotide-binding Sites in the Saccharomyces cerevisiae Msh2-Msh6 Complex

Indirect evidence has suggested that the Msh2-Msh6 mispair-binding complex undergoes conformational changes upon binding of ATP and mispairs, resulting in the formation of Msh2-Msh6 sliding clamps and licensing the formation of Msh2-Msh6-Mlh1-Pms1 ternary complexes. Here, we have studied eight mutant Msh2-Msh6 complexes with defective responses to nucleotide binding and/or mispair binding and used them to study the conformational changes required for sliding clamp formation and ternary complex assembly. ATP binding to the Msh6 nucleotide-binding site results in a conformational change that allows binding of ATP to the Msh2 nucleotide-binding site, although ATP binding to the two nucleotide-binding sites appears to be uncoupled in some mutant complexes. The formation of Msh2-Msh6-Mlh1-Pms1 ternary complexes requires ATP binding to only the Msh6 nucleotide-binding site, whereas the formation of Msh2-Msh6 sliding clamps requires ATP binding to both the Msh2 and Msh6 nucleotide-binding sites. In addition, the properties of the different mutant complexes suggest that distinct conformational states mediated by communication between the Msh2 and Msh6 nucleotide-binding sites are required for the formation of ternary complexes and sliding clamps.     

Roles for mismatch repair family proteins in promoting meiotic crossing over

The mismatch repair (MMR) family complexes Msh4-Msh5 and Mlh1-Mlh3 act with Exo1 and Sgs1-Top3-Rmi1 in a meiotic double strand break repair pathway that results in the asymmetric cleavage of double Holliday junctions (dHJ) to form crossovers. This review discusses how meiotic roles for Msh4-Msh5 and Mlh1-Mlh3 do not fit paradigms established for post-replicative MMR. We also outline models used to explain how these factors promote the formation of meiotic crossovers required for the accurate segregation of chromosome homologs during the Meiosis I division.     

Cadmium inhibits the functions of eukaryotic MutS complexes

Exposure of yeast cells to low concentrations of cadmium results in elevated mutation rates due to loss of mismatch repair (MMR), and cadmium inhibits MMR activity in extracts of human cells. Here we show that cadmium inhibits both Msh2-Msh6- and Msh2-Msh3-dependent human MMR activity in vitro. This inhibition, which occurs at a step or steps preceding repair DNA synthesis, is observed for repair directed by either a 3' or a 5' nick. In an attempt to identify the protein target(s) of cadmium inhibition, we show that cadmium inhibition of MMR is not reversed by addition of zinc to the repair reaction, suggesting that the target is not a zinc metalloprotein. We then show that cadmium inhibits ATP hydrolysis by yeast Msh2-Msh6 but has no effect on ATPase hydrolysis by yeast Mlh1-Pms1. Steady state kinetic analysis with wild type Msh2-Msh6, and with heterodimers containing subunit-specific Glu to Ala replacements inferred to inactivate the ATPase activity of either Msh2 or Msh6, suggest that cadmium inhibits ATP hydrolysis by Msh6 but not Msh2. Cadmium also reduces DNA binding by Msh2-Msh6 and more so for mismatched than matched duplexes. These data indicate that eukaryotic Msh2-Msh3 and Msh2-Msh6 complexes are targets for inhibition of MMR by cadmium, a human lung carcinogen that is ubiquitous in the environment.     

DNA binding properties of the yeast Msh2-Msh6 and Mlh1-Pms1 heterodimers

We describe here our recent studies of the DNA binding properties of Msh2-Msh6 and Mlh1-Pms1, two protein complexes required to repair mismatches generated during DNA replication. Mismatched DNA binding by Msh2-Msh6 was probed by mutagenesis based on the crystal structure of the homologous bacterial MutS homodimer bound to DNA. The results suggest that several amino acid side chains inferred to interact with the DNA backbone near the mismatch are critical for repair activity. These contacts, which are different in Msh2 and Msh6, likely facilitate stacking and hydrogen bonding interactions between side chains in Msh6 and the mismatched base, thus stabilizing a kinked DNA conformation that permits subsequent repair steps coordinated by the Mlh1-Pms1 heterodimer. Mlh1-Pms1 also binds to DNA, but independently of a mismatch. Mlh1-Pms1 binds short DNA substrates with low affinity and with a slight preference for single-stranded DNA. It also binds longer duplex DNA molecules, but with a higher affinity indicative of cooperative binding. Indeed, imaging by atomic force microscopy reveals cooperative DNA binding and simultaneous interaction with two DNA duplexes. The novel DNA binding properties of Mlh1-Pms1 may be relevant to signal transduction during DNA mismatch repair and to recombination, meiosis and cellular responses to DNA damage.     

The Unstructured Linker Arms of Mlh1-Pms1 Are Important for Interactions with DNA during Mismatch Repair

DNA mismatch repair (MMR) models have proposed that MSH (MutS homolog) proteins identify DNA polymerase errors while interacting with the DNA replication fork. MLH (MutL homolog) proteins (primarily Mlh1-Pms1 in baker's yeast) then survey the genome for lesion-bound MSH proteins. The resulting MSH-MLH complex formed at a DNA lesion initiates downstream steps in repair. MLH proteins act as dimers and contain long (20-30nm) unstructured arms that connect two terminal globular domains. These arms can vary between 100 and 300 amino acids in length, are highly divergent between organisms, and are resistant to amino acid substitutions. To test the roles of the linker arms in MMR, we engineered a protease cleavage site into the Mlh1 linker arm domain of baker's yeast Mlh1-Pms1. Cleavage of the Mlh1 linker arm in vitro resulted in a defect in Mlh1-Pms1 DNA binding activity, and in vivo proteolytic cleavage resulted in a complete defect in MMR. We then generated a series of truncation mutants bearing Mlh1 and Pms1 linker arms of varying lengths. This work revealed that MMR is greatly compromised when portions of the Mlh1 linker are removed, whereas repair is less sensitive to truncation of the Pms1 linker arm. Purified complexes containing truncations in Mlh1 and Pms1 linker arms were analyzed and found to have differential defects in DNA binding that also correlated with the ability to form a ternary complex with Msh2-Msh6 and mismatch DNA. These observations are consistent with the unstructured linker domains of MLH proteins providing distinct interactions with DNA during MMR.     

Dominant Mutations in S. cerevisiae PMS1 Identify the Mlh1-Pms1 Endonuclease Active Site and an Exonuclease 1-Independent Mismatch Repair Pathway

Lynch syndrome (hereditary nonpolypsis colorectal cancer or HNPCC) is a common cancer predisposition syndrome. Predisposition to cancer in this syndrome results from increased accumulation of mutations due to defective mismatch repair (MMR) caused by a mutation in one of the mismatch repair genes MLH1, MSH2, MSH6 or PMS2/scPMS1. To better understand the function of Mlh1-Pms1 in MMR, we used Saccharomyces cerevisiae to identify six pms1 mutations (pms1-G683E, pms1-C817R, pms1-C848S, pms1-H850R, pms1-H703A and pms1-E707A) that were weakly dominant in wild-type cells, which surprisingly caused a strong MMR defect when present on low copy plasmids in an exo1Δ mutant. Molecular modeling showed these mutations caused amino acid substitutions in the metal coordination pocket of the Pms1 endonuclease active site and biochemical studies showed that they inactivated the endonuclease activity. This model of Mlh1-Pms1 suggested that the Mlh1-FERC motif contributes to the endonuclease active site. Consistent with this, the mlh1-E767stp mutation caused both MMR and endonuclease defects similar to those caused by the dominant pms1 mutations whereas mutations affecting the predicted metal coordinating residue Mlh1-C769 had no effect. These studies establish that the Mlh1-Pms1 endonuclease is required for MMR in a previously uncharacterized Exo1-independent MMR pathway.     

Multiple factors insulate Msh2-Msh6 mismatch repair activity from defects in Msh2 domain I

DNA mismatch repair (MMR) is a highly conserved mutation avoidance mechanism that corrects DNA polymerase misincorporation errors. In initial steps in MMR, Msh2-Msh6 binds mispairs and small insertion/deletion loops, and Msh2-Msh3 binds larger insertion/deletion loops. The msh2Δ1 mutation, which deletes the conserved DNA-binding domain I of Msh2, does not dramatically affect Msh2-Msh6-dependent repair. In contrast, msh2Δ1 mutants show strong defects in Msh2-Msh3 functions. Interestingly, several mutations identified in patients with hereditary non-polyposis colorectal cancer map to domain I of Msh2; none have been found in MSH3. To understand the role of Msh2 domain I in MMR, we examined the consequences of combining the msh2Δ1 mutation with mutations in two distinct regions of MSH6 and those that increase cellular mutational load (pol3-01 and rad27). These experiments reveal msh2Δ1-specific phenotypes in Msh2-Msh6 repair, with significant effects on mutation rates. In vitro assays demonstrate that msh2Δ1-Msh6 DNA binding is less specific for DNA mismatches and produces an altered footprint on a mismatch DNA substrate. Together, these results provide evidence that, in vivo, multiple factors insulate MMR from defects in domain I of Msh2 and provide insights into how mutations in Msh2 domain I may cause hereditary non-polyposis colorectal cancer.     

Saccharomyces cerevisiae Msh2-Msh3 acts in repair of base-base mispairs

DNA mismatch repair is thought to act through two subpathways involving the recognition of base-base and insertion/deletion mispairs by the Msh2-Msh6 heterodimer and the recognition of insertion/deletion mispairs by the Msh2-Msh3 heterodimer. Here, through genetic and biochemical approaches, we describe a previously unidentified role of the Msh2-Msh3 heterodimer in the recognition of base-base mispairs and the suppression of homology-mediated duplication and deletion mutations. Saccharomyces cerevisiae msh3 mutants did not show an increase in the rate of base substitution mutations by the CAN1 forward mutation assay compared to the rate for the wild type but did show an altered spectrum of base substitution mutations, including an increased accumulation of base pair changes from GC to CG and from AT to TA; msh3 mutants also accumulated homology-mediated duplication and deletion mutations. The mutation spectrum of mlh3 mutants paralleled that of msh3 mutants, suggesting that the Mlh1-Mlh3 heterodimer may also play a role in the repair of base-base mispairs and in the suppression of homology-mediated duplication and deletion mutations. Mispair binding analysis with purified Msh2-Msh3 and DNA substrates derived from CAN1 sequences found to be mutated in vivo demonstrated that Msh2-Msh3 exhibited robust binding to specific base-base mispairs that was consistent with functional mispair binding.     

Supercomplex formation between Mlh1-Mlh3 and Sgs1-Top3 heterocomplexes in meiotic yeast cells

The genome of Saccharomyces cerevisia encodes four mismatch repair MutL proteins and these proteins form three heterocomplexes: Mlh1-Mlh2, Mlh1-Mlh3, and Mlh1-Pms1. Only, the Mlh1-Mlh3 heterocomplex has been implicated specifically in promotion of meiotic crossing-over. In this report, we show that yeast Mlh3 co-immunoprecipitates with Sgs1 helicase in sporulating cells at late stage of meiotic prophase I. Sgs1, a member of the RecQ DNA helicase family, appears to form a stable complex with topoisomerase III (Top3) during meiosis. We suggest that Mlh1-Mlh3 heterocomplex may act as a molecular matchmaker to coordinate Sgs1-Top3 complex in the resolution of meiotic recombination intermediates.     

The N terminus of Saccharomyces cerevisiae Msh6 is an unstructured tether to PCNA

The eukaryotic MutS homolog complexes, Msh2-Msh6 and Msh2-Msh3, recognize mismatched bases in DNA during mismatch repair (MMR). The eukaryote-specific N-terminal regions (NTRs) of Msh6 and Msh3 have not been characterized other than by demonstrating that they contain an N-terminal PCNA-interacting motif. Here we have demonstrated genetically that the NTR of Msh6 has an important role in MMR that is partially redundant with PCNA binding. Small-angle X-ray scattering (SAXS) was used to determine the solution structure of the complex of PCNA with Msh2-Msh6 and with the isolated Msh6 NTR, revealing that the Msh6 NTR is a natively disordered domain that forms an extended tether between Msh6 and PCNA. Moreover, computational analysis of PCNA-interacting motifs in the S. cerevisiae proteome indicated that flexible linkers are a common theme for PCNA-interacting proteins that may serve to localize these binding partners without tightly restraining them to the immediate vicinity of PCNA.     

Functional Studies and Homology Modeling of Msh2-Msh3 Predict that Mispair Recognition Involves DNA Bending and Strand Separation

The Msh2-Msh3 heterodimer recognizes various DNA mispairs, including loops of DNA ranging from 1 to 14 nucleotides and some base-base mispairs. Homology modeling of the mispair-binding domain (MBD) of Msh3 using the related Msh6 MBD revealed that mismatch recognition must be different, even though the MBD folds must be similar. Model-based point mutation alleles of Saccharomyces cerevisiae msh3 designed to disrupt mispair recognition fell into two classes. One class caused defects in repair of both small and large insertion/deletion mispairs, whereas the second class caused defects only in the repair of small insertion/deletion mispairs; mutations of the first class also caused defects in the removal of nonhomologous tails present at the ends of double-strand breaks (DSBs) during DSB repair, whereas mutations of the second class did not cause defects in the removal of nonhomologous tails during DSB repair. Thus, recognition of small insertion/deletion mispairs by Msh3 appears to require a greater degree of interactions with the DNA conformations induced by small insertion/deletion mispairs than with those induced by large insertion/deletions that are intrinsically bent and strand separated. Mapping of the two classes of mutations onto the Msh3 MBD model appears to distinguish mispair recognition regions from DNA stabilization regions.The DNA mismatch repair (MMR) pathway recognizes and repairs mispaired and damaged bases in DNA, which primarily result from replication errors but which also result from recombination and chemical damage to DNA and DNA precursors (16, 22). Repairing mispairs improves the overall fidelity of DNA replication and is important for genome stability (24). Inherited defects in MMR are responsible for most cases of Lynch syndrome (hereditary nonpolyposis colorectal cancer [HNPCC]), and furthermore, the epigenetic silencing of one of the genes involved in MMR, MLH1, underlies most cases of sporadic MMR-defective cancer (19, 29).MMR is initiated by the recognition of base-base mismatches or insertion/deletion mispairs. In bacteria, the homodimeric MutS complex directly binds mispairs, bending the mispair-containing DNA by almost 60 degrees and shifting one of the mispaired bases, such as the thymidine base from G-T or +T mispairs, out of the DNA base stack (17). The mispaired base is stabilized by π stacking with a conserved phenylalanine (17, 26, 26a). DNA binding induces a functional asymmetry to the MutS complex; one subunit directly recognizes the mispair via a mispair-binding domain (MBD), whereas the MBD of the second subunit is primarily involved in nonspecific backbone interactions (17, 26a).In eukaryotes, mitotic MMR utilizes two heterodimeric complexes of MutS homologs: Msh2-Msh6 and Msh2-Msh3 (5, 16, 23, 41). In these asymmetric heterodimers, Msh6 and Msh3 directly recognize the mispair via their MBDs, whereas the Msh2 subunit appears to be functionally equivalent to the MutS subunit that nonspecifically binds the DNA backbone. In wild-type cells, the Msh2-Msh6 heterodimer is thought to primarily recognize and act in the repair of base-base mispairs and small 1- or 2-nucleotide insertion/deletions (12, 16, 20-24). The crystal structure of human Msh2-Msh6 revealed that mispair recognition by Msh6 shares many details with Escherichia coli MutS, including the π-stacking phenylalanine (17, 26a, 39). In contrast, in wild-type cells the Msh2-Msh3 heterodimer is thought to primarily recognize and act in the repair of insertions and deletions from 1 to 14 nucleotides in size (11, 20, 21, 27, 33, 37, 40), although we have previously shown that Msh2-Msh3 also recognizes some base-base mispairs with a preference for those that have weak hydrogen bonding (13). Msh2-Msh3 is also targeted to sites of DNA double-strand breaks (DSBs), potentially before a branched recombination intermediate is formed, where it acts in the processing of 3′ single-stranded tails (10, 28, 36).While no structural information for any Msh3 homolog is available, several lines of evidence suggest that mispairs are recognized by Msh2-Msh3 in a substantially different way than mispairs are recognized by MutS and Msh2-Msh6. First, Msh3 lacks the conserved π-stacking phenylalanine present in both MutS and Msh6, which is required for MMR by these proteins in vivo (9, 18). In contrast, mutagenesis of the Saccharomyces cerevisiae Msh3 residue located at the position equivalent to that of the phenylalanine conserved in MutS and Msh6 (K158, called K187 prior to the identification of the correct start codon [13]) caused only a modest MMR defect (18). Second, when other conserved residues and predicted DNA-backbone-contacting residues in S. cerevisiae Msh3 were mutated to alanine, only msh3-R247A (previously called msh3-R276A) caused a significant defect in the repair of 1-, 2-, and 4-nucleotide-long insertion/deletion mispairs (18).Despite these differences, the Msh3 MBD is likely related to the MBD of Msh6 and MutS. Replacement of the Msh6 MBD with the Msh3 MBD generated a functional chimera possessing Msh3 substrate specificity (32). Moreover, combining the msh3-K158A mutation with K160A gave rise to an msh3 mutant with an MMR defect greater than that for either single mutant alone (18). This double mutant caused a loss of specificity for mispaired DNA (18). Together these data indicate not only that mispair specificity is determined by the Msh3 MBD but also that the critical region of the Msh3 MBD mediating mispair recognition likely overlaps the same region as the MBDs of MutS and Msh6, even if the nature of the recognition is different. We have therefore used homology modeling and site-directed mutagenesis to gain insight into how Msh3 recognizes a diverse array of mispairs.     

Application of Stopped-flow Kinetics Methods to Investigate the Mechanism of Action of a DNA Repair Protein

Transient kinetic analysis is indispensable for understanding the workings of biological macromolecules, since this approach yields mechanistic information including active site concentrations and intrinsic rate constants that govern macromolecular function. In case of enzymes, for example, transient or pre-steady state measurements identify and characterize individual events in the reaction pathway, whereas steady state measurements only yield overall catalytic efficiency and specificity. Individual events such as protein-protein or protein-ligand interactions and rate-limiting conformational changes often occur in the millisecond timescale, and can be measured directly by stopped-flow and chemical-quench flow methods. Given an optical signal such as fluorescence, stopped-flow serves as a powerful and accessible tool for monitoring reaction progress from substrate binding to product release and catalytic turnover^1,2.Here, we report application of stopped-flow kinetics to probe the mechanism of action of Msh2-Msh6, a eukaryotic DNA repair protein that recognizes base-pair mismatches and insertion/deletion loops in DNA and signals mismatch repair (MMR)^3-5. In doing so, Msh2-Msh6 increases the accuracy of DNA replication by three orders of magnitude (error frequency decreases from ~10^-6 to10^-9 bases), and thus helps preserve genomic integrity. Not surprisingly, defective human Msh2-Msh6 function is associated with hereditary non-polyposis colon cancer and other sporadic cancers^6-8. In order to understand the mechanism of action of this critical DNA metabolic protein, we are probing the dynamics of Msh2-Msh6 interaction with mismatched DNA as well as the ATPase activity that fuels its actions in MMR. DNA binding is measured by rapidly mixing Msh2-Msh6 with DNA containing a 2-aminopurine (2-Ap) fluorophore adjacent to a G:T mismatch and monitoring the resulting increase in 2-aminopurine fluorescence in real time. DNA dissociation is measured by mixing pre-formed Msh2-Msh6 G:T(2-Ap) mismatch complex with unlabeled trap DNA and monitoring decrease in fluorescence over time⁹. Pre-steady state ATPase kinetics are measured by the change in fluorescence of 7-diethylamino-3-((((2-maleimidyl)ethyl)amino)carbonyl) coumarin)-labeled Phosphate Binding Protein (MDCC-PBP) on binding phosphate (Pi) released by Msh2-Msh6 following ATP hydrolysis^9,10.The data reveal rapid binding of Msh2-Msh6 to a G:T mismatch and formation of a long-lived Msh2-Msh6 G:T complex, which in turn results in suppression of ATP hydrolysis and stabilization of the protein in an ATP-bound form. The reaction kinetics provide clear support for the hypothesis that ATP-bound Msh2-Msh6 signals DNA repair on binding a mismatched base pair in the double helix.F. Noah Biro and Jie Zhai contributed to this paper equally.Download video file.^{(124M, mp4)}     

Regulation of Msh4-Msh5 association with meiotic chromosomes in budding yeast

In the baker’s yeast Saccharomyces cerevisiae, most of the meiotic crossovers are generated through a pathway involving the highly conserved mismatch repair related Msh4-Msh5 complex. To understand the role of Msh4-Msh5 in meiotic crossing over, we determined its genome wide in vivo binding sites in meiotic cells. We show that Msh5 specifically associates with DSB hotspots, chromosome axes, and centromeres on chromosomes. A basal level of Msh5 association with these chromosomal features is observed even in the absence of DSB formation (spo11Δ mutant) at the early stages of meiosis. But efficient binding to DSB hotspots and chromosome axes requires DSB formation and resection and is enhanced by double Holliday junction structures. Msh5 binding is also correlated to DSB frequency and enhanced on small chromosomes with higher DSB and crossover density. The axis protein Red1 is required for Msh5 association with the chromosome axes and DSB hotspots but not centromeres. Although binding sites of Msh5 and other pro-crossover factors like Zip3 show extensive overlap, Msh5 associates with centromeres independent of Zip3. These results on Msh5 localization in wild type and meiotic mutants have implications for how Msh4-Msh5 works with other pro-crossover factors to ensure crossover formation.     

Sensitivity to phosphonoacetic acid: a new phenotype to probe DNA polymerase delta in Saccharomyces cerevisiae

A mutant allele (pol3-L612M) of the DNA polymerase delta gene in Saccharomyces cerevisiae that confers sensitivity to the antiviral drug phosphonoacetic acid (PAA) was constructed. We report that PAA-sensitivity tagging DNA polymerases is a useful method for selectively and reversibly inhibiting one type of DNA polymerase. Our initial studies reveal that replication by the L612M-DNA pol delta requires Rad27 flap endonuclease activity since the pol3-L612M strain is not viable in the absence of RAD27 function. The L612M-DNA pol delta also strongly depends on mismatch repair (MMR). Reduced viability is observed in the absence of any of the core MMR proteins-Msh2, Mlh1, or Pms1-and severe sensitivity to PAA is observed in the absence of the core proteins Msh6 or Exo1, but not Msh3. We propose that pol3-L612M cells need the Rad27 flap endonuclease and MMR complexes composed of Msh2/Msh6, Mlh1/Pms1, and Exo1 for correct processing of Okazaki fragments.     

Meiotic recombination involving heterozygous large insertions in Saccharomyces cerevisiae: formation and repair of large, unpaired DNA loops

Meiotic recombination in Saccharomyces cerevisiae involves the formation of heteroduplexes, duplexes containing DNA strands derived from two different homologues. If the two strands of DNA differ by an insertion or deletion, the heteroduplex will contain an unpaired DNA loop. We found that unpaired loops as large as 5.6 kb can be accommodated within a heteroduplex. Repair of these loops involved the nucleotide excision repair (NER) enzymes Rad1p and Rad10p and the mismatch repair (MMR) proteins Msh2p and Msh3p, but not several other NER (Rad2p and Rad14p) and MMR (Msh4p, Msh6p, Mlh1p, Pms1p, Mlh2p, Mlh3p) proteins. Heteroduplexes were also formed with DNA strands derived from alleles containing two different large insertions, creating a large "bubble"; repair of this substrate was dependent on Rad1p. Although meiotic recombination events in yeast are initiated by double-strand DNA breaks (DSBs), we showed that DSBs occurring within heterozygous insertions do not stimulate interhomologue recombination.