Investigating the Dissolution Profiles of Amoxicillin,Metronidazole, and Zidovudine Formulations used in Trinidad and Tobago,West Indies

Trinidad and Tobago is a twin-island Republic in the Caribbean and like many developing countries, it has included generic drugs on the national drug formulary to decrease the financial burden of pharmaceutical medications. However, to ensure that medications received by patients are beneficial, generic drugs need to be interchangeable with the innovator which has demonstrated safety, efficacy, and quality. The objective of the study was to compare the dissolution profiles and weight variations for different formulations of amoxicillin, metronidazole, and zidovudine that are on the national drug formulary and marketed in Trinidad and Tobago. All the products investigated are categorized as class 1 drugs according to the Biopharmaceutics Classification System (BCS) and the dissolution profiles were assessed according to the World Health Organization (WHO) criteria for interchangeability between products. The similarity factor, f₂, was used to determine sameness between the products. No generic formulation was found to be similar to Amoxil® 500-mg capsules. The two generic products for metronidazole 200-mg tablets demonstrated more than 85% drug release within 15 min in all three of the buffers; however, their 400-mg counterparts did not fulfill this requirement. The zidovudine 300-mg tablet complied with the requirements in buffer pH 4.5 and simulated gastric fluid (SGF) but not for simulated intestinal fluid (SIF). Some Class 1 pharmaceutical formulations may possess the same active ingredient and amount of drug but may show significant differences to in vitro equivalence requirements. Nevertheless, the dissolution process is suitable to detect these variations.KEY WORDS: biopharmaceutics classification system, dissolution, generic drugs, interchangeability, in vitro equivalence     

Challenges and Opportunities to Use Biowaivers to Compare Generics in China

Biowaivers for class I drugs according to the biopharmaceutics classification system (BCS) were first introduced in 2000. The in vitro equivalence can be used to document bioequivalence between products. This study compared the in vitro dissolution behavior of two BCS class I drugs, amoxicillin and metronidazole, which are sold in China. Identifying a reference product on the Chinese domestic market was impossible. Three 250-mg and two 500-mg amoxicillin capsules and four metronidazole tablet products were tested. None of the amoxicillin products and three of the four metronidazole tablets were found to be equivalent to each other when the same strengths were compared. The bioequivalence of products that fail the in vitro test can be established via in vivo clinical studies which are expensive and time consuming. Establishing nationally or globally accepted reference products may provide regulatory agencies with an efficient mechanism approving high quality generics.     

An Investigation into the Influence of Experimental Conditions on In Vitro Drug Release from Immediate-Release Tablets of Levothyroxine Sodium and Its Relation to Oral Bioavailability

The aim of this study was to investigate the influence of experimental conditions on levothyroxine sodium release from two immediate-release tablet formulations which narrowly passed the standard requirements for bioequivalence studies. The in vivo study was conducted as randomised, single-dose, two-way cross-over pharmacokinetic study in 24 healthy subjects. The in vitro study was performed using various dissolution media, and obtained dissolution profiles were compared using the similarity factor value. Drug solubility in different media was also determined. The in vivo results showed narrowly passing bioequivalence. Considering that levothyroxine sodium is classified as Class III drug according to the Biopharmaceutics Classification System, drug bioavailability will be less sensitive to the variation in its dissolution characteristics and it can be assumed that the differences observed in vitro in some of investigated media probably do not have significant influence on the absorption process, as long as rapid and complete dissolution exists. The study results indicate that the current regulatory criteria for the value of similarity factor in comparative dissolution testing, as well as request for very rapid dissolution (more than 85% of drug dissolved in 15 min), are very restricted for immediate-release dosage forms containing highly soluble drug substance and need further investigation. The obtained results also add to the existing debate on the appropriateness of the current bioequivalence standards for levothyroxine sodium products.KEY WORDS: bioequivalence, dissolution, immediate release, levothyroxine sodium, solubility     

Application of Absorption Modeling to Predict Bioequivalence Outcome of Two Batches of Etoricoxib Tablets

As part of the overall product development and manufacturing strategy, pharmaceutical companies routinely change formulation and manufacturing site. Depending on the type and level of change and the BCS class of the molecule, dissolution data and/or bioequivalence (BE) may be needed to support the change for immediate release dosage forms. In this report, we demonstrate that for certain weakly basic low-solubility molecules which rapidly dissolve in the stomach, absorption modeling could be used to justify a BE study waiver even when there is failure to show dissolution similarity under some conditions. The development of an absorption model for etoricoxib is described here, which was then used to a priori predict the BE outcome of tablet batches manufactured at two sites. Dissolution studies in 0.01 N HCl media (pH 2.0) had demonstrated similarity of etoricoxib tablets manufactured at two different sites. However, dissolution testing at pH 4.5 and pH 6.8 media failed to show comparability of the tablets manufactured at the two sites. Single simulations and virtual trials conducted using the 0.01 N HCl dissolution showed similarity in AUC and C_max for all tablet strengths for batches manufactured at the two manufacturing sites. These predicted results were verified in a definitive bioequivalence study, which showed that both tablet batches were bioequivalent. Since the development of traditional in vitro–in vivo correlations (IVIVC) for immediate release (IR) products is challenging, in cases such as etoricoxib, absorption modeling could be used as an alternative to support waiver of a BE study.KEY WORDS: bioequivalence, dissolution, modeling, pharmacokinetics, SUPAC     

An Investigation into the Influence of Experimental Conditions on <Emphasis Type="Italic">In Vitro</Emphasis> Drug Release from Immediate-Release Tablets of Levothyroxine Sodium and Its Relation to Oral Bioavailability

The aim of this study was to investigate the influence of experimental conditions on levothyroxine sodium release from two immediate-release tablet formulations which narrowly passed the standard requirements for bioequivalence studies. The in vivo study was conducted as randomised, single-dose, two-way cross-over pharmacokinetic study in 24 healthy subjects. The in vitro study was performed using various dissolution media, and obtained dissolution profiles were compared using the similarity factor value. Drug solubility in different media was also determined. The in vivo results showed narrowly passing bioequivalence. Considering that levothyroxine sodium is classified as Class III drug according to the Biopharmaceutics Classification System, drug bioavailability will be less sensitive to the variation in its dissolution characteristics and it can be assumed that the differences observed in vitro in some of investigated media probably do not have significant influence on the absorption process, as long as rapid and complete dissolution exists. The study results indicate that the current regulatory criteria for the value of similarity factor in comparative dissolution testing, as well as request for very rapid dissolution (more than 85% of drug dissolved in 15 min), are very restricted for immediate-release dosage forms containing highly soluble drug substance and need further investigation. The obtained results also add to the existing debate on the appropriateness of the current bioequivalence standards for levothyroxine sodium products.     

Biopharmaceutics Classification System-Based Biowaivers for Generic Oncology Drug Products: Case Studies

Establishing bioequivalence (BE) of drugs indicated to treat cancer poses special challenges. For ethical reasons, often, the studies need to be conducted in cancer patients rather than in healthy volunteers, especially when the drug is cytotoxic. The Biopharmaceutics Classification System (BCS) introduced by Amidon (1) and adopted by the FDA, presents opportunities to avoid conducting the bioequivalence studies in humans. This paper analyzes the application of the BCS approach by the generic pharmaceutical industry and the FDA to oncology drug products. To date, the FDA has granted BCS-based biowaivers for several drug products involving at least four different drug substances, used to treat cancer. Compared to in vivo BE studies, development of data to justify BCS waivers is considered somewhat easier, faster, and more cost effective. However, the FDA experience shows that the approval times for applications containing in vitro studies to support the BCS-based biowaivers are often as long as the applications containing in vivo BE studies, primarily because of inadequate information in the submissions. This paper deliberates some common causes for the delays in the approval of applications requesting BCS-based biowaivers for oncology drug products. Scientific considerations of conducting a non-BCS-based in vivo BE study for generic oncology drug products are also discussed. It is hoped that the information provided in our study would help the applicants to improve the quality of ANDA submissions in the future.KEY WORDS: Biopharmaceutics Classification System, bioequivalence, biowaiver, cancer, oncology     

New Approach for the Application of USP Apparatus 3 in Dissolution Tests: Case Studies of Three Antihypertensive Immediate-Release Tablets

The USP Apparatus 3 is a compendial dissolution Apparatus that has been mainly used to assess the performance of modified-release drug products. However, this Apparatus can be applied to dissolution testing of immediate-release tablets as well, with several advantages such as lower consumption of dissolution media, reduced setup time in quality control routine, and minimized hydrodynamic issues. In this work, three immediate-release (IR) tablets containing antihypertensive drugs of different Biopharmaceutic Classification System (BCS) classes were evaluated in order to assess the possible interchangeability between the official dissolution method using typical USP Apparatus 1 or 2 and the proposed methods using USP Apparatus 3. Depending on the selection of the appropriate operational conditions, such as dip rate and sieve mesh size, it was observed that USP Apparatus 3 could provide similar dissolution profiles compared to USP Apparatus 1 or 2 to the drug products tested. In addition, USP Apparatus 3 avoided conning issues related to USP Apparatus 2. The successful application of USP Apparatus 3 in dissolution tests for IR drug products depends on the definition of specific test conditions for each product, considering all the equipment variables, as well as drug and formulation characteristics.     

Biowaiver or Bioequivalence: Ambiguity in Sildenafil Citrate BCS Classification

The aim of the present study is to contribute to the scientific characterization of sildenafil citrate according to the Biopharmaceutics Classification System, following the World Health Organization (WHO) guidelines for biowaivers. The solubility and intestinal permeability data of sildenafil citrate were collected from literature; however, the experimental solubility studies are inconclusive and its “high permeability” suggests an API in the borderline of BCS Class I and Class II. The pH-solubility profile was determined using the saturation shake-flask method over the pH range of 1.2–6.8 at a temperature of 37 °C in aqueous media. The intestinal permeability was determined in rat by a closed-loop in situ perfusion method (the Doluisio technique). The solubility of sildenafil citrate is pH-dependent and at pH 6.8 the dose/solubility ratio obtained does not meet the WHO criteria for “high solubility.” The high permeability values obtained by in situ intestinal perfusion in rat reinforce the published permeability data for sildenafil citrate. The experimental results obtained and the data available in the literature suggest that sildenafil citrate is clearly a Class II of BCS, according to the current biopharmaceutics classification system and WHO guidance.     

Determining the Polymer Threshold Amount for Achieving Robust Drug Release from HPMC and HPC Matrix Tablets Containing a High-Dose BCS Class I Model Drug: In Vitro and In Vivo Studies

It is challenging to achieve mechanically robust drug-release profiles from hydrophilic matrices containing a high dose of a drug with good solubility. However, a mechanically robust drug release over prolonged period of time can be achieved, especially if the viscosity and amount of the polymer is sufficiently high, above the “threshold values.” The goal of this research was to determine the hydroxypropyl cellulose (HPC) and hydroxypropyl methylcellulose (HPMC) polymer threshold amount that would enable robust drug release from matrix tablets containing a high dose of levetiracetam as a class I model drug according to the Biopharmaceutical Classification System (BCS). For this purpose, formulations containing HPC or HPMC of similar viscosity range, but in different amounts, were prepared. Based on the dissolution results, two final formulations were selected for additional in vitro and in vivo evaluation to confirm the robustness and to show bioequivalence. Tablets were exposed to various stress conditions in vitro with the use of different mechanically stress-inducing dissolution methods. The in vitro results were compared with in vivo results obtained from fasted and fed bioequivalence studies. Under both conditions, the formulations were bioequivalent and food had a negligible influence on the pharmacokinetic parameters C_max and area under the curve (AUC). It was concluded that the drug release from both selected formulations is mechanically robust and that HPC and HPMC polymers with intrinsic viscosities above 9 dL/g and in quantities above 30% enable good mechanical resistance, which ensures bioequivalence. In addition, HPC matrices were found to be more mechanically robust compared to HPMC.KEY WORDS: HPC, HPMC, matrix tablets, mechanically robust dissolution, threshold amount     

Comparison of In Vitro Release Rates of Acyclovir from Cream Formulations Using Vertical Diffusion Cells

Acyclovir, indicated in the treatment of herpes labialis (“cold sores”), is formulated as semisolid topical dosage forms and marketed in numerous countries. Since the formulations of the various acyclovir products may differ from country to country, this study was undertaken to compare the in vitro release of acyclovir from various generic cream products available on the South African and Indian markets using the respective brand/innovator product as the reference product. The in vitro studies were carried out using vertical diffusion cells with a diffusional surface area of 1.767 cm² and various commercially available membranes. Normal saline was used as receptor fluid and the temperature maintained at 32 ± 0.5°C. The in vitro release comparisons were based on the recommendations described in the US Food and Drug Administration Draft Guidance for acyclovir ointment and the SUPAC-SS Guidance for non-sterile semisolid dosage forms. The release rates (slope) of the test (T) and the relevant reference product (R) were monitored and compared. The comparative release of acyclovir from the various generic formulations compared with the reference product was found to be within the limits of 75–133.33% with a 90% confidence interval. These experiments indicate that the generic acyclovir cream formulations exhibited release rates that were comparable to the innovator product and could be considered to be bioequivalent.KEY WORDS: acyclovir cream, FDA Guidance, in vitro release, membranes, vertical diffusion cells     

A Randomized Clinical Trial to Determine the Efficacy of Regimens Containing Clarithromycin, Metronidazole, and Amoxicillin Among Histologic Subgroups for Helicobacter pylori Eradication in a Developing Country

Background: Most treatments deemed effective for Helicobacter pylori eradication in developed countries are less effective in developing countries. Regimens containing clarithromycin, metronidazole, and amoxicillin seem efficacious despite antibiotic resistance, and may be a viable option in developing countries. Materials and Methods: We evaluated the efficacy of a 14‐day regimen with 500 mg clarithromycin b.i.d., 500 mg metronidazole t.i.d., and 500 mg amoxicillin t.i.d. (with and without a proton pump inhibitor), and a 10‐day regimen containing 500 mg clarithromycin b.i.d., 1 g amoxicillin b.i.d., and 20 mg omeprazole b.i.d. in Pasto, Colombia, using a randomized, single‐blind design stratified by presence of atrophic gastritis. Results: H. pylori was eradicated in 86.8% and 85.3% of the participants randomized to a clarithromycin‐metronidazole‐amoxicillin and clarithromycin‐amoxicillin‐omeprazole regimens, respectively (p = .79). Per‐protocol analyses indicated greater efficacy for the clarithromycin‐metronidazole‐amoxicillin regimen (97%) versus the clarithromycin‐amoxicillin‐omeprazole regimen (86%) (p = .04), particularly for participants with atrophic gastritis (clarithromycin‐metronidazole‐amoxicillin = 100%, clarithromycin‐amoxicillin‐omeprazole = 81%; p = .02). Adverse events were mild, but adverse event‐related non‐compliance was reported more often for regimens containing clarithromycin, metronidazole, and amoxicillin. Conclusions: Our results suggest that an eradication rate of > 85% can be achieved with 14‐day clarithromycin, metronidazole, and amoxicillin and 10‐day clarithromycin, amoxicillin, and omeprazole regimens in Pasto, Colombia. The regimens containing clarithromycin, metronidazole, and amoxicillin appear to be superior to the clarithromycin, amoxicillin, and omeprazole regimen for compliant participants and those with atrophic gastritis. Our findings provide treatment options for a population in a developing country with a high prevalence of H. pylori infections and antibiotic resistance.     

In Vitro–In Vivo Correlation of Efavirenz Tablets Using GastroPlus®

The aim of the present work was to use GastroPlus™ software for the prediction of pharmacokinetic profiles and in vitro–in vivo correlation (IVIVC) as tools to optimize the development of new generic medications. GastroPlus™ was used to simulate the gastrointestinal compartment and was based on the advanced compartmental absorption and transit model. Powder dissolution and efavirenz tablet dissolution studies were carried out to generate data from which correlation was established. The simulated plasma profile, based on the physicochemical properties of efavirenz, was almost identical to that observed in vivo for biobatches A and B. A level A IVIVC was established for the dissolution method obtained for the generic candidate using the Wagner–Nelson (r² = 0.85) and for Loo–Riegelman models (r² = 0.92). The percentage of fraction absorbed indicated that 0.5% sodium lauryl sulfate may be considered a biorelevant dissolution medium for efavirenz tablets. The simulation of gastrointestinal bioavailability and IVIVC obtained from immediate-release tablet formulations suggests that GastroPlus™ is a valuable in silico method for IVIVC and for studies directed at developing formulations of class II drugs.KEY WORDS: bioavailability, computational simulation, efavirenz, GastroPlus™, in vivo–in vitro correlation     

Development and Validation of a Discriminative Dissolution Method for Atorvastatin Calcium Tablets using in vivo Data by LC and UV Methods

A dissolution method to analyze atorvastatin tablets using in vivo data for RP and test pilot (PB) was developed and validated. The appropriate conditions were determined after solubility tests using different media, and sink conditions were established. The conditions used were equipment paddle at 50 rpm and 900 mL of potassium phosphate buffer pH 6.0 as dissolution medium. In vivo release profiles were obtained from the bioequivalence study of RP and the generic candidate PB. The fraction of dose absorbed was calculated using the Loo–Riegelman method. It was necessary to use a scale factor of time similar to 6.0, to associate the values of absorbed fraction and dissolved fraction, obtaining an in vivo–in vitro correlation level A. The dissolution method to quantify the amount of drug dissolved was validated using high-performance liquid chromatography and ultraviolet spectrophotometry, and validated according to the USP protocol. The discriminative power of dissolution conditions was assessed using two different pilot batches of atorvastatin tablets (PA and PB) and RP. The dissolution test was validated and may be used as a discriminating method in quality control and in the development of the new formulations.     

Effect of Stearic Acid on Enalapril Stability and Dissolution from Multiparticulate Solid Dosage Forms

Enalapril maleate (EM) is a widely used anti-hypertensive drug which is unstable when mixed with excipients. Enalaprilate and diketopiperazine (DPK) are the main degradation products of enalapril. The in situ preparation of enalapril sodium salt (NaE) has been used to improve drug stability in dosage forms; however, gas release and product rejection ensue when the chemical reaction for obtaining the sodium salt is not completely finished before packaging. This study evaluated the effect of stearic acid (SA) on enalapril stability in microcrystalline cellulose (MCC) pellets containing EM or NaE. MCC pellets containing SA were prepared by the extrusion–spheronization technique and characterized. Enalapril stability and dissolution were then evaluated. DPK and enalaprilate formation were reduced by the addition of SA in pellets containing EM. The overall enalapril degradation in these formulations was lower when compared with pellets containing EM or even NaE prepared without SA. The immediate-release characteristic was maintained by the addition of 5% crospovidone to all the formulations tested. The incorporation of SA into NaE pellets resulted in unexpected enalapril degradation, caused by the interaction of these compounds, as suggested by a thermal analysis of the SA–NaE binary mixture. The findings presented here showed that formulations containing SA could substitute the formation of NaE, since they provide better enalapril stability in solid dosage forms. In addition, it is suggested that the stabilization effects would be observed for other N-carboxyalkyl dipeptide analogs with angiotensin converting enzyme inhibition activity, since these new entities share the same degradation pathway of enalapril.     

Antibiotic resistance of Helicobacter pylori in Mazandaran, North of Iran

Background: The aim of this study was to investigate the prevalence of resistances in Helicobacter pylori against commonly used antibiotics including metronidazole, clarithromycin, amoxicillin, and tetracycline in Iranian patients. Methods: H. pylori isolates were collected from gastric biopsies from patients referred for upper gastrointestinal endoscopy at Tooba Medical Center, Sari, Iran, from 2007 to 2010. None of them had been using antibiotics for at least 8 months. H. pylori was identified based on morphological shape and positive biochemical tests for catalase, oxidase, and urease activity. Antibiotic resistance for metronidazole, clarithromycin, amoxicillin, and tetracycline was investigated by using epsilometer test. Resistance was defined by minimal inhibitory concentration (MIC) > 0.5 mg/L for amoxicillin (AMX), >4 mg/L for tetracycline (TET), >8 mg/L for metronidazole (MTZ), and >1 mg/L for clarithromycin (CLR). Results: Strains were collected from 132 patients, mean age 45.8 years, 52 (39%) were women. Patients had diverse diagnoses: gastritis 42 (31.8%), duodenal ulcer 45 (34%), gastric cancer 15 (11.3%), or gastric ulcer 30 (22.7%). The prevalences of resistance of H. pylori strains isolated from the patients were 73.4% for metronidazole, 30% for clarithromycin, 6.8% for amoxicillin, and 9% for tetracycline. Twenty‐eight (21.2%) were double resistant to MTZ‐CLR, 16 (12.1%) showed triple resistance to MTZ‐CLR‐AMX, and 8 (6%) were resistant to all four tested antibiotics (MTZ‐CLR‐AMX‐TET). No associations were detected between multiple resistant strains and clinical manifestations (p > .05). Conclusions: The prevalence of H. pylori antibiotic resistance to metronidazole and clarithromycin was high in Iran consistent with the reported low success rates for H. pylori treatment in this country.     

Quality of reporting of bioequivalence trials comparing generic to brand name drugs: a methodological systematic review

Background

Generic drugs are used by millions of patients for economic reasons, so their evaluation must be highly transparent.

Objective

To assess the quality of reporting of bioequivalence trials comparing generic to brand-name drugs.

Methodology/Principal Findings

PubMed was searched for reports of bioequivalence trials comparing generic to brand-name drugs between January 2005 and December 2008. Articles were included if the aim of the study was to assess the bioequivalency of generic and brand-name drugs. We excluded case studies, pharmaco-economic evaluations, and validation dosage assays of drugs. We evaluated whether important information about funding, methodology, location of trials, and participants were reported. We also assessed whether the criteria required by the Food and Drug Administration (FDA) and the European Medicine Agency (EMA) to conclude bioequivalence were reported and that the conclusions were in agreement with the results. We identified 134 potentially relevant articles but eliminated 55 because the brand-name or generic drug status of the reference drug was unknown. Thus, we evaluated 79 articles. The funding source and location of the trial were reported in 41% and 56% of articles, respectively. The type of statistical analysis was reported in 94% of articles, but the methods to generate the randomization sequence and to conceal allocation were reported in only 15% and 5%, respectively. In total, 65 articles of single-dose trials (89%) concluded bioequivalence. Of these, 20 (31%) did not report the 3 criteria within the limits required by the FDA and 11 (17%) did not report the 2 criteria within the limits required by the EMA.

Conclusions/Significance

Important information to judge the validity and relevance of results are frequently missing in published reports of trials assessing generic drugs. The quality of reporting of such trials is in need of improvement.     

The Biopharmaceutical Properties of Solid Dosage Forms: I. An Evaluation of 23 Brands of Phenylbutazone Tablets

The potency, disintegration and dissolution characteristics of 23 brands of phenylbutazone tablets were determined. Five (21.7%) of the 23 brands failed to comply with the minimum requirements of the compendia or the regulations appended to the Food and Drugs Act. The in vitro characteristics of four brands were substantially different from those that disintegrated and released the drug satisfactorily. The in vivo characteristics of three of the four brands were compared with those observed for a pharmaceutically acceptable product. The latter product released the drug to the blood quickly, but the former products released the drug only after the tablets had been in the body for six to eight hours and, in the case of one product, released quantities much below those that would be acceptable to the physician. These results show that different products containing the same drug are not necessarily equivalent. This is contrary to the generic equivalency hypothesis which assumes that all products comply with specifications and, therefore, must be clinically effective.     

Experimental dissolution of a fossil foraminiferal assemblage (Paleocene–Eocene Thermal Maximum,Dababiya, Egypt): Implications for paleoenvironmental reconstructions

Dissolution experiments were carried out on a foraminiferal assemblage from the Paleocene–Eocene Thermal Maximum (PETM) at Dababiya, Egypt, in order to: 1) reveal the effects of differential dissolution on the composition of the foraminiferal assemblage and 2) develop objective criteria for the evaluation of dissolution in foraminiferal assemblages used in early Paleogene paleoenvironmental reconstructions, particularly with respect to neritic Midway-type assemblages from the Paleocene/Eocene transition. Our results confirm two general observations on modern foraminifera: 1) planktic foraminifera are much more vulnerable to dissolution than benthic foraminifera, leading to depressed P/B ratios and 2) dissolution susceptibility differs between size fractions, with the smaller specimens dissolving more rapidly than the bigger ones, leading to a larger average size of the remaining assemblage. Within a size fraction, wall structure and thickness are considered to be the main factors controlling differential dissolution susceptibility. We propose a ranking scheme for taxa with respect to dissolution resistance. Among the benthic taxa, Lenticulina is most resistant, followed by the agglutinated Gaudryina cf. ellisorae and Alabamina midwayensis. Biserial and triserial hyaline taxa and the porcelaneous Spiroloculina sp. are most susceptible to dissolution, whereas rotaliines, such as Cibicidoides and Anomalinoides have an intermediate susceptibility. This implies that mild dissolution of a Midway-type benthic assemblage leads to a relative enrichment in Lenticulina, Gaudryina and rotaliines. Amongst planktic foraminifera, the muricate taxa Acarinina and Morozovella are most resistant, followed by the cancellate Subbotina. The smooth and generally small Globanomalina and Zeauvigerina are least resistant to dissolution. Our data enable to objectively evaluate various degrees of dissolution in benthic and planktic foraminiferal assemblages retrieved from the lower Paleogene Tethyan outcrops. In this way taphonomic artifacts can be readily distinguished from paleoenvironmental signals affecting the primary composition of the assemblages. More generally, we propose that the combined use of foraminiferal numbers, P/B ratio and relative abundances of non-calcareous agglutinated taxa and Lenticulina may provide a powerful proxy for assessing dissolution in hemipelagic assemblages from Cenozoic and upper Cretaceous continental margins. In order to achieve more robust pre-Quaternary paleoenvironmental reconstructions based on quantitative foraminiferal data, application of dissolution proxies, like proposed here, or in slightly modified form, should become a more widely used micropaleontologic procedure. Particularly continental margin studies dealing with major biotic events (e.g. PETM) or employing P/B ratios for sea-level reconstructions should benefit from such an approach.     

Simulation of In Vitro Dissolution Behavior Using DDDPlus?

Dissolution testing is a performance test for many dosage forms including tablets and capsules. The objective of this study was to evaluate if computer simulations can predict the in vitro dissolution of two model drugs for which different dissolution data were available. Published montelukast sodium and glyburide dissolution data was used for the simulations. Different pharmacopeial and biorelevant buffers, volumes, and rotations speeds were evaluated. Additionally, a pH change protocol was evaluated using these buffers. DDDPlus™ 3, Beta version (Simulation Plus, Inc.), was used to simulate the in vitro dissolution data. The simulated data were compared with the in vitro data. A regression coefficient between predicted and observed data was used to assess the simulations. The statistical analysis of Montelukast sodium showed that there was a significant correlation between the in vitro release data and the predicted data for all cases except for one buffer. For glyburide, there was also a significant correlation between the experimental data and the predicted data using single pH conditions. Using the dynamic pH protocol, a correlation was significant for one biorelevant media. The simulations showed that both in vitro drug releases were sensitive to solubility effects which confirmed their BCS class II category. Computer simulations of the in vitro release using DDDPlus™ have the potential to estimate the in vivo dissolution at an early stage in the drug development process. This might be used to choose the most appropriate dissolution condition to establish IVIVC and to develop biorelevant in vitro performance tests to capture critical product attributes for quality control procedures in quality by design environments.KEY WORDS: biorelevant media, DDDPlus, dissolution testing, QbD, QC     

Enzymes in the Dissolution Testing of Gelatin Capsules

Gelatin capsules are a widely used dosage form both for pharmaceutical drug products as well as dietary supplements. Gelatin in the presence of certain compounds, mainly aldehydes, or in high humidity and high temperature conditions can cross-link. Cross-linking involves covalent bonding of the amine group of a lysine side chain of one gelatin molecule to a similar amine group on another molecule. The covalent bonding is, for practical purposes, irreversible. Cross-linking results in the formation of a pellicle on the internal or external surface of the gelatin capsule shell that prevents the capsule fill from being released. In vitro dissolution testing of cross-linked gelatin capsules can result in slower release of the drug or no release at all. The data obtained by the Gelatin Capsule Working Group, created in the early 90s to investigate noncompliance of gelatin capsules, was used to establish the type and amounts of enzymes that can be added to the dissolution medium in the case of test failure to the presence of cross-linking in the gelatin. The two-tier dissolution testing was included in the US Pharmacopeia and it recommends the addition of pepsin (pH below 6.8) or pancreatin (pH above 6.8) to the medium depending on its pH. Pepsin shows good protease activity up to pH 4 and pancreatin above pH 6 leaving a gap where neither one has good activity. Possible proteolytic enzymes that could be used for the pH range 4–6.8 could be papain or bromelain.KEY WORDS: cross linking, gelatin capsules, two-tier dissolution testing