MSCs在自组装多肽纳米纤维支架中的三维培养及脂向分化研究

拟采用自组装多肽RADA16水凝胶建市MSCs的三维培养体系,以观察MSCs在RADA16中的黏附、形态及脂向分化情况.将第3代细胞置于RADA16水凝胶中进行三维培养.实验组细胞-材料复合物以脂向诱导液诱导,对照组以DMEM培养液培养,然后进行形态学观察,油红O染色及Western blot检测.荧光染色显示,绝大多数MSCs在RADA16水凝胶中能存活,且在不同的三维平面上生长.经诱导后,细胞内有大量油红O染色阳性的脂滴聚集,Western blot分析结果显示有脂肪细胞特异的蛋白PPARγ表达,且表达量随诱导时间的延长而增加.以上结果表明,RADA16水凝胶支架为MSCs的黏附、生长提供良好的三维环境,经定向诱导后支架内的MSCs可向脂肪组织方向分化.     

Improvement of neural stem cell survival in collagen hydrogels by incorporating laminin-derived cell adhesive polypeptides

Cell transplantation is a potential methodology for the treatment of Parkinson's disease. However, the therapeutic effect is limited by poor viability of transplanted cells. To overcome this problem, we hypothesized that a dual step approach, whereby providing an adhesive substrate for transplanted cells and, at the same time, by preventing the infiltration of activated microglia into the site of transplantation promotes the cell survival. To establish above conditions, attempts were made to prepare 3-D matrices using collagen hydrogels that incorporated integrin-binding polypeptides derived from laminin-1. Tandem combinations of laminin globular domains as well as a single globular domain 3 were prepared using recombinant DNA technology as a fusion with hexahistidine and bound to metal chelated surfaces to screen for the adhesion and proliferation of neural stem cells (NSCs). In addition, a small peptide derived from laminin γ1 chain was prepared and heterodimerized with the globular domain-containing chimeric proteins to evaluate for the enhancement of integrin-mediated cell adhesion. As a result, a heterodimer consisting of the globular domain 3 of the laminin α1 chain and the peptide from the laminin γ1 chain was selected as the best candidate among the polypeptides studied here for the incorporation into a collagen hydrogel. It was shown that the survival of NSCs was indeed promoted in the collagen hydrogel incorporating the heterodimer compared to the pure collagen hydrogel.     

Biological designer self-assembling peptide nanofiber scaffolds significantly enhance osteoblast proliferation, differentiation and 3-D migration

A class of self-assembling peptide nanofiber scaffolds has been shown to be an excellent biological material for 3-dimension cell culture and stimulating cell migration into the scaffold, as well as for repairing tissue defects in animals. We report here the development of several peptide nanofiber scaffolds designed specifically for osteoblasts. We designed one of the pure self-assembling peptide scaffolds RADA16-I through direct coupling to short biologically active motifs. The motifs included osteogenic growth peptide ALK (ALKRQGRTLYGF) bone-cell secreted-signal peptide, osteopontin cell adhesion motif DGR (DGRGDSVAYG) and 2-unit RGD binding sequence PGR (PRGDSGYRGDS). We made the new peptide scaffolds by mixing the pure RAD16 and designer-peptide solutions, and we examined the molecular integration of the mixed nanofiber scaffolds using AFM. Compared to pure RAD16 scaffold, we found that these designer peptide scaffolds significantly promoted mouse pre-osteoblast MC3T3-E1 cell proliferation. Moreover, alkaline phosphatase (ALP) activity and osteocalcin secretion, which are early and late markers for osteoblastic differentiation, were also significantly increased. We demonstrated that the designer, self-assembling peptide scaffolds promoted the proliferation and osteogenic differentiation of MC3T3-E1. Under the identical culture medium condition, confocal images unequivocally demonstrated that the designer PRG peptide scaffold stimulated cell migration into the 3-D scaffold. Our results suggest that these designer peptide scaffolds may be very useful for promoting bone tissue regeneration.     

Peptide Hydrogelation and Cell Encapsulation for 3D Culture of MCF-7 Breast Cancer Cells

Three-dimensional (3D) cell culture plays an invaluable role in tumor biology by providing in vivo like microenviroment and responses to therapeutic agents. Among many established 3D scaffolds, hydrogels demonstrate a distinct property as matrics for 3D cell culture. Most of the existing pre-gel solutions are limited under physiological conditions such as undesirable pH or temperature. Here, we report a peptide hydrogel that shows superior physiological properties as an in vitro matrix for 3D cell culture. The 3D matrix can be accomplished by mixing a self-assembling peptide directly with a cell culture medium without any pH or temperature adjustment. Results of dynamic rheological studies showed that this hydrogel can be delivered multiple times via pipetting without permanently destroying the hydrogel architecture, indicating the deformability and remodeling ability of the hydrogel. Human epithelial cancer cells, MCF-7, are encapsulated homogeneously in the hydrogel matrix during hydrogelation. Compared with two-dimensional (2D) monolayer culture, cells residing in the hydrogel matrix grow as tumor-like clusters in 3D formation. Relevant parameters related to cell morphology, survival, proliferation, and apoptosis were analyzed using MCF-7 cells in 3D hydrogels. Interestingly, treatment of cisplatin, an anti-cancer drug, can cause a significant decrease of cell viability of MCF-7 clusters in hydrogels. The responses to cisplatin were dose- and time-dependent, indicating the potential usage of hydrogels for drug testing. Results of confocal microscopy and Western blotting showed that cells isolated from hydrogels are suitable for downstream proteomic analysis. The results provided evidence that this peptide hydrogel is a promising 3D cell culture material for drug testing.     

The Neutral Self-Assembling Peptide Hydrogel SPG-178 as a Topical Hemostatic Agent

Conventional self-assembling peptide hydrogels are effective as topical hemostatic agents. However, there is a possibility to harm living tissues due to their low pH. The aim of the present study was to demonstrate the efficacy of SPG-178, a neutral self-assembling peptide hydrogel, as a topical hemostatic agent. First, we measured the bleeding duration of incisions made on rat livers after application of SPG-178 (1.0% w/v), SPG-178 (1.5% w/v), RADA16 (1.0% w/v), and saline (n = 12/group). Second, we observed the bleeding surfaces by transmission electron microscopy immediately after hemostasis. Third, we measured the elastic and viscous responses (G′ and G″, respectively) of the hydrogels using a rheometer. Our results showed that bleeding duration was significantly shorter in the SPG-178 group than in the RADA16 group and that there were no significant differences in transmission electron microscopy findings between the groups. The greater the G′ value of a hydrogel, the shorter was the bleeding duration. We concluded that SPG-178 is more effective and has several advantages: it is non-biological, transparent, nonadherent, and neutral and can be sterilized by autoclaving.     

Significant Type I and Type III Collagen Production from Human Periodontal Ligament Fibroblasts in 3D Peptide Scaffolds without Extra Growth Factors

We here report the development of two peptide scaffolds designed for periodontal ligament fibroblasts. The scaffolds consist of one of the pure self-assembling peptide scaffolds RADA16 through direct coupling to short biologically active motifs. The motifs are 2-unit RGD binding sequence PRG (PRGDSGYRGDS) and laminin cell adhesion motif PDS (PDSGR). RGD and laminin have been previously shown to promote specific biological activities including periodontal ligament fibroblasts adhesion, proliferation and protein production. Compared to the pure RADA16 peptide scaffold, we here show that these designer peptide scaffolds significantly promote human periodontal ligament fibroblasts to proliferate and migrate into the scaffolds (for ∼300 µm/two weeks). Moreover these peptide scaffolds significantly stimulated periodontal ligament fibroblasts to produce extracellular matrix proteins without using extra additional growth factors. Immunofluorescent images clearly demonstrated that the peptide scaffolds were almost completely covered with type I and type III collagens which were main protein components of periodontal ligament. Our results suggest that these designer self-assembling peptide nanofiber scaffolds may be useful for promoting wound healing and especially periodontal ligament tissue regeneration.     

Three‐dimensional nanocharacterization of porous hydrogel with ion and electron beams

Porous hydrogels provide an excellent environment for cell growth and tissue regeneration, with high permeability for oxygen, nutrients, and other water‐soluble metabolites through their high water‐content matrix. The ability to image three‐dimensional (3D) cell growth is crucial for understanding and studying various cellular activities in 3D context, particularly for designing new tissue engineering scaffold, but it is still challenging to study cell‐biomaterial interfaces with high resolution imaging. We demonstrate using focused ion beam (FIB) milling, electron imaging, and associated microanalysis techniques that novel 3D characterizations can be performed effectively on cells growing inside 3D hydrogel scaffold. With FIB‐tomography, the porous microstructures were revealed at nanometer resolution, and the cells grown inside. The results provide a unique 3D measurement of hydrogel porosity, as compared with those from porosimetry, and offer crucial insights into material factors affecting cell proliferation at specific regions within the scaffold. We also proved that high throughput correlative imaging of cell growth is viable through a silicon membrane based environment. The proposed approaches, together with the protocols developed, provide a unique platform for analysis of the microstructures of novel biomaterials, and for exploration of their interactions with the cells as well. Biotechnol. Bioeng. 2013; 110: 318–326. © 2012 Wiley Periodicals, Inc.     

Hydrolytically degradable poly(ethylene glycol) hydrogel scaffolds as a cell delivery vehicle: Characterization of PC12 cell response

The central nervous system (CNS) has a low intrinsic potential for regeneration following injury and disease, yet neural stem/progenitor cell (NPC) transplants show promise to provide a dynamic therapeutic in this complex tissue environment. Moreover, biomaterial scaffolds may improve the success of NPC‐based therapeutics by promoting cell viability and guiding cell response. We hypothesized that a hydrogel scaffold could provide a temporary neurogenic environment that supports cell survival during encapsulation, and degrades completely in a temporally controlled manner to allow progression of dynamic cellular processes such as neurite extension. We utilized PC12 cells as a model cell line with an inducible neuronal phenotype to define key properties of hydrolytically degradable poly(ethylene glycol) hydrogel scaffolds that impact cell viability and differentiation following release from the degraded hydrogel. Adhesive peptide ligands (RGDS, IKVAV, or YIGSR), were required to maintain cell viability during encapsulation; as compared to YIGSR, the RGDS, and IKVAV ligands were associated with a higher percentage of PC12 cells that differentiated to the neuronal phenotype following release from the hydrogel. Moreover, among the hydrogel properties examined (e.g., ligand type, concentration), total polymer density within the hydrogel had the most prominent effect on cell viability, with densities above 15% w/v leading to decreased cell viability likely due to a higher shear modulus. Thus, by identifying key properties of degradable hydrogels that affect cell viability and differentiation following release from the hydrogel, we lay the foundation for application of this system towards future applications of the scaffold as a neural cell delivery vehicle. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:1255–1264, 2013     

Cultivation of human neural progenitor cells in a 3-dimensional self-assembling peptide hydrogel

The influence of 3-dimensional (3D) scaffolds on growth, proliferation and finally neuronal differentiation is of great interest in order to find new methods for cell-based and standardised therapies in neurological disorders or neurodegenerative diseases. 3D structures are expected to provide an environment much closer to the in vivo situation than 2D cultures. In the context of regenerative medicine, the combination of biomaterial scaffolds with neural stem and progenitor cells holds great promise as a therapeutic tool. Culture systems emulating a three dimensional environment have been shown to influence proliferation and differentiation in different types of stem and progenitor cells. Herein, the formation and functionalisation of the 3D-microenviroment is important to determine the survival and fate of the embedded cells. Here we used PuraMatrix (RADA16, PM), a peptide based hydrogel scaffold, which is well described and used to study the influence of a 3D-environment on different cell types. PuraMatrix can be customised easily and the synthetic fabrication of the nano-fibers provides a 3D-culture system of high reliability, which is in addition xeno-free. Recently we have studied the influence of the PM-concentration on the formation of the scaffold. In this study the used concentrations of PM had a direct impact on the formation of the 3D-structure, which was demonstrated by atomic force microscopy. A subsequent analysis of the survival and differentiation of the hNPCs revealed an influence of the used concentrations of PM on the fate of the embedded cells. However, the analysis of survival or neuronal differentiation by means of immunofluorescence techniques posses some hurdles. To gain reliable data, one has to determine the total number of cells within a matrix to obtain the relative number of e.g. neuronal cells marked by βIII-tubulin. This prerequisites a technique to analyse the scaffolds in all 3-dimensions by a confocal microscope or a comparable technique like fluorescence microscopes able to take z-stacks of the specimen. Furthermore this kind of analysis is extremely time consuming. Here we demonstrate a method to release cells from the 3D-scaffolds for the later analysis e.g. by flow cytometry. In this protocol human neural progenitor cells (hNPCs) of the ReNcell VM cell line (Millipore USA) were cultured and differentiated in 3D-scaffolds consisting of PuraMatrix (PM) or PuraMatrix supplemented with laminin (PML). In our hands a PM-concentration of 0.25% was optimal for the cultivation of the cells, however the concentration might be adapted to other cell types. The released cells can be used for e.g. immunocytochemical studies and subsequently analysed by flow cytometry. This speeds up the analysis and more over, the obtained data rest upon a wider base, improving the reliability of the data.     

Glutathione-Triggered Formation of a Fmoc-Protected Short Peptide-Based Supramolecular Hydrogel

A biocompatible method of glutathione (GSH) catalyzed disulfide bond reduction was used to form Fmoc-short peptide-based supramolecular hydrogels. The hydrogels could form in both buffer solution and cell culture medium containing 10% of Fetal Bovine Serum (FBS) within minutes. The hydrogel was characterized by rheology, transmission electron microscopy, and fluorescence emission spectra. Their potential in three dimensional (3D) cell culture was evaluated and the results indicated that the gel with a low concentration of the peptide (0.1 wt%) was suitable for 3D cell culture of 3T3 cells. This study provides an alternative candidate of supramolecular hydrogel for 3D cell culture and cell delivery.     

Self-assembling chimeric protein for the construction of biodegradable hydrogels capable of interaction with integrins expressed on neural stem/progenitor cells

The poor survival of neural stem/progenitor cells following transplantation into the brain is the major problem limiting the effect of cell-based therapy for Parkinson's disease. To overcome this problem, we are involved in designing keratin-based hydrogels that serve as physical barriers to prevent the infiltration of inflammatory cells. Another feature of the hydrogels is to contain a polypeptide that promotes integrin-mediated cell adhesion. To construct such hydrogels, a chimeric protein consisting of an alpha-helical polypeptide and a globular domain derived from laminin was synthesized by means of recombinant DNA technology and coassembled with extracted keratins that form hydrogels through intermolecular coiled-coil association of alpha-helical segments. It was found that neurosphere-forming cells specifically adhered to the keratin-based composite hydrogel and actively proliferated at a high survival rate. These results suggested that the composite hydrogel provides microenvironments suitable for the survival and proliferation of neural progenitor cells.     

Recombinant self‐assembling 16‐residue peptide nanofiber scaffolds for neuronal axonal outgrowth

Self‐assembling peptides are considered a good biological scaffold for the repair of injured nervous system. In order to set up a stable system to produce the peptides at low cost, we used a gene recombinant expression method. The sequence of the peptide was devised to facilitate neural cell attachment and growth. The nucleotide sequence of the self‐assembling peptide was designed, artificially synthesized, and inserted into the fusion protein vector pTYB2. After being transformed and expressed in Escherichia coli BL‐21 (DE3) by means of the fusion protein, the soluble 16‐residue peptide (named RAE16) was obtained by one‐step chitin affinity chromatography. During cell culture, bone marrow stromal cells were fully embedded in the 3D environment of the peptide scaffolds. The MTT (3‐(4,5‐dimethyl‐2‐thiazolyl)‐2,5‐diphenyl‐2‐H‐tetrazolium bromide) test indicated that bone marrow stromal cells cultured in RAE16 had the highest survival rate with the absorbance value of 0.7 at 7 days. Moreover, the cortical neural axons in the RAE16 group were longer (118.36 ± 7.04 μm) than in the other groups (p < 0.01). The recombinant peptide nanofiber scaffolds we designed provide a promising cell culture system for general molecular and cell biology studies and are useful as well for neural regeneration studies.     

基于天然水凝胶的生物材料在骨组织工程中的应用*

天然水凝胶是指原材料来自于天然生物材料的水凝胶。由于这种天然的聚合物含有构成生物体的天然成分,与天然组织具有生物学和化学相似性,而受到特别关注。天然水凝胶由于其与细胞外基质高度的相似性被认为是骨组织工程中优良的仿生基质材料。而针对天然水凝胶机械性能差、成骨诱导性能弱等缺陷,通常需要对天然水凝胶进行改性、引入其他材料或生物活性因子,以此来获得更适用于骨组织工程支架材料。对近年来基于天然水凝胶的生物材料在骨组织工程的应用,与其不同的应用形式(可注射水凝胶、多孔水凝胶支架、3D生物打印水凝胶支架等)进行了概述,以期对这类基于天然水凝胶的生物材料在未来骨组织工程中的应用提供参考。     

Modulation of bone marrow mesenchymal stem cell secretome by ECM-like hydrogels

It has been demonstrated that bone marrow mesenchymal stem cell (BM-MSCs) transplantation has beneficial effects on several central nervous system (CNS) debilitating conditions. Growing evidence indicate that trophic factors secreted by these cells are the key mechanism by which they are acting. These cells are frequently used in combination with 3D artificial matrices, for instance hydrogels, in tissue engineering-based approaches. However, so far, no study has been reported on the influence of such matrices, namely the presence or absence of extracellular matrix motifs, on BM-MSCs secretome and its effects in neuronal cell populations. In this sense, we herein studied the impact of a hydrogel, gellan gum, on the behavior and secretome of BM-MSCs, both in its commercial available form (commonly used in tissue engineering) and in a fibronectin peptide-modified form. The results showed that in the presence of a peptide in the gellan gum hydrogel, BM-MSCs presented higher proliferation and metabolic activity than in the regular hydrogel. Moreover, the typical spindle shape morphology of BM-MSCs was only observed in the modified hydrogel. The effects of the secretome of BM-MSCs were also affected by the chemical nature of the extracellular matrix. BM-MSCs cultured in the modified hydrogel were able to secrete factors that induced higher metabolic viabilities and neuronal cell densities, when compared to those of the unmodified hydrogel. Thus adding a peptide sequence to the gellan gum had a significant effect on the morphology, activity, proliferation and secretome of BM-MSCs. These results highlight the importance of mimicking the extracellular matrix when BM-MSCs are cultured in hydrogels for CNS applications.     

Self-Assembling Peptide Nanofiber Scaffolds Enhance Dopaminergic Differentiation of Mouse Pluripotent Stem Cells in 3-Dimensional Culture

Dopaminergic differentiation of embryonic stem cells (ESCs) gains more and more attention worldwide owing to its potential use for neurorestorative therapy for the treatment of Parkinson’s disease. The conventional 2D cell culture on petri dishes with various animal derived substrata such as collagen gels, laminin, and Matrigel is widely used to induce dopaminergic differentiation and it may limit the efficiency in the generation of dopaminergic neurons from ESCs and prevent their application for human therapies. Here, we reported that a self-assembling peptide made from natural amino acids has a property to generate a true 3D environment for dopaminergic differentiation. Mouse ESCs (R1) and mouse iPSCs (TTF-1) embedded in RADA16-I peptide-derived nanofiber scaffolds led to a marked increase in dopaminergic differentiation compared to the laminin-coated 2D culture or Matrigel-encapsulated 3D culture. These differentiated neurons expressed specific dopaminergic markers and produced appropriate patterns of action potential firing. Consistent with the increase in the number of dopaminergic neurons differentiated from R1 or TTF-1 in the self-assembling peptide nanofiber scaffold (SAPNS), both the expression levels of genes that involve in dopaminergic differentiation and maturation and the dopamine release in SAPNS culture were significantly elevated. The results of the study suggest that SAPNS provides a promising 3D culture system for dopaminergic differentiation.     

MiR‐485‐3p modulates neural stem cell differentiation and proliferation via regulating TRIP6 expression

Recent references have showed crucial roles of several miRNAs in neural stem cell differentiation and proliferation. However, the expression and role of miR‐485‐3p remains unknown. In our reference, we indicated that miR‐485‐3p expression was down‐regulated during NSCs differentiation to neural and astrocytes cell. In addition, the TRIP6 expression was up‐regulated during NSCs differentiation to neural and astrocytes cell. We carried out the dual‐luciferase reporter and found that overexpression of miR‐485‐3p decreased the luciferase activity of pmirGLO‐TRIP6‐wt but not the pmirGLO‐TRIP6‐mut. Ectopic expression of miR‐485‐3p decreased the expression of TRIP6 in NSC. Ectopic miR‐485‐3p expression suppressed the cell growth of NSCs and inhibited nestin expression of NSCs. Moreover, elevated expression of miR‐485‐3p decreased the ki‐67 and cyclin D1 expression in NSCs. Furthermore, we indicated that miR‐485‐3p reduced proliferation and induced differentiation of NSCs via targeting TRIP6 expression. These data suggested that a crucial role of miR‐485‐3p in self‐proliferation and differentiation of NSCs. Thus, altering miR‐485‐3p and TRIP6 modulation may be one promising therapy for treating with neurodegenerative and neurogenesis diseases.     

Chemically cross-linked chitosan hydrogel loaded with gelatin for chondrocyte encapsulation

Composite hydrogels can be used as a scaffolding material for chondrogenesis, which requires a biomimetic environment to maintain chondrocyte morphology and phenotype. In this study, gelatin molecules were loaded into a hydrogel polymerized from a chitosan derivative (CML) to form a semi-interpenetrating polymer network. While the porous structure of the hydrogels in the dry state was not dependent on the gelatin content, the collapse extent and pore size decreased as the gelatin content increased. The gelatin loading also reduced the swelling ratio of the CML hydrogel and enhanced the hydrogel strength at 20°C due to gelation of the gelatin. The release behavior of the gelatin from the CML hydrogel could be controlled by many factors, such as the amount of gelatin, temperature, and solution pH. The weight loss of the composite hydrogel was expedited after gelatin loading and showed a positive relationship with the gelatin content. The results of in vitro cell culture in the hydrogels revealed that gelatin loading improved cell viability and promoted proliferation and glycosaminoglycans secretion of chondrocytes. This new scaffold production technology for chondrocyte encapsulation provides a further step towards CML applications in tissue engineering and other biomedical areas.     

Viscoelastic properties and nanoscale structures of composite oligopeptide-polysaccharide hydrogels

Biocompatible and biodegradable peptide hydrogels are drawing increasing attention as prospective materials for human soft tissue repair and replacement. To improve the rather unfavorable mechanical properties of our pure peptide hydrogels, in this work we examined the possibility of creating a double hydrogel network. This network was created by means of the coassembly of mutually attractive, but self-repulsive oligopeptides within an already-existing fibrous network formed by the charged, biocompatible polysaccharides chitosan, alginate, and chondroitin. Using dynamic oscillatory rheology experiments, it was found that the coassembly of the peptides within the existing polysaccharide network resulted in a less stiff material as compared to the pure peptide networks (the elastic modulus G' decreased from 90 to 10 kPa). However, these composite oligopeptide-polysaccharide hydrogels were characterized by a greater resistance to deformation (the yield strain γ grew from 4 to 100%). Small-angle neutron scattering (SANS) was used to study the 2D cross-sectional shapes of the fibers, their dimensional characteristics, and the mesh sizes of the fibrous networks. Differences in material structures found with SANS experiments confirmed rheology data, showing that incorporation of the peptides dramatically changed the morphology of the polysaccharide network. The resulting fibers were structurally very similar to those forming the pure peptide networks, but formed less stiff gels because of their markedly greater mesh sizes. Together, these findings suggest an approach for the development of highly deformation-resistant biomaterials.     

Evaluation of early and late effects into the acute spinal cord injury of an injectable functionalized self-assembling scaffold

The complex physiopathological events occurring after spinal cord injury (SCI) make this devastating trauma still incurable. Self-assembling peptides (SAPs) are nanomaterials displaying some appealing properties for application in regenerative medicine because they mimic the structure of the extra-cellular matrix (ECM), are reabsorbable, allow biofunctionalizations and can be injected directly into the lesion. In this study we evaluated the putative neurorigenerative properties of RADA16-4G-BMHP1 SAP, proved to enhance in vitro neural stem cells survival and differentiation. This SAP (RADA16-I) has been functionalized with a bone marrow homing motif (BMHP1) and optimized via the insertion of a 4-glycine-spacer that ameliorates scaffold stability and exposure of the biomotifs. We injected the scaffold immediately after contusion in the rat spinal cord, then we evaluated the early effects by semi-quantitative RT-PCR and the late effects by histological analysis. Locomotor recovery over 8 weeks was assessed using Basso, Beattie, Bresnahan (BBB) test. Gene expression analysis showed that at 7 days after lesion the functionalized SAP induced a general upregulation of GAP-43, trophic factors and ECM remodelling proteins, whereas 3 days after SCI no remarkable changes were observed. Hystological analysis revealed that 8 weeks after SCI our scaffold increased cellular infiltration, basement membrane deposition and axon regeneration/sprouting within the cyst. Moreover the functionalized SAP showed to be compatible with the surrounding nervous tissue and to at least partially fill the cavities. Finally SAP injection resulted in a statistically significant improvement of both hindlimbs' motor performance and forelimbs-hindlimbs coordination. Altogether, these results indicate that RADA16-4G-BMHP1 induced favourable reparative processes, such as matrix remodelling, and provided a physical and trophic support to nervous tissue ingrowth. Thus this biomaterial, eventually combined with cells and growth factors, may constitute a promising biomimetic scaffold for regenerative applications in the injured central nervous system.     

On‐demand three‐dimensional freeform fabrication of multi‐layered hydrogel scaffold with fluidic channels

One of the challenges in tissue engineering is to provide adequate supplies of oxygen and nutrients to cells within the engineered tissue construct. Soft‐lithographic techniques have allowed the generation of hydrogel scaffolds containing a network of fluidic channels, but at the cost of complicated and often time‐consuming manufacturing steps. We report a three‐dimensional (3D) direct printing technique to construct hydrogel scaffolds containing fluidic channels. Cells can also be printed on to and embedded in the scaffold with this technique. Collagen hydrogel precursor was printed and subsequently crosslinked via nebulized sodium bicarbonate solution. A heated gelatin solution, which served as a sacrificial element for the fluidic channels, was printed between the collagen layers. The process was repeated layer‐by‐layer to form a 3D hydrogel block. The printed hydrogel block was heated to 37°C, which allowed the gelatin to be selectively liquefied and drained, generating a hollow channel within the collagen scaffold. The dermal fibroblasts grown in a scaffold containing fluidic channels showed significantly elevated cell viability compared to the ones without any channels. The on‐demand capability to print fluidic channel structures and cells in a 3D hydrogel scaffold offers flexibility in generating perfusable 3D artificial tissue composites. Biotechnol. Bioeng. 2010;105: 1178–1186. © 2009 Wiley Periodicals, Inc.