Spatially differentiated midpoint indicator for marine eutrophication of waterborne emissions in Sweden

Purpose

In life cycle assessment (LCA), eutrophication is commonly assessed using site-generic characterisation factors, despite being a site-dependent environmental impact. The purpose of this study was to improve the environmental relevance of marine eutrophication impact assessment in LCA, particularly regarding the impact assessment of waterborne nutrient emissions from Swedish agriculture.

Methods

Characterisation factors were derived using site-dependent data on nutrient transport for all agricultural soils in Sweden, divided into 968 catchment areas, and considering the Baltic Sea, the receiving marine compartment, as both nitrogen- and phosphorus-limited. These new characterisation factors were then applied to waterborne nutrient emissions from typical grass ley and spring barley cultivation in all catchments.

Results and discussion

The site-dependent marine eutrophication characterisation factors obtained for nutrient leaching from soils varied between 0.056 and 0.986 kg N_eq/kg N and between 0 and 7.23 kg N_eq/kg P among sites in Sweden. On applying the new characterisation factors to spring barley and grass ley cultivation at different sites in Sweden, the total marine eutrophication impact from waterborne nutrient emissions for these crops varied by up to two orders of magnitude between sites. This variation shows that site plays an important role in determining the actual impact of an emission, which means that site-dependent impact assessment could provide valuable information to life cycle assessments and increase the relevance of LCA as a tool for assessment of product-related eutrophication impacts.

Conclusions

Characterisation factors for marine eutrophication impact assessment at high spatial resolution, considering both the site-dependent fate of eutrophying compounds and specific nutrient limitations in the recipient waterbody, were developed for waterborne nutrient emissions from agriculture in Sweden. Application of the characterisation factors revealed variations in calculated impacts between sites in Sweden, highlighting the importance of spatial differentiation of characterisation modelling within the scale of the impact.

     

Photochemical ozone creation potentials

Goal, Scope and Background

Photochemical ozone creation potentials (POCPs) typically used in life cycle impact assessment (LCIA) to address the impact category ‘photo-oxidant formation’ only provide factors for particular volatile organic compounds and do not take into account background concentrations and meteorological conditions. However, the formation of ozone from volatile organic compounds (VOCs), carbon monoxide (CO) and nitrogen oxides (NOx) is highly dependent on the background pollutant concentrations and meteorological conditions. Some LCIA manuals therefore recommend working with potentials for high background concentrations of NOx (Derwent 1998), and potentials for low background concentrations of NOx (Andersson-Sköld 1992).

Objectives

This study has introduced an improved set of POCPs independently of meteorological and emission conditions specific to a given period or location. Whereas current POCP values may be relevant to estimate the photo-oxidant formation over a certain (temporally and spatially well-defined) domain, this study has further introduced more relevant values with respect to potential impacts of ozone on human health and environment.

Methods

For the computation of POCP values on the scale of Western Europe, independently of meteorological and emission conditions specific to a given period or location, a Eulerian chemistry-transport numerical model (CHIMERE-continental) has been implemented over three summer seasons. POCPs have been evaluated for ten VOC species (including the whole VOC group), CO and NOx. The coherence of this new set of POCP values with previous studies has been checked. The spatial representa-tivity of POCP values over the simulation domain in Europe has also been addressed. The robustness of these POCP values to changes in the implemented chemical mechanism used in our model has been checked.

Results and Discussion

The POCPs computed in this study were generally lower than the POCPs calculated in previous studies. In the previous studies, but not here, the POCPs have been calculated with particular meteorological conditions (during anti-cyclonic, fair weather conditions) or emission levels (high polluted backgrounds) known to be optimal with respect to ozone formation. Despite the quantitative variations in the POCP values, we have found a good agreement in the relative ranking of the pollutant species between this study and previous studies. It was also shown that POCP values display significant spatial variability over Western Europe (the largest spatial differences were obtained for NO_x where the sign of the POCP value even changes from region to region).

Conclusions

Finally, the temporally and spatially averaged values obtained here for the POCP index update previous values and represent an attempt to generate the most appropriate and accurate scale for European conditions independently of meteorological and emission conditions specific to a given period or location.

Recommendations and Outlook

These new PCOPs should be useful to LCIA-practitioners in further life cycle impact assessment. However, for the NO_x species, we do not recommend the use of the POCP value for LCIA.

     

Developing characterisation factors for land fragmentation impacts on biodiversity in LCA: key learnings from a sugarcane case study

Purpose

Habitat change was identified by the Millennium Ecosystem Assessment as the main direct driver of biodiversity loss. However, while habitat loss is already implemented in Life Cycle Impact Assessment (LCIA) methods, the additional impact on biodiversity due to habitat fragmentation is not assessed yet. Thus, the goal of this study was to include fragmentation effects from land occupation and transformation at both midpoint and endpoint levels in LCIA.

Methods

One promising metric, combining the landscape spatial configuration with species characteristics, is the metapopulation capacity λ, which can be used to rank landscapes in terms of their capacity to support viable populations spatially structured. A methodology to derive worldwide regionalised fragmentation indexes based on λ was used and combined with the Species Fragmented-Area Relationship (SFAR), which relies on λ to assess a species loss due to fragmentation. We adapted both developments to assess fragmentation impacts due to land occupation and transformation at both midpoint and endpoint levels in LCIA. An application to sugarcane production occurring in different geographical areas, more or less sensitive to land fragmentation, was performed.

Results and discussion

The comparison to other existing LCIA indicators highlighted its great potential for complementing current assessments through fragmentation effect inclusion. Last, both models were discussed through the evaluation grid used by the UNEP-SETAC land use LCIA working group for biodiversity impact assessment models.

Conclusions

Midpoint and endpoint characterisation factors were successfully developed to include the impacts of habitat fragmentation on species in LCIA. For now, they are provided for bird species in all forest ecoregions belonging to the biodiversity hotspots. Further work is required to develop characterisation factors for all taxa and all terrestrial ecoregions.

     

ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level

Purpose

Life cycle impact assessment (LCIA) translates emissions and resource extractions into a limited number of environmental impact scores by means of so-called characterisation factors. There are two mainstream ways to derive characterisation factors, i.e. at midpoint level and at endpoint level. To further progress LCIA method development, we updated the ReCiPe2008 method to its version of 2016. This paper provides an overview of the key elements of the ReCiPe2016 method.

Methods

We implemented human health, ecosystem quality and resource scarcity as three areas of protection. Endpoint characterisation factors, directly related to the areas of protection, were derived from midpoint characterisation factors with a constant mid-to-endpoint factor per impact category. We included 17 midpoint impact categories.

Results and discussion

The update of ReCiPe provides characterisation factors that are representative for the global scale instead of the European scale, while maintaining the possibility for a number of impact categories to implement characterisation factors at a country and continental scale. We also expanded the number of environmental interventions and added impacts of water use on human health, impacts of water use and climate change on freshwater ecosystems and impacts of water use and tropospheric ozone formation on terrestrial ecosystems as novel damage pathways. Although significant effort has been put into the update of ReCiPe, there is still major improvement potential in the way impact pathways are modelled. Further improvements relate to a regionalisation of more impact categories, moving from local to global species extinction and adding more impact pathways.

Conclusions

Life cycle impact assessment is a fast evolving field of research. ReCiPe2016 provides a state-of-the-art method to convert life cycle inventories to a limited number of life cycle impact scores on midpoint and endpoint level.

     

Metal toxicity characterization factors for marine ecosystems—considering the importance of the estuary for freshwater emissions

Purpose

The study develops site-dependent characterization factors (CFs) for marine ecotoxicity of metals emitted to freshwater, taking their passage of the estuary into account. To serve life cycle assessment (LCA) studies where emission location is often unknown, site-generic marine CFs were developed for metal emissions to freshwater and coastal seawater, respectively. The new CFs were applied to calculate endpoint impact scores for the same amount of metal emission to each compartment, to compare the relative ecotoxicity damages in freshwater and marine ecosystems in LCA.

Methods

Site-dependent marine CFs for emission to freshwater were calculated for 64 comparatively independent seas (large marine ecosystems, LMEs). The site-dependent CF was calculated as the product of fate factor (FF), bioavailability factor (BF), and effect factor (EF). USEtox modified with site-dependent parameters was extended with an estuary removal process to calculate FF. BF and EF were taken from Dong et al. Environ Sci Technol 50:269–278 (2016). Site-generic marine CFs were derived from site-dependent marine CFs. Different averaging principles were tested, and the approach representing estuary discharge rate was identified as the best one. Endpoint marine and freshwater metals CFs were developed to calculate endpoint ecotoxicity impact scores.

Results and discussion

Marine ecotoxicity CFs are 1.5 orders of magnitude lower for emission to freshwater than for emission to seawater for Cr, Cu, and Pb, due to notable removal fractions both in freshwater and estuary. For the other metals, the difference is less than half an order of magnitude, mainly due to removal in freshwater. The site-dependent CFs generally vary within two orders of magnitude around the site-generic CF. Compared to USES-LCA 2.0 CFs (egalitarian perspective), the new site-generic marine CFs for emission to seawater are 1–4 orders of magnitude lower except for Pb. The new site-generic marine CFs for emission to freshwater lie within two orders of magnitude difference from USES-LCA 2.0 CFs. The comparative contribution share analysis shows a poor agreement of metal toxicity ranking between both methods.

Conclusions

Accounting for estuary removal particularly influences marine ecotoxicity CFs for emission to freshwater of metals that have a strong tendency to complex-bind to particles. It indicates the importance of including estuary in the characterization modelling when dealing with those metals. The resulting endpoint ecotoxicity impact scores are 1–3 orders of magnitude lower in seawater than in freshwater for most metals except Pb, illustrating the higher sensitivity of freshwater ecosystems to metal emissions, largely due to the higher species density there.

     

Notions on the Design and Use of an Ideal Regional or Global LCA Database

Goal, Scope and Background

More and more national and regional life cycle assessment (LCA) databases are being established satisfying the increasing demand on LCA in policy making (e.g. Integrated Product Policy, IPP) and in industry. In order to create harmonised datasets in such unified databases, a common understanding and common rules are required. This paper describes major requirements on the way towards an ideal national background LCA database in terms of co-operation, but also in terms of life cycle inventory analysis (LCI) and impact assessment (LCIA) methodology.

Methods

A classification of disputed methodological issues is made according to their consensus potential. In LCI, three main areas of dissent are identified where consensus seems hardly possible, namely system modelling (consequential versus attributional), allocation (including recycling) and reporting (transparency and progressiveness). In LCIA the time aspect is added to the well-known value judgements of the weighting step.

Results and Discussions

It is concluded that LCA methodology should rather allow for plurality than to urge harmonisation in any case. A series of questions is proposed to identify the most appropriate content of the LCA background database or the most appropriate LCI dataset. The questions help to identify the best suited approach in modelling the product system in general and multioutput and recycling processes in particular. They additionally help to clarify the position with regard to time preferences in LCIA. Intentionally, the answers to these questions are not attributed to particular goal and scope definitions, although some recommendations and clarifying explanations are provided.

Recommendations and Perspective

It is concluded that there is not one single ideal background database content. Value judgements are also present in LCI modelling and require pluralistic solutions; solutions possibly based on the same primary data. It is recommended to focus the methodological discussion on aspects where consensus is within reach, sensible and of added value for all parties.

     

Happiness and Sustainable Consumption: Psychological and physical rebound effects at work in a tool for sustainable design

-

DOI: http://dx.doi.org/10.1065/lca2006.04.018

Goal, Scope and Background

Life cycle assessment has emerged into a useful tool to assess and potentially reduce the environmental impacts per functional unit. This has contributed to increase eco-efficiency but not necessarily to decrease absolute pollution per capita. The number of functional units is increasing and new functions add to the impacts of consumption. Despite the attempts to use different levels of definitions for the functional unit and applying LCA in the field of lifestyle studies there has been little success to grasp the consumption side of sustainable production and consumption. This contribution aims to tackle the consumption side by at least two extensions: the function of products, services, and activities is assessed with a multi-attribute need function and the propensity to cause both psychological and physical rebound effects are considered in the design phase.

Methods

We develop a checklist approach with an evaluation and assessment table. The elements of the checklist are rooted in a number of independent fields of science: needs matrix, happiness enhancing factors, a number of limiting factors that can cause rebound effects, and streamlined LCA.

Results and Conclusion

For illustration purposes we comparatively evaluate gardening, having a dog, a weekend house, and starting yoga classes and show that the new analysis framework is able to make transparent and operable the inclusion of a number of additional factors that remained so far implicit or neglected. The additional factors considered can be grouped into factors that may cause rebound effects through psychological or physical mechanisms. The assessment table combines the degree of satisfying needs and enhancing happiness in a psychological rebound score. The physical rebound score considers six factors that may constrain consumption: Costs, time, space, other scarce resources, information, and skills. This allows predicting the potential for rebound effects that would increase total impacts from consumption. In addition, it gives also a handle on how to use the knowledge on rebound effects to not only reduce the impacts of the product or activity at hand but also reducing other consumption that in turn might have adverse impacts.

Recommendation and Perspective

Many assumptions in selecting and quantifying the additional factors and the final assessment procedure remain conceptual and therefore provisional. This contribution opens new avenues of investigations that need both further refinements of the theories and empirical evidence. Consumerism and materialism has undermined much of the success stories of improved eco-efficiency and LCA. We suggest using some of the very same psychological and physical mechanisms to foster sustainable consumption.

     

The Integration of Economic and Social Aspects in Life Cycle Impact Assessment

-

DOI: http://dx.doi.org/10.1065/lca2006.04.016

Goal, Scope and Background

Although both cost-benefit analysis (CBA) and life cycle assessment (LCA) have developed from engineering practice, and have the same objective of a holistic ex-ante assessment of human activities, the techniques have until recently developed in relative isolation. This has resulted in a situation where much can be gained from an integration of the strong aspects of each technique. Such integration is now being prompted by the more widespread use of both CBA and LCA on the global arena, where also the issues of social responsibility are now in focus. Increasing availability of data on both biophysical and social impacts now allow the development of a truly holistic, quantitative environmental assessment technique that integrates economic, biophysical and social impact pathways in a structured and consistent way. The concept of impact pathways, linking biophysical and economic inventory results via midpoint impact indicators to final damage indicators, is well described in the LCA and CBA literature. Therefore, this paper places specific emphasis on how social aspects can be integrated in LCA.

Methods

and Results. With a starting point in the conceptual structure and approach of life cycle impact assessment (LCIA), as developed by Helias Udo de Haes and the SETAC/UNEP Life Cycle Initiative, the paper identifies six damage categories under the general heading of human life and well-being. The paper proposes a comprehensive set of indicators, with units of measurement, and a first estimate of global normalisation values, based on incidence or prevalence data from statistical sources and severity scores from health state analogues. Examples are provided of impact chains linking social inventory indicators to impacts on both human well-being and productivity.

Recommendation and Perspective

It is suggested that human well-being measured in QALYs (Quality Adjusted Life Years) may provide an attractive single-score alternative to direct monetarisation.

     

Ecosystem quality in LCIA: status quo,harmonization, and suggestions for the way forward

Purpose

Life cycle impact assessment (LCIA) results are used to assess potential environmental impacts of different products and services. As part of the UNEP-SETAC life cycle initiative flagship project that aims to harmonize indicators of potential environmental impacts, we provide a consensus viewpoint and recommendations for future developments in LCIA related to the ecosystem quality area of protection (AoP). Through our recommendations, we aim to encourage LCIA developments that improve the usefulness and global acceptability of LCIA results.

Methods

We analyze current ecosystem quality metrics and provide recommendations to the LCIA research community for achieving further developments towards comparable and more ecologically relevant metrics addressing ecosystem quality.

Results and discussion

We recommend that LCIA development for ecosystem quality should tend towards species-richness-related metrics, with efforts made towards improved inclusion of ecosystem complexity. Impact indicators—which result from a range of modeling approaches that differ, for example, according to spatial and temporal scale, taxonomic coverage, and whether the indicator produces a relative or absolute measure of loss—should be framed to facilitate their final expression in a single, aggregated metric. This would also improve comparability with other LCIA damage-level indicators. Furthermore, to allow for a broader inclusion of ecosystem quality perspectives, the development of an additional indicator related to ecosystem function is recommended. Having two complementary metrics would give a broader coverage of ecosystem attributes while remaining simple enough to enable an intuitive interpretation of the results.

Conclusions

We call for the LCIA research community to make progress towards enabling harmonization of damage-level indicators within the ecosystem quality AoP and, further, to improve the ecological relevance of impact indicators.

     

Impacts of onshore wind energy production on birds and bats: recommendations for future life cycle impact assessment developments

Purpose

Models for quantifying impacts on biodiversity from renewable energy technologies are lacking within life cycle impact assessment (LCIA). We aim to provide an overview of the effects of wind energy on birds and bats, with a focus on quantitative methods. Furthermore, we investigate and provide the necessary background for how these can be integrated into new developments of LCIA models in future.

Methods

We reviewed available literature summarizing the effects of wind energy developments on birds and bats. We provide an overview of available quantitative assessment methods that have been employed outside of the LCIA framework to model the different impacts of wind energy developments on wildlife. Combining the acquired knowledge on impact pathways and associated quantitative methods, we propose possibilities for future approaches for a wind energy impact assessment methodology for LCIA.

Results and discussion

Wind energy production has impacts on terrestrial biodiversity through three main pathways: collision, disturbance, and habitat alterations. Birds and bats are consistently considered the most affected taxonomic groups, with different responses to the before-mentioned impact pathways. Outside of the LCIA framework, current quantitative impact assessment prediction models include collision risk models, species distribution models, individual-based models, and population modeling approaches. Developed indices allow scaling of species-specific vulnerability to mortality, disturbance, and/or habitat alterations.

Conclusions

Although insight into the causes behind collision risk, disturbance, and habitat alterations for bats and birds is still limited, the current knowledge base enables the development of a robust assessment tool. Modeling the impacts of habitat alterations, disturbance, and collisions within an LCIA framework is most appropriate using species distribution models as those enable the estimation of species’ occurrences across a region. Although local-scale developments may be more readily feasible, further up-scaling to global coverage is recommended to allow comparison across regions and technologies, and to assess cumulative impacts.

     

Weighting in LCA Based on Ecotaxes - Development of a Mid-point Method and Experiences from Case Studies

-

DOI: http://dx.doi.org/10.1065/lca2006.04.015

Goal, Scope and Background

The weighting phase in Life Cycle Assessment (LCA) is and has always been a controversial issue, partly because this element requires the incorporation of social, political and ethical values. Despite the controversies, weighting is widely used in practise. In this paper we will present an approach for monetisation of environmental impacts which is based on the consistent use of ecotaxes and fees in Sweden as a basis for the economic values. The idea behind this approach is that taxes and fees are expressions of the values society places on resource uses and emissions. An underlying assumption for this is that the decisions taken by policy-makers are reflecting societal values thus reflecting a positive view of representative democracy.

Methods

In the method a number of different ecotaxes are used. In many cases they can directly be used as valuation weighting factors, an example is the CO2-tax that can be used as a valuation of CO2-emissions. In some cases, a calculation has to be made in order to derive a weighting factor. An example of this is the tax on nitrogen fertilisers which can be recalculated to an emission of nitrogen which can be used as a weighting factor for nitrogen emissions. The valuation weighting factors can be connected to characterisation methods in the normal LCA practise. We have often used the Ecotax method in parallel to other weighting methods such as the Ecoindicator and EPS methods and the results are compared.

Results and Discussion

A new set of weighting factors has been developed which has been used in case studies. It is interesting to note that the Ecotax method is able to identify different environmental problems as the most important ones in different case studies. In some cases, the Ecotax method has identified some interventions as the most important ones which lack weighting factors in other weighting methods. The midpoint-endpoint debate in the LCA literature has often centred on different types of uncertainties. Sometimes it is claimed that an advantage with having an endpoint approach is that the weighting would be easier and less uncertain. Here we are however suggesting a mid-point weighting method that we claim are no less uncertain than other often used weighting methods based on a damage assessment. This paper can therefore be seen as a discussion paper also in the midpoint-endpoint debate.

Conclusion and Recommendation

The Ecotax method is ready to use. It should be further updated and developed as taxes are changed and new characterisation methods are developed. The method is not only relevant for LCA but also for other environmental systems analysis. The Ecotax method has also been used as a valuation method for Cost-Benefit Analysis (CBA), Life Cycle Costing (LCC) and within the context of a Strategic Environmental Assessment (SEA).

     

Impacts from hydropower production on biodiversity in an LCA framework—review and recommendations

Purpose

Expanding renewable energy production is widely accepted as a promising strategy in climate change mitigation. However, even renewable energy production has some environmental impacts, some of which are not (yet) covered in life cycle impact assessment (LCIA). We aim to identify the most important cause-effect pathways related to hydropower production on biodiversity, as one of the most common renewable energy sources, and to provide recommendations for future characterization factor (CF) development.

Methods

We start with a comprehensive review of cause-effect chains related to hydropower production for both aquatic and terrestrial biodiversity. Next, we explore contemporary coverage of impacts on biodiversity from hydropower production in LCA. Further, we select cause-effect pathways displaying some degree of consistency with existing LCA frameworks for method development recommendations. For this, we compare and contrast different hydrologic models and discuss how existing LCIA methodologies might be modified or combined to improve the assessment of biodiversity impacts from hydropower production.

Results and discussion

Hydropower impacts were categorized into three overarching impact pathways: (1) freshwater habitat alteration, (2) water quality degradation, and (3) land use change. Impacts included within these pathways are flow alteration, geomorphological alteration to habitats, changes in water quality, habitat fragmentation, and land use transformation. For the majority of these impacts, no operational methodology exists currently. Furthermore, the seasonal nature of river dynamics requires a level of temporal resolution currently beyond LCIA modeling capabilities. State-of-the-art LCIA methods covering biodiversity impacts exist for land use and impacts from consumptive water use that can potentially be adapted to cases involving hydropower production, while other impact pathways need novel development.

Conclusions

In the short term, coverage of biodiversity impacts from hydropower could be significantly improved by adding a time step representing seasonal ecological water demands to existing LCIA methods. In the long term, LCIA should focus on ecological response curves based on multiple hydrologic indices to capture the spatiotemporal aspects of river flow, by using models based on the “ecological limits to hydrologic alteration” (ELOHA) approach. This approach is based on hydrologic alteration-ecological response curves, including site-specific environmental impact data. Though data-intensive, ELOHA represents the potential to build a global impact assessment framework covering multiple ecological indicators from local impacts. Further, we recommend LCIA methods based on degree of regulation for geomorphologic alteration and a fragmentation index based on dam density for “freshwater habitat alteration,” which our review identified as significant unquantified threats to aquatic biodiversity.

     

The Glasgow consensus on the delineation between pesticide emission inventory and impact assessment for LCA

Purpose

Pesticides are applied to agricultural fields to optimise crop yield and their global use is substantial. Their consideration in life cycle assessment (LCA) is affected by important inconsistencies between the emission inventory and impact assessment phases of LCA. A clear definition of the delineation between the product system model (life cycle inventory—LCI, technosphere) and the natural environment (life cycle impact assessment—LCIA, ecosphere) is missing and could be established via consensus building.

Methods

A workshop held in 2013 in Glasgow, UK, had the goal of establishing consensus and creating clear guidelines in the following topics: (1) boundary between emission inventory and impact characterisation model, (2) spatial dimensions and the time periods assumed for the application of substances to open agricultural fields or in greenhouses and (3) emissions to the natural environment and their potential impacts. More than 30 specialists in agrifood LCI, LCIA, risk assessment and ecotoxicology, representing industry, government and academia from 15 countries and four continents, met to discuss and reach consensus. The resulting guidelines target LCA practitioners, data (base) and characterisation method developers, and decision makers.

Results and discussion

The focus was on defining a clear interface between LCI and LCIA, capable of supporting any goal and scope requirements while avoiding double counting or exclusion of important emission flows/impacts. Consensus was reached accordingly on distinct sets of recommendations for LCI and LCIA, respectively, recommending, for example, that buffer zones should be considered as part of the crop production system and the change in yield be considered. While the spatial dimensions of the field were not fixed, the temporal boundary between dynamic LCI fate modelling and steady-state LCIA fate modelling needs to be defined.

Conclusions and recommendations

For pesticide application, the inventory should report pesticide identification, crop, mass applied per active ingredient, application method or formulation type, presence of buffer zones, location/country, application time before harvest and crop growth stage during application, adherence with Good Agricultural Practice, and whether the field is considered part of the technosphere or the ecosphere. Additionally, emission fractions to environmental media on-field and off-field should be reported. For LCIA, the directly concerned impact categories and a list of relevant fate and exposure processes were identified. Next steps were identified: (1) establishing default emission fractions to environmental media for integration into LCI databases and (2) interaction among impact model developers to extend current methods with new elements/processes mentioned in the recommendations.

     

Human and Ecological Life Cycle Tools for the Integrated Assessment of Systems (HELIAS)

-

DOI: http://dx.doi.org/10.1065/lca2006.04.008

Goal, Scope and Background

CML has contributed to the development of life cycle decision support tools, particularly Substance / Material Flow Analysis (SFA respectively MFA) and Life Cycle Assessment (LCA). Ever since these tools emerged there have been discussions on how these tools relate to each other, and how they relate to more traditional tools. Remarkably little, however, has been published on these relationships from an empirical side: which combinations of tools have actually been used, and what is the added value of combining tools in practical case studies. In this paper, we report on CML's experience in this field by presenting a number of case studies with their related research questions, for which different tools were deployed.

Methods

Three case studies are discussed: 1) Waste water treatment: various options for waste water treatment have been assessed on their eco-efficiency, using SFA to comment on the influence of these options on the flows of certain substances in the water system of a geographical area and a combination of LCA and life cycle costing (LCC) to assess the life-cycle impacts and costs of these options; 2) Prioritization of environmental policy measures: A methodology has been developed to prioritize environmental policy measures and investments within companies based on both the environmental impacts and the costs of these measures; and 3) Environmental weighting of materials: to add an environmental dimension to standard MFA accounts, materials were weighted with cradle-to-grave impact factors based on LCA data and impact assessment factors.

Results and Discussion

For each of these cases, the research questions at stake, the tools applied, the results and the added value, limitations and problems of combining the tools are reported.

Conclusions

and Perspective. Based on these experiences, it is concluded that using several tools to address a complicated problem is not only a theoretical proposal, but also something that has been applied successfully in a variety of practical situations. Furthermore, using several tools in combination does not necessarily lead to an increased information supply to decisionmakers. Instead, it may contribute to the comprehensibility and ease of interpretation of the information that would have been provided by using a single tool. Finally, it is concluded that there is not one generally valid protocol for which tools to use for which question. The essential idea of using a combination of tools is exactly the fact that research questions are not simple by nature and cannot be generalized into protocols.

     

Distance-to-Target Weighting in Life Cycle Impact Assessment Based on Chinese Environmental Policy for the Period 1995-2005 (6 pp)

Background and Objective

. Values in the known weighting methods in Life Cycle Assessment are mostly founded by the societal systems of developed countries. What source of weights and which weighting methods are reliable for a big developing country like China? The purpose of this paper is to find a possible weighting method and available data that will work well for LCA practices conducted in China. Since government policies and decisions play a leading role in the process of environmental protection in developing countries, the weights derived from political statements may be a consensus by representatives of the public.

Methods

'Distance-to-political target' principle is used in this paper to derive weights of five problem-oriented impact categories. The critical policy targets are deduced from the environmental policies issued in the period of the Ninth Five-year (1996-2000) and the Tenth Five-year (2001-2005) Plan for the Development of National Economy and Society of China. Policy targets on two five-year periods are presented and analyzed. Weights are determined by the quotient between the reference levels and target levels of a certain impact category.

Results and Discussion

Since the Tenth Five-year Plan put forward the overall objective to reduce the level of regional pollution by 2005, the weights for AP, EP and POCP for 2000-2005 are more than 1. By comparison between the Ninth Five-year and Tenth Five-year period, the results show that the weights obtained in this paper effectively represent Chinese political environmental priorities in different periods. For the weights derived from China's political targets for the overall period 1995-2005, the rank order of relative importance is ODP>AP>POCP>EP>GWP. They are recommended to the potential users for the broader disparity among the five categories. By comparison with the weights presented by the widespread EDIP method, the result shows that there's a big difference in the relative importance of ozone depletion and global warming.

-

In conclusion, the weighting factors and rank order of impact categories determined in this study represent the characteristics of the big developing country. The derived weighting set can be helpful to LCA practices of products within the industrial systems of China.

     

Support for Sustainable Development Policy Decisions A Case Study from Highway Maintenance

-

http://dx.doi.org/10.1065/lca2006.04.009

Goal, Scope and Method

logy. This paper describes a case study carried out as part of a wider programme to provide support for environmental decision-making in the highway maintenance programme of a local government body: Surrey County Council (SCC). UK local authorities are required to demonstrate that sustainable development principles are addressed in service provision, by improving environmental, economic or social wellbeing and improving public consultation. A methodological approach was developed to meet these requirements by using life cycle assessment (LCA) and multi-criteria decision analysis (MCDA) through the process of decision conferencing.

Results

In projects requiring strategic decisions, difficulties arise in identifying relevant sustainable development criteria and in evaluating maintenance options against these criteria where the context for decision-making is complex and characterised by uncertainty, where multiple public policy objectives compete and a number of decision-makers and key players are affected by the outcome. Clearly, a structured process is needed to engage such stakeholders in the decision process, utilising quantitative and qualitative information. The approach described proved to be capable of fulfilling these requirements.

Conclusions

and Recommendations. The approach of combining LCA with MCDA through decision conferencing is capable of further development to support other strategic decision-making activities. However, this illustrative case study has revealed a need for methodological developments in LCA for local, project-level decisions.

     

Global guidance on environmental life cycle impact assessment indicators: impacts of climate change,fine particulate matter formation,water consumption and land use

Purpose

Guidance is needed on best-suited indicators to quantify and monitor the man-made impacts on human health, biodiversity and resources. Therefore, the UNEP-SETAC Life Cycle Initiative initiated a global consensus process to agree on an updated overall life cycle impact assessment (LCIA) framework and to recommend a non-comprehensive list of environmental indicators and LCIA characterization factors for (1) climate change, (2) fine particulate matter impacts on human health, (3) water consumption impacts (both scarcity and human health) and 4) land use impacts on biodiversity.

Methods

The consensus building process involved more than 100 world-leading scientists in task forces via multiple workshops. Results were consolidated during a 1-week Pellston Workshop? in January 2016 leading to the following recommendations.

Results and discussion

LCIA framework: The updated LCIA framework now distinguishes between intrinsic, instrumental and cultural values, with disability-adjusted life years (DALY) to characterize damages on human health and with measures of vulnerability included to assess biodiversity loss. Climate change impacts: Two complementary climate change impact categories are recommended: (a) The global warming potential 100 years (GWP 100) represents shorter term impacts associated with rate of change and adaptation capacity, and (b) the global temperature change potential 100 years (GTP 100) characterizes the century-scale long term impacts, both including climate-carbon cycle feedbacks for all climate forcers. Fine particulate matter (PM_2.5) health impacts: Recommended characterization factors (CFs) for primary and secondary (interim) PM_2.5 are established, distinguishing between indoor, urban and rural archetypes. Water consumption impacts: CFs are recommended, preferably on monthly and watershed levels, for two categories: (a) The water scarcity indicator “AWARE” characterizes the potential to deprive human and ecosystems users and quantifies the relative Available WAter REmaining per area once the demand of humans and aquatic ecosystems has been met, and (b) the impact of water consumption on human health assesses the DALYs from malnutrition caused by lack of water for irrigated food production. Land use impacts: CFs representing global potential species loss from land use are proposed as interim recommendation suitable to assess biodiversity loss due to land use and land use change in LCA hotspot analyses.

Conclusions

The recommended environmental indicators may be used to support the UN Sustainable Development Goals in order to quantify and monitor progress towards sustainable production and consumption. These indicators will be periodically updated, establishing a process for their stewardship.

     

Life cycle assessment of nickel products

Purpose

To support the data requirements of stakeholders, the Nickel Institute (NI) conducted a global life cycle impact assessment (LCIA) to show, with indicators, the potential environmental impacts of the production of nickel and ferronickel from mine to refinery gate. A metal industry wide agreed approach on by-products and allocation was applied.

Methods

Nine companies, comprising 19 operations, contributed data, representing 52 % of global nickel metal production and 40 % of global ferronickel production. All relevant pyro- and hydrometallurgical production routes were considered, across most major nickel-producing regions. Data from Russia, the biggest nickel-producing nation, was included; the Chinese industry did not participate. 2011 was chosen as reference year for data collection. The LCIA applied allocation of impacts of by-products using both economic and mass allocations. A sensitivity analysis was conducted to further understand the relevance and impact of the different allocation approaches.

Results and discussion

The primary extraction and refining steps are the main contributors to primary energy demand (PED) and global warming potential (GWP), contributing 60 and 70 % to the PED for the production of 1 kg class I nickel and 1 kg nickel in ferronickel, respectively, and over 55 % of the GWP for both nickel products. The PED for 1 kg class 1 nickel was calculated to be 147 MJ, whilst the PED for 1 kg nickel in ferronickel was calculated to be three times higher at 485 MJ. The main factors influencing energy demand in the metallurgical processes are ore grade and ore mineralogy. Sulphidic ore is less energy intensive to process than oxidic ore. Eighty-six percent of the production volume from class 1 nickel producers, in this study, is from sulphidic ore. All ferronickel was produced from oxidic ore. The LCIA results, including a sensitivity analysis of the impact of producers with higher and lower PED, reflect the influence of the production route on energy demand and on environmental impact categories.

Conclusions

Conformant to relevant ISO standards, and backed-up with a technical and critical review, this LCIA quantifies the environmental impacts associated with the production of the main nickel products. With this study, a sound background dataset for downstream users of nickel has been provided. The Nickel Institute aims to update their data in the coming years to reflect upon changes in technology, energy efficiency, and raw material input.