Double-strand breaks at the target locus stimulate gene targeting in embryonic stem cells.

Double-strand breaks (DSBs) are recombinogenic lesions in chromosomal DNA in yeast, Drosophila and Caenorhabditis elegans. Recent studies in mammalian cells utilizing the I-Scel endonuclease have demonstrated that in some immortalized cell lines DSBs in chromosomal DNA are also recombinogenic. We have now tested embryonic stem (ES) cells, a non-transformed mouse cell line frequently used in gene targeting studies. We find that a DSB introduced by I-Scel stimulates gene targeting at a selectable neo locus at least 50-fold. The enhanced level of targeting is achieved by transient expression of the I-Scel endonuclease. In 97% of targeted clones a single base pair polymorphism in the transfected homologous fragment was incorporated into the target locus. Analysis of the targeted locus demonstrated that most of the homologous recombination events were 'two-sided', in contrast to previous studies in 3T3 cells in which 'one-sided' homologous events predominated. Thus ES cells may be more faithful in incorporating homologous fragments into their genome than other cells in culture.     

End extension repair of introduced targeting vectors mediated by homologous recombination in mammalian cells.

We have studied the mechanism of targeted recombination in mammalian cells using a hemizygous adenine phosphoribosyltransferase-deficient (APRT-) Chinese hamster ovary (CHO) cell mutant as a recipient. Three structurally different targeting vectors with a 5' or a 3', or both, end-deleted aprt sequence, in either a closed-circular or linear form, were transfected to the cells with a mutated aprt gene by electroporation. APRT-positive (APRT+) recombinant clones were selected and analyzed to study the gene correction events of the deletion mutation. Some half of 58 recombinant clones obtained resulted from corrections of the deleted chromosomal aprt gene by either gene replacement or gene insertion, a mechanism which is currently accepted for homologous recombination in mammalian cells. However, the chromosomal sequence in the remaining half of the recombinants remained uncorrected but their truncated end of the aprt gene in the incoming vectors was corrected by extending the end beyond the region of homology to the target locus; the corrected vector was then randomly integrated into the genome. This extension, termed end extension repair, was observed with all three vectors used and was as far as 4.6-kilobase (kb) or more long. It is evident that the novel repair reaction mediated by homologous recombination, in addition to gene replacement and gene insertion, is also involved in gene correction events in mammalian cells. We discuss the model which may account for this phenomenon.     

The molecular basis of multiple vector insertion by gene targeting in mammalian cells

Gene targeting using sequence insertion vectors generally results in integration of one copy of the targeting vector generating a tandem duplication of the cognate chromosomal region of homology. However, occasionally the target locus is found to contain >1 copy of the integrated vector. The mechanism by which the latter recombinants arise is not known. In the present study, we investigated the molecular basis by which multiple vectors become integrated at the chromosomal immunoglobulin mu locus in a murine hybridoma. To accomplish this, specially designed insertion vectors were constructed that included six diagnostic restriction enzyme markers in the Cmu region of homology to the target chromosomal mu locus. This enabled contributions by the vector-borne and chromosomal Cmu sequences at the recombinant locus to be ascertained. Targeted recombinants were isolated and analyzed to determine the number of vector copies integrated at the chromosomal immunoglobulin mu locus. Targeted recombinants identified as bearing >1 copy of the integrated vector resulted from a Cmu triplication formed by two vector copies in tandem. Examination of the fate of the Cmu region markers suggested that this class of recombinant was generated predominantly, if not exclusively, by two targeted vector integration events, each involving insertion of a single copy of the vector. Both vector insertion events into the chromosomal mu locus were consistent with the double-strand-break repair mechanism of homologous recombination. We interpret our results, taken together, to mean that a proportion of recipient cells is in a predetermined state that is amenable to targeted but not random vector integration.     

PCR-based gene targeting of the inducible nitric oxide synthase (NOS2) locus in murine ES cells,a new and more cost-effective approach

Gene targeting by double homologous recombination in murine embryonic stem (ES) cells is a powerful tool used to study the cellular consequences of specific genetic mutations. A typical targeting construct consists of a neomycin phosphotransferase (neo) gene flanked by genomic DNA fragments that are homologous to sequences in the target chromosomal locus. Homologous DNA fragments are typically cloned from a murine genomic DNA library. Here we describe an alternative approach whereby the inducible nitric oxide synthase (NOS2) gene locus is partially mapped and homologous DNA sequences obtained using a long-range PCR method. A 7 kb NOS2 amplicon is used to construct a targeting vector where theneo gene is flanked by PCR-derived homologous DNA sequences. The vector also includes a thymidine kinase (tk) negative-selectable marker gene. Following transfection into ES cells, the PCR-based targeting vector undergoes efficient homologous recombination into the NOS2 locus. Thus, PCR-based gene targeting can be a valuable alternative to the conventional cloning approach. It expedites the acquisition of homologous genomic DNA sequences and simplifies the construction of targeting plasmids by making use of defined cloning sites. This approach should result in substantial time and cost savings for appropriate homologous recombination projects.     

Efficiency of insertion versus replacement vector targeting varies at different chromosomal loci.

We have analyzed the targeting frequencies and recombination products generated with isogenic vectors at the fah and fgr loci in embryonic stem cells. A single vector which could be linearized at different sites to generate either a replacement or an insertion vector was constructed for each locus. A replacement event predominated when the vectors were linearized at the edge of the homologous sequences, while an insertion event predominated when the vectors were linearized within the homologous sequences. However, the ratio of the targeting frequencies exhibited by the different vector configurations differed for the two loci. When the fgr vector was linearized as an insertion vector, the ratio of targeted to random integrations was four- to eightfold greater than when the vector was linearized as a replacement vector. By contrast, the ratio of targeted to random integrations at the fah locus did not vary with the linearization site of the vector. The different relationships between the targeting frequency and the vector configuration at the fgr and fah loci may indicate a DNA sequence or chromatin structure preference for different targeting pathways.     

Location of crossovers during gene targeting with insertion and replacement vectors.

Gene targeting was used to introduce nonselectable genetic changes into chromosomal loci in mouse embryo-derived stem cells. The nonselectable markers were linked to a selectable marker in both insertion- and replacement-type vectors, and the transfer of the two elements to the Hprt locus was assayed. When insertion vectors were used as substrates, the frequency of transfer was highly dependent upon the distance between the nonselectable marker and the double-strand break in the vector. A marker located close to the vector ends was frequently lost, suggesting that a double-strand gap repair activity is involved in vector integration. When replacement vectors were used, cotransfer of a selectable marker and a nonselectable marker 3 kb apart was over 50%, suggesting that recombination between vector and target often occurs near the ends of the vector. To illustrate the use of replacement vectors to transfer specific mutations to the genome, we describe targeting of the delta F508 mutation to the CFTR gene in mouse embryo-derived stem cells.     

Homology dependence of targeted recombination at the Chinese hamster APRT locus.

Using simple linear fragments of the Chinese hamster adenine phosphoribosyltransferase (APRT) gene as targeting vectors, we have investigated the homology dependence of targeted recombination at the endogenous APRT locus in Chinese hamster ovary (CHO) cells. We have examined the effects of varying either the overall length of targeting sequence homology or the length of 5' or 3' flanking homology on both the frequency of targeted homologous recombination and the types of recombination events that are obtained. We find an exponential (logarithmic) relationship between length of APRT targeting homology and the frequency of targeted recombination at the CHO APRT locus, with the frequency of targeted recombination dependent upon both the overall length of targeting homology and the length of homology flanking each side of the target gene deletion. Although most of the APRT+ recombinants analyzed reflect simple targeted replacement or conversion of the target gene deletion, a significant fraction appear to have arisen by target gene-templated extension and correction of the targeting fragment sequences. APRT fragments with limited targeting homology flanking one side of the target gene deletion yield proportionately fewer target gene conversion events and proportionately more templated extension and vector correction events than do fragments with more substantial flanking homology.     

Targeting of the Gi2α Gene in es cells with Replacement and Insertion Vectors

Abstract

Five replacement vectors (RV) and one insertion vector (IV) were constructed in which ca. 10 kb of genomic G_i2α sequence, flanked on one (IV) or both (RV) sides by a thymidine kinase (TK) marker, were disrupted by a Neo marker inserted into the Ncol site of exon 3. G418^RFIAU^R clones corresponding to ca. 4×10⁸ ES cells electroporated with replacement vectors were analyzed and revealed no targeting event. The insertion vector, however, was integrated by a single reciprocal recombination resulting in a duplication of homology (Hit step; G418^RFIAUS^S, which was lost-together with the plasmid and the TK sequences - by intrachromosomal recombination (Run step; G418^RFIAU^R). Thus, the Hit and Run strategy can be used with a selectable marker disrupting the targeted gene, giving rise to the same targeted product that would have been expected to arise from a double crossover with a replacement vector.     

Gene conversion during vector insertion in embryonic stem cells.

Recombination of an insertion vector into its chromosomal homologue is a conservative event in that both the chromosomal and the vector sequences are preserved. However, gene conversion may accompany homologous recombination of an insertion vector. To examine gene conversion in more detail we have determined the targeting frequencies and the structure of the recombinant alleles generated with a series of vectors which target the hprt gene in embryonic stem cells. We demonstrate that gene conversion of the introduced mutation does not significantly limit homologous recombination and that gene conversion occurs without a sequence specific bias for five different mutations. The frequency of the loss of a vector mutation and the gain of a chromosomal sequence is inversely proportional to the distance between the vector mutation and the double-strand break. The loss of a chromosomal sequence and the gain of a vector mutation occurs at a low frequency.     

High-fidelity gene targeting in embryonic stem cells by using sequence replacement vectors.

Mutations were targeted to the Hprt locus in murine embryonic stem cells by using sequence replacement vectors. When the vector was designed such that the mutated sequences were flanked on both sides by several kilobases of DNA homologous to the target locus, replacement of chromosomal sequences with the exogenous DNA occurred with precision. If, on the other hand, the target-homologous DNA on one arm of the vector was reduced to below 1 kb in length, the fidelity of recombination was diminished.     

Parameters determining the efficiency of gene targeting in the moss Physcomitrella patens

In the moss Physcomitrella patens, transforming DNA containing homologous sequences integrates predominantly by homologous recombination with its genomic target. A systematic investigation of the parameters that determine gene targeting efficiency shows a direct relationship between homology length and targeting frequency for replacement vectors (a selectable marker flanked by homologous DNA). Overall homology of only 1 kb is sufficient to achieve a 50% yield of targeted transformants. Targeting may occur through homologous recombination in one arm, accompanied by non-homologous end-joining by the other arm of the vector, or by allele replacement following two homologous recombination events. Allele replacement frequency depends on the symmetry of the targeting vector, being proportional to the length of the shorter arm. Allele replacement may involve insertion of multiple copies of the transforming DNA, accompanied by ectopic insertions at non-homologous sites. Single-copy and single insertions at targeted loci (targeted gene replacements, ‘TGR’) occur with a frequency of 7–20% of all transformants when the minimum requirements for allele replacement are met. Homologous recombination in Physcomitrella is substantially more efficient than in any multicellular eukaryote, recommending it as the outstanding model for the study of homologous recombination in plants.     

Reexamination of gene targeting frequency as a function of the extent of homology between the targeting vector and the target locus.

Mutations were targeted to the Hprt locus of mouse embryo-derived stem cells by using 22 different sequence replacement and sequence insertion vectors. The targeting frequency was examined at two sites within the Hprt locus as a function of the extent of homology between the targeting vector and the target locus. The targeting frequency was also compared by using vectors prepared from isogenic and nonisogenic DNA sources. With one exception, all of the vectors showed the same exponential dependence of targeting efficiency on the extent of homology between the targeting vector and the target locus. This was true regardless of whether they were sequence replacement or sequence insertion vectors, whether they were directed toward either of the two different sites within the Hprt locus, or whether they were prepared from isogenic or nonisogenic DNA sources. Vectors prepared from isogenic DNA targeted four to five times more efficiently than did the corresponding vectors prepared from nonisogenic DNA. The single case of unexpectedly low targeting efficiency involved one of the vectors prepared from nonisogenic DNA and could be attributed to an unfavorable distribution of heterology between the Hprt sequences present in the targeting vector and the endogenous Hprt gene.     

Parameters controlling the rate of gene targeting frequency in the protozoan parasite Leishmania.

In this study we investigated the role of several parameters governing the efficiency of gene targeting mediated by homologous recombination in the protozoan parasite Leishmania. We evaluated the relative targeting frequencies of different replacement vectors designed to target several sequences within the parasite genome. We found that a decrease in the length of homologous sequences <1 kb on one arm of the vector linearly influences the targeting frequency. No homologous recombination was detected, however, when the flanking homologous regions were <180 bp. A requirement for a very high degree of homology between donor and target sequences was found necessary for efficient gene targeting in Leishmania , as targeted recombination was strongly affected by base pair mismatches. Targeting frequency increased proportionally with copy number of the target only when the target was part of a linear amplicon, but remained unchanged when it was present on circles. Different chromosomal locations were found to be targeted with significantly variable levels of efficiency. Finally, different strains of the same species showed differences in gene targeting frequency. Overall, gene targeting mediated by homologous recombination in Leishmania shares similarities to both the yeast and the mammalian recombination systems.     

A system for rapid generation of coat color-tagged knockouts and defined chromosomal rearrangements in mice.

Gene targeting in mouse embryonic stem (ES) cells can be used to generate single gene mutations or defined multi-megabase chromosomal rearrangements when applied with the Cre- loxP recombination system. While single knockouts are essential for uncovering functions of cloned genes, chromosomal rearrangements are great genetic tools for mapping, mutagenesis screens and functional genomics. The conventional approach to generate mice with targeted alterations of the genome requires extensive molecular cloning to build targeting vectors and DNA-based genotyping for stock maintenance. Here we describe the design and construction of a two-library system to facilitate high throughput gene targeting and chromo-somal engineering. The unique feature of these libraries is that once a clone is isolated, it is essentially ready to be used for insertional targeting in ES cells. The two libraries each bear a complementary set of genetic markers tailored so that the vector can be used for Cre- loxP -based chromosome engineering as well as single knockouts. By incorporating mouse coat color markers into the vectors, we illustrate a widely applicable method for stock maintenance of ES cell-derived mice with single gene knockouts or more extensive chromosomal rearrangements.     

Effects of varying gene targeting parameters on processing of recombination intermediates by ERCC1-XPF

The ERCC1-XPF structure-specific endonuclease is necessary for correct processing of homologous recombination intermediates requiring the removal of end-blocking nonhomologies. We previously showed that targeting the endogenous CHO APRT locus with plasmids designed to generate such intermediates revealed defective recombination phenotypes in ERCC1 deficient cells, including suppression of targeted insertion and vector correction recombinants and the generation of a novel class of aberrant recombinants through a deletogenic mechanism. In the present study, we examined some of the mechanistic features of ERCC1-XPF in processing recombination intermediates by varying gene targeting parameters. These included altering the distance between the double-strand break (DSB) in the targeting vector and the inactivating mutation in the APRT target gene, and changing the position of the target gene mutation relative to the DSB to result in target mutations that were either upstream or downstream from the DSB. Increasing the distance from the DSB in the targeting vector to the chromosomal target gene mutation resulted in an ERCC1 dependent decrease in the efficiency of gene targeting from intermediates presenting lengthy end-blocking nonhomologies. This decrease was accompanied by a shift in the distribution of recombinant classes away from target gene conversions to targeted insertions in both wild-type and ERCC1 deficient cells, and a dramatic increase in the proportion of aberrant recombinants in ERCC1 deficient cells. Changing the position of the target gene mutation relative to the DSB in the plasmid also altered the distribution of targeted insertion subclasses recovered in wild-type cells, consistent with two-ended strand invasion followed by resolution into crossover-type products and vector integration. Our results confirm expectations from studies of Rad10-Rad1 in budding yeast that ERCC1-XPF activity affects conversion tract length, and provide evidence for the mechanism of generation of the novel, aberrant recombinant class first described in our previous study.     

Efficient gene targeting by homologous recombination in rat embryonic stem cells

The rat is the preferred experimental animal in many biological studies. With the recent derivation of authentic rat embryonic stem (ES) cells it is now feasible to apply state-of-the art genetic engineering in this species using homologous recombination. To establish whether rat ES cells are amenable to in vivo recombination, we tested targeted disruption of the hypoxanthine phosphoribosyltransferase (hprt) locus in ES cells derived from both inbred and outbred strains of rats. Targeting vectors that replace exons 7 and 8 of the hprt gene with neomycinR/thymidine kinase selection cassettes were electroporated into male Fisher F344 and Sprague Dawley rat ES cells. Approximately 2% of the G418 resistant colonies also tolerated selection with 6-thioguanine, indicating inactivation of the hprt gene. PCR and Southern blot analysis confirmed correct site-specific targeting of the hprt locus in these clones. Embryoid body and monolayer differentiation of targeted cell lines established that they retained differentiation potential following targeting and selection. This report demonstrates that gene modification via homologous recombination in rat ES cells is efficient, and should facilitate implementation of targeted, genetic manipulation in the rat.     

Targeting of the creatine kinase M gene in embryonic stem cells using isogenic and nonisogenic vectors.

Replacement vectors with genomic DNA originating from different mouse strains were used to introduce site-specific mutations into the creatine kinase M (CKM) gene of mouse embryonic stem (ES) cells. Here we demonstrate that in mouse strain 129-derived ES cells, the gene is at least 25-fold more efficiently targeted with an isogenic, 129-derived vector (129-pRV8.3) than with a nonisogenic, BALB/c-specific vector (BALB/c-pRV8.3). The two targeting constructs were identical except for allelic differences which were typed by partial sequencing. These included base pair mismatches (2%) and a polymorphic [GTC]-repeat length variation. Both in separate transfections as well as in cotransfections with mixed vectors, homologous disruption of the CKM gene resulted uniquely from the 129-isogenic DNA. Our data confirm earlier observations on requirements for homologous recombination in pro- and eukaryotic systems and indicate that targeting of the CKM locus is highly sensitive to small sequence differences between cognate segments in the endogenous and incoming DNA.     

ES Cell Cycle Rates Affect Gene Targeting Frequencies

We have investigated the gene targeting frequency at thehprtlocus in a range of embryonic stem cell lines selected for variations in cell cycle parameters. Our results show that targeting frequency varies with cell line by as much as 12-fold between nonisogenic lines and 3-fold between isogenic lines and that a nonisogenic line can support homologous recombination events by up to 21-fold more frequently than an isogenic line. This variation is consistent with both insertion and replacement vectors. These results can be explained by an inverse linear correlation of targeting frequencies with cell doubling times. Additionally, by reducing serum concentration in the culture medium the mean cell doubling time for R1 ES cells can be increased from 11.4 to 15.7 h, with a subsequent 15-fold decrease in gene targeting frequency. This change fits the correlation found for the different nonisogenic cell lines. Our observations have important implications when performing gene targeting experiments and explain some of the variation noted between experiments.     

High-frequency homologous recombination between duplicate chromosomal immunoglobulin mu heavy-chain constant regions.

Homologous recombination was used in a previous study to correct a 2-base-pair deletion in the third constant domain (Cmu3) of the haploid chromosomal mu gene in a mutant hybridoma cell line by transfer of a pSV2neo vector bearing a subfragment of the normal Cmu region (M.D. Baker, N. Pennell, L. Bosnoyan, and M.J. Shulman, Proc. Natl. Acad. Sci. USA 85:6432-6436, 1988). In these experiments, both gene replacement and single reciprocal crossover events were found to restore normal, cytolytic 2,4,6-trinitrophenyl-specific immunoglobulin M production to the mutant cells. In the cases of single reciprocal recombination, the structure of the recombinant mu gene is such that the normal Cmu region, in its correct position 3' of the expressed 2,4,6-trinitrophenyl-specific heavy-chain variable region, is separated from the mutant Cmu region by the integrated vector sequences. I report here that homologous recombination occurs with high frequency between the duplicate Cmu regions in mitotically growing hybridoma cells. The homologous recombination events were easily detected since they generated hybridomas that were phenotypically different from the parental cells. Analysis of the recombinant cells suggests that gene conversion is the most frequent event, occurring between 60 and 73% of the time. The remaining events consisted of single reciprocal crossovers. Intrachromatid double reciprocal recombination was not detected. The high frequency of recombination, the ability to isolate and analyze the participants in the recombination reactions, and the capacity to generate specific modifications in the immunoglobulin Cmu regions by gene targeting suggest that this system will be useful for studying mammalian chromosomal homologous recombination. Moreover, the ability to specifically modify the chromosomal immunoglobulin genes by homologous recombination should facilitate studies of immunoglobulin gene regulation and expression and provide a more convenient of engineering specifically modified antibody.     

Replacement-like recombination induced by an integration vector with a murine homology flank at the immunoglobulin heavy-chain locus in mouse and rat hybridoma cells

Vectors for homologous recombination are commonly designed as replacement or integration constructs. We have evaluated integration vectors for the substitution of the immunoglobulin heavy-chain constant region by various human isotypes in mouse and rat hybridomas. It is known that under certain circumstances replacement vectors exhibit a lower target efficiency and can be incorporated by integration events. Conversely, we show here that an integration vector can undergo a replacement event despite having free homologous adjacent DNA ends, which would be expected to initiate integration according to the double-strand break repair model. Moreover, in cases of replacement recombination the 5 crossover is not necessarily located within the homology region, thereby giving rise to a truncated gene product. Whether or not the replacement leads to such deletions is clearly dependent on the isotypes involved in the targeting reaction. The fact that the vector is correctly targeted to the heavy-chain locus, but that the homology region is not always the site of recombination, points to a novel recombination mechanism that may be specific for the immunoglobulin loci and that seems to be predominant even in the presence of the free homologous adjacent ends of an integration vector. Furthermore we demonstrate that homologous recombination at the heavy-chain locus is also possible between sequences from different species. The implications of our findings for the production of chimeric antibodies are discussed.