Enhanced Photoluminescence and Raman Properties of Al-Doped ZnO Nanostructures Prepared Using Thermal Chemical Vapor Deposition of Methanol Assisted with Heated Brass

Vapor phase transport (VPT) assisted by mixture of methanol and acetone via thermal evaporation of brass (CuZn) was used to prepare un-doped and Al-doped zinc oxide (ZnO) nanostructures (NSs). The structure and morphology were characterized by field emission scanning electron microscopy (FESEM) and x-ray diffraction (XRD). Photoluminescence (PL) properties of un-doped and Al-doped ZnO showed significant changes in the optical properties providing evidence for several types of defects such as zinc interstitials (Zn_i), oxygen interstitials (O_i), zinc vacancy (V_zn), singly charged zinc vacancy (V_Zn ^-), oxygen vacancy (V_o), singly charged oxygen vacancy (V_o ⁺) and oxygen anti-site defects (O_Zn) in the grown NSs. The Al-doped ZnO NSs have exhibited shifted PL peaks at near band edge (NBE) and red luminescence compared to the un-doped ZnO. The Raman scattering results provided evidence of Al doping into the ZnO NSs due to peak shift from 145 cm^-1 to an anomalous peak at 138 cm^-1. Presence of enhanced Raman signal at around 274 and 743 cm^-1 further confirmed Al in ZnO NSs. The enhanced D and G band in all Al-doped ZnO NSs shows possible functionalization and doping process in ZnO NSs.     

Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV‐assisted) approach using Na2SeO3 as Se source and investigating optical properties

In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na₂SeO₃ as the Se source by a rapid and room temperature photochemical (UV‐assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV–visible (UV–vis) spectroscopy, Fourier transform‐infrared (FT‐IR), and energy dispersive X‐ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round‐shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the ²T₂ acceptor levels of Cu²⁺. The emission was increased by increasing the Cu²⁺ ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%.     

Blue emitting ZnO nanostructures grown through cellulose bio‐templates

This paper presents a green and cost‐effective recipe for the synthesis of blue‐emitting ZnO nanoparticles (NPs) using cellulose bio‐templates. Azadirachta indica (neem) leaf extract prepared in different solvents were used as biological templates to produce nanostructures of wurtzite ZnO with a particle size ~12–36 nm. A cellulose‐driven capping mechanism is used to describe the morphology of ZnO NPs. The scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier transform infra‐red (FTIR) and photoluminescence (PL) studies showed that solvents affect the growth process and the capping mechanism of bio‐template severely. Structural changes in ZnO NPs were evident with variation in pH, dielectric constants (DC) and boiling points (BP) of solvents. Furthermore, an energy band model is proposed to explain the origin of the blue emission in the as‐obtained ZnO NPs. PL excitation studies and the theoretical enthalpy values of individual defects were used to establish the association between the interstitial‐zinc‐related defect levels and the blue emission. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of capping agent concentration on thermoluminescence and photoluminescence of copper‐doped zinc sulfide nanoparticles

Copper‐doped zinc sulfide (ZnS:Cu) nanoparticles with varying concentrations of capping agent were prepared using a chemical route technique. These particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy and X‐ray diffraction (XRD). Optical absorption studies showed that the absorption edge shifted towards the blue region as the concentration of the capping agent increased. Using effective mass approximation, calculation of the nanoparticle size indicated that effective band gap energy increases with decreasing particle size. The thermoluminescence (TL) properties of sodium hexameta phosphate (SHMP)‐passivated ZnS:Cu nanoparticles were investigated after UV irradiation at room temperature. The TL glow curve of capped ZnS:Cu showed variations in TL peak position and intensity with the change in capping agent concentration. The photoluminescence (PL) spectra of ZnS:Cu nanoparticles excited at 254 nm exhibited a broad green emission band peaking around 510 nm, which confirmed the characteristic feature of Zn²⁺ as well as Cu²⁺ ions as the luminescent centres in the lattice. The PL spectra of ZnS:Cu nanoparticles with increasing capping agent concentrations revealed that the emission becomes more intense and shifted towards shorter wavelengths as the sizes of the samples were reduced. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation and optical properties of alloyed ZnxCd1‐xS/alginate core/shell nanoparticles

Zn_xCd_1‐xS/alginate core/shell nanoparticles were synthesized via a colloidal route by reacting zinc and cadmium ions with sulfide ions, followed by coating with alginate. The crystal structure, morphology, size and optical properties of the core/shell nanoparticles were characterized by X‐ray diffraction, transmission electron microscopy, UV/vis and photoluminescent spectra, respectively. The Zn_xCd_1‐xS nanoparticles are spherical and have a cubic structure with a mean crystalline size of 2–4 nm. The band gap of Zn_xCd_1‐xS/alginate core/shell nanoparticles increases with increasing Zn/Cd molar ratio, and the UV/vis absorption blue‐shifts correspondingly. Two emissions related to zinc and sulfide ion vacancies were observed for the Zn_xCd_1‐xS/alginate core/shell nanoparticles due to the surface changes from the alginate coating. A cadmium‐related emission was observed for both the uncovered Zn_xCd_1‐xS and Zn_xCd_1‐xS/alginate core/shell nanoparticles, which has a significant blue‐shift with increasing Zn/Cd molar ratio. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and luminescent properties of a novel bluish‐white afterglow phosphor,b‐Zn3(PO4)2:Hf4+

A new bluish‐white long‐lasting phosphorescent material, Hf⁴⁺‐doped b‐Zn₃(PO₄)₂, was prepared by the conventional high‐temperature solid‐state method. The photoluminescence (PL) spectrum reveals that it exhibits a strong blue emission band centred at 470 nm, with asymmetry on the long wavelength side; this material emits bluish‐white light and shows strong afterglow phosphorescence after it is excited with a 254 nm UV lamp. The phosphorescence lasts nearly 40 min in the light perception of the dark‐adapted human eye (0.32 mcd/m²). The possible phosphorescence mechanism is also analysed. Copyright © 2008 John Wiley & Sons, Ltd.     

Influence of thiol capping on the photoluminescence properties of L‐cysteine‐, mercaptoethanol‐ and mercaptopropionic acid‐capped ZnS nanoparticles

Mercaptoethanol (ME), mercaptopropionic acid (MPA) and L‐cysteine (L‐Cys) having ‐SH functional groups were used as surface passivating agents for the wet chemical synthesis of ZnS nanoparticles. The effect of the thiol group on the optical and photoluminescence (PL) properties of ZnS nanoparticles was studied. L‐Cysteine‐capped ZnS nanoparticles showed the highest PL intensity among the studied capping agents, with a PL emission peak at 455 nm. The PL intensity was found to be dependent on the concentration of Zn²⁺ and S^2– precursors. The effect of buffer on the PL intensity of L‐Cys‐capped ZnS nanoparticles was also studied. UV/Vis spectra showed blue shifting of the absorption edge. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural characterization of Er3+,Yb3+‐doped Gd2O3 phosphor,synthesized using the solid‐state reaction method,and its luminescence behavior

We report the synthesis and structural characterization of Er³⁺,Yb³⁺‐doped Gd₂O₃ phosphor. The sample was prepared using the conventional solid‐state reaction method, which is the most suitable method for large‐scale production. The prepared phosphor sample was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermoluminescence (TL), photoluminescence (PL) and CIE techniques. For PL studies, the excitation and emission spectra of Gd₂O₃ phosphor doped with Er³⁺ and Yb³⁺ were recorded. The excitation spectrum was recorded at a wavelength of 551 nm and showed an intense peak at 276 nm. The emission spectrum was recorded at 276 nm excitation and showed peaks in all blue, green and red regions, which indicate that the prepared phosphor may act as a single host for white light‐emitting diode (WLED) applications, as verified by International de I'Eclairage (CIE) techniques. From the XRD data, the calculated average crystallite size of Er³⁺ and Yb³⁺‐doped Gd₂O₃ phosphor is ~ 38 nm. A TL study was carried out for the phosphor using UV irradiation. The TL glow curve was recorded for UV, beta and gamma irradiations, and the kinetic parameters were also calculated. In addition, the trap parameters of the prepared phosphor were also studied using computerized glow curve deconvolution (CGCD). Copyright © 2015 John Wiley & Sons, Ltd.     

Micro‐photoluminescence of single living diatom cells

Diatoms are single‐celled microalgae that possess a nanostructured, porous biosilica shell called a frustule. This study characterized the micro‐photoluminescence (μ‐PL) emission of single living cells of the photosynthetic marine diatom Thalassiosira pseudonana in response to UV laser irradiation at 325 nm using a confocal Raman microscope. The photoluminescence (PL) spectrum had two primary peaks, one centered at 500–510 nm, which was attributed to the frustule biosilica, and a second peak at 680 nm, which was attributed to auto‐fluorescence of photosynthetic pigments. The portion of the μ‐PL emission spectrum associated with biosilica frustule in the single living diatom cell was similar to that from single biosilica frustules isolated from these diatom cells. The PL emission by the biosilica frustule in the living cell emerged only after cells were cultivated to silicon depletion. The discovery of the discovery of PL emission by the frustule biosilica within a single living diatom itself, not just its isolated frustule, opens up future possibilities for living biosensor applications, where the interaction of diatom cells with other molecules can be probed by μ‐PL spectroscopy. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterization,antibacterial, antioxidant,and cytotoxic activities of ZnO nanoparticles using Coptidis Rhizoma

Here, we report a simple, eco-friendly and inexpensive approach for the synthesis of zinc oxide nanoparticles (ZnO NPs) using Coptidis Rhizoma. The ZnO NPs were characterized by UV–visible absorption spectroscopy, FTIR, SEM-EDX, TGA, TEM, SAED and XRD. TEM images confirmed the presence of spherical and rod shaped ZnO NPs in the range of 2.90–25.20 nm. Green synthesized ZnO NP_S exhibited moderate antibacterial activity against Gram-positive and Gram-negative bacteria and excellent DPPH free radical scavenging activity. Synthesized ZnO NPs had no toxic effects on the RAW 264.7 cell line.     

CdSe and CdSe/CdS core–shell QDs: New approach for synthesis,investigating optical properties and application in pollutant degradation

In this work, CdSe quantum dots (QDs) were synthesized by a simple and rapid microwave activated approach using CdSO₄, Na₂SeO₃ as precursors and thioglycolic acid (TGA) as capping agent molecule. A novel photochemical approach was introduced for the growth of CdS QDs and this approach was used to grow a CdS shell around CdSe cores for the formation of a CdSe/CdS core–shell structure. The core–shells were structurally verified using X‐ray diffraction, transmission electron microscopy and FTIR (Fourier‐transform infrared (FTIR)) spectroscopy. The optical properties of the samples were examined by means of UV–Vis and photoluminescence (PL) spectroscopy. It was found that CdS QDs emit a broad band white luminescence between 400 to 700 nm with a peak located at about 510 nm. CdSe QDs emission contained a broad band resulting from trap states between 450 to 800 nm with a peak located at 600 nm. After CdS shell growth, trap states emission was considerably quenched and a near band edge emission was appeared about 480 nm. Optical studies revealed that the core–shell QDs possess strong ultraviolet (UV) ? visible light photocatalytic activity. CdSe/CdS core–shell QDs, showed an enhancement in photodegradation of Methyl orange (MO) compared with CdSe QDs.     

Luminescence study and dosimetry approach of Ce on an α‐Sr2P2O7 phosphor synthesized by a high‐temperature combustion method

We report synthesis of a cerium‐activated strontium pyrophosphate (Sr₂P₂O₇) phosphor using a high‐temperature combustion method. Samples were characterized by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), photoluminescence (PL) and thermoluminescence (TL). The XRD pattern reveals that Sr₂P₂O₇ has an α‐phase with crystallization in the orthorhombic space group of Pnam. The IR spectrum of α‐Sr₂P₂O₇ displays characteristic bands at 746 and 1190 cm^‐1 corresponding to the absorption of (P₂O₇)^‐4. PL emission spectra exhibit a broad emission band around 376 nm in the near‐UV region due to the allowed 5d–4f transition of cerium and suggest its applications in a UV light‐emitting diode (LED) source. PL also reveals that the emission originates from 5d–4f transition of Ce³⁺ and intensity increases with doping concentration. TL measurements made after X‐ray irradiation, manifest a single intense glow peak at around 192°C, which suggests that this is an outstanding candidate for dosimetry applications. The kinetic parameters, activation energy and frequency factor of the glow curve were calculated using different analysis methods. Copyright © 2014 John Wiley & Sons, Ltd.     

Use of ZnO:Tb down‐conversion phosphor for Ag nanoparticle plasmon absorption using a He–Cd ultraviolet laser

Although noble metal nanoparticles (NPs) have attracted some attention for potentially enhancing the luminescence of rare earth ions for phosphor lighting applications, the absorption of energy by NPs can also be beneficial in biological and polymer applications where local heating is desired, e.g. photothermal applications. Strong interaction between incident laser light and NPs occurs only when the laser wavelength matches the NP plasmon resonance. Although lasers with different wavelengths are available and the NP plasmon resonance can be tuned by changing its size and shape or the dielectric medium (host material), in this work, we consider exciting the plasmon resonance of Ag NPs indirectly with a He–Cd UV laser using the down‐conversion properties of Tb³⁺ ions in ZnO. The formation of Ag NPs was confirmed by X‐ray diffraction, transmission electron microscopy and UV–vis diffuse reflectance measurements. Radiative energy transfer from the Tb³⁺ ions to the Ag NPs resulted in quenching of the green luminescence of ZnO:Tb and was studied by means of spectral overlap and lifetime measurements. The use of a down‐converting phosphor, possibly with other rare earth ions, to indirectly couple a laser to the plasmon resonance wavelength of metal NPs is therefore successfully demonstrated and adds to the flexibility of such systems. Copyright © 2016 John Wiley & Sons, Ltd.     

Ca2Al2SiO7:Ce3+ phosphors for mechanoluminescence dosimetry

A series of Ce³⁺ ion single‐doped Ca₂Al₂SiO₇ phosphors was synthesized by a combustion‐assisted method at an initiating temperature of 600 °C. The samples were annealed at 1100 °C for 3 h and their X‐ray diffraction patterns confirmed a tetragonal structure. The phase structure, particle size, surface morphology and elemental analysis were analyzed using X‐ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscopy (SEM) and energy dispersive X‐ray (EDX) spectroscopy techniques. Thermoluminescence (TL) intensity increased with increase in ultraviolet (UV) light exposure time up to 15 min. With further increase in the UV irradiation time the TL intensity decreases. The increase in TL intensity indicates that trap concentration increased with UV exposure time. A broad peak at 121 °C suggested the existence of a trapping level. The peak of mechanoluminescence (ML) intensity versus time curve increased linearly with increasing impact velocity of the moving piston. Mechanoluminescence intensity increased with increase in UV irradiation time up to 15 min. Under UV‐irradiation excitation, the TL and ML emission spectra of Ca₂Al₂SiO₇:Ce³⁺ phosphor showed the characteristic emission of Ce³⁺ peaking at 400 nm (UV–violet) and originating from the Ce³⁺ transitions of 5d‐4f (²F_5/2 and ²F_7/2). The photoluminescence (PL) emission spectra for Ca₂Al₂SiO₇:Ce³⁺ were similar to the ML/TL emission spectra. The mechanism of ML excitation and the suitability of the Ca₂Al₂SiO₇:Ce³⁺phosphor for radiation dosimetry are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

In vitro antidiabetic,antioxidant, antimicrobial,and cytotoxic activity of Murraya koenigii leaf extract intercedes ZnO nanoparticles

Nanotechnology is an emerging field with tremendous potential and usage of medicinal plants and green preparation of nanoparticles (NPs) is one of the widely explored areas. These have been shown to be effective against different biological activities such as diabetes mellitus, cancer, antioxidant, antimicrobial, etc. The current studies focus on the green synthesis of zinc NPs (ZnO NPs) from aqueous leaf extract of Murraya koenigii (MK). The synthesized Murraya koeingii zinc oxide NPs (MK ZnO NPs) were characterized using UV–visible spectroscopy, dynamic light scattering (DLS), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), energy-dispersive spectrum (EDS) and cyclic voltammetry (CV). The synthesized MK ZnO NPs were evaluated for their in vitro antidiabetic, antioxidant, antimicrobial, and cytotoxic activity. They demonstrated significant antidiabetic and cytotoxic activity, as well as moderate free-radical scavenging and antibacterial activity.     

Binary Indium–Zinc Oxide Photoanodes for Efficient Dye‐Sensitized Solar Cells

The benefits of incorporating binary metal‐oxide electrodes en route toward efficient dye‐sensitized solar cells (DSSCs) have recently emerged. The current work aims at realizing efficient indium‐doped zinc oxide based DSSCs by means of enhancing charge transport processes and reducing recombination rates. Electrochemical impedance spectroscopic assays corroborate that low amounts of indium reduce charge transport resistances and increase electron recombination resistances. The latter are in concert with a remarkable enhancement of the charge collection efficiency from 33% to 83% for devices with ZnO and In₁₅Zn₈₅O photoanodes, respectively. Going beyond 15 mol% of indium, an effective electron trapping increases the charge transport resistance and, in turn, dramatically reduces charge collection efficiency. Upon implementing In₁₅Zn₈₅O into an electron cascade photoanode architecture featuring an In₁₅Zn₈₅O bottom layer and a ZnO top layer, a device efficiency of 5.77% and a significantly high current density of 20.4 mA cm^?2 in binary ZnO DSSCs are achieved.     

Hydrothermal growth of Zn2SnO4:Eu,Ca for red emission

Zinc stannate (Zn₂SnO₄) and Zn₂SnO₄ codoped with Eu³⁺ and Ca²⁺ (ZTO:Eu,Ca) were synthesized by hydrothermal method and characterized with X‐ray diffraction (XRD), energy‐dispersive X‐ray analysis (EDAX), Raman spectrometer, field emission scanning electron microscopy (FESEM), ultraviolet‐visible (UV‐vis) and photoluminescence (PL) spectrophotometers. PL analysis of Zn₂SnO₄ gives broad defect induced emission in the region 500–750 nm. The crystal structure of Zn₂SnO₄ was retained even with a nominal doping of Eu, Ca and its combination in the Zn₂SnO₄. The Eu³⁺ ions were found to occupy the non‐centrosymmetric sites of the Zn₂SnO₄ and gave emissions at 592, 615 and 702 nm. Zn₂SnO₄:Eu,Ca showed red emission at 615 nm attributed to the electronic transition from the excited state ⁵D₀ → ⁷F₂ of the 4f⁶ configuration of Eu³⁺. Nominal codoping of Eu³⁺ and Ca²⁺ ions promoted the quenching of orange emission from Eu³⁺ in Zn₂SnO₄:Eu,Ca.     

Dark‐red‐emitting CdTe/Cd1‐xZnxS core/shell quantum dots: preparation and properties

CdTe nanocrystals (NCs) were fabricated through an organic synthesis. The growth and properties of CdTe NCs depended strongly on the preparation conditions. In a reaction system of octadecene and tetradecylphosphonic acid (TDPA), the growth was slow. CdTe NCs with cubic‐like morphology were created in trioctylamine (TOA) using octadecylphosphonic acid (ODPA)‐CdO or TDPA‐CdO as precursors. The TOA and ODPA system gives rise to NCs with high photoluminescence (PL) efficiencies (12%). A Cd_xZn_1‐xS shell coating on the CdTe core, gave rise to tunable dark red PL (630–670 nm). The morphology and PL properties of the CdTe cores were drastically affected by shell coating and this determined the properties of CdTe/Cd_xZn_1‐xS NCs. Small CdTe NCs were easily coated with Cd_xZn_1‐xS shells. The resulting core/shell NCs revealed a spherical morphology. However, shell growth became slow when large CdTe cores were used. This is ascribed to the cores with a cubic‐like morphology. CdS interlayer plays an important role for the formation of the CdTe/Cd_xZn_1‐xS NCs because the experimental result indicated it is difficult to coat CdTe NCs with a ZnS shell. The core/shell NCs benefited from a Cd_xZn_1‐xS composite shell because CdTe/CdS NCs created via a similar procedure revealed a low PL efficiency. Copyright © 2012 John Wiley & Sons, Ltd.     

Probing the optical properties and luminescence mechanism of a UV‐emitting SrBPO5:Ce3+ phosphor

Ce‐doped (1 × 10^?5 to 3.0 mol%) SrBPO₅ phosphors were synthesized using a conventional solid‐state reaction route at 1273 K in an air atmosphere. Phase and morphology of the samples were studied from powder X‐ray diffraction (XRD) patterns and scanning electron microscope (SEM) micrographs, respectively. The band gap energies of the pure and Ce‐doped SrBPO₅ phosphors were calculated from the recorded diffuse reflectance spectra. Photoluminescence (PL) and Ce³⁺ lifetime were recorded at 300 and 77 K. Photoluminescence lifetime measurements revealed two‐lifetime values for Ce³⁺ at both 300 K (17 and 36 nsec) and 77 K (12 and 30 nsec), suggesting the presence of two different environments around Ce³⁺. Time‐resolved emission spectroscopy (TRES) studies confirmed the presence of Ce³⁺ in two different environments. In addition, SrBPO₅:Ce exhibited intense UV emission, signifying its possible use as an efficient sensitizer for solid‐state lighting applications. The effect of γ‐irradiation on PL was also determined. Thermally stimulated luminescence (TSL) glow curves of the γ‐irradiated phosphor, along with trap parameters, dose–response, and the possible TSL mechanism were also investigated. Positron annihilation lifetime spectroscopy was carried out to probe defects present in undoped and Ce‐doped SrBPO₅.     

Sub‐lethal UV‐C radiation induces callose,hydrogen peroxide and defence‐related gene expression in Arabidopsis thaliana

Exposure of plants to UV‐C irradiation induces gene expression and cellular responses that are commonly associated with wounding and pathogen defence, and in some cases can lead to increased resistance against pathogen infection. We examined, at a physiological, molecular and biochemical level, the effects of and responses to, sub‐lethal UV‐C exposure on Arabidopsis plants when irradiated with increasing dosages of UV‐C radiation. Following UV‐C exposure plants had reduced leaf areas over time, with the severity of reduction increasing with dosage. Severe morphological changes that included leaf glazing, bronzing and curling were found to occur in plants treated with the 1000 J·m^?2 dosage. Extensive damage to the mesophyll was observed, and cell death occurred in both a dosage‐ and time‐dependent manner. Analysis of H₂O₂ activity and the pathogen defence marker genes PR1 and PDF1.2 demonstrated induction of these defence‐related responses at each UV‐C dosage tested. Interestingly, in response to UV‐C irradiation the production of callose (β‐1,3‐glucan) was identified at all dosages examined. Together, these results show plant responses to UV‐C irradiation at much lower doses than have previously been reported, and that there is potential for the use of UV‐C as an inducer of plant defence.