Rapid ethanol fermentation of cellulose hydrolysate. I. Batch versus continuous systems

Rapid fermentation of bagasse hydrolysate to ethanol under anaerobic conditions by a strain of Saccharomyces cerevisiae has been studied in batch and continuous cultures at pH 4.0 and 30°C temperature with cell recycle. By using a 23.6 g/liter cell concentration, a concentation of 9.7% (w/v)ethanol was developed in a period of 6 hr. The rate of fermentation was found to increase with supplementation of yeast vitamins in the hydrolysate. In continuous culture employing cell recycle and a 0.127 v/v/m air flow rate, a cell mass concentration of 48.5 g/liter has been achieved. The maximum fermentor productivity of ethanol obtained under these conditions was 32.0 g/liter/hr, which is nearly 7.5 times higher than the normal continuous process without cell recycle and air sparging. The ethanol productivity was found to decrease linearly with ethanol concentration. Conversion of glucose in the hydrolysate to ethanol was achieved with a yield of 95 to 97% of theoretical.     

An innovative consecutive batch fermentation process for very high gravity ethanol fermentation with self-flocculating yeast

An innovative consecutive batch fermentation process was developed for very high gravity (VHG) ethanol fermentation with the self-flocculating yeast under high biomass concentration conditions. On the one hand, the high biomass concentration significantly shortened the time required to complete the VHG fermentation and the duration of yeast cells suffering from strong ethanol inhibition, preventing them from losing viability and making them suitable for being repeatedly used in the process. On the other hand, the separation of yeast cells from the fermentation broth by sedimentation instead of centrifugation, making the process economically more competitive. The VHG medium composed of 255 g L⁻¹ glucose and 6.75 g L⁻¹ each of yeast extract and peptone was fed into the fermentation system for nine consecutive batch fermentations, which were completed within 8–14 h with an average ethanol concentration of 15% (v/v) and ethanol yield of 0.464, 90.8% of its theoretical value of 0.511. The average ethanol productivity that was calculated with the inclusion of the downstream time for the yeast flocs to settle from the fermentation broth and the supernatant to be removed from the fermentation system was 8.2 g L⁻¹ h⁻¹, much higher than those previously reported for VHG ethanol fermentation and regular ethanol fermentation with ethanol concentration around 12% (v/v) as well.     

Very high gravity ethanol fermentation by flocculating yeast under redox potential-controlled conditions

ABSTRACT: BACKGROUND: Very high gravity (VHG) fermentation using medium in excess of 250 g/L sugars for more than 15 % (v) ethanol can save energy consumption, not only for ethanol distillation, but also for distillage treatment; however, stuck fermentation with prolonged fermentation time and more sugars unfermented is the biggest challenge. Controlling redox potential (ORP) during VHG fermentation benefits biomass accumulation and improvement of yeast cell viability that is affected by osmotic pressure and ethanol inhibition, enhancing ethanol productivity and yield, the most important techno-economic aspect of fuel ethanol production. RESULTS: Batch fermentation was performed under different ORP conditions using the flocculating yeast and media containing glucose of 201 [PLUS-MINUS SIGN] 3.1, 252 [PLUS-MINUS SIGN] 2.9 and 298 [PLUS-MINUS SIGN] 3.8 g/L. Compared with ethanol fermentation by non-flocculating yeast, different ORP profiles were observed with the flocculating yeast due to the morphological change associated with the flocculation of yeast cells. When ORP was controlled at [MINUS SIGN]100 mV, ethanol fermentation with the high gravity (HG) media containing glucose of 201 [PLUS-MINUS SIGN] 3.1 and 252 [PLUS-MINUS SIGN] 2.9 g/L was completed at 32 and 56 h, respectively, producing 93.0 [PLUS-MINUS SIGN] 1.3 and 120.0 [PLUS-MINUS SIGN] 1.8 g/L ethanol, correspondingly. In contrast, there were 24.0 [PLUS-MINUS SIGN] 0.4 and 17.0 [PLUS-MINUS SIGN] 0.3 g/L glucose remained unfermented without ORP control. As high as 131.0 [PLUS-MINUS SIGN] 1.8 g/L ethanol was produced at 72 h when ORP was controlled at [MINUS SIGN]150 mV for the VHG fermentation with medium containing 298 [PLUS-MINUS SIGN] 3.8 g/L glucose, since yeast cell viability was improved more significantly. CONCLUSIONS: No lag phase was observed during ethanol fermentation with the flocculating yeast, and the implementation of ORP control improved ethanol productivity and yield. When ORP was controlled at [MINUS SIGN]150 mV, more reducing power was available for yeast cells to survive, which in turn improved their viability and VHG ethanol fermentation performance. On the other hand, controlling ORP at [MINUS SIGN]100 mV stimulated yeast growth and enhanced ethanol production under the HG conditions. Moreover, the ORP profile detected during ethanol fermentation with the flocculating yeast was less fluctuated, indicating that yeast flocculation could attenuate the ORP fluctuation observed during ethanol fermentation with non-flocculating yeast.     

Inhibition of yeast by lactic acid bacteria in continuous culture: nutrient depletion and/or acid toxicity?

Lactic acid was added to batch very high gravity (VHG) fermentations and to continuous VHG fermentations equilibrated to steady state with Saccharomyces cerevisiae. A 53% reduction in colony-forming units (CFU) ml^–1 of S. cerevisiae was observed in continuous fermentation at an undissociated lactic acid concentration of 3.44% w/v; and greater than 99.9% reduction was evident at 5.35% w/v lactic acid. The differences in yeast cell number in these fermentations were not due to pH, since batch fermentations over a pH range of 2.5–5.0 did not lead to changes in growth rate. Similar fermentations performed in batch showed that growth inhibition with added lactic acid was nearly identical. This indicates that the apparent high resistance of S. cerevisiae to lactic acid in continuous VHG fermentations is not a function of culture mode. Although the total amount of ethanol decreased from 48.7 g l^–1 to 14.5 g l^–1 when 4.74% w/v undissociated lactic acid was added, the specific ethanol productivity increased ca. 3.2-fold (from 7.42×10^–7 g to 24.0×10^–7 g ethanol CFU^–1 h^–1), which indicated that lactic acid stress improved the ethanol production of each surviving cell. In multistage continuous fermentations, lactic acid was not responsible for the 83% (CFU ml^–1) reduction in viable S. cerevisiae yeasts when Lactobacillus paracasei was introduced to the system at a controlled pH of 6.0. The competition for trace nutrients in those fermentations and not lactic acid produced by L. paracasei likely caused the yeast inhibition.     

Selection of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> strains for efficient very high gravity bio-ethanol fermentation processes

An optimized very high gravity (VHG) glucose medium supplemented with low cost nutrient sources was used to evaluate bio-ethanol production by 11 Saccharomyces cerevisiae strains. The industrial strains PE-2 and CA1185 exhibited the best overall fermentation performance, producing an ethanol titre of 19.2% (v/v) corresponding to a batch productivity of 2.5 g l⁻¹ h⁻¹, while the best laboratory strain (CEN.PK 113-7D) produced 17.5% (v/v) ethanol with a productivity of 1.7 g l⁻¹ h⁻¹. The results presented here emphasize the biodiversity found within S. cerevisiae species and that naturally adapted strains, such as PE-2 and CA1185, are likely to play a key role in facilitating the transition from laboratory technological breakthroughs to industrial-scale bio-ethanol fermentations.     

Effect of oleic acid on the production of ethanol and fructose from glucose/fructose mixtures in an immobilized cell reactor

Saccharomyces cerevisiae ATCC 39859 was immobilized onto small cubes of wood to produce ethanol and very enriched fructose syrup from glucose/fructose mixtures through the selective fermentation of glucose. A maximum ethanol productivity of 21.9 g/l-h was attained from a feed containing 9.7% (w/v) glucose and 9.9% (w/v) fructose. An ethanol concentration, glucose conversion and fructose yield of 29.6 g/l, 62% and 99% were obtained, respectively. This resulted in a final fructose/glucose ratio of 2.7. At lower ethanol productivity levels the fructose/glucose ratio increases, as does the ethanol concentration in the effluent. The addition of 30 mg/l oleic acid to the medium increased the ethanol productivity and its concentration by 13% at a dilution rate of 0.74 h^?1.     

Continuous fermentation of high-strength glucose feeds to ethanol

Summary Aqueous feeds of 413 and 495 g/L glucose were fermented to ethanol at 90–95% conversion in a continuous flow extractive fermentation system with cell recycle. Compared to the continuous conventional fermentation of a 195 g/L glucose medium, the volumetric productivity was more than doubled in extractive mode, with no deleterious effects on cell viability, specific glucose consumption rate or ethanol yield. The use of an effective, biocompatible and stable in situ extractant with flash vaporization can also produce a concentrated ethanol vapour stream, reducing distillation costs of the product.     

Optimization of batch alcoholic fermentation of glucose syrup substrate

The quantitative effects of substrate concentration, yeast concentration, and nutrient supplementation on ethanol content, fermentation time, and ethanol productivity were investigated in a Box–Wilson central composite design experiment, consisting of five levels of each variable, High substrate concentration, up to 30° Brix, resulted in higher ethanol content (i.e., up to 15.7% w/v or 19.6% v/v) but longer fermentation time and hence lower ethanol productivity. Increasing yeast concentration, on the other hand, resulted in shorter fermentation time and higher productivity. The highest ethanol productivity of about 21 g EiOH/L h was obtained at low substrate concentration (i.e., 12° Brix), low alcohol content (i.e., 6% by weight), high yeast concentration (i.e., 4.4%), and high supplementation of yeast extract (i.e., 2.8). Productivity of this magnitude is substantially higher that that of the traditional batch fermentation of fed-batch fermentation. It is comparable to the results of continuous fermentation but lower than those of vacuum fermentation but lower than those of vacuum fermentation. Optimal conditions for maximal ethanol productivity can be established by a multiple regression analysis technique and by plotting the contours of constant response to conform to the constraints of individual operations.     

Extractive fermentation by Zymomonas mobilis and the control of oscillatory behavior

Summary Extractive fermentation is shown to greatly improve the performance ofZymomonas mobilis in continuous culture during the conversion of concentrated substrates to ethanol, and it is also used to eliminate the oscillatory behavior often exhibited byZ. mobilis in conventional fermentations. An ethanol productivity of 15.6 g/Lh is achieved with the near-conversion of a 295 g/L glucose feed at a medium dilution rate of 0.11 h^–1 and solvent dilution rate of 1.5 h^–1. This is more than triple the productivity obtained during conventional fermentation of a 135 g/L glucose feed at the same medium dilution rate.     

Multi-stage high cell continuous fermentation for high productivity and titer

We carried out the first simulation on multi-stage continuous high cell density culture (MSC-HCDC) to show that the MSC-HCDC can achieve batch/fed-batch product titer with much higher productivity to the fed-batch productivity using published fermentation kinetics of lactic acid, penicillin and ethanol. The system under consideration consists of n-serially connected continuous stirred-tank reactors (CSTRs) with either hollow fiber cell recycling or cell immobilization for high cell-density culture. In each CSTR substrate supply and product removal are possible. Penicillin production is severely limited by glucose metabolite repression that requires multi-CSTR glucose feeding. An 8-stage C-HCDC lactic acid fermentation resulted in 212.9 g/L of titer and 10.6 g/L/h of productivity, corresponding to 101 and 429% of the comparable lactic acid fed-batch, respectively. The penicillin production model predicted 149% (0.085 g/L/h) of productivity in 8-stage C-HCDC with 40 g/L of cell density and 289% of productivity (0.165 g/L/h) in 7-stage C-HCDC with 60 g/L of cell density compared with referring batch cultivations. A 2-stage C-HCDC ethanol experimental run showed 107% titer and 257% productivity of the batch system having 88.8 g/L of titer and 3.7 g/L/h of productivity. MSC-HCDC can give much higher productivity than batch/fed-batch system, and yield a several percentage higher titer as well. The productivity ratio of MSC-HCDC over batch/fed-batch system is given as a multiplication of system dilution rate of MSC-HCDC and cycle time of batch/fed-batch system. We suggest MSC-HCDC as a new production platform for various fermentation products including monoclonal antibody.     

Simultaneous saccharification and fermentation of cellulose: Effect of ethanol and cellulases on particular stages

The effects of ethanol and Trichoderma reesei cellulase on the saccharification and fermentation processes as well as the tolerance of the cellulase complex for ethanol have been investigated. The studies were conducted with respect to their usefulness in the process of simulataneous saccharification and fermentation of cellulose to ethanol. The following results were obtained. (1) Fermentative activity of Kluyveromyces fragilis yeasts was gradually depressed with increasing intial ethanol concentrations and temperature of fermentation between 35–46°C. (2) Crude cellulase preparation introduced to the culture broth to a final enzyme activity of 0.5 to 2.0 FPU/ml had not distinct effect on the biomass production, ethanol yield, and glucose uptake by yeasts in 48 h fermentation at 43°C. On the other hand, only a negligible decrease in the cellulase complex activity was observed during fermentation process. (3) Saccharification of wheat straw was inhibited by at least 1% w/v ethanol. (4) The enzymes of the cellulase system showed a high stability to exposure to ethanol for 48 h at 43°C.     

Improvement of ethanol production in very high gravity fermentation by horse gram (Dolichos biflorus) flour supplementation

AIMS: To determine the effect of osmotic stress on yeast and to investigate the protective role of horse gram flour during very high gravity (VHG) ethanol fermentation. METHODS AND RESULTS: Saccharomyces cerevisiae was inoculated into high sugar (30-40%, w/v) containing medium with and without supplementation of horse gram flour. The fermentation experiments were carried out in batch mode. The effect of 4 or 6% of horse gram flour to the medium on the metabolic behaviour and viability of yeast was studied. Significant increase in ethanol yield up to 50% and dramatic decrease in glycerol production up to 100% was observed in the presence of horse gram flour. The fermentation rate was increased from 3 to 5 days with increased viable cell count. The physical and chemical factors of horse gram flour may aid in reducing the osmotic stress of high gravity fermentation of ethanol as well as enhancing ethanol yield. CONCLUSIONS: It was found that horse gram flour not only reduced fermentation time but also enhanced ethanol production by better utilization of sugar. SIGNIFICANCE AND IMPACT OF THE STUDY: Production of high ethanol concentration by using VHG sugar fermentation eliminates the expensive steps in the conventional process and saves time.     

Production of fuel ethanol from bamboo by concentrated sulfuric acid hydrolysis followed by continuous ethanol fermentation

An efficient process for the production of fuel ethanol from bamboo that consisted of hydrolysis with concentrated sulfuric acid, removal of color compounds, separation of acid and sugar, hydrolysis of oligosaccharides and subsequent continuous ethanol fermentation was developed. The highest sugar recovery efficiency was 81.6% when concentrated sulfuric acid hydrolysis was carried out under the optimum conditions. Continuous separation of acid from the saccharified liquid after removal of color compounds with activated carbon was conducted using an improved simulated moving bed (ISMB) system, and 98.4% of sugar and 90.5% of acid were recovered. After oligosaccharide hydrolysis and pH adjustment, the unsterilized saccharified liquid was subjected to continuous ethanol fermentation using Saccharomycescerevisiae strain KF-7. The ethanol concentration, the fermentation yield based on glucose and the ethanol productivity were approximately 27.2 g/l, 92.0% and 8.2 g/l/h, respectively. These results suggest that the process is effective for production of fuel ethanol from bamboo.     

Very high gravity (VHG) ethanolic brewing and fermentation: a research update

There have been numerous developments in ethanol fermentation technology since the beginning of the new millennium as ethanol has become an immediate viable alternative to fast-depleting crude reserves as well as increasing concerns over environmental pollution. Nowadays, although most research efforts are focused on the conversion of cheap cellulosic substrates to ethanol, methods that are cost-competitive with gasoline production are still lacking. At the same time, the ethanol industry has engaged in implementing potential energy-saving, productivity and efficiency-maximizing technologies in existing production methods to become more viable. Very high gravity (VHG) fermentation is an emerging, versatile one among such technologies offering great savings in process water and energy requirements through fermentation of higher concentrations of sugar substrate and, therefore, increased final ethanol concentration in the medium. The technology also allows increased fermentation efficiency, without major alterations to existing facilities, by efficient utilization of fermentor space and elimination of known losses. This comprehensive research update on VHG technology is presented in two main sections, namely VHG brewing, wherein the effects of nutrients supplementation, yeast pitching rate, flavour compound synthesis and foam stability under increased wort gravities are discussed; and VHG bioethanol fermentation studies. In the latter section, aspects related to the role of osmoprotectants and nutrients in yeast stress reduction, substrates utilized/tested so far, including saccharide (glucose, sucrose, molasses, etc.) and starchy materials (wheat, corn, barley, oats, etc.), and mash viscosity issues in VHG bioethanol production are detailed. Thereafter, topics common to both areas such as process optimization studies, mutants and gene level studies, immobilized yeast applications, temperature effect, reserve carbohydrates profile in yeast, and economic aspects are discussed and future prospects are summarized.     

Grain pearling and very high gravity (VHG) fermentation technologies for fuel alcohol production from rye and triticale

A SATAKE laboratory abrasive mill was used for rye and triticale grain processing. About 12% of dry grain mass was removed after three and five successive abrasions for triticale and rye, respectively. Starch contents in the pearled grain were increased by 8·0% for triticale, and by 7·1% for rye. The pearled rye and triticale were ground and fermented by active dry yeast for fuel alcohol production by very high gravity (VHG) fermentation at 20°C. VHG technology was applied to increase final ethanol concentrations in the fermentors from 9·5–10·0% (v/v) (normal gravity) to 12·9–15·1% (v/v). The grain pearling process coupled with VHG technology further raised the ethanol concentration to 15·7–16·1% (v/v). Partial removal of outer grain solids in an alcohol plant would improve plant efficiency and decrease energy requirements for mash heating, mash cooling, and ethanol distillation.     

Combined use of three methods for high concentration ethanol production by Saccharomyces cerevisiae

Summary Ethanol concentration and fermentation productivity using Saccharomyces cerevisiae were substantially increased in shake flask cultures with a normal inoculum by combining 3 methods: (a) by making nutrient additions to the standard medium for ethanol production, (b) by immobilizing the cells in alginate beads and (c) by using a glucose step-feeding batch process. Ethanol concentration by free yeast was improved from 5.9% (w/w) to 9.6% (w/w) when a further 0.8% yeast extract and 1% animal peptone were added to the standard 30% (w/v) glucose nutrient medium. This was further increased to 12.8% (w/w) by using alginate immobilized yeast. The ethanol concentration was increased again, to 15.0% (w/w) by using the glucose step-feeding batch process.     

Simultaneous fermentation and isomerization of xylose

Summary Ethanol was produced from xylose by converting the sugar to xylulose, using commercial xylose isomerases, and simultaneously converting the xylulose to ethanol by anaerobic fermentation using different yeast strains. The process was optimized with the yeast strain Schizosaccharomyces pombe (Y-164). The data show that the simultaneous fermentation and isomerization of 6% xylose can produce final ethanol concentrations of 2.1% w/v within 2 days at temperatures as high as 39°C.Nomenclature SFIX simultaneous fermentation and isomerization of xylose - V _p volumetric production (g ethanol·l^-1 per hour) - Q _p specific rate (g ethanol·g^-1 cells per hour) - Y _s yield from substrate consumed (g ethanol, g^-1 xylose) - ET ethanol concentration (% wt/vol) - XT xylitol concentration (% wt/vol) - Glu glucose - Xyl xylose - --m maximum - --f final     

Production of multiple extracellular enzyme activities by novel submerged culture of <Emphasis Type="Italic">Aspergillus kawachii</Emphasis> for ethanol production from raw cassava flour

Cassava is a starch-containing root crop that is widely used as a raw material in a variety of industrial applications, most recently in the production of fuel ethanol. In the present study, ethanol production from raw (uncooked) cassava flour by simultaneous saccharification and fermentation (SSF) using a preparation consisting of multiple enzyme activities from Aspergillus kawachii FS005 was investigated. The multi-activity preparation was obtained from a novel submerged fermentation broth of A. kawachii FS005 grown on unmilled crude barley as a carbon source. The preparation was found to consist of glucoamylase, acid-stable α-amylase, acid carboxypeptidase, acid protease, cellulase and xylanase activities, and exhibited glucose and free amino nitrogen (FAN) production rates of 37.7 and 118.7 mg/l/h, respectively, during A. kawachii FS005-mediated saccharification of uncooked raw cassava flour. Ethanol production from 18.2% (w/v) dry uncooked solids of raw cassava flour by SSF with the multi-activity enzyme preparation yielded 9.0% (v/v) of ethanol and 92.3% fermentation efficiency. A feasibility study for ethanol production by SSF with a two-step mash using raw cassava flour and the multi-activity enzyme preparation manufactured on-site was verified on a pilot plant scale. The enzyme preparation obtained from the A. kawachii FS005 culture broth exhibited glucose and FAN production rates of 41.1 and 135.5 mg/l/h, respectively. SSF performed in a mash volume of about 1,612 l containing 20.6% (w/v) dry raw cassava solids and 106 l of on-site manufactured A. kawachii FS005 culture broth yielded 10.3% (v/v) ethanol and a fermentation efficiency of 92.7%.     

Ageing vessel design and optimization for continuous very-high-gravity ethanol fermentation processes

A continuous very-high-gravity (VHG) ethanol fermentation process design, consisting of a chemostat vessel connected to several equal-sized ageing vessels configured in parallel, was developed. The objective of the developed process is to have complete glucose utilization during fermentation stage. The process design integrates the conservation of mass principle and the experimental data of collected residual glucose profiles measured under VHG conditions. An ageing vessel involves three consecutive time periods: filling, ageing and operating. The ageing time is biological relevance, and is affected by the initial glucose concentration, the ethanol concentration, and the yeast viability in an ageing vessel. The operating time period is adjustable; a short operating time means a high discharge rate in order to empty an ageing vessel. The filling time links to the selection of the number of equal-sized ageing vessels that are installed downstream to a chemostat device. The developed process features the use of equal sized fermenters for all chemostat and ageing vessels so that the vessel exchangeability and the flexibility of fermentation operation are increased.     

Ethanol production in a continuous fermentation/membrane pervaporation system

The productivity of ethanol fermentation processes, predominantly based on batch operation in the U.S. fuel ethanol industry, could be improved by adoption of continuous processing technology. In this study, a conventional yeast fermentation was coupled to a flat-plate membrane pervaporation unit to recover continuously an enriched ethanol stream from the fermentation broth. The process employed a concentrated dextrose feed stream controlled by the flow rate of permeate from the pervaporation unit via liquid-level control in the fermentor. The pervaporation module contained 0.1 m² commercially available polydimethylsiloxane membrane and consistently produced a permeate of 20%–23% (w/w) ethanol while maintaining a level of 4%–6% ethanol in a stirred-tank fermentor. The system exhibited excellent operational stability. During continuous operation with cell densities of 15–23 g/l, ethanol productivities of 4.9–7.8 gl^–1 h^–1 were achieved utilizing feed streams of 269–619 g/l glucose. Pervaporation flux and ethanol selectivities were 0.31–0.79 lm^–2 h^–1 and 1.8–6.5 respectively.