Continuous hydrolysis of 4-cyanopyridine by nitrilases from <Emphasis Type="Italic">Fusarium solani</Emphasis> O1 and <Emphasis Type="Italic">Aspergillus niger</Emphasis> K10

The operational stabilities of nitrilases from Aspergillus niger K10 and Fusarium solani O1 were examined with 4-cyanopyridine as the substrate in continuous-stirred membrane reactors (CSMRs). The former enzyme was fairly stable at 30 °C with a deactivation constant (k _d) and enzyme half-life of 0.014 h⁻¹ and 50 h, respectively, but the latter exhibited an even higher stability characterized by k _d = 0.008 h⁻¹ and half-life of 87 h at 40 °C. Another advantage of this enzyme was its high chemoselectivity, i.e., selective transformation of nitriles into carboxylic acids, while the amide formed a high ratio of A. niger K10 nitrilase product. High conversion rates (>90%) were maintained for about 52 h using the nitrilase from F. solani O1 immobilized in cross-linked enzyme aggregates (CLEAs). The purity of isonicotinic acid was increased from 98% to >99.9% by using two CSMRs connected in series, the first one containing the F. solani O1 nitrilase and the second the amidase from Rhodococcus erythropolis A4 (both enzymes as CLEAs), the amidase hydrolyzing the by-product isonicotinamide.     

An improved nitrilase-mediated bioprocess for synthesis of nicotinic acid from 3-cyanopyridine with hyperinduced <Emphasis Type="Italic">Nocardia globerula</Emphasis> NHB-2

Nitrilase of Nocardia globerula NHB-2 was induced by short-chain aliphatic nitriles (valeronitrile > isobutyronitrile > butyronitrile > propionitrile) and exhibited activity towards aromatic nitriles (benzonitrile > 3-cyanopyridine > 4-cyanopyridine > m-tolunitrile > p-tolunitrile). Hyperinduction of nitrilase (6.67 U mg_DCW⁻¹, 18.7 U mL⁻¹) was achieved in short incubation time (30 h, 30°C) through multiple feeding of isobutyronitrile in the growth medium. The nitrilase of this organism exhibits both substrate and product inhibition effects. In a fed batch reaction at 1 L scale using hyperinduced resting cells corresponding to 10 U mL⁻¹ nitrilase activity (1.5 mg_DCW mL⁻¹), a total of 123.11 g nicotinic acid was produced at a rate of 24 g h⁻¹ g_DCW⁻¹.     

A Gram-negative bacterium producing a heat-stable nitrilase highly active on aliphatic dinitriles

A Gram-negative bacterial strain, identified as Acidovorax facilis strain 72W, has been isolated from soil by enrichment using 2-ethylsuccinonitrile as the sole nitrogen source. This strain grows on a variety of aliphatic mono- and dinitriles. Experiments using various heating regimes indicate that nitrile hydratase, amidase and nitrilase activities are present. The nitrilase is efficient at hydrolyzing aliphatic dinitriles to cyanoacid intermediates. It has a strong bias for C₃–C₆ dinitriles over mononitriles of the same chain length. Whole, resting cell hydrolysis of 2-methylglutaronitrile results in 4-cyanopentanoic acid and 2-methylglutaric acid as the major products. Heating, at least 20 min at 50 °C, eliminates nitrile hydratase and amidase activities, resulting in greater than 97% selectivity to 4-cyanopentanoic acid. The nitrilase activity has good heat stability, showing a half-life of 22.7 h at 50 °C and a temperature optimum of at least 65 °C for activity. The strain has been deposited as ATCC 55746. Received: 26 January 1999 / Received revision: 10 June 1999 / Accepted: 27 June 1999     

Continuous cultures of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> mt-2 overcome catabolic function loss under real case operating conditions

The long-term performance and stability of Pseudomonas putida mt-2 cultures, a toluene-sensitive strain harboring the genes responsible for toluene biodegradation in the archetypal plasmid pWW0, was investigated in a chemostat bioreactor functioning under real case operating conditions. The process was operated at a dilution rate of 0.1 h⁻¹ under toluene loading rates of 259 ± 23 and 801 ± 78 g m⁻³ h⁻¹ (inlet toluene concentrations of 3.5 and 10.9 g m⁻³, respectively). Despite the deleterious effects of toluene and its degradation intermediates, the phenotype of this sensitive P. putida culture rapidly recovered from a 95% Tol⁻ population at day 4 to approx. 100% Tol⁺ cells from day 13 onward, sustaining elimination capacities of 232 ± 10 g m⁻³ h⁻¹ at 3.5 g Tol m⁻³ and 377 ± 13 g m⁻³ h⁻¹ at 10.9 g Tol m⁻³, which were comparable to those achieved by highly tolerant strains such as P. putida DOT T1E and P. putida F1 under identical experimental conditions. Only one type of Tol⁻ variant, harboring a TOL-like plasmid with a 38.5 kb deletion (containing the upper and meta operons for toluene biodegradation), was identified.     

Conversion of aliphatic nitriles by the arylacetonitrilase from <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> EBC191

The conversion of aliphatic nitriles by the arylacetonitrilase from Pseudomonas fluorescens EBC191 (NitA) was analyzed. The nitrilase hydrolysed a wide range of aliphatic mono- and dinitriles and showed a preference for unsaturated aliphatic substrates containing 5–6 carbon atoms. In addition, increased reaction rates were also found for aliphatic nitriles carrying electron withdrawing substituents (e.g. chloro- or hydroxy-groups) close to the nitrile group. Aliphatic dinitriles were attacked only at one of the nitrile groups and with most of the tested dinitriles the monocarboxylates were detected as major products. In contrast, fumarodinitrile was converted to the monocarboxylate and the monocarboxamide in a ratio of about 65:35. Significantly different relative amounts of the two products were observed with two nitrilase variants with altered reaction specifities. NitA converted some aliphatic substrates with higher rates than 2-phenylpropionitrile, which is one of the standard substrates for arylacetonitrilases. This indicated that the traditional classification of nitrilases as “arylacetonitrilases”, “aromatic” or “aliphatic” nitrilases might require some corrections. This was also suggested by the construction of some variants of NitA which were modified in an amino acid residue which was previously suggested to be essential for the conversion of aliphatic substrates by a homologous nitrilase.     

Degradation of ethylbenzene by free and immobilized <Emphasis Type="Italic">Pseudomonas</Emphasis><Emphasis Type="Italic">fluorescens-</Emphasis>CS2

Pseudomonas fluorescens-CS2 metabolized ethylbenzene as the sole source of carbon and energy. The involvement of catechol as the hydroxylated intermediate during the biodegradation of ethylbenzene was established by TLC, HPLC and enzyme analysis. The specific activity of Catechol 2,3-dioxygenase in the cell free extracts of P. fluorescens-CS2 was determined to be 0.428 μmoles min⁻¹ mg⁻¹ protein. An aqueous-organic, Two-Phase Batch Culture System (TPBCS) was developed to overcome inhibition due to higher substrate concentrations. In TPBCS, P. fluorescens-CS2 demonstrated ethylbenzene utilization up to 50 mM without substrate inhibition on inclusion of n-decanol as the second phase. The rate of ethylbenzene metabolism in TPBCS was found enhance by fivefold in comparison with single phase system. Alternatively the alginate, agar and polyacrylamide matrix immobilized P. fluorescens-CS2 cells efficiently degraded ethylebenzene with enhanced efficiency compared to free cell cultures in single and two-phase systems. The cells entrapped in ployacrylamide and alginate were found to be stable and degradation efficient for a period of 42 days where as agar-entrapped P. fluorescens was stable and efficient a period of 36 days. This demonstrates that alginate and polyacrylamide matrices are more promising as compared to agar for cell immobilization.     

A novel cold-adapted lipase from <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. XMZ-26: gene cloning and characterisation

Acinetobacter sp. XMZ-26 (ACCC 05422) was isolated from soil samples obtained from glaciers in Xinjiang Province, China. The partial nucleotide sequence of a lipase gene was obtained by touchdown PCR using degenerate primers designed based on the conserved domains of cold-adapted lipases. Subsequently, a complete gene sequence encoding a 317 amino acid polypeptide was identified. Our novel lipase gene, lipA, was overexpressed in Escherichia coli. The recombinant protein (LipA) was purified by Ni-affinity chromatography, and then deeply characterised. The LipA resulted to hydrolyse pNP esters of fatty acids with acyl chain length from C2 to C16, and the preferred substrate was pNP octanoate showing a k _cat = 560.52 ± 28.32 s⁻¹, K _m = 0.075 ± 0.008 mM, and a k _cat/K _m = 7,377.29 ± 118.88 s⁻¹ mM⁻¹. Maximal LipA activity was observed at a temperature of 15°C and pH 10.0 using pNP decanoate as substrate. That LipA peaked at such a low temperature and remained most activity between 5°C and 35°C indicated that it was a cold-adapted enzyme. Remarkably, this lipase retained much of its activity in the presence of commercial detergents and organic solvents, including Ninol, Triton X-100, methanol, PEG-600, and DMSO. This cold-adapted lipase may find applications in the detergent industry and organic synthesis.     

Cloning and characterization of a thermostable and halo-tolerant endoglucanase from <Emphasis Type="Italic">Thermoanaerobacter tengcongensis</Emphasis> MB4

A β-1,4-endoglucanase (Cel5A) was cloned from the genomic DNA of saccharolytic thermophilic eubacterium Thermoanaerobacter tengcongensis MB4 and functionally expressed in Escherichia coli. Substrate specificity analysis revealed that Cel5A cleaves specifically the β-1,4-glycosidic linkage in cellulose with high activity (294 U mg⁻¹; carboxymethyl cellulose sodium (CMC)). On CMC, kinetics of Cel5A was determined (K _m 1.39 ± 0.12 g l⁻¹; k _cat/K _m 1.41 ± 0.13 g⁻¹ s⁻¹). Cel5A displays an activity optimum between 75 and 80 °C. Residues Glu187 and Glu289 were identified as key catalytic amino acids by sequence alignment. Interestingly, derived from a non-halophilic bacterium, Cel5A exhibits high residual activities in molar concentration of NaCl (3 M, 49.3%) and KCl (4 M, 48.6%). In 1 M NaCl, 82% of Cel5A activity is retained after 24 h incubation. Molecular Dynamics studies performed at 0 and 3 M NaCl, correlate the Cel5A stability to the formation of R-COO⁻···Na⁺ ···⁻OOC-R salt bridges within the Cel5A tertiary structure, while activity possibly relates to the number of Na⁺ ions trapped into the negatively charged active site, involving a competition mechanism between substrate and Na⁺. Additionally, Cel5A is remarkably resistant in ionic liquids 1-butyl-3-methyllimidazolium chloride (1 M, 54.4%) and 1-allyl-3-methylimidazolium chloride (1 M, 65.1%) which are promising solvents for cellulose degradation and making Cel5A an attractive candidate for industrial applications.     

Simultaneous nutrients and carbon removal during pretreated swine slurry degradation in a tubular biofilm photobioreactor

The biodegradation potential of an innovative enclosed tubular biofilm photobioreactor inoculated with a Chlorella sorokiniana strain and an acclimated activated sludge consortium was evaluated under continuous illumination and increasing pretreated (centrifuged) swine slurry loading rates. This photobioreactor configuration provided simultaneous and efficient carbon, nitrogen, and phosphorous treatment in a single-stage process at sustained nitrogen and phosphorous removals efficiencies ranging from 94% to 100% and 70–90%, respectively. Maximum total organic carbon (TOC), NH₄ ⁺, and PO₄ ³⁻ removal rates of 80 ± 5 g C m_r ⁻³ day⁻¹, 89 ± 5 g N m_r ⁻³ day⁻¹, and 13 ± 3 g P m_r ⁻³ day⁻¹, respectively, were recorded at the highest swine slurry loadings (TOC of 1,247 ± 62 mg L⁻¹, N–NH₄ ⁺ of 656 ± 37 mg L⁻¹, P–PO₄ ³⁺ of 117 ± 19 mg L⁻¹, and 7 days of hydraulic retention time). The unusual substrates diffusional pathways established within the phototrophic biofilm (photosynthetic O₂ and TOC/NH₄ ⁺ diffusing from opposite sides of the biofilm) allowed both the occurrence of a simultaneous denitrification/nitrification process at the highest swine slurry loading rate and the protection of microalgae from any potential inhibitory effect mediated by the combination of high pH and high NH₃ concentrations. In addition, this biofilm-based photobioreactor supported efficient biomass retention (>92% of the biomass generated during the pretreated swine slurry biodegradation).     

Kinetics of CO conversion into H<Subscript>2</Subscript> by <Emphasis Type="Italic">Carboxydothermus hydrogenoformans</Emphasis>

The objective of this study was to improve the biological water–gas shift reaction for producing hydrogen (H₂) by conversion of carbon monoxide (CO) using an anaerobic thermophilic pure strain, Carboxydothermus hydrogenoformans. Specific hydrogen production rates and yields were investigated at initial biomass densities varying from 5 to 20 mg volatile suspended solid (VSS) L⁻¹. Results showed that the gas–liquid mass transfer limits the CO conversion rate at high biomass concentrations. At 100-rpm agitation and at CO partial pressure of 1 atm, the optimal substrate/biomass ratio must exceed 5 mol CO g⁻¹ biomass VSS in order to avoid gas–liquid substrate transfer limitation. An average H₂ yield of 94 ± 3% and a specific hydrogen production rate of ca. 3 mol g⁻¹ VSS day⁻¹ were obtained at initial biomass densities between 5 and 8 mg VSS⁻¹. In addition, CO bioconversion kinetics was assessed at CO partial pressure from 0.16 to 2 atm, corresponding to a dissolved CO concentration at 70°C from 0.09 to 1.1 mM. Specific bioactivity was maximal at 3.5 mol CO g⁻¹ VSS day⁻¹ for a dissolved CO concentration of 0.55 mM in the culture. This optimal concentration is higher than with most other hydrogenogenic carboxydotrophic species.     

Comparative analysis of four <Emphasis Type="Italic">β</Emphasis>-galactosidases from <Emphasis Type="Italic">Bifidobacterium bifidum</Emphasis> NCIMB41171: purification and biochemical characterisation

Four different β-galactosidases (previously named BbgI, BbgII, BbgIII and BbgIV) from Bifidobacterium bifidum NCIMB41171 were overexpressed in Escherichia coli, purified to homogeneity and their biochemical properties and substrate preferences comparatively analysed. BbgI was forming a hexameric protein complex of 875 kDa, whereas BbgII, BbgIII and BbgIV were dimers with native molecular masses of 178, 351 and 248 kDa, respectively. BbgII was the only enzyme that preferred acidic conditions for optimal activity (pH 5.4–5.8), whereas the other three exhibited optima in more neutral pH ranges (pH 6.4–6.8). Na⁺ and/or K⁺ ions were prerequisite for BbgI and BbgIV activity in Bis–Tris-buffered solutions, whereas Mg⁺⁺ was strongly activating them in phosphate-buffered solutions. BbgII and BbgIII were slightly influenced from the presence or absence of cations, with Mg⁺⁺, Mn⁺⁺ and Ca⁺⁺ ions exerting the most positive effect. Determination of the specificity constants (k _cat/K _m) clearly indicated that BbgI (6.11 × 10⁴ s⁻¹ M⁻¹), BbgIII (2.36 × 10⁴ s⁻¹ M⁻¹) and especially BbgIV (4.01 × 10⁵ s⁻¹ M⁻¹) are highly specialised in the hydrolysis of lactose, whereas BbgII is more specific for β-d-(1→6) galactobiose (5.59 × 10⁴ s⁻¹ M⁻¹) than lactose (1.48 × 10³ s⁻¹ M⁻¹). Activity measurements towards other substrates (e.g. β-d-(1→6) galactobiose, β-d-(1→4) galactobiose, β-d-(1→4) galactosyllactose, N-acetyllactosamine, etc.) indicated that the β-galactosidases were complementary to each other by hydrolysing different substrates and thus contributing in a different way to the bacterial physiology.     

Heterologous expression of polyhydroxyalkanoate depolymerase from <Emphasis Type="Italic">Thermobifida</Emphasis> sp. in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and catalytic analysis by surface plasmon resonance

A polyhydroxyalkanote depolymerase gene from Thermobifida sp. isolate BCC23166 was cloned and expressed as a C-terminal His₆-tagged fusion in Pichia pastoris. Primary structure analysis revealed that the enzyme PhaZ-Th is a member of a proposed new subgroup of SCL-PHA depolymerase containing a proline–serine repeat linker. PhaZ-Th was expressed as two glycosylated forms with apparent molecular weights of 61 and 70 kDa, respectively. The enzyme showed esterase activity toward p-nitrophenyl alkanotes with V _max and K _m of 3.63 ± 0.16 μmol min⁻¹ mg⁻¹ and 0.79 ± 0.12 mM, respectively, on p-nitrophenyl butyrate with optimal activity at 50–55°C and pH 7–8. Surface plasmon resonance (SPR) analysis demonstrated that PhaZ-Th catalyzed the degradation of poly-[(R)-3-hydroxybutyrate] (PHB) films, which was accelerated in (R)-3-hydroxyvalerate copolymers with a maximum degradation rate of 882 ng cm⁻² h⁻¹ for poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] (12 mol% V). Surface deterioration, especially on the amorphous regions of PHB films was observed after exposure to PhaZ-Th by atomic force microscopy. The use of P. pastoris as an alternative recombinant system for bioplastic degrading enzymes in secreted form and a sensitive SPR analytical technique will be of utility for further study of bioplastic degradation.     

Growth and carrageenan quality of <Emphasis Type="Italic">Kappaphycus striatum</Emphasis> var. <Emphasis Type="Italic">sacol</Emphasis> grown at different stocking densities,duration of culture and depth

Kappaphycus striatum var. sacol was grown in two separate studies: (1) at two stocking densities, and (2) at four different depths, each for three different durations of culture (30, 45 and 60 days) in order to determine the growth rate of the seaweed and evaluate the carrageenan content and its molecular weight. The results demonstrated that stocking density, duration of culture and depth significantly (P < 0.01) affected the growth rate, carrageenan content and molecular weight of K. striatum var. sacol. Decreasing growth rate was observed at both stocking densities and at four depths as duration of culture increased. A lower stocking density (500 g m⁻¹line⁻¹) showed a higher growth rate for the shortest durations, i.e. 30 days, as compared to those grown at a higher density. Likewise, decreasing growth rate was observed as depth increased, except at 50 cm after 60 days of culture. A 45-day culture period produced the highest molecular weight at both stocking densities (500 g m⁻¹line⁻¹ = 1,079.5 ± 31.8 kDa, 1,000 g m⁻¹line⁻¹ = 1,167 ± 270.6 kDa). ‘Sacol’ grown for 30 days at 50 cm (1,178 kDa) to 100 cm (1,200 kDa) depth showed the highest values of molecular weight of carrageenan extracted. The results suggested that K. striatum var. sacol is best grown at a stocking density of 500 g m⁻¹line⁻¹, at a depth of 50–100 cm, and for a duration of 30 days in order to provide the highest growth rate, carrageenan content and molecular weight.     

Cloning and biochemical properties of a highly thermostable and enantioselective nitrilase from Alcaligenes sp. ECU0401 and its potential for (R)-(?)-mandelic acid production

A nitrilase gene from Alcaligenes sp. ECU0401 was cloned and overexpressed in Escherichia coli BL21 (DE3) in a soluble form. The encoded protein with a His₆-tag was purified to nearly homogeneity as revealed by SDS-PAGE with a molecular weight of approximately 38.5 kDa, and the holoenzyme was estimated to be composed of 10 subunits of identical size by size exclusion chromatography. The V _max and K _m parameters were determined to be 27.9 μmol min⁻¹ mg⁻¹ protein and 21.8 mM, respectively, with mandelonitrile as the substrate. The purified enzyme was highly thermostable with a half life of 155 h at 30 °C and 94 h at 40 °C. Racemic mandelonitrile (50 mM) could be enantioselectively hydrolyzed to (R)-(−)-mandelic acid by the purified nitrilase with an enantiomeric excess of 97%. The extreme stability, high activity and enantioselectivity of this nitrilase provide a solid base for its practical application in the production of (R)-(−)-mandelic acid.     

Fed-batch production of unsaturated medium-chain-length polyhydroxyalkanoates with controlled composition by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

Unsaturated medium-chain-length polyhydroxyalkanoates (MCL-PHA) were produced at a productivity of 0.63–1.09 g PHA l⁻¹ h⁻¹ with final PHA content ranging from 42.6 to 55.8% in single-stage, carbon-limited, fed-batch fermentations of Pseudomonas putida KT2440. A mixture of nonanoic acid (NA) and 10-undecenoic acid (UDA⁼) was fed exponentially to control growth rate. Varying the specific growth rate (0.14 h⁻¹ vs. 0.23 h⁻¹) at similar substrate feed ratios (NA:UDA⁼ = 5:1) had little effect on the final PHA content and relative composition. However, decreasing the NA:UDA⁼ ratio decreased the final amount of PHA produced from 56% with NA:UDA⁼ = 5.07:1 to only 42% at NA:UDA⁼ = 2.47:1. The molar fraction of all 3-hydroxyalkanoate monomers in the PHA product was relatively constant throughout each fermentation, indicating that the final product was homogeneous rather than a mixture of different copolymers. A linear relationship between unsaturation of the PHA produced and unsaturation of the carbon feed was found, which demonstrates the feasibility of producing unsaturated MCL-PHAs with controlled polymeric composition in a fed-batch process.     

Kinetics of styrene biodegradation by <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. E-93486

The research into kinetics of styrene biodegradation by bacterial strain Pseudomonas sp. E-93486 coming from VTT Culture Collection (Finland) was presented in this work. Microbial growth tests in the presence of styrene as the sole carbon and energy source were performed both in batch and continuous cultures. Batch experiments were conducted for initial concentration of styrene in the liquid phase changed in the range of 5–90 g m⁻³. The Haldane model was found to be the best to fit the kinetic data, and the estimated constants of the equation were: μ _m = 0.1188 h⁻¹, K _S = 5.984 mg l⁻¹, and K _i = 156.6 mg l⁻¹. The yield coefficient mean value Y_\textxs^\textapp Y_{\text{xs}}^{\text{app}} for the batch culture was 0.72 g_{dry cells weight} (g_substrate)⁻¹. The experiments conducted in a chemostat at various dilution rates (D = 0.035–0.1 h⁻¹) made it possible to determine the value of the coefficient for maintenance metabolism m _d = 0.0165 h⁻¹ and the maximum yield coefficient value Y_\textxs^\textM = 0.913 Y_{\text{xs}}^{\text{M}} = 0.913 . Chemostat experiments confirmed the high value of yield coefficient Y_\textxs^\textapp Y_{\text{xs}}^{\text{app}} observed in the batch culture. The conducted experiments showed high activity of the examined strain in the styrene biodegradation process and a relatively low sensitivity to inhibition of its growth at higher concentrations of styrene in the solution. Such exceptional features of Pseudomonas sp. E-93486 make this bacterial strain the perfect candidate for technical applications.     

Influence of initial cellulose concentration on the carbon flow distribution during batch fermentation by Clostridium thermocellum ATCC 27405

The objective of this research was to understand how carbon loading influences hydrogen (H₂) synthesis and metabolic flow patterns in the thermophilic, cellulolytic bacterium, Clostridium thermocellum. C. thermocellum was cultivated in batch cultures with high (5 g L⁻¹) and low (1 g L⁻¹) initial concentrations of α-cellulose at 60°C. The growth rate of C. thermocellum was 22% lower (0.15 h⁻¹) in cultures with low-cellulose concentration compared with cultures with high-cellulose concentrations. Although substrate depletion coincided with the end of log-growth in low-cellulose cultures, the prime reason for growth arrest in high-cellulose cultures was not identified. Ethanol, acetate, and formate were the major soluble end-products with concomitant release of H₂ and CO₂ under both conditions. Lactate appeared during the late log phase in high-carbon cultures when pH dropped below 6.4 and became the major end-product in stationary phase. During the exponential phase of cell growth, significantly higher yields for H₂ and acetate (1.90 ± 0.14 and 1.11 ± 0.04 mol/mol glucose equivalent, respectively) were obtained from low-cellulose cultures compared to those from high-cellulose cultures. The maximum specific rate of H₂ production, 6.41 ± 0.13 mmol H₂/g dry cell/h, obtained during the exponential phase from low-carbon cultures was about 37% higher than that obtained from high-carbon cultures.     

Length-based growth,maturity and natural mortality of the cockfish <Emphasis Type="Italic">Callorhinchus callorhynchus</Emphasis> (Linnaeus, 1758) off Coquimbo,Chile

The growth rate, reproductive aspects, and natural mortality of chimaeras and ratfish are poorly known. In this study, life-history parameters for cockfish Callorhinchus callorhynchus (Holocephali—Callorhinchidae) are estimated, which is an important fish resource exploited in Chile. Specimens were sampled from the artisanal fishery captures, from November 2006 to November 2007. The standard length (SL) of males fluctuated between 20 and 62 cm, and between 21 and 70 cm for females. Von Bertalanffy growth parameters were estimated through length-frequency data analysis using MULTIFAN. The length-weight relationship and von Bertalanffy growth parameters were significantly different for males and females, as well as the length at 50% maturity. For males a model with 5 age-classes was the best, with asymptotic length L _∞ = 52 cm SL, growth coefficient K = 0.473 yr⁻¹, and age at length zero t ₀ = −0.690 yrs. For females the best model was represented by 10 age-classes (L _∞ = 70.3 cm SL, K = 0.193 yr⁻¹, t ₀ = −1.158 yrs) in the length-frequency data sets. Length at 50% maturity of males was estimated in 43.7 cm SL, and in 50.2 cm SL for females. The natural mortality rate fluctuated between 0.42 and 0.82 yr⁻¹ for males and between 0.12 and 0.37 yr⁻¹ for females, depending upon the method used. It is concluded that C. callorhynchus is a species with life-history parameters significantly different between males and females, and such differences should be taken into account in future population dynamics analysis.     

Biofiltering efficiency, uptake and assimilation rates of Ulva clathrata (Roth) J. Agardh (Clorophyceae) cultivated in shrimp aquaculture waste water

The growth, biofiltering efficiency and uptake rates of Ulva clathrata were studied in a series of outdoor tanks, receiving waste water directly from a shrimp (Litopenaeus vannamei) aquaculture pond, under constant aeration and two different water regimes: (1) continuous flow, with 1 volume exchange a day (VE day^-1) and (2) static regime, with 1 VE after 4 days. Water temperature, salinity, pH, dissolved inorganic nitrogen (DIN), phosphate (PO₄), chlorophyll-a (chl-a), total suspended solids (TSS), macroalgal biomass (fresh weight) and tissue nutrient assimilation were monitored over 12 days. Ulva clathrata was highly efficient in removing the main inorganic nutrients from effluent water, stripping 70–82% of the total ammonium nitrogen (TAN) and 50% PO₄ within 15 h. Reductions in control tanks were much lower (Tukey HSD, P < 0.05). After 3 days, the mean uptake rates by the seaweed biomass under continuous flow were 3.09 mg DIN g DW day⁻¹ (383 mg DIN m⁻² day⁻¹) and 0.13 mg PO₄ g DW day⁻¹ (99 mg PO₄ m⁻² day⁻¹), being significantly higher than in the static regime (Tukey HSD, P < 0.05). The chl-a decreased in seaweed tanks, suggesting that U. clathrata inhibited phytoplankton growth. Correlations between the cumulative values of DIN removed from the water and total nitrogen assimilated into the seaweed biomass (r = 0.7 and 0.8, P < 0.05), suggest that nutrient removal by U. clathrata dominated over other processes such as phytoplankton and bacterial assimilation, ammonia volatilization and nutrient precipitation.