Evidence that extracellular export of the endoglucanase encoded by egl of Pseudomonas solanacearum occurs by a two-step process involving a lipoprotein intermediate

Pseudomonas solanacearum is an important phytopathogen that produces a variety of extracellular enzymes. Previous reports suggested that one of these, a 43-kDa beta-1,4-endoglucanase (EGL), is initially synthesized with a 45-residue leader sequence that is removed during export. Experiments with globomycin presented here also suggest that the primary precursor of EGL (ppEGL) has a 45-residue leader sequence but that only the first 19 residues of the leader sequence are removed by signal peptidase II during initial export across the inner membrane. Further analysis suggested that the resultant 46-kDa intermediate precursor (pEGL) is a transient fatty acylated lipoprotein and is located on the periplasmic side of the inner membrane of P. solanacearum. Although Escherichia coli could synthesize ppEGL, modify it with palmitate, and remove the first 19 residues of the leader sequence during export across the inner membrane, only P. solanacearum could export pEGL across the outer membrane and remove the remaining 26 residues of the leader sequence producing the mature, extracellular EGL. The second step of the export process requires export machinery not present in E. coli. To our knowledge this represents the first example of a leader sequence with two distinct parts, one removed during export across the inner membrane and the other removed during export across the outer membrane.     

Role of the two-component leader sequence and mature amino acid sequences in extracellular export of endoglucanase EGL from Pseudomonas solanacearum.

The egl gene of Pseudomonas solanacearum encodes a 43-kDa extracellular endoglucanase (mEGL) involved in wilt disease caused by this phytopathogen. Egl is initially translated with a 45-residue, two-part leader sequence. The first 19 residues are apparently removed by signal peptidase II during export of Egl across the inner membrane (IM); the remaining residues of the leader sequence (modified with palmitate) are removed during export across the outer membrane (OM). Localization of Egl-PhoA fusion proteins showed that the first 26 residues of the Egl leader sequence are required and sufficient to direct lipid modification, processing, and export of Egl or PhoA across the IM but not the OM. Fusions of the complete 45-residue leader sequence or of the leader and increasing portions of mEgl sequences to PhoA did not cause its export across the OM. In-frame deletion of portions of mEGL-coding sequences blocked export of the truncated polypeptides across the OM without affecting export across the IM. These results indicate that the first part of the leader sequence functions independently to direct export of Egl across the IM while the second part and sequences and structures in mEGL are involved in export across the OM. Computer analysis of the mEgl amino acid sequence obtained from its nucleotide sequence identified a region of mEGL similar in amino acid sequence to regions in other prokaryotic endoglucanases.     

Analysis of the Pseudomonas solanacearum polygalacturonase encoded by pglA and its involvement in phytopathogenicity.

A major endopolygalacturonase excreted by Pseudomonas solanacearum was purified to greater than 95% homogeneity and shown to have an isoelectric point of 9.0 and a subunit molecular mass of 52 kilodaltons (kDa). The gene encoding this enzyme (pglA) was isolated from a genomic library of P. solanacearum DNA based on its expression in Escherichia coli and shown to be contained on a 1.8-kilobase DNA fragment. The identity of the pglA gene product and the 52-kDa polygalacturonase was demonstrated by immunoadsorption and isoelectric focusing experiments. The cloned pglA gene was apparently expressed from its own promoter in E. coli and its product was partially secreted into the periplasm. The pglA gene was insertionally inactivated in vitro and used to mutate the chromosomal pglA gene of P. solanacearum by marker exchange mutagenesis. The resulting mutant strain was deficient in production of the 52-kDa polygalacturonase and took twice as long to wilt and kill tomato plants as the wild-type parent in plant bioassay experiments. Complementation in trans with the wild-type cloned pglA gene restored virulence to near wild-type levels. The data indicate that the pglA gene is important, but not absolutely necessary, for pathogenesis.     

An artificial hydrophobic sequence functions as either an anchor or a signal sequence at only one of two positions within the Escherichia coli outer membrane protein OmpA

The 325-residue outer membrane protein, OmpA, of Escherichia coli, like most other outer membrane proteins with known sequence, contains no long stretch of hydrophobic amino acids. A synthetic oligonucleotide, encoding the sequence Leu-Ala-Leu-Val, was inserted four times between the codons for amino acid residues 153 and 154 and two, three, or four times between the codons for residues 228 and 229, resulting in the OmpA153-4, OmpA-228-2, -3, and -4 proteins, respectively. In the first case, the lipophilic sequence anchored the protein in the plasma membrane. In the OmpA228 proteins, 16 but not 12 or 8 lipophilic residues most likely also acted as an anchor. By removal of the NH2-terminal signal peptide, the function of the insert in OmpA153-4 was converted to that of a signal-anchor sequence. Possibly due to differences in amino acid sequences surrounding the insert, no signal function was observed with the insert in OmpA228-4. Production of the OmpA153-4 protein, with or without the NH2-terminal signal sequence, resulted in a block of export of chromosomally encoded OmpA. Clearly, long hydrophobic regions are not permitted within proteins destined for the bacterial outer membrane, and these proteins, therefore, have had to evolve another mechanism of membrane assembly.     

Genetic analysis of an MDR-like export system: the secretion of colicin V.

The extracellular secretion of the antibacterial toxin colicin V is mediated via a signal sequence independent process which requires the products of two linked genes: cvaA and cvaB. The nucleotide sequence of cvaB reveals that its product is a member of a subfamily of proteins, involved in the export of diverse molecules, found in both eukaryotes and prokaryotes. This group of proteins, here referred to as the 'MDR-like' subfamily, is characterized by the presence of a hydrophobic region followed by a highly conserved ATP binding fold. By constructing fusions between the structural gene for colicin V, cvaC, and a gene for alkaline phosphatase, phoA, lacking its signal sequence, it was determined that 39 codons in the N-terminus of cvaC contained the structural information to allow CvaC-PhoA fusion proteins to be efficiently translocated across the plasma membrane of Escherichia coli in a CvaA/CvaB dependent fashion. This result is consistent with the location of point mutations in the cvaC gene which yielded export deficient colicin V. The presence of the export signal at the N-terminus of CvaC contrasts with the observed C-terminal location of the export signal for hemolysin, which also utilizes an MDR-like protein for its secretion. It was also found that the CvaA component of the colicin V export system shows amino acid sequence similarities with another component involved in hemolysin export, HlyD. The role of the second component in these systems and the possibility that other members of the MDR-like subfamily will also have corresponding second components are discussed. A third component used in both colicin V and hemolysin extracellular secretion is the E. coli host outer membrane protein, TolC.     

The signal sequence of an Escherichia coli outer membrane protein can mediate translocation of a not normally secreted protein across the plasma membrane

The distal part of the long tail fibers of the Escherichia coli phage T4 consists of a dimer of protein 37. A fragment of the corresponding gene, encoding 253 amino acids, was inserted into several different sites within the cloned gene for the 325-residue outer membrane protein OmpA. In plasmid pTU T4-5 the fragment was inserted once and in pTU T4-10 tandemly twice between the codons for residues 153 and 154 of the OmpA protein. In pTU T4-22 two fragments were present, in tandem, between the codons for residues 45 and 46 of this protein. In pIN T4-6 one fragment was inserted into the ompA gene immediately following the part encoding the signal sequence. The corresponding mature proteins consist, in this order, of 605, 860, 835, and 279 amino acid residues. All precursor proteins were processed and translocated across the plasma membrane. Hence, not only can the OmpA protein serve as a vehicle for export of a nonsecretory protein, but the signal sequence alone can also mediate export of such a protein. Export of the pro-OmpA protein depends on the SecA protein. Export of the tail fiber fragment expressed from pIN T4-6 remained SecA dependent. Thus, the secA pathway in this case is chosen by the signal peptide. It is proposed that a signal peptide can mediate translocation of nonsecretory proteins as long as they are export-compatible. The inability of a signal sequence to mediate export of some proteins appears to be due to export incompatibility of the protein rather than to the absence of information, within the mature part of the polypeptide, which would be required for translocation.     

The fimA gene encoding the type-1 fimbrial subunit of Escherichia coli. Nucleotide sequence and primary structure of the protein

The nucleotide sequence was determined of a region of 1450 base pairs encompassing the fimA gene for the subunit of type 1 fimbriae of Escherichia coli as well as flanking regions containing potential regulator sequences. The 'translated' protein contains a 23-residue signal peptide; the processed fimbrial subunit consists of 158 amino acid residues yielding a relative molecular mass of 15706. The elucidated sequence shows significant homology with those of other E. coli fimbrial proteins.     

Gene fusions using the ompA gene coding for a major outer-membrane protein of Escherichia coli K12

It has been shown previously that fragments of the Escherichia coli major outer membrane protein OmpA lacking CO2H-terminal parts can be incorporated into this membrane in vivo [Bremer et al. (1982) Eur. J. Biochem. 122, 223-231]. The possibility that these fragments can be used, via gene fusions, as vehicles to transport other proteins to the outer membrane has been investigated. To test whether fragments of a certain size were optimal for this purpose a set of plasmids was prepared encoding 160, 193, 228, 274, and 280 NH2-terminal amino acids of the 325-residue OmpA protein. The 160-residue fragment was not assembled into the outer membrane whereas the others were all incorporated with equal efficiencies. Thus, if any kind of OmpA-associated stop transfer is required during export the corresponding signal might be present between residues 160 and 193 but not CO2H-terminal to 193. The ompA gene was fused to the gene (tet) specifying tetracycline resistance and the gene for the major antigen (vp1) of foot-and-mouth disease virus. In the former case a 584-residue chimeric protein is encoded consisting NH2-terminally of 228 OmpA residues followed by 356 CO2H-terminal residues of the 396-residue 'tetracycline resistance protein'. In the other case the same part of OmpA is followed by 250 CO2H-terminal residues of the 213-residue Vp1 plus 107 residues partly derived from another viral protein and from the vector. Full expression of both hybrids proved to be lethal. Lipophilic sequences bordered by basic residues, present in the non-OmpA parts of both hybrids were considered as candidates for the lethal effect. A plasmid was constructed which codes for 280 OmpA residues followed by a 31-residue tail containing the sequence: -Phe-Val-Ile-Met-Val-Ile-Ala-Val-Ser-Cys-Lys-. Expression of this hybrid gene was lethal but by changing the reading frame for the tail to encode another, 30-residue sequence the deleterious effect was abolished. It is possible that the sequence incriminated acts as a stop signal for transfer through the plasma membrane thereby jamming export sites for other proteins and causing lethality. If so, OmpA appears to cross the plasma membrane completely during export.     

The signal sequence suffices to direct export of outer membrane protein OmpA of Escherichia coli K-12.

We studied whether information required for export is present within the mature form of the Escherichia coli 325-residue outer membrane protein OmpA. We had previously analyzed overlapping internal deletions in the ompA gene, and the results allowed us to conclude that if such information exists it must be present repeatedly within the membrane part of the protein encompassing amino acid residues 1 to 177 (R. Freudl, H. Schwarz, M. Klose, N. R. Movva, and U. Henning, EMBO J. 4:3593-3598, 1985). A deletion which removed the codons for amino acid residues 1 to 229 of the OmpA protein was constructed. In this construct the signal sequence was fused to the periplasmic part of the protein. The resulting protein, designated Pro-OmpA delta 1-229, was processed, and the mature 95-residue protein accumulated in the periplasm. Hence, information required for export does not exist within the OmpA protein.     

On the role of the mature part of an Escherichia coli outer membrane protein (OmpA) in translocation across the plasma membrane

The 325-residue OmpA protein, which is synthesized as a precursor with a 21-residue signal sequence, is a polypeptide of the outer membrane of Escherichia coli K-12. The signal peptide is able to direct translocation across the plasma membrane of virtually any fragment of this protein. It had, therefore, been concluded that information required for this translocation does not exist within the mature part of the protein. This view has been criticized and it was suggested that our data showed that both the signal sequence and residues within the first 44 amino acid residues of the mature protein contributed to an optimal translocation mechanism. It is shown that, at least as far as is detectable, this is not so. The apparent rates of processing of various pro-OmpA constructs were measured. It was found that these rates did not depend on the presence of amino acid residues 4 through 45 but on the size of the polypeptides; the processing rate decreased with decreasing size. A possible explanation for this phenomenon is offered. While the results do not exclude the possibility that a defined area of the mature protein is involved in optimizing translocation, there is so far no evidence for it.     

Structure of LEP100, a glycoprotein that shuttles between lysosomes and the plasma membrane, deduced from the nucleotide sequence of the encoding cDNA

LEP100, a membrane glycoprotein that has the unique property of shuttling from lysosomes to endosomes to plasma membrane and back, was purified from chicken brain. Its NH2-terminal amino acid sequence was determined, and an oligonucleotide encoding part of this sequence was used to clone the encoding cDNA. The deduced amino acid sequence consists of 414 residues of which the NH2-terminal 18 constitute a signal peptide. The sequence includes 17 sites for N-glycosylation in the NH2-terminal 75% of the polypeptide chain followed by a region lacking N-linked oligosaccharides, a single possible membrane-spanning segment, and a cytoplasmic domain of 11 residues, including three potential phosphorylation sites. Eight cysteine residues are spaced in a regular pattern through the lumenal (extracellular) domain, while a 32-residue sequence rich in proline, serine, and threonine occurs at its midpoint. Expression of the cDNA in mouse L cells resulted in targeting of LEP100 primarily to the mouse lysosomes.     

The nature of information, required for export and sorting, present within the outer membrane protein OmpA of Escherichia coli K-12.

Information, in addition to that provided by signal sequences, for translocation across the plasma membrane is thought to be present in exported proteins of Escherichia coli. Such information must also exist for the localization of such proteins. To determine the nature of this information, overlapping inframe deletions have been constructed in the ompA gene which codes for a 325-residue major outer membrane protein. In addition, one deletion, encoding only the NH2-terminal part of the protein up to residue 160, was prepared. The location of each product was determined by immunoelectron microscopy. Proteins missing residues 4-45, 43-84, 46-227, 86-227 or 160-325 of the mature protein were all efficiently translocated across the plasma membrane. The first two proteins were found in the outer membrane, the others in the periplasmic space. It has been proposed that export and sorting signals consist of relatively small amino acid sequences near the NH2 terminus of an outer membrane protein. On the basis of sequence homologies it has also been suggested that such proteins possess a common sorting signal. The locations of the partially deleted proteins described here show that a unique export signal does not exist in the OmpA protein. The proposed common sorting signal spans residues 1-14 of OmpA. Since this region is not essential for routing the protein, the existence of a common sorting signal is doubtful. It is suggested that information both for export (if existent) and localization lies within protein conformation which for the former process should be present repeatedly in the polypeptide.     

Growth of genetically engineered Pseudomonas aeruginosa and Pseudomonas putida in soil and rhizosphere

The effect of the addition of a recombinant plasmid containing the pglA gene encoding an alpha-1,4-endopolygalacturonase from Pseudomonas solanacearum on the growth of Pseudomonas aeruginosa and Pseudomonas putida in soil and rhizosphere was determined. Despite a high level of polygalacturonase production by genetically engineered P. putida and P. aeruginosa, the results suggest that polygalacturonase production had little effect on the growth of these strains in soil or rhizosphere.     

Growth of genetically engineered Pseudomonas aeruginosa and Pseudomonas putida in soil and rhizosphere.

The effect of the addition of a recombinant plasmid containing the pglA gene encoding an alpha-1,4-endopolygalacturonase from Pseudomonas solanacearum on the growth of Pseudomonas aeruginosa and Pseudomonas putida in soil and rhizosphere was determined. Despite a high level of polygalacturonase production by genetically engineered P. putida and P. aeruginosa, the results suggest that polygalacturonase production had little effect on the growth of these strains in soil or rhizosphere.     

HrpI of Erwinia amylovora functions in secretion of harpin and is a member of a new protein family.

HrpI, a 78-kDa protein, functions in the secretion of harpin, a proteinaceous elicitor of the hypersensitive response from Erwinia amylovora. The predicted amino acid sequence of HrpI is remarkably similar to that of LcrD of Yersinia species, the first member of a recently described protein family. Other proteins of the family are MixA from Shigella flexneri, InvA from Salmonella typhimurium, FlhA from Caulobacter crescentus, HrpI from Pseudomonas syringae pv. syringae, HrpO from Pseudomonas solanacearum, and HrpC2 from Xanthomonas campestris pv. vesicatoria. Cells of E. amylovora containing mutated hrpI genes or cells of Escherichia coli containing the cloned hrp gene cluster with mutated hrpI produce but do not export harpin. When similar cells with functional hrpI genes were grown at 25 degrees C, but not at 37 degrees C, harpin was exported to the culture supernatant. Direct evidence that HrpI is involved in the secretion of a virulence protein has been offered. Two other loci of the hrp gene cluster are involved in the regulation of harpin, and four other loci also are involved in the secretion of harpin. Since harpin and other proteins likely to be secreted by the LcrD family of proteins lack typical signal peptides, their secretion mechanism is distinct from the general protein export pathway.     

Extensive sequence homology between IgA receptor and M proteins in Streptococcus pyogenes

Many strains of Streptococcus pyogenes are known to express a receptor for IgA. The complete nucleotide sequence of the gene for such a receptor, protein Arp4, has been determined. The deduced amino acid sequence of 386 residues includes a signal sequence of 41 amino acids and a putative membrane anchor region, both of which are homologous to similar regions in other streptococcal surface proteins. The processed form of the IgA receptor has a length of 345 amino acids and a calculated molecular weight of 39544. The N-terminal sequence of the processed form is different from that previously found for a similar IgA receptor isolated from a S. pyogenes strain of type M60. The sequence of protein Arp4 shows extensive homology to the C-terminal half of streptococcal M proteins, but not to the streptococcal IgG receptor protein G or staphlyococcal protein A. Apart from the membrane anchor, this homology includes a sequence of 119 amino acid residues containing three repeated units and a 54-residue sequence without repeats. The protein expressed in Escherichia coli is found in the periplasmic space, in which it constitutes the major protein. Protein Arp4 is the first example of a surface protein that has both immunoglobulin-binding capacity and structural features characteristic of M proteins.     

Nucleotide sequence of the gene encoding the F72 fimbrial subunit of a uropathogenic Escherichia coli strain

The cloned DNA fragment encoding the F72 fimbrial subunit from the uropathogenic Escherichia coli strain AD110 has been identified. The nucleotide sequence of the structural gene and of 196 bp of the noncoding region preceding the gene was determined. The structural gene codes for a polypeptide of 188 amino acid residues, including a 21-residue N-terminal signal sequence. The nucleotide sequence and the deduced amino acid sequence of the F72 gene were compared with the reported sequences of the papA gene (B?ga et al., 1984). Both genes code for subunits of fimbriae that are involved in mannose-resistant hemagglutination (MRHA) of human erythrocytes. The available data show that there is absolute homology between the noncoding regions preceding both genes over 129 bp. The two proteins are homologous at the N terminus and C terminus; there is less, but significant, homology in the region between the N and C termini.