Comparative life cycle assessment of autotrophic cultivation of Scenedesmus dimorphus in raceway pond coupled to biodiesel and biogas production

Life cycle assessment (LCA) of indigenous freshwater microalgae, Scenedesmus dimorphus, cultivation in open raceway pond and its conversion to biodiesel and biogas were carried out. The LCA inventory inputs for the biogas scenario was entirely based on primary data obtained from algal cultivation (in pilot scale raceway pond), harvesting, and biogas production; while only the downstream processing involved in biodiesel production namely drying, reaction and purification were based on secondary data. Overall, eight scenarios were modeled for the integrated process involving: algae-based CO₂ capture and downstream processing scenarios for biodiesel and biogas along with impact assessment of nutrient addition and extent of recycling in a life cycle perspective. The LCA results indicated a huge energy deficit and net CO₂ negative in terms of CO₂ capture for both the biodiesel and biogas scenarios, majorly due to lower algal biomass productivity and higher energy requirements for culture mixing. The sensitivity analysis indicated that variability in the biomass productivity has predominant effect on the primary energy demand and global warming potential (GWP, kg CO₂ eq.) followed by specific energy consumption for mixing algal culture. Furthermore, the LCA results indicated that biogas conversion route from microalgae was more energy efficient and sustainable than the biodiesel route. The overall findings of the study suggested that microalgae-mediated CO₂ capture and conversion to biodiesel and biogas production can be energy efficient at higher biomass productivity (> 10 g m⁻² day⁻¹) and via employing energy-efficient systems for culture mixing (< 2 W m⁻³).

     

Comparison of growth of Tetraselmis in a tubular photobioreactor (Biocoil) and a raceway pond

Microalgae cultivation systems can be divided broadly into open ponds and closed photobioreactors. This study investigated the growth and biomass productivity of the halophilic green alga Tetraselmis sp. MUR-233, grown outdoors in paddle wheel-driven open raceway ponds and in a tubular closed photobioreactor (Biocoil) at a salinity of 7 % NaCl (w/v) between mid-March and June 2010 (austral autumn/winter). Volumetric productivity in the Biocoil averaged 67 mg ash-free dry weight (AFDW) L^?1 day^?1 when the culture was grown without CO₂ addition. This productivity was 86 % greater, although less stable, than that achieved in the open raceway pond (36 mg L^?1 day^?1) grown at the same time in the autumn period. The Tetraselmis culture in the open raceway pond could be maintained in semi-continuous culture for the whole experimental period of 3 months without an additional CO₂ supply, whereas in the Biocoil, under the same conditions, reliable semi-continuous culture was only achievable for a period of 38 days. However, stable semi-continuous culture was achieved in the Biocoil by the addition of CO₂ at a controlled pH of ~7.5. With CO₂ addition, the volumetric biomass productivity in the Biocoil was 85 mg AFDW L^?1 day^?1 which was 5.5 times higher than the productivity achieved in the open raceway pond (15 mg AFDW L^?1 day^?1) with CO₂ addition and 8 times higher compared to the productivity in the open raceway pond without CO₂ addition (11 mg AFDW L^?1 day^?1), when cultures were grown in winter. The illuminated area productivities highlight an alternative story and showed that the open raceway pond had a three times higher productivity (3,000 mg AFDW m^?2 day^?1) compared to the Biocoil (850 mg AFDW m^?2 day^?1). Although significant differences were found between treatments and cultivation systems, the overall average lipid content for Tetraselmis sp. MUR-233 was 50 % in exponential phase during semi-continuous cultivation.     

Mass balance and life cycle assessment of biodiesel from microalgae incorporated with nutrient recycling options and technology uncertainties

This article presents mass balances and a detailed life cycle assessment (LCA) for energy and greenhouse gases (GHGs) of a simulated microalgae biodiesel production system. Key parameters of the system include biomass productivity of 16 and 25 g m^?2 day^?1 and lipid content of algae of 40% and 25% for low and normal nitrogen conditions respectively. Based on an oil extraction efficiency from wet biomass of 73.6% and methane yields from anaerobically digested lipid‐extracted biomass of 0.31 to 0.34 l per gram of volatile solids, the mass balance shows that recycling growth media and recovering nutrients from residual biomass through anaerobic digestion can reduce the total demand for nitrogen by 66% and phosphorus by 90%. Freshwater requirements can be reduced by 89% by recirculating growth media, and carbon requirements reduced by 40% by recycling CO₂ from biogas combustion, for normal nitrogen conditions. A variety of technology options for each step of the production process and allocation methods for coproducts used outside the production system are evaluated using LCA. Extensive sensitivity and scenario analysis is also performed to provide better understanding of uncertainty associated with results. The best performing scenario consists of normal nitrogen cultivation conditions, bioflocculation and dissolved air flotation for harvesting, centrifugation for dewatering, wet extraction with hexane, transesterification for biodiesel production, and anaerobic digestion of biomass residual, which generates biogas used in a combined heat and power unit for energy recovery. This combination of technologies and operating conditions results in life cycle energy requirements and GHG emissions of 1.02 MJ and 71 g CO₂‐equivalent per MJ of biodiesel, with cultivation and oil extraction dominating energy use and emissions. Thus, even under optimistic conditions, the near‐term performance of this biofuel pathway does not achieve the significant reductions in life cycle GHG emissions hoped for from second‐generation biofuel feedstocks.     

Growth model for raceway pond cultivation of Desmodesmus sp. MCC34 isolated from a local water body

Biofuel production by microalgae has the advantage of higher biomass productivity over land crops. The selection of potential microalgae depends on the growth in outdoor mass cultivation during different seasons, which can be predicted by a mathematical model. Here, freshwater green algae were isolated from a local water body in Pilani, Rajasthan, India (geographical coordinates: 28°22′N 75°36′E) and characterized by microscopy and ribosomal RNA analysis. The strain was submitted to the Indian Agricultural Research Institute's microbial culture collection (IARI, India) and identified as Desmodesmus sp. MCC34. This strain, along with a fresh water green algae (Chlorella minutissima), two marine green algae species (Dunaliella salina and Dunaliella tertiolecta) and two nitrogen fixing cyanobacteria (Nostoc muscorum and Anabaena doliolum), were screened for lipid productivity and growth kinetics under culture room and raceway pond conditions. Desmodesmus sp. MCC34 showed the highest specific growth rate (0.26 day^?1), biomass production (1.9 g L^?1) and lipid productivity (103 mg L^?1 day^?1). The optimal temperature and saturating light intensity for maximal growth of Desmodesmus sp. MCC34 were 35 °C and 75 μmol m^?2 s^?1 with molar extinction coefficient of 0.22 m² g^?1, respectively. Desmodesmus sp. MCC34 was then subjected to outdoor cultivation in a 20‐m long raceway pond for 18 days during March and November 2013. The areal biomass productivity and volumetric biomass productivity were 13946.23 kg ha^?1 year^?1 and 56.94 mg L^? 1day^?1 during the month of March, decreasing to 6262.28 kg ha^?1 year^?1 and 25.57 mg L^? 1day^?1 during the month of November. A mathematical model was constructed to explain the relationship between biomass production and growth parameters such as temperature, light intensity and nutrient concentration. The productivity values predicted with the proposed model correspond well with the experimental data, suggesting the validity of the model.     

Microalgal biomass production: challenges and realities

The maximum quantum yield (Φ _max), calculated from the maximum chlorophyll a specific photosynthetic rate divided by the quantum absorption per unit chlorophyll a, is 8 photons or 0.125 mol C per mol Quanta light energy. For the average solar radiation that reaches the earth’s surface this relates to a photosynthetic yield of 1.79 g(dw) m^?2 day^?1 per percentage photosynthetic efficiency and it could be doubled for sunny, dry and hot areas. Many factors determine volumetric yields of mass algal cultures and it is not simply a question of extrapolating controlled laboratory rates to large scale outdoor production systems. This is an obvious mistake many algal biotechnology start-up companies make. Closed photobioreactors should be able to outperform open raceway pond cultures because of the synergistic enhancement of a reduced boundary layer and short light/dark fluctuations at high turbulences. However, this has not been shown on any large scale and to date the industrial norm for very large production systems is open raceway production ponds. Microalgal biomass production offers real opportunities for addressing issues such as CO₂ sequestration, biofuel production and wastewater treatment, and it should be the preferred research emphasis.     

Biological CO<Subscript>2</Subscript> fixation using C<Emphasis Type="Italic">hlorella vulgaris</Emphasis> and its thermal characteristics through thermogravimetric analysis

The present research is focused on cultivation of microalgae strain Chlorella vulgaris for bio-fixation of CO₂ coupled with biomass production. In this regard, a single semi-batch vertical tubular photobioreactor and four similar photobioreactors in series have been employed. The concentration of CO₂ in the feed stream was varied from 2 to 12 % (v/v) by adjusting CO₂ to air ratio. The amount of CO₂ capture and algae growth were monitored by measuring decrease of CO₂ concentration in the gas phase, microalgal cell density, and algal biomass production rate. The results show that 4 % CO₂ gives maximum amount of biomass (0.9 g L^?1) and productivity (0.118 g L^?1 day^?1) of C. vulgaris in a single reactor. In series reactors, average productivity per reactor found to be 0.078 g L^?1 day^?1. The maximum CO₂ uptake for single reactor also found with 4 % CO_2, and it is around 0.2 g L^?1 day^?1. In series reactors, average CO₂ uptake is 0.13 g L^?1 day^?1 per reactor. TOC analysis shows that the carbon content of the produced biomass is around 40.67 % of total weight. The thermochemical characteristics of the cultivated C. vulgaris samples were analyzed in the presence of air. All samples burn above 200 °C and the combustion rate become faster at around 600 °C. Almost 98 wt% of the produced biomass is combustible in this range.     

Using CO2 to enhance carbon capture and biomass applications of freshwater macroalgae

A major limiting factor in the development of algae as a feedstock for the bioenergy industry is the consistent production and supply of biomass. This study is the first to access the suitability of the freshwater macroalgal genus Oedogonium to supply biomass for bioenergy applications. Specifically, we quantified the effect of CO₂ supplementation on the rate of biomass production, carbon capture, and feedstock quality of Oedogonium when cultured in large‐scale outdoor tanks. Oedogonium cultures maintained at a pH of 7.5 through the addition of CO₂ resulted in biomass productivities of 8.33 (±0.51) g DW m^?2 day^?1, which was 2.5 times higher than controls which had an average productivity of 3.37 (±0.75) g DW m^?2 day^?1. Under these productivities, Oedogonium had a carbon content of 41–45% and a higher heating value of 18.5 MJ kg^?1, making it an ideal biomass energy feedstock. The rate of carbon fixation was 1380 g C m^?2 yr^?1 and 1073.1 g C m^?2 yr^?1 for cultures maintained at a pH of 7.5 and 8.5, and 481 g C m^?2 yr^?1 for cultures not supplemented with CO₂. This study highlights the potential of integrating the large‐scale culture of freshwater macroalgae with existing carbon waste streams, for example coal‐fired power stations, both as a tool for carbon sequestration and as an enhanced and sustainable source of bioenergy.     

Optimization of a raceway pond system for wastewater treatment: a review

Microalgae are photosynthetic microorganisms with potential for biofuel production, CO₂ mitigation and wastewater treatment; indeed they have the capacity to assimilate pollutants in wastewaters. Light supply and distribution among the microalgae culture is one of the major challenges of photo-bioreactor design, with many studies focusing on microalgae culture systems such as raceway ponds (RWP), widely used and cost-effective systems for algal biomass production. This review focuses on possible improvements of the RWP design in order to achieve optimal microalgal growth conditions and high biomass productivities, to minimize energy consumption and to lower the capital costs of the pond. The improvement strategy is based on three aspects: (1) hydrodynamic characteristics of the raceway pond, (2) evaluation of hydrodynamic and mass transfer capacities of the pond and (3) design of the RWP. Finally, a possible optimal design for the RWP is discussed in the context of wastewater treatment.     

Immobilized Growth of the Peridinin-Producing Marine Dinoflagellate Symbiodinium in a Simple Biofilm Photobioreactor

Products from phototrophic dinoflagellates such as toxins or pigments are potentially important for applications in the biomedical sciences, especially in drug development. However, the technical cultivation of these organisms is often problematic due to their sensitivity to hydrodynamic (shear) stress that is a characteristic of suspension-based closed photobioreactors (PBRs). It is thus often thought that most species of dinoflagellates are non-cultivable at a technical scale. Recent advances in the development of biofilm PBRs that rely on immobilization of microalgae may hold potential to circumvent this major technical problem in dinoflagellate cultivation. In the present study, the dinoflagellate Symbiodinium voratum was grown immobilized on a Twin-Layer PBR for isolation of the carotenoid peridinin, an anti-cancerogenic compound. Biomass productivities ranged from 1.0 to 11.0 g m^?2 day^?1 dry matter per vertical growth surface and a maximal biomass yield of 114.5 g m^?2, depending on light intensity, supplementary CO₂, and type of substrate (paper or polycarbonate membrane) used. Compared to a suspension culture, the performance of the Twin-Layer PBRs exhibited significantly higher growth rates and maximal biomass yield. In the Twin-Layer PBR a maximal peridinin productivity of 24 mg m^?2 day^?1 was determined at a light intensity of 74 μmol m^?2 s^?1, although the highest peridinin content per dry weight (1.7 % w/w) was attained at lower light intensities. The results demonstrate that a biofilm-based PBR that minimizes hydrodynamic shear forces is applicable to technical-scale cultivation of dinoflagellates and may foster biotechnological applications of these abundant marine protists.     

Direct and indirect effects of elevated atmospheric CO2 on net ecosystem production in a Chesapeake Bay tidal wetland

The rapid increase in atmospheric CO₂ concentrations (C_a) has resulted in extensive research efforts to understand its impact on terrestrial ecosystems, especially carbon balance. Despite these efforts, there are relatively few data comparing net ecosystem exchange of CO₂ between the atmosphere and the biosphere (NEE), under both ambient and elevated C_a. Here we report data on annual sums of CO₂ (NEE_net) for 19 years on a Chesapeake Bay tidal wetland for Scirpus olneyi (C₃ photosynthetic pathway)‐ and Spartina patens (C₄ photosynthetic pathway)‐dominated high marsh communities exposed to ambient and elevated C_a (ambient + 340 ppm). Our objectives were to (i) quantify effects of elevated C_a on seasonally integrated CO₂ assimilation (NEE_net = NEE_day + NEE_night, kg C m^?2 y^?1) for the two communities; and (ii) quantify effects of altered canopy N content on ecosystem photosynthesis and respiration. Across all years, NEE_net averaged 1.9 kg m^?2 y^?1 in ambient C_a and 2.5 kg m^?2 y^?1 in elevated C_a, for the C₃‐dominated community. Similarly, elevated C_a significantly (P < 0.01) increased carbon uptake in the C₄‐dominated community, as NEE_net averaged 1.5 kg m^?2 y^?1 in ambient C_a and 1.7 kg m^?2 y^?1 in elevated C_a. This resulted in an average CO₂ stimulation of 32% and 13% of seasonally integrated NEE_net for the C₃‐ and C₄‐dominated communities, respectively. Increased NEE_day was correlated with increased efficiencies of light and nitrogen use for net carbon assimilation under elevated C_a, while decreased NEE_night was associated with lower canopy nitrogen content. These results suggest that rising C_a may increase carbon assimilation in both C₃‐ and C₄‐dominated wetland communities. The challenge remains to identify the fate of the assimilated carbon.     

Key parameters for outdoor biomass production of Scenedesmus obliquus in solar tracked photobioreactors

The biomass productivity of Scenedesmus obliquus was investigated outdoors during all seasons in solar tracked flat panel photobioreactors (PBR) to evaluate key parameters for process optimization. CO₂ was supplied by flue gas from an attached combined block heat and power plant. Waste heat from the power plant was used to heat the culture during winter. The parameters pH, CO₂, and inorganic salt concentrations were automatically adjusted to nonlimiting levels. The optimum biomass concentration increased directly with the photosynthetic active radiation (PAR) from 3 to 5 g dry weight (DW)?L^?1 for a low PAR of 10 mol photons m^?2 day^?1 and high PAR of 40–60 mol photons m^?2 day^?1, respectively. The annual average biomass yield (photosynthetic efficiency) was 0.4?±?0.5 g DW mol^?1 photons. However, biomass yields of 1.5 g DW mol^?1 photons close to the theoretical maximum were obtained at low PAR. The productivity (including the night biomass losses) ranged during all seasons from ?5 up to 30 g DW m^?2 day^?1 with a mean productivity of 9?±?7 g DW m^?2 day^?1. Low night temperatures of the culture medium and elevated day temperatures to the species-specific optimum increased the productivity. Thus, continuous regulation of the biomass concentration and the culture temperature with regard to the fluctuating weather conditions is essential for process optimization of outdoor microalgal production systems in temperate climates.     

Partitioning of ecosystem respiration of CO2 released during land‐use transition from temperate agricultural grassland to Miscanthus × giganteus

Conversion of large areas of agricultural grassland is inevitable if European and UK domestic production of biomass is to play a significant role in meeting demand. Understanding the impact of these land‐use changes on soil carbon cycling and stocks depends on accurate predictions from well‐parameterized models. Key considerations are cultivation disturbance and the effect of autotrophic root input stimulation on soil carbon decomposition under novel biomass crops. This study presents partitioned parameters from the conversion of semi‐improved grassland to Miscanthus bioenergy production and compares the contribution of autotrophic and heterotrophic respiration to overall ecosystem respiration of CO₂ in the first and second years of establishment. Repeated measures of respiration from within and without root exclusion collars were used to produce time‐series model integrations separating live root inputs from decomposition of grass residues ploughed in with cultivation of the new crop. These parameters were then compared to total ecosystem respiration derived from eddy covariance sensors. Average soil surface respiration was 13.4% higher in the second growing season, increasing from 2.9 to 3.29 g CO₂‐C m^?2 day^?1. Total ecosystem respiration followed a similar trend, increasing from 4.07 to 5.4 g CO₂‐C m^?2 day^?1. Heterotrophic respiration from the root exclusion collars was 32.2% lower in the second growing season at 1.20 g CO₂‐C m^?2 day^?1 compared to the previous year at 1.77 g CO₂‐C m^?2 day^?1. Of the total respiration flux over the two‐year time period, aboveground autotrophic respiration plus litter decomposition contributed 38.46% to total ecosystem respiration while belowground autotrophic respiration and stimulation by live root inputs contributed 46.44% to soil surface respiration. This figure is notably higher than mean figures for nonforest soils derived from the literature and demonstrates the importance of crop‐specific parameterization of respiration models.     

Microalgae mass culture: the constraints of scaling-up

There is overwhelming evidence that microalgae would be the logical source of oils for biodiesel production, the best option for CO₂ sequestration and numerous other applications. However, this apparent lucrative approach is still in its infancy. In order to impact on global energy needs, bioremediation and other potential applications, vast quantities of biomass must be produced at a reliable rate and as cost-effective as possible. When extrapolating volumetric rates from laboratory or small-scale outdoor cultures to large-scale outdoor areal production rates, it becomes apparent that many of the potential claims are either misleading or still only a dream. Open raceway ponds are at present the only feasible culture system for the production of millions of tons of biomass. To date, at best photosynthetic efficiencies of around 1.2% have been achieved, but with present understanding and know-how efficiencies of double that should be achievable, especially when vertical mixing is increased in raceway ponds.     

Evaluating industrial symbiosis and algae cultivation from a life cycle perspective

A comparative life cycle assessment (LCA) was conducted on 20 scenarios of microalgae cultivation. These scenarios examined the utilization of nutrients and CO₂ from synthetic sources and waste streams as well as the materials used to construct a photobioreactor (PBR). A 0.2-m³ closed PBR of Chlorella vulgaris at 30%-oil content by weight with the productivity of 25 g/m² × day was used as a case study. Results of the study show that the utilization of resources from waste streams mainly avoided global warming potential (GWP) and eutrophication impacts. Impacts from the production of material used to construct the PBR dominate total impacts in acidification and ozone depletion categories, even over longer PBR lifetimes; thus, the choice of PBR construction materials is important.     

Polygonal tundra geomorphological change in response to warming alters future CO2 and CH4 flux on the Barrow Peninsula

The landscape of the Barrow Peninsula in northern Alaska is thought to have formed over centuries to millennia, and is now dominated by ice‐wedge polygonal tundra that spans drained thaw‐lake basins and interstitial tundra. In nearby tundra regions, studies have identified a rapid increase in thermokarst formation (i.e., pits) over recent decades in response to climate warming, facilitating changes in polygonal tundra geomorphology. We assessed the future impact of 100 years of tundra geomorphic change on peak growing season carbon exchange in response to: (i) landscape succession associated with the thaw‐lake cycle; and (ii) low, moderate, and extreme scenarios of thermokarst pit formation (10%, 30%, and 50%) reported for Alaskan arctic tundra sites. We developed a 30 × 30 m resolution tundra geomorphology map (overall accuracy:75%; Kappa:0.69) for our ~1800 km² study area composed of ten classes; drained slope, high center polygon, flat‐center polygon, low center polygon, coalescent low center polygon, polygon trough, meadow, ponds, rivers, and lakes, to determine their spatial distribution across the Barrow Peninsula. Land‐atmosphere CO₂ and CH₄ flux data were collected for the summers of 2006–2010 at eighty‐two sites near Barrow, across the mapped classes. The developed geomorphic map was used for the regional assessment of carbon flux. Results indicate (i) at present during peak growing season on the Barrow Peninsula, CO₂ uptake occurs at ‐902.3 10⁶gC‐CO₂ day^?1 (uncertainty using 95% CI is between ?438.3 and ?1366 10⁶gC‐CO₂ day^?1) and CH₄ flux at 28.9 10⁶gC‐CH₄ day^?1(uncertainty using 95% CI is between 12.9 and 44.9 10⁶gC‐CH₄ day^?1), (ii) one century of future landscape change associated with the thaw‐lake cycle only slightly alter CO₂ and CH₄ exchange, while (iii) moderate increases in thermokarst pits would strengthen both CO₂ uptake (?166.9 10⁶gC‐CO₂ day^?1) and CH₄ flux (2.8 10⁶gC‐CH₄ day^?1) with geomorphic change from low to high center polygons, cumulatively resulting in an estimated negative feedback to warming during peak growing season.     

Inorganic carbon and pH effect on growth and lipid productivity of Tetraselmis suecica and Chlorella sp (Chlorophyta) grown outdoors in bag photobioreactors

There has been considerable interest in cultivation of green microalgae (Chlorophyta) as a source of lipid that can alternatively be converted to biodiesel. However, almost all mass cultures of algae are carbon-limited. Therefore, to reach a high biomass and oil productivities, the ideal selected microalgae will most likely need a source of inorganic carbon. Here, growth and lipid productivities of Tetraselmis suecica CS-187 and Chlorella sp were tested under various ranges of pH and different sources of inorganic carbon (untreated flue gas from coal-fired power plant, pure industrial CO₂, pH-adjusted using HCl and sodium bicarbonate). Biomass and lipid productivities were highest at pH 7.5 (320?±?29.9 mg biomass L^?1 day^?1and 92?±?13.1 mg lipid L^?1 day^?1) and pH 7 (407?±?5.5 mg biomass L^?1 day^?1 and 99?±?17.2 mg lipid L^?1 day^?1) for T. suecica CS-187 and Chlorella sp, respectively. In general, biomass and lipid productivities were pH 7.5?>?pH 7?>?pH 8?>?pH 6.5 and pH 7?>?pH 7.5?=?pH 8?>?pH 6.5?>?pH 6?>?pH 5.5 for T. suecica CS-187 and Chlorella sp, respectively. The effect of various inorganic carbon on growth and productivities of T. suecica (regulated at pH?=?7.5) and Chlorella sp (regulated at pH?=?7) grown in bag photobioreactors was also examined outdoor at the International Power Hazelwood, Gippsland, Victoria, Australia. The highest biomass and lipid productivities of T. suecica (51.45?±?2.67 mg biomass L^?1 day^?1 and 14.8?±?2.46 mg lipid L^?1 day^?1) and Chlorella sp (60.00?±?2.4 mg biomass L^?1 day^?1 and 13.70?±?1.35 mg lipid L^?1 day^?1) were achieved when grown using CO₂ as inorganic carbon source. No significant differences were found between CO₂ and flue gas biomass and lipid productivities. While grown using CO₂ and flue gas, biomass productivities were 10, 13 and 18 %, and 7, 14 and 19 % higher than NaHCO₃, HCl and unregulated pH for T. suecica and Chlorella sp, respectively. Addition of inorganic carbon increased specific growth rate and lipid content but reduced biomass yield and cell weight of T. suecica. Addition of inorganic carbon increased yield but did not change specific growth rate, cell weight or content of the cell weight of Chlorella sp. Both strains showed significantly higher maximum quantum yield (F_v/F_m) when grown under optimum pH.     

Modelling catch per unit effort of the Black Volta near the Bui dam in Ghana

The chlorophyll a concentration and water level of the Black Volta near the Bui dam were studied in relation to fish production as measured by catch per unit effort (CPUE) between February 2011 and December 2012. The primary objective was to develop a simple linear regression model for predicting CPUE levels. The mean estimated CPUE for 2011 and 2012 was lower (6.23 kg canoe^?1 day^?1) in the postwet season than in the dry season (10.86 kg canoe^?1 day^?1) with a mean of 7.95 kg canoe^?1 day^?1. Hence, the dry season was the most important season for fish catches in the study area. Predictor variables that significantly explained CPUE levels were chlorophyll a (positive correlation) and water level (negative correlation) (P = 0.0002). The model was validated with independent data from the same Black Volta in 2011 and 2012. This model, CPUE = (0.062 × chlorophyll a) ? (0.456 × water level) + 3.363, explained 91% CPUE variability. Independent validation indicated that the model had the potential to predict CPUE (as a measure of fish production) in the Black Volta near the Bui dam. Hence, the model is also a valuable tool to predict future trends in the CPUE levels of the Black Volta.     

Carbon dioxide utilisation of Dunaliella tertiolecta for carbon bio-mitigation in a semicontinuous photobioreactor

Bio-fixation of carbon dioxide (CO₂) by microalgae has been recognised as an attractive approach to offset anthropogenic emissions. Biological carbon mitigation is the process whereby autotrophic organisms, such as microalgae, convert CO₂ into organic carbon and O₂ through photosynthesis; this process through respiration produces biomass. In this study Dunaliella tertiolecta was cultivated in a semicontinuous culture to investigate the carbon mitigation rate of the system. The algae were produced in 1.2-L Roux bottles with a working volume of 1 L while semicontinuous production commenced on day 4 of cultivation when the carbon mitigation rate was found to be at a maximum for D. tertiolecta. The reduction in CO₂ between input and output gases was monitored to predict carbon fixation rates while biomass production and microalgal carbon content are used to calculate the actual carbon mitigation potential of D. tertiolecta. A renewal rate of 45 % of flask volume was utilised to maintain the culture in exponential growth with an average daily productivity of 0.07 g L^?1 day^?1. The results showed that 0.74 g L^?1 of biomass could be achieved after 7 days of semicontinuous production while a total carbon mitigation of 0.37 g L^?1 was achieved. This represented an increase of 0.18 g L^?1 in carbon mitigation rate compared to batch production of D. tertiolecta over the same cultivation period.     

<Emphasis Type="Italic">Tetraselmis suecica</Emphasis> culture for CO<Subscript>2</Subscript> bioremediation of untreated flue gas from a coal-fired power station

The accumulation of atmospheric CO₂, primarily due to combustion of fossil fuels, has been implicated in potential global climate change. The high rate of CO₂ bioremediation by microalgae has emerged as a favourable method for reducing coal-fired power plant emissions. However, coal-fired power station flue gas contains other chemicals such as SO_x which can inhibit microalgal growth. In the current study, the effect of untreated flue gas as a source of inorganic carbon on the growth of Tetraselmis in a 1000 L industrial-scale split-cylinder internal-loop airlift photobioreactor was examined. The culture medium was recycled after each harvest. Tetraselmis suecica grew very well in this airlift photobioreactor during the 7-month experiment using recycled medium from an electroflocculation harvesting unit. Increased medium SO₄ ^2? concentration as high as 870 mg SO₄ ^2??L^?1 due to flue gas addition and media recycling had no negative effect on the overall growth and productivity of this alga. The potential organic biomass productivity and carbon sequestration using an industrial-scale airlift PBR at International Power Hazelwood, Gippsland, Victoria, Australia, are 178.9?±?30 mg L^?1 day^?1 and 89.15?±?20 mg?‘C’?L^?1 day^?1, respectively. This study clearly indicates the potential of growing Tetraselmis on untreated flue gas and using recycled medium for the purpose of biofuel and CO₂ bioremediation.     

Beavers affect carbon biogeochemistry: both short‐term and long‐term processes are involved

相似文献