Physical and genetic map of the Lactococcus lactis subsp. cremoris MG1363 chromosome: comparison with that of Lactococcus lactis subsp. lactis IL 1403 reveals a large genome inversion.

A physical and genetic map of the chromosome of the Lactococcus lactis subsp. cremoris reference strain MG1363 was established. The physical map was constructed for NotI, ApaI, and SmaI enzymes by using a strategy that combines creation of new rare restriction sites by the random-integration vector pRL1 and ordering of restriction fragments by indirect end-labeling experiments. The MG1363 chromosome appeared to be circular and 2,560 kb long. Seventy-seven chromosomal markers were located on the physical map by hybridization experiments. Integration via homologous recombination of pRC1-derived plasmids allowed a more precise location of some lactococcal genes and determination of their orientation on the chromosome. The MG1363 chromosome contains six rRNA operons; five are clustered within 15% of the chromosome and transcribed in the same direction. Comparison of the L. lactis subsp. cremoris MG1363 physical map with those of the two L. lactis subsp. lactis strains IL1403 and DL11 revealed a high degree of restriction polymorphism. At the genetic organization level, despite an overall conservation of gene organization, strain MG1363 presents a large inversion of half of the genome in the region containing the rRNA operons.     

Identification of int and attP on the genome of lactococcal bacteriophage Tuc2009 and their use for site-specific plasmid integration in the chromosome of Tuc2009-resistant Lactococcus lactis MG1363.

The DNA sequence of the int-attP region of the small-isometric-headed lactococcal bacteriophage Tuc2009 is presented. In this region, an open reading frame, int, which potentially encodes a protein of 374 amino acids, representing the Tuc2009 integrase, was identified. The nucleotide sequence of the bacteriophage attachment site, attP, and the sequences of attB, attL, and attR in the lysogenic host Lactococcus lactis subsp. cremoris UC509 were determined. A sequence almost identical to the UC509 attB sequence was found to be present in the plasmid-free Tuc2009-resistant L. lactis subsp. cremoris MG1363. This site could be used for the site-specific integration of a plasmid carrying the Tuc2009 int-attP region in the chromosome of MG1363, thereby demonstrating that the application of chromosomal insertion vectors based on bacteriophage integration functions is not limited to the prophage-cured original host strain of the phage.     

Molecular characterization of plasmids pS7a and pS7b from Lactococcus lactis subsp. lactis bv. diacetylactis S50 as a base for the construction of mobilizable cloning vectors

Aims:  Strain Lactococcus lactis subsp. lactis bv. diacetylactis S50 harbours five theta-replicating plasmids (pS6, pS7a, pS7b, pS80 and pS140). The aim of this study was to characterize domains involved in the replication and conjugative mobilization of the small plasmids pS7a and pS7b, which are structurally very similar.
Methods and Results:  Complete nucleotide sequences of pS7a and pS7b were determined by cloning DNA fragments of different sizes into Escherichia coli vectors. Linearized plasmids and four Eco RI fragments of the pS7a and pS7b were cloned into an origin probe vector. Constructed plasmids (pSEV10, pSK10, pISE1a and pISE1b) were able to replicate in the strain L. lactis subsp. cremoris MG1363. In addition, experiments showed that plasmids pS7a and pS7b contained oriT sequences and their conjugative transfer directly depended on the presence of pS80 in donor cells.
Conclusions:  Plasmids pS7a and pS7b contained typical lactococcal theta replication origin and repB gene that enable them to replicate in the strain L. lactis subsp. cremoris MG1363. Plasmid pS80 plays a key role in the conjugative transfer of small plasmids.
Significance and Impact of the Study:  Plasmids pS7a and pS7b-based derivatives could be valuable tools for genetic manipulation, studying processes of plasmid maintenance and horizontal gene transfer in lactococci.     

一个含有乳链菌肽抗性基因的乳酸乳球菌质粒pTS50的鉴定

在添加乳链菌肽、乳糖及溴甲酚紫的M1 7选择培养基上 ,从 1 97个新鲜牛奶样品中筛选到 3株乳链菌肽抗性菌株 ,PCR扩增证实它们都含有乳链菌肽抗性基因。菌种生理生化特性鉴定及特异性 1 6SrDNAPCR扩增产物的序列测定结果表明这 3株菌都属于乳酸乳球菌乳酸亚种。质粒转化实验发现乳酸乳球菌乳酸亚种TS 1 640中的乳链菌肽抗性基因位于一个约47kb的大质粒pTS50上。BamHI、EcoRI、HindⅢ、NcoI、PstⅠ酶切分析和Southern杂交 ,进一步将乳链菌肽抗性基因定位于pTS50的一个约 1 9kbEcoRI酶切片段中     

TPW22, a lactococcal temperate phage with a site-specific integrase closely related to Streptococcus thermophilus phage integrases

The temperate phage TPW22, induced from Lactococcus lactis subsp. cremoris W22, and the evolutionarily interesting integrase of this phage were characterized. Phage TPW22 was propagated lytically on L. lactis subsp. cremoris 3107, which could also be lysogenized by site-specific integration. The attachment site (attP), 5'-TAAGGCGACGGTCG-3', of phage TPW22 was present on a 7.5-kb EcoRI fragment, a 3.4-kb EcoRI-HindIII fragment of which was sequenced. Sequence information revealed the presence of an integrase gene (int). The deduced amino acid sequence showed 42 and 28% identity with integrases of streptococcal and lactococcal phages, respectively. The identities with these integrase-encoding genes were 52 and 45%, respectively, at the nucleotide level. This could indicate horizontal gene transfer. A stable integration vector containing attP and int was constructed, and integration in L. lactis subsp. cremoris MG1363 was obtained. The existence of an exchangeable lactococcal phage integration module was suggested. The proposed module covers the phage attachment site, the integrase gene, and surrounding factor-independent terminator structures. The phages phiLC3, TP901-1, and TPW22 all have different versions of this module. Phylogenetically, the TPW22 Int links the phiLC3 lactococcal integrase with known Streptococcus thermophilus integrases.     

Identification of a gene required for maturation of an extracellular lactococcal serine proteinase.

Directly upstream of the Lactococcus lactis subsp. cremoris Wg2 proteinase gene is an oppositely directed open reading frame (ORF1). The complete nucleotide sequence of ORF1, encoding a 33-kilodalton protein, was determined. A protein of approximately 32 kilodaltons was synthesized when ORF1 was expressed in Escherichia coli by using a T7 RNA polymerase-specific promoter. L. lactis subsp. lactis MG1363 transformants carrying the proteinase gene but lacking ORF1 were phenotypically proteinase deficient, unlike transformants carrying both the proteinase gene and ORF1. Synthesis and secretion of proteinase antigen by L. lactis could be detected with proteinase-directed monoclonal antibodies regardless of whether ORF1 was present. The requirement of ORF1 for proteinase activation was reflected in a reduction in the molecular weight of the secreted proteinase. Furthermore, deletion of the 130 C-terminal amino acids of the Wg2 proteinase prevented attachment of the enzyme to lactococcal cells.     

Expression of green fluorescent protein in Lactococcus lactis

The gfp gene from Aequorea victoria, encoding the green fluorescent protein (GFP) has been expressed in Lactococcus lactis subsp. lactis biovar cremoris MG1363, upon construction and introduction of plasmid pLS1GFP into this host. GFP was monitored in living cells during growth to evaluate its use in molecular and physiological studies. Quantification of the levels of GFP expressed by cultures was feasible by fluorescence spectroscopy. Phase-contrast and fluorescence microscopy allowed us to distinguish, in mixed cultures, lactococcal cells expressing GFP. Our results indicate that GFP can be used as a reporter in L. lactis.     

Analysis of a region from the bacteriophage resistance plasmid pCI528 involved in its conjugative mobilization between Lactococcus strains.

A 10-kb HindIII fragment of pCI528 cloned into the nonconjugative shuttle vector pCI3340 could be transferred by conjugative mobilization from Lactococcus lactis subsp. lactis MG1363, whereas other HindIII fragments of pCI528 or the vector alone were nonmobilizable. Subcloning of this 10-kb region identified a 4.4-kb BglII-EcoRI fragment which contained all the DNA essential for transfer. Sequence analysis of a 2-kb region within this 4.4 kb-segment revealed a region rich in inverted repeats and two potential overlapping open reading frames, one of which demonstrated homology to mobilization proteins of two nonconjugative staphylococcal plasmids.     

Campbell-like integration of heterologous plasmid DNA into the chromosome of Lactococcus lactis subsp. lactis.

Integrable vectors were constructed based on the plasmid pHV60, which is essentially a pBR322 replicon carrying a chloramphenicol resistance marker, by inserting 1.3-kilobase chromosomal fragments of Lactococcus lactis subsp. lactis MG1363 into this plasmid. Three constructs as well as pHV60 were electroporated to strain MG1363. Transformants were obtained with all constructs, and also with pHV60 (albeit with low frequency). By using Southern hybridizations, it appeared that pHV60 showed homology with the chromosome of MG1363, and that it most probably uses this homology to integrate in a Campbell-like manner. The presence of chromosomal sequences in pHV60 stimulated insertion elsewhere in the chromosome by a factor of 5 to 100. In all cases the integrated plasmids were amplified, at a selective pressure of 5 micrograms of chloramphenicol per ml, to a level of approximately 15 copies per chromosome. Although the amplification was gradually lost under nonselective conditions, one copy remained stably integrated in the chromosome. The results show that a Campbell-like integration strategy can be used to improve the accessibility of the lactococcal chromosome for genetic analysis and is potentially useful in stabilizing unstable genes in lactococci.     

Campbell-like integration of heterologous plasmid DNA into the chromosome of Lactococcus lactis subsp. lactis

Integrable vectors were constructed based on the plasmid pHV60, which is essentially a pBR322 replicon carrying a chloramphenicol resistance marker, by inserting 1.3-kilobase chromosomal fragments of Lactococcus lactis subsp. lactis MG1363 into this plasmid. Three constructs as well as pHV60 were electroporated to strain MG1363. Transformants were obtained with all constructs, and also with pHV60 (albeit with low frequency). By using Southern hybridizations, it appeared that pHV60 showed homology with the chromosome of MG1363, and that it most probably uses this homology to integrate in a Campbell-like manner. The presence of chromosomal sequences in pHV60 stimulated insertion elsewhere in the chromosome by a factor of 5 to 100. In all cases the integrated plasmids were amplified, at a selective pressure of 5 micrograms of chloramphenicol per ml, to a level of approximately 15 copies per chromosome. Although the amplification was gradually lost under nonselective conditions, one copy remained stably integrated in the chromosome. The results show that a Campbell-like integration strategy can be used to improve the accessibility of the lactococcal chromosome for genetic analysis and is potentially useful in stabilizing unstable genes in lactococci.     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Determination of the domain of the Lactobacillus delbrueckii subsp. bulgaricus cell surface proteinase PrtB involved in attachment to the cell wall after heterologous expression of the prtB gene in Lactococcus lactis

Belonging to the subtilase family, the cell surface proteinase (CSP) PrtB of Lactobacillus delbrueckii subsp. bulgaricus differs from other CSPs synthesized by lactic acid bacteria. Expression of the prtB gene under its own promoter was shown to complement the proteinase-deficient strain MG1363 (PrtP(-) PrtM(-)) of Lactococcus lactis subsp. cremoris. Surprisingly, the maturation process of PrtB, unlike that of lactococcal CSP PrtPs, does not require a specific PrtM-like chaperone. The carboxy end of PrtB was previously shown to be different from the consensus anchoring region of other CSPs and exhibits an imperfect duplication of 59 amino acids with a high lysine content. By using a deletion strategy, the removal of the last 99 amino acids, including the degenerated anchoring signal (LPKKT), was found to be sufficient to release a part of the truncated PrtB into the culture medium and led to an increase in PrtB activity. This truncated PrtB is still active and enables L. lactis MG1363 to grow in milk supplemented with glucose. By contrast, deletion of the last 806 amino acids of PrtB led to the secretion of an inactive proteinase. Thus, the utmost carboxy end of PrtB is involved in attachment to the bacterial cell wall. Proteinase PrtB constitutes a powerful tool for cell surface display of heterologous proteins like antigens.     

Physical and genetic map of the chromosome of Lactococcus lactis subsp. lactis IL1403.

A combined physical and genetic map of the chromosome of Lactococcus lactis subsp. lactis IL1403 was determined. We constructed a restriction map for the NotI, ApaI, and SmaI enzymes. The order of the restriction fragments was determined by using the randomly integrative plasmid pRL1 and by performing indirect end-labeling experiments. The strain IL1403 chromosome was found to be circular and 2,420 kb in size. A total of 24 chromosomal markers were mapped on the chromosome by performing hybridization experiments with gene probes for L. lactis and various other bacteria. Integration of pRC1-derived plasmids via homologous recombination allowed more precise location of some lactococcal genes and allowed us to determine the orientation of these genes on the chromosome. Recurrent sequences, such as insertion elements and rRNA gene (rrn) clusters, were also mapped. At least seven copies of IS1076 were present and were located on 50% of the chromosome. In contrast, no copy of ISS1RS was detected. Six ribosomal operons were found on the strain IL1403 chromosome; five were located on 16% of the chromosome and were transcribed in the same direction. A comparison of the physical maps of L. lactis subsp. lactis IL1403 and DL11 showed that these two strains are closely related and that the variable regions are located mainly near the rrn gene clusters. In contrast, despite major restriction pattern dissimilarities between L. lactis IL1403 and MG1363, the overall genetic organization of the genome seems to be conserved between these two strains.     

Chromosomal stabilization of the proteinase genes in Lactococcus lactis.

The plasmid-encoded proteinase genes prtP and prtM of Lactococcus lactis subsp. cremoris Wg2 were integrated by a Campbell-like mechanism into the L. lactis subsp. lactis MG1363 chromosome by using the insertion vector pKLG610. Two transformants were obtained that differed in the number of amplified pKLG610 copies in head-to-tail arrangements on their chromosomes; MG610 contained approximately two copies, and MG611 contained about eight copies. The amplifications were stably maintained during growth in milk in the absence of antibiotics. The proteolytic activity of strain MG611 was approximately 11-fold higher than that of strain MG610 and about 1.5 times higher than that of strain MG1363(pGKV552), which carried the proteinase genes on an autonomously replicating plasmid with a copy number of approximately 5. All three strains showed rapid growth in milk with concomitant rapid production of acid. The results suggest that a limited number of copies of the proteinase genes prtP and prtM per genome is sufficient for good growth in milk.     

Chromosomal stabilization of the proteinase genes in Lactococcus lactis.

The plasmid-encoded proteinase genes prtP and prtM of Lactococcus lactis subsp. cremoris Wg2 were integrated by a Campbell-like mechanism into the L. lactis subsp. lactis MG1363 chromosome by using the insertion vector pKLG610. Two transformants were obtained that differed in the number of amplified pKLG610 copies in head-to-tail arrangements on their chromosomes; MG610 contained approximately two copies, and MG611 contained about eight copies. The amplifications were stably maintained during growth in milk in the absence of antibiotics. The proteolytic activity of strain MG611 was approximately 11-fold higher than that of strain MG610 and about 1.5 times higher than that of strain MG1363(pGKV552), which carried the proteinase genes on an autonomously replicating plasmid with a copy number of approximately 5. All three strains showed rapid growth in milk with concomitant rapid production of acid. The results suggest that a limited number of copies of the proteinase genes prtP and prtM per genome is sufficient for good growth in milk.     

Additive Effects of Two Different Plasmid-Linked Restriction and Modification Systems in Lactococcus

Two plasmids, pND801 and pND802, encoding different restriction and modification systems were isolated from Lactococcus lactis ssp. lactis LL42-1 and Lactococcus lactis ssp. cremoris LC14-1, respectively. pND802 contained one Sphl restriction enzyme site and the whole plasmid was cloned into the Sphl site of the streptococcal/ E. coli shuttle vector pSA3 generating the plasmid pND803. pND803 was stably maintained in L.lactis MG1363 harbouring pND801. The combination of the two R/M systems within L.lactis MG1363 resulted in an additive resistance towards both isometric phage and prolate phage.     

Stacking of three different restriction and modification systems in Lactococcus lactis by cotransformation

Four plasmids encoding restriction and modification (R/M) systems are described that are different in the specificity of their restrictive activity toward the small isometric phage p2 and prolate phage c2. The R/M plasmids were cotransformed into Lactococcus lactis MG1363 with pVS2, encoding resistance to chloramphenicol and erythromycin, to indicate successful transformation events. Analysis of cotransformants showed that three different R/M plasmids could be combined in L. lactis MG1363. The efficiency at which phage plaqued on the transformants decreased as the number of R/M plasmids increased. Some plasmid combinations were unstable suggesting replicon incompatibility.