Positive-selection and ligation-independent cloning vectors for large scale <Emphasis Type="Italic">in Planta</Emphasis> expression for plant functional genomics

Transient expression is an easy, rapid and powerful technique for producing proteins of interest in plants. Recombinational cloning is highly efficient but has disadvantages, including complicated, time consuming cloning procedures and expensive enzymes for large-scale gene cloning. To overcome these limitations, we developed new ligationindependent cloning (LIC) vectors derived from binary vectors including tobacco mosaic virus (pJL-TRBO), potato virus X (pGR106) and the pBI121 vector-based pMBP1. LIC vectors were modified to enable directional cloning of PCR products without restriction enzyme digestion or ligation reactions. In addition, the ccdB gene, which encodes a potent cell-killing protein, was introduced between the two LIC adapter sites in the pJL-LIC, pGR-LIC, and pMBP-LIC vectors for the efficient selection of recombinant clones. This new vector does not require restriction enzymes, alkaline phosphatase, or DNA ligase for cloning. To clone, the three LIC vectors are digested with SnaBI and treated with T4 DNA polymerase, which includes 3′ to 5′ exonuclease activity in the presence of only one dNTP (dGTP for the inserts and dCTP for the vector). To make recombinants, the vector plasmid and the insert PCR fragment were annealed at room temperature for 20 min prior to transformation into the host. Bacterial transformation was accomplished with 100% efficiency. To validate the new LIC vector systems, we were used to coexpressed the Phytophthora AVR and potato resistance (R) genes in N. benthamiana by infiltration of Agrobacterium. Coexpressed AVR and R genes in N. benthamiana induced the typical hypersensitive cell death resulting from in vivo interaction of the two proteins. These LIC vectors could be efficiently used for high-throughput cloning and laboratory-scale in planta expression. These vectors could provide a powerful tool for high-throughput transient expression assays for functional genomic studies in plants.     

Changes of 5＇ Terminal Nucleotides of PCR Primers Causing Variable T-A Cloning Efficiency

T-A cloning takes advantage of the unpaired adenosyl residue added to the 3＇ terminus of amplified DNAs by Taq and other thermostable DNA polymerase and uses a Ilnearlzed plasmld vector with a protruding 3＇ thymldylate residue at each of Its 3＇ termini to clone polymerase chain reaction （PCR）-derived DNA fragments. It Is a simple, reliable, and efficient Ilgatlon-dependent cloning method for PCR products, but the drawback of variable cloning efficiency occurs during application. In the present work, the relationship between variable T-A cloning efficiency and the different 5＇ end nucleotlde base of primers used In PCR amplification was studied. The results showed that different cloning efficiency was obtained with different primer pairs containing A, T, C and G at the 5＇ terminus respectively. The data shows that when the 5＇ end base of primer pair was adenosyl, more white colonies could be obtained In cloning the corresponding PCR product In comparison with other bases. And the least white colonies were formed when using the primer pair with 5＇ cytldylate end. The gluanylate end primers resulted In almost the same cloning efficiency In the white colonies amount as the thymldylate end primer did, and this efficiency was much lower than that of adenosyl end primers. This presumably is a consequence of variability In 3＇dA addition to PCR products mediated by Taq polymerase. Our results offer instructions for primer design for researchers who choose T-A cloning to clone PCR products.     

Seamless gene engineering using RNA- and DNA-overhang cloning

Here we describe two methods for generating DNA fragments with single-stranded overhangs, like those generated by the activity of many restriction enzymes, by simple methods that do not involve DNA digestion. The methods, RNA-overhang cloning (ROC) and DNA-overhang cloning (DOC), generate polymerase chain reaction (PCR) products composed of double-stranded (ds) DNA flanked by single-stranded (ss) RNA or DNA overhangs. The overhangs can be used to recombine DNA fragments at any sequence location, creating "perfect" chimeric genes composed of DNA fragments that have been joined without the insertion, deletion, or alteration of even a single base pair. The ROC method entails using PCR primers that contain regions of RNA sequence that cannot be copied by certain thermostable DNA polymerases. Using such a chimeric primer in PCR would yield a product with a 5' overhang identical to the sequence of the RNA component of the primer, which can be used for directional ligation of the amplified product to other preselected DNA molecules. This method provides complete control over both the length and sequence of the overhangs, and eliminates the need for restriction enzymes as tools for gene engineering.     

Uracil DNA glycosylase-mediated cloning of polymerase chain reaction-amplified DNA: application to genomic and cDNA cloning.

A simple and rapid method for cloning of amplification products directly from the polymerase chain reaction (PCR) has been developed. The method is based on the addition of a 12-base dUMP-containing sequence (CUACUACUACUA) to the 5' end of PCR primers. Incorporation of these primers during PCR results in the selective placement of dUMP residues into the 5' end of amplification products. Selective degradation of the dUMP residues in the PCR products with uracil DNA glycosylase (UDG) disrupts base pairing at the termini and generates 3' overhangs. Annealing of 3' protruding termini to vector DNA containing complementary 3' ends results in chimeric molecules which can be transformed, with high efficiency, without in vitro ligation. Directional cloning of PCR products has also been accomplished by incorporating different dU-containing sequences at the end of each PCR primer. Substitution of all dT residues in PCR primers with dU eliminates cloning of aberrant "primer dimer" products and enriches cloning of genuine PCR products. The method has been applied to cloning of inter-Alu DNA sequences from human placental DNA. Using a single primer, DNA sequences between appropriately oriented Alu sequences were amplified and cloned. Cloning of cDNA for the glyceraldehyde-3'-phosphate dehydrogenase gene from rat brain RNA was also demonstrated. The 3' end region of this gene was amplified by the 3' RACE method and the amplified DNA was cloned after UDG digestion. Characterization of cloned DNAs by sequence analysis showed accurate repair of the cloning junctions. The ligase-free cloning method with UDG should prove to be a widely applicable procedure for rapid cloning of PCR-amplified DNA.     

Subtractive Cloning of DNA from Polymyxa graminis– an Obligate Parasitic Plasmodiophorid

A simple subtractive hybridization was applied for cloning of Polymyxa graminis deoxyribonucleic acid (DNA). Total DNA preparations from concentrated P. graminis resting spores and from roots of non‐infested (healthy) barley were digested with different restriction enzymes and batch hybridized, followed by cloning in a plasmid vector. Sequencing and blast analysis of coincidentally selected clones enabled construction of polymerase chain reaction primers specific to P. graminis DNA. Four Polymyxa‐specific primers showed different affinities to DNA of type I and type II P. graminis and to DNA of P. betae.     

Two mutations in the 5′‐flanking region of the KITLG gene are associated with litter size of dairy goats

In this study, Xinong Saanen (SN) and Guanzhong (GZ) dairy goat breeds were used to detect single nucleotide polymorphisms (SNPs) in the 5′‐flanking region of the KITLG gene by DNA sequencing and primer‐introduced restriction analysis–polymerase chain reaction. Two novel SNPs (g.13090G>T and g.13664C>A) were identified (GenBank Accession no. KM658964). Furthermore, g.13090G>T and g.13664C>A loci were closely linked in SN and GZ breeds (r² > 0.33). Association analysis results showed that g.13090G>T and g.13664C>A SNPs significantly affected litter size (P < 0.05). The litter size of individuals with the combined genotype GG/CC from both dairy goat breeds was greater than that of individuals with TT/AA in average parity (P < 0.05). Known biochemical and physiological functions, along with our results, indicated that GG/CC could be used in marker‐assisted selection to choose individuals with greater litter size from both breeds. These results extend the spectrum of genetic variation in the caprine KITLG gene and may contribute to genetic resources and breeding of goats.     

Structural mechanism of ATP‐dependent DNA binding and DNA end bridging by eukaryotic Rad50

The Mre11–Rad50–Nbs1 (MRN) complex is a central factor in the repair of DNA double‐strand breaks (DSBs). The ATP‐dependent mechanisms of how MRN detects and endonucleolytically processes DNA ends for the repair by microhomology‐mediated end‐joining or further resection in homologous recombination are still unclear. Here, we report the crystal structures of the ATPγS‐bound dimer of the Rad50^NBD (nucleotide‐binding domain) from the thermophilic eukaryote Chaetomium thermophilum (Ct) in complex with either DNA or CtMre11^RBD (Rad50‐binding domain) along with small‐angle X‐ray scattering and cross‐linking studies. The structure and DNA binding motifs were validated by DNA binding experiments in vitro and mutational analyses in Saccharomyces cerevisiae in vivo. Our analyses provide a structural framework for the architecture of the eukaryotic Mre11–Rad50 complex. They show that a Rad50 dimer binds approximately 18 base pairs of DNA along the dimer interface in an ATP‐dependent fashion or bridges two DNA ends with a preference for 3′ overhangs. Finally, our results may provide a general framework for the interaction of ABC ATPase domains of the Rad50/SMC/RecN protein family with DNA.     

The DNA‐ and RNA‐binding protein FACTOR of DNA METHYLATION 1 requires XH domain‐mediated complex formation for its function in RNA‐directed DNA methylation

Studies have identified a sub‐group of SGS3‐LIKE proteins including FDM1–5 and IDN2 as key components of RNA‐directed DNA methylation pathway (RdDM). Although FDM1 and IDN2 bind RNAs with 5′ overhangs, their functions in the RdDM pathway remain to be examined. Here we show that FDM1 interacts with itself and with IDN2. Gel filtration suggests that FDM1 may exist as a homodimer in a heterotetramer complex in vivo. The XH domain of FDM1 mediates the FDM1–FDM1 and FDM1–IDN2 interactions. Deletion of the XH domain disrupts FDM1 complex formation and results in loss‐of‐function of FDM1. These results demonstrate that XH domain‐mediated complex formation of FDM1 is required for its function in RdDM. In addition, FDM1 binds unmethylated but not methylated DNAs through its coiled‐coil domain. RNAs with 5′ overhangs does not compete with DNA for binding by FDM1, indicating that FDM1 may bind DNA and RNA simultaneously. These results provide insight into how FDM1 functions in RdDM.     

Structural insight into dynamic bypass of the major cisplatin‐DNA adduct by Y‐family polymerase Dpo4

Y‐family DNA polymerases bypass Pt‐GG, the cisplatin‐DNA double‐base lesion, contributing to the cisplatin resistance in tumour cells. To reveal the mechanism, we determined three structures of the Y‐family DNA polymerase, Dpo4, in complex with Pt‐GG DNA. The crystallographic snapshots show three stages of lesion bypass: the nucleotide insertions opposite the 3′G (first insertion) and 5′G (second insertion) of Pt‐GG, and the primer extension beyond the lesion site. We observed a dynamic process, in which the lesion was converted from an open and angular conformation at the first insertion to a depressed and nearly parallel conformation at the subsequent reaction stages to fit into the active site of Dpo4. The DNA translocation‐coupled conformational change may account for additional inhibition on the second insertion reaction. The structures illustrate that Pt‐GG disturbs the replicating base pair in the active site, which reduces the catalytic efficiency and fidelity. The in vivo relevance of Dpo4‐mediated Pt‐GG bypass was addressed by a dpo‐4 knockout strain of Sulfolobus solfataricus, which exhibits enhanced sensitivity to cisplatin and proteomic alterations consistent with genomic stress.     

Evaluation of the efficiency and utility of recombinant enzyme-free seamless DNA cloning methods

Simple and low-cost recombinant enzyme-free seamless DNA cloning methods have recently become available. In vivo Escherichia coli cloning (iVEC) can directly transform a mixture of insert and vector DNA fragments into E. coli, which are ligated by endogenous homologous recombination activity in the cells. Seamless ligation cloning extract (SLiCE) cloning uses the endogenous recombination activity of E. coli cellular extracts in vitro to ligate insert and vector DNA fragments. An evaluation of the efficiency and utility of these methods is important in deciding the adoption of a seamless cloning method as a useful tool. In this study, both seamless cloning methods incorporated inserting DNA fragments into linearized DNA vectors through short (15–39 bp) end homology regions. However, colony formation was 30–60-fold higher with SLiCE cloning in end homology regions between 15 and 29 bp than with the iVEC method using DH5α competent cells. E. coli AQ3625 strains, which harbor a sbcA gene mutation that activates the RecE homologous recombination pathway, can be used to efficiently ligate insert and vector DNA fragments with short-end homology regions in vivo. Using AQ3625 competent cells in the iVEC method improved the rate of colony formation, but the efficiency and accuracy of SLiCE cloning were still higher. In addition, the efficiency of seamless cloning methods depends on the intrinsic competency of E. coli cells. The competency of chemically competent AQ3625 cells was lower than that of competent DH5α cells, in all cases of chemically competent cell preparations using the three different methods. Moreover, SLiCE cloning permits the use of both homemade and commercially available competent cells because it can use general E. coli recA^? strains such as DH5α as host cells for transformation. Therefore, between the two methods, SLiCE cloning provides both higher efficiency and better utility than the iVEC method for seamless DNA plasmid engineering.     

Directional, seamless, and restriction enzyme-free construction of random-primed complementary DNA libraries using phosphorothioate-modified primers

Directional cloning of complementary DNA (cDNA) primed by oligo(dT) is commonly achieved by appending a restriction site to the primer, whereas the second strand is synthesized through the combined action of RNase H and Escherichia coli DNA polymerase I (PolI). Although random primers provide more uniform and complete coverage, directional cloning with the same strategy is highly inefficient. We report that phosphorothioate linkages protect the tail sequence appended to random primers from the 5′ → 3′ exonuclease activity of PolI. We present a simple strategy for constructing a random-primed cDNA library using the efficient, size-independent, and seamless In-Fusion cloning method instead of restriction enzymes.     

Inhibition of Non-Homologous End Joining and integration of DNA upon transformation of <Emphasis Type="Italic">Rhizopus oryzae</Emphasis>

Site-directed integration of DNA in the fungus Rhizopus has long been problematic because linearized plasmids used for transformation tend to replicate in high-molecular-weight concatenated structures, and rarely integrate into the chromosome. This work examines the methods that might interfere with the multimerization process, select against plasmids that had recircularized, and encourage strand invasion, hopefully leading to plasmid integration. In vitro methods were used to determine if the structure of the double-strand break had any effect on the ability to rejoin plasmid ends. In cell-free extracts, little difference in end-joining activity was found between linearized plasmids with 5′ overhangs, 3′ overhangs, or blunt ends. In addition, dephosphorylation of ends had no effect. Transformation of plasmids prepared in the same ways confirmed that they were easily religated in vivo, with almost all prototrophic isolates retaining autonomously replicated plasmids. It was possible to block religation by modifying the free ends of the linearized plasmids using oligonucleotide adapters which were blocked at the 3′-OH position and contained phosphorothioate nucleotides to make them nuclease-resistant. However, gene replacement, with repair of the auxotrophic mutation in the host chromosome, was the predominant event observed upon the transformation of these plasmids. The highest rates of integration were obtained with a plasmid containing a truncated, non-functional pyrG gene. Autonomous replication of this plasmid did not support prototrophic growth, but homologous recombination into the chromosome restored the function of the endogenous pyrG gene. All of the transformants obtained with this selective construct were found to have integrated the plasmid, with multicopy insertion being common. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Rapid amplification of genomic DNA ends bynla III partial digestion and polynucleotide tailing

We report a simple and efficient method, which combines restriction endonuclease digestion and deoxynucleotide tailing, for cloning unknown genomic sequences adjacent to a known sequence. Total genomic DNA is partially digested with the frequent-cutting restriction enzymeNla III. A homo-oligomeric cytosine tail is added by terminal transferase. The tailed DNA fragments are used as the template for cloning flanking regions from all sequences of interest. A first round PCR amplification is performed with a gene-specific primer and the selective (modified polyguanine) anchor primer complementary to the cytosine tail and theNla III recognition site, with a universal amplification primer sequence at its 5′ end. This is followed by another PCR amplification with a nested gene-specific primer and the universal amplification primer. Finally, the amplified products are fractionated, cloned, and sequenced. Using this method, we cloned the upstream region of a salt-induced gene based upon a partial cDNA clone (RSC5-U) obtained from sunflower (Helianthus annuus L.).     

Random Primer Dependent PCR Differentiates Aggressive from Non-Aggressive Isolates of the Oilseed Rape Pathogen Phoma lingam (Leptosphaeria maculans)

A number of isolates of the aggressive an d non-aggressive pathotype group of the rape seed (Brassica napus) pathogen Phoma lingam (teleomorph: Leptosphaeria maculans) were analyzed by means of a simple, random primer dependent PCR (polymerase chain reaction) approach. Using the four synthetic nona- and decamer oligonucleotides 5′-GGAGCCCAC-3′, 5″-ACGGTCTTGG-3′, 5′GAAACAGCGG-3′, and 5′-GGCATCGGCC-3′ informative bands for both of the pathotype groups could be obtained. These amplified bands were shown to originate not only from repeated but also from single and low copy target sequences. This is the first report on molecular diagnostics of a plant pathogenic fungus, based on random primer dependent PCR. The experimental system is fast and reliable, does not require cloning and sequencing of L. maculans DNA, and works without time-consuming blotting or hybridization steps.     

Anonymous single‐copy nuclear DNA (scnDNA) markers for two endemic log‐dwelling beetles: Apasis puncticeps and Adelium calosomoides (Tenebrionidae: Lagriinae: Adeliini)

Three approaches — microsatellite library screening, consensus primer PCR (polymerase chain reaction) and sequencing with arbitrary primer pairs (SWAPP) — were used to develop single‐copy nuclear DNA (scnDNA) markers for log‐dwelling beetles Apasis puncticeps and Adelium calosomoides. We are unaware of other nuclear markers for Adeliini. We tested > 70 primer pairs per species, but despite exhaustive optimization, we obtained only five polymorphic markers. Nonetheless, the markers are valuable in detection of effects of habitat fragmentation.     

Universal primer cocktails for fish DNA barcoding

Reliable recovery of the 5′ region of the cytochrome c oxidase 1 (COI) gene is critical for the ongoing effort to gather DNA barcodes for all fish species. In this study, we develop and test primer cocktails with a view towards increasing the efficiency of barcode recovery. Specifically, we evaluate the success of polymerase chain reaction amplification and the quality of resultant sequences using three primer cocktails on DNA extracts from representatives of 94 fish families. Our results show that M13‐tailed primer cocktails are more effective than conventional degenerate primers, allowing barcode work on taxonomically diverse samples to be carried out in a high‐throughput fashion.     

Structural basis for a novel mechanism of DNA bridging and alignment in eukaryotic DSB DNA repair

Eukaryotic DNA polymerase mu of the PolX family can promote the association of the two 3′‐protruding ends of a DNA double‐strand break (DSB) being repaired (DNA synapsis) even in the absence of the core non‐homologous end‐joining (NHEJ) machinery. Here, we show that terminal deoxynucleotidyltransferase (TdT), a closely related PolX involved in V(D)J recombination, has the same property. We solved its crystal structure with an annealed DNA synapsis containing one micro‐homology (MH) base pair and one nascent base pair. This structure reveals how the N‐terminal domain and Loop 1 of Tdt cooperate for bridging the two DNA ends, providing a templating base in trans and limiting the MH search region to only two base pairs. A network of ordered water molecules is proposed to assist the incorporation of any nucleotide independently of the in trans templating base. These data are consistent with a recent model that explains the statistics of sequences synthesized in vivo by Tdt based solely on this dinucleotide step. Site‐directed mutagenesis and functional tests suggest that this structural model is also valid for Pol mu during NHEJ.     

Phosphorothioate-based ligase-independent gene cloning (PLICing): An enzyme-free and sequence-independent cloning method

Many ligase-independent cloning methods have been developed to overcome problems of standard restriction cloning such as low transformation efficiency and high background of vector with no insert. Most of these methods are still enzyme based, require time-consuming incubation and multiple purification steps, and/or might have a low robustness in handling. Thus, with the aim to establish a robust enzyme/ligase-free method, we developed the phosphorothioate-based ligase-independent gene cloning (PLICing) method, which is based on a chemical cleavage reaction of phosphorothioate bonds in an iodine/ethanol solution. After optimization of polymerase chain reaction (PCR) and DNA cleavage conditions, PLICing performs competitively with all commercialized methods in terms of handling and transformation efficiency. In addition, PLICing is absolutely sequence independent and surpasses other concepts regarding cloning efficiency given that none of the 240 analyzed clones showed any religation event for three different model genes. A developed fast PLICing protocol does not require any purification step and can be completed within 10 min. Due to its robustness, reliability, and simplicity, PLICing should prove to be a true alternative to other well-established cloning techniques.