Selection of ceramic fluorapatite‐binding peptides from a phage display combinatorial peptide library: optimum affinity tags for fluorapatite chromatography

Peptide affinity tags have become efficient tools for the purification of recombinant proteins from biological mixtures. The most commonly used ligands in this type of affinity chromatography are immobilized metal ions, proteins, antibodies, and complementary peptides. However, the major bottlenecks of this technique are still related to the ligands, including their low stability, difficulties in immobilization, and leakage into the final products. A model approach is presented here to overcome these bottlenecks by utilizing macroporous ceramic fluorapatite (CFA) as the stationary phase in chromatography and the CFA‐specific short peptides as tags. The CFA chromatographic materials act as both the support matrix and the ligand. Peptides that bind with affinity to CFA were identified from a randomized phage display heptapeptide library. A total of five rounds of phage selection were performed. A common N‐terminal sequence was found in two selected peptides: F4‐2 (KPRSMLH) and F5‐4 (KPRSVSG). The peptide F5‐4, displayed by more than 40% of the phages analyzed in the fifth round of selection, was subjected to further studies. Selectivity of the peptide for the chemical composition and morphology of CFA was assured by the adsorption studies. The dissociation constant, obtained from the F5‐4/CFA adsorption isotherm, was in the micromolar range, and the maximum capacity was 39.4 nmol/mg. The chromatographic behavior of the peptides was characterized on a CFA stationary phase with different buffers. Preferential affinity and specific retention properties suggest the possible application of the phage‐derived peptides as a tag in CFA affinity chromatography for enhancing the selective recovery of proteins. Copyright © 2013 John Wiley & Sons, Ltd.     

A general strategy for the bacterial expression of amyloidogenic peptides using BCL‐XL‐1/2 fusions

Biophysical studies on amyloidogenic and aggregation‐prone peptides often require large quantities of material. However, solid‐phase synthesis, handling, and purification of peptides often present challenges on these scales. Recombinant expression is an attractive alternative because of its low cost, the ability to isotopically label the peptides, and access to sequences exceeding ～50 residues. However, expression systems that seek to solubilize amyloidogenic peptides suffer from low yields, difficult optimizations, and isolation challenges. We present a general strategy for expressing and isolating amyloidogenic peptides in Escherichia coli by fusion to a polypeptide that drives the expression of attached peptides into bacterial inclusion bodies. This scheme minimizes toxicity during bacterial growth and enables the processing and handling of the peptides in denaturing solutions. Immobilized metal affinity chromatography, reverse phase HPLC, and cyanogen bromide cleavage are used to isolate the peptide, followed by further reverse phase HPLC, which yields milligram quantities of the purified peptide. We demonstrate that driving the peptides into inclusion bodies using fusion to BCL‐XL‐1/2 is a general strategy for their expression and isolation, as exemplified by the production of 11 peptides species.     

Peptide array‐based characterization and design of ZnO‐high affinity peptides

Peptides with both an affinity for ZnO and the ability to generate ZnO nanoparticles have attracted attention for the self‐assembly and templating of nanoscale building blocks under ambient conditions with compositional uniformity. In this study, we have analyzed the specific binding sites of the ZnO‐binding peptide, EAHVMHKVAPRP, which was identified using a phage display peptide library. The peptide binding assay against ZnO nanoparticles was performed using peptides synthesized on a cellulose membrane using the spot method. Using randomized rotation of amino acids in the ZnO‐binding peptide, 125 spot‐synthesized peptides were assayed. The peptide binding activity against ZnO nanoparticles varied greatly. This indicates that ZnO binding does not depend on total hydrophobicity or other physical parameters of these peptides, but rather that ZnO recognizes the specific amino acid alignment of these peptides. In addition, several peptides were found to show higher binding ability compared with that of the original peptides. Identification of important binding sites in the EAHVMHKVAPRP peptide was investigated by shortened, stepwise sequence from both termini. Interestingly, two ZnO‐binding sites were found as 6‐mer peptides: HVMHKV and HKVAPR. The peptides identified by amino acid substitution of HKVAPR were found to show high affinity and specificity for ZnO nanoparticles. Biotechnol. Bioeng. 2010;106: 845–851. © 2010 Wiley Periodicals, Inc.     

Synovial fibroblast‐targeting liposomes encapsulating an NF‐κB‐blocking peptide ameliorates zymosan‐induced synovial inflammation

Synovial fibroblasts (SFs) play a crucial role in the inflammatory process of rheumatoid arthritis (RA). The highly activated NF‐κB signal in SFs is responsible for most of the synovial inflammation associated with this disease. In this study, we have developed an SF‐targeting liposomal system that encapsulates the NF‐κB‐blocking peptide (NBD peptide) HAP‐lipo/NBD. HAP‐lipo/NBDs demonstrated efficient SF‐specific targeting in vitro and in vivo. Our study also showed a significant inhibitory effect of HAP‐lipo/NBD on NF‐κB activation, inflammatory cytokine release and SF migration capability after zymosan stimulation. Furthermore, the systemic administration of HAP‐lipo/NBDs significantly inhibited synovial inflammation and improved the pathological scores of arthritis induced by zymosan. Thus, these results suggest that an SF‐targeting NF‐κB‐blocking strategy is a potential approach for the development of alternative, targeted anti‐RA therapies.     

BiPPred: Combined sequence‐ and structure‐based prediction of peptide binding to the Hsp70 chaperone BiP

Substrate binding to Hsp70 chaperones is involved in many biological processes, and the identification of potential substrates is important for a comprehensive understanding of these events. We present a multi‐scale pipeline for an accurate, yet efficient prediction of peptides binding to the Hsp70 chaperone BiP by combining sequence‐based prediction with molecular docking and MMPBSA calculations. First, we measured the binding of 15mer peptides from known substrate proteins of BiP by peptide array (PA) experiments and performed an accuracy assessment of the PA data by fluorescence anisotropy studies. Several sequence‐based prediction models were fitted using this and other peptide binding data. A structure‐based position‐specific scoring matrix (SB‐PSSM) derived solely from structural modeling data forms the core of all models. The matrix elements are based on a combination of binding energy estimations, molecular dynamics simulations, and analysis of the BiP binding site, which led to new insights into the peptide binding specificities of the chaperone. Using this SB‐PSSM, peptide binders could be predicted with high selectivity even without training of the model on experimental data. Additional training further increased the prediction accuracies. Subsequent molecular docking (DynaDock) and MMGBSA/MMPBSA‐based binding affinity estimations for predicted binders allowed the identification of the correct binding mode of the peptides as well as the calculation of nearly quantitative binding affinities. The general concept behind the developed multi‐scale pipeline can readily be applied to other protein‐peptide complexes with linearly bound peptides, for which sufficient experimental binding data for the training of classical sequence‐based prediction models is not available. Proteins 2016; 84:1390–1407. © 2016 Wiley Periodicals, Inc.     

IgY‐binding peptide screened from a random peptide library as a ligand for IgY purification

Chicken egg yolk immunoglobulin (IgY) is a functional substitute for mammalian IgG for antigen detection. Traditional IgY purification methods involve multi‐step procedures resulting in low purity and recovery of IgY. In this study, we developed a simple IgY purification system using IgY‐specific peptides identified by T7 phage display technology. From disulfide‐constrained random peptide libraries constructed on a T7 phage, we identified three specific binding clones (Y4‐4, Y5‐14, and Y5‐55) through repeated biopanning. The synthetic peptides showed high binding specificity to IgY‐Fc and moderate affinity for IgY‐Fc (K_d: Y4‐4 = 7.3 ± 0.2 μM and Y5‐55 = 4.4 ± 0.1 μM) by surface plasmon resonance analysis. To evaluate the ability to purify IgY, we performed immunoprecipitation and affinity high‐performance liquid chromatography using IgY‐binding peptides; the result indicated that these peptides can be used as affinity ligands for IgY purification. We then used a peptide‐conjugated column to purify IgY from egg yolks pre‐treated using an optimized delipidation technique. Here, we report the construction of a cost‐effective, one‐step IgY purification system, with high purity and recovery. © 2017 The Authors. Journal of Peptide Science published by European Peptide Society and John Wiley & Sons Ltd.     

Screening and characterization of anti‐SEB peptides using a bacterial display library and microfluidic magnetic sorting

Bacterial peptide display libraries enable the rapid and efficient selection of peptides that have high affinity and selectivity toward their targets. Using a 15‐mer random library on the outer surface of Escherichia coli (E.coli), high‐affinity peptides were selected against a staphylococcal enterotoxin B (SEB) protein after four rounds of biopanning. On‐cell screening analysis of affinity and specificity were measured by flow cytometry and directly compared to the synthetic peptide, off‐cell, using peptide‐ELISA. DNA sequencing of the positive clones after four rounds of microfluidic magnetic sorting (MMS) revealed a common consensus sequence of (S/T)CH(Y/F)W for the SEB‐binding peptides R338, R418, and R445. The consensus sequence in these bacterial display peptides has similar amino acid characteristics with SEB peptide sequences isolated from phage display. The K_d measured by peptide‐ELISA off‐cell was 2.4 nM for R418 and 3.0 nM for R445. The bacterial peptide display methodology using the semiautomated MMS resulted in the discovery of selective peptides with affinity for a food safety and defense threat. Published 2014. This article is a U.S. Government work and is in the public domain in the USA. Journal of Molecular Recognition published by John Wiley & Sons, Ltd.     

Epitope‐specificity of recombinant antibodies reveals promiscuous peptide‐binding properties

Protein–peptide interactions are a common occurrence and essential for numerous cellular processes, and frequently explored in broad applications within biology, medicine, and proteomics. Therefore, understanding the molecular mechanism(s) of protein–peptide recognition, specificity, and binding interactions will be essential. In this study, we report the first detailed analysis of antibody–peptide interaction characteristics, by combining large‐scale experimental peptide binding data with the structural analysis of eight human recombinant antibodies and numerous peptides, targeting tryptic mammalian and eukaryote proteomes. The results consistently revealed that promiscuous peptide‐binding interactions, that is, both specific and degenerate binding, were exhibited by all antibodies, and the discovery was corroborated by orthogonal data, indicating that this might be a general phenomenon for low‐affinity antibody–peptide interactions. The molecular mechanism for the degenerate peptide‐binding specificity appeared to be executed through the use of 2–3 semi‐conserved anchor residues in the C‐terminal part of the peptides, in analogue to the mechanism utilized by the major histocompatibility complex–peptide complexes. In the long‐term, this knowledge will be instrumental for advancing our fundamental understanding of protein–peptide interactions, as well as for designing, generating, and applying peptide specific antibodies, or peptide‐binding proteins in general, in various biotechnical and medical applications.     

Rational design and improvement of the dimerization‐disrupting peptide selectivity between ROCK‐I and ROCK‐II kinase isoforms in cerebrovascular diseases

Human rho‐associated coiled‐coil forming kinases (ROCKs) ROCK‐I and ROCK‐II have been documented as attractive therapeutic targets for cerebrovascular diseases. Although ROCK‐I and ROCK‐II share a high degree of structural conservation and are both present in classic rho/ROCK signaling pathway, their downstream substrates and pathological functions may be quite different. Selective targeting of the two kinase isoforms with traditional small‐molecule inhibitors is a great challenge due to their surprisingly high homology in kinase domain (~90%) and the full identity in kinase active site (100%). Here, instead of developing small‐molecule drugs to selectively target the adenosine triphosphate (ATP) site of two isoforms, we attempt to design peptide agents to selectively disrupt the homo‐dimerization event of ROCK kinases through their dimerization domains which have a relatively low conservation (~60%). Three helical peptides H1, H2, and H3 are split from the kinase dimerization domain, from which the isolated H2 peptide is found to have the best capability to rebind at the dimerization interface. A simulated annealing (SA) iteration method is used to improve the H2 peptide selectivity between ROCK‐I and ROCK‐II. The method accepts moderate degradation in peptide affinity in order to maximize the affinity difference between peptide binding to the two isoforms. Consequently, hundreds of parallel SA runs yielded six promising peptide candidates with ROCK‐I over ROCK‐II (I over II [IoII]) calculated selectivity and four promising peptide candidates with ROCK‐II over ROCK‐I (II over I [IIoI]) calculated selectivity. Subsequent anisotropy assays confirm that the selectivity values range between 13.2‐fold and 83.9‐fold for IoII peptides, and between 5.8‐fold and 21.2‐fold for IIoI peptides, which are considerably increased relative to wild‐type H2 peptide (2.6‐fold for IoII and 2.0‐fold for IIoI). The molecular origin of the designed peptide selectivity is also analyzed at structural level; it is revealed that the peptide residues can be classified into conserved, non‐conserved, and others, in which the non‐conserved residues play a crucial role in defining peptide selectivity, while conserved residues confer stability to kinase‐peptide binding.     

Constructing thioether‐tethered cyclic peptides via on‐resin intra‐molecular thiol–ene reaction

Thiol–ene reactions have been used in a variety of applications that mostly involve an inter‐molecular pathway. Herein, we report a facile method to construct thioether‐tethered cyclic peptides via an intra‐molecular thiol–ene reaction. This reaction is efficient, selective, and has good residue compatibility. Short peptides with thioether tethers were constructed and were used to construct longer cyclic peptides. This synthetic method may be useful for constructing bioactive peptides. Copyright © 2016 European Peptide Society and John Wiley & Sons, Ltd.     

A novel method for selective isolation of C-terminal peptides from tryptic digests of proteins by immobilized anhydrotrypsin: application to structural analyses of the tail sheath and tube proteins from bacteriophage T4

A novel method useful for selective isolation of the C-terminal peptide from a tryptic digestion mixture of a protein has been developed by taking advantage of a unique property of anhydrotrypsin, which has a strong specific affinity for the peptides containing arginine or lysine at their C-termini. Briefly, peptides produced by tryptic digestion of a protein are fractionated by affinity chromatography on a column of immobilized anhydrotrypsin. The C-terminal peptide is recovered in a breakthrough fraction, while the remainders are adsorbed on the column (unless the protein ends in arginine or lysine). The breakthrough fraction is then subjected to reversed-phase high-performance liquid chromatography in order to purify the C-terminal peptide. Using this method, we have successfully isolated the C-terminal peptides from tryptic digests of the sheath protein (gp 18) and the tube protein (gp 19) of bacteriophage T4. The analytical results on these peptides, together with the information on the N-terminal structures of the original proteins and on the nucleotide sequences of genes 18 and 19, allowed us to establish the complete primary structures of the two proteins.     

Evaluation of lipid‐binding properties of the N‐terminal helical segments in human apolipoprotein A‐I using fragment peptides

Although the N‐terminal region in human apolipoprotein (apo) A‐I is thought to stabilize the lipid‐free structure of the protein, its role in lipid binding is unknown. Using synthetic fragment peptides, we examined the lipid‐binding properties of the first 43 residues (1–43) of apoA‐I in comparison with residues 44–65 and 220–241, which have strong lipid affinity in the molecule. Circular dichroism measurements demonstrated that peptides corresponding to each segment have potential propensity to form α‐helical structure in trifluoroethanol. Spectroscopic and thermodynamic measurements revealed that apoA‐I (1–43) peptide has the strong ability to bind to lipid vesicles and to form α‐helical structure comparable to apoA‐I (220–241) peptide. Substitution of Tyr‐18 located at the center of the most hydrophobic region in residues 1–43 with a helix‐breaking proline resulted in the impaired lipid binding, indicating that the α‐helical structure in this region is required to trigger the lipid binding. In contrast, apoA‐I (44–65) peptide exhibited a lower propensity to form α‐helical structure upon binding to lipid, and apoA‐I (44–65/S55P) peptide exhibited diminished, but not completely impaired, lipid binding, suggesting that the central region of residues 44–65 is not pivotally involved in the formation of the α‐helical structure and lipid binding. These results indicate that the most N‐terminal region of apoA‐I molecule, residues 1–43, contributes to the lipid interaction of apoA‐I through the hydrophobic helical residues. Copyright © 2008 European Peptide Society and John Wiley & Sons, Ltd.     

Regulation of plant peptide hormones and growth factors by post‐translational modification

The number, diversity and significance of peptides as regulators of cellular differentiation, growth, development and defence of plants has long been underestimated. Peptides have now emerged as an important class of signals for cell‐to‐cell communication over short distances, and also for long‐range signalling. We refer to these signalling molecules as peptide growth factors and peptide hormones, respectively. As compared to remarkable progress with respect to the mechanisms of peptide perception and signal transduction, the biogenesis of signalling peptides is still in its infancy. This review focuses on the biogenesis and activity of small post‐translationally modified peptides. These peptides are derived from inactive pre‐pro‐peptides of approximately 70–120 amino acids. Multiple post‐translational modifications (PTMs) may be required for peptide maturation and activation, including proteolytic processing, tyrosine sulfation, proline hydroxylation and hydroxyproline glycosylation. While many of the enzymes responsible for these modifications have been identified, their impact on peptide activity and signalling is not fully understood. These PTMs may or may not be required for bioactivity, they may inactivate the peptide or modify its signalling specificity, they may affect peptide stability or targeting, or its binding affinity with the receptor. In the present review, we will first introduce the peptides that undergo PTMs and for which these PTMs were shown to be functionally relevant. We will then discuss the different types of PTMs and the impact they have on peptide activity and plant growth and development. We conclude with an outlook on the open questions that need to be addressed in future research.     

mRNA display selection and solid‐phase synthesis of Fc‐binding cyclic peptide affinity ligands

Cyclic peptides are attractive candidates for synthetic affinity ligands due to their favorable properties, such as resistance to proteolysis, and higher affinity and specificity relative to linear peptides. Here we describe the discovery, synthesis and characterization of novel cyclic peptide affinity ligands that bind the Fc portion of human Immunoglobulin G (IgG; hFc). We generated an mRNA display library of cyclic pentapeptides wherein peptide cyclization was achieved with high yield and selectivity, using a solid‐phase crosslinking reaction between two primary amine groups, mediated by a homobifunctional linker. Subsequently, a pool of cyclic peptide binders to hFc was isolated from this library and chromatographic resins incorporating the selected cyclic peptides were prepared by on‐resin solid‐phase peptide synthesis and cyclization. Significantly, this approach results in resins that are resistant to harsh basic conditions of column cleaning and regeneration. Further studies identified a specific cyclic peptide—cyclo[Link‐M‐WFRHY‐K]—as a robust affinity ligand for purification of IgG from complex mixtures. The cyclo[Link‐M‐WFRHY‐K] resin bound selectively to the Fc fragment of IgG, with no binding to the Fab fragment, and also bound immunoglobulins from a variety of mammalian species. Notably, while the recovery of IgG using the cyclo[Link‐M‐WFRHY‐K] resin was comparable to a Protein A resin, elution of IgG could be achieved under milder conditions (pH 4 vs. pH 2.5). Thus, cyclo[Link‐M‐WFRHY‐K] is an attractive candidate for developing a cost‐effective and robust chromatographic resin to purify monoclonal antibodies (mAbs). Finally, our approach can be extended to efficiently generate and evaluate cyclic peptide affinity ligands for other targets of interest. Biotechnol. Bioeng. 2013; 110: 857–870. © 2012 Wiley Periodicals, Inc.     

A rapid procedure to isolate isotopically labeled peptides for NMR studies: application to the Disabled‐2 sulfatide‐binding motif

A procedure for obtaining isotopically labeled peptides, by combining affinity chromatography, urea‐equilibrated gel filtration, and hydrophobic chromatography procedures, is presented using the Disabled‐2 (Dab2) sulfatide‐binding motif (SBM) as a proof of concept. The protocol is designed to isolate unstructured, membrane‐binding, recombinant peptides that co‐purify with bacterial proteins (e.g., chaperones). Dab2 SBM is overexpressed in bacteria as an isotopically labeled glutathione S‐transferase (GST) fusion protein using minimal media containing [¹⁵N] ammonium chloride as the nitrogen source. The fusion protein is purified using glutathione beads, and Dab2 SBM is released from GST using a specific protease. It is then dried, resuspended in urea to release the bound bacterial protein, and subjected to urea‐equilibrated gel filtration. Urea and buffer reagents are removed using an octadecyl column. The peptide is eluted with acetonitrile, dried, and stored at ?80 °C. Purification of Dab2 SBM can be accomplished in 6 days with a yield of ~2 mg/l of culture. The properties of Dab2 SBM can be studied in the presence of detergents using NMR spectroscopy. Although this method also allows for the purification of unlabeled peptides that co‐purify with bacterial proteins, the procedure is more relevant to isotopically labeled peptides, thus alleviating the cost of peptide production. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Trifluoroethanol‐containing RP‐HPLC mobile phases for the separation of transmembrane peptides human glycophorin‐A,integrin alpha‐1, and p24: analysis and prevention of potential side reactions due to formic acid

Reversed‐phase high‐pressure liquid chromatography analysis and purification of three hydrophobic, aggregation‐prone peptides, composed mainly of the transmembrane (TM) sequence, were performed using elution systems containing 2,2,2‐trifluoroethanol (TFE). The addition of 10–16% TFE to a common mobile phase, such as a water/acetonitrile/propanol (PrOH) or a water/PrOH/formic acid system, markedly improved the chromatographic separation of these peptides. The superior performance of TFE‐containing systems in separating peptides over water/PrOH/formic acid systems [Bollhagen R. et al., J. Chromatogr. A, 1995; 711 : 181–186.] clearly demonstrated that adding TFE to the mobile phase is one of best methods for TM‐peptide purification. Characterization of the potential side reactions using MALDI and ESI‐LIT/Orbitrap mass spectrometry indicated that prolonged incubation of peptides in a mixture of TFE–formic acid possibly induces O‐formylation of the Ser residue and N‐formylation of the N‐terminus of peptides. The conditions for selective removal of the formyl groups from TM peptides were also screened. We believe that these results will expand our ability to analyze and prepare hydrophobic, aggregation‐prone TM peptides and proteins. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

The proteomic analysis improved by cleavage kinetics‐based fractionation of tryptic peptides

Selective enrichment of specific peptides is an effective way to identify low abundance proteins. Fractionation of peptides prior to mass spectrometry is another widely used approach to reduce sample complexity in order to improve proteome coverage.In this study, we designed a multi‐stage digestion strategy to generate peptides with different trypsin cleavage kinetics. It was found that each of the collected peptide fractions yielded many new protein identifications compared to the control group due to the reduced complexity. The overlapping peptides identified between adjacent fractions were very low, indicating that each fraction had different sets of peptides. The multi‐stage digestion strategy separates tryptic peptides with different cleavage kinetics while RPLC separates peptides with different hydrophobicity. These two separation strategies were highly orthogonal, and showed an effective multidimensional separation to improve proteome coverage.     

High‐energy water sites determine peptide binding affinity and specificity of PDZ domains

PDZ domains have well known binding preferences for distinct C‐terminal peptide motifs. For most PDZ domains, these motifs are of the form [S/T]‐W‐[I/L/V]. Although the preference for S/T has been explained by a specific hydrogen bond interaction with a histidine in the PDZ domain and the (I/L/V) is buried in a hydrophobic pocket, the mechanism for Trp specificity at the second to last position has thus far remained unknown. Here, we apply a method to compute the free energies of explicit water molecules and predict that potency gained by Trp binding is due to a favorable release of high‐energy water molecules into bulk. The affinities of a series of peptides for both wild‐type and mutant forms of the PDZ domain of Erbin correlate very well with the computed free energy of binding of displaced waters, suggesting a direct relationship between water displacement and peptide affinity. Finally, we show a correlation between the magnitude of the displaced water free energy and the degree of Trp‐sensitivity among subtypes of the HTRA PDZ family, indicating a water‐mediated mechanism for specificity of peptide binding.     

Complementary DNA display selection of high‐affinity peptides binding the vacuolating toxin (VacA) of Helicobacter pylori

Artificial peptides designed for molecular recognition of a bacterial toxin have been developed. Vacuolating cytotoxin A protein (VacA) is a major virulence factor of Helicobacter pylori, a gram‐negative microaerophilic bacterium inhabiting the upper gastrointestinal tract, particularly the stomach. This study attempted to identify specific peptide sequences with high affinity for VacA using systematic directed evolution in vitro, a cDNA display method. A surface plasmon resonance‐based biosensor and fluorescence correlation spectroscopy to examine binding of peptides with VacA identified a peptide (GRVNQRL) with high affinity. Cyclization of the peptide by attaching cysteine residues to both termini improved its binding affinity to VacA, with a dissociation constant (K_d) of 58 nm . This study describes a new strategy for the development of artificial functional peptides, which are promising materials in biochemical analyses and medical applications. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.