The influence of NBD fluorescent probe on model membranes containing POPC and DPPC

To investigate the effect of fluorescent probe on the properties of membranes, we studied model membranes composed of 1,2- dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1-palmitoyl 2-oleoyl-sn-glycero-3-phosphocholine (POPC) in the presence and absence of fluorescent probe. The morphology of giant unilamellar vesicles (GUVs) has been observed as a function of temperature and composition by fluorescence microscopy using NBD-DOPE or C₆-NBD-PC as the probe. The phase behavior of model membranes containing no fluorescent probe was investigated by ²H-NMR spectroscopy. We found that the bright phase observed on GUVs was the fluid phase enriched in POPC and the dark phase was the gel phase enriched in DPPC. NBD-DOPE and C₆-NBD-PC preferentially participated in the fluid-phase domains when GUVs were in the gel?+?fluid phase coexistence. Inclusion of both fluorescent probes (1?mol%) lowered the transition temperature of POPC/DPPC membranes. In addition, C₆-NBD-PC exhibited a stronger effect than NBD-DOPE, which was considered to be associated with the structures of fluorescent molecules.     

Amphotericin B-induced ion flux is markedly attenuated in phosphatidylglycerol membrane as evidenced by a newly devised fluorometric method

The effect of phospholipid head group on the membrane-permeabilizing activity of amphotericin B (AmB) was examined using 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) liposomes and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG) liposomes. The activity of AmB was evaluated as K⁺ influx measured as pH change inside liposomes by fluorescent measurements of 2′,7′-bis(carboxyethyl)-4 or 5-carboxyfluorescein (BCECF). AmB showed prominent permeability in POPC liposomes, whereas hardly inducing ion flux in POPG membrane. POPC added to POPG liposomes as a minor constituent markedly enhanced membrane permeability, indicating the importance of a phosphonocholine group of PC for the drug’s activity.     

Atomically detailed lipid bilayer models for the interpretation of small angle neutron and X-ray scattering data

We present a new atom density profile (ADP) model and a statistical approach for extracting structural characteristics of lipid bilayers from X-ray and neutron scattering data. Models for five lipids with varying head and tail chemical composition in the fluid phase, 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC), 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine (DPPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylserine (POPS), and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (POPG), are optimized using a simplex based method to simultaneously reproduce both neutron and X-ray scattering data. Structural properties are determined using statistical analysis of multiple optimal model structures. The method and models presented make minimal assumptions regarding the atomic configuration, while taking into account the underlying physical properties of the system. The more general model and statistical approach yield data with well defined uncertainties, indicating the precision in determining density profiles, atomic locations, and bilayer structural characteristics. Resulting bilayer structures include regions exhibiting large conformational variation. Due to the increased detail in the model, the results demonstrate the possibility of a distinct hydration layer within the interfacial (backbone) region.     

Effect of lipid composition on the topography of membrane-associated hydrophobic helices: stabilization of transmembrane topography by anionic lipids

To investigate the effect of lipid structure upon the membrane topography of hydrophobic helices, the behavior of hydrophobic peptides was studied in model membrane vesicles. To define topography, fluorescence and fluorescence quenching methods were used to determine the location of a Trp at the center of the hydrophobic sequence. For peptides with cationic residues flanking the hydrophobic sequence, the stability of the transmembrane (TM) configuration (relative to a membrane-bound non-TM state) increased as a function of lipid composition on the order: 1:1 (mol:mol) 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC):1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine ∼ 6:4 POPC:cholesterol < POPC ∼ dioleoylphosphatidylcholine (DOPC) < 1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] sodium salt (DOPG) ≤ 1,2-dioleoyl-sn-glycero-3-[phospho-l-serine] sodium salt (DOPS), indicating that the anionic lipids DOPG and DOPS most strongly stabilized the TM configuration. TM stabilization was near maximal at 20-30 mol% anionic lipid, which are physiologically relevant values. TM stabilization by anionic lipid was observed for hydrophobic sequences with a diverse set of sequences (including polyAla), diverse lengths (from 12 to 22 residues), and various cationic flanking residues (H, R, or K), but not when the flanking residues were uncharged. TM stabilization by anionic lipid was also dependent on the number of cationic residues flanking the hydrophobic sequence, but was still significant with only one cationic residue flanking each end of the peptide. These observations are consistent with TM-stabilizing effects being electrostatic in origin. However, Trp located more deeply in DOPS vesicles relative to DOPG vesicles, and peptides in DOPS vesicles showed increased helix formation relative to DOPG and all other lipid compositions. These observations fit a model in which DOPS anchors flanking residues near the membrane surface more strongly than does DOPG and/or increases the stability of the TM state to a greater degree than DOPG. We conclude that anionic lipids can have significant and headgroup structure-specific effects upon membrane protein topography.     

Interaction of eosinophil granule major basic protein with synthetic lipid bilayers: A mechanism for toxicity

Summary Eosinophil granule major basic protein (MBP) is a potent toxin for mammalian cells and helminths, but the mechaism of its toxicity is not known. Here we tested whether MBP toxicity is exerted through its effect on the lipid bilayer of its targets. Liposomes prepared from synthetic phospholipids were used as targets for MBP and their properties examined by fluorescence and circular dichroism (CD) spectroscopy. MBP caused a change in the temperature transition profiles of acidic liposomes (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidyl serine or an equimolar mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine and 1,2-dimyristoyl-sn-glycero-3-phosphatidic acid) and induced their aggregation as shown by fluorescence resonance energy transfer experiments. The CD spectra and fluorescence characteristics of MBP itself were altered by its interaction with acidic lipids. Blue shifts in the emission maxima of the Trp, and of the dimethylaminonaphthyl moiety in acrylodan-labeled MBP, and a reduction in the effectiveness of quenching of Trp fluorescence by acrylamide were observed in the presence of acidic lipids. None of these effects were noted with zwitterionic lipids. This MBP : lipid bilayer interaction resulted in fusion and lysis of liposomes as indicated by the fluorescent indicator calcein. The results demonstrate that MBP associates with acidic lipids and that it disrupts, aggregates, fuses, and lyses liposomes prepared from such lipids. Such interaction might account for its wide range of toxicity.Abbreviations used Acrylodan 6-acryloyl-2-dimethylam-inonaphthalene - CD circular dichroism - DMPA 1,2-dimyrist-oyl-sn-glycero-3-phosphatidic acid - DMPC 1,2-dimyristoyl-sn-glycero-3-phosphocholine - DPH 1,6-diphenyl-1,3,5-hexatriene - DTT dithiothreitol - FRET fluorescence resonance energy transfer - HEPES N-2-hydroxyethyl piperazine-N-2-ethane sulfonic acid - K _sv Stern-Volmer constant - K _q bimolecular quenching coefficient - _em emission wavelength - _ex excitation wavelength - MBP major basic protein - MOPC 1-oleoyl-2-hydroxy-sn-glycero-3-phosphocholine - NBD-PE N-(7-nitro-2,1,3-benzo-xadiazol-4-yl)-phosphatidylethanolamine - nMBP native major basic protein - PBS phosphate-buffered saline - POPC 1-palmit-oyl-2-oleoyl-sn-glycero-3-phosphocholine - POPS 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidyl serine - raMBP reduced and alkylated major basic protein - RHO-PE rhodamine-phosphatidylethanolamine - Tes N-tris[hydroxymethyl]-methyl-2-amino-ethane-sulfonic acid - Tris tris[hydroxymethyl]-amino-methane We would like to thank Dr. Predrag J.K. Ilich for assistance with initial data analysis, Dr. Salah S. Sedarous for the lifetime data and for helpful discussions, Dr. S. Yu. Venyaminov for helpful discussions, Mr. Kenneth D. Peters and Mr. Peter J. Callahan for assistance with some of the illustrations, and Ms. Jill Wagner for performing the radioimmunoassays. We would also like to thank Ms. Jill Kappers for excellent secretarial work. This work was supported in part by a Fellowship grant from the American Heart Association, Minnesota Affiliate, and by grants from the National Institutes of Health AI 09728 and from the Mayo Foundation. RIA-G is a Fellow of the American Heart Association.     

Effect of Membrane Composition on Antimicrobial Peptides Aurein 2.2 and 2.3 From Australian Southern Bell Frogs

The effects of hydrophobic thickness and the molar phosphatidylglycerol (PG) content of lipid bilayers on the structure and membrane interaction of three cationic antimicrobial peptides were examined: aurein 2.2, aurein 2.3 (almost identical to aurein 2.2, except for a point mutation at residue 13), and a carboxy C-terminal analog of aurein 2.3. Circular dichroism results indicated that all three peptides adopt an α-helical structure in the presence of a 3:1 molar mixture of 1,2-dimyristoyl-sn-glycero-3-phosphocholine/1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DMPC/DMPG), and 1:1 and 3:1 molar mixtures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (POPC/POPG). Oriented circular dichroism data for three different lipid compositions showed that all three peptides were surface-adsorbed at low peptide concentrations, but were inserted into the membrane at higher peptide concentrations. The ³¹P solid-state NMR data of the three peptides in the DMPC/DMPG and POPC/POPG bilayers showed that all three peptides significantly perturbed lipid headgroups, in a peptide or lipid composition-dependent manner. Differential scanning calorimetry results demonstrated that both amidated aurein peptides perturbed the overall phase structure of DMPC/DMPG bilayers, but perturbed the POPC/POPG chains less. The nature of the perturbation of DMPC/DMPG bilayers was most likely micellization, and for the POPC/POPG bilayers, distorted toroidal pores or localized membrane aggregate formation. Calcein release assay results showed that aurein peptide-induced membrane leakage was more severe in DMPC/DMPG liposomes than in POPC/POPG liposomes, and that aurein 2.2 induced higher calcein release than aurein 2.3 and aurein 2.3-COOH from 1:1 and 3:1 POPC/POPG liposomes. Finally, DiSC₃5 assay data further delineated aurein 2.2 from the others by showing that it perturbed the lipid membranes of intact S. aureus C622 most efficiently, whereas aurein 2.3 had the same efficiency as gramicidin S, and aurein 2.3-COOH was the least efficient. Taken together, these data show that the membrane interactions of aurein peptides are affected by the hydrophobic thickness of the lipid bilayers and the PG content.     

A coarse-grained approach to studying the interactions of the antimicrobial peptides aurein 1.2 and maculatin 1.1 with POPG/POPE lipid mixtures

In the present work we investigated the differential interactions of the antimicrobial peptides (AMPs) aurein 1.2 and maculatin 1.1 with a bilayer composed of a mixture of the lipids 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (POPG) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE). We carried out molecular dynamics (MD) simulations using a coarse-grained approach within the MARTINI force field. The POPE/POPG mixture was used as a simple model of a bacterial (prokaryotic cell) membrane. The results were compared with our previous findings for structures of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), a representative lipid of mammalian cells. We started the simulations of the peptide–lipid system from two different initial conditions: peptides in water and peptides inside the hydrophobic core of the membrane, employing a pre-assembled lipid bilayer in both cases. Our results show similarities and differences regarding the molecular behavior of the peptides in POPE/POPG in comparison to their behavior in a POPC membrane. For instance, aurein 1.2 molecules can adopt similar pore-like structures on both POPG/POPE and POPC membranes, but the peptides are found deeper in the hydrophobic core in the former. Maculatin 1.1 molecules, in turn, achieve very similar structures in both kinds of bilayers: they have a strong tendency to form clusters and induce curvature. Therefore, the results of this study provide insight into the mechanisms of action of these two peptides in membrane leakage, which allows organisms to protect themselves against potentially harmful bacteria.

Open image in new window

Graphical Abstract Aurein pore structure (green) in a lipid bilayer composed by POPE (blue) and POPG (red) mixture. It is possible to see water beads (light blue) inside the pore.

     

Phase Separation in Lipid Membranes

Cell membranes show complex behavior, in part because of the large number of different components that interact with each other in different ways. One aspect of this complex behavior is lateral organization of components on a range of spatial scales. We found that lipid-only mixtures can model the range of size scales, from approximately 2 nm up to microns. Furthermore, the size of compositional heterogeneities can be controlled entirely by lipid composition for mixtures such as 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC)/1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC)/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC)/cholesterol or sphingomyelin (SM)/DOPC/POPC/cholesterol. In one region of special interest, because of its connection to cell membrane rafts, nanometer-scale domains of liquid-disordered phase and liquid-ordered phase coexist over a wide range of compositions.     

Reversible sheet-turn conformational change of a cell-penetrating peptide in lipid bilayers studied by solid-state NMR

The membrane-bound conformation of a cell-penetrating peptide, penetratin, is investigated using solid-state NMR spectroscopy. The ¹³C chemical shifts of ¹³C, ¹⁵N-labeled residues in the peptide indicate a reversible conformational change from β-sheet at low temperature to coil-like at high temperature. This conformational change occurs for all residues examined between positions 3 and 13, at peptide/lipid molar ratios of 1:15 and 1:30, in membranes with 25-50% anionic lipids, and in both saturated DMPC/DMPG (1,2-dimyristoyl-sn-glycero-3-phosphatidylchloline/1,2-dimyristoyl-sn-glycero-3-phosphatidylglycerol) membranes and unsaturated POPC/POPG (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol) membranes. Thus, it is an intrinsic property of penetratin. The coil state of the peptide has C-H order parameters of 0.23-0.52 for C^α and C^β sites, indicating that the peptide backbone is unstructured. Moreover, chemical shift anisotropy lineshapes are uniaxially averaged, suggesting that the peptide backbone undergoes uniaxial rotation around the bilayer normal. These observations suggest that the dynamic state of penetratin at high temperature is a structured turn instead of an isotropic random coil. The thermodynamic parameters of this sheet-turn transition are extracted and compared to other membrane peptides reported to exhibit conformational changes. We suggest that the function of this turn conformation may be to reduce hydrophobic interactions with the lipid chains and facilitate penetratin translocation across the bilayer without causing permanent membrane damage.     

Depolarization Laplace Transform Analysis of Exchangeable Hyperpolarized Xe for Detecting Ordering Phases and Cholesterol Content of Biomembrane Models

We present a highly sensitive nuclear-magnetic resonance technique to study membrane dynamics that combines the temporary encapsulation of spin-hyperpolarized xenon (¹²⁹Xe) atoms in cryptophane-A-monoacid (CrA_ma) and their indirect detection through chemical exchange saturation transfer. Radiofrequency-labeled Xe@CrA_ma complexes exhibit characteristic differences in chemical exchange saturation transfer-driven depolarization when interacting with binary membrane models composed of different molecular ratios of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine). The method is also applied to mixtures of cholesterol and POPC. The existence of domains that fluctuate in cluster size in DPPC/POPC models at a high (75–98%) DPPC content induces up to a fivefold increase in spin depolarization time τ at 297 K. In POPC/cholesterol model membranes, the parameter τ depends linearly on the cholesterol content at 310 K and allows us to determine the cholesterol content with an accuracy of at least 5%.     

Binding of bovine seminal plasma protein BSP-A1/-A2 to model membranes: Lipid specificity and effect of the temperature

Bovine seminal plasma (BSP) contains a family of phospholipid-binding proteins. The affinity of the protein BSP-A1/-A2 for lipid membranes composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and POPC containing 30% (mol/mol) 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) or cholesterol, has been investigated by the isothermal titration calorimetry (ITC). This study confirms the association of these proteins to lipid bilayers, and provides a direct characterization of this exothermic process, at 37 °C. The measurements indicate that the protein affinity for lipid bilayers is modulated by the lipid composition, the lipid/protein ratio, and the temperature. The saturation lipid/protein ratio was increased in the presence of cholesterol and, to a lesser extent, of phosphatidylethanolamine, suggesting that it is modulated by the lipid acyl chain order. For all the investigated systems, the binding of BSP-A1/-A2 could not be modeled using a simple partitioning of the proteins between the aqueous and lipid phases. The existence of "binding sites", and lipid phase separations is discussed. The decrease of temperature, from 37 to 10 °C, converts the exothermic association of the proteins to the POPC bilayers to an endothermic process. A complementary 1-D and 2-D infrared spectroscopy study excludes the thermal denaturation of BSP-A1/-A2 as a contributor in the temperature dependence of the protein affinity for lipid bilayers. The reported findings suggest that changes in the affinity of BSP-A1/-A2 for lipid bilayers could be involved in modulating the association of these proteins to sperm membranes as a function of space and time; this would consequently modulate the extent of lipid extraction, including cholesterol, at a given place and given time.     

Thermotropism and hydration properties of POPE and POPE-cholesterol systems as revealed by solid state2H and31P-NMR

The partial phase diagram and the hydration properties of the 1-palmitoyl-2-oleoyl-phosphatidylethanolamine (POPE)-water system, in the absence and presence of 30 mol% cholesterol, have been investigated by solid state phosphorus NMR of the lipid and deuterium NMR of heavy water. The POPE-D₂O phase diagram resembles other phosphatidylethanolamine (PE)-water systems: below water-to-lipid molar ratios (R_i) of 3 the lamellar gel (L or L_c)-to-hexagonal type II (H_II) phase sequence is observed on increasing the temperature. For R_i3 the thermotropic sequence (L or L_c)-L-H_II is detected. On increasing hydration from R_i=3, the H_II phase is detected from 40°C to 85°C whereas the gel phase is observed from 40°C to 30°C. The limiting hydrations of the gel, L and H_II phases are R_i 3, 17 and 20, respectively. The number of bound water molecules per lipid is ca. 8 in both the La and HII phases. The presence of cholesterol stabilizes the hexagonal phase 20°C below temperatures at which it is observed in its absence and reduces the limiting hydration of the fluid and hexagonal phases to Ri 9 and 14, respectively. The structure and/or dynamics of the water bound to the interface are markedly modified on going from the L to the H_II phase.Abbreviations NMR Nuclear magnetic resonance - DDPE 1,2-Didodecyl-rac-glycerol-3-phosphoethanol-amine - DHPE 1,2-Dihexadecyl-sn-glycerol-3-phosphoethanol-amine - DOPE 1,2-Dioleoyl-sn-glycerol-3-phosphoethanol-amine - POPE 1-Palmitoyl-2-oleoyl-sn-glycerol-3-phosphoetha-nolamine - DAPE 1,2-Diarachinoyl-sn-glycerol-3-phosphoethanol-amine - DMPC 1,2-Dimyristol-sn-glycerol-3-phosphocholine - DPPC 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine - T_c lamellar gel-to-lamellar fluid transition temperature - T_h lamellar fluid-to-hexagonal transition temperature     

Barotropic and thermotropic bilayer phase behavior of positional isomers of unsaturated mixed-chain phosphatidylcholines

The bilayer phase transitions of six kinds of mixed-chain phosphatidylcholines (PCs) with an unsaturated acyl chain in the sn-1 or sn-2 position, 1-oleoyl-2-stearoyl- (OSPC), 1-stearoyl-2-oleoyl- (SOPC), 1-oleoyl-2-palmitoyl- (OPPC), 1-palmitoyl-2-oleoyl- (POPC), 1-oleoyl-2-myristoyl- (OMPC) and 1-myristoyl-2-oleoyl-sn-glycero-3-phosphocholine (MOPC), were observed by means of differential scanning calorimetry (DSC) and high-pressure light transmittance measurements. Bilayer membranes of SOPC, POPC and MOPC with an unsaturated acyl chain in the sn-2 position exhibited only one phase transition, which was identified as the main transition between the lamellar gel (L_β) and liquid crystalline (L_α) phases. On the other hand, the bilayer membranes of OSPC, OPPC and OMPC with an unsaturated acyl chain in the sn-1 position exhibited not only the main transition but also a transition from the lamellar crystal (L_c) to the L_β (or L_α) phase. The stability of their gel phases was markedly affected by pressure and chain length of the saturated acyl chain in the sn-2 position. Considering the effective chain lengths of unsaturated mixed-chain PCs, the difference in the effective chain length between the sn-1 and sn-2 acyl chains was proven to be closely related to the temperature difference of the main transition. That is, a mismatch of the effective chain length promotes a temperature difference of the main transition between the positional isomers. Anomalously small volume changes of the L_c/L_α transition for the OPPC and OMPC bilayers were found despite their large enthalpy changes. This behavior is attributable to the existence of a cis double bond and to significant inequivalence between the sn-1 and sn-2 acyl chains, which brings about a small volume change for chain melting due to loose chain packing, corresponding to a large partial molar volume, even in the L_c phase. Further, the bilayer behavior of unsaturated mixed-chain PCs containing an unsaturated acyl chain in the sn-1 or sn-2 position was well explained by the chemical-potential diagram of a lipid in each phase.     

Depolarization Laplace Transform Analysis of Exchangeable Hyperpolarized 129Xe for Detecting Ordering Phases and Cholesterol Content of Biomembrane Models

We present a highly sensitive nuclear-magnetic resonance technique to study membrane dynamics that combines the temporary encapsulation of spin-hyperpolarized xenon (¹²⁹Xe) atoms in cryptophane-A-monoacid (CrA_ma) and their indirect detection through chemical exchange saturation transfer. Radiofrequency-labeled Xe@CrA_ma complexes exhibit characteristic differences in chemical exchange saturation transfer-driven depolarization when interacting with binary membrane models composed of different molecular ratios of DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) and POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine). The method is also applied to mixtures of cholesterol and POPC. The existence of domains that fluctuate in cluster size in DPPC/POPC models at a high (75–98%) DPPC content induces up to a fivefold increase in spin depolarization time τ at 297 K. In POPC/cholesterol model membranes, the parameter τ depends linearly on the cholesterol content at 310 K and allows us to determine the cholesterol content with an accuracy of at least 5%.     

Fine-tuning of POPC liposomal leakage by the use of β-cyclodextrin and several hydrophobic guests

The effect of entrapped β-cyclodextrin (β-CD) on the stability of multilamellar vesicles (MLVs) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), prepared by the dehydration-rehydration method, was studied by monitoring the release of 5(6)-carboxyfluorescein encapsulated into the liposomes. Different hydrophobic guests, such as Fullerene C₆₀, have been incorporated into the POPC bilayer in order to modify the membrane composition. The kinetic results as well as ESI-MS measurements evidenced that the destabilizing activity of β-CD is due to the formation of β-CD inclusion complexes and the consequent removal of selected bilayer constituents from the liposomal membrane. Hence, when β-CD was added to the liposomes in the form of a strong, water-soluble 2:1 β-CD/C₆₀ inclusion complex, such a destabilizing effect was not observed. However, the same β-CD/C₆₀ inclusion complex does not form as a result of C₆₀ extraction from the bilayer. This may be attributed either to the overwhelming concentration of POPC with respect to C₆₀ and/or to the fact that C₆₀ is largely aggregated in the bilayer. Turbidimetric and fluorimetric determinations of lamellarity and entrapped volume of the studied MLVs provided further evidence of the alteration of the liposomal bilayer as a consequence of the addition of β-CD and/or the presence of the studied guests.     

Thermodynamic and structural study of the main phospholipid components comprising the mitochondrial inner membrane

Cardiolipin (CL) is a phospholipid found in the energy-transducing membranes of bacteria and mitochondria and it is thought to be involved in relevant biological processes as apoptosis. In this work, the mixing properties of CL and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocoline (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) at the air-water interface, have been examined using the thermodynamic framework analysis of compression isotherms. Accordingly, the values of the Gibbs energy of mixing, the more stable monolayers assayed were: POPC:CL (0.6:0.4, mol:mol) and POPE:CL (0.8:0.2, mol:mol). The results reflect that attractive forces are the greatest contributors to the total interaction in these compositions. Supported planar bilayers (SPBs) with such compositions were examined using atomic force microscopy (AFM) at different temperatures. With the POPC:CL mixture, rounded and featureless SPBs were obtained at 4 °C and 24 °C. In contrast, the extension of the POPE:CL mixture revealed the existence of different lipid domains at 24 °C and 37 °C. Three lipid domains coexisted which can be distinguished by measuring the step height difference between the uncovered mica and the bilayer. While the low and intermediate domains were temperature dependent, the high domain was composition dependent. When cytochrome c (cyt c) was injected into the fluid cell, the protein showed a preferential adsorption onto the high domain of the POPC:CL. These results suggest that the high domain is mainly formed by CL.     

Insertion of Dengue E into lipid bilayers studied by neutron reflectivity and molecular dynamics simulations

The envelope (E) protein of Dengue virus rearranges to a trimeric hairpin to mediate fusion of the viral and target membranes, which is essential for infectivity. Insertion of E into the target membrane serves to anchor E and possibly also to disrupt local order within the membrane. Both aspects are likely to be affected by the depth of insertion, orientation of the trimer with respect to the membrane normal, and the interactions that form between trimer and membrane. In the present work, we resolved the depth of insertion, the tilt angle, and the fundamental interactions for the soluble portion of Dengue E trimers (sE) associated with planar lipid bilayer membranes of various combinations of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-glycerol (POPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE), and cholesterol (CHOL) by neutron reflectivity (NR) and by molecular dynamics (MD) simulations. The results show that the tip of E containing the fusion loop (FL) is located at the interface of the headgroups and acyl chains of the outer leaflet of the lipid bilayers, in good agreement with prior predictions. The results also indicate that E tilts with respect to the membrane normal upon insertion, promoted by either the anionic lipid POPG or CHOL. The simulations show that tilting of the protein correlates with hydrogen bond formation between lysines and arginines located on the sides of the trimer close to the tip (K246, K247, and R73) and nearby lipid headgroups. These hydrogen bonds provide a major contribution to the membrane anchoring and may help to destabilize the target membrane.     

Interaction of recombinant human epidermal growth factor with phospholipid vesicles. A steady-state and time-resolved fluorescence study of the bis-tryptophan sequence (TRP49-TRP50)

The interaction of recombinant human epidermal growth factor with small unilamellar phospholipid vesicles was studied by steady-state and time-resolved fluorescence of the bis-tryptophan sequence (Trp₄₉-Trp₅₀). Steady-state anisotropy measurements demonstrate that strong binding occurred with small unilamellar vesicles made up of acidic phospholipids at acidic pH only (pH 4.7). An apparent stoichiometry for 1,2-dimyristoyl-sn-phosphoglycerol of about 12 phospholipid molecules per molecule of human epidermal growth factor was estimated. The binding appears to be more efficient at temperatures above the gel to liquid-crystalline phase transition. The conformation and the environment of the Trp-Trp sequence are not greatly modified after binding, as judged from the invariance of the excited state lifetime distribution and from that of the fast processes affecting the anisotropy decay. This suggests that the Trp-Trp sequence is not embedded within the bilayer, in contrast to the situation in surfactant micelles (Mayo et al. 1987; Kohda and Inigaki 1992).Abbreviations DMPG 1,2-dimyristoyl-sn-phosphoglycerol - hEGF human Epidermal Growth Factor - HPLC high performance liquid chromatography - MEM Maximum Entropy Method - POPC 1-palmitoyl, 2-oleoyl-sn-phosphocholine - POPS 1-palmitoyl, 2-oleoyl-sn-phosphoserine - SUV small unilamellar vesicles - Trp tryptophan - Trp-Trp bis-tryptophan     

Chemical synthesis of diphosphoinositide

A chemical synthesis of DL-1-O-(1′-palmitoyl-2′-oleoyl-sn-glycero-3′-phosphoryl)-myo-inositol-4-phosphate (diphosphoinositide) is described. Selective phosphorylation of DL-2,3; 5,6-di-O-cyclohexylidene-myo-inositol with diphenylphosphochloridate led to the corresponding 1-diphenylphosphate which was transformed into silver DL-4-O-acetyl-2,3; 5,6-di-O-cyclohexylidene-myo-inositol-1-(benzyl)phosphate. Condensation of the latter with 1-palmitoyl-2-oleoyl-sn-glycero-3-iodohydrin gave a phosphotriester which after successive deacetylation, phosphorus oxychloride treatment and removal of the protective groups yielded diphosphoinositide. The intermediate DL-1-O-[1′-palmitoyl-2′-oleoyl-sn-glycero-3′-(benzyl)phosphoryl]-2,3; 5,6-di-O-cyclohexylidene-myo-inositol was used also for a new synthesis of phosphatidylinositol.     

Poly-l-lysines and poly-l-arginines induce leakage of negatively charged phospholipid vesicles and translocate through the lipid bilayer upon electrostatic binding to the membrane

Poly-l-lysines (PLL) and poly-l-arginines (PLA) of different polymer chain lengths interact strongly with negatively charged phospholipid vesicles mainly due to their different electrical charges. 1-Palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), 1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG) and their mixtures (1/1 mol/mol) with the respective phosphatidylcholines of equivalent chain length were chosen as model membrane systems that form at room temperature either the fluid L_α or the gel phase L_β lipid bilayer membranes, respectively. Leakage experiments revealed that the fluid POPG membranes are more perturbed compared to the gel phase DPPG membranes upon peptide binding. Furthermore, it was found that pure PG membranes are more prone to release the vesicle contents as a result of pore formation than the lipid mixtures POPG/POPC and DPPG/DPPC. For the longer polymers (≥ 44 amino acids) maximal dye-release was observed when the molar ratio of the concentrations of amino acid residues to charged lipid molecules reached a value of R_P = 0.5, i.e. when the outer membrane layer was theoretically entirely covered by the polymer. At ratios lower or higher than 0.5 leakage dropped significantly. Furthermore, PLL and PLA insertions and/or translocations through lipid membranes were analyzed by using FITC-labeled polymers by monitoring their fluorescence intensity upon membrane binding. Short PLL molecules and PLA molecules of all lengths seemed to translocate through both fluid and gel phase lipid bilayers. Comparison of the PLL and PLA fluorescence assay results showed that PLA interacts stronger with phospholipid membranes compared to PLL. Isothermal titration calorimetry (ITC) measurements were performed to give further insight into these mechanisms and to support the findings obtained by fluorescence assays. Cryo-transmission electron microscopy (cryo-TEM) was used to visualize changes in the vesicles' morphology after addition of the polypeptides.