Reactivity of [PdCl(μ-med)]2 with monodentate or bidentate ligands. Structure of the dinuclear complexes [Pd(μ-med)(PPh3)]2(BF4)2 and [Pd(μ-med)(bpy)]2(BF4)2. [Hmed=N-(2-mercaptoethyl)-3,5-dimethylpyrazole]

Treatment of the ligand N-(2-mercaptoethyl)-3,5-dimethylpyrazole with [Pd(CH₃COO)₂]₃ and reaction of [PdCl(μ-med)]₂ with pyridine (py) or triphenylphosphine (PPh₃) in the presence of AgBF₄ produced the following complexes: [Pd(CH₃COO)(μ-med)]₂, [Pd(μ-med)(py)]₂(BF₄)₂ and [Pd(μ-med)(PPh₃)]₂(BF₄)₂. Similar reactions carried out with 2,2^′-bipyridine (bpy) or 1,3-bis(diphenylphosphino)propane (dppp) produced [Pd(μ-med)(bpy)]_x(BF₄)_x (x=1 or 2) and [Pd(μ-med)(dppp)]_x(BF₄)_x (x=1 or 2). Treatment of [Pd(μ-med)(bpy)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced [Pd₃Cl₂(μ-med)₂(bpy)₂](BF₄)₂. Treatment of [Pd(μ-med)(dppp)]_x(BF₄)_x with [PdCl₂(CH₃CN)₂] produced a mixture of [Pd(μ-Cl)(dppp)]₂(BF₄)₂ and [Pd(μ-med)₂(dppp)]²⁺. X-ray crystal structures of [Pd(μ-med)(PPh₃)]₂(BF₄)₂ · 2CH₃CN and [Pd(μ-med)(bpy)]₂(BF₄)₂ · 0.5CH₃OH are presented.     

Synthesis, characterisation and structural studies of [Cu(dach)(μ-NCS)(NCS)]n and [Cu(dach)2(N3)]ClO4 (dach=1,4-diazacycloheptane)

A new singly bridging complex [Cu(dach)(μ-NCS)(NCS)]_n (dach=1,4-diazacycloheptane) has been synthesised and its crystal structure determined. There are many examples of double NCS bridged polymeric chains, but fewer singly bridged ones. IR, ESR and temperature variable magnetic studies are described but no magnetic interaction was found between the copper centres. [Cu(dach)₂(N₃)]ClO₄ has also been characterised by IR, ESR spectra and magnetic studies. The crystal structure determination shows that it is a penta-coordinated monomeric species with an axially coordinated azide linked to the perchlorate counterion by hydrogen bonding.     

Synthesis and characterisation of [Pt2(μ-S)(μ-I)(PPh3)4] - A cationic iodo analogue of the metalloligand [Pt2(μ-S)2(PPh3)4]

Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with a number of transition metal-iodo complexes leads to the formation of the cationic iodo analogue [Pt₂(μ-S)(μ-I)(PPh₃)₄]⁺, identified using electrospray ionisation mass spectrometry (ESI MS). Synthetic routes to this complex were developed, using the reaction of [Pt₂(μ-S)₂(PPh₃)₄] with either [PtI₂(PPh₃)₂] or elemental iodine. The complex was characterised by NMR spectroscopy, ESI MS and an X-ray structure determination, which reveals the presence of a planar, disordered {Pt₂SI}⁺ core. Monitoring the iodine reaction by ESI MS allows the identification of various iodine species, including the short-lived intermediate [Pt₂(μ-S)₂(PPh₃)₄I]⁺, which allows a mechanism for the reaction to be proposed.     

Thallium(III) complexes of the metalloligands [Pt2(μ-S)2(PPh3)4] and [Pt2(μ-Se)2(PPh3)4]

Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with the diarylthallium(III) bromides Ar₂TlBr [Ar = Ph and p-ClC₆H₄] in methanol gave good yields of the thallium(III) adducts [Pt₂(μ-S)₂(PPh₃)₄TlAr₂]⁺, isolated as their salts. The corresponding selenide complex [Pt₂(μ-Se)₂(PPh₃)₄TlPh₂]BPh₄ was similarly synthesised from [Pt₂(μ-Se)₂(PPh₃)₄], Ph₂TlBr and NaBPh₄. The reaction of [Pt₂(μ-S)₂(PPh₃)₄] with PhTlBr₂ gave [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]⁺, while reaction with TlBr₃ gave the dibromothallium(III) adduct [Pt₂(μ-S)₂(PPh₃)₄TlBr₂]⁺[TlBr₄]⁻. The latter complex is a rare example of a thallium(III) dihalide complex stabilised solely by sulfur donor ligands. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄TlPh₂]BPh₄, [Pt₂(μ-S)₂(PPh₃)₄TlBrPh]BPh₄ and [Pt₂(μ-S)₂(PPh₃)₄TlBr₂][TlBr₄] reveal a greater interaction between the thallium(III) centre and the two sulfide ligands on stepwise replacement of Ph by Br, as indicated by shorter Tl-S and Pt?Tl distances, and an increasing S-Tl-S bond angle. Investigations of the ESI MS fragmentation behaviour of the thallium(III) complexes are reported.     

Hyponitrite complexes: Crystal and molecular structure of [Ru2(CO)4(μ-PBu2)(μ-Ph2PCH2PPh2)(μ-η-ONNOMe)]

The new trans-hyponitrite derivative complex [Ru₂(CO)₄(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)] (2, dppm = Ph₂PCH₂PPh₂) was prepared by deprotonation of [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNOMe)][BF₄] (1) with the base DBU (1.8-diazabicyclo[5.4.0]undec-7-ene). The latter complex salt has been obtained in an improved synthesis starting from the trans-hyponitrite complex [Ru₂(CO)₄(μ-H)(μ-P^tBu₂)(μ-dppm)(μ-η²-ONNO)]. Compound 2 has been characterized by spectroscopic methods as well as by X-ray diffraction and represents the first neutral complex bearing a deprotonated monoester of the hyponitrous acid as the bridging ligand.     

Chalcogenide-capped triruthenium clusters: X-ray structures of [Ru3(CO)6(μ3-CO){P(C4H3S)3}(μ-dppm)(μ3-O)] and [(μ-H)2Ru3(CO)6{P(C4H3S)3}(μ-dppm)(μ3-S)]

Treatment of [Ru₃(CO)₉{P(C₄H₃S)₃}(μ-dppm)] (1) [dppm = bis(diphenylphosphino)methane] with molecular oxygen in benzene at 60 °C affords oxo-capped [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-O)] (2), while with elemental sulfur and selenium related chalcogenide-capped clusters [Ru₃(CO)₆(μ₃-CO){P(C₄H₃S)₃}(μ-dppm)(μ₃-E)] (3, E = S; 5, E = Se) and bis(chalcogenide) clusters [Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-E)₂] (4, E = S; 6, E = Se) result. Reaction of 1 with H₂S in refluxing THF affords the previously reported [(μ-H)₂Ru₃(CO)₇(μ-dppm)(μ₃-S)] (7) together with the new sulfido-capped dihydride [(μ-H)₂Ru₃(CO)₆{P(C₄H₃S)₃}(μ-dppm)(μ₃-S)] (8). All new compounds have been characterized by spectroscopic data, and 2 and 8 by single-crystal X-ray diffraction analyses. Oxo-capped 2 consists of a triangular ruthenium framework capped on opposite sides by oxo and carbonyl groups, while 8 consists of a ruthenium triangle by a capping sulfido ligand and two inequivalent bridging hydride ligands.     

The arylation of [Pt2(μ-S)2(PPh3)4]

Routes to the synthesis of the mixed sulfide-phenylthiolate complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ have been explored; reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess Ph₂IBr proceeds readily to selectively produce this complex, which was structurally characterised as its PF₆⁻ salt. Reactions of [Pt₂(μ-S)₂(PPh₃)₄] with other potent arylating reagents (1-chloro-2,4-dinitrobenzene and 1,5-difluoro-2,4-dinitrobenzene) also produce the corresponding nitroaryl-thiolate complexes [Pt₂(μ-S){μ-SC₆H₂(NO₂)₂X}(PPh₃)₄]⁺ (X = H, F). The complex [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ reacts with Me₂SO₄ to produce the mixed alkyl/aryl bis-thiolate complex [Pt₂(μ-SMe)(μ-SPh)(PPh₃)₄]²⁺, but corresponding reactions with the nitroaryl-thiolate complexes are plagued by elimination of the nitroaryl group and formation of [Pt₂(μ-SMe)₂(PPh₃)₄]²⁺. [Pt₂(μ-S)(μ-SPh)(PPh₃)₄]⁺ also reacts with Ph₃PAuCl to give [Pt₂(μ-SAuPPh₃)(μ-SPh)(PPh₃)₄]²⁺.     

Synthesis of some pentanuclear platinum clusters [Pt5(CO)6(L)4]. The X-ray structure of [Pt5(μ-CO)5(CO)(PCy3)4]

[Pt₅(μ-CO)₅(CO)L₄] (L = PPh₃1, PPh₂Bz 2, AsPh₃3, PEt₃4, PCy₃5) have been synthesized by reacting [Pt₃(μ-CO)₃(PR₃)₃] with H₂O₂ (1 and 2), by reduction of cis-[PtCl₂(CO)(PEt₃)] with Zn dust (4), and by the Zn reduction of [Pt₃(μ-CO)₃(PCy₃)₃] in the presence of [PtCl₂(CH₃CN)₂] (5). Complex 5 has not been observed previously and has been characterized by X-ray crystallography. Oxidation of the phosphine ligands with H₂O₂ is a new way to synthesize 1 and 2. The first complete NMR characterization of these complexes has also been achieved, and showed that these pentanuclear cluster complexes exhibit similar stereochemistries in solution and in the solid state. The observed ¹J_Pt-Pt values do not have any correlation with the corresponding bond lengths, again pointing out the irregular behaviour of such parameter in Pt complexes.     

Hydrido-derivatives of [Ir4(CO)10(diphosphine)]: X-ray analyses of [Ir4H(CO)9(μ-Ph2PH(CH3)PPh2)] and [Ir4 H(CO)9(μ-Ph2P(CH2)nPPh2)] (n = 2, 3)

Some novel hydrido-anions of general formula [Ir₄H(CO)₉(μ-L-L)]⁻ (L-L = Ph₂PCH(CH₃)PPh₂, Ph₂P(CH₂)₂PPh₂, Ph₂P(CH₂)₃PPh₂ and Ph₂AsCH₂AsPh₂) have been obtained by the reaction of [Ir₄(CO)₁₀(μ-L-L)] with the base 1,8-diazabicyclo[5.4.0]undec-7-ene in wet dichloromethane. According to IR and ¹H, ³¹P and ¹³C NMR data at low temperature, these anionic derivatives display a single conformation in solution: three edge-bridging COs around the triangular basal face and both the hydride and the bidentate ligands located in axial positions relative to this face. The structures of four compounds were established by X-ray diffraction studies, which confirmed the configuration proposed on the basis of spectroscopic data.     

Molecular structure of tetranuclear [{Mo2O(S2CNEt2)(η-O2CCF3)(μ-N-o-tol)2}2(μ-O)(μ-O2CCF3)2] formed upon addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S2CNEt2)]2

Addition of trifluoroacetic acid to syn-[MoO(μ-N-o-tol)(S₂CNEt₂)]₂ in chloroform affords tetranuclear [{Mo₂O(S₂CNEt₂)(η¹-O₂CCF₃)(μ-N-o-tol)₂}₂(μ-O)(μ-O₂CCF₃)₂] which has been crystallographically characterised. It consists of four molybdenum(V) centres linked via bridging imido, trifluoroacetate and oxo ligands and results from replacement of a dithiocarbamate by two trifluoroacetate ligands.     

Synthesis and characterisation of adducts of [Pt2(μ-S)2(PPh3)4] with organo-palladium and platinum-hydride substrates

The reactions of [Pt₂(μ-S)₂(PPh₃)₄] towards a range of palladium(II) complexes containing organometallic ligands (cyclopalladated N-donor ligands, η³-allyl, phenyl) have been explored, leading to the formation of a series of cationic, trinuclear sulfido-bridged aggregates containing {Pt₂PdS₂} cores. [Pt₂(μ-S)₂(PPh₃)₄] also reacts with the platinum(II) hydride complex trans-[PtHCl(PPh₃)₂] giving the adduct [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]⁺. X-ray crystal structure determinations on the complexes [Pt₂(μ-S)₂(PPh₃)₄PdPh(PPh₃)]PF₆ and [Pt₂(μ-S)₂(PPh₃)₄PtH(PPh₃)]PF₆ are reported, and show the expected bis μ₃-sulfido aggregates with three square-planar metal centres.     

Stoichiometric and catalytic hydrogenation of the [Co2(CO)6(μ2-η2-alkyne)] complexes

The [Co₂(CO)₆(RC₂R′)] complexes (R, R′ = H, Me, Et, Prⁿ) react with molecular hydrogen under mild conditions of temperature and pressure, at low but appreciable rates. The effect of the steric hindrance of the substituents and the strength of the metalcarbon bonds are discussed. The kinetic data measured for [Co₂(CO)₆(HC₂H)], suggest that both H₂-coordination and CO-dissociation are involved in the rate-determining step of the overall hydrogenation process.The catalytic activity of [Co₂(CO)₆(HC₂H)] in the homogeneous hydrogenation of acetylene is described. At low substrate/catalyst ratio the initial hydrogenation rate is equal, within experimental error, to that found for the stoichiometric reaction; on increasing the acetylene concentration, cyclotrimerization to benzene becomes the dominant process. Interestingly C₄ hydrocarbons (mainly butadiene and 1-butene) are produced in measurable yield (?8%). The formation of these products is interpreted as the result of the hydrogenation of the elusive [Co₂(CO)₅(HC₂H)₂] complex, an unstable intermediate in the cyclotrimerization chain.     

Fe-Rh and Fe-Ir clusters substituted by diphenylacetylene: Synthesis, solid state structure and electrochemical behaviour of [Fe2Ir2(CO)10(μ4:η-PhCCPh)], [FeIr2(CO)9(μ3:η-PhCCPh)], and [Fe2Rh(CO)8(μ3:η-PhCCPh)]

The reaction between [Fe₂Ir₂(CO)₁₂]²⁻ and diphenylacetylene in refluxing CH₃CN yields the substituted cluster [Fe₂Ir₂(CO)₁₀(PhC₂Ph)]²⁻ (1). In the crystals, the four metal atoms define a butterfly arrangement whose Ir-Ir hinge is parallel to the acetylenic C₂ unit. The neutral triangular cluster [FeIr₂(CO)₉(PhC₂Ph)] (2) is obtained by the treatment of 1 with acids at room temperature; in this 48 valence electrons species, the C-C and the Ir-Ir bonds are also parallel, in the coordination mode.The cluster [Fe₂Rh(CO)₁₀]⁻ reacts with diphenylacetylene in refluxing THF yielding [Fe₂Rh(CO)₈(PhC₂Ph)]⁻ (3). In this 46 C.V.E.’s cluster, the C₂ unit is perpendicular to the Fe-Fe edge, exemplifying the bonding mode. According to ¹³C NMR spectra, the structure of the three clusters is maintained in solution. Electrochemical investigations show that the one-electron oxidation of [Fe₂Ir₂(CO)₁₀(L)]²⁻ (L = 2CO, PhC₂Ph) as well as the one-electron reduction of [Fe₂Rh(CO)₈(PhC₂Ph)]⁻ only generates the respective short lived products.     

Aqueous Speciation of ansa- and non-ansa- Substituted [Cp2Mo(μ-OH)]2[OTs]2

Titration curves were measured for three molybdocene dimers, [Cp₂Mo(μ-OH)]₂[OTs]₂ (4), [Mo(μ-OH)]₂[OTs]₂ (4′; Cp′ = C₅H₄CH₃), and ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ (4^a), and for two monomeric molybdocene complexes, Cp₂MoO (6) and Cp₂MoCl₂ (1). The titration curves for 4, 6, and 1 were identical and showed three equivalence points each. The titration curve for 4′ was also similar in appearance but the equivalence points were shifted higher by ∼0.3, as expected for the more electron-rich Mo center in this molecule. The titration curve for the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex showed only two equivalence points. Two of the equivalence points observed in the titration of 4, 6, and 1 were previously reported in potentiometric measurements of aqueous solutions of Cp₂MoCl₂ and were attributed to the Cp₂Mo(OH₂)²⁺ species (pK_a = 5.5 ± 0.1 and 8.3 ± 0.2). The third equivalence point (pK_a = 2.2 ± 0.2) is assigned to protonation/deprotonation of the [Cp₂Mo(μ-OH)]₂[OTs]₂/[Cp₂Mo(μ-OH₂)(μ-OH)MoCp₂]³⁺ dimer. A new equilibrium scheme is proposed for the aquated molybdocenes to provide a more complete picture of the aqueous speciation of the non-ansa molybdocene complexes, specifically by accounting for the third acidic proton in the titration curves and by describing the hydrolysis of Cp₂MoO. Although the titration curve of the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex is different from that of [Cp₂Mo(μ-OH)]₂[OTs]₂, ¹H NMR data suggest that the aqueous speciation of the ansa-[C₂Me₄Cp₂Mo(μ-OH)]₂[OTs]₂ complex is analogous to that of the non-ansa molybdocenes.     

N-Heterocyclic carbene gold(I) and silver(I) adducts of [Pt2(μ-S)2(PPh3)4]

Reaction of the metalloligand [Pt₂(μ-S)₂(PPh₃)₄] with the N-heterocyclic carbene (NHC) complexes IPrAuCl, IMesAuCl and IMesAgCl in methanol gave the first examples of metal adducts of [Pt₂(μ-S)₂(PPh₃)₄] that contain NHC ligands, namely [Pt₂(μ-S)₂(PPh₃)₄AuL]⁺ (L = IPr, IMes) and [Pt₂(μ-S)₂(PPh₃)₄AgIMes]⁺. The complexes were isolated as hexafluorophosphate salts. Reaction of [Pt₂(μ-S)₂(PPh₃)₄] with excess IPrAuCl in refluxing methanol yielded only the mono-adduct, in contrast to the behaviour with the gold(I) phosphine complex Ph₃PAuCl, which undergoes double addition giving [Pt₂(μ-SAuPPh₃)₂(PPh₃)₄]²⁺. The X-ray structure of [Pt₂(μ-S)₂(PPh₃)₄AuIPr]PF₆ was determined and reveals that the ‘free’ sulfide is substantially sterically protected by the IPr ligand, accounting for the low reactivity towards addition of a second AgIPr⁺ moiety.     

A novel tetranuclear hydrogenphosphate-bridged Cu(II) cluster. Synthesis, structure, spectroscopy and magnetism of [Cu4(dpyam)4(μ4,η-HPO4)2(μ-X)2]X2(H2O)6 (X = Cl, Br)

Two novel tetranuclear compounds with an unprecedented mode of a hydrogenphosphato bridge, [Cu₄(dpyam)₄(μ₄,η³-HPO₄)₂(μ-X)₂]²⁺ (in which dpyam = di-2-pyridylamine and X = Cl (1), Br (2)) have been synthesised and characterised structurally and magnetically. The Cu(II) ions in the structures each display a square-pyramidal geometry, with two tridentate hydrogenphosphato groups bridging four copper atoms in a μ₄,η³ coordination mode which is rarely found in hydrogenphosphate metal compounds. Each (different) pair of Cu(II) ions is additionally bridged by halide ions, with relatively long Cu-X distances (2.551(3)-2.604(3) Å for 1 and 2.707(1)-2.766(2) Å for 2) and subsequently also a small Cu-X-Cu angle (65.7(1)° and 65.1(1)° for 1 and 61.6(1)° and 62.4(1) for 2) and a large Cu-X-Cu angle (95.5(1)° and 96.5(1)° for 1 and 91.1(1)° and 92.6(1)° for 2). Cu?Cu distances in the tetranuclear units varies from 2.802(3) to 5.232(3) Å for 1 and from 2.834(1) to5.233(1) Å in 2. The lattice structures are stabilised by extensive intermolecular hydrogen bonds. The magnetic susceptibility measurements down to 5 K revealed a weak ferromagnetic interaction between the outer pairs of Cu(II) ions which vary from 22 to 46 cm⁻¹ in 1 and 12 to 33 cm⁻¹ in 2 and a moderately strong antiferromagnetic interaction between the inner Cu(II) ions of −79 cm⁻¹ in 1 and −83 cm⁻¹ in 2, via the Cu-O-P-O-Cu pathway.     

A versatile entry into aqueous niobium chemistry: isolation and structure of the intermediate Nb4(μ2-O)2(μ2-OC2H5)4Cl4(OC2H5)4(HOC2H5)4

The reduction of ethanolic solutions of niobium pentachloride with zinc, followed by treatment with aqueous acids serves as a versatile entry into the aqueous solution chemistry of niobium. From the zinc-reduced solution, the major intermediate, Nb₄(μ₂-O)₂(μ₂-OC₂H₅)₄Cl₄(OC₂H₅)₄(HOC₂H₅)₄, was isolated and the crystal structure determined by X-ray crystallography. The complex crystallizes in the orthorhombic space group Pccn, with Z=4, a=21.0105(9), b=11.0387(5), c=19.1389(8), V=4438.9(3) ų, M_r=1090.19,R₁=0.0327 and wR₂=0.0876. The structure revealed a centrosymmetric tetrameric Nb(IV) complex, consisting of a pair of edge-sharing bi-octahedral Nb₂(μ₂-OC₂H₅)₄Cl₂(OC₂H₅)₂(HOC₂H₅)₂ units that are joined by two axial oxo ligands. The Nb-Nb distance of 2.7458(3) Å is consistent with a single metal-metal bond.     

Reaction of [Pt3(μ-CO)3(PBu3)3] with activated olefins and alkynes: the X-ray-structure of [Pt(CO)(PBu3)(CF3CCCF3)]

The reactions of the triangulo-cluster [Pt₃(μ-CO)₃(P^tBu₃)₃] with activated olefins and alkynes have been examined under various conditions. At low temperature, cluster fragmentation occurs yielding the Pt(0) complexes [Pt(CO)(P^tBu₃)(olefin)] (olefin = maleic anhydride and maleimide), while di(tert-butyl)acetylenedicarboxilate reacts quantitatively giving the dinuclear Pt(0) complex [Pt₂(CO)₂(P^tBu₃)₂(μ-η²:η²-^tBuO₂CCCCO₂^tBu)]. At higher temperature and in the presence of alkyne in large excess, the latter dimer converts quantitatively to the monomers [Pt(CO)(P^tBu₃)(alkyne)] (alkyne = CF₃CCCF₃ and ^tBuO₂CCCCO₂^tBu). The stereochemistry of these complexes has been established by NMR and IR measurements. The structure of [Pt(CO)(P^tBu₃)(CF₃CCCF₃)] was confirmed by X-ray diffraction analysis.     

Dithiolate and diselenolate complexes [Pt2(μ-ECH2CHCHCH2E)(PPh3)4] (E = S, Se): Synthesis, characterisation and mass spectrometric formation of the dichalcogenide species [Pt2(μ-E2)(PPh3)4]

The reactions of [Pt₂(μ-E)₂(PPh₃)₄] (E = S, Se) with cis-1,4-dichlorobut-2-ene (cis-ClCH₂CHCHCH₂Cl) give the dichalcogenolate complexes [Pt₂(μ-ECH₂CHCHCH₂E)(PPh₃)₄]²⁺; an X-ray structure determination on the thiolate complex was carried out. The complexes give the expected dications in ESI mass spectra recorded at very low cone voltages, but at moderate cone voltages undergo facile fragmentation via a retro-Diels-Alder reaction and loss of 1,3-butadiene, giving the dichalcogenide species [Pt₂(μ-E₂)(PPh₃)₄]²⁺. Analogous species containing bidentate phosphine or arsine ligands have been previously generated electrochemically, and studied theoretically.     

Heterobimetallic platinum-bismuth aggregates derived from [Pt2(μ-S)2(PPh3)4]

The metalloligand [Pt₂(μ-S)₂(PPh₃)₄] reacts with Bi(S₂CNEt₂)₃ or Bi(S₂COEt)₃ in methanol to produce the orange cationic adducts [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]⁺ and [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂COEt)₂]⁺, respectively, isolated as their hexafluorophosphate salts. An X-ray structure determination on [Pt₂(μ-S)₂(PPh₃)₄Bi(S₂CNEt₂)₂]PF₆ reveals the presence of a six-coordinated bismuth centre with an approximately nido-pentagonal bipyramidal coordination geometry. Fragmentation pathways for both complexes have been probed using electrospray ionisation mass spectrometry; ions [Pt₂(μ-S)₂(PPh₃)₂Bi(S₂CXEt_n)₂]⁺ (X = O, n = 1, X = N, n = 2) are formed by selective loss of two PPh₃ ligands, and at higher cone voltages the species [(Ph₃P)PtS₂Bi]⁺ is observed. Ions formed by loss of CS₂ are also observed for the xanthate but not the dithiocarbamate ions.