Karyokinesis in growing and reverting protoplasts ofSchizosaccharomyces pombe

Division of nuclei without cytokinesis proceeds in growing protoplasts ofSchizosaccharomyces pombe. Prior to regeneration of the complete cell wall and reversion the protoplasts contain 1–7 nuclei, protoplasts with 1–2 nuclei are most frequent. When regeneration of the wall is postponed by adding snail enzymes to the growth medium, protoplasts with a higher number of nuclei (2–4) occur. Multinuclear protoplasts can revert to cells. During the first cytokinesis the protoplast with the regenerated cell wall is divided into two cells by a septum, distribution of nuclei between the two cells being probably incidental. More than only a single nucleus can pass to the revertants even during the second cytokinesis. Septation of protoplasts occurs also during a partial blockage of the wall formation by the snail enzyme preparation, however, reversion to cells can never be observed here (it occurs only after transfer of protoplasts to the medium without the enzyme preparation). The growing and reverting protoplasts represent a very good model system for studying relations among individual processes of the cell cycle, primarily growth of the cell, nuclear cycle and cytokinesis. Yeast protoplasts are often utilized as models for studying morphogenic processes, relations among regeneration of the cell wall, including division of the nucleus (karyokinesis) and cytokinesis.     

Cell Wall Regeneration in Bangia atropurpurea (Rhodophyta) Protoplasts Observed Using a Mannan-Specific Carbohydrate-Binding Module

The cell wall of the red alga Bangia atropurpurea is composed of three unique polysaccharides (β-1,4-mannan, β-1,3-xylan, and porphyran), similar to that in Porphyra. In this study, we visualized β-mannan in the regenerating cell walls of B. atropurpurea protoplasts by using a fusion protein of a carbohydrate-binding module (CBM) and green fluorescent protein (GFP). A mannan-binding family 27 CBM (CBM27) of β-1,4-mannanase (Man5C) from Vibrio sp. strain MA-138 was fused to GFP, and the resultant fusion protein (GFP–CBM27) was expressed in Escherichia coli. Native affinity gel electrophoresis revealed that GFP–CBM27 maintained its binding ability to soluble β-mannans, while normal GFP could not bind to β-mannans. Protoplasts were isolated from the fronds of B. atropurpurea by using three kinds of bacterial enzymes. The GFP–CBM27 was mixed with protoplasts from different growth stages, and the process of cell wall regeneration was observed by fluorescence microscopy. Some protoplasts began to excrete β-mannan at certain areas of their cell surface after 12 h of culture. As the protoplast culture progressed, β-mannans were spread on their entire cell surfaces. The percentages of protoplasts bound to GFP–CBM27 were 3%, 12%, 17%, 29%, and 25% after 12, 24, 36, 48, and 60 h of culture, respectively. Although GFP–CBM27 bound to cells at the initial growth stages, its binding to the mature fronds was not confirmed definitely. This is the first report on the visualization of β-mannan in regenerating algal cell walls by using a fluorescence-labeled CBM.     

Efficient protoplast regeneration ofBacillus thuringiensis andAgrobacterium tumefaciens

Summary Treatment ofBacillus thuringiensis andAgrobacterium tumefaciens taken from the early growth phase (8 h) with lysozyme at 1 mg/ml gave 90–99% protoplast formation and 10–12% protoplast regeneration on the minimal medium in absence of plasma expander (Bovine serum albumin). Enhanced fusion frequency was obtained when protoplasts from 8 h grown cells were used for fusion experiments.     

Culture and regeneration of mesophyll-derived protoplasts of sorghum [Sorghum bicolor (L.) Moench]

 A protocol for plant regeneration from mesophyll/protoplasts of sorghum [Sorghum bicolor (L.) Moench] was developed. The yield of intact protoplasts, their subsequent divisions and regeneration were genotype-dependent. The genotype 296B was always more responsive than IS 32266. For 296B, the sixth leaf from 18-day-old plants kept in dark for 2 days before harvesting was found to be the most suitable source of viable protoplasts. The first division was observed 10–12 days after plating, and the second division after 12–14 days. The maximum plating efficiency was 4.8% in 296 B, followed by 2.48% in IS 32266. Microcolonies were visible after 25–30 days, and microcalli after 60–75 days. Whole plants were obtained after 6–8 weeks of culture of microcalli on MS medium containing 0.2 mg l^–1 kinetin and 2 mg l^–1 BAP. The frequency of regeneration in 296B and IS 32266 was 12.80% and 10.58%, respectively. Ten plants transferred to pots in the glasshouse established well. The seeds collected from glasshouse-grown plants were sown in the field where plants were grown to maturity. Received: 7 October 1998 / Revision received: 13 January 1999 / Accepted: 20 January 1999     

Photosynthetic performance of regenerated protoplasts from disintegrated cells of <Emphasis Type="Italic">Bryopsis hypnoides</Emphasis> (Chlorophyta)

The photosynthetic performances of regenerated protoplasts of Bryopsis hypnoides, which were incubated in seawater for 1, 6, 12, and 24 h, were studied using chlorophyll (Chl) fluorescence and oxygen measurements. Results showed that for the regenerated protoplasts, the pigment content, the ratios of photosynthetic rate to respiration rate, the maximal photosystem II (PSII) quantum yield (F_v/F_m), and the effective PSII quantum yield (Φ_PSII) decreased gradually along with the regeneration progress, indicated that during 24 h of regeneration there was a remarkable reduction in PSII activity of those newly formed protoplasts. We assumed that during the cultivation progress the regenerated protoplasts had different photosynthetic vigor, with only some of them able to germinate and develop into mature thalli. The above results only reflected the photosynthetic features of the regenerated protoplasts at each time point as a whole, rather than the actual photosynthetic activity of individual aggregations. Further investigation suggested a relationship between the size of regenerated protoplasts and their viability. The results showed that the middle-sized group (diameter 20–60 μm) retained the largest number of protoplasts for 24 h of growth. The changes in F_v/F_m and Φ_PSII of the four groups of differently sized protoplasts (i.e. < 20, 20–60, 60–100, and > 100 μm) revealed that the protoplasts 20–60 μm in diameter had the highest potential activity of the photosynthetic light energy absorption and conversion for several hours.     

An efficient method for the preparation of protoplasts fromTrichoderma viride

Conditions for an efficient high-yield procedure for the preparation of protoplasts fromTrichoderma viride have been determined. The optimum yield of protoplasts was obtained using 15–18-h-old unbranched mycelia, 0.7 mol/L KCl in phosphate buffer (pH 6), and 5 % (W/V) of lyophilized snail gut-juice enzyme. The conversion of mycelia to protoplasts was complete within 40–60 min incubation at 30 °C.     

Callus proliferation from leaf protoplasts using phenylurea type cytokinin, 4-PU,inBetula platyphylla VAR.Japonica

Summary Protoplasts were isolated from leaves ofBetula platyphylla var.japonica using a 0.6M mannitol solution containing 1% Cellulase Onozuka R-10 and 1% Driselase. The cell division and colony formation were largely enhanced using Murashige and Skoog (1962) liquid medium at half strength (1/2 MS), containing 0.6M mannitol, 0.09M sucrose, and factorial combinations of 0.1–30 μM N-(2-chloro-4-pyridyl)-N′-phenylurea (4-pu) and 0.1–10 μM 1-naphthaleneacetic acid (NAA) or 0.1–30 μM 2,4-dichlorophenoxyacetic acid (2,4-D). The optimal protoplast density was 5–7 × 10⁴/ml. Continuous callus proliferation from protoplasts was achieved by transferring colonies to fresh 1/2 MS agar medium containing 1 μM NAA and 1 μM 4-pu with no mannitol. It appeared that supplementation of the medium with phenylurea type cytokinin, 4-pu gave the successful callus proliferation from the protoplasts ofB. platyphylla.     

Isolation, culture and regeneration of avocado (Persea americana Mill.) protoplasts

Protoplasts were isolated from embryogenic suspension cultures derived from avocado (Persea americana Mill.) zygotic embryos and nucellus in an enzyme digestion solution consisting of 1% cellulase Onozuka RS, 1% Macerase R10, 0.2% Pectolyase Y-23, 0.7 M mannitol. 24.5 mM CaCl₂, 0.92 mM NaH₂PO₄ and 6.25 2-[N-morpholino]ethanesulfonic acid (1.5 ml) mixed with 0.7 M MS^–8P (2.5 ml). MS^-8P medium consisted of Murashige and Skoog salts without NH₄NO₃, 1 mg l^–1 thiamine HCl, 100 mg l^–1 myo-inositol, 3.1 g l^–1 glutamine and 8P organic addenda. Medium osmolarity was adjusted with 0.15 M sucrose and 0–0.55 M mannitol. Protoplast yields of 3.5×10⁶ protoplasts g^–1 were obtained. Growth and development of the protoplasts were significantly affected by osmolarity, nitrogen source, plating density and culture medium dilution. Under optimum conditions, proembryos developed directly from embryogenic protoplasts and subsequently into somatic embryos. Optimum conditions for somatic embryo development included the culture of protoplasts at a density of 0.8–1.6×10⁵ ml^–1 in 0.4 M MS^–8P for 2–3 weeks, followed by subculture in 0.15 M MS^–8P at a diluted density of 20–40× for 1 month in darkness to obtain somatic embryos. Mature somatic embryos were recovered on semisolid medium; however, a low frequency of plantlet recovery (≤1%) from protoplast-derived somatic embryos was observed. Received: 9 February 1998 / Revision received: 4 May 1998 / Accepted: 15 May 1998     

Efficient isolation, culture and regeneration of Lotus corniculatus protoplasts

This paper reports an improved protocol for isolation, culture and regeneration of Lotus corniculatus protoplasts. A range of parameters which influence the isolation of L. corniculatus protoplasts were investigated, i.e., enzyme combination, tissue type, incubation period and osmolarity level. Of three enzyme combinations tested, the highest yield of viable protoplasts was achieved with the combination of 2% Cellulase Onozuka RS, 1% Macerozyme R-10, 0.5% Driselase and 0.2% Pectolyase. The use of etiolated cotyledon tissue as a source for protoplast isolation proved vital in obtaining substantially higher protoplast yields than previously reported. Culture of the protoplasts on a nitrocellulose membrane with a Lolium perenne feeder-layer on the sequential series of PEL medium was highly successful in the formation of micro-colonies with plating efficiencies 3–10 times greater than previous studies. Shoot regeneration and intact plants were achieved from 46% of protoplast-derived cell colonies.     

Comparison of cell wall regeneration on maize protoplasts isolated from leaf tissue and suspension cultured cells

Summary The cell wall regeneration on protoplasts derived from maize mesophyll cells was compared with wall regeneration on protoplasts derived from suspension cultured cells using light microscopy, transmission electron microscopy, and mass spectrometry. The time course of cell wall regeneration has shown that the mesophyll protoplasts regenerated walls much slower than the protoplasts derived from cultured cells. Moreover, cell wall materials on the mesophyll protoplasts were often unevenly distributed. Electron microscopy has further demonstrated that the mesophyll protoplasts have less organized and compact walls than the protoplasts from cultured cells. Chemical analysis revealed that the mesophyll protoplasts had a lower ratio ofβ-(1–3)-glucan toβ-(1–4)-glucan than protoplasts from cultured cells. The significance of these results for the viability and development of protoplasts in culture is discussed. National Research Council of Canada paper no. 32458.     

Plant regeneration from leaf protoplasts of evening primrose (Oenothera hookeri)

A protocol is presented for regenerating plants from leaf protoplasts of Oenothera. The method uses (1) embedding of isolated protoplasts at high cell densities in thin alginate layers, (2) initial culture in B5 medium containing 3 mg l^–1 α-naphthaleneacetic acid (NAA) and 1 mg l^-1 6-benzylaminopurine (BAP), (3) reduction of the osmotic pressure of the culture medium at early stages of culture and (4) plating of microcolonies recovered from the alginate onto solid B5 medium with 3 mg l^–1 NAA and 1 mg l^–1 BAP. The shortest time required from protoplast isolation to the appearance of shoot initials was 7 weeks. The efficiency of the procedure for protoplast to cell line formation is high (about 80%). Received: 17 February 1997 / Revision received: 6 November 1997 / Accepted: 15 November 1997     

Inhibition of the cell wall regeneration and reversion in protoplasts ofRhizopus nigricans

During cultivation in a nutrient medium with snail gastric juice the protoplasts ofRhizopus nigricans produce an incomplete cell wall and grow. A true growth, associated with nuclear division, is involved. Morphology of growth of the formations is determined by the structure of the incomplete cell wall. When the incomplete wall is formed by a thin fibrillar net the growing formation assumes the physically optimal shape—i.e. a sphere; when the net is dense polar growth predominates. The degree of construction of the new wall depends on the activity of snail gastric juice enzymes which decreases during the cultivation. When fresh snail enzymes were added at certain intervals, only a fine fibrillar net was formed on the surface of growing protoplasts. The formations grew for up to 8 d under these conditions, reached several hundred μm in size and the number of nuclei increased up to 80-fold. When the blocking of the wall synthesis was interrupted, a complete cell wall regenerated on the surface of these giant formations and a reversion to hyphae was observed. The incomplete cell wall functions as a passive morphogenetic factor: It can influence the morphology of the growing protoplasts but it cannot induce reversion to hyphase and secure the permanent existence of these structures.     

Kinetics of β-glucan and chitin formation by cells and protoplasts of the yeastSaccharomyces cerevisiae

Intact cells and protoplasts of the yeastSaccharomyces cerevisiae were grown in liquid medium with radioactive glucose as the sole carbon source, and the kinetics of radioactivity incorporation into β-glucan and chitin fractions were measured and compared. While the synthesis of β-glucan by protoplasts started early after their being suspended in the growth medium, the onset of chitin formation was delayed about 3 h and, unlike β-glucan, its formation depended on synthesis of undisturbed protein. In the intact cells, the ratio of β-glucan to chitin was constantly around 12 during growth; while in protoplasts this ratio steadily decreased in the course of cultivation and reached the value of 1.1 after 16h, which can be ascribed to the higher rate of chitin formation by protoplasts in comparison with normal cells. The deproteinized polysaccharide nets formed on the surface of protoplasts that had been incubated in the presence and in the absence of cycloheximide did not differ substantially in their morphology. The only observed difference was the presence of granular material in the samples from control protoplasts grown in the absence of cycloheximide.     

Regeneration and analysis of interspecific asymmetric potato –Solanum ssp hybrid plants selected by micromanipulation or fluorescence-activated cell sorting (FACS)

 Recipient protoplasts from three Solanum tuberosum genotypes, cv ‘Folva’ (2n=4x=48), cv ‘Matilda’ (4n) and ‘161 : 14’ (2n), were electrofused with X-ray-irradiated donor protoplasts from two wild species S. spegazzinii (2n) or S. microdontum×S. vernei (2n). Prior to fusion, protoplasts were fluorescence-labelled with either fluorescein diacetate or scopoletin. Fusion products were identified by dual fluorescence and selected by micromanipulation or fluorescence-activated cell sorting (FACS). All putative hybrid plants were analysed by the random amplified polymorphic DNA (RAPD) technique. Our analysis demonstrates that each asymmetric hybrid plant has an individual and stable profile of donor-specific RAPD bands. The irradiation of donor protoplasts hampered the growth of selected heterofusion products in a dose-dependent way. Irradiation resulted in donor chromosome elimination, but not in a dose dependent way, in the tested interval. In asymmetric hybrids with the S. spegazzinii donor 33–68% of the donor-specific RAPD bands were missing, indicating a similar level of chromosome elimination. In asymmetric hybrid plants with the S. microdontum×S. vernei donor 74–95% of the donor RAPD bands were missing. Chromosome countings revealed that these hybrids had chromosome numbers equal to or below the chromosome numbers found in the tetraploid recipients. This is the first time that highly asymmetric hybrid plants between two tetraploid potato recipients and the donor S. microdontum×S. vernei have been obtained. Received : 16 December 1996 / Accepted: 21 February 1997     

Plant regeneration from mesophyll protoplasts of a medicinal plant, Phellodendron amurense rupr.

Summary A regeneration system from protoplast to plantlet for a medicinal plant species, Phellodendron amurense Rupr., has been developed. Leaves of micropropagated shoots or plantlets were selected as plant materials for protoplast isolation. The yield and viability of leaf protoplasts were greatly influenced by enzyme combination, treatment time and osmoticum. The highest viability (86%) with a yield of 7.1×10⁵ protoplasts per gram fresh weight was obtained with a 6-h digestion in 1% Cellulase Onozuka R-10 plus 1% Driselase-20. Sustained cell division and colony formation from the protoplasts were best supported at a plating density of 4×10⁵−6×10⁵ protoplasts per milliliter using a 0.2% gellan gum-solidified or liquid MS (Murashige and Skoog, 1962) medium containing 0.6M mannitol, 2.0μM 6-benzylaminopurine (BA) with 4.0 μM α-naphthaleneacetic acid (NAA), indole-3-butyric acid (IBA), or 2,4-dichlorophenoxyacetic acid (2,4-D). The protoplast-derived colonies formed green compact calluses when transferred to a solidified MS medium containing 2.0 μM BA with 4.0μM NAA of IBA. Shoot regeneration from protoplast-derived calluses was induced on MS medium supplemented with 2.0 μM BA and 1.0μM NAA or 2.5μM IBA. Shoot multiplication and elongation occurred on MS medium containing 1.0μM BA. In vitro-grown shoots were rooted on MS medium with either 0.5–4.0μM IBA or NAA. Regenerants were transferred to the Kanuma soil and successfully established under greenhouse conditions.     

Preparation of protoplasts and regeneration of intact cells ofStreptomyces cinnamonensis

Protoplasts were prepared and intact cells were regenerated inStreptomyces cinnamonensis— a monensin producer— to make genetic manipulations with this strain possible. 70–80% of protoplasts were formed and up to 90% of them could regenerate into intact cells.     

Induction of fast-growing and morphologically different strains through intergeneric protoplast fusions of Ulva and Enteromorpha (Ulvales,Chlorophyta)

Isolated protoplasts of Ulva pertusa and Enteromorpha prolifera were electrically fused. Treatment of protoplasts in 1% protease for 15–20 min prior to fusion enhanced fusion ability. Protoplasts from each fusion partner were mixed together in 1:1 ratio in low conductivity electrofusion solution at a density of 1 × 10⁵ cells ml⁻¹ before subjecting them to electrofusion. The protoplasts were aligned in AC field (1MHz, 25 V for 10–15 s) and subsequently fused by a high intensity single DC pulse of 250 V for 25 μs duration. Fusion buffer supplemented with 1 mM calcium and 1 mM magnesium yielded optimum fusion frequencies (about 18–24%). Entrapment of fusion treated cells inside agarose/agar plate facilitated marking and regeneration of fusion products. The regeneration patterns of fused protoplasts were similar to normal (unfused) protoplast development. Most of the regenerated plants from fusion products had a thallus similar to either U. pertusa type or E. prolifera type. Although some of the plants of the former were morphologically similar to U. pertusa, but most had a higher growth rate (1.9 to 1.5 times) than U. pertusa. Furthermore the thallus of some plants had a characteristic irregular and dentate margin, which was never observed in the parental type.     

Brassinolide affects the rate of cell division in isolated leaf protoplasts of Petunia hybrida

Brassinosteroids are known to promote cell elongation in a wide range of plant species but their effect on cell division has not been as extensively studied. We examined the effect of brassinolide on the kinetics and final division frequencies of regenerating leaf mesophyll protoplasts of Petunia hybrida Vilm v. Comanche. Under optimal auxin and cytokinin conditions, 10–100 nM brassinolide accelerated the time of first cell division by 12 h but had little effect on the final division frequencies after 72–120 h of culture. One micromolar brassinolide showed the same acceleration of first cell division but inhibited the final division frequency by approximately 20%. Under sub-optimal auxin conditions, 10–100 nM brassinolide both accelerated the time of first cell division and dramatically increased the 72- to 120-h final division frequencies. Isolated protoplasts may provide a useful model system to investigate the molecular mechanisms of brassinosteroid action on cell proliferation. Received: 1 December 1997 / Revision received: 13 February 1998 / Accepted: 24 April 1998     

An alginate-layer technique for culture of Brassica oleracea L. protoplasts

Ten accessions belonging to the Brassica oleracea subspecies alba and rubra, and to B. oleracea var. sabauda were used in this study. Protoplasts were isolated from leaves and hypocotyls of in vitro grown plants. The influence of selected factors on the yield, viability, and mitotic activity of protoplasts immobilized in calcium alginate layers was investigated. The efficiency of protoplast isolation from hypocotyls was lower (0.7 ± 0.1 × 10⁶ ml⁻¹) than for protoplasts isolated from leaf mesophyll tissue (2 ± 0.1 × 10⁶ ml⁻¹). High (70–90%) viabilities of immobilized protoplasts were recorded, independent of the explant sources. The highest proportion of protoplasts undergoing divisions was noted for cv. Reball F1, both from mesophyll (29.8 ± 2.2%) and hypocotyl (17.5 ± 0.3%) tissues. Developed colonies of callus tissue were subjected to regeneration and as a result plants from six accessions were obtained.