The PhoQ histidine kinases of Salmonella and Pseudomonas spp. are structurally and functionally different: evidence that pH and antimicrobial peptide sensing contribute to mammalian pathogenesis

The PhoQ sensor kinase is essential for Salmonella typhimurium virulence for animals, and a homologue exists in the environmental organism and opportunistic pathogen Pseudomonas aeruginosa. S. typhimurium PhoQ (ST-PhoQ) is repressed by millimolar concentrations of divalent cations and activated by antimicrobial peptides and at acidic pH. ST-PhoQ has a periplasmic Per-ARNT-Sim domain, a fold commonly employed for ligand binding. However, substrate binding is instead accomplished by an acidic patch in the periplasmic domain that interacts with the inner membrane through divalent cation bridges. The DNA sequence encoding this acidic patch is absent from Pseudomonas phoQ (PA-PhoQ). Here, we demonstrate that PA-PhoQ binds and is repressed by divalent cations, and can functionally complement a S. typhimurium phoQ-null mutant. Mutational analysis and NMR spectroscopy of the periplasmic domains of ST-PhoQ and PA-PhoQ indicate distinct mechanisms of binding divalent cation. The data are consistent with PA-PhoQ binding metal in a specific ligand-binding pocket. PA-PhoQ was partially activated by acidic pH but not by antimicrobial peptides. S. typhimurium expressing PA-PhoQ protein were attenuated for virulence in a mouse model, suggesting that the ability of Salmonella to sense host environments via antimicrobial peptides and acidic pH is an important contribution to pathogenesis.     

Metal bridges between the PhoQ sensor domain and the membrane regulate transmembrane signaling

Bacterial histidine kinases respond to environmental stimuli by transducing a signal from an extracytosolic sensor domain to a cytosolic catalytic domain. Among them, PhoQ promotes bacterial virulence and is tightly repressed by the divalent cations such as calcium and magnesium. We have determined the crystal structure of the PhoQ sensor domain from Salmonella typhimurium in the Ca2+-bound state, which reveals a highly negatively charged surface that is in close proximity to the inner membrane. This acidic surface binds at least three Ca2+, which mediate the PhoQ-membrane interaction. Mutagenesis analysis indicates that structural integrity at the membrane proximal region of the PhoQ sensor domain promotes metal-mediated repression. We propose that depletion or displacement of divalent cations leads to charge repulsion between PhoQ and the membrane, which initiates transmembrane signaling through a change in orientation between the PhoQ sensor domain and membrane. Therefore, both PhoQ and the membrane are required for extracytosolic sensing and transmembrane signaling.     

Comparison of the Pseudomonas aeruginosa and Escherichia coli PhoQ sensor domains: evidence for distinct mechanisms of signal detection

The PhoP-PhoQ two-component system is present in a number of Gram-negative bacteria where it has roles in Mg(2+) homeostasis and virulence. PhoQ is a transmembrane histidine kinase that activates PhoP-mediated regulation of a set of genes when the extracellular concentration of divalent cations is low. Divalent cations are thought to interact directly with the periplasmic PhoQ sensor domain. The PhoP-PhoQ systems of Escherichia coli and Pseudomonas aeruginosa are similar in their biological response to extracellular divalent cations; however, their sensor domains display little sequence identity. Here we have begun to explore the consequences of this sequence divergence by comparing the biophysical properties of the P. aeruginosa PhoQ sensor domain with the corresponding E. coli sensor domain. Unlike the E. coli protein, the P. aeruginosa PhoQ sensor domain undergoes changes in the circular dichroism and fluorescence spectra as well as destabilization of its dimeric form in response to divalent cations. These results suggest that distinct mechanisms of signal detection are utilized by these proteins. A hybrid protein in which the E. coli sensor domain has been substituted with the corresponding P. aeruginosa sensor domain responds normally to the presence of extracellular divalent cations in vivo in E. coli. Thus, despite apparent differences in the structural response to its stimulus, the P. aeruginosa sensor domain transduces signals to the E. coli PhoQ cytoplasmic kinase domain in a manner that mimics normal E. coli PhoQ function.     

The connector SafA interacts with the multi-sensing domain of PhoQ in Escherichia coli

Sensor histidine kinases of two-component signal transduction systems (TCSs) respond to various environmental signals and transduce the external stimuli across the cell membrane to their cognate response regulators. Recently, membrane proteins that modulate sensory systems have been discovered. Among such proteins is SafA, which activates the PhoQ/PhoP TCS by direct interaction with the sensor PhoQ. SafA is directly induced by the EvgS/EvgA TCS, thus connecting the two TCSs, EvgS/EvgA and PhoQ/PhoP. We investigated how SafA interacted with PhoQ. Bacterial two-hybrid and reporter assays revealed that the C-terminal region (41-65 aa) of SafA activated PhoQ at the periplasm. Adding synthetic SafA(41-65) peptide to the cell culture also activated PhoQ/PhoP. Furthermore, direct interaction between SafA(41-65) and the sensor domain of PhoQ was observed by means of surface plasmon resonance. NMR spectroscopy of (15) N-labelled PhoQ sensor domain confirmed that SafA and Mg(2+) provoked a different conformational change of PhoQ. Site-directed mutagenesis studies revealed that R53, within SafA(41-65), was important for the activation of PhoQ, and D179 of the PhoQ sensor domain was required for its activation by SafA. SafA activated PhoQ by a different mechanism from cationic antimicrobial peptides and acidic pH, and independent of divalent cations and MgrB.     

Determination of the physiological dimer interface of the PhoQ sensor domain

PhoQ is the transmembrane sensor kinase of the phoPQ two-component system, which detects and responds to divalent cations and antimicrobial peptides and can trigger bacterial virulence. Despite their ubiquity and importance in bacterial signaling, the structure and molecular mechanism of the sensor kinases is not fully understood. Frequently, signals are transmitted from a periplasmic domain in these proteins to the cytoplasmic kinase domains via an extended dimeric interface, and the PhoQ protein would appear to follow this paradigm. However, the isolated truncated periplasmic domain of PhoQ dimerizes poorly, so it has been difficult to distinguish the relevant interface in crystal structures of the PhoQ periplasmic domain. Thus, to determine the arrangement of the periplasmic domains of Escherichia coli PhoQ in the physiological homodimer, disulfide-scanning mutagenesis was used. Single cysteine substitutions were introduced along the N-terminal helix of the periplasmic region, and the degree of cross-linking in each protein variant was determined by Western blotting and immunodetection. The results were subjected to periodicity analysis to generate a profile that provides information concerning the C^β distances between corresponding residues at the interface. This profile, together with a rigid-body search procedure, side-chain placement, and energy minimization, was used to build a model of the dimer arrangement. The final model proved to be highly compatible with one of the PhoQ crystal structures, 3BQ8, indicating that 3BQ8 is representative of the physiological arrangement. The model of the periplasmic region is also compatible with a full-length PhoQ protein in which a four-helix bundle forms in the membrane. The membrane four-helix bundle has been proposed for other sensor kinases and is thought to have a role in the mechanism of signal transduction; our model supports the idea that signaling through a membrane four-helix bundle is a widespread mechanism in the transmembrane sensor kinases.     

Mutational analysis of the Escherichia coli PhoQ sensor kinase: differences with the Salmonella enterica serovar Typhimurium PhoQ protein and in the mechanism of Mg2+ and Ca2+ sensing

The PhoP-PhoQ two-component system plays a role in Mg2+ homeostasis and/or the virulence properties of a number of bacterial species. A Salmonella enterica serovar Typhimurium PhoQ sensor kinase mutant, in which the threonine at residue 48 in the periplasmic sensor domain is changed to an isoleucine, was shown previously to result in elevated expression of PhoP-activated genes and to affect mouse virulence, epithelial cell invasion, and sensitivity to macrophage killing. We characterized a complete set of proteins having amino acid substitutions at position 48 in the closely related Escherichia coli PhoQ protein. Numerous mutant proteins having amino acid substitutions with side chains of various sizes and characters displayed signaling phenotypes similar to that of the wild-type protein, indicating that interactions mediated by the wild-type threonine side chain are not required for normal protein function. Changes to amino acids with aromatic side chains had little impact on signaling in response to extracellular Mg2+ but resulted in reduced sensitivity to extracellular Ca2+, suggesting that the mechanisms of signal transduction in response to these two divalent cations are different. Surprisingly, the Ile48 protein displayed a defective phenotype rather than the hyperactive phenotype seen with the S. enterica serovar Typhimurium protein. We also describe a mutant PhoQ protein lacking the extracellular sensor domain with a defect in the ability to activate PhoP. The defect does not appear to be due to reduced autokinase activity but rather appears to be due to an effect on the stability of the aspartyl-phosphate bond of phospho-PhoP.     

Temperature and Mg2+ sensing by a novel PhoP-PhoQ two-component system for regulation of virulence in Edwardsiella tarda

The PhoP-PhoQ two-component system is commonly used by bacteria to sense environmental factors. Here we show that the PhoP-PhoQ system of Edwardsiella tarda detects changes in environmental temperature and Mg(2+) concentration as well as regulates the type III and VI secretion systems through direct activation of esrB. Protein secretion is activated from 23 to 35 °C or at low Mg(2+) concentrations, but it is suppressed at or below 20 °C, at or above 37 °C, or at high Mg(2+) concentrations. The effects of temperature and Mg(2+) concentration are additive. The PhoQ sensor domain has a low T(m) of 37.9 °C, and it detects temperatures through a conformational change of its secondary structure. Mutation of specific Pro or Thr residues increased the stability of the PhoQ sensor drastically, altering its temperature-sensing ability. The PhoQ sensor detects Mg(2+) concentration through the direct binding of Mg(2+) to a cluster of acidic residues (DDDSAD) and through changes that likely affect its tertiary structure. Here, we describe for the first time the use of PhoP-PhoQ as a temperature sensor for bacterial virulence control.     

A two-alpha-helix extra domain mediates the halophilic character of a plant-type ferredoxin from halophilic archaea

The [2Fe-2S] ferredoxin (HsFdx) of the halophilic archaeon Halobacterium salinarum exhibits a high degree of sequence conservation with plant-type ferredoxins except for an insertion of 30 amino acids near its N-terminus which is extremely rich in acidic amino acids. Unfolding studies reveal that HsFdx has an unfolding temperature of approximately 85 degrees C in 4.3 M NaCl, but of only 50 degrees C in low salinity, revealing its halophilic character. The three-dimensional structure of HsFdx was determined by NMR spectroscopy, resulting in a backbone rmsd of 0.6 A for the diamagnetic regions of the protein. Whereas the overall structure of HsFdx is very similar to that of the plant-type ferredoxins, two additional alpha-helices are found in the acidic extra domain. (15)N NMR relaxation studies indicate that HsFdx is rigid, and the flexibility of residues is similar throughout the molecule. Monitoring protein denaturation by NMR did not reveal differences between the core fold and the acidic domain, suggesting a cooperative unfolding of both parts of the molecule. A mutant of the HsFdx in which the acidic domain is replaced with a short loop of the nonhalophilic Anabaena ferredoxin shows a considerably changed expression pattern. The halophilic wild-type protein is readily expressed in large amounts in H. salinarum, but not in Escherichia coli, whereas the mutant ferredoxin could only be overexpressed in E. coli. The salt concentration was also found to play a critical role for the efficiency of cluster reconstitution: the cluster of HsFdx could be reconstituted only in a solution containing molar concentrations of NaCl, while the reconstitution of the cluster in the mutant protein proceeds efficiently in low salt. These findings suggest that the acidic domain mediates the halophilic character which is reflected in its thermostability, the exclusive expression in H. salinarum, and the ability to efficiently reconstitute the iron-sulfur cluster only at high salt concentrations.     

Refined crystallographic structure of Pseudomonas aeruginosa exotoxin A and its implications for the molecular mechanism of toxicity.

Exotoxin A of Pseudomonas aeruginosa asserts its cellular toxicity through ADP-ribosylation of translation elongation factor 2, predicated on binding to specific cell surface receptors and intracellular trafficking via a complex pathway that ultimately results in translocation of an enzymatic activity into the cytoplasm. In early work, the crystallographic structure of exotoxin A was determined to 3.0 A resolution, revealing a tertiary fold having three distinct structural domains; subsequent work has shown that the domains are individually responsible for the receptor binding (domain I), transmembrane targeting (domain II), and ADP-ribosyl transferase (domain III) activities, respectively. Here, we report the structures of wild-type and W281A mutant toxin proteins at pH 8.0, refined with data to 1.62 A and 1.45 A resolution, respectively. The refined models clarify several ionic interactions within structural domains I and II that may modulate an obligatory conformational change that is induced by low pH. Proteolytic cleavage by furin is also obligatory for toxicity; the W281A mutant protein is substantially more susceptible to cleavage than the wild-type toxin. The tertiary structures of the furin cleavage sites of the wild-type and W281 mutant toxins are similar; however, the mutant toxin has significantly higher B-factors around the cleavage site, suggesting that the greater susceptibility to furin cleavage is due to increased local disorder/flexibility at the site, rather than to differences in static tertiary structure. Comparison of the refined structures of full-length toxin, which lacks ADP-ribosyl transferase activity, to that of the enzymatic domain alone reveals a salt bridge between Arg467 of the catalytic domain and Glu348 of domain II that restrains the substrate binding cleft in a conformation that precludes NAD+ binding. The refined structures of exotoxin A provide precise models for the design and interpretation of further studies of the mechanism of intoxication.     

Identification of an internal cavity in the PhoQ sensor domain for PhoQ activity and SafA-mediated control

The PhoQ/PhoP two-component signal transduction system is conserved in various Gram-negative bacteria and is often involved in the expression of virulence in pathogens. The small inner membrane protein SafA activates PhoQ in Escherichia coli independently from other known signals that control PhoQ activity. We have previously shown that SafA directly interacts with the sensor domain of the periplasmic region of PhoQ (PhoQ-SD) for activation, and that a D179R mutation in PhoQ-SD attenuates PhoQ activation by SafA. In this study, structural comparison of wild-type PhoQ-SD and D179R revealed a difference in the cavity (SD (sensory domain) pocket) found in the central core of this domain. This was the only structural difference between the two proteins. Site-directed mutagenesis of the residues surrounding the SD pocket has supported the SD pocket as a site involved in PhoQ activity. Furthermore, the SD pocket has also been shown to be involved in SafA-mediated PhoQ control.     

Characterization of the catalytic activities of the PhoQ histidine protein kinase of Salmonella enterica serovar Typhimurium

Studies of Escherichia coli membranes that were highly enriched in the Salmonella enterica serovar Typhimurium PhoQ protein showed that the presence of ATP and divalent cations such as Mg2+, Mn2+, Ca2+, or Ba2+ resulted in PhoQ autophosphorylation. However, when Mg2) or Mn2+ was present at concentrations higher than 0.1 mM, the kinetics of PhoQ autophosphorylation were strongly biphasic, with a rapid autophosphorylation phase followed by a slower dephosphorylation phase. A fusion protein lacking the sensory and transmembrane domains retained the autokinase activity but could not be dephosphosphorylated when Mg2+ or Mn2+ was present at high concentrations. The instability of purified [32P]phospho-PhoP in the presence of PhoQ-containing membranes indicated that PhoQ also possesses a phosphatase activity. The PhoQ phosphatase activity was stimulated by increasing the Mg2+ concentration. These data are consistent with a model in which Mg2+ binding to the sensory domain of PhoQ coordinately regulates autokinase and phosphatase activities.     

Calreticulin is a thermostable protein with distinct structural responses to different divalent cation environments

Calreticulin is a soluble calcium-binding chaperone of the endoplasmic reticulum (ER) that is also detected on the cell surface and in the cytosol. Calreticulin contains a single high affinity calcium-binding site within a globular domain and multiple low affinity sites within a C-terminal acidic region. We show that the secondary structure of calreticulin is remarkably thermostable at a given calcium concentration. Rather than corresponding to complete unfolding events, heat-induced structural transitions observed for calreticulin relate to tertiary structural changes that expose hydrophobic residues and reduce protein rigidity. The thermostability and the overall secondary structure content of calreticulin are impacted by the divalent cation environment, with the ER range of calcium concentrations enhancing stability, and calcium-depleting or high calcium environments reducing stability. Furthermore, magnesium competes with calcium for binding to calreticulin and reduces thermostability. The acidic domain of calreticulin is an important mediator of calcium-dependent changes in secondary structure content and thermostability. Together, these studies indicate interactions between the globular and acidic domains of calreticulin that are impacted by divalent cations. These interactions influence the structure and stability of calreticulin, and are likely to determine the multiple functional activities of calreticulin in different subcellular environments.     

Mutations in the ribonuclease H active site of HIV-RT reveal a role for this site in stabilizing enzyme-primer-template binding

The RNase H activity of HIV-RT is coordinated by a catalytic triad (E478, D443, D498) of acidic residues that bind divalent cations. We examined the effect of RNase H deficient E(478)-->Q and D(549)-->N mutations that do not alter polymerase activity on binding of enzyme to various nucleic acid substrates. Binding of the mutant and wild-type enzymes to various nucleic acid substrates was examined by determining dissociation rate constants (k(off)) by titrating both Mg(2+) and salt concentrations. In agreement with the unaltered polymerase activity of the mutant, the k(off) values for the wild-type and mutant enzymes were essentially identical using DNA-DNA templates in the presence of 6 mM Mg(2+). However, with lower concentrations of Mg(2+) and in the absence of Mg(2+), although both enzymes dissociated more rapidly, the mutant enzymes dissociated several-fold more slowly than the wild type. This was also observed on RNA-DNA templates. These results indicate that alterations in residues essential for Mg(2+) binding have a pronounced positive effect on enzyme-template stability and that the negative residues in the RNase H region of the enzyme have a negative influence on binding in the absence of Mg(2+). In this regard RT is similar to other nucleic acid cleaving enzymes that show enhanced binding upon mutation of active site residues.     

Crystal structure of Escherichia coli UvrB C-terminal domain, and a model for UvrB-uvrC interaction

A crystal structure of the C-terminal domain of Escherichia coli UvrB (UvrB') has been solved to 3.0 A resolution. The domain adopts a helix-loop-helix fold which is stabilised by the packing of hydrophobic side-chains between helices. From the UvrB' fold, a model for a domain of UvrC (UvrC') that has high sequence homology with UvrB' has been made. In the crystal, a dimerisation of UvrB domains is seen involving specific hydrophobic and salt bridge interactions between residues in and close to the loop region of the domain. It is proposed that a homologous mode of interaction may occur between UvrB and UvrC. This interaction is likely to be flexible, potentially spanning > 50 A.     

Functional significance of Glu-77 and Tyr-137 within the active site of isoaspartyl dipeptidase

Isoaspartyl dipeptidase (IAD) is a binuclear metalloenzyme and a member of the amidohydrolase superfamily. This enzyme catalyzes the hydrolytic cleavage of beta-aspartyl dipeptides. The pH-rate profiles for the hydrolysis of beta-Asp-Leu indicates that catalysis is dependent on the ionization of two groups; one that ionizes at a pH approximately 6 and the other approximately 9. The group that must be ionized for catalysis is directly dependent on the identity of the metal ion bound to the active site. This result is consistent with the ionization of the hydroxide that bridges the two divalent cations. In addition to the residues that interact directly with the divalent cations there are two other residues that are highly conserved and found within the active site: Glu-77 and Tyr-137. Mutation of Tyr-137 to phenylalanine reduced the rate of catalysis by three orders of magnitude. The three dimensional X-ray structure of the Y137F mutant did not show any significant conformation changes relative to the three dimensional structure of the wild-type enzyme. The positioning of the side-chain phenolic group of Tyr-137 in the active site of IAD is consistent with the stabilization of the tetrahedral adduct concomitant with nucleophilic attack by the hydroxide that bridges the two divalent cations. Mutation of Glu-77 resulted in the reduction of catalytic activity by five orders of magnitude. The three dimensional structure of the E77Q mutant did not show any significant conformational changes in the mutant relative to the three dimensional structure of the wild-type enzyme. The positioning of the side-chain carboxylate of Glu-77 is consistent with the formation of an ion pair interaction with the free alpha-amino group of the substrate.