"Golden blot"--detection of polyclonal and monoclonal antibodies bound to antigens on nitrocellulose by protein A-gold complexes

Protein A bound to particles of colloidal gold is widely used for cytochemical localization of antigens. A method for detecting immune complexes on "Western blots" with protein A-gold has been developed. It involved the following steps: (i) electrophoretic separation of proteins, (ii) transfer to nitrocellulose, (iii) incubation with antibodies, and (iv) staining with protein A-gold. The amount of antigen detectable was 10-50 ng. The sensitivity could be improved by subsequent photochemical silver staining (1-10 ng detected), and was then comparable to autoradiograms using iodinated protein A.     

A highly sensitive technique for staining DNA and RNA in polyacrylamide gels using silver

A technique is described for staining DNA in polyacrylamide gels with silver. It is rapid, requiring about 30 min for whole staining and development procedure, very simple and at least 20 times more sensitive than ethidium bromide for the staining of double-stranded DNA in polyacrylamide gels. This technique can also be applied for the staining of denatured, single-stranded DNA as well as RNA after their electrophoretic separation on polyacrylamide gels, having the same sensitivity as for double-stranded DNA fragments.     

Tricine-SDS-PAGE

Tricine-SDS-PAGE is commonly used to separate proteins in the mass range 1-100 kDa. It is the preferred electrophoretic system for the resolution of proteins smaller than 30 kDa. The concentrations of acrylamide used in the gels are lower than in other electrophoretic systems. These lower concentrations facilitate electroblotting, which is particularly crucial for hydrophobic proteins. Tricine-SDS-PAGE is also used preferentially for doubled SDS-PAGE (dSDS-PAGE), a proteomic tool used to isolate extremely hydrophobic proteins for mass spectrometric identification, and it offers advantages for resolution of the second dimension after blue-native PAGE (BN-PAGE) and clear-native PAGE (CN-PAGE). Here I describe a protocol for Tricine-SDS-PAGE, which includes efficient methods for Coomassie blue or silver staining and electroblotting, thereby increasing the versatility of the approach. This protocol can be completed in 1-2 d.     

Sensitive colloidal metal (gold or silver) staining of protein blots on nitrocellulose membranes

A sensitive staining method for protein blots on nitrocellulose membranes is described and compared with commonly used dye staining methods. It uses colloidal metal sols (gold or silver) stabilized with Tween 20 and adjusted to pH 3. It is based on the selective high-affinity binding of colloidal metal particles to the proteins and produces a red-purplish color (gold) or dark grey (silver). The sensitivity of this new staining method is in the same range as silver staining of polyacrylamide gels and matches the sensitivity of overlay assays. It will therefore be a useful tool for correlating the position of bands or spots of proteins detected with overlay assays with the complete electropherogram in a duplicate protein blot.     

Influence of the protein staining in the fast ultrasonic sample treatment for protein identification through peptide mass fingerprint and matrix-assisted laser desorption ionization time of flight mass spectrometry

The influence of the protein staining used to visualize protein bands, after in-gel protein separation, for the correct identification of proteins by peptide mass fingerprint (PMF) after application of the ultrasonic in-gel protein protocol was studied. Coomassie brilliant blue and silver nitrate, both visible stains, and the fluorescent dyes Sypro Red and Sypro Orange were evaluated. Results obtained after comparison with the overnight in-gel protocol showed that good results, in terms of protein sequence coverage and number of peptides matched, can be obtained with anyone of the four stains studied. Two minutes of enzymatic digestion time was enough for proteins stained with coomassie blue, while 4 min was necessary when silver or Sypro stainings were employed in order to reach equivalent results to those obtained for the overnigh in-gel protein protocol. For the silver nitrate stain, the concentration of silver present in the staining solution must be 0.09% (w/v) to minimize background in the MALDI mass spectra.     

A sensitive staining method for detecting acidic polysaccharides in cellulose acetate and agarose gels

A sensitive staining method has been developed for the detection of acidic polysaccharides in cellulose acetate and agarose gels. The method is based on the precipitation of bovine serum albumin by acidic polysaccharides at acidic pH values and the subsequent staining of precipitated protein with amido black or Coomassie brilliant blue R-250 stains. The detection limit of acidic polysaccharides is 15-40 ng on cellulose acetate strips and 50-150 ng on agarose plates. The sensitivity of the described staining technique is of the same order for a wide range of acidic polysaccharides of different origin in contrast to Alcian blue and toluidine blue stains, which detect only mucopolysaccharides of animal origin at comparable levels. The method was also applied to the colorimetric quantitative determination of acidic polysaccharides after electrophoretic separation.     

A mechanically strong matrix for protein electrophoresis with enhanced silver staining properties.

Duracryl is a mechanically strong and elastic acrylamide-based matrix, useful for a wide variety of electrophoretic applications. The matrix is stable as a refrigerated solution for one year. Upon addition of appropriate catalysts, Duracryl forms a polymer-reinforced polyacrylamide gel matrix suitable for electrophoresis. The polymer-reinforced gel is superior to conventional polyacrylamide gels in terms of mechanical strength, elasticity and protein silver staining properties. Protein detection sensitivity by silver staining, as well as the linear response of silver deposition versus protein load, is equivalent to standard acrylamide/N,N'-methylene bisacrylamide gels. Additionally, the silver staining properties of the Duracryl matrix result in proteins appearing as monochromatic shades of grey instead of red, brown and yellow, as is the case of conventional polyacrylamide matrices. Monochromatic shades of grey are more suitable for image analysis and densitometry. The matrix is compatible with standard electroblotting and protein N-terminal sequencing procedures. Low acrylic acid content and conductivity allow incorporation of the matrix into isoelectric focusing gels. The matrix was found not to alter polypeptide migration relative to the standard acrylamide/N,N'-methylene bisacrylamide matrix.     

The human receptor for urokinase plasminogen activator. NH2-terminal amino acid sequence and glycosylation variants

The receptor for human urokinase-type plasminogen activator (u-PA) was purified from phorbol 12-myristate 13-acetate-stimulated U937 cells by temperature-induced phase separation of detergent extracts, followed by affinity chromatography with immobilized diisopropyl fluorophosphate-treated u-PA. The purified protein shows a single 55-60 kDa band after sodium dodecyl sulfate-polyacrylamide gel electrophoresis and silver staining. It is a heavily glycosylated protein, the deglycosylated polypeptide chain comprising only 35 kDa. The glycosylated protein contains N-acetyl-D-glucosamine and sialic acid, but no N-acetyl-D-galactosamine. Glycosylation is responsible for substantial heterogeneity in the receptor on phorbol ester-stimulated U937 cells, and also for molecular weight variations among various cell lines. The amino acid composition and the NH2-terminal amino acid sequence are reported. The protein has a high content of cysteine residues. The NH2-terminal sequence is not closely related to any known sequence. The identification of the purified and sequenced protein with the human u-PA receptor is based on the following findings: 1) the ability of the purified protein to bind u-PA and its amino-terminal fragment; 2) the identical electrophoretic mobilities observed for cross-linked conjugates, formed between either the purified protein or the u-PA receptor on intact U937 cells and the above ligands; 3) the identity of the apparent molecular weight of the purified protein to that predicted for the u-PA receptor in the same cross-linking studies; 4) the identical extent of glycosylation of the purified protein and of the u-PA receptor in crude membrane fractions, as detected after cross-linking; 5) the ability of antibodies raised against the purified protein to inhibit cellular binding of the amino-terminal fragment of u-PA.     

Enhanced resolution of random amplified polymorphic DNA genotyping of Pseudomonas aeruginosa

AIMS: To develop a rapid, sensitive and reproducible screening test for the detection of nosocomial spreading of Pseudomonas aeruginosa. METHODS AND RESULTS: Ps. aeruginosa genomic DNA extraction, RAPD-PCR, electrophoresis on acrylamide gel and silver staining were performed by using standardized reagents and conditions. The results were compared with the agarose gel electrophoresis followed by ethidium bromide staining. CONCLUSIONS: The coupling of acrylamide gel electrophoresis and silver staining gave about 80% more DNA bands than the traditional method, allowing a finer discrimination among different Ps. aeruginosa strains. SIGNIFICANCE AND IMPACT OF THE STUDY: By enhancing the resolution of the electrophoretic separation and the sensitivity of the staining, random amplification could be easily applied to the surveillance and prevention of nosocomial infections by clinical microbiology laboratories.     

Purification, amino terminal analysis, and peptide mapping of proteins after in situ postelectrophoretic fluorescent labeling

Proteins fractionated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis were stained in situ with either 5-(dimethylamino)-1-naphthalene sulfonyl chloride (dansyl chloride) or fluorescein isothiocyanate. This staining procedure can be carried out in less than 30 min without previous fixation of the proteins. It is not dependent on such factors as charge or molecular weight of the proteins and can detect 50 ng of protein in a 10-mm-wide gel slot. Fluorescent staining with dansyl chloride was used to localize proteins after electrophoresis for subsequent electroelution, amino terminal analysis, and peptide mapping. The electroelution can be carried out in less than 3 h with yields approaching 100%. The staining of only one strip of a preparative gel allowed the electroelution of proteins without covalent modification. For amino terminal analysis, identical results were obtained when the hydrolysis step was carried out after electroelution or directly in the gel pieces. The peptide mapping can be carried out with the proteins in solution (after electroelution) or directly in the gel pieces. The amino terminal and peptide mapping analysis of each protein in a mixture can be completed within 30 h from the beginning of the electrophoretic fractionation. The method appears to be applicable to a wide range of proteins showing very different biochemical properties.     

Protein blotting with direct blotting electrophoresis

Direct blotting electrophoresis, a method designed to be of general application for the separation and electroblotting of macromolecules, has been adapted to produce protein blots suitable for subsequent processing by standard techniques such as dye staining or immunological detection. After their separation in a very short gel the protein bands are electrophoresed out of the gel onto an immobilizing matrix. The matrix which is moved across the bottom of the gel by a conveyor belt binds these proteins with high affinity. Once the protein samples have been loaded onto the gel and electrophoresis has been started, no further intervention is needed until the blot is completed. The total expenditure of time for such a direct blot is less than 4 h for a mixture of proteins in the molecular weight range of 14-70 kDa. The staining sensitivity of directly blotted proteins is about 200 ng protein per band as revealed by India ink staining.     

Silver staining of native and denatured eucaryotic DNA in agarose gels

A modified method of silver staining for native and denatured eucaryotic DNA in 1% agarose gel is described. This method is at least fivefold more sensitive than ethidium bromide staining, with a detection limit of 2.5 ng for total DNA. The calibration curve is linear within the range 5-30 ng of single-stranded and double-stranded DNA. This method is especially advantageous for electrophoretic assessment of DNA molecular weights.     

Evaluation of two-dimensional difference gel electrophoresis for protein profiling. Soluble proteins of the marine bacterium Pirellula sp. strain 1

Two-dimensional gel electrophoresis (2DE) is a central tool of proteome research, since it allows separation of complex protein mixtures at highest resolution. Quantification of gene expression at the protein level requires sensitive visualization of protein spots over a wide linear range. Two-dimensional difference gel electrophoresis (2D DIGE) is a new fluorescent technique for protein labeling in 2DE gels. Proteins are labeled prior to electrophoresis with fluorescent CyDyes trade mark and differently labeled samples are then co-separated on the same 2DE gel. We evaluated 2D DIGE for detection and quantification of proteins specific for glucose or N-acetylglucosamine metabolism in the marine bacterium Pirellula sp. strain 1. The experiment was based on 10 parallel 2DE gels. Detection and comparison of the protein spots were performed with the DeCyder trade mark software that uses an internal standard to quantify differences in protein abundance with high statistical confidence; 24 proteins differing in abundance by a factor of at least 1.5 (t test value <10(-9)) were identified. For comparison, another experiment was carried out with four SYPRO-Ruby-stained 2DE gels for each of the two growth conditions; image analysis was done with the ImageMaster trade mark 2D Elite software. Sensitivity of the CyDye fluors was evaluated by comparing Cy2, Cy3, Cy5, SYPRO Ruby, silver, and colloidal Coomassie staining. Three replicate gels, each loaded with 50 microg of protein, were run for each stain and the gels were analyzed with the ImageMaster software. Labeling with CyDyes allowed detection of almost as many protein spots as staining with silver or SYPRO Ruby.     

Previsible silver staining of protein in electrophoresis gels with mass spectrometry compatibility

A convenient silver staining method for protein in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) gels is described. The method is previsible, sensitive, and mass spectrometry (MS) compatible. Two visible counter ion dyes, ethyl violet (EV) and zincon (ZC), were used in the first staining solution with a detection limit of 2 to 8 ng/band in approximately 1 h. The dye-stained gel can be further stained by silver staining, which is based on acidic silver staining employing ZC with sodium thiosulfate as silver ion sensitizers. Especially, ZC has silver ion reducing power by cleavage of the diazo bond of the dye during silver reduction. The second silver staining can be completed in approximately 1 h with a detection limit of 0.2 ng/band.     

A blue dive: from ‘blue fingers’ to ‘blue silver’. A comparative overview of staining methods for in-gel proteomics

Gel-based proteomics are the most useful method for protein separation, even when compared with gel-free proteomics. Proteomic analysis by 2D gel electrophoresis (2-DE) with immobilized pH gradients is in turn the best approach to large-scale protein-expression screening. Spots visualization is pivotal for protein identification by mass spectrometry. Commonly used staining methods with excellent mass spectrometry compatibility are coomassie brilliant blue (CBB) or fluorescent dyes. In this study, an implementation of ‘blue silver’ colloidal CBB staining, characterized by high sensitivity and immediate low background, is discussed. The sensitivity of classical, colloidal and ‘blue silver’ CBB staining methods was compared on monodimensional and 2-DE gels. The implementation of the ‘blue silver’ method performs better, provided the physical state of the micelles is respected. An example of a 2-DE of human urine treated with combinatorial peptide ligand libraries demonstrates that implemented ‘blue silver’ can evidence the complexity of the sample.     

Staining properties of bovine low molecular weight hydrophobic surfactant proteins after polyacrylamide gel electrophoresis.

Reports describing polyacrylamide gel electrophoresis patterns of bovine hydrophobic surfactant proteins are not consistent. In this study, we found unusual staining characteristics of these proteins that may explain some of these inconsistencies. Low molecular weight surfactant proteins extracted from bronchoalveolar lavage with organic solvent are partially delipidated with Sephadex LH-20 chromatography using chloroform and methanol. Fractions from the first protein peak are dried under nitrogen then subjected to SDS electrophoresis on 20% polyacrylamide gels. Under nonreducing conditions, silver staining identifies 5- and 26-kDa bands, and Coomassie blue identifies 6-, 12-, and 26-kDa bands. When gels are stained with Coomassie blue then silver, the 5- and 26-kDa bands stain with silver and 6- and 12-kDa bands remain stained with Coomassie blue. If gels are first stained with silver then Coomassie blue, similar results occur. We modified the silver staining protocol by treating gels with dithiothreitol or 2-mercaptoethanol after electrophoresis. With this modification, 5-, 6-, 12-, 26-, and also 17-kDa bands are identifiable. Using the modified protocol and restaining gels previously stained with silver, 6-, 12-, and 17-kDa bands that were not identified previously all became visible. In further experiments, protein bands of 6-, 12-, and 26-kDa that were identified by Coomassie blue were electroeluted under nonreducing conditions. After electrophoresis of the eluted 26-kDa protein, bands of 17-, and 26-kDa under nonreducing, and 8-kDa only under reducing conditions, were apparent by using the modified silver protocol.(ABSTRACT TRUNCATED AT 250 WORDS)     

High resolution two-dimensional gel electrophoresis of human erythrocyte membrane proteins.

Three different two-dimensional (2-D) gel electrophoretic techniques have been modified to provide high resolution of human erythrocyte membrane proteins. The resulting gels were referenced to the established one-dimensional (1-D) sodium dodecylsulfate (SDS) gel electrophoretic profile, and the effects of endogenous proteolysis and cytosolic contamination were studied. It is concluded that in vitro proteolysis and cytosolic contamination do not contribute significantly to the patterns observed on the 2-D gels, under the conditions used for erythrocyte ghost preparation. The procedures require only small quantities of blood; as many as twenty 2-D gel profiles can be obtained from 5 ml of blood. The combination of nonequilibrium isoelectric focusing (IEF) in the first dimension, SDS electrophoresis in the second dimension, and very sensitive silver staining techniques resolves more than 250 individual protein spots. This appears to be the most useful single procedure for the analysis of red cell membrane proteins. Membrane protein profiles from patients with Duchenne muscular dystrophy, Wernicke-Korsakoff syndrome, and acanthocytosis with degeneration of the basal ganglia were compared with normal controls. The patterns for Duchenne muscular dystrophy and Wernicke-Korsakoff syndrome were not different from normal patterns. The pattern for the patient with acanthocytosis and degeneration of the basal ganglia consistently showed a high level for one protein in the 100,000 mol. wt. range.     

Molecular analysis of the histone gene cluster of Psammechinus miliaris: I. Fractionation and identification of five individual histone mRNAs

The electrophoretic separation of labeled “9S” histone mRNAs obtained from cleaving sea urchin polysomes was found at first to be highly unreproducible. It became evident that the secondary structure of the individual mRNAs had a greater effect on their relative electrophoretic mobilities than did their molecular weight differentials. We determined the parameters affecting electrophoretic mobility by the novel method of running the labeled polysomal RNA in slab gels across polyacrylamide and urea gradients. The initially complex and species-specific electrophoretic pattern could then, by a judicious choice of denaturing conditions, be simplified to yield five well defined classes of labeled mRNAs. Using optimal conditions for the separation of the RNA components, five messengers were isolated from Psammechinus embryos by preparative disc electrophoresis, four of which, after two electrophoretic separations, exhibited a unimodal distribution.Each of the mRNAs was translated in vitro, four of the five fractions promoting the synthesis of one major protein. The in vitro products were characterized by comparison of their electrophoretic mobilities with those of known sea urchin histones. It was thus possible to correlate individual mRNAs with specific histones. We propose that the five mRNAs designated a–e in order of decreasing electrophoretic mobility code for the histones H4, H2A, H2B, H3, and H1.     

Artifacts associated with 2-mercaptoethanol upon high resolution two-dimensional electrophoresis

The presence of 2-mercaptoethanol in the protein denaturing solution used to prepare samples for high resolution two-dimensional electrophoresis can result in artifacts when the two-dimensional patterns are detected by silver staining. These are (i) spots of discrete isoelectric point and electrophoretic mobility, (ii) horizontal bands of the same electrophoretic mobility as the spots (corresponding predominantly to molecular weights of 54,000 and 68,000), and (iii) vertical streaks of variable length and intensity. Although the nature and source of artifacts have not been positively identified the evidence suggests that they are probably not inherent in the 2-mercaptoethanol itself but rather released by the latter from some component common to both the first- and second-dimension constituents of the electrophoretic system.     

Rapid method for the assay of 4-aminobutyric acid (GABA), glutamic acid and aspartic acid in brain tissue and subcellular fractions

The thin-layer electrophoretic separation at pH 4.8 of brain extracts and a procedure for fluorescent staining of the plates with fluorescamine are described for the rapid routine determination of 4-aminobutyric acid (GABA), glutamic acid and aspartic acid in brain extracts and in particulate fractions of brain tissue. Automated sample application, electrophoretic separation using two chambers, and quantitation by in situ fluorescence scanning allows the assay of 280 samples within three working days. The method is reproducible (S.D. <8% of the mean) within the range of 0.2–2 nmole per spot. The staining procedure can be applied to a variety of related analytical problems. The method has proved useful for the determination of the specific radioactivities of GABA, glutamic acid and aspartic acid in metabolic studies.