Facile Synthesis of 3D MnO2–Graphene and Carbon Nanotube–Graphene Composite Networks for High‐Performance,Flexible, All‐Solid‐State Asymmetric Supercapacitors

The integration of graphene nanosheets on the macroscopic level using a self‐assembly method has been recognized as one of the most effective strategies to realize the practical applications of graphene materials. Here, a facile and scalable method is developed to synthesis two types of graphene‐based networks, manganese dioxide (MnO₂)–graphene foam and carbon nanotube (CNT)–graphene foam, by solution casting and subsequent electrochemical methods. Their practical applications in flexible all‐solid‐state asymmetric supercapacitors are explored. The proposed method facilitates the structural integration of graphene foam and the electroactive material and offers several advantages including simplicity, efficiency, low‐temperature, and low‐cost. The as‐prepared MnO₂–graphene and CNT–graphene electrodes exhibit high specific capacitances and rate capability. By using polymer gel electrolytes, a flexible all‐solid‐state asymmetric supercapacitor was synthesized with MnO₂–graphene foam as the positive electrode and CNT‐graphene as the negative electrode. The asymmetric supercapacitors can be cycled reversibly in a high‐voltage region of 0 to 1.8 V and exhibit high energy density, remarkable rate capability, reasonable cycling performance, and excellent flexibility.     

MoS2‐Based All‐Purpose Fibrous Electrode and Self‐Powering Energy Fiber for Efficient Energy Harvesting and Storage

Here an all‐purpose fibrous electrode based on MoS₂ is demonstrated, which can be employed for versatile energy harvesting and storage applications. In this coaxial electrode, ultrathin MoS₂ nanofilms are grown on TiO₂ nanoparticles coated carbon fiber. The high electrochemical activity of MoS₂ and good conductivity of carbon fiber synergistically lead to the remarkable performances of this novel composite electrode in fibrous dye‐sensitized solar cells (showing a record‐breaking conversion efficiency of 9.5%) and high‐capacity fibrous supercapacitors. Furthermore, a self‐powering energy fiber is fabricated by combining a fibrous dye‐sensitized solar cell and a fibrous supercapacitor into a single device, showing very fast charging capability (charging in 7 s under AM1.5G solar illumination) and an overall photochemical‐electricity energy conversion efficiency as high as 1.8%. In addition, this wire‐shaped electrode can also be used for fibrous Li‐ion batteries and electrocatalytic hydrogen evolution reactions. These applications indicate that the MoS₂‐based all‐purpose fibrous electrode has great potential for the construction of high‐performance flexible and wearable energy devices.     

Fast Li Storage in MoS2‐Graphene‐Carbon Nanotube Nanocomposites: Advantageous Functional Integration of 0D, 1D,and 2D Nanostructures

A 3D porous composite consisting of nano‐0D MoS₂, nano‐1D carbon nanotubes (CNTs), and nano‐2D graphene is successful prepared using an electrostatic spray deposition (ESD) technique. Depending on the preparation procedure either nanodots of amorphous MoS₂ (0.5–5 nm) or nanocrystalline few‐layered MoS₂ (5–10 nm) bonded to graphene‐carbon nanotubes backbone are obtained. These functionalized carbon nanotubes adhere to a porous graphene‐based network. Such composites can be directly ­deposited on the current collectors without any binder or conductive additives to assemble a battery that shows superior rate performance and cycling ­stability. For nanodots, nucleation and diffusion issues usually connected with ­conversion are largely mitigated if not totally nullified. The use of mechanically and diffusionally isolated but electrochemically well connected electroactive nanodots offer an effective solution to render conversion reaction reversible. The use of nano‐1D and nano‐2D carbon structures offer additional electrical and mechanical advantages that are discussed. Furthermore, this technique, which is easily extendable to other electrode materials, seems to be of a great potential, especially for thin‐film batteries, flexible batteries, and future ­paintable batteries.     

Combining Nature‐Inspired,Graphene‐Wrapped Flexible Electrodes with Nanocomposite Polymer Electrolyte for Asymmetric Capacitive Energy Storage

Two kinds of free‐standing electrodes, reduced graphene oxide (rGO)‐wrapped Fe‐doped MnO₂ composite (G‐MFO) and rGO‐wrapped hierarchical porous carbon microspheres composite (G‐HPC) are fabricated using a frozen lake‐inspired, bubble‐assistance method. This configuration fully enables utilization of the synergistic effects from both components, endowing the materials to be excellent electrodes for flexible and lightweight electrochemical capacitors. Moreover, a nonaqueous HPC‐doped gel polymer electrolyte (GPE‐HPC) is employed to broad voltage window and improve heat resistance. A fabricated asymmetric supercapacitor based on G‐MFO cathode and G‐HPC anode with GPE‐HPC electrolyte achieves superior flexibility and reliability, enhanced energy/power density, and outstanding cycling stability. The ability to power light‐emitting diodes also indicates the feasibility for practical use. Therefore, it is believed that this novel design may hold great promise for future flexible electronic devices.     

Free‐Standing 3D Nanoporous Duct‐Like and Hierarchical Nanoporous Graphene Films for Micron‐Level Flexible Solid‐State Asymmetric Supercapacitors

High energy density and power density within a limited volume of flexible solid‐state supercapacitors are highly desirable for practical applications. Here, free‐standing high‐quality 3D nanoporous duct‐like graphene (3D‐DG) films are fabricated with high flexibility and robustness as the backbones to deposit flower‐like MnO₂ nanosheets (3D‐DG@MnO₂). The 3D‐DG is the ideal support for the deposition of large amount of active materials because of its large surface area, appropriate pore structure, and negligible volume compared with other kinds of carbon backbones. Moreover, the 3D‐DG preserve the distinctive 2D coherent electronic properties of graphene, in which charge carriers move rapidly with a small resistance through the high‐quality and continuous chemical vapor deposition‐grown graphene building blocks, which results in a high rate performance. Marvelously, ultrathin (≈50 μm) flexible solid‐state asymmetric supercapacitors (ASCs) using 3D‐DG@MnO₂ as the positive electrode and 3D hierarchical nanoporous graphene films as the negative electrode display ultrahigh volumetric energy density (28.2 mW h cm^?3) and power density (55.7 W cm^?3) at 2.0 V. Furthermore, as‐prepared ASCs show high cycle stability clearly demonstrating their broad applications as power supplies in wearable electronic devices.     

Structure‐Controlled,Vertical Graphene‐Based,Binder‐Free Electrodes from Plasma‐Reformed Butter Enhance Supercapacitor Performance

Vertical graphene nanosheets (VGNS) hold great promise for high‐performance supercapacitors owing to their excellent electrical transport property, large surface area and in particular, an inherent three‐dimensional, open network structure. However, it remains challenging to materialise the VGNS‐based supercapacitors due to their poor specific capacitance, high temperature processing, poor binding to electrode support materials, uncontrollable microstructure, and non‐cost effective way of fabrication. Here we use a single‐step, fast, scalable, and environmentally‐benign plasma‐enabled method to fabricate VGNS using cheap and spreadable natural fatty precursor butter, and demonstrate the controllability over the degree of graphitization and the density of VGNS edge planes. Our VGNS employed as binder‐free supercapacitor electrodes exhibit high specific capacitance up to 230 F g^?1 at a scan rate of 10 mV s^?1 and >99% capacitance retention after 1,500 charge‐discharge cycles at a high current density, when the optimum combination of graphitic structure and edge plane effects is utilised. The energy storage performance can be further enhanced by forming stable hybrid MnO₂/VGNS nano‐architectures which synergistically combine the advantages from both VGNS and MnO₂. This deterministic and plasma‐unique way of fabricating VGNS may open a new avenue for producing functional nanomaterials for advanced energy storage devices.     

Vertically Aligned MoS2 Nanosheets Patterned on Electrochemically Exfoliated Graphene for High‐Performance Lithium and Sodium Storage

Molybdenum disulfide (MoS₂) has been recognized as a promising anode material for high‐energy Li‐ion (LIBs) and Na‐ion batteries (SIBs) due to its apparently high capacity and intriguing 2D‐layered structure. The low conductivity, unsatisfied mechanical stability, and limited active material utilization are three key challenges associated with MoS₂ electrodes especially at high current rates and mass active material loading. Here, vertical MoS₂ nanosheets are controllably patterned onto electrochemically exfoliated graphene (EG). Within the achieved hierarchical architecture, the intimate contact between EG and MoS₂ nanosheets, interconnected network, and effective exposure of active materials by vertical channels simultaneously overcomes the above three problems, enabling high mechanical integrity and fast charge transport kinetics. Serving as anode material for LIBs, EG‐MoS₂ with 95 wt% MoS₂ content delivered an ultrahigh‐specific capacity of 1250 mA h g^?1 after 150 stable cycles at 1 A g^?1, which is among the highest values in all reported MoS₂ electrodes, and excellent rate performance (970 mA h g^?1 at 5 A g^?1). Moreover, impressive cycling stability (509 mA h g^?1 at 1 A g^?1 after 250 cycles) and rate capability (423 mA h g^?1 at 2 A g^?1) were also achieved for SIBs. The area capacities reached 1.27 and 0.49 mA h cm^?2 at ≈1 mA cm^?2 for LIBs and SIBs, respectively. This work may inspire the development of new 2D hierarchical structures for high efficiency energy storage and conversion.     

Advanced Electrode Materials Comprising of Structure‐Engineered Quantum Dots for High‐Performance Asymmetric Micro‐Supercapacitors

Micro‐supercapacitors (MSCs) as a new class of energy storage devices have attracted great attention due to their unique merits. However, the narrow operating voltage, slow frequency response, and relatively low energy density of MSCs are still insufficient. Therefore, an effective strategy to improve their electrochemical performance by innovating upon the design from various aspects remains a huge challenge. Here, surface and structural engineering by downsizing to quantum dot scale, doping heteroatoms, creating more structural defects, and introducing rich functional groups to two dimensional (2D) materials is employed to tailor their physicochemical properties. The resulting nitrogen‐doped graphene quantum dots (N‐GQDs) and molybdenum disulfide quantum dots (MoS₂‐QDs) show outstanding electrochemical performance as negative and positive electrode materials, respectively. Importantly, the obtained N‐GQDs//MoS₂‐QDs asymmetric MSCs device exhibits a large operating voltage up to 1.5 V (far exceeding that of most reported MSCs), an ultrafast frequency response (with a short time constant of 0.087 ms), a high energy density of 0.55 mWh cm^?3, and long‐term cycling stability. This work not only provides a novel concept for the design of MSCs with enhanced performance but also may have broad application in other energy storage and conversion devices based on QDs materials.     

Flash Converted Graphene for Ultra‐High Power Supercapacitors

Supercapacitors are known for their rapid energy charge–discharge properties, often ten to a hundred times faster than batteries. However, there is still a demand for supercapacitors with even faster charge–discharge characteristics to fulfill the requirements of emerging technologies. The power and rate capabilities of supercapacitors are highly dependent on the morphology of their electrode materials. An electrically conductive 3D porous structure possessing a high surface area for ions to access is ideal. Using a flash of light, a method to produce highly interconnected 3D graphene architectures with high surface area and good conductivity is developed. The flash converted graphene is synthesized by reducing freeze‐dried graphene oxide using an ordinary camera flash as a photothermal source. The flash converted graphene is used in coin cell supercapacitors to investigate its electrode materials properties. The electrodes are fabricated using either a precoating flash conversion or a postcoating flash conversion of graphene oxide. Both techniques produce supercapacitors possessing ultra‐high power (5–7 × 10⁵ W kg^?1). Furthermore, optimized supercapacitors retain >50% of their capacitance when operated at an ultrahigh current density up to 220 A g^?1.     

Recent Development of Metallic (1T) Phase of Molybdenum Disulfide for Energy Conversion and Storage

The development of a feasible and inexpensive strategy to obtain and utilize sustainable energy is an important issue for the sustainable development of human society. Over the past decade, significant progress has been made in the development of novel functional materials for energy conversion and storage. Owing to their unique physico‐chemical properties, 2D layered materials, such as graphene and transition metal dichalcogenides, have attracted great interest in energy‐related research. 1T‐MoS₂ is a metallic phase of molybdenum disulfide (MoS₂) with extraordinary electronic conductivity, enlarged interlayer spacing, and more electrochemically active sites along the basal plane, which offers intriguing benefits for energy‐related applications compared to its semiconducting counterpart (2H‐MoS₂). This review summarizes the preparation and structure–property relationships of 1T‐MoS₂, as well as the underlying relations between the metallic (1T) and semiconducting (2H) phases of MoS₂. Recent progress in the preparation and stabilization of 1T‐MoS₂ materials and their applications for energy conversion and storage are discussed, including water splitting to form hydrogen via photo/electrocatalysis and electricity storage in lithium‐ion batteries, sodium‐ion batteries, magnesium‐ion batteries, and supercapacitors. Optimization strategies of 1T‐MoS₂ to obtain enhanced practical properties based on theoretical calculations are also presented.     

Nanostructured Ternary Electrodes for Energy‐Storage Applications

A three‐component, flexible electrode is developed for supercapacitors over graphitized carbon fabric, utilizing γ‐MnO₂ nanoflowers anchored onto carbon nanotubes (γ‐MnO₂/CNT) as spacers for graphene nanosheets (GNs). The three‐component, composite electrode doubles the specific capacitance with respect to GN‐only electrodes, giving the highest‐reported specific capacitance (308 F g^?1) for symmetric supercapacitors containing MnO₂ and GNs using a two‐electrode configuration, at a scan rate of 20 mV s^?1. A maximum energy density of 43 W h kg^?1 is obtained for our symmetric supercapacitors at a constant discharge‐current density of 2.5 A g^?1 using GN–(γ‐MnO₂/CNT)‐nanocomposite electrodes. The fabricated supercapacitor device exhibits an excellent cycle life by retaining ≈90% of the initial specific capacitance after 5000 cycles.     

MoS2/Graphene Nanosheets from Commercial Bulky MoS2 and Graphite as Anode Materials for High Rate Sodium‐Ion Batteries

Tuning heterointerfaces between hybrid phases is a very promising strategy for designing advanced energy storage materials. Herein, a low‐cost, high‐yield, and scalable two‐step approach is reported to prepare a new type of hybrid material containing MoS₂/graphene nanosheets prepared from ball‐milling and exfoliation of commercial bulky MoS₂ and graphite. When tested as an anode material for a sodium‐ion battery, the as‐prepared MoS₂/graphene nanosheets exhibit remarkably high rate capability (284 mA h g^?1 at 20 A g^?1 (≈30C) and 201 mA h g^?1 at 50 A g^?1 (≈75C)) and excellent cycling stability (capacity retention of 95% after 250 cycles at 0.3 A g^?1). Detailed experimental measurements and density functional theory calculation reveal that the functional groups in 2D MoS₂/graphene heterostructures can be well tuned. The impressive rate capacity of the as‐prepared MoS₂/graphene hybrids should be attributed to the heterostructures with a low degree of defects and residual oxygen containing groups in graphene, which subsequently improve the electronic conductivity of graphene and decrease the Na⁺ diffusion barrier at the MoS₂/graphene interfaces in comparison with the acid treated one.     

Graphene‐Based Nanocomposites for Energy Storage

Since the first report of using micromechanical cleavage method to produce graphene sheets in 2004, graphene/graphene‐based nanocomposites have attracted wide attention both for fundamental aspects as well as applications in advanced energy storage and conversion systems. In comparison to other materials, graphene‐based nanostructured materials have unique 2D structure, high electronic mobility, exceptional electronic and thermal conductivities, excellent optical transmittance, good mechanical strength, and ultrahigh surface area. Therefore, they are considered as attractive materials for hydrogen (H₂) storage and high‐performance electrochemical energy storage devices, such as supercapacitors, rechargeable lithium (Li)‐ion batteries, Li–sulfur batteries, Li–air batteries, sodium (Na)‐ion batteries, Na–air batteries, zinc (Zn)–air batteries, and vanadium redox flow batteries (VRFB), etc., as they can improve the efficiency, capacity, gravimetric energy/power densities, and cycle life of these energy storage devices. In this article, recent progress reported on the synthesis and fabrication of graphene nanocomposite materials for applications in these aforementioned various energy storage systems is reviewed. Importantly, the prospects and future challenges in both scalable manufacturing and more energy storage‐related applications are discussed.     

Vanadium Oxide Nanowire–Carbon Nanotube Binder‐Free Flexible Electrodes for Supercapacitors

Vanadium pentoxide (V₂O₅) layered nanostructures are known to have very stable crystal structures and high faradaic activity. The low electronic conductivity of V₂O₅ greatly limits the application of vanadium oxide as electrode materials and requires combining with conducting materials using binders. It is well known that the organic binders can degrade the overall performance of electrode materials and need carefully controlled compositions. In this study, we develop a simple method for preparing freestanding carbon nanotube (CNT)‐V₂O₅ nanowire (VNW) composite paper electrodes without using binders. Coin cell type (CR2032) supercapacitors are assembled using the nanocomposite paper electrode as the anode and high surface area carbon fiber electrode (Spectracarb 2225) as the cathode. The supercapacitor with CNT‐VNW composite paper electrode exhibits a power density of 5.26 kW Kg^?1 and an energy density of 46.3 Wh Kg^?1. (Li)VNWs and CNT composite paper electrodes can be fabricated in similar manner and show improved overall performance with a power density of 8.32 kW Kg^?1 and an energy density of 65.9 Wh Kg^?1. The power and energy density values suggest that such flexible hybrid nanocomposite paper electrodes may be useful for high performance electrochemical supercapacitors.     

All Pseudocapacitive MXene‐RuO2 Asymmetric Supercapacitors

2D transition metal carbides and nitrides, known as MXenes, are an emerging class of 2D materials with a wide spectrum of potential applications, in particular in electrochemical energy storage. The hydrophilicity of MXenes combined with their metallic conductivity and surface redox reactions is the key for high‐rate pseudocapacitive energy storage in MXene electrodes. However, symmetric MXene supercapacitors have a limited voltage window of around 0.6 V due to possible oxidation at high anodic potentials. In this study, the fact that titanium carbide MXene (Ti₃C₂T_x) can operate at negative potentials in acidic electrolyte is exploited, to design an all‐pseudocapacitive asymmetric device by combining it with a ruthenium oxide (RuO₂) positive electrode. This asymmetric device operates at a voltage window of 1.5 V, which is about two times wider than the operating voltage window of symmetric MXene supercapacitors, and is the widest voltage window reported to date for MXene‐based supercapacitors. The complementary working potential windows of MXene and RuO₂, along with proton‐induced pseudocapacitance, significantly enhance the device performance. As a result, the asymmetric devices can deliver an energy density of 37 µW h cm^?2 at a power density of 40 mW cm^?2, with 86% capacitance retention after 20 000 charge–discharge cycles. These results show that pseudocapacitive negative MXene electrodes can potentially replace carbon‐based materials in asymmetric electrochemical capacitors, leading to an increased energy density.     

CoNi2S4‐Graphene‐2D‐MoSe2 as an Advanced Electrode Material for Supercapacitors

3D CoNi₂S₄‐graphene‐2D‐MoSe₂ (CoNi₂S₄‐G‐MoSe₂) nanocomposite is designed and prepared using a facile ultrasonication and hydrothermal method for supercapacitor (SC) applications. Because of the novel nanocomposite structures and resultant maximized synergistic effect among ultrathin MoSe₂ nanosheets, highly conductive graphene and CoNi₂S₄ nanoparticles, the electrode exhibits rapid electron and ion transport rate and large electroactive surface area, resulting in its amazing electrochemical properties. The CoNi₂S₄‐G‐MoSe₂ electrode demonstrates a maximum specific capacitance of 1141 F g^?1, with capacitance retention of ≈108% after 2000 cycles at a high charge–discharge current density of 20 A g^?1. As to its symmetric device, 109 F g^?1 at a scan rate of 5 mV s^?1 is exhibited. This pioneering work should be helpful in enhancing the capacitive performance of SC materials by designing nanostructures with efficient synergetic effects.     

MoS2 Nanosheets Vertically Aligned on Carbon Paper: A Freestanding Electrode for Highly Reversible Sodium‐Ion Batteries

The development of sodium‐ion batteries for large‐scale applications requires the synthesis of electrode materials with high capacity, high initial Coulombic efficiency (ICE), high rate performance, long cycle life, and low cost. A rational design of freestanding anode materials is reported for sodium‐ion batteries, consisting of molybdenum disulfide (MoS₂) nanosheets aligned vertically on carbon paper derived from paper towel. The hierarchical structure enables sufficient electrode/electrolyte interaction and fast electron transportation. Meanwhile, the unique architecture can minimize the excessive interface between carbon and electrolyte, enabling high ICE. The as‐prepared MoS₂@carbon paper composites as freestanding electrodes for sodium‐ion batteries can liberate the traditional electrode manufacturing procedure, thereby reducing the cost of sodium‐ion batteries. The freestanding MoS₂@carbon paper electrode exhibits a high reversible capacity, high ICE, good cycling performance, and excellent rate capability. By exploiting in situ Raman spectroscopy, the reversibility of the phase transition from 2H‐MoS₂ to 1T‐MoS₂ is observed during the sodium‐ion intercalation/deintercalation process. This work is expected to inspire the development of advanced electrode materials for high‐performance sodium‐ion batteries.     

A Three‐Dimensionally Interconnected Carbon Nanotube–Conducting Polymer Hydrogel Network for High‐Performance Flexible Battery Electrodes

High‐performance flexible energy‐storage devices have great potential as power sources for wearable electronics. One major limitation to the realization of these applications is the lack of flexible electrodes with excellent mechanical and electrochemical properties. Currently employed batteries and supercapacitors are mainly based on electrodes that are not flexible enough for these purposes. Here, a three‐dimensionally interconnected hybrid hydrogel system based on carbon nanotube (CNT)‐conductive polymer network architecture is reported for high‐performance flexible lithium ion battery electrodes. Unlike previously reported conducting polymers (e.g., polyaniline, polypyrrole, polythiophene), which are mechanically fragile and incompatible with aqueous solution processing, this interpenetrating network of the CNT‐conducting polymer hydrogel exibits good mechanical properties, high conductivity, and facile ion transport, leading to facile electrode kinetics and high strain tolerance during electrode volume change. A high‐rate capability for TiO₂ and high cycling stability for SiNP electrodes are reported. Typically, the flexible TiO₂ electrodes achieved a capacity of 76 mAh g^–1 in 40 s of charge/discharge and a high areal capacity of 2.2 mAh cm^–2 can be obtained for flexible SiNP‐based electrodes at 0.1C rate. This simple yet efficient solution process is promising for the fabrication of a variety of high performance flexible electrodes.     

All‐Printed MnHCF‐MnOx‐Based High‐Performance Flexible Supercapacitors

Here, a simple active materials synthesis method is presented that boosts electrode performance and utilizes a facile screen‐printing technique to prepare scalable patterned flexible supercapacitors based on manganese hexacyanoferrate‐manganese oxide and electrochemically reduced graphene oxide electrode materials (MnHCF‐MnO_x/ErGO). A very simple in situ self‐reaction method is developed to introduce MnO_x pseudocapacitor material into the MnHCF system by using NH₄F. This MnHCF‐MnO_x electrode materials can deliver excellent capacitance of 467 F g^?1 at a current density of 1 A g^?1, which is a 2.4 times capacitance increase compared to MnHCF. In addition a printed, patterned, flexible MnHCF‐MnO_x/ErGO supercapacitor is fabricated, showing a remarkable areal capacitance of 16.8 mF cm^?2 and considerable energy and power density of 0.5 mWh cm^?2 and 0.0023 mW cm^?2, respectively. Furthermore, the printed patterned flexible supercapacitors also exhibit exceptional flexibility, and the capacitance remains stable, even while bending to various angles (60°, 90°, and 180°) and for 100 cycles. The flexible supercapacitor arrays integrated by multiple prepared single supercapacitors can power various LEDs even in the bent states. This approach offers promising opportunities for the development of printable energy storage materials and devices with high energy density, large scalability, and excellent flexibility.     

Scalable Water‐Based Production of Highly Conductive 2D Nanosheets with Ultrahigh Volumetric Capacitance and Rate Capability

Highly conductive and ultrathin 2D nanosheets are of importance for the development of portable electronics and electric vehicles. However, scalable production and rational design for highly electronic and ionic conductive 2D nanosheets still remain a challenge. Herein, an industrially adoptable fluid dynamic exfoliation process is reported to produce large quantities of ionic liquid (IL)‐functionalized metallic phase MoS₂ (m‐MoS₂) and defect‐free graphene (Gr) sheets. Hybrid 2D–2D layered films are also fabricated by incorporating Gr sheets into compact m‐MoS₂ films. The incorporated IL functionalities and Gr sheets prevent aggregation and restacking of the m‐MoS₂ sheets, thereby creating efficient and rapid ion and electron pathways in the hybrid films. The hybrid film with a high packing density of 2.02 g cm^?3 has an outstanding volumetric capacitance of 1430.5 F cm^?3 at 1 A g^?1 and an extremely high rate capability of 80% retention at 1000 A g^?1. The flexible supercapacitor assembled using a polymer‐gel electrolyte exhibits excellent resilience to harsh electrochemical and mechanical conditions while maintaining an impressive rate performance and long cycle life. Successful achievement of an ultrahigh volumetric energy density (1.14 W h cm^?3) using an organic electrolyte with a wide cell voltage of ≈3.5 V is demonstrated.