Recent advances in ABE fermentation: hyper-butanol producing Clostridium beijerinckii BA101

This is an overview of the mutant strain Clostridium beijerinckii BA101 which produces solvents (acetone–butanol–ethanol, ABE) at elevated levels. This organism expresses high levels of amylases when grown on starch. C. beijerinckii BA101 hydrolyzes starch effectively and produces solvent in the concentration range of 27–29 g l⁻¹. C. beijerinckii BA101 has been characterized for both substrate and butanol inhibition. Supplementing the fermentation medium (MP2) with sodium acetate enhances solvent production to 33 g l⁻¹. The results of studies utilizing commercial fermentation medium and pilot plant-scale reactors are consistent with the results using small-scale reactors. Pervaporation, a technique to recover solvents, has been applied to fed-batch reactors containing C. beijerinckii BA101, and solvent production as high as 165 g l⁻¹ has been achieved. Immobilization of C. beijerinckii BA101 by adsorption and use in a continuous reactor resulted in reactor productivity of 15.8 g l⁻¹ h⁻¹. Recent economic studies employing C. beijerinckii BA101 suggested that butanol can be produced at US$0.20–0.25 lb⁻¹ by employing batch fermentation and distillative recovery. Application of new technologies such as pervaporation, fed-batch culture, and immobilized cell reactors is expected to further reduce these prices. Journal of Industrial Microbiology & Biotechnology (2001) 27, 287–291. Received 12 September 2000/ Accepted in revised form 27 January 2001     

Controlling the oxidoreduction potential of the culture of <Emphasis Type="Italic">Clostridium acetobutylicum</Emphasis> leads to an earlier initiation of solventogenesis,thus increasing solvent productivity

Fermentative production of solvents (acetone, butanol, and ethanol) by Clostridium acetobutylicum is generally a biphasic process consisting of acidogenesis and solventogenesis. We report that the biphasic metabolism of C. acetobutylicum could be changed by oxidoreduction potential (ORP) regulation. When using air to control the ORP of the fermentation broth at −290 mV, an earlier initiation of solventogenesis was achieved. Solvent production reached 25.6 g l⁻¹ (2.8 g acetone l⁻¹, 16.8 g butanol l⁻¹, 6.0 g ethanol l⁻¹), a 35% increase compared with the ORP uncontrolled process. Metabolic flux analysis revealed that there was a general increase of the central carbon flux in the first 24 h of fermentation when ORP was controlled at −290 mV, compared with the control. Specifically, the solvent ratio (acetone:butanol:ethanol) was changed from 25:64:11 to 11:66:23 at ORP level of −290 mV, which might have resulted from the rigidity at acetyl-CoA node and the flexibility at acetoacetyl-CoA and butyryl-CoA nodes in response to ORP regulation.     

Spectroscopic properties and temperature induced electronic configuration changes of all-<Emphasis Type="Italic">trans</Emphasis> and 15-<Emphasis Type="Italic">cis</Emphasis> β-carotenes in ionic liquids

The clear vibrational structure of fluorescence spectrum of β-carotene in the solvent is reported for the first time at room temperature. This finding is in good agreement with recently discovered covalent 3 ¹A _g ⁻ new carotenoid state. The fluorescence yield of β-carotene in ionic liquid (1-methyl-3-octyloxymethylimidazolium tetrafluoroborate) is around hundred times higher than in standard solvent n-hexane. The all-trans and 15-cis β-carotene fluorescence yields in ionic liquid are 1.96±0.03 and 2.53±0.03 %, respectively. The ionic liquid is a very useful tool for modelling photosynthetic system in situ. We present the electronic absorption data of β-carotene in ionic liquids (so called neoteric solvents) with special interest in the absorption changes as a function of temperature in the range 0–90 °C (273–363 K). Ionic liquids are also very good medium for temperature study, because they are not changing up to several hundred °C and also not evaporating during heating. The relationship between spectral characteristics of β-carotene in new generation solvents with increasing and decreasing temperature is evaluated. The energy value of the ionic state 1 ¹B _u ⁺ of synthetic β-carotene in ionic liquids exhibits a linear and temperature reversible dependence on temperature up to 30 °C (303 K) and up to 40 °C (313 K) for 15-cis and all-trans β-carotenes, respectively. This is valid for both 0-0 and 0-1 transitions.     

Improvement of xylose utilization in Clostridium acetobutylicum via expression of the talA gene encoding transaldolase from Escherichia coli

Clostridium acetobutylicum ATCC 824 was metabolically engineered for improved xylose utilization. The gene talA, which encodes transaldolase from Escherichia coli K-12, was cloned and overexpressed in C. acetobutylicum ATCC 824. Compared with C. acetobutylicum ATCC 824 (824-WT), the transformant bearing the E. coli talA gene (824-TAL) showed improved ability on xylose utilization and solvents production using xylose as the sole carbon source. During the fermentation of xylose and glucose mixtures with three xylose/glucose ratios (approximately 1:2, 1:1 and 2:1), the rate of xylose consumption and final solvents titers of 824-TAL were all higher than those of 824-WT, despite glucose repression on xylose uptake still existing. These results suggest that the insufficiency of transaldolase in the pentose phosphate pathway (PPP) of C. acetobutylicum is one of the bottlenecks for xylose metabolism and therefore, overexpressing the gene encoding transaldolase is able to improve xylose utilization and solvent production.     

Diacetyl fermentation coupled with pervaporation using oleyl alcohol supported liquid membrane

Pervaporation using oleyl alcohol supported liquid membrane was successfully applied to diacetyl fermentation by immobilized lactic acid bacteria. Diacetyl productivity was about 10 g·m⁻³·h⁻¹, while productivity during batch fermentation was about 6 g·m⁻³·h⁻¹. Diacetyl yield from consumed glucose was about 0.04 g·g⁻¹ which was 4 times as large as that of batch fermentation. The pervaporation functioned favorably on actual fermentation broth. The flux of the permeate and the diacetyl separation factor for the pervaporation were about 9 g·m⁻²·h⁻¹ and 36, respectively, and these values were maintained at almost constant levels during fermentation. Diacetyl concentration in the permeate was about 2 kg·m⁻³, which is sufficiently high for commercial use.     

Comparative investigations of growth and solvent formation in ‘Clostridium saccharoperbutylacetonicum’ DSM 2152 and Clostridium acetobutylicum DSM 792

The butanol and acetone-producing strain DSM 2152, invalidly described as ‘Clostridium saccharoperbutylacetonicum’ is compared with the type strain C. acetobutylicum, DSM 792, with respect to solvent and acid formation at varying pH values and growth rates. Batch cultures, product-limited chemostat and pH-auxostat cultures were used for characterization. Under all conditions strain DSM 2152 produced much lower amounts of butyric and acetic acids than the type strain. The pH optimum for solvent formation was higher, ie 5.5 instead of 4.5. Solvent formation occurred at higher dilution rates, but below 0.1 h⁻¹ a lower solvent concentration was obtained, indicating that acid production was too low to provide a sufficient amount for acetone formation. The results are discussed in the light of recent publications on the taxonomy of butanol-acetone producing clostridia using 16S rRNA sequence analysis and other nucleic acid data. The presently suggested ‘phylogenetic’ classification of the collective species, C. acetobutylicum, is also reflected in the fermentation characteristics. Received 21 December 1998/ Accepted in revised form 22 January 1999     

Continuous cultures of Clostridium acetobutylicum: culture stability and low-grade glycerol utilisation

Continuous cultures of two strains of Clostridium acetobutylicum were stable for over 70 d when grown on glucose/glycerol mixtures. Butanol was the major fermentation end-product, accounting for 43 to 62% (w/w) of total products. Low-grade glycerol [65% (w/v) purity] could replace commercial glycerol [87% (w/v) purity], leading to a similar fermentation pattern: a butanol yield of 0.34 (mol/mol), a butanol productivity of 0.42 g l^–1 h^–1 and a 84% (w/w) glycerol consumption were attained when cultures were grown at pH 6 and D = 0.05 h^–1; butanol accounted for 94% (w/w) of total solvents. These values are among the highest reported in literature for C. acetobutylicum simple chemostats.     

Production of butanol from starch-based waste packing peanuts and agricultural waste

We examined the fermentation of starch-based packing peanuts and agricultural wastes as a source of fermentable carbohydrates using Clostridium beijerinckii BA101. Using semidefined P2 medium containing packing peanuts and agricultural wastes, instead of glucose as a carbohydrate source, we measured characteristics of the fermentation including solvent production, productivity, and yield. With starch as substrate (control), the culture produced 24.7 g l⁻¹ acetone–butanol–ethanol (ABE), while with packing peanuts it produced 21.7 g l⁻¹ total ABE with a productivity of 0.20 g l⁻¹ h⁻¹ and a solvent (ABE) yield of 0.37. Cell growth in starch, packing peanuts, and agricultural wastes medium was different, possibly due to the different nature of these substrates. Using model agricultural waste, 20.3g l⁻¹ ABE was produced; when using actual waste, 14.8 g l⁻¹ ABE was produced. The use of inexpensive substrates will increase the economic viability of the conversion of biomass to butanol, and can provide new markets for these waste streams. Journal of Industrial Microbiology & Biotechnology (2002) 29, 117–123 doi: 10.1038/sj.jim.7000285 Received 14 November 2001/ Accepted in revised form 07 June 2002     

Acetone–butanol–ethanol production with high productivity using Clostridium acetobutylicum BKM19

Conventional acetone–butanol–ethanol (ABE) fermentation is severely limited by low solvent titer and productivities. Thus, this study aims at developing an improved Clostridium acetobutylicum strain possessing enhanced ABE production capability followed by process optimization for high ABE productivity. Random mutagenesis of C. acetobutylicum PJC4BK was performed by screening cells on fluoroacetate plates to isolate a mutant strain, BKM19, which exhibited the total solvent production capability 30.5% higher than the parent strain. The BKM19 produced 32.5 g L^?1 of ABE (17.6 g L^?1 butanol, 10.5 g L^?1 ethanol, and 4.4 g L^?1 acetone) from 85.2 g L^?1 glucose in batch fermentation. A high cell density continuous ABE fermentation of the BKM19 in membrane cell‐recycle bioreactor was studied and optimized for improved solvent volumetric productivity. Different dilution rates were examined to find the optimal condition giving highest butanol and ABE productivities. The maximum butanol and ABE productivities of 9.6 and 20.0 g L^?1 h^?1, respectively, could be achieved at the dilution rate of 0.85 h^?1. Further cell recycling experiments were carried out with controlled cell‐bleeding at two different bleeding rates. The maximum solvent productivities were obtained when the fermenter was operated at a dilution rate of 0.86 h^?1 with the bleeding rate of 0.04 h^?1. Under the optimal operational condition, butanol and ABE could be produced with the volumetric productivities of 10.7 and 21.1 g L^?1 h^?1, and the yields of 0.17 and 0.34 g g^?1, respectively. The obtained butanol and ABE volumetric productivities are the highest reported productivities obtained from all known‐processes. Biotechnol. Bioeng. 2013; 110: 1646–1653. © 2013 Wiley Periodicals, Inc.     

Genome analysis of a hyper acetone‐butanol‐ethanol (ABE) producing Clostridium acetobutylicum BKM19

Previously the development of a hyper acetone‐butanol‐ethanol (ABE) producing Clostridium acetobutylicum BKM19 strain capable of producing 30.5% more total solvent by random mutagenesis of its parental strain PJC4BK, which is a buk mutant C. acetobutylicum ATCC 824 strain is reported. Here, BKM19 and PJC4BK strains are re‐sequenced by a high‐throughput sequencing technique to understand the mutations responsible for enhanced solvent production. In comparison with the C. acetobutylicum PJC4BK, 13 single nucleotide variants (SNVs), one deletion and one back mutation SNV are identified in the C. acetobutylicum BKM19 genome. Except for one SNV found in the megaplasmid, all mutations are found in the chromosome of BKM19. Among them, a mutation in the thlA gene encoding thiolase is further studied with respect to enzyme activity and butanol production. The mutant thiolase (thlA^V5A) is showed a 32% higher activity than that of the wild‐type thiolase (thlA^WT). In batch fermentation, butanol production is increased by 26% and 23% when the thlA^V5A gene is overexpressed in the wild‐type C. acetobutylicum ATCC 824 and in its derivative, the thlA‐knockdown TKW‐A strain, respectively. Based on structural analysis, the mutation in thiolase does not have a direct effect on the regulatory determinant region (RDR). However, the mutation at the 5^th residue seems to influence the stability of the RDR, and thus, increases the enzymatic activity and enhances solvent production in the BKM19 strain.     

Evaluation of solvents for extractive butanol fermentation with Clostridium acetobutylicum and the use of poly(propylene glycol) 1200

Summary In an effort to improve the viability of acetone-butanol-ethanol fermentation by extractive fermentation, 63 organic solvents, including alkanes, alcohols, aldehydes, acids, and esters, were experimentally evaluated for biocompatibility with Clostridium acetobutylicum by observing gas evolution from cultures in contact with candidate solvents. Thirty-one of these solvents were further tested to determine their partition coefficient for butanol in fermentation medium. The biocompatible solvent with the highest partition coefficient for butanol (4.8), was poly(propylene glycol) 1200, which was selected for fermentation experiments. This is the highest partition coefficient reported to date for a biocompatible solvent. Extractive fermentations using concentrated feeds were observed to produce up to 58.6 g·l^–1 acetone and butanol in 202 h, the equivalent of three control fermentations in a single run. Product yields (based on total solvent products and glucose consumed) of 0.234 g·g^–1 to 0.311 g·g^–1 and within run solvent productivities of 0.174 g·l^–1·h^–1 to 0.290 g·l^–1·h^–1 were consistentwith conventional fermentations reported in the literature. The extended run-time of the fermentation resulted in an overall improvement in productivity by reducing the fraction of between-run down-time for fermentor cleaning and sterilization.     

Direct fermentation of gelatinized sago starch to acetone–butanol–ethanol by Clostridium acetobutylicum

Direct fermentation of gelatinized sago starch into solvent (acetone–butanol–ethanol) by Clostridium acetobutylicum P262 was studied using a 250 ml Schott bottle anaerobic fermentation system. Total solvent production from fermentation using 30 g sago starch/l (11.03g/l) was comparable to fermentation using corn starch and about 2-fold higher than fermentation using potato or tapioca starch. At the range of sago starch concentration investigated (10–80 g/l), the highest total solvent production (18.82 g/l) was obtained at 50 g/l. The use of a mixture of organic and inorganic nitrogen source (yeast extract + NH₄NO₃) enhanced growth of C. acetobutylicum, starch hydrolysis and solvent production (24.47 g/l) compared to the use of yeast extract alone. This gave the yield based on sugar consumed of 0.45 g/g. Result from this study also showed that the individual concentrations of nitrogen and carbon influenced solvent production to a greater extent than did carbon to nitrogen (C/N) ratio.     

Improvement in lactic acid production from starch using α-amylase-secreting <Emphasis Type="Italic">Lactococcus lactis</Emphasis> cells adapted to maltose or starch

To achieve direct and efficient lactic acid production from starch, a genetically modified Lactococcus lactis IL 1403 secreting α-amylase, which was obtained from Streptococcus bovis 148, was constructed. Using this strain, the fermentation of soluble starch was achieved, although its rate was far from efficient (0.09 g l⁻¹ h⁻¹ lactate). High-performance liquid chromatography revealed that maltose accumulated during fermentation, and this was thought to lead to inefficient fermentation. To accelerate maltose consumption, starch fermentation was examined using L. lactis cells adapted to maltose instead of glucose. This led to a decrease in the amount of maltose accumulation in the culture, and, as a result, a more rapid fermentation was accomplished (1.31 g l⁻¹ h⁻¹ lactate). Maximum volumetric lactate productivity was further increased (1.57 g l⁻¹ h⁻¹ lactate) using cells adapted to starch, and a high yield of lactate (0.89 g of lactate per gram of consumed sugar) of high optical purity (99.2% of l-lactate) was achieved. In this study, we propose a new approach to lactate production by α-amylase-secreting L. lactis that allows efficient fermentation from starch using cells adapted to maltose or starch before fermentation.     

Development of flow cytometry technique for detection of thinning of peptidoglycan layer as a result of solvent production by <Emphasis Type="Italic">Clostridium pasteurianum</Emphasis>

Clostridium pasteurianum forms acetic and butyric acids in an initial growth phase, which is a typical feature of clostridial acetone-butanol fermentation where an initial accumulation of acids is followed by production of solvents 1-butanol, acetone and ethanol. The initiation of the solvent production coupled with endospore formation leads to decrease of cell-wall thickness; thinner cell wall is more resistant against solvents and dyes. These changes can be observed by the method based on adaptation of Gram staining. The cell wall of G⁺ bacteria allows the entry of hexidium iodide and rhodamine 123, whereas the outer membrane of G⁻ bacteria does not allow the uptake and therefore G⁺ bacteria are stained with higher fluorescence intensity than G⁻ bacteria. The ratio of fluorescence intensity (FI) to forward scatter (FSC) was determined to correspond to G⁺ bacteria when clostridia were producing less solvents. The significant drop of the ratio FI to FSC to the level corresponding to G⁻ bacteria is detected after initiation of solvent production.     

Solvent screening methodology for in situ ABE extractive fermentation

Solvent screening for in situ liquid extraction of products from acetone-butanol-ethanol (ABE) fermentation was carried out, taking into account biological parameters (biocompatibility, bioavailability, and product yield) and extraction performance (partition coefficient and selectivity) determined in real fermentation broth. On the basis of different solvent characteristics obtained from literature, 16 compounds from different chemical families were selected and experimentally evaluated for their extraction capabilities in a real ABE fermentation broth system. From these compounds, nine potential solvents were also tested for their biocompatibility towards Clostridium acetobutylicum. Moreover, bioavailability and differences in substrate consumption and total n-butanol production with respect to solvent-free fermentations were quantified for each biocompatible solvent. Product yield was enhanced in the presence of organic solvents having higher affinity for butanol and butyric acid. Applying this methodology, it was found that the Guerbet alcohol 2-butyl-1-octanol presented the best extracting characteristics (the highest partition coefficient (6.76) and the third highest selectivity (644)), the highest butanol yield (27.4 %), and maintained biocompatibility with C. acetobutylicum.     

Uptake and activation of acetate and butyrate in Clostridium acetobutylicum

Summary The pathway for uptake of acids during the solvent formation phase of an acetone-butanol fermentation by Clostridium acetobutylicum ATCC 824 was studied. ¹³C NMR investigations on actively metabolizing cells showed that butyrate can be taken up from the medium and quantitatively converted to butanol without accumulation of intermediates. The activities of acetate phosphotransacetylase, acetate kinase and phosphate butyryltransferase rapidly decreased to very low levels when the organism began to form solvents. This indicates that the uptake of acids does not occur via a reversal of these acid forming enzymes. No short-chain acyl-CoA synthetase activity or butyryl phosphate reducing activity could be detected. Based on our results and a critical analysis of literature data on acetone-butanol fermentations, it is suggested that an acetoacetyl-CoA: acetate (butyrate) CoA-transferase is solely responsible for uptake and activation of acetate and butyrate in C. acetobutylicum. The transferase exhibits a broad carboxylic acid specificity. The key enzyme in the uptake is acetoacetate decarboxylase, which is induced late in the fermentation and pulls the transferase reaction towards formation of acetoacetate. The major implication is that it is not feasible to obtain a batch-wise butanol fermentation without acetone formation and retention of a good yield of butanol.     

Production of cephamycin C by <Emphasis Type="Italic">Streptomyces clavuligerus</Emphasis> NT4 using solid-state fermentation

Cephamycin C is an extracellular broad spectrum β-lactam antibiotic produced by Streptomyces clavuligerus, S. cattleya and Nocardia lactamdurans. In the present study, different substrates for solid-state fermentation were screened for maximum cephamycin C production by S. clavuligerus NT4. The fermentation parameters such as substrate concentration, moisture content, potassium dihydrogen phosphate, inoculum size and ammonium oxalate were optimized by response surface methodology (RSM). The optimized conditions yielded 21.68 ± 0.76 mg gds⁻¹ of cephamycin C as compared to 10.50 ± 1.04 mg gds⁻¹ before optimization. Effect of various amino acids on cephamycin C production was further studied by using RSM, which resulted in increased yield of 27.41 ± 0.65 mg gds⁻¹.     

In situ recovery of 2,3-butanediol from fermentation by liquid–liquid extraction

End-product conversion, low product concentration and large volumes of fermentation broth, the requirements for large bioreactors, in addition to the high cost involved in generating the steam required to distil fermentation products from the broth largely contributed to the decline in fermentative products. These considerations have motivated the study of organic extractants as a means to remove the product during fermentation and minimize downstream recovery. The aim of this study is to assess the practical applicability of liquid–liquid extraction in 2,3-butanediol fermentations. Eighteen organic solvents were screened to determine their biocompatibility, and bioavailability for their effects on Klebsiella pneumoniae growth. Candidate solvents at first were screened in shake flasks for toxicity to K. pneumoniae. Cell density and substrate consumption were used as measures of cell toxicity. The possibility of employing oleyl alcohol as an extraction solvent to enhance end product in 2,3-butanediol fermentation was evaluated. Fermentation was carried out at an initial glucose concentration of 80 g/l. Oleyl alcohol did not inhibit the growth of the fermentative organism. 2,3-Butanediol production increased from 17.9 g/l (in conventional fermentation) to 23.01 g/l (in extractive fermentation). Applying oleyl alcohol as the extraction solvent, about 68% of the total 2,3-butanediol produced was extracted. An erratum to this article can be found at     

Engineering Clostridium acetobutylicum for production of kerosene and diesel blendstock precursors

Processes for the biotechnological production of kerosene and diesel blendstocks are often economically unattractive due to low yields and product titers. Recently, Clostridium acetobutylicum fermentation products acetone, butanol, and ethanol (ABE) were shown to serve as precursors for catalytic upgrading to higher chain-length molecules that can be used as fuel substitutes. To produce suitable kerosene and diesel blendstocks, the butanol:acetone ratio of fermentation products needs to be increased to 2–2.5:1, while ethanol production is minimized. Here we show that the overexpression of selected proteins changes the ratio of ABE products relative to the wild type ATCC 824 strain. Overexpression of the native alcohol/aldehyde dehydrogenase (AAD) has been reported to primarily increase ethanol formation in C. acetobutylicum. We found that overexpression of the AAD^D485G variant increased ethanol titers by 294%. Catalytic upgrading of the 824(aad^D485G) ABE products resulted in a blend with nearly 50 wt%≤C₉ products, which are unsuitable for diesel. To selectively increase butanol production, C. beijerinckii aldehyde dehydrogenase and C. ljungdhalii butanol dehydrogenase were co-expressed (strain designate 824(Cb ald-Cl bdh)), which increased butanol titers by 27% to 16.9 g L⁻¹ while acetone and ethanol titers remained essentially unaffected. The solvent ratio from 824(Cb ald-Cl bdh) resulted in more than 80 wt% of catalysis products having a carbon chain length≥C₁₁ which amounts to 9.8 g L⁻¹ of products suitable as kerosene or diesel blendstock based on fermentation volume. To further increase solvent production, we investigated expression of both native and heterologous chaperones in C. acetobutylicum. Expression of a heat shock protein (HSP33) from Bacillus psychrosaccharolyticus increased the total solvent titer by 22%. Co-expression of HSP33 and aldehyde/butanol dehydrogenases further increased ABE formation as well as acetone and butanol yields. HSP33 was identified as the first heterologous chaperone that significantly increases solvent titers above wild type C. acetobutylicum levels, which can be combined with metabolic engineering to further increase solvent production.