A biomechanical model of swallowing for understanding the influence of saliva and food bolus viscosity on flavor release

After swallowing a liquid or a semi-liquid food product, a thin film responsible for the dynamic profile of aroma release coats the pharyngeal mucosa. The objective of the present article was to understand and quantify physical mechanisms explaining pharyngeal mucosa coating. An elastohydrodynamic model of swallowing was developed for Newtonian liquids that focused on the most occluded region of the pharyngeal peristaltic wave. The model took lubrication by saliva film and mucosa deformability into account. Food bolus flow rate and generated load were predicted as functions of three dimensionless variables: the dimensionless saliva flow rate, the viscosity ratio between saliva and the food bolus, and the elasticity number. Considering physiological conditions, the results were applied to predict aroma release kinetics.Two sets of conditions were distinguished. The first one was obtained when the saliva film is thin, in which case food bolus viscosity has a strong impact on mucosa coating and on flavor release. More importantly, we demonstrated the existence of a second set of conditions. It was obtained when the saliva film is thick and the food bolus coating the mucosa is very diluted by saliva during the swallowing process and the impact of its viscosity on flavor release is weak. This last phenomenon explains physically in vivo observations for Newtonian food products found in the literature. Moreover, in this case, the predicted thickness of the mix of food bolus with saliva coating the mucosa is approximately of 20 μm; value in agreement with orders of magnitude found in the literature.     

Development and validation of a mastication simulator

More and more research are being done on food bolus formation during mastication. However, the process of bolus formation in the mouth is difficult to observe. A mastication simulator, the Artificial Masticatory Advanced Machine (AM2) was developed to overcome this difficulty and is described here. Different variables can be set such as the number of masticatory cycles, the amplitude of the mechanical movements simulating the vertical and lateral movements of the human lower jaw, the masticatory force, the temperature of the mastication chamber and the injection and the composition of saliva. The median sizes of the particles collected from the food boluses made by the AM2 were compared with those of human boluses obtained with peanuts and carrots as test foods. Our results showed that AM2 mimicked human masticatory behavior, producing a food bolus with similar granulometric characteristics.     

A lubrication analysis of pharyngeal peristalsis: Application to flavour release

After eating a liquid or a semi-liquid food product, a thin film responsible for the dynamic profile of aroma release coats the pharyngeal mucosa. The aim of this article was to analyse the fluid mechanics of pharyngeal peristalsis and to develop a simple biomechanical model in order to understand the role of saliva and food bolus viscosity on the coating of pharyngeal mucosa. We began by analysing the physiology and the biomechanics of swallowing in order to determine relevant model assumptions. This analysis of the literature clarified the types of mechanical solicitations applied on the food bolus. Moreover, we showed that the pharyngeal peristalsis in the most occluded region is equivalent to a forward roll coating process, the originality of which is lubrication by a film of saliva. A model based on the lubrication theory for Newtonian liquids was developed in dimensionless form. The parametric study showed the strong influence of relative saliva thickness on the food bolus coating. A specific experimental device was designed that confirms the model predictions. Two sets of conditions that depend on the relative thickness of saliva were distinguished. The first is characterised by a relatively thin film of saliva: food bolus viscosity has a strong impact on mucosa coating. These phenomena are well represented by the model developed here. The second is obtained when the saliva film is relatively thick: hydrodynamic mixing with saliva, interdiffusion or instabilities may govern mucosa coating. Finally, these results were extrapolated to determine the influence of food bolus viscosity on the dynamic profile of flavour release according to physiological parameters.     

An experimental model to investigate the biomechanical determinants of pharyngeal mucosa coating during swallowing

The development of innovative experimental approaches is necessary to gain insights in the complex biomechanics of swallowing. In particular, unraveling the mechanisms of formation of the thin film of bolus coating the pharyngeal mucosa after the ingestion of liquid or semi-liquid food products is an important challenge, with implication in dysphagia treatment and sensory perceptions.The aim here is to propose an original experimental model of swallowing (i) to simulate the peristaltic motions driving the bolus from the oral cavity to the esophagus, (ii) to mimic and vary complex physiological variables of the pharyngeal mucosa (lubrication, deformability and velocity) and (iii) to measure the thickness and the composition of the coatings resulting from bolus flow. Three Newtonian glucose solutions were considered as model food boli, through sets of experiments covering different ranges of each physiological parameter mimicked.The properties of the coatings (thickness and dilution in saliva film) were shown to depend significantly on the physical properties of food products considered (viscosity and density), but also on physiological variables such as lubrication by saliva, velocity of the peristaltic wave, and to a lesser extent, the deformability of the pharyngeal mucosa.The biomechanical peristalsis simulator developed here can contribute to unravel the determinants of bolus adhesion on pharyngeal mucosa, necessary both for the design of alternative food products for people affected by swallowing disorders, and for a better understanding of the dynamic mechanisms of aroma perception.     

ABILITY OF HAND EVALUATION VERSUS MOUTH EVALUATION TO DIFFERENTIATE TEXTURE OF CHEESE

Hand evaluation and mouth evaluation were compared for texture of cheese. Panelists (n = 11) identified seven mouth terms and five hand terms and developed definitions and standard procedures for evaluation during the course of training. The terms were used to evaluate texture properties of fourteen different types of natural and processed full fat and reduced fat cheeses. Hand and mouth evaluation were able to discriminate cheese texture (P≦0.05). Principal component analysis of data revealed that hand and mouth evaluation differentiated the cheeses in a similar manner. Correlation analysis, factor analysis, and canonical analysis revealed that mouth and hand terms were highly correlated (P≦0.05). Either hand or mouth evaluation can be used to discriminate cheese texture.     

Design and application of a Staphylococcus-specific single strand conformation polymorphism-PCR analysis to monitor Staphylococcus populations diversity and dynamics during production of raw milk cheese

AIM: Development of a nested-PCR single strand conformation polymorphism (SSCP) assay targeting the 16S rRNA genes of the Staphylococcus genus, to monitor staphylococci in cheese. METHODS AND RESULTS: New primer sets to specifically amplify 16S rDNA of staphylococci were designed to be used in a nested-PCR SSCP assay. The method was efficient in discriminating the staphylococcal species most frequently found in cheese. It was validated by monitoring Staphylococcus populations in three productions of raw milk cheese. Analysis of milk samples revealed dominant SSCP peaks corresponding to Staphylococcus aureus, Staphylococcus equorum and Staphylococcus saprophyticus. After 12 h, the S. aureus peak became dominant. CONCLUSIONS: The combination of specific Staphylococcus nested-PCR and SSCP allows rapid and direct monitoring of staphylococci diversity and dynamics in milk and cheese. In the core of the cheeses studied, S. aureus may have ecological advantages against other Staphylococcus populations. SIGNIFICANCE AND IMPACT OF THE STUDY: This approach is a promising tool to study the ecology of staphylococci in cheeses and in other food samples.     

Winter feeding systems and dairy cow breed have an impact on milk composition and flavour of two Protected Designation of Origin French cheeses

This study investigates the effects of two feeding systems and two dairy cow breeds on milk yield and composition, physical and sensorial properties of Camembert and Pont-l’Evêque cheeses. The experiment consisted of a 2 × 2 factorial arrangement of treatments. A low energy grass diet with only 15% of concentrate (LowGS) was compared with a high-energy maize silage diet with 30% concentrate (HighMS). Thirty-four Holstein (Ho) and 34 Normande (No) cows in early lactation were assigned to one of two feeding systems for a 6-week period. Cows on the LowGS feeding system had lower milk yield, fat and protein content. In both feeding systems, No cows had lower milk yields but higher milk protein contents than Ho cows. The LowGS feeding system altered milk fatty acid (FA) composition by reducing saturated FA. Breed had only a small impact on milk FA. Concerning milk coagulating properties, only the firmness was reduced by the LowGS feeding and the Ho breed. The effects of breed and feeding system on the protein content of cheeses were more marked in Camembert cheese than in Pont-l’Evêque cheese. However, the Camembert cheese from Ho-LowGS was, in fact, characterized especially by lower protein content. LowGS feeding system and No breed produced more yellow cheeses. Feeding systems had limited effects on the firmness of Camembert and Pont-l’Evêque cheeses measured by penetrometry. In sensory analysis, Ho breed and LowGS feeding produced a Camembert cheese with a more melting texture in the mouth due to the increase of spreadability index and of proteolysis. The type of cheese also had an influence: the effects were more important on Camembert cheese than on Pont-l’Evêque cheese. Only the Ho-LowGS treatment produced a very specific Camembert cheese different from the others. The feeding systems and breed of dairy cow have no determinant effect on PDO (protected designation of origin) Camembert and Pont-l’Evêque cheeses, especially regarding taste. In this kind of trial, despite the effects of feeding systems and breed on milk composition, the role of cheese ripening and microbiology appears to be of considerable importance.     

Predictive formulae for goat cheese yield based on milk composition

Prediction of the yield and quality of different types of cheeses that could be produced from a given type and/or amount of goat milk is of great economic benefit to goat milk producers and goat cheese manufacturers. Bulk tank goat milk was used for manufacturing hard, semi-hard and soft cheeses (N = 25, 25 and 24, respectively) to develop predictive formulae of cheese yield based on milk composition. Fat, total solids, total protein and casein contents in milk and moisture-adjusted cheese yield were determined to establish relationships between milk composition and cheese yield. Soft, semi-hard and hard cheeses in this study had moisture contents of 66, 46 and 38%, respectively, which could be used as reference standards. In soft cheese, individual components of goat milk or a combination of two or three components predicted cheese yield with a reasonably high correlation coefficient (R² = 0.73–0.81). However, correlation coefficients of predictions were lower for both semi-hard and hard cheeses. Overall, total solids of goat milk was the strongest indicator of yield in all three types of cheeses, followed by fat and total protein, while casein was not a good predictor for both semi-hard and hard cheeses. When compared with moisture-adjusted cheese yield, there was no difference (P > 0.05) in predicting yield of semi-hard and hard goat milk cheeses between the developed yield formulae in this study and a standard formula (the Van Slyke formula) commonly used for cow cheese. Future research will include further validation of the yield predictive formulae for hard and semi-hard cheeses of goat milk using larger data sets over several lactations, because of variation in relationships between milk components due to breed, stage of lactation, season, feeding regime, somatic cell count and differences in casein variants.     

Cooperation between Lactococcus lactis and nonstarter lactobacilli in the formation of cheese aroma from amino acids

In Gouda and Cheddar type cheeses the amino acid conversion to aroma compounds, which is a major process for aroma formation, is essentially due to lactic acid bacteria (LAB). In order to evaluate the respective role of starter and nonstarter LAB and their interactions in cheese flavor formation, we compared the catabolism of phenylalanine, leucine, and methionine by single strains and strain mixtures of Lactococcus lactis subsp. cremoris NCDO763 and three mesophilic lactobacilli. Amino acid catabolism was studied in vitro at pH 5.5, by using radiolabeled amino acids as tracers. In the presence of alpha-ketoglutarate, which is essential for amino acid transamination, the lactobacillus strains degraded less amino acids than L. lactis subsp. cremoris NCDO763, and produced mainly nonaromatic metabolites. L. lactis subsp. cremoris NCDO763 produced mainly the carboxylic acids, which are important compounds for cheese aroma. However, in the reaction mixture containing glutamate, only two lactobacillus strains degraded amino acids significantly. This was due to their glutamate dehydrogenase (GDH) activity, which produced alpha-ketoglutarate from glutamate. The combination of each of the GDH-positive lactobacilli with L. lactis subsp. cremoris NCDO763 had a beneficial effect on the aroma formation. Lactobacilli initiated the conversion of amino acids by transforming them mainly to keto and hydroxy acids, which subsequently were converted to carboxylic acids by the Lactococcus strain. Therefore, we think that such cooperation between starter L. lactis and GDH-positive lactobacilli can stimulate flavor development in cheese.     

COMPARISONS OF VOLATILE COMPOUNDS RELEASED DURING CONSUMPTION OF A COMPLEX FOOD BY DIFFERENT ASSESSORS WITH EXPRESSIONS OF PERCEIVED FLAVOR DETERMINED BY FREE CHOICE PROFILING

Comparisons of volatile compounds released during consumption by different assessors with individual differences in the assessors'chewing patterns, saliva production rates and ultimately their expressions of perceived flavor have received little research attention to date, although such comparisons are fundamental to the understanding of flavor. To address this, eight untrained assessors were chosen and each consumed six Cheddar cheeses during Buccal Headspace Analysis of the volatile compounds released, while in parallel measures of each assessor's mastication behavior using Electromyography, their stimulated saliva production during consumption and their sensory perceptions of the cheeses flavor during Free Choice Profiling were determined. Relationships between the volatile compounds released and the sensory and physiological measures were investigated using Principal Components Analysis, Generalised Procrustes Analysis and Partial Least Squares regression. It was found that although there were differences between assessors'mastication behavior and saliva production rates, the assessors'individual volatile profiles obtained by Buccal Headspace Analysis were similar for each cheese examined. Also, Partial Least Squares was successful in predicting the most important flavor differences between cheeses from the volatile compounds released during their consumption by different assessors.     

In vitro study of the influence of physiological parameters on dynamic in-mouth flavour release from liquids

Influences of shear rate (surface extension), airflow, in-mouth headspace volume, synthetic saliva and human epithelial cells (modelling mucosa) on the initial dynamic flavour release from liquids were analysed. Simulating physiological mouth parameters, initial dynamic flavour release experiments over a time period of 30 s were carried out using a proven mouth model apparatus. Flavour compounds of different chemical classes were dissolved in water or in aqueous starch hydrolysate in concentrations typically present in food ( micro g/l to mg/l). Forced by increasing shear rates the enlargement of the gas-liquid interface (vortex formation) caused an increased release of flavour molecules. The release of less soluble compounds was reduced by increasing shear forces due to an improved dissolution. Increasing volumetric airflow rates resulted generally in higher release rates and in a change of pattern of release kinetics. Maximum flavour release was found at a ratio of 1:1 for in-mouth headspace and liquid volume. Neither addition of saliva alone nor the combination of saliva and mucosa showed significant influence on in-mouth flavour release from liquids in the model mouth.     

Thermally-dried free and immobilized kefir cells as starter culture in hard-type cheese production

In an attempt to seek for suitable dried cultures, thermally-dried kefir was employed as starter in hard-type cheese production and tested in cheeses ripened at 5, 18 and 22 °C. Both free and immobilised on casein kefir cells were used and compared to cheese made without starter culture. Cheese products made with free cells of kefir culture were characterized by longer preservation time, improved aroma, taste, texture characteristics and increased degree of openness. Volatile profiles obtained by GC/MS analysis revealed a 216% increase in total concentration of esters, organic acids, alcohols and carbonyl compounds between cheeses prepared with and without kefir culture.     

Identification of the possible new odor-active compounds “12-methyltridecanal and its analogs” responsible for the characteristic aroma of ripe Gouda-type cheese

The aroma concentrates of the three maturation stages of Gouda-type cheeses were prepared by combining the solvent extraction and the solvent assisted flavor evaporation techniques. The aroma extract dilution analysis applied to the volatile fraction revealed 31 odorants that were identified or tentatively identified from the 38 odor-active peaks with FD factors between 4³ and 4⁸. By comparison with the FD factors in the three maturation stages of the cheeses, 16 odorants, including 12-methyltridecanal, which is a newly identified odorant from the cheese, increased with the increasing maturation stage of the cheese. In addition, many iso- and anteiso-methyl-branched long-chain aliphatic aldehydes could be identified as the analogs of 12-methyltridecanal, which have a unique odor note. It may be then expected that these aldehydes were able to influence the flavor of the highly ripened Gouda cheese, since these compounds also increased with the increasing maturation stage.     

Viability and contribution to proteolysis of an adjunct culture of Lactobacillus plantarum in two model cheese systems: cheddar cheese-type and soft-cheese type

Aims:  The influence of the cheese-making process, ripening conditions and primary starter on the viability and proteolytic activity of an adjunct culture of Lactobacillus plantarum I91 was assessed in two miniature cheese models, representative of Cremoso Argentino and Cheddar cheeses.
Methods and Results:  Cheeses with and without adjunct culture were made under controlled microbiological conditions and sampled during ripening for physicochemical and microbiological analyses. The addition of lactobacilli neither contributed to acid production nor caused changes to the composition of the cheeses. The strain studied exhibited good development and survival and showed a similar growth pattern in both cheese matrices. The adjunct culture caused changes to secondary proteolysis of both cheese types, which were evidenced by modification of peptide profiles and the increase in the levels of some individual amino acids as well as the total content of free amino acids. The changes observed were consistent with the acceleration of proteolysis in the two cheese models assayed.
Conclusion:  Lactobacillus plantarum I91 has desirable and robust technological properties, which makes it a suitable adjunct culture for cheese-making.
Significance and Impact of the Study:  Other cultures and environmental conditions prevailing in the food may affect the viability of adjunct cultures and its biochemical activities; this is the first report describing the successful performance of an adjunct culture of Lact. plantarum I91 in two different model cheese systems.     

Cooperation between Lactococcus lactis and Nonstarter Lactobacilli in the Formation of Cheese Aroma from Amino Acids

In Gouda and Cheddar type cheeses the amino acid conversion to aroma compounds, which is a major process for aroma formation, is essentially due to lactic acid bacteria (LAB). In order to evaluate the respective role of starter and nonstarter LAB and their interactions in cheese flavor formation, we compared the catabolism of phenylalanine, leucine, and methionine by single strains and strain mixtures of Lactococcus lactis subsp. cremoris NCDO763 and three mesophilic lactobacilli. Amino acid catabolism was studied in vitro at pH 5.5, by using radiolabeled amino acids as tracers. In the presence of α-ketoglutarate, which is essential for amino acid transamination, the lactobacillus strains degraded less amino acids than L. lactis subsp. cremoris NCDO763, and produced mainly nonaromatic metabolites. L. lactis subsp. cremoris NCDO763 produced mainly the carboxylic acids, which are important compounds for cheese aroma. However, in the reaction mixture containing glutamate, only two lactobacillus strains degraded amino acids significantly. This was due to their glutamate dehydrogenase (GDH) activity, which produced α-ketoglutarate from glutamate. The combination of each of the GDH-positive lactobacilli with L. lactis subsp. cremoris NCDO763 had a beneficial effect on the aroma formation. Lactobacilli initiated the conversion of amino acids by transforming them mainly to keto and hydroxy acids, which subsequently were converted to carboxylic acids by the Lactococcus strain. Therefore, we think that such cooperation between starter L. lactis and GDH-positive lactobacilli can stimulate flavor development in cheese.     

Microbiological profile in Serra ewes' cheese during ripening

The microflora of Serra cheese was monitored during a 35 d ripening period at three different periods within the ewe's lactation season. After 7 d ripening, the numbers of micro-organisms reached their maximum, and lactic acid bacteria (LAB) and coliforms were the predominant groups. Pseudomonads were not detected after 1 week of ripening. At all stages of ripening, cheeses manufactured in spring exhibited the lowest numbers of LAB and yeasts, whereas cheeses manufactured in winter showed the lowest numbers of coliforms and staphylococci.
Leuconostoc lactis was the most abundant LAB found in Serra cheese whereas Enterococcus faecium and Lactococcus lactis spp. lactis exhibited the highest decrease in percentage composition. Numbers of both Leuc. mesenteroides and Lactobacillus paracasei tended to increase throughout ripening. The most abundant coliform was Hafnia alvei. Klebsiella oxytoca was found in curd but declined in number during ripening. Staphylococcal flora of curd was mainly composed of Staphylococcus xylosus, Staph. aureus and Staph. epidermidis. Staphylococcus xylosus was the major species found at the end of ripening. Pseudomonas fluorescens , was the only Pseudomonas species isolated from the curd. Although a broad spectrum of yeasts were found in Serra cheese, Sporobolomyces roseus was the most abundant yeast isolated.