Modeling zigzag CNT: dependence of structural and electronic properties on length,and application to encapsulation of HCN and C<Subscript>2</Subscript>H<Subscript>2</Subscript>

Density functional theory (B3LYP, B3LYP-D2 and wB97XD functionals) was used in finite models of zigzag carbon nanotubes (CNT), (n,0)×k with n?=?6–9 and k?=?2–4, to systematically investigate the effects of size on their structural and electronic properties. We found that the ratio between the length (L _t) and the diameter (d _t) of the pristine CNT has to be larger than 2, i.e., L _t/d _t?>?2, in order to provide the observed experimental trends of C=C bond distances, as well as to maintain the atomic charges nearly constant and zero around the center of the tube. Therefore, the concepts of useful length and volume were developed and tested for the encapsulation process of HCN and C₂H₂ into CNTs. The energies involved in these processes, as well as the changes in molecular structure and electronic properties of the dopants and the CNTs are discussed and rationalized by the amount of charge transferred between dopant and CNT.

Open image in new window

Graphical Abstract Illustration of zigzag CNT length and diameter ratio in order to represent C=C bond experimental trend

     

Bonding,aromaticity, and planar tetracoordinated carbon in Si<Subscript>2</Subscript>CH<Subscript>2</Subscript> and Ge<Subscript>2</Subscript>CH<Subscript>2</Subscript>

Natural bond orbital (NBO) analyses and dissected nucleus-independent chemical shifts (NICS _{π z z} ) were computed to evaluate the bonding (bond type, electron occupation, hybridization) and aromatic character of the three lowest-lying Si₂CH₂ (1-Si, 2-Si, 3-Si) and Ge₂CH₂ (1-Ge, 2-Ge, 3-Ge) isomers. While their carbon C₃H₂ analogs favor classical alkene, allene, and alkyne type bonding, these Si and Ge derivatives are more polarizable and can favor “highly electron delocalized”? and “non-classical”? structures. The lowest energy Si ₂CH₂ and Ge ₂CH₂ isomers, 1-Si and 1-Ge, exhibit two sets of 3–center 2–electron (3c-2e) bonding; a π-3c-2e bond involving the heavy atoms (C–Si–Si and C–Ge–Ge), and a σ-3c-2e bond (Si–H–Si, Ge–H–Ge). Both 3-Si and 3-Ge exhibit π and σ-3c-2e bonding involving a planar tetracoordinated carbon (ptC) center. Despite their highly electron delocalized nature, all of the Si₂CH₂ and Ge₂CH₂ isomers considered display only modest two π electron aromatic character (NICS(0) _{π z z} =--6.2 to –8.9 ppm, computed at the heavy atom ring center) compared to the cyclic-C ₃H₂ (–13.3 ppm).

Open image in new window

Graphical Abstract The three lowest Si2CH2 and Ge2CH2 isomers.

     

BODIPY for photodynamic therapy applications: computational study of the effect of bromine substitution on <Superscript>1</Superscript>O<Subscript>2</Subscript> photosensitization

Density functional theory and its time-dependent extension (DFT, TDDFT) were employed to establish the feasibility of using a series of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacenes (BODIPYs) in photodynamic therapy. Their absorption electronic spectra, singlet–triplet energy gaps, and spin–orbit matrix elements were computed and are discussed here. The effects of bromine substitution on the photophysical properties of BODIPY were elucidated. The investigated compounds were found to possess different excited triplet states that lie below the energy of the bright excited singlet state (S₁ or S₂), depending on the positions occupied by the bromine atoms. The computed spin–orbit matrix elements for the radiationless intersystem crossing S_n?→ ?T_m and the relative singlet–triplet energy gaps allowed the prediction of plausible nonradiative decay pathways for the production of singlet excited molecular oxygen, the key cytotoxic agent in photodynamic therapy.

Open image in new window

Graphical Abstract The photophysical properties affected by the presence of bromine atoms in different positions of a BODIPY core have been here elucidated. In particular it has been found that SOC values strongly depend on the position of heavy atoms into the BODIPY core, suggesting positions 1 and 7 as the best ones to enhance the ISC kinetics

     

Architectures,electronic structures,and stabilities of Cu-doped Ge<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> clusters: density functional modeling

The present study reports the geometries, electronic structures, growth behavior, and stabilities of neutral and ionized copper-doped germanium clusters containing 1–20 Ge atoms within the framework of linear combination of atomic orbitals density functional theory (DFT) under the spin-polarized generalized gradient approximation. It was found that Cu-capped Ge _n (or Cu-substituted Ge _n+1) and Cu-encapsulated Ge _n clusters mostly occur in the ground state at a particular cluster size (n). In order to explain the relative stabilities of the ground-state clusters, parameters such as the average binding energy per atom (BE), the embedding energy (EE), and the fragmentation energy (FE) of the clusters were calculated, and the resulting values are discussed. To explain the chemical stabilities of the clusters, parameters such as the energy gap between the highest occupied and the lowest unoccupied molecular orbitals (the HOMO–LUMO gap), the ionization energy (IP), the electron affinity (EA), the chemical potential (μ), the chemical hardness (η), and the polarizability were calculated, and the resulting values are also discussed. Natural atomic orbital (NAO) and natural bond orbital (NBO) analyses were also used to determine the electron-counting rule that should be applied to the most stable Ge₁₀Cu cluster. Finally, the relevance of the calculated results to the design of Ge-based superatoms is discussed.

Open image in new window Open image in new window

Figure Contributions of the valance orbitals of the Ge and Cu atom(s) to the HOMO of the ground-state icosahedral Ge₁₀Cu cluster obtained from NBO analysis. The numbers below the clusters represent the occupancies of the HOMO orbitals

     

Effects of the adsorption of alkali metal oxides on the electronic,optical, and thermodynamic properties of the Mg<Subscript>12</Subscript>O<Subscript>12</Subscript>nanocage: a density functional theory study

The effect of alkali metal oxides M _n O (M?=?Li, Na, K; n?=?2, 3, 4) on the geometric, electronic, and linear and nonlinear optical properties of the Mg₁₂O₁₂ nanocage was investigated by density-functional-based methods. According to the computational results, these alkali metal oxides are adsorbed on the Mg₁₂O₁₂ nanocage because this adsorption reduces its energy gap. The static first hyperpolarizability (β ₀) of the nanocage is dramatically increased in the presence of the alkali metal oxides, with the greatest increase seen in the presence of the superalkalis (i.e., M₃O; M?=?Li, Na, and K). The highest first hyperpolarizability (β ₀?≈?600,000 a.u.) was calculated for K₃O@Mg₁₂O₁₂, which was considerably more than that for Mg₁₂O₁₂. The thermodynamic properties and relative stabilities of these inorganic compounds are discussed.

Open image in new window

Graphical Abstract Optimized structure and DOS spectrum of K₃O(e@Mg₁₂O₁₂)

     

Theoretical study of the H + HCN → H + HNC process

We present a theoretical study on the detailed mechanism and kinetics of the H+HCN →H+HNC process. The potential energy surface was calculated at the complete basis set quantum chemical method, CBS-QB3. The vibrational frequencies and geometries for four isomers (H₂CN, cis-HCNH, trans-HCNH, CNH₂), and seven saddle points (TSn where n = 1 ? 7) are very important and must be considered during the process of formation of the HNC in the reaction were calculated at the B3LYP/6-311G(2d,d,p) level, within CBS-QB3 method. Three different pathways (PW1, PW2, and PW3) were analyzed and the results from the potential energy surface calculations were used to solve the master equation. The results were employed to calculate the thermal rate constant and pathways branching ratio of the title reaction over the temperature range of 300 up to 3000 K. The rate constants for reaction H + HCN → H + HNC were fitted by the modified Arrhenius expressions. Our calculations indicate that the formation of the HNC preferentially occurs via formation of cis–HCNH, the fitted expression is k _{P W2}(T) = 9.98 × 10^?22 T ^2.41 exp(?7.62 kcal.mol^?1/R T) while the predicted overall rate constant k _{O v e r a l l} (T) = 9.45 × 10^?21 T ^2.15 exp(?8.56 kcal.mol^?1/R T) in cm ³ molecule ^?1 s ^?1.

Open image in new window

Graphical Abstract (a) Potential energy surface, (b) thermal rate constants as a function of temperature and (c) the branching ratios (%) of PW1, PW2, PW3 pathways involved in rm H + HCN → H + HNC process.

     

Cloning of <Emphasis Type="Italic">rec</Emphasis>A gene of <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> and phenotypic complementation of <Emphasis Type="Italic">Escherichia coli</Emphasis> recombinant deficient strain

Nucleotide and amino acid sequences of Corynebacterium glutamicum recA genes, from GenBank, were compared in silico. On the basis of the identity found between sequences, two degenerate primers were designed on the two sides of the deduced open reading frame (ORF) of the recA gene. PCR experiments, for amplifying the recA ORF region, were done. pGEM^®-T Easy vector was selected to be used for cloning PCR products. Then recA ORF was placed under the control of Escherichia coli hybrid trc promoter, in pKK388-1 vector. pKK388-1 vector, containing recA ORF, was transformed to E. coli DH5α ΔrecA (recombinant deficient strain), in an attempt to phenotypically complement it. Ultraviolet (u.v.) exposure experiments of the transformed and non-transformed E. coli DH5α ΔrecA cells revealed tolerance of transformed cells up to dose 0.24 J/cm², while non-transformed cells tolerated only up to dose 0.08 J/cm². It is concluded that phenotypic complementation of E. coli DH5α ΔrecA with recA ORF of C. glutamicum, could be achieved and RecA activity could be restored.     

Computational design of zinc-ion-responsive two-photon fluorescent probes with conjugated multi-structures

A series of conjugated multi-structured fluorescent probe molecules based on a salen ligand were designed and investigated in dimethyl sulfoxide solvent using a quantum-chemical method. The results indicate that the one-photon absorption and fluorescence emission spectra (λ ^O and λ ^EM) of these molecules generally show redshifts (of 23.1–74.5 and 22.7–116.6 nm, respectively) upon the coordination of the molecules to Zn²⁺. Large Stokes shifts (1511.2–11744.1 cm^?1) were found for the molecules, meaning that interference between λ ^O and λ ^EM can be avoided for these molecules. The two-photon absorption spectra of the molecules usually present blueshifts, but the two-photon absorption cross-section (δ) greatly increases (by 221.5–868.0 GM) upon the coordination of the molecules with Zn²⁺. Most of the molecules show strong two-photon absorption peaks in the range 678.2–824.4 nm, i.e., in the near-infrared region. In a word, the expanded π-conjugated frameworks of these molecules lead to redshifted λ ^O and λ ^EM and enhanced δ values. Moreover, (L-phenyl)?₂ and (L-phenyl-ethynyl)₂ are the most suitable of the multi-structured molecules examined in this work for use as two-photon fluorescent probes for zinc ion detection in vivo.

Open image in new window

Graphical Abstract Scheme of the calculated transition energies (E_0k and E_0n) and the transition dipole moments (M_0k and M_kn). NTO 109, NTO 197 and NTO 228 of Zn(L-phenyl-ethynyl), Zn₂(L-phenyl-ethynyl)₂ and Zn₃(L-phenyl)₃ for one-photon  absorption, respectively.

     

Performance of wave function and density functional methods for water hydrogen bond spin–spin coupling constants

Spin–spin coupling constants in water monomer and dimer have been calculated using several wave function and density functional-based methods. CCSD, MCSCF, and SOPPA wave functions methods yield similar results, specially when an additive approach is used with the MCSCF. Several functionals have been used to analyze their performance with the Jacob’s ladder and a set of functionals with different HF exchange were tested. Functionals with large HF exchange appropriately predict ¹ J _{O H} , ² J _{H H} and ^2h J _{O O} couplings, while ^1h J _{O H} is better calculated with functionals that include a reduced fraction of HF exchange. Accurate functionals for ¹ J _{O H} and ² J _{H H} have been tested in a tetramer water model. The hydrogen bond effects on these intramolecular couplings are additive when they are calculated by SOPPA(CCSD) wave function and DFT methods.

Open image in new window

Graphical Abstract Evaluation of the additive effect of the hydrogen bond on spin-spin coupling constants of water using WF and DFT methods.

     

Interactions of selected indole derivatives with phospholipase A<Subscript>2</Subscript>: <Emphasis Type="Italic">in silico and in vitro</Emphasis> analysis

Phospholipase A2 (PLA₂) is one of the key enzymes involved in the formation of inflammatory mediators. Inhibition of PLA₂ is considered to be one of the efficient methods to control inflammation. In silico docking studies of 160 selected indole derivatives performed against porcine pancreatic PLA₂ (ppsPLA₂) suggested that, CID2324681, CID8617 (indolebutyric acid or IBA), CID22097771 and CID802 (indoleacetic acid or IAA) exhibited highest binding energies. In silico analysis was carried out to predict some of the ADME properties. The binding potential of these compounds with human non pancreatic secretory PLA₂ (hnpsPLA₂) was determined using molecular docking studies. In order to corroborate the in silico results, enzyme kinetics and isothermal titration calorimetric analysis of the two selected compounds, IAA and IBA were performed against ppsPLA₂. From the analysis, it was concluded that IAA and IBA can act as competitive inhibitors to the enzyme and may be used as anti inflammatory agents.

Open image in new window

Figure Inhibitory activity of IAA and IBA against PLA₂

     

Interactions of acylated methylglucoside derivatives with CO<Subscript>2</Subscript>: simulation and calculations

Carbohydrates have drawn considerable interest from researchers recently due to their affinity for CO₂. However, most of the research in this field has focused on peracetylated derivatives. Compared with acetylated carbohydrates, which have already been studied in depth, methyl d-glucopyranoside derivatives are more stable and could have additional applications. Thus, in the present work, ab initio calculations were performed to elucidate the characteristics of the interactions of methylglucoside derivatives with CO₂, and to investigate how the binding energy (ΔE) is affected by isomerization or the introduction of various acyl groups. Four methyl d-glucopyranosides (each with two anomers) bearing acetyl, propionyl, butyryl, and isobutyryl moieties, respectively, were designed as substrates, and the 1:1 complexes of a CO₂ molecule with each of these sugar substrates were modeled. The results indicate that ΔE is mainly influenced by interaction distance and the number of negatively charged donors or interacting pairs in the complex; the structure of the acyl group present in the substrate is a secondary influence. Except in the case of methyl 2-O-acetyl-d-glucopyranose, the ΔE values of the α- and β-anomers of each methylglucoside were found to be almost the same. Therefore, we would expect the CO₂ affinities of the four derivatives studied here to be as strong as or even stronger than that of peracetylated d-glucopyranose.

Open image in new window

Graphical Abstract The binding energy between methyl d-glucopyranoside derivatives with various substituted acyl groups and CO₂ are evaluated by ab initio calculations. The strong interaction between these methyl dglucopyranoside derivatives and CO₂ showed the potential of their application for CO₂ capture

     

Impact of elevated CO<Subscript>2</Subscript> in <Emphasis Type="Italic">Casuarina equisetifolia</Emphasis> rooted stem cuttings inoculated with <Emphasis Type="Italic">Frankia</Emphasis>

Impact of different levels of elevated CO ₂ on the activity of Frankia (Nitrogen-fixing actinomycete) in Casuarina equisetifolia rooted stem cuttings has been studied to understand the relationship between C. equisetifolia, Frankia and CO₂. The stem cuttings of C. equietifolia were collected and treated with 2000 ppm of Indole Butyric Acid (IBA) for rooting. Thus vegetative propagated rooted stem cuttings of C. equisetifolia were inoculated with Frankia and placed in the Open top chambers (OTC) with elevated CO₂ facilities. These planting stocks were maintained in the OTC for 12 months under different levels of elevated CO₂ (ambient control, 600 ppm, 900 ppm). After 12 months, the nodule numbers, bio mass, growth, and photosynthesis of C. equisetifolia rooted stem cuttings inoculated with Frankia were improved under 600 ppm of CO₂. The rooted stem cuttings of C. equisetifolia inoculated with Frankia showed a higher number of nodules under 900 ppm of CO₂ and cuttings without Frankia inoculation exhibited poor growth. Tissue Nitrogen (N) content was also higher under 900 ppm of CO₂ than ambient control and 600 ppm levels. The photosynthetic rate was higher (17.8 μ mol CO₂ m^?2 s^?1) in 900 ppm of CO₂ than in 600 ppm (13.2 μ mol CO₂ m^?2 s^?1) and ambient control (8.3 μ mol CO₂ m^?2 s^?1). This study showed that Frankia can improve growth, N fixation and photosynthesis of C. equietifolia rooted stem cuttings under extreme elevated CO₂ level conditions (900 ppm).     

Docking-assisted 3D-QSAR studies on xanthones as <Emphasis Type="Italic">α</Emphasis>-glucosidase inhibitors

Recently, a series of xanthone analogues has been identified as α-glucosidase inhibitors. To provide deeper insight into the three-dimensional (3D) structural requirements for the activities of these molecules, CoMFA and CoMSIA approaches were employed on 54 xanthones to construct 3D-QSAR models. Their bioactive conformations were first investigated by docking studies and optimized by subsequent molecular dynamics (MD) simulations using the homology modeled structure of the target protein. Based on the docking/MD-determined conformers, 3D-QSAR studies generated several significant models in terms of 47 molecules as the training set. The best model (CoMSIA-SHA) yielded q ² of 0.713, r ² of 0.967 and F of 140.250. The robustness of the model was further externally confirmed by a test set of the remaining molecules (q ² = 0.793, r ² = 0.902, and k = 0.905). Contour maps provided much information for future design and optimization of new compounds with high inhibitory activities towards α-glucosidase.

Open image in new window

Graphical Abstract CoMSIA/SHA contour map of xanthone α-glucosidase inhibitor

     

The nitrite reductase activity of horse heart carboxymethylated-cytochrome <Emphasis Type="Italic">c</Emphasis> is modulated by cardiolipin

Horse heart carboxymethylated cytc (CM-cytc) displays myoglobin-like properties. Here, the effect of cardiolipin (CL) liposomes on the nitrite reductase activity of ferrous CM-cytc [CM-cytc-Fe(II)], in the presence of sodium dithionite, is reported between pH 5.5 and 7.6, at 20.0 °C. Cytc-Fe(II) displays a very low value of the apparent second-order rate constant for the NO₂ ^?-mediated conversion of cytc-Fe(II) to cytc-Fe(II)-NO [k _on = (7.3 ± 0.7) × 10^?2 M^?1 s^?1; at pH 7.4], whereas the value of k _on for NO₂ ^? reduction by CM-cytc-Fe(II) is 1.1 ± 0.2 M^?1 s^?1 (at pH 7.4). CL facilitates the NO₂ ^?-mediated nitrosylation of CM-cytc-Fe(II) in a dose-dependent manner, the value of k _on for the NO₂ ^?-mediated conversion of CL–CM-cytc-Fe(II) to CL–CM-cytc-Fe(II)-NO (5.6 ± 0.6 M^?1 s^?1; at pH 7.4) being slightly higher than that for the NO₂ ^?-mediated conversion of CL–cytc-Fe(II) to CL–cytc-Fe(II)-NO (2.6 ± 0.3 M^?1 s^?1; at pH 7.4). The apparent affinity of CL for CM-cytc-Fe(II) is essentially pH independent, the average value of B being (1.3 ± 0.3) × 10^?6 M. In the absence and presence of CL liposomes, the nitrite reductase activity of CM-cytc-Fe(II) increases linearly on lowering pH and the values of the slope of the linear fittings of Log k _on versus pH are ?1.05 ± 0.07 and ?1.03 ± 0.03, respectively, reflecting the involvement of one proton for the formation of the transient ferric form, NO, and OH^?. These results indicate that Met80 carboxymethylation and CL binding cooperate in the stabilization of the highly reactive heme-Fe atom of CL–CM-cytc.     

Single point mutations enhance activity of <Emphasis Type="Italic">cis</Emphasis>-epoxysuccinate hydrolase

Objectives

To enhance activity of cis-epoxysuccinate hydrolase from Klebsiella sp. BK-58 for converting cis-epoxysuccinate to tartrate.

Results

By semi-saturation mutagenesis, all the mutants of the six important conserved residues almost completely lost activity. Then random mutation by error-prone PCR and high throughput screening were further performed to screen higher activity enzyme. We obtained a positive mutant F10D after screening 6000 mutations. Saturation mutagenesis on residues Phe10 showed that most of mutants exhibited higher activity than the wild-type, and the highest mutant was F10Q with activity of 812 U mg^?1 (k _cat /K _m , 9.8 ± 0.1 mM^?1 s^?1), which was 230 % higher than that of wild-type enzyme 355 U mg^?1 (k _cat /K _m , 5.3 ± 0.1 mM^?1 s^?1). However, the thermostability of the mutant F10Q slightly decreased.

Conclusions

The catalytic activity of a cis-epoxysuccinate hydrolase was efficient improved by a single mutation F10Q and Phe10 might play an important role in the catalysis.

     

Magnetophoretic harvesting of freshwater microalgae using polypyrrole/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite and its reusability

A magnetophoretic harvesting agent, a polypyrrole/Fe₃O₄ magnetic nanocomposite, is proposed as a cost and energy efficient alternative to recover biomass of the microalgae Botryococcus braunii, Chlorella protothecoides, and Chlorella vulgaris from their culture media. The maximal recovery efficiency reached almost 99 % for B. braunii, 92.4 % for C. protothecoides, and 90.8 % for C. vulgaris. The maximum adsorption capacity (Q ₀) of the magnetic nanocomposite for B. braunii (63.49 mg dry biomass mg^?1 PPy/Fe₃O₄) was higher than that for C. protothecoides (43.91 mg dry biomass mg^?1 PPy/Fe₃O₄) and C. vulgaris (39.98 mg dry biomass mg^?1 PPy/Fe₃O₄). The highest harvesting efficiency for all the studied microalgae were at pH 10.0, and measurement of zeta-potential confirmed that the flocculation was induced by charge neutralization. This study showed that polypyrrole/Fe₃O₄ can be a promising flocculant due to its high efficacy, low dose requirements, short settling time, its integrity with cells, and with great potential for saving energy because of its recyclability.     

Feruloyl esterase from <Emphasis Type="Italic">Alternaria tenuissima</Emphasis> that hydrolyses lignocellulosic material to release hydroxycinnamic acids

An extracellular feruloyl esterase from the culture filtrates of the isolated fungus Alternaria tenuissima was successfully purified to apparent homogeneity by anion-exchange and size-exclusion chromatography. Peptide fragments of purified enzyme (designated as AltFAE; molecular weight of 30.3 kDa determined by SDS-PAGE) were identified by mass spectrometry using a NanoLC-ESI-MS/MS system. Michaelis-Menten constants (K_M) and catalytic efficiencies (k_cat/K_M) were determined for typical substrates of feruloyl esterase, and the lowest K_M of 50.6 μM (i.e., the highest affinity) and the highest k_cat/K_M (3.1 × 10⁵ s^—1 M^–1) were observed for methyl ^p-coumarate and methyl ferulate, respectively. Not least, AltFAE catalyzed conversion of lignocellulosic material (e.g. wood meal) to release hydroxycinnamic products, i.e. ferulic- and ^p-coumaric acids.     

Gas exchanges of an endangered species <Emphasis Type="Italic">Syringa pinnatifolia</Emphasis> and a widespread congener <Emphasis Type="Italic">S. oblata</Emphasis>

Net photosynthetic rate (P_N), transpiration rate (E), water use efficiency (WUE), stomatal conductance (g_s), and stomatal limitation (L_s) were investigated in two Syringa species. The saturation irradiance (SI) was 400 µmol m^-2s^-1 for S. pinnatifolia and 1 700 µmol m^-2s^-1 for S. oblata. Compared with S. oblata, S. pinnatifolia had extremely low g _s . Unlike S. oblata, the maximal photosynthetic rate (P_max) in S. pinnatifoliaoccurred around 08:00 and then fell down, indicating this species was sensitive to higher temperature and high photosynthetic photon flux density. However, such phenomenon was interrupted by the leaf development rhythms before summer. A relatively lower P_N together with a lower leaf area and shoot growth showed the capacity for carbon assimilation was poorer in S. pinnatifolia.