Immobilization of -glucose oxidase onto a hydrogen peroxide permselective membrane and application for an enzyme electrode

A hydrogen peroxide permselective membrane with asymmetric structure was prepared and -glucose oxidase (EC 1.1.3.4) was immobilized onto the porous layer. The activity of the immobilized -glucose oxidase membrane was 0.34 units cm⁻² and the activity yield was 6.8% of that of the native enzyme. Optimum pH, optimum temperature, pH stability and temperature stability were found to be pH 5.0, 30–40°C, pH 4.0–7.0 and below 55°C, respectively. The apparent Michaelis constant of the immobilized -glucose oxidase membrane was 1.6 × 10⁻³ mol l⁻¹ and that of free enzyme was 4.8 × 10⁻² mol l⁻¹. An enzyme electrode was constructed by combination of a hydrogen peroxide electrode with the immobilized -glucose oxidase membrane. The enzyme electrode responded linearly to -glucose over the concentration 0–1000 mg dl⁻¹ within 10 s. When the enzyme electrode was applied to the determination of -glucose in human serum, within day precision (CV) was 1.29% for -glucose concentration with a mean value of 106.8 mg dl⁻¹. The correlation coefficient between the enzyme electrode method and the conventional colorimetric method using a free enzyme was 0.984. The immobilized -glucose oxidase membrane was sufficiently stable to perform 1000 assays (2 to 4 weeks operation) for the determination of -glucose in human whole blood. The dried membrane retained 77% of its initial activity after storage at 4°C for 16 months.     

An amperometric xanthine oxidase enzyme electrode based on hydrogen peroxide electroreduction

A xanthine oxidase enzyme electrode (xanthine oxidase immobilized on electrochemically modified graphite and conveniently coated with gelatine electrode working surface) for quantitative analysis of xanthine is proposed. The detection of thus developed electrochemical system is based on the electroreduction of hydrogen peroxide generated in enzyme layer and offered L-ascorbic and uric acid reducing interference effect on the substrate determination. At a working potential -50 mV (vs. Ag/AgCl) the detection limit of 4.5 microM and the linearity of the amperometric signal up to substrate concentration of about 40 microM were found. At that working potential, the electrode is practically inert towards L-ascorbic- and uric acid present. The response time did not exceed 2 min.     

Immobilization of enzyme onto poly(ethylene-vinyl alcohol) membrane

Invertase was ionically bound to the poly(ethylene-vinyl alcohol) membrane surface modified with two aminoacetals with different molecular length, 2-dimethyl-aminoacetoaldehyde dimethylacetal (AAA) and 3-(N, N-dimethylamino-n-propanediamine) propionaldehyde dimethylacetal (APA). Immobilization conditions were determined with respect to enzyme concentration in solution, pH value, ionic strength in immobilization solution, and immobilization time. Various properties of immobilized invertase were evaluated, and thermal stability was found especially to be improved by immobilization. The apparent Michaelis constant, K(m), was smaller for invertase bound by APA with longer molecular lengths than for invertase bound by AAA. We attempted to bind glucoamylase of Rhizopus delemar origin in the same way. The amount and activity of immobilized glucoamylase were much less than of invertase.     

Oxygen-stabilized enzyme electrode for d-glucose analysis in fermentation broths

A new principle for the construction of oxygen-dependent enzyme electrodes is presented. The enzyme electrode is based on a galvanic oxygen electrode which is furnished with an electrolysis anode covered by immobilized enzyme and placed close to the oxygen-sensing surface. An ordinary oxygen electrode is used as a reference electrode. The enzymatic consumption of oxygen in the enzyme electrode generates a potential difference between the electrodes which is utilized to control electrolytic generation of oxygen from water in such a way that zero differential potential is maintained. Thus, the enzyme electrode operates under ambient oxygen tension and does not suffer from oxygen limitation. The electrolytic current in this system gives a measure of the concentration of substrate surrounding the enzyme electrode. The electrode has been applied for continuous d-glucose analysis in situ during batch cultures of Candida utilis.     

A vanadate-stimulated NADH oxidase in erythrocyte membrane generates hydrogen peroxide

Summary Oxidation of NADH by rat erythrocyte plasma membrane was stimulated by about 50-fold on addition of decavanadate, but not other forms of vanadate like orthovanadate, metavanadate aad vanadyl sulphate. The vanadate-stimulated activity was observed only in phosphate buffer while other buffers like Tris, acetate, borate and Hepes were ineffective. Oxygen was consumed during the oxidation of NADH and the products were found to be NAD⁺ and hydrogen peroxide. The reaction had a stoichiometry of one mole of oxygen consumption and one mole of H₂O₂ production for every mole of NADH that was oxidized.Superoxide dismutase and manganous inhibited the activity indicating the involvement of superoxide anions. Electron spin resonance in the presence of a spin trap, 5, 5-dimethyl pyrroline N-oxide, indicated the presence of superoxide radicals. Electron spin resonance studies also showed the appearance of V^IV species by reduction of V^V of decavanadate indicating thereby participation of vanadate in the redox reaction. Under the conditions of the assay, vanadate did not stimulate lipid peroxidation in erythrocyte membranes. Extracts from lipid-free preparations of the erythrocyte membrane showed full activity. This ruled out the possibility of oxygen uptake through lipid peroxidation. The vanadate-stimulated NADH oxidation activity could be partially solubilized by treating erythrocyte membranes either with Triton X-100 or sodium cholate. Partially purified enzyme obtained by extraction with cholate and fractionation by ammonium sulphate and DEAE-Sephadex was found to be unstable.     

Mechanism of hydrogen peroxide formation catalyzed by NADPH oxidase in thyroid plasma membrane

The thyroid plasma membrane contains a Ca2(+)-regulated NADPH-dependent H2O2 generating system which provides H2O2 for the thyroid peroxidase-catalyzed biosynthesis of thyroid hormones. The plasma membrane fraction contains a Ca2(+)-independent cytochrome c reductase activity which is not inhibited by superoxide dismutase. But it is not known whether H2O2 is produced directly from molecular oxygen (O2) or formed via dismutation of super-oxide anion (O2-). Indirect evidence from electron scavenger studies indicate that the H2O2 generating system does not liberate O2-, but studies using the modified peroxidase, diacetyldeuteroheme horseradish peroxidase, to detect O2- indicate that H2O2 is provided via the dismutation of O2-. The present results provide indirect evidence that the cytochrome c reductase activity is not a component of the NADPH-dependent H2O2 generator, since it was removed by washing the plasma membranes with 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonic acid without affecting H2O2 generation. Spectral studies with diacetyldeuteroheme-substituted horseradish peroxidase showed that the thyroid NADPH-dependent H2O2 generator does not catalyze superoxide anion formation. The O2- adduct compound (compound III) was formed but was completely inhibited by catalase, indicating that the initial product was H2O2. The rate of NADPH oxidation also increased in the presence of diacetylheme peroxidase. This increase was blocked by catalase and was greatly enhanced by superoxide dismutase. The O2- adduct compound (compound III) was produced in the presence of NADPH when glucose-glucose oxidase (which does not produce O2-) was used as the H2O2 generator. NADPH oxidation occurred simultaneously and was enhanced by superoxide dismutase. We conclude that O2- formation occurs in the presence of an H2O2 generator, diacetylheme peroxidase and NADPH, but that it is not the primary product of the H2O2 generator. We suggest that O2- formation results from oxidation of NADPH, catalyzed by the diacetylheme peroxidase compound I, producing NADP degree, which in turn reacts with O2 to give O2-.     

Immobilization of lipid vesicles on polymer support via an amphiphilic peptidic anchor: application to a membrane enzyme

To immobilize lipid vesicles on a polymer support, we have used a peptidic anchor with the following sequence: Ala-Ala-Leu-Leu-Leu-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-Ala-A la-Ala-Ala-Ala-Ala-Ala-Ala-Trp-Lys-Lys-Lys-Lys-Lys-Lys. This amphiphilic peptide was previously designed in our group to interact spontaneously and strongly with vesicles without perturbing their permeability. At the end of the solid-phase peptide synthesis, the peptide was left on the polymer beads and this novel polymer-peptide system was used for vesicle immobilization. It was shown that this polymer-peptide system could immobilize as much as 200 micromol of lipids per gram of dry resin. The amount of immobilized vesicles was decreased by a reduction of the proportion of the negatively charged lipids in the vesicles, indicating the importance of electrostatic interactions in the immobilization of the vesicles. The integrity of the vesicles was mostly preserved after the immobilization. This new polymer-peptide system was used easily and successfully to immobilize a membrane-bound enzyme, gamma-glutamyl transpeptidase. The activity of the membrane-bound enzyme was studied by monitoring the release of p-nitroaniline. The activity of the enzyme was still retained, even after being re-used eight times, indicating the strong immobilization of the enzyme in its active form. The polymer-peptide support could be regenerated by washing with ethanol and reused.     

Immobilization of enzyme onto cellulose-titanium oxide composite fiber

Fibers of a cellulose-TiO(2) composite were prepared by the reaction of cellulose with titanium iso-propoxide. Enzymes were immobilized on the fibers easily and simply under mild conditions. The fibers were stable in common solvents, high ionic solutions, and over a wide range of pH values 3-10. (c) 1993 John Wiley & Sons, Inc.     

Immobilization of glucose oxidase onto gold nanoparticles with enhanced thermostability

Immobilized proteins and enzymes were widely investigated in medical field as well as in food and environmental fields. In this paper, glucose oxidase (GOD) monolayer was covalently immobilized on the surface of gold nanoparticles (AuNPs) to fabricate bioconjugate complex. The citrate-stabilized AuNPs were first functionalized by a carboxyl-terminated alkanethiol and the terminal carboxyl groups were subsequently bonded with side-chain amino groups of protein surface through EDC/NHS coupling reaction. The enzyme activity assays of the obtained bioconjugates display an enhanced thermostability and similar pH-dependence behavior in contrast with that of free enzyme. Such GOD/AuNPs bioconjugates can be considered as a catalytic nanodevice to construct nanoreactor based on glucose oxidation reaction for biotechnological purpose.     

Development of a highly sensitive chemiluminescent assay for hydrogen peroxide under neutral conditions using acridinium ester and its application to an enzyme immunoassay

We developed a highly sensitive chemiluminescent (CL) assay for hydrogen peroxide using 10‐methyl‐9‐(phenoxycarbonyl) acridinium fluorosulfonate (PMAC) that produced chemiluminescence under neutral conditions and applied it to an enzyme immunoassay (EIA). One picomole of hydrogen peroxide could be detected using the optimized PMAC‐CL method and 6.2 × 10^‐20 mol β‐d ‐galactosidase (β‐gal) could be detected by combining an indoxyl derivative substrate and the proposed PMAC‐CL method. This highly sensitive CL β‐gal assay was applied to an EIA for thyroid‐stimulating hormone (TSH) using β‐gal as a label enzyme; 0.02–100.0 μU/mL TSH in human serum could be assayed directly and with high reproducibility. Copyright © 2013 John Wiley & Sons, Ltd.     

Immobilization of glucose oxidase and lactate dehydrogenase onto magnetic nanoparticles for bioprocess monitoring system

Glucose oxidase (GOD) and lactate dehydrogenase (LDH) were immobilized onto magnetic nanoparticles, viz. Fe₃O₄, via carbodiimide and glutaraldehyde. The immobilization efficiency was largely dependent upon the immobilization time and concentration of glutaraldehyde. The magnetic nanoparticles had a mean diameter of 9.3 nm and were superparamagnetic. The immobilization of GOD and LDH on the nanoparticles slightly decreased their saturation magnetization. However, the FT-IR spectra showed that GOD and LDH were immobilized onto the nanoparticles by different binding mechanisms, the reason for which was not well explained. The optimum pH values of the immobilized GOD and LDH were changed to 8 and 10, respectively. The free and immobilized enzyme kinetic parameters (K_m and V_max) were determined by Michaelis-Menten enzyme kinetics. The Km values for free and immobilized GOD were 0.168 and 0.324 mM, respectively, while those for free and immobilized LDH were 0.19 and 0.163 mM for NAD, and 2.976 and 4.785 mM for lactate, respectively. High operational stability was observed, with more than 80% of the initial enzyme activity being retained for the immobilized GOD up to 12 h and for the immobilized LDH up to 24 h. The immobilized GOD was applied to a sequential injection analysis system for the application of bioprocess monitoring.     

Immobilization of hemoglobin on zirconium dioxide nanoparticles for preparation of a novel hydrogen peroxide biosensor

Direct electrochemistry and thermal stability of hemoglobin (Hb) immobilized on a nanometer-sized zirconium dioxide (ZrO2) modified pyrolytic graphite (PG) electrode were studied. The immobilized Hb displayed a couple of stable and well-defined redox peaks with an electron transfer rate constant of (7.90 +/- 0.93)s(-1) and a formal potential of -0.361 V (-0.12 V versus NHE) in 0.1M pH 7.0 PBS. Both nanometer-sized ZrO2 and dimethyl sulfoxide (DMSO) could accelerate the electron transfer between Hb and the electrode. Spectroscopy analysis of the Hb/ZrO2/DMSO film showed that the immobilized Hb could retain its natural structure. This modified electrode showed a high thermal stability up to 74 degrees C and an electrocatalytic activity to the reduction of hydrogen peroxide (H2O2) without the aid of an electron mediator. The electrocatalytic response showed a linear dependence on the H2O2 concentration ranging from 1.5 to 30.2 microM with a detection limit of 0.14 microM at 3sigma. The apparent Michaelis-Menten constant KMapp for H2O2 sensor was estimated to be (0.31 +/- 0.02) mM, showing a high affinity.     

Application of a quinohaemoprotein alcohol dehydrogenase in bio-electrocatalysis: Immobilization of the enzyme and mediated electron transfer between the enzyme and an electrode

Summary Quinohaemoprotein alcohol dehydrogenase from Comamonas testosteroni was immobilized on polypyrrole-coated track-etch and microporous membranes. On the track-etch membrane, 3.4 to 4.8 × 10^–3 Units of enzyme/cm² was immobilized whilst on the microporous membrane 0.05 U/cm² was immobilized. The track-etch membrane was then used in electrochemical studies using ferricyanide as a redox mediator giving a maximum catalytic current of 0.022 mA/cm² membrane with 1-pentanol as the substrate. The kinetic parameters (K_m and V_max) of the immobilized enzyme are of the same order of magnitude as those of the free enzyme.     

A specific enzyme electrode for l-glutamate-development and application

A biosensor for the specific determination of l-glutamate has been developed using l-glutamate oxidase in combination with a hydrogen peroxide indicating electrode. The biosensor response depends linearly on l-glutamate concentration between 0.001 and 1.0 mM. The measuring time is 2 min. The sensor is stable for more than 10 days during which more than 500 assays can be performed. The sensor has been applied to l-glutamate determination in liquid seasonings. Furthermore, transaminase activities have been determined by their catalytic l-glutamate production from alpha-ketoglutarate and l-alanine or l-aspartate. Also, the coimmobilization of glutaminase yielded a bienzyme electrode sensitive to l-glutamine.     

The oxidation of cytochrome c oxidase by hydrogen peroxide

The reaction of H2O2 with mixed-valence and fully reduced cytochrome c oxidase was investigated by photolysis of fully reduced and mixed-valence carboxy-cytochrome c oxidase in the presence of H2O2 under anaerobic conditions. The results showed that H2O2 reacted rapidly (k = (2.5-3.1) X 10(4) M-1 X s-1) with both enzyme species. With the mixed-valence enzyme, the fully oxidised enzyme was reformed. On the time-scale of our experiments, no spectroscopically detectable intermediate was observed. This demonstrates that mixed-valence cytochrome c oxidase is able to use H2O2 as a two-electron acceptor, suggesting that cytochrome c oxidase may under suitable conditions act as a peroxidase. Upon reaction of H2O2 with the fully reduced enzyme, cytochrome a was oxidised before cytochrome a3. From this observation it was possible to estimate that the rate of electron transfer from cytochrome a to a3 is about 0.5-5 s-1.     

Modulation of bovine serum amine oxidase activity by hydrogen peroxide

Bovine serum amine oxidase (BSAO), reduced by excess amine under limited turnover conditions, was over 80% inactivated by H(2)O(2) upon oxygen exhaustion. The UV-Vis spectrum and the reduced reactivity with carbonyl reagents showed that the cofactor topaquinone (TPQ) was stabilized in reduced form. The protein large M(r) (170 kDa) prevented the identification of modified residues by amino acid analyses. Minor changes of the Cu(2+) EPR signal and the formation of a radical at g = 2.001, with intensity a few percent of that of the Cu(2+) signal, unaffected by a temperature increase, suggest that Cu(2+)-bound histidines were not oxidized and the radical was not the Cu(+)-semiquinolamine in equilibrium with Cu(2+)-aminoquinol. It may derive from the modification of a conserved residue in proximity of the active site, possibly the tyrosine at hydrogen-bonding distance of TPQ C-4 ionized hydroxyl. The inactivation reaction appears to be a general feature of copper-containing amine oxidases. It may be part of an autoregulatory process in vivo, possibly relevant to cell adhesion and redox signaling.     

Xanthine oxidase: a source of hydrogen peroxide in bovine thyroid glands.

Hydrogen peroxide produced by bovine thyroidal xanthine oxidase was found to yield protein bound iodine $\text{in vitro}$ in the presence of a thyroidal peroxidase. The thyroid metabolites, mono- and diiodotyramine, which have very potent inhibitory effects on thyroid monoamine oxidase have very little effect on thyroid xanthine oxidase below 1 mM concentration. Allopurinol and formycin B reduced the level of iodination of protein in thyroid tissue slices. These data suggest that thyroid xanthine oxidase may be an important source of the hydrogen peroxide required for thyroxine biosynthesis.     

The reactions of hydrogen peroxide with bovine cytochrome c oxidase

Oxidised cytochrome c oxidase is known to react with two molecules of hydrogen peroxide to form consecutively 607 nm 'Peroxy' and 580-nm 'Ferryl' species. These are widely used as model compounds for the equivalent P and F intermediates of the catalytic cycle. However, kinetic analysis of the reaction with H(2)O(2) in the pH range 6.0-9.0 reveals a more complex situation. In particular, as the pH is lowered, a 580-nm compound can be formed by reaction with a single H(2)O(2). This species, termed F(&z.rad;), is spectrally similar, but not identical, to F. The reactions are equivalent to those previously reported for the bo type quinol oxidase from Escherichia coli (T. Brittain, R.H. Little, C. Greenwood, N.J. Watmough, FEBS Lett. 399 (1996) 21-25) where it was proposed that F(&z.rad;) is produced directly from P. However, in the bovine oxidase F(&z.rad;) does not appear in samples of the 607-nm form, P(M), produced by CO/O(2) treatment, even at low pH, although this form is shown to be identical to the H(2)O(2)-derived P state, P(H), on the basis of spectral characteristics and kinetics of reaction with H(2)O(2). Furthermore, lowering the pH of a sample of P(M) or P(H) generated at high pH results in F(&z.rad;) formation only on a minutes time scale. It is concluded that P and F(&z.rad;) are not in a rapid, pH-dependent equilibrium, but instead are formed by distinct pathways and cannot interconvert in a simple manner, and that the crucial difference between them lies in their patterns of protonation.