Immobilization of fungal (Trametes versicolor) laccase onto Amberlite IR-120 H beads: Optimization and characterization

Laccase from Trametes versicolor was immobilized on Amberlite IR-120 H beads. Maximum immobilization obtained was 78.7% at pH = 4.5 and temperature T = 45 °C. Kinetic parameters, K_m and V_max values, were determined respectively as 0.051 mM and 2.77 × 10^?2 mM/s for free and 4.70 mM and 5.27 × 10^?3 mM/s for immobilized laccase. The Amberlite–laccase system showed a 30% residual activity after 7 cycles. On the other hand, the loss of activity for free laccase after 7 days of storage at 4 °C was 18.5% in comparison to Amberlite–laccase system with a loss of 1.4%, during the same period. Improved operational, thermal and storage stabilities of the immobilized laccase were obtained compared to the free counterpart. Therefore, the use of low-cost matrices, like Amberlite for enzyme immobilization represents a promising product for enzymatic industrial applications.     

Immobilization of alkaline serine endopeptidase from Bacillus licheniformis on SBA-15 and MCF by surface covalent binding

An industrial enzyme, alkaline serine endopeptidase, was immobilized on surface modified SBA-15 and MCF materials by amide bond formation using carbodiimide as a coupling agent. The specific activities of free enzyme and enzyme immobilized on SBA-15 and MCF were studied using casein (soluble milk protein) as a substrate. The highest activity of free enzyme was obtained at pH 9.5 while this value shifted to pH 10 for SBA-15 and MCF immobilized enzyme. The highest activity of immobilized enzymes was obtained at higher temperature (60 °C) than that of the free enzyme (55 °C). Kinetic parameters, Michaelis–Menten constant (K_m) and maximum reaction velocity (V_max), were calculated as K_m = 13.375, 11.956, and 8.698 × 10^?4 mg/ml and V_max = 0.156, 0.163 and 0.17 × 10^?3 U/mg for the free enzyme and enzyme immobilized on SBA-15 and MCF, respectively. The reusability of immobilized enzyme showed 80% of the activity retained even after 15 cycles. Large pore sized MCF immobilized enzyme was found to be more promising than the SBA-15 immobilized enzyme due to the availability of larger pores of MCF, which offer facile diffusion of substrate and product molecules.     

Biodegradation of Tapis blended crude oil in marine sediment by a consortium of symbiotic bacteria

Biodegradation rate and the high molecular weight hydrocarbons are among the important concerns for bioremediation of crude oil. Inoculation of a non-oil-degrading bacterium as supplementary bacteria increased oil biodegradation from 57.1% to 63.0% after 10 days of incubation. Both the oil-degrading bacteria and the non-oil-degrading bacteria were isolated from Malaysian marine environment. Based on the 16S rDNA sequences, the oil-degrading bacteria was identified as Pseudomonas pseudoalcaligenes (99% similarity) while the non-oil-degrading bacterium was Erythrobacter citreus (99% similarity). E. citreus does not grow on crude oil enriched medium under present experimental condition but it withstands 5000 mg kg^?1 Tapis blended crude oil in sediment. Under optimal condition, the oil-degrading bacterium; P. pseudoalcaligenes, alone utilized 583.3 ± 3.8 mg kg^?1 (57.1%) at the rate of 3.97 × 10^?10 mg kg^?1 cell^?1 day^?1 Tapis blended crude oil from 1000 mg kg^?1 oil-contaminated sediment. Inoculation of E. citreus as the supplementary bacteria to P. pseudoalcaligenes enhanced biodegradation. The bacterial consortium degraded 675.8 ± 18.5 mg kg^?1 (63.0%) Tapis blended crude oil from the 1000 mg kg^?1 oil-contaminated sediment. Biodegradation rate of the bacterial consortium increased significantly to 4.59 × 10^?10 mg kg^?1 cell^?1 day^?1 (p = 0.02). Improvement of the oil degradation by the bacterial consortium was due to the synergetic reaction among the bacterial inoculants. There are two implications: (1) E. citreus may have a role in removing self-growth-inhibiting compounds of P. pseudoalcaligens. (2) P. pseudoalcaligenes degraded Tapis blended crude oil while E. citreus competes for the partially degraded hydrocarbons by P. pseudoalcaligenes. P. pseudoalcaligenes forced to breakdown more hydrocarbons to sustain its metabolic requirement. The bacterial consortium degraded 78.7% of (C₁₂–C₃₄) total aliphatic hydrocarbons (TAHs) and 74.1% of the 16 USEPA prioritized polycyclic aromatic hydrocarbons.     

A Kazal-type serine proteinase inhibitor from chicken liver (clTI-1): Purification,primary structure,and inhibitory properties

Low-molecular-mass trypsin inhibitor (clTI-1; chicken liver Trypsin Inhibitor-1) was purified from chicken liver by extraction with perchloric acid, ammonium sulfate precipitation, a combination of ethanol-acetone fractionation followed by gel filtration, ion-exchange chromatography and RP-HPLC on a C18 column. The inhibitor occurs in two isoforms with molecular masses of 5938.56 and 6026.29 Da (determined by MALDI TOFF mass spectrometry). The complete amino acid sequences of both isoforms were determined (UniProtKB/Swiss-Prot P85000; ISK1L_CHICK). The inhibitor shows a high homology to Kazal-type family inhibitors, especially to trypsin/acrosin inhibitors and pancreatic secretory trypsin inhibitors. clTI-1 inhibits both bovine and porcine trypsin (K_a = 1.1 × 10⁹ M^?1 and 2.5 × 10⁹ M^?1, respectively). Significant differences were shown in the inhibition of the anionic and cationic forms of chicken trypsin (K_a = 4.5 × 10⁸ M^?1 and 1.2 × 10¹⁰ M^?1). Weak interaction with human plasmin (K_a = 1.2 × 10⁷ M^?1) was also revealed.     

Poly(3-hydroxybutyrate) production by Cupriavidus necator using waste glycerol

Polyhydroxyalkanoates (PHAs) have been recognized as good substitutes for the non-biodegradable petrochemically produced polymers. However, their high (real or estimated) current production cost limits their industrial applications. This work exploits two strategies to enhance PHAs substitution potential: the increase in PHA volumetric productivity in high density cultures and the use of waste glycerol (GRP), a by-product from the biodiesel industry, as primary carbon source for cell growth and polymer synthesis. Cupriavidus necator DSM 545 was used to accumulate poly(3-hydroxybutyrate) (P(3HB)) from GRP and from commercial glycerol (PG) as control substrate. On PG, productivities between 0.6 g_PHB L^?1 h^?1 and 1.5 g_PHB L^?1 h^?1 were attained. The maximum cell DW was 82.5 g_DW L^?1, the P(3HB) content being 62%. When GRP was used, 68.8 g_DW L^?1 with a P(3HB) accumulation of 38% resulting in a final productivity of 0.84 g_PHB L^?1 h^?1 was obtained. By decreasing the biomass concentration at which accumulation was triggered, a productivity of 1.1 g_PHB L^?1 h^?1 (50% P(3HB), w/w) was attained using GRP. P(3HB) molecular weights (M_w) ranged from 7.9 × 10⁵ to 9.6 × 10⁵ Da.     

Purification and characterization of a new laccase from Shiraia sp.SUPER-H168

A new laccase from Shiraia sp.SUPER-H168 was purified by ion exchange column chromatography and gel permeation chromatography and the apparent molecular mass of this enzyme was 70.78 kDa, as determined by MALDI/TOF-MS. The optimum pH value of the purified laccase was 4, 6, 5.5 and 3 with 2,6-dimethoxyphenol (DMP), syringaldazine, guaiacol and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as substrates, respectively. The optimum temperature of the purified laccase was 50 °C using DMP, syringaldazine and guaiacol as substrates, but 60 °C for ABTS. Inhibitors and metal ions of SDS, NaN₃, Ag⁺ and Fe³⁺ showed inhibition on enzyme activity of 10.22%, 7.86%, 8.13% and 67.50%, respectively. Fe²⁺ completely inhibited the purified laccase. The K_cat/K_m values of the purified laccase toward DMP, ABTS guaiacol and syringaldazine were 3.99 × 10⁶, 3.74 × 10⁷, 8.01 × 10⁴ and 2.35 × 10⁷ mol^?1 L S^?1, respectively. The N-terminal amino acid sequence of the purified laccase showed 36.4% similarity to Pleurotus ostrestus. Approximately 66% of the Acid Blue 129 (100 mg L^?1) was decolorized by 2.5 U of the purified laccase after a 120 min incubation at 50 °C. Acid Red 1 (20 mg L^?1) and Reactive Black 5 (50 mg L^?1) were decolorized by the purified laccase after the addition of Acid Blue 129 (100 mg L^?1).     

Fructanolytic and saccharolytic enzymes of Treponema zioleckii strain kT

Enzymes in the newly described rumen bacterium, Treponema zioleckii strain kT, capable of digesting Timothy grass fructan, inulin, and sucrose were identified and characterized. Two specific endolevanases and one non-specific β-fructofuranosidase were found in a cell-free extract. The molecular weight of the endolevanases were estimated to be 60 and 36 kDa, whereas that of β-fructofuranosidase, 87 kDa. The former of the specific enzymes was associated with the outer membrane, while the latter and the non-specific β-fructofuranosidase, with the periplasm or cytosol. The K_m and V_max for Timothy grass fructan degradation by endolevanase were 0.27% and 15.75 μM fructose equivalents × mg protein^?1 × min^?1, those for sucrose and inulin digestion by β-fructofuranosidase were 1.35 × 10^?3 M and 1.73 μM hexoses × mg protein^?1 × min^?1 and 1.77% and 1.83 μM hexoses × mg protein^?1 × min^?1, respectively.     

Bioconversion of phenylpyruvic acid to l-phenylalanine by mixed-gel immobilization of Escherichia coli EP8-10

A mixed-gel of κ-carrageenan and gelatin was used in l-phenylalanine production. The mixed-gel, containing 87.5% κ-carrageenan and 12.5% gelatin [the total gel concentration was 4 wt%], showed the best performance and was selected for further study with Escherichia coli EP8-10. The optimum pH and temperature were 8.5 and 37 °C, respectively. The effects of trehalose and Mg²⁺ were studied in the mixed-gel immobilization. Their optimum concentrations were 5 × 10^?2 and 2 × 10^?3 mol/L, respectively. Under the optimal conditions, 98.3% of the phenylpyruvic acid (PPA) was converted to l-phenylalanine. The activity recovery of the transaminase enzyme in the mixed-gel immobilization was higher than that in single κ-carrageenan immobilization, which was 93.6%. The total PPA conversion rate was over 80% in all 15 batches, suggesting great sustainability in the mixed-gel immobilization. The maximum reaction rate (r_max) was calculated to be 4.75 × 10^?2 mol/(L g h).     

Characterization of functionally active immobilized carbonic anhydrase purified from sheep blood lysates

Carbonic anhydrase (CA) catalyzes the reversible reaction of hydration of CO₂ to bicarbonate and the dehydration of bicarbonate back to CO₂. Sequestration of CO₂ from industrial processes or breathing air may require a large amount of highly active and stable CA. Therefore, the objectives of the present study were to purify large amounts of CA from a cheap and easily accessible source of the enzyme and to characterize the enzymatic and kinetic properties of soluble and immobilized enzyme. We recovered 80% of pure enzyme with a specific activity of 4870 EU/mg protein in a single step using sheep blood lysates from slaughter house waste products and CA specific inhibitor affinity chromatography. Since affinity pure CA showed both anhydrase and esterase activities, we measured the esterase activities for enzymology. The Michaelis–Menten constant, K_M, pH optimum, activation energy, and thermal stability of soluble enzymes were 8 × 10^?2 M, 7.3 pH, 7.3 kcal/mol and 70 °C, respectively.The immobilization of the enzyme to Affigel-10 was very efficient and 83% of purified enzyme was immobilized. The immobilized enzyme showed a K_M of 5 × 10^?2 M and activation energy of 8.9 kcal/mol, suggesting a better preference of substrate for immobilized enzyme in comparison to soluble enzyme. In contrast to soluble enzyme, immobilized enzyme showed relatively higher activity at pH 6–8. From these results, we concluded that a shift in pH profile toward acidic pH is due to modification of lysine residues involved in the immobilization process. The immobilized enzyme was stable at higher temperatures and showed highest activity at 80 °C. The activity of immobilized enzyme in a flow reactor at 0.5–2.2 ml/min flow rate was unaffected. Collectively, results from the present study suggested the application of blood lysate waste from animal slaughterhouses for purification of homogeneous enzyme for CO₂ capture in a flow reactor.     

Immobilization of acidic lipase derived from Pseudomonas gessardii onto mesoporous activated carbon for the hydrolysis of olive oil

Mesoporous activated carbon (MAC) derived from rice husk is used for the immobilization of acidic lipase (ALIP) produced from Pseudomonas gessardii. The purified acidic lipase had the specific activity and molecular weight of 1473 U/mg and 94 kDa respectively. To determine the optimum conditions for the immobilization of lipase onto MAC, the experiments were carried out by varying the time (10–180 min), pH (2–8), temperature (10–50 °C) and the initial lipase activity (49 × 10³, 98 × 10³, 147 × 10³ and 196 × 10³ U/l in acetate buffer). The optimum conditions for immobilization of acidic lipase were found to be: time—120 min; pH 3.5; temperature—30 °C, which resulted in achieving a maximum immobilization of 1834 U/g. The thermal stability of the immobilized lipase was comparatively higher than that in its free form. The free and immobilized enzyme kinetic parameters (K_m and V_max) were found using Michaelis–Menten enzyme kinetics. The K_m values for free enzyme and immobilized one were 0.655 and 0.243 mM respectively. The immobilization of acidic lipase onto MAC was confirmed using Fourier Transform-Infrared Spectroscopy, X-ray diffraction analysis and scanning electron microscopy.     

Biocontrol of major postharvest pathogens on apple using Rhodotorula glutinis and its effects on postharvest quality parameters

The biocontrol activity of Rhodotorula glutinis on gray mold decay and blue mold decay of apple caused by Botrytis cinerea and Penicillium expansum, respectively, was investigated, as well as its effects on postharvest quality of apple fruits. The results show there was a significant negative correlation between concentrations of the yeast cells and the disease incidence of the pathogens. The higher concentration of the R. glutinis, the better effect of the biocontrol capacity. At concentrations of R. glutinis 1 × 10⁸ CFU ml^?1, the amount of gray mold decay was completely inhibited after 5 days incubation at 20 °C, after challenge with B. cinerea spores suspension of 1 × 10⁵ spores ml^?1; While the blue mold decay was completely inhibited at concentrations of 5 × 10⁸ CFU ml^?1, at challenged with P. expansum spores suspension of 5 × 10⁴ spores ml^?1_. These results demonstrated that the efficacy of R. glutinis in controlling of gray mold decay of apples was better than the efficacy of controlling blue mold. R. glutinis within inoculated wounds on apples increased in numbers at 20 °C from an initial level of 9.5 × 10⁵ CFU per wound to 2.24 × 10⁷ CFU at 20 °C after 1 day. The highest population of the yeast was recovered 4 days after inoculation, the yeast population in wounds increased by 56.9 times. After that, the population of the yeast began to decline very slowly. R. glutinis significantly reduced the incidence of natural infections on intact fruit from 75% in the control fruit to 28.3% after 5 days at 20 °C, and from 58.3 to 6.7% after 30 days at 4 °C followed by 4 days at 20 °C. R. glutinis treatment had no deleterious effect on quality parameters after 5 days at 20 °C or after 30 days at 4 °C followed by 4 days at 20 °C.     

Inulin hydrolysis and citric acid production from inulin using the surface-engineered Yarrowia lipolytica displaying inulinase

The INU1 gene encoding exo-inulinase cloned from Kluyveromyces marxianus CBS 6556 was ligated into the surface display plasmid and expressed in the cells of the marine-derived yeast Yarrowia lipolytica which can produce citric acid. The expressed inulinase was immobilized on the yeast cells. The activity of the immobilized inulinase with 6 × His tag was found to be 22.6 U mg^?1 of cell dry weight after cell growth for 96 h. The optimal pH and temperature of the displayed inulinase were 4.5 and 50 °C, respectively and the inulinase was stable in the pH range of 3–8 and in the temperature range of 0–50 °C. During the inulin hydrolysis, the optimal inulin concentration was 12.0% and the optimal amount of added inulinase was 181.6 U g^?1 of inulin. Under such conditions, over 77.9% of inulin was hydrolyzed within 10 h and the hydrolysate contained main monosaccharides and disaccharides, and minor trisaccharides. During the citric acid production in the flask level, the recombinant yeast could produce 77.9 g L^?1 citric acid and 5.3 g L^?1 iso-citric acid from inulin while 68.9 g L^?1 of citric acid and 4.1 g L^?1 iso-citric acid in the fermented medium were attained within 312 h of the 2-L fermentation, respectively.     

Optimization and immobilization of amylase obtained from halotolerant bacteria isolated from solar salterns

The objective of the present study was to isolate halotolerant bacteria from the sediment sample collected from Marakanam Solar Salterns, Tamil Nadu, India using NaCl supplemented media and screened for amylase production. Among the 22 isolates recovered, two strains that had immense potential were selected for amylase production and designated as P1 and P2. The phylogenetic analysis revealed that P1 and P2 have highest homology with Pontibacillus chungwhensis (99%) and Bacillus barbaricus (100%). Their amylase activity was optimized to obtain high yield under various temperature, pH and NaCl concentration. P1 and P2 strain showed respective, amylase activity maximum at 35 °C and 40 °C; pH 7.0 and 8.0; 1.5 M and 1.0 M NaCl concentration. Further under optimized conditions, the amylase activity of P1 strain (49.6 U mL^?1) was higher than P2 strain. Therefore, the amylase enzyme isolated from P. chungwhensis P1 was immobilized in sodium alginate beads. Compared to the free enzyme form (49.6 U mL^?1), the immobilized enzyme showed higher amylase activity as 90.3 U mL^?1. The enzyme was further purified partially and the molecular mass was determined as 40 kDa by SDS–PAGE. Thus, high activity of amylase even under increased NaCl concentration would render immense benefits in food processing industries.     

Characterization of the lipase immobilized on Mg–Al hydrotalcite for biodiesel

Immobilization of Saccharomyces cerevisiae lipase by physical adsorption on Mg–Al hydrotalcite with a Mg/Al molar ratio of 4.0 led to a markedly improved performance of the enzyme. The immobilized lipase retained activity over wider ranges of temperature and pH than those of the free lipase. The immobilized lipase retained more than 95% relative activity at 50 °C, while the free lipase retained about 88%. The kinetic constants of the immobilized and free lipases were also determined. The apparent activation energies (E_a) of the free and immobilized lipases were estimated to be 6.96 and 2.42 kJ mol^?1, while the apparent inactivation energies (E_d) of free and immobilized lipases were 6.51 and 6.27 kJ mol^?1, respectively. So the stability of the immobilized lipase was higher than that of free lipase. The water content of the oil must be kept below 2.0 wt% and free fatty acid content of the oil must be kept below 3.5 mg KOH g [oil]^?1 in order to get the best conversion. This immobilization method was found to be satisfactory to produce a stable and functioning biocatalyst which could maintain high reactivity for repeating 10 batches with ester conversion above 81.3%.     

Cytokine mRNA expression in Peromyscus yucatanicus (Rodentia: Cricetidae) infected by Leishmania (Leishmania) mexicana

Peromyscus yucatanicus, the main reservoir of Leishmania (Leishmania) mexicana in the Yucatan peninsula of Mexico, reproduces clinical and histological pictures of LCL in human as well as subclinical infection. Thus, we used this rodent as a novel experimental model. In this work, we analyzed cytokine mRNA expression in P. yucatanicus infected with L. (L.) mexicana. Animals were inoculated with either 2.5 × 10⁶ or 1 × 10² promastigotes and cytokine expressions were analyzed by real-time RT-PCR in skin at 4 and 12 weeks post-infection (wpi). Independently of the parasite inoculum none of the infected rodents had clinical signs of LCL at 4 wpi and all expressed high IFN-γ mRNA. All P. yucatanicus inoculated with 2.5 × 10⁶ promastigotes developed signs of LCL at 12 wpi while the mice inoculated with 1 × 10² remained subclinical. At that time, both IFN-γ and IL-10 were expressed in P. yucatanicus with clinical and subclinical infections. Expressions of TNF-α and IL-4 were significantly higher in clinical animals (2.5 × 10⁶) compared with subclinical ones (1 × 10²). High TGF-β expression was observed in P. yucatanicus with clinical signs when compared with healthy animals. Results suggested that the clinical course of L. (L.) mexicana infection in P. yucatanicus was associated with a specific local pattern of cytokine production at 12 wpi.     

Production of the postharvest biocontrol agent Bacillus subtilis CPA-8 using low cost commercial products and by-products

The aim of this research was to identify a low cost medium based on commercial products and by-products that provided maximum Bacillus subtilis CPA-8 growth and maintained biocontrol efficacy. Low cost media combining economical nitrogen and carbon sources such as yeast extract, peptone, soy products, sucrose, maltose and molasses were tested. Tests were carried out in 250-ml flasks containing 50 ml of each tested medium. Maximum cell growth (>3 × 10⁹ CFU ml^?1) was obtained in defatted soy flour 44% combined with sucrose or molasses media. Second, CPA-8 production was scaled up in a 5-l fermenter and CPA-8 population dynamics, pH and oxygen consumption in the optimized medium (defatted soy flour 44% – molasses) was recorded. In these tests, there was a 5-h lag phase before growth, after which exponential growth occurred and maximum production was 3 × 10⁹ CFU ml^?1 after 20 h. Fruit trials with cells and cell free supernatants from CPA-8 grown in optimized medium maintained biocontrol efficacy against Monilinia fructicola on peaches, resulting in disease reductions up to 95%. CPA-8 populations survived in wounds on inoculated peaches, regardless of the culture media used. The results show that B. subtilis CPA-8 can be produced in a low cost medium combining inexpensive nitrogen and carbon sources (40 g l^?1 defatted soy flour 44%, 5 g l^?1 molasses plus mineral trace supplements) in shake flasks and a laboratory fermenter (5 l). The results could be used to provide a reliable basis for scaling up the fermentation process to an industrial level.     

Inhibition of acetylcholinesterase by chromophore-linked fluorophosphonates

Fluorophosphonate (FP) head groups were tethered to a variety of chromophores (C) via a triazole group and tested as FPC inhibitors of recombinant mouse (rMoAChE) and electric eel (EEAChE) acetylcholinesterase. The inhibitors showed bimolecular inhibition constants (k_i) ranging from 0.3 × 10⁵ M^?1 min^?1 to 10.4 × 10⁵ M^?1 min^?1. When tested against rMoAChE, the dansyl FPC was 12.5-fold more potent than the corresponding inhibitor bearing a Texas Red as chromophore, whereas the Lissamine and dabsyl chromophores led to better anti-EEAChE inhibitors. Most inhibitors were equal or better inhibitors of rMoAChE than EEAChE. 3-Azidopropyl fluorophosphonate, which served as one of the FP head groups, showed excellent inhibitory potency against both AChE’s (? 1 × 10⁷ M^?1 min^?1) indicating, in general, that addition of the chromophore reduced the overall anti-AChE activity. Covalent attachment of the dabsyl-FPC analog to rMoAChE was demonstrated using size exclusion chromatography and spectroscopic analysis, and visualized using molecular modeling.     

Immobilization of catalase onto Eupergit C and its characterization

Bovine liver catalase was covalently immobilized onto Eupergit C. Optimum conditions of immobilization: pH, buffer concentration, temperature, coupling time and initial catalase amount per gram of carrier were determined as 7.5, 1.0 M, 25 °C, 24 h and 4.0 mg/g, respectively. V_max and K_m were determined as 1.4(±0.2) × 10⁵ U/mg protein and 28.6 ± 3.6 mM, respectively, for free catalase, and as 3.7(±0.4) × 10³ U/mg protein and 95.9 ± 0.6 mM, respectively, for immobilized catalase. The thermal stability of the immobilized catalase in terms of half-life time (29.1 h) was comparably higher than that of the free catalase (9.0 h) at 40 °C. Comparison of storage stabilities showed that the free catalase completely lost its activity at the end of 11 days both at room temperature and 5 °C. However, immobilized catalase retained 68% of its initial activity when stored at room temperature and 79% of its initial activity when stored at 5 °C at the end of 28 days. The highest reuse number of immobilized catalase was 22 cycles of batch operation when 40 mg of immobilized catalase loaded into the reactor retaining about 50% of its original activity. In the plug flow type reactor, the longest operation time was found as 82 min at a substrate flow rate of 2.3 mL/min when the remaining activity of 40 mg immobilized catalase was about 50% of its original activity. The resulting immobilized catalase onto Eupergit C has good reusability, thermal stability and long-term storage stability.     

Immobilization of apricot pectinesterase (Prunus armeniaca L.) on porous glass beads and its characterization

Pectinesterase isolated from Malatya apricot pulp was covalently immobilized onto glutaraldehyde-containing amino group functionalized porous glass beads surface by chemical immobilization at pH 8.0. The amount of covalently bound apricot PE was found 1.721 mg/g glass support. The properties of immobilized enzyme were investigated and compared to those of free enzyme. The effect of various parameters such as pH, temperature, activation energy, heat and storage stability on immobilized enzyme were investigated. Optimum pH and temperature were determined to be 8.0 and 50 °C, respectively. The immobilized PE exhibited better thermostability than the free one. Kinetic parameters of the immobilized enzyme (K_m and V_max values) were also evaluated. The K_m was 0.71 mM and the V_max was 0.64 μmol min^?1 mg^?1. No drastic change was observed in the K_m and V_max values. The patterns of heat stability indicated that the immobilization process tends to stabilize the enzyme. Thermal and storage stability experiments were also carried out. It was observed that the immobilized enzyme had longer storage stability and retained 50% of its initial activity during 30 days.     

Development of biosensor for phenolic compounds containing PPO in β-cyclodextrin modified support and iridium nanoparticles

A biosensor based on the iridium nanoparticles dispersed in ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate (Ir-BMI·PF₆) and a celery (Apium graveolens) extract as a source of polyphenol oxidase (PPO) was constructed. A modified support based on β-cyclodextrin (β-CDEP) was used for enzyme immobilization. The behavior of phenolic compounds was investigated by square-wave voltammetry and rutin was selected by presenting the greatest signal. The best performance was obtained with a composition of 70:10:10:10% (w/w/w/w) of the graphite powder:β-CDEP:Nujol:Ir-BMI·PF₆ composition, a PPO concentration of 500 units mL^?1, in 0.1 M phosphate buffer solution (pH 6.0) with frequency, pulse amplitude and scan increment at 100 Hz, 60 mV, and 3.0 mV, respectively. Under optimized conditions, the cathodic currents increased linearly for the rutin concentration range of 1.3 × 10^?7–2.0 × 10^?6 M with a detection limit of 7.9 × 10^?8 M. This sensor demonstrated acceptable repeatability and reproducibility and the results for the rutin recovery ranged from 92.8 to 103.4%. A relative error of 0.7% was obtained in the rutin determination in simulated samples.