Construction of a colony bank of E. coli containing hybrid plasmids representative of the Bacillus subtilis 168 genome. Expression of functions harbored by the recombinant plasmids in B. subtilis.

Summary A collection of about 2500 clones containing hybrid plasmids representative of nearly the entire genome of B. subtilis 168 was established in E. coli SK1592 by using the poly(dA)·poly(dT) joining method with randomly sheared DNA fragments and plasmid pHV33, a bifunctional vector which can replicate in both E. coli and B. subtilis. Detection of cloned recombinant DNA molecules was based on the insertional inactivation of the Tc gene occurring at the unique BamHI cleavage site present in the vector plasmid.Thirty individual clones of the collection were shown to hybridize specifically with a B. subtilis rRNA probe. CCC-recombinant plasmids extracted from E. coli were pooled in lots of 100 and used to transform auxotrophic mutants of B. subtilis 168. Complementation of these auxotrophic mutations was observed for several markers such as thr, leuA, hisA, glyB and purB. In several cases, markers carried by the recombinant plasmids were lost from the plasmid and integrated into the chromosomal DNA. Loss of genetic markers from the hybrid plasmids did not occur when a rec ^- recipient strain of B. subtilis was used.Abbreviations Ap^R resistance to ampicillin - Tc^R resistance to tetracycline - Cm^R resistance to chloramphenicol - CCC covalently closed circular duplex - Mdal magadalton     

Different specific activities of the monomeric and oligomeric forms of plasmid DNA in transformation of B. subtilis and E. coli.

Summary (1) The low residual transforming activity in preparations of monomeric, supercoiled, circular (CCC) forms of the plasmids pC194 and pHV14 could be attributed to the presence in such isolates of a small number of contaminating multimeric molecules. (2) E. coli derived preparations of pHV14, an in vitro recombinant plasmid capable of replication in both E. coli and B. subtilis, contain oligomeric forms of plasmid DNA in addition to the prevalent monomeric CCC form. The specific transforming activity of pHV14 DNA for E. coli is independent of the degree of oligomerization, whereas in transformation of B. subtilis the specific activity of the purified monomeric CCC molecules is at least four orders of magnitude less than that of the unfractionated preparation. (3) Oligomerization of linearized pHV14 DNA by T4 ligase results in a substantial increase of specific transforming activity when assayed with B. subtilis and causes a decrease when used to transform E. coli.     

Restriction and modification in Bacillus subtilis Marburg 168: target sites and effects on plasmid transformation

Summary The effects of the restriction system of Bacillus subtilis strain M on plasmid transformation were studied. Plasmid pHV1401 DNA prepared from B. subtilis transformed the restriction-proficient M strain 100 times more efficiently than the DNA prepared from Escherichia coli, while the two DNA preparations transformed restriction-deficient derivatives of that strain with similar efficiencies. This indicates that transformation with pHV1401 is sensitive to the M restriction system. pHV1401 contains three CTCGAG (XhoI sites). Successive removal of these abolished the effect of restriction. This indicates that the XhoI sites are the targets for the M restriction system.Abbreviations used Ap^r resistance to ampicillin - Cm^r resistance to chloramphenicol - R/M restriction and modification - Tc^r resistance to tetracycline     

Genetic and physical mapping of DNA replication origins in Haloferax volcanii

The halophilic archaeon Haloferax volcanii has a multireplicon genome, consisting of a main chromosome, three secondary chromosomes, and a plasmid. Genes for the initiator protein Cdc6/Orc1, which are commonly located adjacent to archaeal origins of DNA replication, are found on all replicons except plasmid pHV2. However, prediction of DNA replication origins in H. volcanii is complicated by the fact that this species has no less than 14 cdc6/orc1 genes. We have used a combination of genetic, biochemical, and bioinformatic approaches to map DNA replication origins in H. volcanii. Five autonomously replicating sequences were found adjacent to cdc6/orc1 genes and replication initiation point mapping was used to confirm that these sequences function as bidirectional DNA replication origins in vivo. Pulsed field gel analyses revealed that cdc6/orc1-associated replication origins are distributed not only on the main chromosome (2.9 Mb) but also on pHV1 (86 kb), pHV3 (442 kb), and pHV4 (690 kb) replicons. Gene inactivation studies indicate that linkage of the initiator gene to the origin is not required for replication initiation, and genetic tests with autonomously replicating plasmids suggest that the origin located on pHV1 and pHV4 may be dominant to the principal chromosomal origin. The replication origins we have identified appear to show a functional hierarchy or differential usage, which might reflect the different replication requirements of their respective chromosomes. We propose that duplication of H. volcanii replication origins was a prerequisite for the multireplicon structure of this genome, and that this might provide a means for chromosome-specific replication control under certain growth conditions. Our observations also suggest that H. volcanii is an ideal organism for studying how replication of four replicons is regulated in the context of the archaeal cell cycle.     

Construction of aClostridium acetobutylicum-Escherichia coli shuttle vector

Summary A 4.1-kb cryptic plasmid, designated pCA134, has been isolated fromClostridium species. In order to develop a vector suitable for transforming saccharolytic clostridia three hybrid plasmids were constructed by inserting pCA134 into pHV32 withEcoRI, orBglII andBamHI. The newly constructed plasmids were propagated inEscherichia coli and were used to transformBacillus subtilis andClostridium acetobutylicum. One of them, pCAB32 (10.1 kb), which contains chloramphenicol acetyltransferase gene and an origin of replication derived from pCA134 was introduced intoB.subtilis andC.acetobutylicum as well asE.coli.     

Bacillus stearothermophilus plasmid pSTK1 replicon is functional in Escherichia coli

Summary A kanamycin-resistant plasmid possessing a thermostable replicon derived from Bacillus stearothermophilus cryptic plasmid pSTK1 was constructed. The plasmid could transform not only B. stearothermophilus and Bacillus subtilis, but also Gram-negative Escherichia coli. The behavior of the plasmid in the hosts was examined. The plasmid was stably maintained even at 67°C in B. stearothermophilus without selective pressure. During the plasmid replication, single-stranded DNA (ssDNA) intermediates were found in E. coli, while these were not found in B. subtilis.     

Recombinant plasmids capable to replication in B. subtilis and E. coli.

Summary The plasmid pBC16 (4.25 kbases), originally isolated from Bacillus cereus, determines tetracycline resistance and can be transformed into competent cells of B. subtilis. A miniplasmid of pBC16 (pBC16-1), 2,7 kb) which has lost an EcoRI fragment of pBC16 retains the replication functions and the tetracycline resistance. This plasmid which carries only one EcoRI site has been joined in vitro to pBS1, a cryptic plasmid previously isolated from B. subtilis and shown to carry also a single EcoRI site (Bernhard et al., 1978). The recombinant plasmid is unstable and dissociates into the plasmid pBS161 (8.2 kb) and the smaller plasmid pBS162 (2.1 kb). Plasmid pBS161 retains the tetracycline resistance. It possesses a single EcoRI site and 6 HindIII sites. The largest HindIII fragment of pBS161 carries the tetracycline resistance gene and the replication function. After circularization in vitro of this fragment a new plasmid, pBS161-1 is generated, which can be used as a HindIII and EcoRI cloning vector in Bacillus subtilis.Hybrid plasmids consisting of the E. coli plasmids pBR322, pWL7 or pAC184 and different HindIII fragments of pBS161 were constructed in vitro. Hybrids containing together with the E. coli plasmid the largest HindIII fragment of pBS161 can replicate in E. coli and B. subtilis. In E. coli only the replicon of the E. coli plasmid part is functioning whereas in B. subtilis replication of the hybrid plasmid is under the control of the Bacillus replicon. The tetracycline resistance of the B. subtilis plasmid is expressed in E. coli, but several antibiotic resistances of the E. coli plasmids (ampicillin, kanamycin and chloramphenicol) are not expressed in B. subtilis. The hybrid plasmids seem to be more unstable in B. subtilis than in E. coli.     

A bifunctional plasmid carrying the recA gene of E. coli

Summary To investigate the effect of an active, plasmid-carried recA gene on the stability and/or the expression of plasmid genes in different genetic backgrounds, we have constructed a bifunctional plasmid (able to replicate in Escherichia coli and in Bacillus subtilis). Chimeric plasmids were obtained by inserting pC194 (Ehrlich 1977) into pDR1453 (Sancar and Rupp 1979). pDR1453 is a 12.9 Kbp plasmid constructed by inserting an E. coli chromosome fragment carrying the recA gene into pBR322. The expected bifunctional recombinant (pMR22/1) (15.7 Kbp) was easily obtained but surprisingly the Cm resistance was expressed only at a very low level in E. coli (as compared, for example, to pHV14, pHV15). We attribute this effect to the presence of multiple recA genes in the cell. On the contrary, Cm^r E. coli transformants bear a recombinant plasmid (pMR22/n) containing tandemly repeated copies of pC194 in equilibrium with excised free pC194. Such amplification has never been observed in a Rec^- background and is therefore mediated by the recA genes. Growth of these clones in the absence of Cm causes the loss of the extra copies, yielding a plasmid with a single copy of pC194, indistingishable from pMR22/1. Interestingly, we have observed that deletions occur at high frequency in pC194, which drastically increase Cm^r in E. coli containing plasmids with a single copy of pC194. Two types of such deletions were detected: (a) large 1050 bp deletions covering about onethird of pC194 and (b) small 120–150 bp deletions (near the MspI site) in the region containing the replicative functions of pC194 (Horinouchi and Weisblum 1982). Both types of deletion render the recombinant plasmid unable to replicate in B. subtilis. pM22/1 replicates, although with a low copy-number, and is stable in B. subtilis wild type; the recA gene of E. coli does not complement any of the rec ^- mutations of B. subtilis. A strong instability, mainly of the E. coli and pBR322 sequences, was observed in many dna and rec mutants of B. subtilis yielding smaller plasmid with a much higher copy-number.     

Integration of vector-containing Bacillus subtilis chromosomal DNA by a Campbell-like mechanism

Summary Using plasmid pHV60, which contains a chloramphenicol resistance (Cm^r) gene that is expressed in Bacillus subtilis, a set of transformation-deficient strains of B. subtilis was isolated by insertional mutagenesis. When chromosomal DNA from these mutants was used to transform a transformation-proficient B. subtilis strain, almost all of the Cm^r transformants had the mutant phenotype as expected. However, with a frequency of approximately 3×10^-4 atypical transformants with the wild-type phenotype were produced. Data concerning amplification of the DNA containing the Cm^r marker and duplication of DNA sequences are presented that suggest that these atypical transformants are the result of a Campbell-like integration of the chromosomal DNA containing the integrated plasmid. Transductional mapping showed that in the atypical transformants the vector-containing DNA had a strong tendency to integrate at sites adjacent to the original site of integration, although integration at sites elsewhere on the chromosome was also observed. The production of atypical transformants is explained on the basis of integration of chromosomal DNA by a Campbell-like mechanism. Circularization of vector-containing chromosomal DNA is thought to occur through joining of the extremities of single-stranded DNA molecules by fortuitous base pairing with an independently entered single-stranded DNA molecule.     

Cloning and expression inEscherichia coli of the sucrase gene fromBacillus subtilis

Summary A recombinant cosmid carrying the sucrase gene (sacA) was obtained from a colony bank ofE. coli harboring recombinant cosmids representative of theB. subtilis genome. It was shown that thesacA gene is located in a 2 kbEcoRI fragment and that the cloned sequence is homologous to the corresponding chromosomal DNA fragment. A fragment of 2 kb containing the gene was subcloned in both orientations in the bifunctional vector pHV33 and expression was further looked for inB. subtilis andE. coli. Complementation of asacA mutation was observed in Rec⁺ and Rec^- strains ofB. subtilis. Expression of sucrase was also demonstrated inE.coli, which is normally devoid of this activity, by SDS-polyacrylamide gel electrophoresis, specific immunoprecipitation and assay of the enzyme in crude extracts. The specific activity of the enzyme depended on the orientation of the inserted fragment. The saccharolytic activity was found to be cryptic inE. coli since the presence of the recombinant plasmids did not allow the transport of [U¹⁴C] sucrose and the growth of the cells.It was shown also that the recombinant cosmid contained part of the neighboring locus (sacP) which corresponds to a component of the PEP-dependent phosphotransferase system of sucrose transport ofB. subtilis.     

Expression of a Thermomonospora fusca Cellulase Gene in Streptomyces lividans and Bacillus subtilis

A cellulase gene from Thermomonospora fusca coding for endocellulase E₅ was introduced into Streptomyces lividans by using shuttle plasmids that can replicate in either S. lividans or Escherichia coli. Plasmid DNA isolated from E. coli was used to transform S. lividans, selecting for thiostrepton resistance. The transformants expressed and excreted the endocellulase, but the ability to produce the endocellulase was unstable. This instability was shown to result from deletion of the endocellulase gene from the plasmid. Plasmid DNA prepared from a culture in which plasmid modification had occurred was used to transform E. coli, selecting for Amp⁺ cells, and all of the transformants were cellulase positive, showing that pBR322 and T. fusca DNA were deleted together. When a plasmid was constructed containing only T. fusca DNA in plasmid pIJ702, the transformants were more stable, and the level of endocellulase activity produced in the culture supernatant after growth on 0.2% glucose was close to the level produced by T. fusca cultures grown on 0.2% cellulose. About 50% of the total protein in the culture supernatant of the S. lividans transformant was endocellulase E₅. The enzyme produced by the S. lividans transformant was identical to pure T. fusca E₅ in its electrophoretic mobility and was completely inhibited by antiserum to E₅. Shuttle plasmids containing the E₅ gene that could replicate in Bacillus subtilis and E. coli were also constructed and used to transform B. subtilis. Again there was extensive deletion of the plasmid DNA during transformation and growth in B. subtilis. There was no evidence of E₅ activity, even in those B. subtilis transformants that retained the E₅ gene.     

Functional Analysis of Three Plasmids from Lactobacillus plantarum

Lactobacillus plantarum WCFS1 harbors three plasmids, pWCFS101, pWCFS102, and pWCFS103, with sizes of 1,917, 2,365, and 36,069 bp, respectively. The two smaller plasmids are of unknown function and contain replication genes that are likely to function via the rolling-circle replication mechanism. The host range of the pWCFS101 replicon includes Lactobacillus species and Lactococcus lactis, while that of the pWCFS102 replicon also includes Carnobacterium maltaromaticum and Bacillus subtilis. The larger plasmid is predicted to replicate via the theta-type mechanism. The host range of its replicon seems restricted to L. plantarum. Cloning vectors were constructed based on the replicons of all three plasmids. Plasmid pWCFS103 was demonstrated to be a conjugative plasmid, as it could be transferred to L. plantarum NC8. It confers arsenate and arsenite resistance, which can be used as selective markers.     

Cloning and expression of Bacillus subtilis spore genes

Summary Two spore genes, spoOB and spoIIG have been cloned from the B. subtilis genome library, constructed by ligating Sau3A partially digested DNA to the dephosphorylated pHV33 plasmid vector at its BamH1 site.An hybrid plasmid pGsOB2, carrying a 1.7 Kb insert of B. subtilis DNA amplifiable in E. coli was cloned. This recombinant plasmid was capable of transforming the appropriate B. subtilis Rec⁺ and Rec^- recipients to Spo⁺ at very high efficiency. The pGsOB2 was further subcloned and four hybrid plasmids, pGsOB8, pGsOB9, pGsOB10 and pGsOB11 were selected and their restriction enzyme maps established. The four subcloned hybrid plasmids retained their entire transforming activity in both Rec⁺ and Rec^- recipients although two of them carry the insert in an inverse orientation, indicating thus, that the spoOB gene in these plasmids is being transcribed by the B. subtilis RNA polymerase using an internal promotor of the cloned DNA fragment. The adjacent genes spoIVF and pheA, mapped respectively to the right and left of the spoOB locus, that normally show 90% cotransformation, are absent on the cloned DNA fragments. The cloned hybrid plasmids have been expressed in E. coli minicells and it was shown that the spoOB locus encoded a polypeptide of 24 K.We have also cloned the spoIIG gene in two hybrid plasmids, pGsIIG24 and pGsIIG26, carrying respectively inserts of 2 and 3 Kb. From the transforming activity and the endonuclease cleavage maps it was shown that these two hybrid plasmids do not carry the entire spoIIG locus. The use of these plasmids for further cloning of this gene is discussed.     

Construction of a new shuttle vector pSTE33 and its stabilities in Bacillus stearothermophilus,bacillus subtilis,and Escherichia coli

Summary A shuttle vector that could replicate in B. stearothermophilus, B. subtilis, and E. coli was constructed from B. stearothermophilus cryptic plasmid pSTK1, E. coli vector pUC19, and a thermostable kanamycin-resistance marker. This new vector was stably maintained in B. stearothermophilus at 67°C without selective pressure.     

Generation of Enterobacter sp. YSU Auxotrophs Using Transposon Mutagenesis

Prototrophic bacteria grow on M-9 minimal salts medium supplemented with glucose (M-9 medium), which is used as a carbon and energy source. Auxotrophs can be generated using a transposome. The commercially available, Tn5-derived transposome used in this protocol consists of a linear segment of DNA containing an R6Kγ replication origin, a gene for kanamycin resistance and two mosaic sequence ends, which serve as transposase binding sites. The transposome, provided as a DNA/transposase protein complex, is introduced by electroporation into the prototrophic strain, Enterobacter sp. YSU, and randomly incorporates itself into this host’s genome. Transformants are replica plated onto Luria-Bertani agar plates containing kanamycin, (LB-kan) and onto M-9 medium agar plates containing kanamycin (M-9-kan). The transformants that grow on LB-kan plates but not on M-9-kan plates are considered to be auxotrophs. Purified genomic DNA from an auxotroph is partially digested, ligated and transformed into a pir⁺ Escherichia coli (E. coli) strain. The R6Kγ replication origin allows the plasmid to replicate in pir⁺ E. coli strains, and the kanamycin resistance marker allows for plasmid selection. Each transformant possesses a new plasmid containing the transposon flanked by the interrupted chromosomal region. Sanger sequencing and the Basic Local Alignment Search Tool (BLAST) suggest a putative identity of the interrupted gene. There are three advantages to using this transposome mutagenesis strategy. First, it does not rely on the expression of a transposase gene by the host. Second, the transposome is introduced into the target host by electroporation, rather than by conjugation or by transduction and therefore is more efficient. Third, the R6Kγ replication origin makes it easy to identify the mutated gene which is partially recovered in a recombinant plasmid. This technique can be used to investigate the genes involved in other characteristics of Enterobacter sp. YSU or of a wider variety of bacterial strains.     

Suppression of Co1E1 replication properties by the Inc P-1 plasmid RK2 in hybrid plasmids constructed in vitro.

Hybrid plasmids were constructed in vitro by linking the Inc P-1 broad host range plasmid RK2 to the colicinogenic plasmid ColE1 at their EcoRI endonuclease cleavage sites. These plasmids were found to be immune to colicin E1, non-colicin-producing, and to exhibit all the characteristics of RK2 including self-transmissibility. These joint replicons have a copy number of 5 to 7 per chromosome which is typical of RK2, but not ColE1. Unlike ColE1, the plasmids will not replicate in the presence of chloramphenicol and are maintained in DNA polymerase I mutants of Escherichia coli. In addition, only RK2 incompatibility is expressed, although functional ColE1 can be rescued from the hybrids by EcoRI cleavage. This suppression of ColE1 copy number and incompatibility was found to be a unique effect of plasmid size on ColE1 properties. However, the inhibition of ColE1 or ColE1-like plasmid replication in chloramphenicol-treated cells is a specific effect of RK2 or segments of RK2 (Cri⁺ phenotype). This phenomenon is not a function of plasmid size and requires covalent linkage of RK2 DNA to ColE1. A specific region of RK2 (50.4 to 56.4 × 10³ base-pairs) cloned in the ColE1-like plasmid pBR313 was shown to carry the genetic determinant(s) for expression of the Cri⁺ phenotype.     

Generation of deletions through a cis-acting mutation in plasmid pC194

Summary When plasmid pC194-1 is ligated to pBR322 to generate plasmid pHV15-1, deletions occur with high frequency within the joined pBR322 DNA. Generation of deletions is recE4 independent, and occurs in B. subtilis with a 1,000-fold higher frequency than in Escherichia coli. In the hybrid plasmid pVH15-1, deletion end-points are not at random, but at defined locations within pBR322. We propose that the base alteration, characterizing pC194-1, has stabilized within the plasmid a stem/loop structure, which acts as a deletion generator.     

A quantitative analysis of shotgun cloning in Bacillus subtilis protoplasts

Summary We used the Escherichia coli-Bacillus subtilis shuttle vector pHP13, which carries the replication functions of the cryptic B. subtilis plasmid pTA1060, to study the effects of BsuM restriction, plasmid size and DNA concentration on the efficiency of shotgun cloning of heterologous E. coli DNA in B. subtilis protoplasts. In a restriction-deficient strain, clones were obtained with low frequency (19% of the transformants contained a recombinant plasmid) and large inserts (>6 kb) were relatively rare (12% of the clones contained inserts in the range of 6–9 kb). The efficiency of shotgun cloning was severely reduced in restricting protoplasts: the class of large inserts (>6 kb) was under-represented in the clone bank (4% of the clones contained inserts in the range of 6–6.1 kb). Furthermore, BsuM restriction caused structural instability of some recombinant plasmids. Transformation of protoplasts with individual recombinant plasmids showed that plasmid size and transforming activity were negatively correlated. The size effect was most extreme with cut and religated plasmid DNA. The yield of clones was independent of the DNA concentration during transformation. It is therefore unlikely that clones were not detected because of simultaneous uptake of more than one plasmid. It is concluded that shotgun cloning in B. subtilis protoplasts is inferior to that in competent cells.     

Characterization of a cryptic plasmid from Lactobacillus fermentum KC5b and its use for constructing a stable Lactobacillus cloning vector

Lactobacillus fermentum KC5b, a strain originally isolated from the human vagina, contains a cryptic plasmid pKC5b. The sequence and genetic organization of the 4392-bp plasmid were determined. It contains two convergently oriented replicons, which are homologous to each other and to the stable replicon of the Enterococcus faecium plasmid pMBB1. The two replicons of pKC5b were used either individually or together to construct Lactobacillus–Escherichia coli shuttle plasmids. Only the plasmid pSP1 that carried both replicons transformed lactobacilli, suggesting a complementary function between the two replicons. Since the replicons had a high homology to those of other plasmids that replicate via a theta-like mechanism and no detectable single-stranded intermediates were found for the plasmid, it is possible that pKC5b may replicate via a theta-like mechanism. The new shuttle plasmid pSP1 has been transformed and stably maintained in several Lactobacillus strains. As an initial application, pSP1 was used to clone the S-layer protein gene (slpA) of Lactobacillus acidophilus ATCC 4356 into a heterologous vaginal Lactobacillus strain and achieved surface-bound expression of the protein.     

Asynchronous DNA Synthesis in a Duplicated Chromosomal Region of <Emphasis Type="Italic">Drosophila melanogaster</Emphasis>

THERE is a highly ordered temporal sequence in the replication of DNA in the polytene chromosomes of Drosophila^1–10. The mechanism underlying this replicative organization remains unknown, but it has been shown that homologous chromosome regions replicate their DNA synchronously whether or not they are paired¹¹ and, in the one case in which it has been studied, this synchrony remains evident even when one of the two homologous regions is translocated to an abnormal position¹². These observations suggest that an essential part of the system controlling replication pattern is located in each of the small chromosome regions, replication of which can be resolved autoradiographically. The simplest model consistent with these assumptions involves a chromosome constituted of numerous “replicons” with replication times geared to a common control mechanism but are independent of the anatomical ordering of the “replicons” within the genome.