Crystal structure of an in vivo HIV-1 protease mutant in complex with saquinavir: insights into the mechanisms of drug resistance

Saquinavir is a widely used HIV-1 protease inhibitor drug for AIDS therapy. Its effectiveness, however, has been hindered by the emergence of resistant mutations, a common problem for inhibitor drugs that target HIV-1 viral enzymes. Three HIV-1 protease mutant species, G48V, L90M, and G48V/L90M double mutant, are associated in vivo with saquinavir resistance by the enzyme (Jacobsen et al., 1996). Kinetic studies on these mutants demonstrate a 13.5-, 3-, and 419-fold increase in Ki values, respectively, compared to the wild-type enzyme (Ermolieff J, Lin X, Tang J, 1997, Biochemistry 36:12364-12370). To gain an understanding of how these mutations modulate inhibitor binding, we have solved the HIV-1 protease crystal structure of the G48V/L90M double mutant in complex with saquinavir at 2.6 A resolution. This mutant complex is compared with that of the wild-type enzyme bound to the same inhibitor (Krohn A, Redshaw S, Richie JC, Graves BJ, Hatada MH, 1991, J Med Chem 34:3340-3342). Our analysis shows that to accommodate a valine side chain at position 48, the inhibitor moves away from the protease, resulting in the formation of larger gaps between the inhibitor P3 subsite and the flap region of the enzyme. Other subsites also demonstrate reduced inhibitor interaction due to an overall change of inhibitor conformation. The new methionine side chain at position 90 has van der Waals interactions with main-chain atoms of the active site residues resulting in a decrease in the volume and the structural flexibility of S1/S1' substrate binding pockets. Indirect interactions between the mutant methionine side chain and the substrate scissile bond or the isostere part of the inhibitor may differ from those of the wild-type enzyme and therefore may facilitate catalysis by the resistant mutant.     

Kinetic studies of human immunodeficiency virus type 1 protease and its active-site hydrogen bond mutant A28S.

Human immunodeficiency virus type 1 (HIV-1) protease optimally catalyzes in the pH range of 4-6 in contrast to nearly all of the other eukaryotic aspartic proteases, which catalyze best in the pH range of 2-4. A possible structural reason for the higher optimal pH of HIV-1 protease is the absence of a hydrogen bond to the carboxyl group of active-site Asp25, which is nearly universally present in others. To investigate this hypothesis, we have mutated residue 28 in HIV-1 protease from alanine to serine. Both the wild-type and the mutant A28S enzymes have been overexpressed in Escherichia coli using a chemically synthesized gene and purified for a comparative study in enzyme kinetics. The kcat and Km values were determined by a radiometric assay for the wild-type enzyme from pH 3.2 to 7.0, and for the mutant enzyme from pH 3.2 to 6.0. The low pK values of the active site of the free enzyme, pKe1, are 3.3 and 3.4 for the wild-type and mutant enzymes, respectively. The low pK values of the active site of the enzyme bound to substrate, pKes1, are 5.1 and 4.3 for the wild-type and mutant enzymes, respectively. The high pK values of the free enzyme, pKe2, are 6.8 and 5.6, and the corresponding ones for the substrate-bound enzyme, pKes2, are 6.9 and 6.0 for the wild-type and mutant enzymes, respectively. The lowering of pK values in mutant HIV-1 protease indicates that the hydroxyl group of Ser28 forms a new hydrogen bond to active-site Asp25 to increase its acidity.     

Site-directed mutagenesis identifies catalytic residues in the active site of Escherichia coli phosphofructokinase.

Six active site mutants of Escherichia coli phosphofructokinase have been constructed and characterized using steady-state kinetics. All but one of the mutants (ES222) have significantly lower maximal activity, implicating these residues in the catalytic process. Replacement of Asp127, the key catalytic residue in the forward reaction with Glu, results in an enzyme with wild-type cooperative and allosteric behavior but severely decreased Fru6P binding. Replacement of the same residue with Tyr abolishes cooperativity while retaining sensitivity to allosteric inhibition and activation. Thus, this mutant has uncoupled homotropic from heterotropic allostery. Mutation of Asp103 to Ala results in an enzyme which retains wild-type Fru6P-binding characteristics with reduced activity. GDP, which allosterically activates the wild-type enzyme, acts as a mixed inhibitor for this mutant. Mutation of Thr125 to Ala and Asp129 to Ser produces mutants with impaired Fru6P binding and decreased cooperativity. In the presence of the activator GDP, both these mutants display apparent negative cooperativity. In addition, ATP binding is now allosterically altered by GDP. These results extend the number of active site residues known to participate in the catalytic process and help to define the mechanisms behind catalysis and homotropic and heterotropic allostery.     

Probing the S1/S1' substrate binding pocket geometry of HIV-1 protease with modified aspartic acid analogues

Aspartates 25 and 125, the active site residues of HIV-1 protease, participate functionally in proteolysis by what is believed to be a general acid-general base mechanism. However, the structural role that these residues may play in the formation and maintenance of the neighboring S1/S1' substrate binding pockets remains largely unstudied. Because the active site aspartic acids are essential for catalysis, alteration of these residues to any other naturally occurring amino acid by conventional site-directed mutagenesis renders the protease inactive, and hence impossible to characterize functionally. To investigate whether Asp-25 and Asp-125 may also play a structural role that influences substrate processing, a series of active site protease mutants has been produced in a cell-free protein synthesizing system via readthrough of mRNA nonsense (UAG) codons by chemically misacylated suppressor tRNAs. The suppressor tRNAs were activated with the unnatural aspartic acid analogues erythro-beta-methylaspartic acid, threo-beta-methylaspartic acid, or beta,beta-dimethylaspartic acid. On the basis of the specific activity measurements of the mutants that were produced, the introduction of the beta-methyl moiety was found to alter protease function to varying extents depending upon its orientation. While a beta-methyl group in the erythro orientation was the least deleterious to the specific activity of the protease, a beta-methyl group in the threo orientation, present in the modified proteins containing threo-beta-methylaspartate and beta,beta-dimethylaspartate, resulted in specific activities between 0 and 45% of that of the wild type depending upon the substrate and the substituted active site position. Titration studies of pH versus specific activity and inactivation studies, using an aspartyl protease specific suicide inhibitor, demonstrated that the mutant proteases maintained bell-shaped pH profiles, as well as suicide-inhibitor susceptibilities that are characteristic of aspartyl proteases. A molecular dynamics simulation of the beta-substituted aspartates in position 25 of HIV-1 protease indicated that the threo-beta-methyl moiety may partially obstruct the adjacent S1' binding pocket, and also cause reorganization within the pocket, especially with regard to residues Val-82 and Ile-84. This finding, in conjunction with the biochemical studies, suggests that the active site aspartate residues are in proximity to the S1/S1' binding pocket and may be spatially influenced by the residues presented in these pockets upon substrate binding. It thus seems possible that the catalytic residues cooperatively interact with the residues that constitute the S1/S1' binding pockets and can be repositioned during substrate binding to orient the active site carboxylates with respect to the scissile amide bond, a process that likely affects the facility of proteolysis.     

Structural implications of drug-resistant mutants of HIV-1 protease: high-resolution crystal structures of the mutant protease/substrate analogue complexes

Emergence of drug-resistant mutants of HIV-1 protease is an ongoing problem in the fight against AIDS. The mechanisms governing resistance are both complex and varied. We have determined crystal structures of HIV-1 protease mutants, D30N, K45I, N88D, and L90M complexed with peptide inhibitor analogues of CA-p2 and p2-NC cleavage sites in the Gag-pol precursor in order to study the structural mechanisms underlying resistance. The structures were determined at 1.55-1.9-A resolution and compared with the wild-type structure. The conformational disorder seen for most of the hydrophobic side-chains around the inhibitor binding site indicates flexibility of binding. Eight water molecules are conserved in all 9 structures; their location suggests that they are important for catalysis as well as structural stability. Structural differences among the mutants were analyzed in relation to the observed changes in protease activity and stability. Mutant L90M shows steric contacts with the catalytic Asp25 that could destabilize the catalytic loop at the dimer interface, leading to its observed decreased dimer stability and activity. Mutant K45I reduces the mobility of the flap and the inhibitor and contributes to an enhancement in structural stability and activity. The side-chain variations at residue 30 relative to wild-type are the largest in D30N and the changes are consistent with the altered activity observed with peptide substrates. Polar interactions in D30N are maintained, in agreement with the observed urea sensitivity. The side-chains of D30N and N88D are linked through a water molecule suggesting correlated changes at the two sites, as seen with clinical inhibitors. Structural changes seen in N88D are small; however, water molecules that mediate interactions between Asn88 and Thr74/Thr31/Asp30 in other complexes are missing in N88D.     

Active-site mobility in human immunodeficiency virus, type 1, protease as demonstrated by crystal structure of A28S mutant.

The mutation Ala28 to serine in human immunodeficiency virus, type 1, (HIV-1) protease introduces putative hydrogen bonds to each active-site carboxyl group. These hydrogen bonds are ubiquitous in pepsin-like eukaryotic aspartic proteases. In order to understand the significance of this difference between HIV-1 protease and homologous, eukaryotic aspartic proteases, we solved the three-dimensional structure of A28S mutant HIV-1 protease in complex with a peptidic inhibitor U-89360E. The structure has been determined to 2.0 A resolution with an R factor of 0.194. Comparison of the mutant enzyme structure with that of the wild-type HIV-1 protease bound to the same inhibitor (Hong L, Treharne A, Hartsuck JA, Foundling S, Tang J, 1996, Biochemistry 35:10627-10633) revealed double occupancy for the Ser28 hydroxyl group, which forms a hydrogen bond either to one of the oxygen atoms of the active-site carboxyl or to the carbonyl oxygen of Asp30. We also observed marked changes in orientation of the Asp25 catalytic carboxyl groups, presumably caused by the new hydrogen bonds. These observations suggest that catalytic aspartyl groups of HIV-1 protease have significant conformational flexibility unseen in eukaryotic aspartic proteases. This difference may provide an explanation for some unique catalytic properties of HIV-1 protease.     

Resistance mechanism revealed by crystal structures of unliganded nelfinavir-resistant HIV-1 protease non-active site mutants N88D and N88S

Nelfinavir is an inhibitor of HIV-1 protease, and is used for treatment of patients suffering from HIV/AIDS. However, treatment results in drug resistant mutations in HIV-1 protease. N88D and N88S are two such mutations which occur in the non-active site region of the enzyme. We have determined crystal structures of unliganded N88D and N88S mutants of HIV-1 protease to resolution of 1.65 Å and 1.8 Å, respectively. These structures refined against synchrotron data lead to R-factors of 0.1859 and 0.1780, respectively. While structural effects of N88D are very subtle, the mutation N88S has caused a significant conformational change in D30, an active site residue crucial for substrate and inhibitor binding.     

Insights into the functional role of protonation states in the HIV-1 protease-BEA369 complex: molecular dynamics simulations and free energy calculations

The molecular mechanics Poisson-Boltzmann surface area (MM-PBSA) method combined with molecular dynamics (MD) simulations were used to investigate the functional role of protonation in human immunodeficiency virus type 1 (HIV-1) protease complexed with the inhibitor BEA369. Our results demonstrate that protonation of two aspartic acids (Asp25/Asp25′) has a strong influence on the dynamics behavior of the complex, the binding free energy of BEA369, and inhibitor–residue interactions. Relative binding free energies calculated using the MM-PBSA method show that protonation of Asp25 results in the strongest binding of BEA369 to HIV-1 protease. Inhibitor–residue interactions computed by the theory of free energy decomposition also indicate that protonation of Asp25 has the most favorable effect on binding of BEA369. In addition, hydrogen-bond analysis based on the trajectories of the MD simulations shows that protonation of Asp25 strongly influences the water-mediated link of a conserved water molecule, Wat301. We expect that the results of this study will contribute significantly to binding calculations for BEA369, and to the design of high affinity inhibitors.     

Mutations of endo-beta-N-acetylglucosaminidase H active site residueAs sp130 anG glu132: activities and conformations

Endo-beta-N-acetylglucosaminidase H hydrolyzes the beta-(1-4)-glycosidic link of the N,N'-diacetylchitobiose core of high-mannose and hybrid asparagine-linked oligosaccharides. Seven mutants of the active site residues, Asp130 and Glu132, have been prepared, assayed, and crystallized. They include single site mutants of each residue to the corresponding amide, to Ala and to the alternate acidic residue, and to the double amide mutant. The mutants of Asp130 are more active than the corresponding Glu132 mutants, consistent with the assignment of the latter residue as the primary catalytic residue. The amide mutants are more active than the alternate acidic residue mutants, which in turn are more active than the Ala mutants. The structures of the Asn mutant of Asp130 and the double mutant are very similar to that of the wild-type enzyme. Several residues surrounding the mutated residues, including some that form part of the core of the beta-barrel and especially Tyr168 and Tyr244, adopt a very different conformation in the structures of the other two mutants of Asp130 and in the Asp mutant of Glu132. The results show that the residues in the upper layers of the beta-barrel can organize into two very distinct packing arrangements that depend on subtle electrostatic and steric differences and that greatly affect the geometry of the substrate-binding cleft. Consequently, the relative activities of several of the mutants are defined by structural changes, leading to impaired substrate binding, in addition to changes in functionality.     

Unique thermodynamic response of tipranavir to human immunodeficiency virus type 1 protease drug resistance mutations

Drug resistance is a major problem affecting the clinical efficacy of antiretroviral agents, including protease inhibitors, in the treatment of infection with human immunodeficiency virus type 1 (HIV-1)/AIDS. Consequently, the elucidation of the mechanisms by which HIV-1 protease inhibitors maintain antiviral activity in the presence of mutations is critical to the development of superior inhibitors. Tipranavir, a nonpeptidic HIV-1 protease inhibitor, has been recently approved for the treatment of HIV infection. Tipranavir inhibits wild-type protease with high potency (K(i) = 19 pM) and demonstrates durable efficacy in the treatment of patients infected with HIV-1 strains containing multiple common mutations associated with resistance. The high potency of tipranavir results from a very large favorable entropy change (-TDeltaS = -14.6 kcal/mol) combined with a favorable, albeit small, enthalpy change (DeltaH = -0.7 kcal/mol, 25 degrees C). Characterization of tipranavir binding to wild-type protease, active site mutants I50V and V82F/I84V, the multidrug-resistant mutant L10I/L33I/M46I/I54V/L63I/V82A/I84V/L90M, and the tipranavir in vitro-selected mutant I13V/V32L/L33F/K45I/V82L/I84V was performed by isothermal titration calorimetry and crystallography. Thermodynamically, the good response of tipranavir arises from a unique behavior: it compensates for entropic losses by actual enthalpic gains or by sustaining minimal enthalpic losses when facing the mutants. The net result is a small loss in binding affinity. Structurally, tipranavir establishes a very strong hydrogen bond network with invariant regions of the protease, which is maintained with the mutants, including catalytic Asp25 and the backbone of Asp29, Asp30, Gly48 and Ile50. Moreover, tipranavir forms hydrogen bonds directly to Ile50, while all other inhibitors do so by being mediated by a water molecule.     

Proteolysis of an active site peptide of lactate dehydrogenase by human immunodeficiency virus type 1 protease.

The muscle and heart lactate dehydrogenase (LDHs) of rabbit and pig are specifically cleaved at a single position by HIV-1 protease, resulting in the conversion of 36-kDa subunits of the oligomeric enzymes into 21- and 15-kDa protein bands as analyzed by SDS-PAGE. While the proteolysis was observed at neutral pH, it became more pronounced at pH 6.0 and 5.0. The time courses of the cleavage of the 36-kDa subunits were commensurate with the time-dependent loss of both quaternary structure and enzymatic activity. These results demonstrated that deoligomerization of rabbit muscle LDH at acidic pH rendered its subunits more susceptible to proteolysis, suggesting that a partially denatured form of the enzyme was the actual substrate. Proteolytic cleavage of the rabbit muscle enzyme occurred at a decapeptide sequence, His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp (scissile bond denoted throughout by an asterisk), which constitutes a "strand-loop" element in the muscle and heart LDH structures and contains the active site histidyl residue His-193. The kinetic parameters Km, Vmax/KmEt, and Vmax/Et for rabbit muscle LDH and the synthetic decapeptide Ac-His-Gly-Trp-Ile-Leu*Gly-Glu-His-Gly-Asp-NH2 were nearly identical, suggesting that the decapeptide within the protein substrate is conformationally mobile, as would be expected for the peptide substrate in solution. Insertion of part of this decapeptide sequence into bacterial galactokinase likewise rendered this protein susceptible to proteolysis by HIV-1 protease, and site-directed mutagenesis of this peptide in galactokinase revealed that the Glu residue at the P2' was important to binding to HIV-1 protease. Crystallographic analysis of HIV-1 protease complexed with a tight-binding peptide analogue inhibitor derived from this decapeptide sequence revealed that the "strand-loop" structure of the protein substrate must adopt a beta-sheet structure upon binding to the protease. The Glu residue in the P2' position of the inhibitor likely forms hydrogen-bonding interactions with both the alpha-amide and gamma-carboxylic groups of Asp-30 in the substrate binding site.     

Suppression of HIV-1 protease inhibitor resistance by phosphonate-mediated solvent anchoring

The introduction of human immunodeficiency virus type 1 (HIV-1) protease inhibitors (PIs) markedly improved the clinical outcome and control of HIV-1 infection. However, cross-resistance among PIs due to a wide spectrum of mutations in viral protease is a major factor limiting their broader clinical use. Here we report on the suppression of PI resistance using a covalent attachment of a phosphonic acid motif to a peptidomimetic inhibitor scaffold. The resulting phosphonate analogs maintain high binding affinity to HIV-1 protease, potent antiretroviral activity, and unlike the parent molecules, display no loss of potency against a panel of clinically important PI-resistant HIV-1 strains. As shown by crystallographic analysis, the phosphonate moiety is highly exposed to solvent with no discernable interactions with any of the enzyme active site or surface residues. We term this effect "solvent anchoring" and demonstrate that it is driven by a favorable change in the inhibitor binding entropy upon the interaction with mutant enzymes. This type of thermodynamic behavior, which was not found with the parent scaffold fully buried in the enzyme active site, is a result of the increased degeneracy of inhibitor binding states, allowing effective molecular adaptation to the expanded cavity volume of mutant proteases. This strategy, which is applicable to various PI scaffolds, should facilitate the design of novel PIs and potentially other antiviral therapeutics.     

High resolution crystal structures of HIV-1 protease with a potent non-peptide inhibitor (UIC-94017) active against multi-drug-resistant clinical strains

The compound UIC-94017 (TMC-114) is a second-generation HIV protease inhibitor with improved pharmacokinetics that is chemically related to the clinical inhibitor amprenavir. UIC-94017 is a broad-spectrum potent inhibitor active against HIV-1 clinical isolates with minimal cytotoxicity. We have determined the high-resolution crystal structures of UIC-94017 in complexes with wild-type HIV-1 protease (PR) and mutant proteases PR(V82A) and PR(I84V) that are common in drug-resistant HIV. The structures were refined at resolutions of 1.10-1.53A. The crystal structures of PR and PR(I84V) with UIC-94017 ternary complexes show that the inhibitor binds to the protease in two overlapping positions, while the PR(V82A) complex had one ordered inhibitor. In all three structures, UIC-94017 forms hydrogen bonds with the conserved main-chain atoms of Asp29 and Asp30 of the protease. These interactions are proposed to be critical for the potency of this compound against HIV isolates that are resistant to multiple protease inhibitors. Other small differences were observed in the interactions of the mutants with UIC-94017 as compared to PR. PR(V82A) showed differences in the position of the main-chain atoms of residue 82 compared to PR structure that better accommodated the inhibitor. Finally, the 1.10A resolution structure of PR(V82A) with UIC-94017 showed an unusual distribution of electron density for the catalytic aspartate residues, which is discussed in relation to the reaction mechanism.     

A major role for a set of non-active site mutations in the development of HIV-1 protease drug resistance

A major problem in the chemotherapy of HIV-1 infection is the appearance of drug resistance. In the case of HIV-1 protease inhibitors, resistance originates from mutations in the protease molecule that lower the affinity of inhibitors while still maintaining a viable enzymatic profile. Drug resistance mutations can be classified as active site or non-active site mutations depending on their location within the protease molecule. Active site mutations directly affect drug/target interactions, and their action can be readily understood in structural terms. Non-active site mutations influence binding from distal locations, and their mechanism of action is not immediately apparent. In this paper, we have characterized a mutant form of the HIV-1 protease, ANAM-11, identified in clinical isolates from HIV-1 infected patients treated with protease inhibitors. This mutant protease contains 11 mutations, 10 of which are located outside the active site (L10I/M36I/S37D/M46I/R57K/L63P/A71V/G73S/L90M/I93L) and 1 within the active site (I84V). ANAM-11 lowers the binding affinity of indinavir, nelfinavir, saquinavir, and ritonavir by factors of 4000, 3300, 5800, and 80000, respectively. Surprisingly, most of the loss in inhibitor affinity is due to the non-active site mutations as demonstrated by additional experiments performed with a protease containing only the 10 non-active site mutations (NAM-10) and another containing only the active site mutation (A-1). Kinetic analysis with two different substrates yielded comparable catalytic efficiencies for A-1, ANAM-11, NAM-10, and the wild-type protease. These studies demonstrate that non-active site mutations can be the primary source of resistance and that their role is not necessarily limited to compensate deleterious effects of active site mutations. Analysis of the structural stability of the proteases by differential scanning calorimetry reveals that ANAM-11 and NAM-10 are structurally more stable than the wild-type protease while A-1 is less stable. Together, the binding and structural thermodynamic results suggest that the non-active site mutants affect inhibitor binding by altering the geometry of the binding site cavity through the accumulation of mutations within the core of the protease molecule.     

Reduced-bond tight-binding inhibitors of HIV-1 protease. Fine tuning of the enzyme subsite specificity.

Truncation of a peptide substrate in the N-terminus and replacement of its scissile amide bond with a non-cleavable reduced bond results in a potent inhibitor of HIV-1 protease. A series of such inhibitors has been synthesized, and S2-S3' subsites of the protease binding cleft mapped. The S2 pocket requires bulky Boc or PIV groups, large aromatic Phe residues are preferred in P1 and P1' and Glu in P2'. The S3' pocket prefers Phe over small Ala or Val. Introduction of a Glu residue into the P2' position yields a tight-binding inhibitor of HIV-1 protease, Boc-Phe-[CH2-NH]-Phe-Glu-Phe-OMe, with a subnanomolar inhibition constant. The relevant peptide derived from the same amino acid sequence binds to the protease with a Ki of 110 nM, thus still demonstrating a good fit of the amino acid residues into the protease binding pockets and also the importance of the flexibility of P1-P1' linkage for proper binding. A new type of peptide bond mimetic, N-hydroxylamine -CH2-N(OH)-, has been synthesized. Binding of hydroxylamino inhibitor of HIV-1 protease is further improved with respect to reduced-bond inhibitor.     

Crystal structures of highly constrained substrate and hydrolysis products bound to HIV-1 protease. Implications for the catalytic mechanism

HIV-1 protease is a key target in treating HIV infection and AIDS, with 10 inhibitors used clinically. Here we used an unusual hexapeptide substrate, containing two macrocyclic tripeptides constrained to mimic a beta strand conformation, linked by a scissile peptide bond, to probe the structural mechanism of proteolysis. The substrate has been cocrystallized with catalytically active synthetic HIV-1 protease and an inactive isosteric (D25N) mutant, and three-dimensional structures were determined (1.60 A). The structure of the inactive HIVPR(D25N)/substrate complex shows an intact substrate molecule in a single orientation that perfectly mimics the binding of conventional peptide ligands of HIVPR. The structure of the active HIVPR/product complex shows two monocyclic hydrolysis products trapped in the active site, revealing two molecules of the N-terminal monocyclic product bound adjacent to one another, one molecule occupying the nonprime site, as expected, and the other monocycle binding in the prime site in the reverse orientation. The results suggest that both hydrolysis products are released from the active site upon cleavage and then rebind to the enzyme. These structures reveal that N-terminal binding of ligands is preferred, that the C-terminal site is more flexible, and that HIVPR can recognize substrate shape rather than just sequence alone. The product complex reveals three carboxylic acids in an almost planar orientation, indicating an unusual hexagonal homodromic complex between three carboxylic acids. The data presented herein regarding orientation of catalytic aspartates support the cleavage mechanism proposed by Northrop. The results imply strategies for design of inhibitors targeting the N-terminal side of the cleavage site or taking advantage of the flexibility in the protease domain that accommodates substrate/inhibitor segments C-terminal to the cleavage site.     

Mechanism of aspartyl proteinase action. VII. Noncovalent complexes of HIV-1 aspartyl proteinase with substrate and substrate-like inhibitors

A computer model of a noncovalent complex of HIV-1 aspartyl protease with substrate-like inhibitor JG-365 was a priori constructed by using the approaches of theoretical conformational analysis and molecular mechanics. The root mean square deviation of the calculated conformation of the inhibitor from the X-ray diffraction analysis data was 0.87 A. These results enabled the a priori calculation of the structure of noncovalent complex of HIV-1 protease with a hexapeptide fragment of its native specific substrate Ser-Gln-Asn-Tyr-Pro-Ile-Val. The only possible orientation of the cleavable peptide bond in this and the nucleophilic water molecule relative to the catalytically active Asp residues of the enzyme (Asp25 and Asp125) was found that provides for the chemical transformation of the substrate to a tetrahedral intermediate. An action mechanism of enzymes of this class was proposed on the basis of the analysis of calculated distances. We showed that neither steric distortion of the cleavable bond nor the formation of unfavorable contacts in molecules of the enzymes and their substrates accompany the optimum orientation of substrate molecules at the active sites of HIV-1 aspartyl proteases and rhizopuspepsin.     

Interactions of a novel inhibitor from an extremophilic Bacillus sp. with HIV-1 protease: implications for the mechanism of inactivation

The active site cleft of the HIV-1 protease (PR) is bound by two identical conformationally mobile loops known as flaps, which are important for substrate binding and catalysis. The present article reports, for the first time, an HIV-1 PR inhibitor, ATBI, from an extremophilic Bacillus sp. The inhibitor is found to be a hydrophilic peptide with Mr of 1147, and an amino acid sequence of Ala-Gly-Lys-Lys-Asp-Asp-Asp-Asp-Pro-Pro-Glu. Sequence homology exhibited no similarity with the reported peptidic inhibitors of HIV-1 PR. Investigation of the kinetics of the enzyme-inhibitor interactions revealed that ATBI is a noncompetitive and tight binding inhibitor with the IC(50) and K(i) values 18.0 and 17.8 nm, respectively. The binding of the inhibitor with the enzyme and the subsequent induction of the localized conformational changes in the flap region of the HIV-1 PR were monitored by exploiting the intrinsic fluorescence of the surface exposed Trp-42 residues, which are present at the proximity of the flaps. We have demonstrated by fluorescence and circular dichroism studies that ATBI binds in the active site of the HIV-1 PR and thereby leads to the inactivation of the enzyme. Based on our results, we propose that the inactivation is due to the reorganization of the flaps impairing its flexibility leading toward inaccessibility of the substrate to the active site of the enzyme.     

Adaptability and flexibility of HIV-1 protease.

Even though more than 200 three-dimensional structures of HIV-1 protease complexed to a variety of inhibitors are available in the Protein Data Bank; very few structures of unliganded protein have been determined. We have recently solved structures of unliganded HIV-1 protease tethered dimer mutants to resolutions of 1.9 A and 2.1 A, and have found that the flaps assume closed-flap conformation even in the absence of any bound ligand. We report comparison of the unliganded closed-flap structure with structures of HIV-1 protease inhibitor complexes with a view to accurately identifying structural changes that the ligand can induce on binding to HIV-1 protease in the crystal. These studies reveal that the least flexible region present in the active site of HIV-1 protease need not also be the least adaptable to external stress, thus highlighting the conceptual difference between flexibility and adaptability of proteins in general.