Purification and characterization of a novel exocellular keratinase from Kocuria rosea

A keratinolytic protease activity secreted by Kocuria rosea when cultured in bioreactors using feathers as unique carbon and nitrogen source was purified and characterized. This novel keratinase activity was purified from the bioreaction broth growing media to apparent homogeneity after single step, (24-fold purification with a high yield of 54%) using DEAE column chromatography. The native molecular mass of the enzyme determined by gel filtration chromatography was 240 kDa. K. rosea extracellular keratinase was stable in a broad range of pH (8–11) and temperature (10–60 °C) profile with optimums at pH 10 and 40 °C. Crystalline soybean trypsin inhibitor (type I-S), 4-(2-aminoethyl) benzenesulfonyl floride (AEBSF) and chymostatin, strongly inhibited the keratinolytic activity indicating that the keratinase belongs to the serine protease family. The K_m for the soluble keratin degradation from feathers was 242 μM. The enzyme was resistant to denaturing or reducing agents such as dithiotreitol and 2-mercaptoethanol. All of the biochemical characteristics, raising the potential use of this enzyme in numerous industrial applications.     

Purification and characterization of an extracellular laccase from a Pseudomonas sp. LBC1 and its application for the removal of bisphenol A

The Pseudomonas sp. LBC1 produced extracellular laccase when grown in the nutrient broth. The enzyme was purified using acetone precipitation and an anion-exchange chromatography. The molecular weight of the purified laccase was estimated as 70 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis. An enzyme showed maximum substrate specificity towards o-tolidine than other substrates of laccase including 2,2′-azinobis, 3-ethylbenzothiazoline-6-sulfonic acid, hydroquinone, N,N′-dimethyl phenylene diamine, syringic acid and veratryl alcohol. The optimum pH and temperature for the laccase activity were 4.0 and 40 °C, respectively. Cyclic voltammogram revealed the redox potential of purified enzyme as 0.30 V. The laccase was stable up to 40 °C and within pH range 6.0–8.0. Sodium azide and EDTA strongly inhibited laccase activity. The purified laccase completely degraded the higher concentration of bisphenol A within 5 h. Biodegradation metabolites of bisphenol A were characterized by using FTIR, HPLC and GC–MS.     

A novel organic solvent-stable alkaline protease from organic solvent–tolerant Bacillus licheniformis YP1A

An organic solvent-stable alkaline protease producing bacterium was isolated from the crude oil contaminant soil and identified as Bacillus licheniformis. The enzyme retained more than 95% of its initial activity after pre-incubation at 40 °C for 1 h in the presence of 50% (v/v) organic solvents such as DMSO, DMF, and cyclohexane. The protease was active in a broad range of pH from 8.0 to 12.0 with the optimum pH 9.5. The optimum temperature for this protease activity was 60 °C, and the enzyme remained active after incubation at 50–60 °C for 1 h. This organic solvent-stable protease could be used as a biocatalyst for organic solvent-based enzymatic synthesis.     

Iron containing keratinolytic metallo-protease produced by Chryseobacterium gleum

Chryseobacterium gleum exhibited complete dissolution of whole chicken-feathers (10 g l^?1, pH 8) after 72 h at 30 °C through synthesis of keratinolytic protease when inoculated at 1% (v/v). This enzyme was purified to 67-fold with yield of 2.25% having a specific activity of 1670 U mg^?1 and ～36 kDa Mw. MALDI-TOF MS of this keratinase showed some similarity with the keratinase peptides of Bacillus subtilis (BOFXJ2). The keratinase action was inhibited by EDTA, iodoacetamide and metal ions like mercury, copper and zinc (1 mM each), while it was enhanced by iron and calcium. Keratinase showed presence of 3 mM of Fe M^?1 as tested by atomic absorption spectroscopy and addition of Fe in its apoenzyme retained about 79% of original residual feather degradation activity which portrayed it to be metalloprotease. Purified keratinase revealed significant degradation (85%) of feather concentrate (20 g l^?1) to 3.9 μM ml^?1 of free amino groups in 24 h at an initial pH of 8.0, 30 °C and 120 rpm shaking. This keratinase activity can be controlled precisely by presence of chemical or metal ions which could be of use in biotechnology industry while the culture can be used in poultry waste management.     

Purification and characterization of a highly selective glycyrrhizin-hydrolyzing β-glucuronidase from Penicillium purpurogenum Li-3

A novel β-glucuronidase from filamentous fungus Penicillium purpurogenum Li-3 was purified to electrophoretic homogeneity by ultrafiltration, ammonium sulfate precipitation, DEAE-cellulose ion exchange chromatography, and Sephadex G-100 gel filtration with an 80.7-fold increase in specific activity. The purified β-glucuronidase is a dimeric protein with an apparent molecular mass of 69.72 kDa (m/z = 69,717), determined by MALDI/TOF-MS. The optimal temperature and pH of the purified enzyme are 40 °C and 6.0, respectively. The enzyme is stable within pH 5.0–8.0, and the temperature up to 45 °C. Mg²⁺ ions enhanced the activity of the enzyme, Ca²⁺ and Al³⁺ showed no effect, while Mn²⁺, Zn²⁺, Hg²⁺ and Cu²⁺ substantially inhibited the enzymatic activity. The K_m and V_max values of the purified enzyme for glycyrrhizin (GL) were evaluated as 0.33 mM and 59.0 mmol mg^?1 min^?1, respectively. The purified enzyme displayed a highly selective glycyrrhizin-hydrolyzing property and converted GL directly to glycyrrhetic acid mono-glucuronide (GAMG), without producing byproduct glycyrrhetic acid (GA). The results suggest that the purified enzyme may have potential applications in bio-pharmaceutical and biotechnological industry.     

Hen egg white as a feeder protein for lipase immobilization

Enzyme stabilization via immobilization is one of the preferred processes as it provides the advantages of recovery and reusability. In this study, Thermomyces lanuginosus lipase has been immobilized through crosslinking using 2% glutaraldehyde and hen egg white, as an approach towards CLEA preparation. The immobilization efficiency and the properties of the immobilized enzyme in terms of stability to pH, temperature, and denaturants was studied and compared with the free enzyme. Immobilization efficiency of 56% was achieved with hen egg white. The immobilized enzyme displayed a shift in optimum pH towards the acidic side with an optimum at pH 4.0 whereas the pH optimum for free enzyme was at pH 6.0. The immobilized enzyme was stable at higher temperature retaining about 83% of its maximum activity as compared to the free enzyme retaining only 41% activity at 70 °C. The denaturation of lipase in free form was rapid with a half-life of 2 h at 60 °C and 58 min at 70 °C as compared to 12 h at 60 °C and 2 h at 70 °C for the immobilized enzyme. The effect of denaturants, urea and guanidine hydrochloride on the free and immobilized enzyme was studied and the immobilized enzyme was found to be more stable towards denaturants retaining 74% activity in 8 M urea and 98% in 6 M GndHCl as compared to 42% and 33% respectively in the case of free enzyme. The apparent K_m (2.08 mM) and apparent V_max (0.95 μmol/min) of immobilized enzyme was lower as compared to free enzyme; K_m (8.0 mM) and V_max (2.857 μmol/min). The immobilized enzyme was reused several times for the hydrolysis of olive oil.     

Immobilization of a keratinolytic protease from Purpureocillium lilacinum on genipin activated-chitosan beads

Keratinase from Purpureocillium lilacinum LPSC # 876 was immobilized on chitosan beads using two different cross-linking agents: glutaraldehyde and genipin. For its immobilization certain parameters were optimized such as cross-linker concentration, activation time and activation temperature. Under optimum conditions, enzyme immobilization resulted to be 96 and 92.8% for glutaraldehyde and genipin, respectively, with an activity recovery reaching up to 81% when genipin was used. The immobilized keratinase showed better thermal and pH stabilities compared to the soluble form, retaining more than 85% of its activity at pH 11 and 74% at 50 °C after 1 h of incubation. The residual activity of immobilized keratinase remained more than 60% of its initial value after five hydrolytic cycles. The results in this study support that glutaraldehyde could be replaced by genipin as an alternative cross-linking eco-friendly agent for enzyme immobilization.     

Production and characterization of a thermostable endo-type β-xylanase produced by a newly-isolated Streptomyces thermocarboxydus subspecies MW8 strain from Jeju Island

A xylanase-producing, Gram-positive, aerobic, and spore-forming bacterium was isolated from a soil sample collected from Jeju Island and was classified as a novel subspecies of Streptomyces thermocarboxydus on the basis of 16S rRNA gene sequence similarity, the results of DNA–DNA hybridization analysis, and phenotypic characteristics. The novel strain was named as S. thermocarboxydus subsp. MW8 (=KCTC29013 = DSM52054). This strain produced extracellular xylanase. Xylanase from the strain was purified to homogeneity and had an apparent molecular weight of 52 kDa. The NH₂-terminal sequence (Ala-Glu-Ile-Arg-Leu) was distinct from those of previously reported xylanases. The purified xylanase produced xylobiose as the end-product of birchwood xylan hydrolysis. The K_m and V_max values of the purified xylanase on birchwood xylan were 1.71 mg/ml and 357.14 U/mg, respectively. The optimum pH and temperature for the enzyme were found to be 7.0 and 50 °C, respectively, and the enzyme exhibited significant heat stability. In addition, the enzyme was active over broad pH ranges: 84% of the maximum activity at pH 5.0, 84–88% at pH 6.0, 88% at pH 8.0, and 75–81% (pH 9.0). These enzymatic properties may be very useful for use in bio-industrial applications.     

Immobilization of horseradish peroxidase on activated wool

This work is aimed to immobilize partially purified horseradish peroxidase (HRP) on wool activated by multifunctional reactive center, namely cyanuric chloride. The effect of cyanuric chloride concentration, pH and enzyme concentration on immobilization of HRP was studied. FT-IR and SEM analyses were detected for wool, activated wool and immobilized wool-HRP. The wool-HRP, prepared at 2% (w/v) cyanuric chloride and pH 5.0, retained 50% of initial activity after seven reuses. The wool-HRP showed broad optimum pH at 7.0 and 8.0, which was higher than that of the soluble HRP (pH 6.0). The soluble HRP had an optimum temperature of 30 °C, which was shifted to 40 °C for immobilized enzyme. The soluble and wool-HRP were stable up to 30 and 40 °C after incubation for 1 h, respectively. The apparent kinetic constant values (K_ms) of wool-HRP were 10 mM for guiacol and 2.5 mM for H₂O₂, which were higher than that of soluble HRP. The wool-HRP was remarkably more stable against proteolysis mediated by trypsin. The wool-HRP exhibited more resistance to heavy metal induced inhibition. The wool-HRP was more stable to the denaturation induced by urea, Triton X-100, isopropanol, butanol and dioxan. The wool-HRP was found to be the most stable under storage. In conclusion, the wool-HRP could be more suitable for several industrial and environmental purposes.     

Purification and characterization of trypsin from Luphiosilurus alexandri pyloric cecum

Trypsin from L. alexandri was purified using only two purification processes: ammonium sulfate precipitation and anion exchange liquid chromatography in DEAE-Sepharose. Trypsin mass was estimated as 24 kDa through SDS-PAGE, which showed only one band in silver staining. The purified enzyme showed an optimum temperature and pH of 50 °C and 9.0, respectively. Stability was well maintained, with high levels of activity at a pH of up to 11.0, including high stability at a temperature of up to 50 °C after 60 min of incubation. The inhibition test demonstrated strong inhibition by PMSF, a serine protease inhibitor, and Kinetic constants km and kcat for BAPNA were 0.517 mM and 5.0 S^?1, respectively. The purified enzyme was also as active as casein, as analyzed by zymography. Therefore, we consider trypsin a promising enzyme for industrial processes, owing to its stability in a wide range of pH and temperature and activity even under immobilization.     

Purification and characterization of cellulase from a marine Bacillus sp. H1666: A potential agent for single step saccharification of seaweed biomass

In this study, 115 marine bacterial isolates were screened for cellulase enzymatic activity and enzyme with a molecular mass of 40 kDa was purified from culture supernatant of the marine bacterium Bacillus sp. H1666 using ion exchange and size exclusion chromatography method. Growth of bacterial strain H1666 with efficient cellulase enzyme production was observed on untreated wheat straw and rice bran. The biochemical properties of the extracted cellulase were studied and enzyme was found active over a range of pH 3–9. The optimum cellulase activity was observed at pH 7 and temperature 50 °C. The enzyme was also shown to be slightly thermo-stable with 40% residual activity at 60 °C for 4 h. The potential applicability of enzyme was tested on dried green seaweed (Ulva lactuca) and 450 mg/g increase in glucose yield was obtained after saccharification. MALDI TOF–TOF analysis of cellulase peptide fingerprint showed similarity to the sequence of the glycoside hydrolase family protein.     

Purification and characterization of SDG-β-d-glucosidase hydrolyzing secoisolariciresinol diglucoside to secoisolariciresinol from Aspergillus oryzae

The SDG-β-d-glucosidase that hydrolyzes the glucopyranoside bond of secoisolariciresinol diglucoside (SDG) to release secoisolariciresinol (SECO) was isolated from Aspergillus oryzae 39 strain and the enzyme was purified and characterized. The enzyme was purified to one spot in SDS polyacrylamide gel electrophoresis, and its molecular weight was about 64.9 kDa. The optimum temperature of the SDG-β-d-glucosidase was 40 °C, and the optimum pH was 5.0. The SDG-β-d-glucosidase was stable at less than 65 °C, and pH 4.0–6.0. Ca²⁺, K⁺, Mg²⁺ and Na⁺ ions have no significant effect on enzyme activity, Zn²⁺ and Cu²⁺ ions have weakly effect on enzyme activity, but Fe³⁺ ion inhibits enzyme activity strongly. The K_m value of SDG-β-d-glucosidase was 0.14 mM for SDG.     

Arginase from Bacillus thuringiensis SK 20.001: Purification,characteristics, and implications for l-ornithine biosynthesis

An l-ornithine high producing strain Bacillus thuringiensis SK20.001 was screened by our laboratory. An intracellular arginase used to biosynthesize l-ornithine from the strain was purified and characterized. The final specific arginase activity was 589.2 units/mg, with 70.1 fold enrichment and 22.4% recovery. The molecular weight of the enzyme was approximately 33,000 Da as evaluated by SDS-PAGE and 191,000 Da as determined by gel filtration. The enzyme had an optimum pH of 10.0 and an optimum temperature of 40 °C. It was stable from pH 8.0–12.0 and <50 °C without Mn²⁺. The presence of Mn²⁺ and Ni²⁺ had strong effects on the enzyme activity, and Mn²⁺ significantly increased the thermal stability of the enzyme. The arginase was slightly inhibited by Ca²⁺, Fe²⁺ and Zn²⁺. Trp, Asp, Glu, Tyr, and Arg residues were directly involved in the arginase activity evaluated by chemical modifications. The K_m and V_max for l-arginine were estimated to be 15.6 mM and 538.9 μmol/min/mg. The biosynthesis yield of l-ornithine was 72.7 g/L with the enzyme.     

Purification and characterization of piceid-β-d-glucosidase from Aspergillus oryzae

The piceid-β-d-glucosidase that hydrolyzes the β-d-glucopyranoside bond of piceid to release resveratrol was isolated from Aspergillus oryzae sp.100 strain, and the enzyme was purified and characterized. The enzyme was purified to one spot in SDS polyacrylamide gel electrophoresis, and its molecular weight was about 77 kDa. The optimum temperature of the piceid-β-d-glucosidase was 60 °C, and the optimum pH was 5.0. The piceid-β-d-glucosidase was stable at less than 60 °C, and pH 4.0–5.0. Ca²⁺, Mg²⁺ and Zn²⁺ ions have no significant effect on enzyme activity, but Cu²⁺ ion inhibits enzyme activity strongly. The K_m value was 0.74 mM and the V_max value was 323 nkat mg⁻¹ for piceid.     

C-Terminal proline-rich sequence broadens the optimal temperature and pH ranges of recombinant xylanase from Geobacillus thermodenitrificans C5

Efficient utilization of hemicellulose entails high catalytic capacity containing xylanases. In this study, proline rich sequence was fused together with a C-terminal of xylanase gene from Geobacillus thermodenitrificans C5 and designated as GthC5ProXyl. Both GthC5Xyl and GthC5ProXyl were expressed in Escherichia coli BL21 host in order to determine effect of this modification. The C-terminal oligopeptide had noteworthy effects and instantaneously extended the optimal temperature and pH ranges and progressed the specific activity of GthC5Xyl. Compared with GthC5Xyl, GthC5ProXyl revealed improved specific activity, a higher temperature (70 °C versus 60 °C) and pH (8 versus 6) optimum, with broad ranges of temperature and pH (60–80 °C and 6.0–9.0 versus 40–60 °C and 5.0–8.0, respectively). The modified enzyme retained more than 80% activity after incubating in xylan for 3 h at 80 °C as compared to wild −type with only 45% residual activity. Our study demonstrated that proper introduction of proline residues on C-terminal surface of xylanase family might be very effective in improvement of enzyme thermostability. Moreover, this study reveals an engineering strategy to improve the catalytic performance of enzymes.     

Thermophilic lipase from Thermomyces lanuginosus: Gene cloning,expression and characterization

An extracellular lipase gene ln1 from thermophilic fungus Thermomyces lanuginosus HSAUP₀₃80006 was cloned through RT-PCR and RACE amplification. Its coding sequence predicted a 292 residues protein with a 17 amino acids signal peptide. The deduced amino acids showed 78.4% similarity to another lipase lgy from T. lanuginosus while shared low similarity with other fungi lipases. Higher frequencies hydrophobic amino acids related to lipase thermal stability, such as Ala, Val, Leu and Gly were observed in this lipase (named LN). The sequence, -Gly-His-Ser-Leu-Gly-, known as a lipase-specific consensus sequence of mould, was also found in LN. High level expression for recombinant lipase was achieved in Pichia pastoris GS115 under the control of strong AOX1 promoter. It was purified to homogeneity through only one step DEAE-Sepharose anion exchange chromatography and got activity of 1328 U/ml. The molecular mass of one single band of this lipase was estimated to be 33 kDa by SDS-PAGE. The enzyme was stable at 60 °C and kept 65% enzyme activity after 30 min incubation at 70 °C. It kept half-activity after incubated for 40 min at 80 °C. The optimum pH for enzyme activity was 9.0 and the lipase was stable from pH 8.0 to 12.0. Lipase activity was enhanced by Ca²⁺ and inhibited by Fe²⁺, Zn²⁺, K⁺, and Ag⁺. The cell-free enzyme hydrolyzed and synthesized esters efficiently, and the synthetic efficiency even reached 81.5%. The physicochemical and catalytic properties of the lipase are extensively investigated for its potential industrial applications.     

Purification and characterization of a novel laccase from the ascomycete Trichoderma atroviride: Application on bioremediation of phenolic compounds

The extracellular laccase produced by the ascomycete Trichoderma atroviride was purified and characterized and its ability to transform phenolic compounds was determined. The purified laccase had activity towards typical substrates of laccases including 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS), dimethoxyphenol (2,6-DMP), syringaldazine and hydroquinone. The enzyme was a monomeric protein with an apparent molecular mass of 80 kDa and an isoelectric point of 3.5. The pH optima for the oxidation of ABTS and 2,6-DMP were 3 and 5, respectively, and the optimum temperature was 50 °C with 2,6-DMP. The laccase was stable at slightly acidic pH (4 and 5). It retained 80% of its activity after 4 h incubation at 40 °C. Under standard assay conditions, K_m values of the enzyme were 2.5 and 1.6 mM towards ABTS and 2,6-DMP, respectively. This enzyme was able to oxidize aromatic compounds present in industrial and agricultural wastewater, as catechol and o-cresol, although the transformation of chlorinated phenols required the presence of ABTS as mediator.     

Calcium dependent,alkaline detergent-stable trypsin from the viscera of Goby (Zosterisessor ophiocephalus): Purification and characterization

An alkaline calcium dependent trypsin from the viscera of Goby (Zosterisessor ophiocephalus) was purified to homogeneity with a 16-fold increase in specific activity and 20% recovery. The purified trypsin appeared as a single band on sodium dodecyl sulphate-polyacrylamide gel (SDS-PAGE) and native-PAGE. The enzyme had an estimated molecular weight of 23.2 kDa.The optimum pH was 9.0, and the enzyme was extremely stable in various pH buffers between pH 7.0 and 11.0. The optimum temperature for enzyme activity was 60 °C, and the activity and stability of trypsin was highly dependent on the presence of calcium ion. At 60 °C, Ca²⁺ (5 mM) stimulated the protease activity by 220%. The trypsin kinetic constants, K_m and k_cat, were 0.312 mM and 2.03 s^?1.The enzyme showed high stability towards non-ionic surfactants and oxidizing agent. In addition, the enzyme showed excellent stability and compatibility with some commercial solid and liquid detergents.     

Degradation of chitin and production of bioactive materials by bioconversion of squid pens

Serratia marcescens TKU011, a protease- and chitosanase-producing bacterium, the optimized condition for protease and chitosanase production was found after the media were heated at 121 °C for 120 min and the culture was shaken at 25 °C for 5 days in 100 mL of medium containing 1% squid pen powder (SPP) (w/v), 0.1% K₂HPO₄, and 0.05% MgSO₄. An extracellular metalloprotease with novel properties of solvent stable, and alkaline was purified from the culture supernatant of S. marcescens TKU011 with squid pen wastes as the sole carbon/nitrogen source. The enzyme was a monomeric protease with a molecular mass of 48–50 kDa by SDS–PAGE and gel filtration chromatography. The optimum pH, optimum temperature, pH stability, and thermal stability of TKU011 protease were 8, 50 °C, pH 5–11, and <40 °C, respectively. Besides protease and chitosanase, with this method, deproteinization of squid pen for β-chitin, the production of peptide and reducing sugar may be useful for biological applications.     

Purification of a laccase from fungus combs in the nest of Odontotermes formosanus

A new enzyme was isolated from the fungus combs in the nest of Odontotermes formosanus and identified as a laccase. The single laccase was purified with a purification factor of 16.83 by ammonium sulphate precipitation and anion exchange chromatography, to a specific activity of 211.11 U mg⁻¹. Its molecular mass was 65 kDa. The optimum pH value and temperature were 4.0 °C and 10 °C with ABTS as the substrate, respectively. The enzyme activity stabilized at temperatures between 10 °C and 30 °C and decreased rapidly when the temperature was above 30 °C. The V_max and K_m values were 3.62 μmol min⁻¹ mg⁻¹ and 119.52 μM, respectively. Ethanol concentration affected laccase activity, inhibiting 60% of enzyme activity at a concentration of 70%. Metal ions of Mg²⁺, Ba²⁺ and Fe²⁺ showed inhibition on enzyme activity of 17.2%, 5.3% and 9.4%, respectively, with the increase of metal ions concentration from 1 mM to 5 mM. Especially Fe²⁺ strongly inhibited enzyme activity up to 89% inhibition at a concentration of 1 mM.