Loss of hydrogen atoms in H<Subscript>2</Subscript> plasma on the surfaces of materials used in EUV lithography

Low-pressure hydrogen is an important component of the working medium in extreme ultraviolet (EUV) projection lithography. Under the action of EUV photons and fast secondary electrons on the gas medium, plasma and atomic hydrogen, actively interacting with the surface, are produced. This interaction is very important, because it largely determines the lifetime of the multilayered EUV optics. In this study, the loss of atomic hydrogen under the conditions of a low pressure (<10 Torr) RF plasma discharge on the surfaces of materials used in EUV lithography is investigated. The surface loss probabilities of H atoms on these materials are measured. It is shown that surface recombination of atomic hydrogen goes according to the Eley-Rideal mechanism via direct recombination of H atoms from the gas phase with chemically and physically adsorbed atoms. In this case, the surface recombination probability is mainly determined by the density of chemical adsorption sites. The density of adsorption sites and the desorption energy of H atoms are estimated. The desorption energy of physically adsorbed H atoms on pure metal surfaces (or surfaces exposed to plasma) is about 0.5 eV, and the density of sorption sites is close to the surface density of atoms. This results in a high loss probability of H atoms on metals (∼0.1). Therefore, to provide efficient transportation of hydrogen atoms, it is necessary to use materials with the lowest loss probability of H atoms, i.e., dielectrics.     

Probabilistic Prediction of Contacts in Protein-Ligand Complexes

We introduce a statistical method for evaluating atomic level 3D interaction patterns of protein-ligand contacts. Such patterns can be used for fast separation of likely ligand and ligand binding site combinations out of all those that are geometrically possible. The practical purpose of this probabilistic method is for molecular docking and scoring, as an essential part of a scoring function. Probabilities of interaction patterns are calculated conditional on structural x-ray data and predefined chemical classification of molecular fragment types. Spatial coordinates of atoms are modeled using a Bayesian statistical framework with parametric 3D probability densities. The parameters are given distributions a priori, which provides the possibility to update the densities of model parameters with new structural data and use the parameter estimates to create a contact hierarchy. The contact preferences can be defined for any spatial area around a specified type of fragment. We compared calculated contact point hierarchies with the number of contact atoms found near the contact point in a reference set of x-ray data, and found that these were in general in a close agreement. Additionally, using substrate binding site in cathechol-O-methyltransferase and 27 small potential binder molecules, it was demonstrated that these probabilities together with auxiliary parameters separate well ligands from decoys (true positive rate 0.75, false positive rate 0). A particularly useful feature of the proposed Bayesian framework is that it also characterizes predictive uncertainty in terms of probabilities, which have an intuitive interpretation from the applied perspective.     

Engineering Grain Boundaries in Cu2ZnSnSe4 for Better Cell Performance: A First‐Principle Study

Through first‐principle density functional theory (DFT) calculations, the atomic structure and electronic properties of intrinsic and passivated Σ3 (114) grain boundaries (GBs) in Cu₂ZnSnSe₄ (CZTSe) are studied. Intrinsic GBs in CZTSe create localized deep states within the band gap and thus act as Shockley‐Read‐Hall recombination centers, which are detrimental to cell performance. Defects, such as Zn_Sn (Zn atoms on Sn sites), Na⁺_i (interstitial Na ions), and O_Se (O atoms on Se sites), prefer to segregate into GBs in CZTSe. The segregation of these defects at GBs exhibit two beneficial effects: 1) eliminating the deep gap states via wrong bonds breaking or weakening at GBs, making GBs electrically benign; and 2) creating hole barriers and electron sinkers, promoting effective charge separation at GBs. The results suggest a unique chemical approach for engineering GBs in CZTSe to achieve improved cell performance.     

Influence of the chlorine concentration on the radiation efficiency of a XeCl exciplex lamp

The influence of the chlorine concentration on the radiation efficiency of coaxial exciplex lamps (excilamps) excited by a dielectric barrier discharge (DBD) in binary Xe-Cl₂ mixtures at pressures of 240–250 Torr is investigated experimentally and theoretically. The experiments were carried out at Cl₂ concentrations in the range of 0.01–1%. The DBD characteristics were calculated in the framework of a one-dimensional hydrodynamic model at Cl₂ concentrations in the range of 0.1–5%. It is found that the radiation intensities of the emission bands of Xe*₂(172 nm) and XeCl* (308 nm) are comparable when the chlorine concentration in the mixture is in the range of 0.01–0.1%. In this case, in the mixture, the radiation intensity of the Xe*₂ molecule rapidly decreases with increasing Cl₂ concentration and, at a chlorine concentration of ≥0.2%, the radiation of the B → X band of XeCl* molecules with a peak at 308 nm dominates in the discharge radiation. The radiation efficiency of this band reaches its maximum value at chlorine concentrations in the range of 0.4–0.5%. The calculated efficiencies of DBD radiation exceed those obtained experimentally. This is due to limitations of the one-dimensional model, which assumes the discharge to be uniform in the transverse direction, whereas the actual excilamp discharge is highly inhomogeneous. The influence of the chlorine concentration on the properties of the DBD plasma in binary Xe-Cl₂ mixtures is studied numerically. It is shown that an increase in the Cl₂ concentration in the mixture leads to the attachment of electrons to chlorine atoms and a decrease in the electron density and discharge conductivity. As a result, the electric field and the voltage drop across the discharge gap increase, which, in turn, leads to an increase in the average electron energy and the probability of dissociation of Cl₂ molecules and ionization of Xe atoms and Cl₂ molecules. The total energy deposited in the discharge rises with increasing chlorine concentration due to an increase in the power spent on the heating of positive and negative ions. The power dissipated by electrons decreases with increasing chlorine concentration in the working mixture. Recommendations on the choice of the chlorine content in the mixture for reducing the intensity of VUV radiation of the second continuum of the Xe*₂ excimer without a substantial decrease in the excilamp efficiency are formulated.     

Theoretical study on the series of [Au3Cl3M2] complexes, with M = Li, Na, K, Rb, Cs

The prediction of the series of complexes [Au₃Cl₃M₂] with M = Li, Na, K, Rb and Cs, has been achieved at the ab initio level of theory. All geometries were fully optimized at the MP2 level of theory; the central Au₃ cluster is capped by chlorine atoms and the alkaline metals lie above and below the plane of the central ring; aurophilic interactions were found on the metal cluster, and also a strong aromatic character coming from the delocalized d-electrons of the Au atoms according to nuclear independent chemical shift calculations. On the other hand, the chemical hardness parameter was used to test the stability of the series of complexes, and the Fukui indexes of electrophilic and nucleophilic attack were employed to explore possible sites where chemical reactivity may play a role. Figure Molecular representations of the series of complexes [Au₃Cl₃M₂] (M = Li, Na, K, Rb, Cs) and their corresponding chemical hardness     

Main group metal halide complexes with sterically hindered thioureas part XVIII: The synthesis, characterization, and X-ray crystallographic study of a BiCl3 complex with 1-methyl-2(3H)-imidazolethione

A new bismuth(III) chloride complex with 1-methyl-2(3H)-imidazolethione (meimtH) has been synthesized and characterized via standard methods including solid state ¹³C nuclear magnetic resonance (NMR) and single crystal X-ray diffractometry. The complex, BiCl₃[meimtH]_2.5 · H₂O, crystallizes in a triclinic space group. The complex has two different coordination spheres for bismuth, which are linked together in the solid state via hydrogen bonding. One coordination sphere is distorted octahedral with the ligands in meridional positions, while the other is a dimer consisting of two octahedra sharing a common edge through bridging chlorine atoms. The ligands are cis to each other and trans to the chlorine bridges, while the remaining four chlorine atoms are trans to each other and perpendicular to the chlorine-sulfur plane. There is no strong evidence for a stereoactive lone pair in either coordination sphere.     

Effects of Pillar Height and Junction Depth on the Performance of Radially Doped Silicon Pillar Arrays for Solar Energy Applications

The effects of pillar height and junction depth on solar cell characteristics are investigated to provide design rules for arrays of such pillars in solar energy applications. Radially doped silicon pillar arrays are fabricated by deep reactive ion etching of silicon substrates followed by the introduction of dopant atoms by diffusion from a phosphorus oxide layer conformally deposited by low‐pressure chemical vapor deposition. Increasing the height of the pillars has led to doubling of the efficiency from 6% for flat substrates to 12% for 40 μm high pillars with a 900 nm junction depth because of an increase in the total junction area and lower optical reflection. For higher pillars, the current density and efficiency is decreased, which is attributed to the increasing presence of defect states at the surface introduced during the etching process. This effect can be counteracted by an Al₂O₃ passivation layer on the pillar surface. An optimum efficiency of 13% is found for a junction depth of 790 nm for 40 μm pillar height. At increased junction depths, the efficiency is decreased due to the ever thinner undoped core of the pillars, causing pillars with a large junction depth to become less efficient than flat silicon substrates.     

Quantum chemical studies on substitution effects within silyl group in the silylative coupling of olefins

In this study quantum chemical calculations based on the density functional theory (DFT) have been carried out to examine the effects of methoxy substituent attached to a silicon atom on the reaction of silylative coupling of olefins. It has been shown, that substituted substrate undergoes the reaction according to the recently proposed insertion-rotation-elimination mechanism. During the rotation around C-C single bond additional stabilization by oxygen-ruthenium interaction was observed. Similarly to the (trimethylsilyl)ethene the rate determining step of the reaction is the insertion of the alkene into Ru-Si single bond. The substitution of SiMe₃ by Si(OMe)₃ decreases the energy span of the reaction by almost 3 kcal mol^-1 that is from 21 kcal mol^-1 to 18 kcal mol^-1. The decrease of the energy barrier of the reaction seems to be the result of the increase of point charge differences between the Ru and Si atoms which increases electrostatic attraction between these atoms. Moreover, for Si(OMe)₃ the rate-determining transition state is closer to the alkene interacting with the Ru centre side of the reaction.     

Study on the role of SBA-15 in the oxidative dehydrogenation of n-butane over vanadia catalyst using density functional theory

The first step in the mechanism of n-butane oxidative dehydrogenation (ODH) on a V₄O₁₀ cluster and V₄O₁₀ supported SBA-15 is examined using DFT method. The activation and adsorption energies, oxidation state of V atoms are calculated. Over V₄O₁₀ the obtained results indicate that the activation of C-H bond of methylene group can occur at both the terminal and the bridging oxygen atoms with similar barrier (21.5–22.5 kcal mol^?1). The role of SBA-15 (with and without modification by Al) in n-butane adsorption step has been studied in detail. SBA-15 itself has mild effect on the reaction process, but the substitution of silicon atoms by aluminum atoms results in an active supporter for V₂O₅ in ODH reaction. In that, the ratio of Si/Al will decide the direction of initial interaction steps between n-butane and catalyst surface and it will result in the selectivity of the reaction products.

Decomposition of toluene in a steady-state atmospheric-pressure glow discharge

Results are presented from experimental studies of decomposition of toluene (C₆H₅CH₃) in a polluted air flow by means of a steady-state atmospheric pressure glow discharge at different water vapor contents in the working gas. The experimental results on the degree of C₆H₅CH₃ removal are compared with the results of computer simulations conducted in the framework of the developed kinetic model of plasma chemical decomposition of toluene in the N₂: O₂: H₂O gas mixture. A substantial influence of the gas flow humidity on toluene decomposition in the atmospheric pressure glow discharge is demonstrated. The main mechanisms of the influence of humidity on C₆H₅CH₃ decomposition are determined. The existence of two stages in the process of toluene removal, which differ in their duration and the intensity of plasma chemical decomposition of C₆H₅CH₃ is established. Based on the results of computer simulations, the composition of the products of plasma chemical reactions at the output of the reactor is analyzed as a function of the specific energy deposition and gas flow humidity. The existence of a catalytic cycle in which hydroxyl radical OH acts a catalyst and which substantially accelerates the recombination of oxygen atoms and suppression of ozone generation when the plasma-forming gas contains water vapor is established.     

A theoretical study on the halogen bonding interactions of C6F5I with a series of group 10 metal monohalides

The halogen bonding interactions between C₆F₅I and a series of transition metal monohalides trans-[M(X)(2-C₅NF₄)-(PR₃)₂] (M = Ni, Pd, Pt; X = F, Cl, Br; R = Me, Cy) have been studied with quantum chemical calculations. Optimized geometries of the halogen bonding complexes indicate that angles C₁-I···X are basically linear (178–180°) and angles I···X-M mainly range from 90 to 150°. The strength of these metal-influenced halogen bonds alters with different metal centers, metal-bound halogen atoms and the substitutes on phosphine ligands. Electrostatic potential and natural bond orbital analysis show that both of the electrostatic and orbital interactions make a contribution to the formation of halogen bonds, while the electrostatic term plays a dominant role. AIM analysis suggests that, for trans-[M(F)(2-C₅NF₄)-(PR₃)₂] (M = Ni, Pd, Pt) monomers, the formed halogen bonding complexes are stabilized by local concentration of the charge of intermediate character, while for the metal monomers containing chlorine and bromine, a typical closed-shell interaction exist. These results prove that the structures and geometries of these halogen bonding complexes can be tuned by changing the halogen atoms and metal centers, which may provide useful information for the design and synthesis of new functional materials.

Invasion of complementary oligonucleotides into (CA/TG)31 repetitive region of linear and circular DNA duplexes

(CA/TG)_n repeats belong to microsatellite DNA. They are the most abundant among the other dinucleotide repeats in mammals, constituting approximately 0.25% of the entire genome. These repeats are recombination hot spots; however, the corresponding mechanisms are yet vague. We postulated that one of the reasons underlying an increase in the recombination frequency in the repetitive region could be the con-formational characteristics of duplex resulting from a specific geometry of base-stacking contacts, providing for initiation of a single-stranded DNA invasion in th e duplex homologous regions. This work for the first time demonstrates a DNA-DNA interaction of the d(CA)₁₀ and d(TG)₁₀ oligonucleotides with linear and circular duplexes containing (CA/TG)₃₁ repeats during their coincubation in a protein-free water solution at 37°C. Using radioactively labeled oligonucleotides, we demonstrated that the duplex—oligonucleotide interaction intensity depended on the molar ratio of duplex-to-oligonucleotide at a duplex concentration of 30 nM. A decrease in this concentration to 3 nM had no effect on the intensity of oligonucleotide invasion. It was demonstrated that over 1% of the duplexes yet much less than 10% were involved in the interaction with oligonucleotides assuming that one oligonucleotide molecule interacted with one molecule of the duplex. Analysis of the kinetics showed that d(CA)₁₀ invasion commenced from the first minute of incubation with duplexes, while d(TG)₁₀ interacted with the duplex even at a higher rate. The role of conformational plasticity of CA/TG repeats in the discovered interaction is discussed as well as its biological significance, in particular, the role of CA microsatellites in the initiation of homologous recombination.     

Anomalous X-ray diffraction with soft X-ray synchrotron radiation.

Anomalous diffraction with soft X-ray synchrotron radiation opens new possibilities in protein crystallography and materials science. Low-Z elements like silicon, phosphorus, sulfur and chlorine become accessible as new labels in structural studies. Some of the heavy elements like uranium exhibit an unusually strong dispersion at their M(V) absorption edge (lambdaMV = 3.497 A, E(MV) = 3545 eV) and so does thorium. Two different test experiments are reported here showing the feasibility of anomalous X-ray diffraction at long wavelengths with a protein containing uranium and with a salt containing chlorine atoms. With 110 electrons the anomalous scattering amplitude of uranium exceeds by a factor of 4 the resonance scattering of other strong anomalous scatterers like that of the lanthanides at their L(III) edge. The resulting exceptional phasing power of uranium is most attractive in protein crystallography using the multi-wavelength anomalous diffraction (MAD) method. The anomalous dispersion of an uranium derivative of asparaginyl-tRNA synthetase (hexagonal unit cell; a = 123.4 A, c = 124.4 A) has been measured for the first time at 4 wavelengths near the M(V) edge using the beamline ID1 of ESRF (Grenoble, France). The present set up allowed to measure only 30% of the possible reflections at a resolution of 4 A, mainly because of the low sensitivity of the CCD detector. In the second experiment, the dispersion of the intensity of 5 X-ray diffraction peaks from pentakismethylammonium undecachlorodibismuthate (PMACB, orthorhombic unit cell; a = 13.003 A, b = 14.038 A, c = 15.450 A) has been measured at 30 wavelengths near the K absorption edge of chlorine (lambdaK = 4.397 A, EK= 2819.6 eV). All reflections within the resolution range from 6.4 A to 3.4 A expected in the 20 degree scan were observed. The chemical state varies between different chlorine atoms of PMACB, and so does the dispersion of different Bragg peaks near the K-edge of chlorine. The results reflect the performance of the beamline ID1 of ESRF at wavelengths beyond 3 A at the end of 1998. A gain by a factor 100 for diffraction experiments with 4.4 A photons was achieved in Autumn 1999 when two focusing mirrors had been added to the X-ray optics. Further progress is expected from area detectors more sensitive to soft X-rays. Both CCD detectors and image plates would provide a gain of two orders of measured intensity. Image plates would have the additional advantage that they can be bent cylindrically and thus cover a larger solid angle in reciprocal space. In many cases, samples need to be cooled: closed and open systems are presented. A comparison with the state of art of soft X-ray diffraction, as it had been reached at HASYLAB (Hamburg, Germany), and as it is developing at the Brookhaven National Laboratory (USA), is given.     

Radiation of nitrogen molecules in a dielectric barrier discharge with small additives of chlorine and bromine

Spectral and energy characteristics of nitrogen molecule radiation in dielectric barrier discharges in Ar-N₂, Ar-N₂-Cl₂, and Ar-N₂-Br₂ mixtures were investigated experimentally. Small additives of molecular chlorine or bromine to an Ar-N₂ mixture are found to increase the radiation intensity of the second positive system of nitrogen. The conditions at which the radiation spectrum predominantly consists of vibronic bands of this system are determined. Using a numerical model of plasmachemical processes, it is shown that, at electron temperatures typical of gas discharges (2–4 eV), a minor additive of molecular chlorine to an Ar-N₂ mixture leads to an increase in the concentrations of electrons, positive ions, and metastable argon atoms. In turn, collisional energy transfer from metastable argon atoms to nitrogen molecules results in the excitation of the N₂(C ³Π _u ) state.     

NMR and NQR parameters of the SiC-doped on the (4,4) <Emphasis Type="Italic">armchair</Emphasis> single-walled BPNT: a computational study

The structural properties, NMR and NQR parameters in the pristine and silicon carbide (SiC) doped boron phosphide nanotubes (BPNTs) were calculated using DFT methods (BLYP, B3LYP/6-31G*) in order to evaluate the influence of SiC-doped on the (4,4) armchair BPNTs. Nuclear magnetic resonance (NMR) parameters including isotropic (CS^I) and anisotropic (CS^A) chemical shielding parameters for the sites of various ¹³C, ²⁹Si, ¹¹B, and ³¹P atoms and quadrupole coupling constant (C _Q ), and asymmetry parameter (η _Q ) at the sites of various ¹¹B nuclei were calculated in pristine and SiC- doped (4,4) armchair boron phosphide nanotubes models. The calculations indicated that doping of ¹¹B and ³¹P atoms by C and Si atoms had a more significant influence on the calculated NMR and NQR parameters than did doping of the B and P atoms by Si and C atoms. In comparison with the pristine model, the SiC- doping in Si_PC_B model of the (4,4) armchair BPNTs reduces the energy gaps of the nanotubes and increases their electrical conductance. The NMR results showed that the B and P atoms which are directly bonded to the C atoms in the SiC-doped BPNTs have significant changes in the NMR parameters with respect to the B and P atoms which are directly bonded to the Si atoms in the SiC-doped BPNTs. The NQR results showed that in BPNTs, the B atoms at the edges of nanotubes play dominant roles in determining the electronic behaviors of BPNTs. Also, the NMR and NQR results detect that the Fig. 1b (Si_PC_B) model is a more reactive material than the pristine and the Fig. 1a (Si_BC_p) models of the (4,4) armchair BPNTs.     

Assimilation of Elemental Sulfur by a Mutant of Escherichia coli B

4-Chloro-2-butynyl N-(3-chlorophenyl)carbamate (Barban) is a herbicide whose alkaline hydrolysis leads quantitatively to 3-chloroaniline, after releasing the chlorine atom from the ester group. The dechlorination step proceeds via a nucleophilic substitution reaction of the type S_n2-S_n2 corresponding to an attack by hydroxide ion at the carbon atoms that are a and y to the chlorine atom. The 4-hydroxy-2-butynyl and 2-oxo-3-butenyl N-(3-chlorophenyl)carbamates thus formed are hydrolysed to the N-(3-chlorophenyl)carbamic acid which, on decarboxylation, gives 3-chloroaniline.     

Stabilization of the cobalt coordination site in transmetalation processes on dinuclear salen derivatives

Two dinuclear cobalt/copper compounds have been isolated from the reaction between N,N′-ethylenebis(salicylideniminato)cobalt(II), [Co(salen)], and copper(II) chloride in different conditions. The first one is a dinuclear cobalt(III)/copper(II) derivative, [Co(salen)Cl₂Cu(EtOH)₂Cl], 1, that have the cobalt atom six-coordinated to the four donor atoms of the salen ligand and to two chlorine atoms in a slightly distorted octahedral environment and the copper atom five-coordinated to the two bridging oxygen atoms of the salen ligand, two ethanol molecules and one extra chlorine atom. This compound is the only reported example of a cobalt/copper derivative with the cobalt maintaining the salen coordinative site, since the usual reaction takes place by a transmetalation process. This reaction is observed in the second derivative, [Cu(salen)CoCl₂], 2, where the copper atom displaces the cobalt from the salen cavity. The copper atom adopts a square-planar coordinative environment, while the cobalt is tetrahedrically coordinated to the two bridging oxygen and two chlorine atoms. Both compounds present several intermolecular contacts that increase the dimensionality in the crystal and some of which can transmit magnetic interactions. The magnetic properties confirm the structural picture, with isolated copper(II) centres in 1, where the cobalt(III) is in the low spin form, and with antiferromagnetically coupled S = ¹/₂ and S = ³/₂ centres in 2.     

Doping‐Free Asymmetrical Silicon Heterocontact Achieved by Integrating Conjugated Molecules for High Efficient Solar Cell

Organic conjugated molecule/silicon (Si) heterojunction has been widely investigated to build up an asymmetrical heterocontact for efficient photovoltaics. However, it is still unclear how the organic molecular structures can affect their electronic coupling interaction with Si. Here, two widely explored electron acceptors of poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)} (N2200) and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) are used to build up asymmetrical Si heterocontact to investigate their electronic coupling interaction. It is found that PCBM displays different electronic coupling with Si from N2200, which is ascribed to their various physical distance with Si based on a systematic and detailed density functional theory calculation. Organic layer incorporation not only suppresses the surface charge recombination velocity but also leads to an Ohmic contact between Si and Al. Therefore, a doping‐free organic/Si heterojunction photovoltaic with a power conversion efficiency of 14.9% is achieved with PCBM layer. This work discloses a key factor affecting organic/Si electronic coupling interaction, which helps build up high quality Si heterocontact for solar cells and other optoelectronic devices. Furthermore, the simplified heterocontact achieved by a low temperature, solution processed, and lithography‐free steps has a dramatic improvement on conventional diffusion doped‐silicon one at high temperature.     

The Role of Organic-matter-bound Chlorine in the Chlorine Cycle: A Case Study of the Stubbetorp Catchment,Sweden

The objective of this study is to construct a balanced chlorine budget for a small forested catchment, focusing on the interaction between chloride (Cl_inorg) and organic-matter-bound chlorine (Cl_org). Data from the actual catchment are combined with secondary data from other sites to elucidate more clearly which parts of the cycle are fairly well known and which are more or less unknown. The budget calculations show that the principal input and output fluxes of Cl in the catchment are inorganic but that the main pool is Cl_org in the soil. In addition, the budget calculations suggest that a considerable portion of Cl_inorg in soil is transformed to Cl_org and subsequently leached to deeper soil layers, that net mineralization of Cl_org takes place in soil, preferably in deeper soil layers, and that degrading organic matter is a major source of Cl_inorg in runoff. The loss of Cl_org through runoff is small to negligible in relation to other fluxes. It appears as if dry deposition of Cl_inorg is at risk of being underestimated if Cl_inorg is assumed to be conservative in soil. The pool of organic-matter-bound chlorine in soil is considerably larger than the annual flux of chloride through the system. The estimates suggest that the amount of Cl_org in the upper 40 cm of the soil at the investigated site is approximately twice as large as the Cl_inorg. Furthermore, the amount of Cl_org biomass is small in relation to the occurrence of Cl_org in soil. Finally, the estimates indicate that the transport of volatile Cl_org from the soil to the atmosphere may influence the chlorine cycle.     

DFT and MD study of adsorption sensitivity of aluminium phosphide nanotube towards some air pollutant gas molecules

To investigate the adsorption behaviour of CS₂, CO₂, SO₂, H₂Se and H₂S gas molecules on the external surface of (6, 0) single-walled aluminium phosphide nanotube (AlPNT), the density functional theory (DFT) calculations at the B3LYP level of theory are performed. The partial densities of states (PDOS) for the SO₂ molecule, the S and O atoms of SO₂ molecule before and after adsorption on the surface of AlPNT have been plotted. The vibrational frequencies and physical properties such as chemical potential, chemical hardness, dipole moment and chemical electrophilicity of all studied complexes have been systematically investigated. The electron density and the Laplacian of the electron density for bond critical points have been examined by the AIM theory. Also the molecular dynamics (MD) simulations of two complexes with the minimum and maximum negative interaction energies that is: AlPNT/CO₂ and AlPNT/SO₂ complexes, respectively, have been considered.