Effect of aprotic solvents on the enzymatic activity of lipase in AOT reverse micelles

The modification of reverse micellar systems composed of AOT, isooctane, water by the addition of aprotic solvents has been performed. The impact of this change on the activity, stability and kinetics of solubilized Chromobacterium viscosum lipase (glycerol-ester hydrolase, EC 3.1.1.3) was investigated. Of seven aprotic solvents tested, dimethyl sulfoxide (DMSO) was found to be most effective. It was found that lipase activity was enhanced by optimizing some relevant parameters, such as water–AOT molar ratio (W₀), buffer pH and surfactant concentration. A kinetic model that considers the free substrate in equilibrium with the substrate adsorbed on the micellar surface was successfully used to deduce some kinetic parameters (V_max, K_m and K_ad), and the values of K_m and K_ad were significantly reduced by the presence of DMSO. Higher lipase stability was found in AOT reverse micelles with DMSO compared with that in simple AOT systems with half-life of 125 and 33 days, respectively. Fluorescence spectroscopy and Fourier transform infrared spectroscopy (FT-IR) were used to elucidate the effects of DMSO on the properties of AOT reverse micelles.     

Lipase-catalyzed esterification of fatty acid in DMSO (dimethyl sulfoxide) modified AOT reverse micellar systems

AOT reverse micellar system was modified with DMSO for improved esterification activity of Chromobacterium viscosum lipase (glycerol-ester hydrolase, EC 3.1.1.3). The enzymatic activity was strongly affected by the concentration of DMSO, and maximum activity was obtained at 30-40 mM. The various relevant physical parameters such as w₀ (molar ratio of water to AOT), pH and reaction temperature that influence the activity of lipase were studied in order to obtain the best value and compared with those in simple AOT reverse micelles. The apparent activation energy decreased in the presence of DMSO. The stability of lipase entrapped in modified AOT systems was excellent, and the half-life was about 3.25 times than that observed in simple AOT systems at 25°C. A simple first-order deactivation model was considered to determine the deactivation rate constant. The thermodynamic stability of lipase in reverse micelles was measured by the Gibbs free energy. A fluorescence study was performed to provide information on structural changes in AOT reverse micelles which was accompanied by the addition of DMSO.     

Characteristics of Lipase-Catalyzed Glycerolysis of Triglyceride in AOT-Isooctane Reversed Micelles

Chromobacterium viscosum lipase, solubilized in microemulsion droplets of glycerol containing small amounts of water and stabilized by a surfactant, could catalyze the glycerolysis of triolein. Kinetic analysis of the lipase-catalyzed reaction was possible in the reversed micellar system. Among surfactants and organic solvents tested, bis(2-ethylhexyl)sodiumsulfosuccinate (AOT) and isooctane were respectively most effective, for the glycerolysis of triolein in reversed micelles. Temperature effects, pH profile, K_m,app, and V_max,app were determined. Among various chemical compounds, Fe³⁺, Cu²⁺, and Hg²⁺ inhibited the lipase-catalyzed glycerolysis severely. However, the glycerolysis activity was partially restorable by adding histidine or glycine to the system containing these metal ions. The glycerolysis activity was dependent on water content and maximum activity was obtained at an R value of 1.21. Higher stability of the lipase was obtained in the reversed micellar system.     

Stability and Enzymatic Studies of Glucose Dehydrogenase from the Archaeon Haloferax mediterranei in reverse micelles

Reverse micelles were used as a cytoplasmic model to study the kinetics of an extreme halophilic enzyme such as the recombinant glucose dehydrogenase from the Archaeon Haloferax mediterranei. This enzyme was solubilized in reverse micelles of hexadecyltrimethylammoniumbromide in cyclohexane, with 1-butanol as co-surfactant. Glucose dehydrogenase retained its catalytic properties in this organic medium, showing good stability at low water content, even at low salt concentration (125 mM NaCl). The dependence of the enzymatic activity on the molar water surfactant ratio (w₀=[H₂O]/[surfactant]) increased with rising water content. Surprisingly, the activity of this extreme halophilic enzyme did not depend on the salt concentration in reverse micelles. The kinetic of the enzymatic oxidation of β-D-glucose to D-glucono-1,5-lactone using NADP⁺ as coenzyme for the glucose dehydrogenase from Haloferax mediterranei was also studied in the reverse micellar system.     

Improvement in extraction and catalytic activity of Mucor javanicus lipase by modification of AOT reverse micelle

Reverse micelles are formed in apolar solvents by spontaneous aggregation of surfactants. Surfactant sodium bis (2-ethylhexyl) sulfosuccinate (AOT) is most often used for the reverse micellar extraction of enzymes. However, the inactivation of enzyme due to strong interaction with AOT molecules is a severe problem. To overcome this problem, the AOT/water/isooctane reverse micellar system was modified by adding short chain polyethylene glycol 400 (PEG 400). The modified AOT reverse micellar system was used to extract Mucor javanicus lipase from the aqueous phase to the reverse micellar phase. The extraction efficiency (E) increased with the increase in PEG 400 addition and the maximum E in PEG 400 modified system was twofold higher than that in the PEG 400-free system. Upon addition of PEG 400, the water activity (a(w)) of aqueous phase decreased, whereas a(w) of reverse micellar phase increased. The circular dichroism spectroscopy analysis revealed that PEG 400 changes the secondary and tertiary structure of lipase. The maximum specific activity of lipase extracted in PEG 400-modified reverse micellar system was threefold higher than that in the PEG-free system.     

Esterification reactions of lipase in reverse micelles

The activities of lipase from Candida cylindracea and Rhizopus delemar have been investigated in water/AOT/iso-octane reverse micellar media through the use of two esterification reactions: fatty acid-alcohol esterification and glyceride synthesis. Such media promotes the occurrence of these two lipase-catalyzed reactions due to its low water content. The effect of various parameters on the activity of lipase from C. cylindracea in reverse micelles was determined and compared to results where alternate media were employed. It was observed that the structure of the media, as dictated by the type and concentration of the substrates and products and by the water/AOT ratio, w(0), had a strong impact on enzyme activity. Strong deactivation of both typase types occurred in reverse micelles, especially in the absence of substrates and for w(0) values greater than 3.0. Glyceride synthesis was realized with lipase from R. delemar, but not with that from C. cylindracea; the temperature and concentration of substrates and water strongly dictated the reaction rate and the percent conversion.     

Lipase catalyzed esterification of glycidol in nonaqueous solvents: solvent effects on enzymatic activity

We studied the effect of organic solvents on the kinetics of porcine pancreatic lipase (pp) for the resolution of racemic glycidol through esterification with butyric acid. We quantified ppl hydration by measuring water sorption isotherms for the enzyme in the solvents/mixtures tested. The determination of initial rates as a function of enzyme hydration revealed that the enzyme exhibits maximum apparent activity in the solvents/mixtures at the same water content (9% to 11% w/w) within the associated experimental error. The maximum initial rates are different in all the media and correlate well with the logarithm of the molar solubility of water in the media, higher initial rates being observed in the solvents/mixtures with lower water solubilities. The data for the mixtures indicate that ppl apparent activity responds to bulk property of the solvent. Measurements of enzyme particle sizes in five of the solvents, as function of enzyme hydration, revealed that mean particle sizes increased with enzyme hydration in all the solvents, differences between solvents being more pronounced at enzyme hydration levels close to 10%. At this hydration level, solvents having a higher water content lead to lower reaction rates; these are the solvents where the mean enzyme particle sizes are greater. Calculation of the observable modulus indicates there are no internal diffusion limitations. The observed correlation between changes in initial rates and changes in external surface area of the enzyme particles suggests that interfacial activation of ppl is only effective at the external surface of the particles. Data obtained for the mixtures indicate that ppl enantioselectivity depends on specific solvent-enzyme interactions. We make reference to ppl hydration and activity in supercritical carbon dioxide. (c) 1994 John Wiley & Sons, Inc.     

Esterification of Short Chain Organic Acids with Alcohols by a Lipase Microencapsulated in Reversed Micelles

A Mucor miehei lipase was used to catalyse the esterification reaction between propionic acid and oleyl alcohol in reversed micelles of AOT in isooctane. Small-scale model studies were performed to study the influence of various parameters on the formation of oleyl propionate by this lipase. The maximum synthetic activity was obtained at w₀ = 4.0. At high temperatures (65°C) the enzyme displays a better stability for a low water content (w₀ = 3.3). The specificity of lipase was influenced by the solubilized water in the reversed micelles.     

Dependence of Lipase Activity on Water Content and Enzyme Concentration in Reverse Micelles

The activity of Candida rugosa lipase (EC 3.1.1.3) in reverse micelles has been measured at various concentrations of water and enzyme with the aim of answering the question, why is the enzyme activity affected by the molar ratio of water to surfactant (w₀ = [H₂O]/[Surfactant])? In the low range of water content (below w₀ ≈ 6), the activity increases with increasing water content, indicating the requirement of a minimum amount of water for the full expression of enzymatic activity. The minimal w₀-value for obtaining maximal activity depends on the enzyme concentration: The higher the enzyme concentration, the higher w_{0, max}. In addition, it was found that, at least for the case of Candida rugosa lipase, the measured dependence of enzyme activity on w₀ does not represent a true chemical equilibrium. Changing the w₀-value during the reaction does not change the activity as expected on the basis of the w₀-activity profile obtained for single w₀ point measurements. All these observations, however, cannot be directly generalized to all enzymes in reverse micelles, due to the peculiarity of lipase. In particular, the enzyme seems to inactivate irreversibly during the solubilization process.     

Higher order structure of Mucor miehei lipase and micelle size in cetyltrimethylammonium bromide reverse micellar system

The higher order structure of Mucor miehei lipase and micelle size in a cationic cetyltrimethylammonium bromide (CTAB) reverse micellar system was investigated. Circular dichroic (CD) measurement revealed that the lipase far-UV CD spectra changed markedly, going from buffer solution to the reverse micellar solution, and were very similar for any organic solvent used. The ellipticity of the solubilized lipase in the far-UV region markedly decreased with increasing water content (W(0): molar ratio of water to CTAB), indicating that the secondary structure of lipase changed with the water content. The linear correlation between the W(0) and the micelle size was obtained by measuring dynamic light scattering. From the linear correlation between the micelle size and W(0), the higher order structure of the solubilized lipase appears to be affected directly by the micellar interface. The species and concentration of alcohol as a cosurfactant had an inferior effect on lipase structure. Especially, at ratios of 1-pentanol to CTAB of less than 8, the secondary and tertiary structures of lipase were preserved in the reverse micelles. The CTAB concentration had little effect on the lipase structure in the micelles. The catalytic activity of the lipase solubilized in the CTAB reverse micelles increased with increasing the W(0).     

Lipase-catalyzed esterification of fatty acid in DMSO (dimethyl sulfoxide) modified AOT reverse micellar systems

AOT reverse micellar system was modified with DMSO for improved esterification activity of Chromobacteriumviscosum lipase (glycerol–ester hydrolase, EC 3.1.1.3). The enzymatic activity was strongly affected by the concentration of DMSO, and maximum activity was obtained at 30–40 mM. The various relevant physical parameters such as w₀ (molar ratio of water to AOT), pH and reaction temperature that influence the activity of lipase were studied in order to obtain the best value and compared with those in simple AOT reverse micelles. The apparent activation energy decreased in the presence of DMSO. The stability of lipase entrapped in modified AOT systems was excellent, and the half-life was about 3.25 times than that observed in simple AOT systems at 25°C. A simple first-order deactivation model was considered to determine the deactivation rate constant. The thermodynamic stability of lipase in reverse micelles was measured by the Gibbs free energy. A fluorescence study was performed to provide information on structural changes in AOT reverse micelles which was accompanied by the addition of DMSO.     

Kinetics of <Emphasis Type="Italic">p</Emphasis>-nitrophenyl Acetate Hydrolysis Catalyzed by <Emphasis Type="Italic">Mucor javanicus</Emphasis> Lipase in AOT Reverse Micellar Solutions Formulated in Different Organic Solvents

The rate of hydrolysis of p-nitrophenyl acetate (PNPA) catalyzed by Mucor javanicus lipase has been measured in AOT reverse micellar solutions formulated in aliphatic hydrocarbons, aromatic hydrocarbons and a chlorinated compound. The study has been performed at a single value of W = ([water]/[AOT]) = 6.0. Fluorescence decay measurements of intrinsic enzyme fluorescence, mainly due to tryptophan residues, in the different reverse micellar systems were also carried out, in an attempt to obtain some insight on the effect of the organic solvent on the protein conformation. Differences observed in the kinetics of the fluorescence decays of tryptophan residues of the lipase incorporated to the micelles with the different external organic solvents were also found in the catalytic behaviour of the enzyme. In particular, it is observed that the contribution of the long lived component of the fluorescence decay is considerably higher (ca. 40%) in aliphatic than in aromatic solvents (ca. 15%), indicating significant differences in the protein conformation. This effect of the organic solvent on the protein conformation is also observed in the enzymatic activity, which is higher in the aromatic than in the aliphatic solvents.     

Kinetics and stability of delta 5-3-ketosteroid isomerase from Pseudomonas testosteroni in the system of reverse micelles of aerosol OT in isooctane.

Partially purified delta 5-3-ketosteroid isomerase (KSI) from Pseudomonas testosteroni was studied kinetically after solubilization in reverse micelles of aerosol OT (AOT) in isooctane and water, as regards its application to biotechnology. With delta 5,10-estren-17 beta-ol-3-one as a substrate, KSI displays an enzyme activity in the micellar system but a low stability. In the presence of urea, the enzyme is, however, stable. Kinetic parameters of the stabilized enzyme are highly sensitive to both the hydration degree of the surfactant and its concentration. The hypothesis of the geometric correspondence of a non-spherical enzyme and spherical micellar matrix is considered.     

Influence of Igepal reverse micellar and micellar systems on activity and stability of heme peroxidases

The activities of horseradish peroxidase (HRP) and lactoperoxidase (LPO) entrapped in reverse micelles of Igepal CO-520 in cyclohexane were studied. When the molar ratio of water to surfactant, w ₀ was ≥13, the activity of HRP encapsulated in the water pool of the reverse micelle was comparable with that measured in buffer. For LPO, however, lower activity was observed after its incorporation into the same system.

The activity of the investigated peroxidases was also measured in an aqueous solution of Igepal CO-720 or after incubation with this surfactant. The enzymes became inactivated in an aqueous micellar solution of Igepal CO-720, although this process was reversible.

The stability of HRP and LPO at 37 or 50°C was lower in the micellar systems than in buffer with the exception for HRP in reverse micelles at 50°C.     

Characteristics of Lipase-Catalyzed Glycerolysis of Triglyceride in AOT-Isooctane Reversed Micelles

Chromobacterium viscosum lipase, solubilized in microemulsion droplets of glycerol containing small amounts of water and stabilized by a surfactant, could catalyze the glycerolysis of triolein. Kinetic analysis of the lipase-catalyzed reaction was possible in the reversed micellar system. Among surfactants and organic solvents tested, bis(2-ethylhexyl)sodiumsulfosuccinate (AOT) and isooctane were respectively most effective, for the glycerolysis of triolein in reversed micelles. Temperature effects, pH profile, K_m,app, and V_max,app were determined. Among various chemical compounds, Fe³⁺, Cu²⁺, and Hg²⁺ inhibited the lipase-catalyzed glycerolysis severely. However, the glycerolysis activity was partially restorable by adding histidine or glycine to the system containing these metal ions. The glycerolysis activity was dependent on water content and maximum activity was obtained at an R value of 1.21. Higher stability of the lipase was obtained in the reversed micellar system.     

Lipase-Catalyzed Reactions in Reverse Micelles Formed by Soybean Lecithin

Reverse micelles formed by soybean lecithin in isooctane were used as a reaction medium for both the lipase-catalyzed hydrolysis as well as the synthesis of lipids. Neither reaction appears to follow Michaelis-Menten kinetics and it is suggested that the rates are diffusion controlled. The hydrolysis of para-nitrophenylpalmitate (PNPP) and, in particular, the pH-dependency of the lipase-catalyzed hydrolysis was then examined. The highest rate of reaction occurred at pH_opt = 5–5.5, which was the same in water and lecithin reverse micelles, as well as in reverse micelles formed by bis(2-ethylhexyl)-sulfosuccinate (AOT) in isooctane. The dependence of the reaction rate on the water content of the micellar system was investigated for the same reaction. The maximal rate was found at an extremely low water content, i.e. at W_o = 2.2 (W_o = [H₂O]/[Lecithin]). The temperature stability of the lipase in lecithin reverse micelles was also studied and found to be greater than in aqueous solutions. Studies of the dependence of the relative initial velocity on temperature have shown that the highest rate in reverse micelles is obtained at 60d`C.     

Hydration and protein folding in water and in reverse micelles: compressibility and volume changes

The partial specific volume and adiabatic compressibility of proteins reflect the hydration properties of the solvent-exposed protein surface, as well as changes in conformational states. Reverse micelles, or water-in-oil microemulsions, are protein-sized, optically-clear microassemblies in which hydration can be experimentally controlled. We explore, by densimetry and ultrasound velocimetry, three basic proteins: cytochrome c, lysozyme, and myelin basic protein in reverse micelles made of sodium bis (2-ethylhexyl) sulfosuccinate, water, and isooctane and in aqueous solvents. For comparison, we use beta-lactoglobulin (pI = 5.1) as a reference protein. We examine the partial specific volume and adiabatic compressibility of the proteins at increasing levels of micellar hydration. For the lowest water content compatible with complete solubilization, all proteins display their highest compressibility values, independent of their amino acid sequence and charge. These values lie within the range of empirical intrinsic protein compressibility estimates. In addition, we obtain volumetric data for the transition of myelin basic protein from its initially unfolded state in water free of denaturants, to a folded, compact conformation within the water-controlled microenvironment of reverse micelles. These results disclose yet another aspect of the protein structural properties observed in membrane-mimetic molecular assemblies.     

Dynamics of a membrane-bound tryptophan analog in environments of varying hydration: a fluorescence approach

Tryptophan octyl ester (TOE) represents an important model for membrane-bound tryptophan residues. In this article, we have employed a combination of wavelength-selective fluorescence and time-resolved fluorescence spectroscopies to monitor the effect of varying degrees of hydration on the dynamics of TOE in reverse micellar environments formed by sodium bis(2-ethylhexyl) sulfosuccinate (AOT) in isooctane. Our results show that TOE exhibits red edge excitation shift (REES) and other wavelength-selective fluorescence effects when bound to reverse micelles of AOT. Fluorescence parameters such as intensity, emission maximum, anisotropy, and lifetime of TOE in reverse micelles of AOT depend on [water]/[surfactant] molar ratio (w (o)). These results are relevant and potentially useful for analyzing dynamics of proteins or peptides bound to membranes or membrane-mimetic media under conditions of changing hydration.     

Characterization of lipase in reversed micelles formulated with cibacron blue F-3GA modified span 85

Sorbitan trioleate (Span 85) modified by Cibacron Blue F-3GA (CB) was prepared and used as an affinity surfactant to formulate a reversed micellar system for Candida rugosa lipase (CRL) solubilization. The system was characterized and evaluated by employing CRL-catalyzed hydrolysis of olive oil as a model reaction. The micellar hydrodynamic radius results reflected, to some extent, the redistribution of surfactant and water after enzyme addition, and the correlation between surfactant formulation, water content (W0), micellar size, and enzyme activity. An adequate modification density of CB was found to be important for the reversed micelles to retain enough hydration capacity and achieve high enzyme activity. Compared with the results in AOT-based reversed micelles, CRL in this micellar system exhibited a different activity behavior versus W0. The optimal pH and temperature of the encapsulated lipase remained unchanged, but the apparent activity was significantly higher than that of the native enzyme in bulk solution. Kinetic studies indicated that the encapsulated lipase in the reversed micelles of CB-formulated Span 85 followed the Michaelis-Menten equation. The Michaelis constant was found to decrease with increasing surfactant concentration, suggesting an increase of the enzyme affinity for the substrate. Stability of the lipase in the reversed micelles was negatively correlated to W0.     

Regulation and Prediction of Enzyme Activity in Reversed Micelles

The rate of cholesterol oxidation has been studied in cholesterol oxidase containing reversed micellar media consisting of the surfactant cetyltrimethylammonium bromide (CTAB), the surfactant octanol, a buffered aqueous solution, and a variety of organic solvents. By varying the composition of the medium systematically it could be deduced that the rate of cholesterol oxidation obeys the same rules as described earlier for the conversion of apolar steroids by 20β-hydroxysteroid dehydrogenase in CTAB-hexanol-organic solvent reversed micelles (Hilhorst et al. 1984). The general applicability of these rules in optimizing biocatalysis in reversed micelles is discussed.