Thirty-three amino acids of the mature moiety of an unprocessed maltose-binding protein are sufficient for export in Escherichia coli.

Maltose-binding protein (MBP) is translocated across the cytoplasmic membrane of Escherichia coli; successful export depends on information in both the signal peptide and the mature moiety of the protein. To determine the shortest portion of the mature region that would maintain detectable entry of MBP into the export pathway, we took advantage of the properties of an MBP species with proline substituted in the +1 position relative to the cleavage site (MBP27-P). This protein efficiently crosses the cytoplasmic membrane but is not processed and acts as a competitive inhibitor of signal peptidase I (leader peptidase). Export of MBP27-P is measured by the inhibition of processing of other proteins, such as ribose-binding protein (RBP). A series of truncated derivatives of MBP27-P were tested for the ability to inhibit processing of RBP. An MBP27-P species with only 33 amino acids of the mature moiety inhibited processing of RBP, indicating that this truncated polypeptide was probably exported and interacted with signal peptidase I.     

Export of the periplasmic maltose-binding protein ofEscherichia coli

The export of the maltose-binding protein (MBP), themalE gene product, to the periplasm ofEschericha coli cells has been extensively investigated. The isolation of strains synthesizing MalE-LacZ hybrid proteins led to a novel genetic selection for mutants that accumulate export-defective precursor MBP (preMBP) in the cytoplasm. The export defects were subsequently shown to result from alterations in the MBP signal peptide. Analysis of these and a variety of mutants obtained in other ways has provided considerable insight into the requirements for an optimally functional MBP signal peptide. This structure has been shown to have multiple roles in the export process, including promoting entry of preMBP into the export pathway and initiating MBP translocation across the cytoplasmic membrane. The latter has been shown to be a late event relative to synthesis and can occur entirely posttranslationally, even many minutes after the completion of synthesis. Translocation requires that the MBP polypeptide exist in an export-competent conformation that most likely represents an unfolded state that is not inhibitory to membrane transit. The signal peptide contributes to the export competence of preMBP by slowing the rate at which the attached mature moiety folds. In addition, preMBP folding is thought to be further retarded by the binding of a cytoplasmic protein, SecB, to the mature moiety of nascent preMBP. In cells lacking this antifolding factor, MBP export represents a race between delivery of newly synthesized, export-competent preMBP to the translocation machinery in the cytoplasmic membrane and folding of preMBP into an export-incompetent conformation. SecB is one of threeE. coli proteins classified as molecular chaperones by their ability to stabilize precursor proteins for membrane translocation.     

Use of gene fusion to study secretion of maltose-binding protein into Escherichia coli periplasm.

We have employed the technique of gene fusion to fuse the LacZ gene encoding the cytoplasmic enzyme beta-galactosidase with the malE gene encoding the periplasmic maltose binding protein (MBP). Strains were obtained which synthesize malE-lacZ hybrid proteins of various sizes. These proteins have, at their amino terminus, a portion of the MBP and at their carboxyl terminus, enzymatically active beta-galactosidase. When the hybrid protein includes only a small, amino-terminal portion of the MBP, the hybrid protein residues in the cytoplasm. When the hybrid protein contains enough of the MBP to include an intact MBP signal sequence, a significant portion of the hybrid protein is found in the cytoplasmic membrane, suggesting that secretion of the hybrid protein has been initiated. However, in no case is the hybrid protein secreted into the periplasm, even when the hybrid protein includes almost the entire MBP. In the latter case, the synthesis and attempted export of the hybrid protein interferes with the export of at least certain normal envelope proteins, which accumulate in the cell in their precursor forms, and the cell dies. These results suggest that a number of envelope proteins may be exported at a common site, and that there are only a limited number of such sites. Also, these results indicate that it is not sufficient to simply attach an amino-terminal signal sequence to a polypeptide to assure its export.     

Insertion of a signal peptide-derived hydrophobic segment into the mature domain of OmpC, an outer membrane protein, does not interfere with the export of the following polypeptide chain across the cytoplasmic membrane of E. coli

The effects of a hydrophobic peptide segment inserted into the amino-terminal region of the mature domain of OmpC, an outer membrane protein, on its translocation across the cytoplasmic membrane was studied. Both the intact OmpC and central domain-deleted OmpC were examined. The hydrophobic segment was derived from the signal peptide of OmpF. Secretory translocation across the cytoplasmic membrane was examined by means of proteinase K treatment. Four monoclonal antibodies that recognize different regions of OmpC were used to characterize proteinase K-resistant fragments. Insertion of the hydrophobic segment did not appreciably prevent the translocation of these proteins across the cytoplasmic membrane, larger parts of them being found as mature forms, which were mostly localized outside the cytoplasmic membrane. Circumstantial evidence supports the view, on the other hand, that the inserted hydrophobic domain was retained in the cytoplasmic membrane. It is concluded, therefore, that the hydrophobic segment, although it is not exported across the cytoplasmic membrane, does not prevent the secretion of the following polypeptide chain. The secretion was dependent on the amino-terminal signal peptide. Insertion of positive charges immediately after the hydrophobic segment resulted in suppression of the translocation. Based on these results possible mechanisms by which the secretion of the polypeptide chain after the hydrophobic segment are discussed.     

Synthesis of precursor maltose-binding protein with proline in the +1 position of the cleavage site interferes with the activity of Escherichia coli signal peptidase I in vivo.

The residues occupying the -3 and -1 positions relative to the cleavage site of secretory precursor proteins are usually amino acids with small, neutral side chains that are thought to constitute the recognition site for the processing enzyme, signal peptidase. No restrictions have been established for residues positioned +1 to the cleavage site, although there have been several indications that mutant precursor proteins with a proline at +1 cannot be processed by Escherichia coli signal peptidase I (also called leader peptidase). A maltose-binding protein (MBP) species with proline at +1, designated MBP27-P, was translocated efficiently but not processed when expressed in E. coli cells. Unexpectedly, induced expression of MBP27-P was found to have an adverse effect on the processing kinetics of five different nonlipoprotein precursors analyzed, but not precursor Lpp (the major outer membrane lipoprotein) processed by a different enzyme, signal peptidase II. Cell growth also was inhibited following induction of MBP27-P synthesis. Substitutions in the MBP27-P signal peptide that blocked MBP translocation across the cytoplasmic membrane and, hence, access to the processing enzyme or that altered the signal peptidase I recognition site at position -1 restored both normal growth and processing of other precursors. Since overproduction of signal peptidase I also restored normal growth and processing to cells expressing unaltered MBP27-P, it was concluded that precursor MBP27-P interferes with the activity of the processing enzyme, probably by competing as a noncleavable substrate for the enzyme's active site. Thus, although signal peptidase I, like many other proteases, is unable to cleave an X-Pro bond, a proline at +1 does not prevent the enzyme from recognizing the normal processing site. When the RBP signal peptide was substituted for the MBP signal peptide of MBP27-P, the resultant hybrid protein was processed somewhat inefficiently at an alternate cleavage site and elicited a much reduced effect on cell growth and signal peptidase I activity. Although the MBP signal peptide also has an alternate cleavage site, the different properties of the RBP and MBP signal peptides with regard to the substitution of proline at +1 may be related to their respective secondary structures in the processing site region.     

Export incompatibility of N-terminal basic residues in a mature polypeptide of Escherichia coli can be alleviated by optimising the signal peptide

Summary Export of the outer membrane protein, OmpA, across the cytoplasmic membrane of Escherichia coli was severely inhibited by the presence of two, three, four or six additional basic residues at the N-terminus of the mature polypeptide, but not by three similarily positioned acidic residues. Because a few bacterial proteins do possess basic residues close to the leader peptidase cleavage site and because the type of inhibition described here could pose problems in the construction of hybrid secretory proteins, we also studied means of alleviating this form of export incompatibility. Inhibition was abolished when basic residues were preceded by acidic ones. Also, the processing rates of the mutants with two or six basic residues could be partially restored by increasing the length of the hydrophobic core of the signal peptide. Taking this as a precedent, it is suggested that the structure of the signal peptide is an important feature for maintenance of a reasonable rate of translocation of those exported proteins which possess basic residue(s) at the N-terminus of the mature polypeptide.     

Nine amino acid residues at the NH2-terminal of lipoprotein are sufficient for its modification, processing, and localization in the outer membrane of Escherichia coli

We have examined the structural requirements at the NH2-terminal region of the lipoprotein for its assembly in the outer membrane of Escherichia coli by constructing a hybrid protein consisting of an NH2-terminal portion of the prolipoprotein, consisting of the signal peptide and 9 amino acid residues of lipoprotein, and the entire beta-lactamase sequence. The results from this study indicate that the hybrid protein is modified with glyceride, processed in a globomycin-sensitive step, and localized in the outer membrane. The translocation of the hybrid protein across the cytoplasmic membrane occurs post-translationally and is inhibited by carbonyl cyanide m-chlorophenylhydrazone. Our results, therefore, indicate that the signal peptide and 9 amino acid residues of prolipoprotein are sufficient for its modification, processing, and localization in the outer membrane.     

Export of maltose-binding protein species with altered charge distribution surrounding the signal peptide hydrophobic core in Escherichia coli cells harboring prl suppressor mutations.

It is believed that one or more basic residues at the extreme amino terminus of precursor proteins and the lack of a net positive charge immediately following the signal peptide act as topological determinants that promote the insertion of the signal peptide hydrophobic core into the cytoplasmic membrane of Escherichia coli cells with the correct orientation required to initiate the protein export process. The export efficiency of precursor maltose-binding protein (pre-MBP) was found to decrease progressively as the net charge in the early mature region was increased systematically from 0 to +4. This inhibitory effect could be further exacerbated by reducing the net charge in the signal peptide to below 0. One such MBP species, designated MBP-3/+3 and having a net charge of -3 in the signal peptide and +3 in the early mature region, was totally export defective. Revertants in which MBP-3/+3 export was restored were found to harbor mutations in the prlA (secY) gene, encoding a key component of the E. coli protein export machinery. One such mutation, prlA666, was extensively characterized and shown to be a particularly strong suppressor of a variety of MBP export defects. Export of MBP-3/+3 and other MBP species with charge alterations in the early mature region also was substantially improved in E. coli cells harboring certain other prlA mutations originally selected as extragenic suppressors of signal sequence mutations altering the hydrophobic core of the LamB or MBP signal peptide. In addition, the enzymatic activity of alkaline phosphatase (PhoA) fused to a predicted cytoplasmic domain of an integral membrane protein (UhpT) increased significantly in cells harboring prlA666. These results suggest a role for PrlA/SecY in determining the orientation of signal peptides and possibly other membrane-spanning protein domains in the cytoplasmic membrane.     

The twin-arginine signal peptide of PhoD and the TatAd/Cd proteins of Bacillus subtilis form an autonomous Tat translocation system.

The bacterial twin-arginine translocation (Tat) pathway has been recently described for PhoD of Bacillus subtilis, a phosphodiesterase containing a twin-arginine signal peptide. The expression of phoD is co-regulated with the expression of tatA(d) and tatC(d) genes localized downstream of phoD. To characterize the specificity of PhoD transport further, translocation of PhoD was investigated in Escherichia coli. By using gene fusions, we analyzed the particular role of the signal peptide and the mature region of PhoD in canalizing the transport route. A hybrid protein consisting of the signal peptide of beta-lactamase and mature PhoD was transported in a Sec-dependent manner indicating that the mature part of PhoD does not contain information canalizing the selected translocation route. Pre-PhoD, as well as a fusion protein consisting of the signal peptide of PhoD (SP(PhoD)) and beta-galactosidase (LacZ), remained cytosolic in the E. coli. Thus, SP(PhoD) is not recognized by E. coli transport systems. Co-expression of B. subtilis tatA(d)/C(d) genes resulted in the processing of SP(PhoD)-LacZ and periplasmic localization of LacZ illustrating a close substrate specificity of the TatA(d)/C(d) transport system. While blockage of the Sec-dependent transport did not affect the localization of SP(PhoD)-LacZ, translocation and processing was dependent on the pH gradient of the cytosolic membrane. Thus, the minimal requirement of a functional Tat-dependent protein translocation system consists of a twin-arginine signal peptide-containing Tat substrate, its specific TatA/C proteins, and the pH gradient across the cytosolic membrane.     

Export of unprocessed precursor maltose-binding protein to the periplasm of Escherichia coli cells.

The Escherichia coli maltose-binding protein (MBP) R2 signal peptide is a truncated version of the wild-type structure that still facilitates very efficient export of MBP to the periplasm. Among single amino acid substitutions in the R2 signal peptide resulting in an export-defective precursor MBP (pMBP) were two that replaced residues in the consensus Ala-X-Ala sequence (residues -3 to -1) that immediately precedes the cleavage site. It was suggested that the functional hydrophobic core and signal peptidase recognition sequence of this signal peptide substantially overlap and that these two alterations affect both pMBP translocation and processing. In this study, the export of pMBP by the mutants, designated CC15 and CC17, with these two alterations was investigated further. The pMBP of mutant CC17 has an Arg substituted for Leu at the -2 position. It was found that CC17 cells exported only a very small amount of MBP, but that which was exported appeared to be correctly processed. This result was consistent with other studies that have concluded that virtually any amino acid can occupy the -2 position. For mutant CC15, which exhibits a fully Mal+ phenotype, an Asp is substituted for the Ala at the -3 position. CC15 cells were found to export large quantities of unprocessed, soluble pMBP to the periplasm, although such export was achieved in a relatively slow, posttranslational manner. This result was also consistent with other studies that suggested that charged residues are normally excluded from the -3 position of the cleavage site. Using in vitro oligonucleotide-directed mutagenesis, we constructed a new signal sequence mutant in which Asp was substituted for Arg at the -3 position of an otherwise wild-type MBP signal peptide. This alteration had no apparent effect on pMBP translocation across the cytoplasmic membrane, but processing by signal peptidase was inhibited. This pMBP species with its full-length hydrophobic core remained anchored to the membrane, where it could still participate in maltose uptake. The implications of these results for models of protein export are discussed.     

Introduction of basic amino acid residues after the signal peptide inhibits protein translocation across the cytoplasmic membrane of Escherichia coli. Relation to the orientation of membrane proteins

The introduction of positive charges at the amino terminus of the mature domain of secretory proteins resulted in strong inhibition of their translocation across the cytoplasmic membrane of Escherichia coli, both in vitro and in vivo. The model secretory proteins used were OmpF-Lpp chimeric proteins possessing a cleavable or uncleavable signal peptide, beta-lactamase (Bla) and Bla-Lpp chimeric proteins. It is suggested that positively charged residues preceding the hydrophobic domain of the signal peptide have a positive effect, and ones following the hydrophobic domain, a negative effect on the translocation. These findings are discussed in relation to the orientation of membrane proteins, of which positive charges are predominant on the cytoplasmic surface.     

Protein localization in Escherichia coli K-12: an analysis of ompC-lacZ gene fusions

Abstract Two conditionally expressed lacZU131 gene fusions were constructed in vivo to the ompC gene which encodes a major outer membrane protein in Escherichia coli . The resulting hybrid molecules contained approximately 25% and 50% of the mature OmpC protein fused to the LacZ. Export analysis showed that under nonoverproducing conditions essentially all synthesized OmpC-LacZ hybrid protein was effectively processed in vivo unless the signal peptide cleavage was inhibited by ethanol addition. Also, the hybrid proteins were highly accessible to solid phase iodination of whole cells under conditions where cytoplasmic proteins remained unlabelled. Thus, hybrids containing large portions of the OmpC protein were clearly recognized by the cellular export machinery, and probably all synthesized hybrid protein was partially translocated through the cytoplasmic membrane.     

An inner membrane protein N-terminal signal sequence is able to promote efficient localisation of an outer membrane protein in Escherichia coli

To test the importance of N-terminal pre-sequences in translocation of different classes of membrane proteins, we exchanged the normal signal sequence of an Escherichia coli outer membrane protein, OmpF, for the pre-sequence of the inner membrane protein, DacA. The DacA-OmpF hybrid was efficiently assembled into the outer membrane in a functionally active form. Thus the pre-sequence of DacA, despite its relatively low hydrophobicity compared with that of OmpF, contains all the essential information necessary to initiate the translocation of OmpF to the outer membrane. Since processing of DacA was also shown to be dependent upon SecA we conclude that the initiation of translocation of this inner membrane polypeptide across the envelope occurs by the same mechanism as outer membrane and periplasmic proteins. The N-terminal 11 amino acids of mature OmpF, which in the hybrid are replaced by the N-terminal nine amino acids of DacA, carry no essential assembly signals since the hybrid protein is apparently assembled with equal efficiency to OmpF.     

Role of the mature protein sequence of maltose-binding protein in its secretion across the E. coli cytoplasmic membrane

Secretion of amber fragments of an E. coli periplasmic protein, the maltose-binding protein, was studied to determine if the mature portion of the protein is required for its export across the cytoplasmic membrane. A fragment lacking 25–35 amino acid residues at the C terminus is secreted at normal levels, suggesting that this sequence is not required for secretion. This is in contrast to the results obtained with the periplasmic protein β-lactamase. In studying another fragment of one-third the molecular weight of the intact protein, we found that the majority of the fragment is not recovered from the periplasmic fraction. However, a small amount of secretion of this polypeptide was observed. This fragment is synthesized as a larger molecular weight form when cells are induced for the synthesis of a maltose-binding protein-β-galactosidase hybrid protein, which was previously shown to block the proper localization and processing of envelope proteins. This result is consistent with the idea that the larger form is a precursor with an unprocessed signal sequence, whereas in the absence of the hybrid protein the fragment is a processed mature form. Thus secretion of the smaller fragment may be occurring up to the point where the signal sequence is removed. That this fragment has passed through the cytoplasmic membrane is further supported by its accessibility to externally added trypsin. We suggest that the fragment may be secreted to the periplasm, but cannot assume a water-soluble conformation; the majority of the polypeptide may be associated with the external surface of the cytoplasmic membrane. Thus the mature sequence of maltose-binding protein, at least its C-terminal two thirds, may not be required for its export across the cytoplasmic membrane.     

Prerequisites for terminal processing of thylakoidal Tat substrates

In bacteria and chloroplasts, the Tat (twin arginine translocation) system is capable of translocating folded passenger proteins across the cytoplasmic and thylakoidal membranes, respectively. Transport depends on signal peptides that are characterized by a twin pair of arginine residues. The signal peptides are generally removed after transport by specific processing peptidases, namely the leader peptidase and the thylakoidal processing peptidase. To gain insight into the prerequisites for such signal peptide removal, we mutagenized the vicinity of thylakoidal processing peptidase cleavage sites in several thylakoidal Tat substrates. Analysis of these mutants in thylakoid transport experiments showed that the amino acid composition of both the C-terminal segment of the signal peptide and the N-terminal part of the mature protein plays an important role in the maturation process. Efficient removal of the signal peptide requires the presence of charged or polar residues within at least one of those regions, whereas increased hydrophobicity impairs the process. The relative extent of this effect varies to some degree depending on the nature of the precursor protein. Unprocessed transport intermediates with fully translocated passenger proteins are found in membrane complexes of high molecular mass, which presumably represent Tat complexes, as well as free in the lipid bilayer. This seems to indicate that the Tat substrates can be laterally released from the complexes prior to processing and that membrane transport and terminal processing of Tat substrates are independent processes.     

Maturation of Escherichia coli maltose-binding protein by signal peptidase I in vivo. Sequence requirements for efficient processing and demonstration of an alternate cleavage site

Comparative analyses of a number of secretory proteins processed by eukaryotic and prokaryotic signal peptidases have identified a strongly conserved feature regarding the residues positioned -3 and -1 relative to the cleavage site. These 2 residues of the signal peptide are thought to constitute a recognition site for the processing enzyme and are usually amino acids with small, neutral side chains. It was shown previously that the substitution of aspartic acid for alanine at -3 of the Escherichia coli maltose-binding protein (MBP) signal peptide blocked maturation by signal peptidase I but had no noticeable effect or MBP translocation across the cytoplasmic membrane of its biological activity. This identified an excellent system in which to undertake a detailed investigation of the structural requirements and limitations for the cleavage site. In vitro mutagenesis was used to generate 14 different amino acid substitutions at -3 and 13 different amino acid substitutions at -1 of the MBP signal peptide. The maturation of the mutant precursor species expressed in vivo was examined. Overall, the results obtained agreed fairly well with statistically derived models of signal peptidase I specificity, except that cysteine was found to permit efficient processing when present at either -3 and -1, and threonine at -1 resulted in inefficient processing. Interestingly, it was found that substitutions at -1 which blocked processing at the normal cleavage site redirected processing, with varying efficiencies, to an alternate site in the signal peptide represented by the Ala-X-Ala sequence at positions -5 to -3. The substitution of aspartic acid for alanine at -5 blocked processing at this alternate site but not the normal site. The amino acids occupying the -5 and -3 positions in many other prokaryotic signal peptides also have the potential for constituting alternate processing sites. This appears to represent another example of redundant information contained within the signal peptide.     

SecB-independent export of Escherichia coli ribose-binding protein (RBP): some comparisons with export of maltose-binding protein (MBP) and studies with RBP-MBP hybrid proteins.

The efficient export of the Escherichia coli maltose-binding protein (MBP) is known to be SecB dependent, whereas ribose-binding protein (RBP) export is SecB independent. When the MBP and RBP signal peptides were exchanged precisely at the signal peptidase processing sites, the resultant RBP-MBP and MBP-RBP hybrid proteins both were efficiently exported in SecB+ cells. However, only MBP-RBP was efficiently exported in SecB- cells; RBP-MBP exhibited a significant export defect, a finding that was consistent with previous proposals that SecB specifically interacts with the mature moiety of precursor MBP to promote export. The relatively slow, totally posttranslational export mode exhibited by certain mutant RBP and MBP-RBP species in SecB+ cells was not affected by the loss of SecB. In contrast, MBP and RBP-MBP species with similarly altered signal peptides were totally export defective in SecB- cells. Both export-defective MBP and RBP-MBP interfered with SecB-mediated protein export by depleting cells of functional SecB. In contrast, neither export-defective RBP nor MBP-RBP elicited such an interference effect. These and other data indicated that SecB is unable to interact with precursor RBP or that any interaction between these two proteins is considerably weaker than that of SecB with precursor MBP. In addition, no correlation could be established between a SecB requirement for export and PrlA-mediated suppression of signal peptide export defects. Finally, previous studies have established that wild-type MBP export can be accomplished cotranslationally, whereas wild-type RBP export is strictly a posttranslational process. In this study, cotranslational export was not detected for either MBP-RBP or RBP-MBP. This indicates that the export mode exhibited by a given precursor protein (cotranslational versus posttranslational) is determined by properties of both the signal peptide and the mature moiety.     

Defective Escherichia coli signal peptides function in yeast

To investigate structural characteristics important for eukaryotic signal peptide function in vivo, a hybrid gene with interchangeable signal peptides was cloned into yeast. The hybrid gene encoded nine residues from the amino terminus of the major Escherichia coli lipoprotein, attached to the amino terminus of the entire mature E. coli beta-lactamase sequence. To this sequence were attached sequences encoding the nonmutant E. coli lipoprotein signal peptide, or lipoprotein signal peptide mutants lacking an amino-terminal cationic charge, with shortened hydrophobic core, with altered potential helicity, or with an altered signal-peptide cleavage site. These signal-peptide mutants exhibited altered processing and secretion in E. coli. Using the GAL10 promoter, production of all hybrid proteins was induced to constitute 4-5% of the total yeast protein. Hybrid proteins with mutant signal peptides that show altered processing and secretion in E. coli, were processed and translocated to a similar degree as the non-mutant hybrid protein in yeast (approximately 36% of the total hybrid protein). Both non-mutant and mutant signal peptides appeared to be removed at the same unique site between cysteine 21 and serine 22, one residue from the E. coli signal peptidase II processing site. The mature lipo-beta-lactamase was translocated across the cytoplasmic membrane into the yeast periplasm. Thus the protein secretion apparatus in yeast recognizes the lipoprotein signal sequence in vivo but displays a specificity towards altered signal sequences which differs from that of E. coli.     

The stable BRP signal peptide causes lethality but is unable to provoke the translocation of cloacin DF13 across the cytoplasmic membrane of Escherichia coli

The bacteriocin release protein (BRP) mediates the secretion of cloacin DF13. The BRP precursor is slowly processed to yield the mature BRP and its stable signal peptide which is also involved in cloacin DF13 secretion. The function of the stable BRP signal peptide was analysed by constructing two plasmids. First, the stable BRP signal peptide was fused to the murein lipoprotein and, second, a stop codon was introduced after the BRP signal sequence. Exchange of the unstable murein lipoprotein signal peptide for the stable BRP signal peptide resulted in an accumulation of precursors of the hybrid murein lipoprotein. This indicated that the BRP signal peptide, as part of this hybrid precursor, is responsible for the slow processing. The stable BRP signal peptide itself was not able to direct the transfer of cloacin DF13 into the periplasmic space or into the culture medium. Over-expression of the BRP signal peptide was lethal and caused 'lysis'. Subcellular fractionation experiments revealed that the BRP signal peptide is located exclusively in the cytoplasmic membrane whereas the mature BRP, targeted by either the stable BRP signal peptide or the unstable Lpp signal peptide, is located in both the cytoplasmic and outer membrane. These results are in agreement with the hypothesis that the stable signal peptide and the mature BRP together are required for the passage of cloacin DF13 across the cell envelope.     

In vitro translocation of secretory proteins possessing no charges at the mature domain takes place efficiently in a protonmotive force-dependent manner.

The effect of charges existing on the mature domain of secretory proteins on the efficiency and protonmotive force dependence of translocation into everted membrane vesicles of Escherichia coli was studied. Model secretory proteins devoid of charges on the mature domain were constructed at the DNA level using proOmpF-Lpp as the starting protein. The chargeless presecretory proteins thus constructed were translocated and processed for the signal peptide much faster than proOmpF-Lpp and the rate of translocation was appreciably enhanced by imposition of the protonmotive force. Not only the membrane potential but also delta pH were effective in stimulating the rate of translocation of the chargeless proteins. The results indicate that the mature domain does not have to be charged for the secretory translocation and that the major requirement of the protonmotive force for the secretory translocation is not for the movement, including an electrophoretic one, of charged regions of the mature domain. All of the proOmpF-Lpp derivatives thus constructed were translocated efficiently into everted membrane vesicles in a SecA-dependent manner, irrespective of their size. The mature domain of the smallest one was 45 amino acid residues in length. Contrary to the views previously presented by other workers, these results suggest that there is no sharp boundary at the reported regions for the translocation of presecretory proteins across the cytoplasmic membrane or for the requirement of SecA.