Mutational analysis of TraM correlates oligomerization and DNA binding with autoregulation and conjugative DNA transfer

F plasmid TraM, an autoregulatory homotetramer, is essential for F plasmid bacterial conjugative transfer, one of the major mechanisms for horizontal gene dissemination. TraM cooperatively binds to three sites (sbmA, -B, and -C) near the origin of transfer in the F plasmid. To examine whether or not tetramerization of TraM is required for autoregulation and F conjugation, we used a two-plasmid system to screen for autoregulation-defective traM mutants generated by random PCR mutagenesis. A total of 72 missense mutations in TraM affecting autoregulation were selected, all of which also resulted in a loss of TraM function during F conjugation. Mutational analysis of TraM defined three regions important for F conjugation, including residues 3-10 (region I), 31-53 (region II), and 80-121 (region III); in addition, residues 3-47 were also important for the immunoreactivity of TraM. Biochemical analysis of mutant proteins indicated that region I defined a DNA binding domain that was not involved in tetramerization, whereas regions II and III were important for both tetramerization and efficient DNA binding. Mutations in region III affected the cooperativity of binding of TraM to sbmA, -B, and -C. Our results suggest that tetramerization is important for specific DNA binding, which, in turn, is essential for traM autoregulation and F conjugation. These findings support the hypothesis that TraM functions as a "signaling" factor that triggers DNA transport during F conjugation.     

Dual control of quorum sensing by two TraM-type antiactivators in Agrobacterium tumefaciens octopine strain A6

Agrobacterium tumefaciens wild-type strains have a unique quorum-sensing (QS)-dependent Ti plasmid conjugative transfer phenotype in which QS signaling is activated by corresponding conjugative opine inducers. Strain K588, with a nopaline-type chromosomal background harboring an octopine-type Ti plasmid, however, is a spontaneous mutant displaying a constitutive phenotype in QS. In this study, we show that a single amino acid mutation (L54P) in the QS antiactivator TraM encoded by the traM gene of Ti plasmid is responsible for the constitutive phenotype of strain K588. Introduction of the L54P point mutation to the TraM of wild-type strain A6 by allelic replacement, however, failed to generate the expected constitutive phenotype in this octopine-type strain. Intriguingly, the QS-constitutive phenotype appeared when the pTiA6 carrying the mutated traM was placed in the chromosomal background of the nopaline-type strain C58C1RS, suggesting an unknown inhibitory factor(s) encoded by the chromosomal background of strain A6 but not by C58C1RS. Low-stringency Southern blotting analysis showed that strain A6, but not strain C58 and its derivatives, contains a second traM homologue. The homologue, designated traM2, has 64% and 65% identities with traM at the DNA and peptide levels, respectively. Similar to TraM, TraM2 is a potent antiactivator that functions by blocking TraR, the QS activator, from specific binding to the tra gene promoters. Deletion of traM2 in strain A6 harboring the mutated traM confers a constitutive QS phenotype. The results demonstrate that the QS system in strain A6 is subjected to the dual control of TraM and TraM2.     

Specific DNA binding of the TraM protein to the oriT region of plasmid R100.

The product of the traM gene of plasmid R100 was purified as the TraM-collagen-beta-galactosidase fusion protein (TraM*) by using a beta-galactosidase-specific affinity column, and the TraM portion of TraM* (TraM') was separated by collagenolysis. Both the TraM* and TraM' proteins were found to bind specifically to a broad region preceding the traM gene. This region (designated sbm) was located within the nonconserved region in oriT among conjugative plasmids related to R100. The region seems to contain four core binding sites (designated sbmA, sbmB, sbmC, and sbmD), each consisting of a similar number of nucleotides and including a homologous 15-bp sequence. This result, together with the observation that the TraM* protein was located in the membrane fraction, indicates the possibility that the TraM protein has a function in anchoring the oriT region of R100 at the sbm sites to the membrane pore, through which the single-stranded DNA is transferred to the recipient. sbmC and sbmD, each of which contained a characteristic inverted repeat sequence, overlapped with the promoter region for the traM gene. This suggests that the expression of the traM gene may be regulated by its own product.     

TraM of plasmid R1 controls transfer gene expression as an integrated control element in a complex regulatory network

Site-directed mutagenesis was used to investigate the functions of the traM gene in plasmid R1-mediated bacterial conjugation. Three mutant alleles, a null mutation, a sense mutation and a stop mutation, were recombined back into the R1-16 plasmid, a transfer-derepressed ( finO  ⁻) variant of plasmid R1. The frequency of conjugative transfer of the traM null mutant derivative of R1-16 was 10⁷-fold lower than that of the isogenic parent plasmid, showing the absolute requirement for this gene in conjugative transfer of plasmid R1. Measurements of the abundance of plasmid specified traJ , traA and traM mRNAs, TraM protein levels, and complementation studies indicated that the traM gene of plasmid R1 has at least two functions in conjugation: (i) positive control of transfer gene expression; and (ii) a function in a process distinct from gene expression. Since expression of the negatively autoregulated traM gene is itself affected positively by the expression of the transfer operon genes, this gene constitutes a decisive element within a regulatory circuit that co-ordinates expression of the genes necessary for horizontal DNA transfer. Based on our studies, we present a novel model for the regulation of the transfer genes of plasmid R1 that might also be applicable to other IncF plasmids.     

Transfer protein TraY of plasmid R1 stimulates TraI-catalyzed oriT cleavage in vivo

The effect of TraY protein on TraI-catalyzed strand scission at the R1 transfer origin (oriT) in vivo was investigated. As expected, the cleavage reaction was not detected in Escherichia coli cells expressing tral and the integration host factor (IHF) in the absence of other transfer proteins. The TraM dependence of strand scission was found to be inversely correlated with the presence of TraY. Thus, the TraY and TraM proteins could each enhance cleaving activity at oriT in the absence of the other. In contrast, no detectable intracellular cleaving activity was exhibited by TraI in an IHF mutant strain despite the additional presence of both TraM and TraY. An essential role for IHF in this reaction in vivo is, therefore, implied. Mobilization experiments employing recombinant R1 oriT constructions and a heterologous conjugative helper plasmid were used to investigate the independent contributions of TraY and TraM to the R1 relaxosome during bacterial conjugation. In accordance with earlier observations, traY was dispensable for mobilization in the presence of traM, but mobilization did not occur in the absence of both traM and traY. Interestingly, although the cleavage assays demonstrate that TraM and TraY independently promote strand scission in vivo, TraM remained essential for mobilization of the R1 origin even in the presence of TraY. These findings suggest that, whereas TraY and TraM function may overlap to a certain extent in the R1 relaxosome, TraM additionally performs a second function that is essential for successful conjugative transmission of plasmid DNA.     

The TraM protein of the conjugative plasmid F binds to the origin of transfer of the F and ColE1 plasmids

The gene encoding the TraM protein of the conjugative plasmid F was cloned, overexpressed and the gene product was purified. The TraM protein was found in the cytoplasm of cells carrying the F plasmid with a smaller amount in the inner membrane. DNase I footprinting experiments showed that the purified protein protects three regions in the F oriT locus with different affinity for the upper and lower strands of DNA. A 15-nucleotide motif was identified within the protected regions that represented the DNA-binding site. The TraM protein was also found to bind to a sequence in the oriT region of the non-conjugative plasmid ColE1 that resembles the three binding sites in the F oriT region.     

Characterizing the DNA contacts and cooperative binding of F plasmid TraM to its cognate sites at oriT

TraM is a DNA binding protein required for conjugative transfer of the self-transmissible IncF group of plasmids, including F, R1, and R100. F TraM binds to three sites in F oriT: two high affinity binding sites, sbmA and sbmB, which are direct repeats of nearly identical sequence involved in the autoregulation of the traM gene; and a lower affinity site, sbmC, an inverted repeat important for transfer, which is situated nearest to the nic site where transfer originates. TraM bound cooperatively to its binding sites at oriT; the presence of sbmA and sbmB increased the affinity for sbmC 10-fold. Bending of oriT DNA by TraM was minimal, suggesting that TraM, a tetramer, was able to loop the DNA when bound to sbmA and sbmB simultaneously. Hydroxyl radical footprinting of DNA of sbmA and sbmC revealed that TraM contacted the DNA within a region previously delineated by DNase I footprinting. TraM protected the CT bases within the sequence CTAG, which occurred at 12-base intervals on the top and bottom strand of sbmA, most consistently with other protected bases. The footprint on sbmC revealed that the predicted inverted repeats were protected by TraM with a pattern that began at the center of the repeats and radiated outward at 11-12 base intervals toward the 5'-ends of either strand. At high protein concentrations, this pattern extended beyond the footprint defined by DNase I, suggesting that the DNA was wrapped around the protein forming a nucleosome-like structure, which could aid in preparing the DNA for transfer.     

Mobilization of chimeric oriT plasmids by F and R100-1: role of relaxosome formation in defining plasmid specificity

Cleavage at the F plasmid nic site within the origin of transfer (oriT) requires the F-encoded proteins TraY and TraI and the host-encoded protein integration host factor in vitro. We confirm that F TraY, but not F TraM, is required for cleavage at nic in vivo. Chimeric plasmids were constructed which contained either the entire F or R100-1 oriT regions or various combinations of nic, TraY, and TraM binding sites, in addition to the traM gene. The efficiency of cleavage at nic and the frequency of mobilization were assayed in the presence of F or R100-1 plasmids. The ability of these chimeric plasmids to complement an F traM mutant or affect F transfer via negative dominance was also measured using transfer efficiency assays. In cases where cleavage at nic was detected, R100-1 TraI was not sensitive to the two-base difference in sequence immediately downstream of nic, while F TraI was specific for the F sequence. Plasmid transfer was detected only when TraM was able to bind to its cognate sites within oriT. High-affinity binding of TraY in cis to oriT allowed detection of cleavage at nic but was not required for efficient mobilization. Taken together, our results suggest that stable relaxosomes, consisting of TraI, -M, and -Y bound to oriT are preferentially targeted to the transfer apparatus (transferosome).     

The TraM protein of plasmid R1 is a DNA-binding protein

The TraM protein of the resistance plasmid R1 was purified to homogeneity and used for DNA-binding studies. Both gel retardation- and footprint experiments showed that TraM specifically binds to DNA of plasmid R1 comprising the region between the origin of transfer and the traM gene. Several TraM molecules bind and, according to the footprint experiments, two distinct sites of specific binding exist. The two sites are separated from each other by 12 nucleotides and each contains an inverted repeat. DNase I protection assays showed that the initial TraM binding occurs at these palindromic sequences. At higher protein concentrations the lengths of the DNA segments protected by TraM were increased towards the traM gene. In one region this extension leads to binding of TraM protein at its own promoters.     

Characterization of the oriT region of the IncFV plasmid pED208

DNA sequence analysis of a 2.2kb EcoRI-HindIII fragment from pED208, the derepressed form of the IncFV plasmid Folac, revealed sequences highly homologous to the oriT region, traM, and traJ genes of other IncF plasmids. The TraM protein was purified and immunoblots of fractionated cells containing pED208 or Folac showed that TraM was predominantly in the cytoplasm. Using DNA retardation assays and the DNase I footprinting technique, the TraM protein was found to bind to three large motifs in the oriT region: (I) an inverted repeat, (II) two direct repeats, and (III) the traM promoter region. These three footprint regions contained a Hinfl-like sequence (GANTC) that appeared 16 times, spaced 11-12 bp (or multiples thereof) apart, suggesting that TraM protein binds in a complex manner over this entire region.     

Structural basis of cooperative DNA recognition by the plasmid conjugation factor, TraM

The conjugative transfer of F-like plasmids such as F, R1, R100 and pED208, between bacterial cells requires TraM, a plasmid-encoded DNA-binding protein. TraM tetramers bridge the origin of transfer (oriT) to a key component of the conjugative pore, the coupling protein TraD. Here we show that TraM recognizes a high-affinity DNA-binding site, sbmA, as a cooperative dimer of tetramers. The crystal structure of the TraM-sbmA complex from the plasmid pED208 shows that binding cooperativity is mediated by DNA kinking and unwinding, without any direct contact between tetramers. Sequence-specific DNA recognition is carried out by TraM's N-terminal ribbon-helix-helix (RHH) domains, which bind DNA in a staggered arrangement. We demonstrate that both DNA-binding specificity, as well as selective interactions between TraM and the C-terminal tail of its cognate TraD mediate conjugation specificity within the F-like family of plasmids. The ability of TraM to cooperatively bind DNA without interaction between tetramers leaves the C-terminal TraM tetramerization domains free to make multiple interactions with TraD, driving recruitment of the plasmid to the conjugative pore.     

Mechanistic Basis of Plasmid-Specific DNA Binding of the F Plasmid Regulatory Protein,TraM

The conjugative transfer of bacterial F plasmids relies on TraM, a plasmid-encoded protein that recognizes multiple DNA sites to recruit the plasmid to the conjugative pore. In spite of the high degree of amino acid sequence conservation between TraM proteins, many of these proteins have markedly different DNA binding specificities that ensure the selective recruitment of a plasmid to its cognate pore. Here we present the structure of F TraM RHH (ribbon–helix–helix) domain bound to its sbmA site. The structure indicates that a pair of TraM tetramers cooperatively binds an underwound sbmA site containing 12 base pairs per turn. The sbmA is composed of 4 copies of a 5-base-pair motif, each of which is recognized by an RHH domain. The structure reveals that a single conservative amino acid difference in the RHH β-ribbon between F and pED208 TraM changes its specificity for its cognate 5-base-pair sequence motif. Specificity is also dictated by the positioning of 2-base-pair spacer elements within sbmA; in F sbmA, the spacers are positioned between motifs 1 and 2 and between motifs 3 and 4, whereas in pED208 sbmA, there is a single spacer between motifs 2 and 3. We also demonstrate that a pair of F TraM tetramers can cooperatively bind its sbmC site with an affinity similar to that of sbmA in spite of a lack of sequence similarity between these DNA elements. These results provide a basis for the prediction of the DNA binding properties of the family of TraM proteins.     

Origin of transfer of IncF plasmids and nucleotide sequences of the type II oriT, traM, and traY alleles from ColB4-K98 and the type IV traY allele from R100-1.

The complete nucleotide sequences of the ColB4-K98 (ColB4) plasmid transfer genes oriT, traM, and traY as well as the traY gene of R100-1 are presented and compared with the corresponding regions from the conjugative plasmids F, R1, and R100. The sequence encoding the oriT nick sites and surrounding inverted repeats identified in F was conserved in ColB4. The adenine-thymine-rich sequence following these nick sites was conserved in R1 and ColB4 but differed in F and R100, indicating that this region may serve as the recognition site for the traY protein. A series of direct repeats unique to the ColB4 plasmid was found in the region of dyad symmetry following this AT-rich region. This area also encodes 21-base-pair direct repeats which are homologous to those in F and R100. The traM gene product may bind in this region. Overlapping and following these repeats is the promoter(s) for the traM protein. The traM protein from ColB4 is similar to the equivalent products from F, R1, and R100. The traY protein from ColB4 is highly homologous to the R1 traY gene product, while the predicted R100-1 traY product differs at several positions. These differences presumably define the different alleles of traM and traY previously identified for IncF plasmids by genetic criteria. The translational start codons of the ColB4 and R100-1 traY genes are GUG and UUG, respectively, two examples of rare initiator codon usage.