湖北郧西黄龙洞更新世晚期人类牙齿

对2004—2006年在湖北省郧西县黄龙洞发现的7枚更新世晚期人类牙齿进行了观测与分析, 在此基础上与相关的化石人类及近代现代人类标本进行了对比。本研究发现:黄龙洞人类牙齿总体特征与现代人接近, 同时也保留部分可能属于更新世晚期人类的特点, 包括前部牙齿(侧门齿与犬齿)尺寸及粗壮程度都明显大于现代人。黄龙洞人类牙齿呈现的铲形门齿、双铲形门齿及臼齿釉质延伸说明,当时人类已经具有了东亚人群的典型牙齿形态特征。     

贵州兴义猫猫洞更新世晚期人类牙齿釉质崩裂痕迹

作为一种特殊形式的牙齿磨耗与使用痕迹,牙齿崩裂与古人类及古代人群食物质地、获取与制作食物方式、某些行为活动、生活习俗密切相关。然而,迄今对人类牙齿崩裂的关注程度及开展的研究还不多,尤其缺乏更新世晚期人类牙齿崩裂出现率和表现特点方面的数据。本文对发现于贵州兴义猫猫洞的更新世晚期人类牙齿釉质崩裂痕迹大小、出现率、表现特点进行了观测分析。研究发现,附连在3件猫猫洞人类下颌骨上的牙齿具有明显的釉质崩裂现象,出现率与生活环境恶劣的狩猎-采集人群接近。值得注意的是猫猫洞人类牙齿釉质崩裂出现在几乎所有臼齿的咬合面边缘。作者认为出现在猫猫洞人类臼齿的釉质崩裂是由于强力咀嚼和研磨坚硬食物所致,推测当时人类的食物粗糙,坚硬,富含颗粒(如坚果、种子等)。在猫猫洞下颌骨上观察到的波及几乎全部牙齿的牙周病也为猫猫洞人类严酷生活环境和粗糙食物的推测提供了一定程度的支持。此外,几乎所有具有釉质崩裂的臼齿都呈现大小不等的多发性的釉质崩裂痕迹的表现特点提示猫猫洞人类长时间大量食用这种粗糙、坚硬食物。     

2010年度《人类学学报》优秀论文评选揭晓

在本刊2010年度发表的文章中,下列4篇获得优秀论文奖:1)湖北郧西黄龙洞更新世晚期人类牙齿磨耗与使用痕迹……刘武,武仙竹,吴秀杰,等(1)     

新疆且末扎滚鲁克墓地二期居民的牙齿磨耗

本文对新疆且末扎滚鲁克墓地二期出土208例头骨上的1849枚牙齿进行了观察与研究。将所有个体按照年龄和性别分组,通过计算每个个体上颌或下颌骨上各牙齿相对第1臼齿的磨耗指数,分析各组之间相对磨耗指数的分布差异。经过与国内外不同人群的对比,对扎滚鲁克居民的牙齿磨耗模式特点以及可能存在的牙齿使用方式、行为特征等内容进行了初步探讨。结果显示,该人群的牙齿磨耗随着年龄增长显著增加,不同年龄组人群之间前后牙齿磨耗情况有很大的差异,牙齿磨耗在性别间差异并不显著。下颌个体出现了较为普遍的前牙磨耗比后牙偏严重的现象,这种现象主要集中在中年组下颌上。这种不寻常的下颌前牙磨耗较后牙偏重现象可能受到牙齿的工具性使用,牙齿萌出顺序以及年龄三方面因素共同作用的影响;中年个体下颌前牙磨耗的偏重现象可能反映了人群的行为特征。     

广西敢造遗址史前居民口腔的健康状况

广西扶绥敢造遗址是华南新石器时代一处典型的河岸贝丘遗址,其人骨测年结果的上限为8488 BC,下限为6492 BC。本文对敢造遗址2014年出土的108例个体的999枚恒齿进行观察统计,结果显示居民的饮食结构应是以肉食为主并辅以富含淀粉的块茎类植物。该遗址居民的龋齿率高于部分农业人群,但远低于同为华南渔猎—采集经济的鲤鱼墩、甑皮岩和顶蛳山遗址,其原因应与食用块茎类植物的多寡有关。较高的牙结石罹患率(89.86%)可能与鱼类、贝类等高蛋白饮食有关。相比农业、游牧或狩猎人群,该遗址居民偏重的牙齿磨耗可能与食用含沙量较大的螺类、贝类等有关;肉类食物的食用导致该遗址居民上颌前部牙齿磨耗重于后部牙齿,而“上颌前部牙齿舌侧过度磨耗”现象的出现则与食用块茎类植物有关。     

当代水族男性的牙齿磨耗特点及其成因北大核心CSCDCSSCI

一直以来,有关人类牙齿磨耗的研究主要集中在年龄判定和生业方式比较方面。然而,很多研究因样本人群来源复杂、忽视个体牙齿磨耗的特殊性及缺乏足够的个人信息,很难进一步解释其牙齿磨耗特点的成因。本文基于对当代水族男性牙齿磨耗的记录和相关信息,通过梳理该人群牙齿磨耗的一般特点和特殊磨耗形式,探讨了有关影响该人群牙齿磨耗的可能因素。笔者发现,总体来说,该人群的牙齿磨耗较轻,牙齿磨耗水平与其年龄分布呈正相关关系,符合人类牙齿面随年龄增长而发生退行性生理磨耗的规律。牙齿磨耗等级在不同年龄中呈镶嵌式分布,某些个体存在越位磨耗现象。从本文的结果看,这些现象的产生除了退行性生理磨耗的原因外,还可能与口腔健康状况、饮食结构和少餐习惯等因素密切相关。     

当代水族男性的牙齿磨耗特点及其成因

一直以来,有关人类牙齿磨耗的研究主要集中在年龄判定和生业方式比较方面。然而,很多研究因样本人群来源复杂、忽视个体牙齿磨耗的特殊性及缺乏足够的个人信息,很难进一步解释其牙齿磨耗特点的成因。本文基于对当代水族男性牙齿磨耗的记录和相关信息,通过梳理该人群牙齿磨耗的一般特点和特殊磨耗形式,探讨了有关影响该人群牙齿磨耗的可能因素。笔者发现,总体来说,该人群的牙齿磨耗较轻,牙齿磨耗水平与其年龄分布呈正相关关系,符合人类牙齿面随年龄增长而发生退行性生理磨耗的规律。牙齿磨耗等级在不同年龄中呈镶嵌式分布,某些个体存在越位磨耗现象。从本文的结果看,这些现象的产生除了退行性生理磨耗的原因外,还可能与口腔健康状况、饮食结构和少餐习惯等因素密切相关。     

人类牙齿齿冠和齿根分离两种技术方法对牙釉质厚度测量的影响

在基于计算机断层扫描技术（CT）和虚拟图像处理技术的灵长类牙齿测量学研究中,经常需要分离三维虚拟模型的齿冠和齿根,再进行后续测量工作,如计算机辅助的生物力学分析、釉质厚度测量等。而分离齿冠和齿根这一步骤,目前有多种方法,如,1)根据齿颈线切分齿冠,或2)人工建立基底平面切分齿冠。为了评估这两种不同的处理方式对后续的牙齿测量学上的影响,本文使用三维方法测量了82例化石和现代人类下颌后部牙齿的釉质厚度,包括南方古猿、早期人属、尼安德特人和现代人。使用配对t检验对比发现,两种方法得到的釉质厚度数值上没有显著差别,但随后进行的种间比较发现,使用基底平面切分齿冠的方法比较费时,更依赖于测量者的人工操作,并且可能弱化了物种间前臼齿绝对釉质厚度的差异,造成系统误差。其原因是对于前臼齿和前部牙齿等齿颈线形状不规则的标本,基底平面难以建立或误差较大。在未来对釉质厚度的种间差异的研究中,特别对齿颈线形状不规则的标本（如人类前部牙齿及猩猩、黑猩猩的牙齿等）,本文推荐使用齿颈线分离齿冠和齿根,测量和计算齿颈线之上的釉质厚度。釉质厚度有一定的分类学、功能形态学和系统发育学意义。本文积累了一批可供未来对比研究的原始数据,并且发现尼安德特人前臼齿的相对釉质厚度显著小于现代人,这与前人利用臼齿、犬齿所做的对比研究结果相同,支持了尼安德特人拥有较薄的相对釉质厚度这一观点。     

新疆罗布泊小河墓地居民的口腔健康与饮食

小河墓地是新疆罗布泊地区一处重要的早期青铜时代墓地。本文主要对该墓地出土颅骨所附牙齿的磨耗程度及牙结石沉积状况进行了观察、量化统计和分析,同时也对该人群其他的口腔疾病如根尖脓肿、颞下颌关节病变、生前牙齿脱落等做了简单的统计,以期从古病理学的角度获取当时居民的口腔健康、食物类型和饮食习惯等信息。本研究发现:1)小河人群的牙齿磨耗程度远远高于对比组的古代居民,其上腭圆枕及颞下颌关节炎出现率较高,存在牙齿崩裂现象,且其前后部牙齿磨耗差异不大。这一方面说明其食物加工技术比较落后,食物粗糙坚硬;另一方面小河居民的经济生活方式和食物构成都比较复杂,不同的食物对前部和后部牙齿磨耗的程度造成了不同的影响;此外,小河人群风沙肆虐的生活环境也对其严重牙齿磨耗的形成产生了一定影响。2)小河人群异常严重的牙结石沉积归功于其高蛋白质和碳水化合物的饮食,以及生活用水的水质。3)统计分析发现两性存在上、下颌犬齿的磨耗差异,而这一情况可能暗示了在家庭手工业方面存在男女分工的现象。     

贵州盘县大洞发现的人类牙齿化石

对在盘县对大洞发现的一枚人类上颌内侧门齿和一枚人类下颌犬齿的观察研究显示,门齿齿冠舌侧面铲形结构,齿结节,指状突及犬齿的齿带等结构具有某些与北京猿人牙齿的相似的特征;但在这些结构的复杂程度及齿冠测量特征等方面又呈出早期智人的特点。     

Structural Morphology of Molars in Large Mammalian Herbivores: Enamel Content Varies between Tooth Positions

The distribution of dental tissues in mammalian herbivores can be very different from taxon to taxon. While grazers tend to have more elaborated and complexly folded enamel ridges, browsers have less complex enamel ridges which can even be so far reduced that they are completely lost. The gradient in relative enamel content and complexity of structures has so far not been addressed within a single species. However, several studies have noted tooth position specific wear rates in small mammals (rabbits, guinea pigs) which may be related to individual tooth morphology. We investigate whether differentiated enamel content by tooth position is also to be found in large herbivores. We use CT-scanning techniques to quantify relative enamel content in upper and lower molar teeth of 21 large herbivorous mammal species. By using a broad approach and including both perissodactyls and artiodactyls, we address phylogenetic intraspecific differences in relative enamel content. We find that enamel is highly unevenly distributed among molars (upper M1, M2, M3 and lower m1, m2, m3) in most taxa and that relative enamel content is independent of phylogeny. Overall, relative enamel content increases along the molar tooth row and is significantly higher in lower molars compared to upper molars. We relate this differential enamel content to prolonged mineralisation in the posterior tooth positions and suggest a compensatory function of m3 and M3 for functional losses of anterior teeth.     

Tooth wear and the position of the mental foramen

Variation in the position of the mental foramen with respect to the teeth ("apparent" position) seems to be associated with race, but in the determination of this position, factors which affect the disposition of the teeth plainly have a bearing on the results. The apparent position was investigated in a sample of southern Chinese skulls of known age which were classified by the degree of tooth wear. Controlling for "true" position and size of the mandible, a highly significant correlation between wear and position was found, age and tooth size having no significant contribution as additional explanatory variables. The effect of tooth wear on the apparent position of the foramen may partly explain racial variation.     

军都山古代人群牙齿磨耗及其饮食

以军都山墓地为代表的"玉皇庙文化"系中国北方青铜时代的一支具有鲜明地方特色的少数部族文化。本文对军都山墓地出土人骨牙齿标本作牙齿磨耗状况分析,试图为其饮食结构和社会经济形态的探讨提供线索。结果显示:军都山古代人群中,相同年龄组的男女两性牙齿磨耗差异不大;前部牙齿磨耗轻于后部臼齿,第一臼齿磨耗最重;臼齿磨耗样式大多呈现"正常平匀"式,臼齿磨耗角度大多较小,两者均随年龄而变化但没有显著的性别差异。经与其他样本组的对比认为军都山古代人群牙齿磨耗的特点可能与其社会经济农牧兼营的性质有关,推测动物性食物(肉食)可能在军都山古代人群主要饮食结构中占据重要比例,并包含有一定的农业经济成分。不同游牧人群牙齿磨耗程度差异较大,只有结合了磨耗形态及其他信息才有可能更切实地反映其饮食状况。     

Tooth development in a scincid lizard, Chalcides viridanus (Squamata), with particular attention to enamel formation

Comparative analysis of tooth development in the main vertebrate lineages is needed to determine the various evolutionary routes leading to current dentition in living vertebrates. We have used light, scanning and transmission electron microscopy to study tooth morphology and the main stages of tooth development in the scincid lizard, Chalcides viridanus, viz., from late embryos to 6-year-old specimens of a laboratory-bred colony, and from early initiation stages to complete differentiation and attachment, including resorption and enamel formation. In C. viridanus, all teeth of a jaw have a similar morphology but tooth shape, size and orientation change during ontogeny, with a constant number of tooth positions. Tooth morphology changes from a simple smooth cone in the late embryo to the typical adult aspect of two cusps and several ridges via successive tooth replacement at every position. First-generation teeth are initiated by interaction between the oral epithelium and subjacent mesenchyme. The dental lamina of these teeth directly branches from the basal layer of the oral epithelium. On replacement-tooth initiation, the dental lamina spreads from the enamel organ of the previous tooth. The epithelial cell population, at the dental lamina extremity and near the bone support surface, proliferates and differentiates into the enamel organ, the inner (IDE) and outer dental epithelium being separated by stellate reticulum. IDE differentiates into ameloblasts, which produce enamel matrix components. In the region facing differentiating IDE, mesenchymal cells differentiate into dental papilla and give rise to odontoblasts, which first deposit a layer of predentin matrix. The first elements of the enamel matrix are then synthesised by ameloblasts. Matrix mineralisation starts in the upper region of the tooth (dentin then enamel). Enamel maturation begins once the enamel matrix layer is complete. Concomitantly, dental matrices are deposited towards the base of the dentin cone. Maturation of the enamel matrix progresses from top to base; dentin mineralisation proceeds centripetally from the dentin–enamel junction towards the pulp cavity. Tooth attachment is pleurodont and tooth replacement occurs from the lingual side from which the dentin cone of the functional teeth is resorbed. Resorption starts from a deeper region in adults than in juveniles. Our results lead us to conclude that tooth morphogenesis and differentiation in this lizard are similar to those described for mammalian teeth. However, Tomes processes and enamel prisms are absent.     

Functional implications of primate enamel thickness.

Recent evolutionary interpretations of Hominoidea have postulated functional relationships between tooth form, diet and masticatory biomechanics. A major consideration is the durability of the tooth under certain dietary conditions. Teeth with low cusps and thicker enamel are able to withstand heavy mastication of abrasive food bolus for a longer period. When comparisons are made between species of higher primates the variables of tooth size, cusp morphology, and enamel thickness appear to be related but until now no systematic analysis has been made to determine the functional relevance of several dental dimensions. This study provides data gained from comparisons of dentition of nine species of primates. Histological sections were made of the post canine teeth and 21 dimensions were compared. The relevant dimensions identified serve to withstand dental wear. The distribution of thicker enamel corresponded to the observed wear planes. Humans had thicker enamel than pongids while the macaque had the thinnest. These preliminary results tend to support theories which explain low, thick, enameled cusps in hominids.     

Measurements of tooth wear among Australian Aborigines: I. Serial loss of the enamel crown

The dental casts made from Aboriginal children during the course of a longitudinal growth study in Central Australia provided material for analyzing tooth wear under known environmental conditions. The wear facets produced on the occlusal surfaces were clearly preserved on the dental stone casts and recorded the progress of enamel attrition from ages 6 to 18. These casts were photographed and traced by electronic planimetric methods that automatically recorded the location and size of wear facets on the first and second permanent molars. These areas of worn tooth surface were compared to the total tooth surface. The worn surface was regressed on age to calculate wear rates of each tooth. Discriminant analyses were also performed to determine the significance of dental attrition differences between the sexes at each age group. The total wear on each tooth was highly correlated with age as expected but females wore their teeth at a significantly higher rate than males. The mandibular molars wore more rapidly than maxillary teeth in both sexes. The discriminant analysis successfully grouped 91% of the cases according to age and sex. Pattern of wear, the location, and size of wear facets also differed between age groups and sex. The questions of why there is a difference between male and female wear or why there is greater wear on one arch or arch region have no ready answers. The differing rates and pattern of dental wear do suggest that arch shape and growth rates may be the answer though it has yet to be tested. However, the occlusal surface wear is useful for age estimation in a population and provides a record of shifting masticatory forces during growth.     

鲤鱼墩遗址出土人牙的牙齿磨耗和龋齿

距今约6000年以前, 华南先民以渔猎采集经济为主, 并辅之以块茎植物种植的观点已为学界所共识。这种类型的生业方式与长江中下游、华北及其以北地区有着较大的区别。这不仅反映在遗址出土的动植物遗存和生产工具的不同, 也体现在出土人骨体质特征的差异上。后者已初步为C、N稳定同位素的比较研究所证实。本文则利用鲤鱼墩遗址出土的人牙,从牙齿磨耗和龋齿两方面考察上述差异。     

Sauropod teeth from the Upper Cretaceous Bissekty Formation of Uzbekistan

The isolated adult teeth of titanosaurian sauropods from the Upper Cretaceous Bissekty Formation at Dzharakuduk, Uzbekistan, differ little in overall structure but show considerable variation in enamel sculpturing and wear patterns. The crown shape of unworn juvenile teeth ranges from lanceolate to conical. Most specimens have enamel texture resembling crumpled paper or completely smooth enamel. Longitudinal grooves along the mesial and distal edges are present on only a few tooth crowns and might be developed on both the labial and lingual sides. Among 252 worn tooth crowns there are eight variants of wear patterns, all possible combinations of 0–2 apical and 0–2 lateral wear facets. The most common is wear pattern A1L0 (one apical facet, no lateral facets; 62.7%). The next most common variant has two apical and no lateral facets (A2L0, 12.3%). These apical wear facets include the primary wear facets, which are produced by an opposing functional tooth, and secondary wear facets, which are produced by a replacing upper tooth coming into contact with the functional lower tooth at a late wear stage. The relative abundance of tooth crowns with two apical wear facets possibly suggests incipient development of a tooth battery in the Bissekty titanosaur.     

Severe wear and tooth loss in wild ring-tailed lemurs (Lemur catta): a function of feeding ecology, dental structure, and individual life history

The ring-tailed lemurs at Beza Mahafaly Special Reserve, Madagascar, exhibit a high frequency of severe wear and antemortem tooth loss. As part of a long-term study, we collected dental data on 83 living adult ring-tailed lemurs during 2003 and 2004. Among these individuals, 192 teeth were scored as absent. The most frequently missing tooth position is M1 (24%). As M1 is the first tooth to erupt, its high frequency of absence (primarily a result of wear) is not remarkable. However, the remaining pattern of tooth loss does not correlate with the sequence of eruption. We suggest that this pattern is a function of 1) feeding ecology, as hard, tough tamarind fruit is a key fallback food of ring-tailed lemurs living in gallery forests; 2) food processing, as tamarind fruit is primarily processed in the P3-M1 region of the mouth; and 3) tooth structure, as ring-tailed lemurs possess thin dental enamel. The incongruity between thin enamel and use of a hard, tough fallback food suggests that ring-tailed lemurs living in riverine gallery forests may rely on resources not used in the past. When comparing dental health in the same individuals (n=50) between 2003 and 2004, we found that individual tooth loss can show a rapid increase over the span of one year, increasing by as much as 20%. Despite this rapid loss, individuals are able to survive, sometimes benefiting from unintentional assistance from conspecifics, from which partially processed tamarind fruit is obtained. Although less frequent in this population, these longitudinal data also illustrate that ring-tailed lemurs lose teeth due to damage and disease, similar to other nonhuman primates. The relationship between tooth loss, feeding ecology, dental structure, and individual life history in this population has implications for interpreting behavior based on tooth loss in the hominid fossil record.     

Specialized wear facets and late ontogeny in mammalian dentitions

Abstract

Many types of wear facets can be found in mammalian teeth. Some are related to the initial surface, others use the cross-section of the enamel as the main tool. In primary occlusal surfaces facets mark the gradual wear, that are related to a relatively late ontogeny. Facets in teeth with secondary occlusal surfaces, however, represent specific arrangements of crests of enamel and dentine. Such facets require some initial wear to become fully functional. The tooth morphology guarantees such facets to be effective for a long period of time. Therefore they can be discriminated as specialized facets. From the different types of facets three specialized ones were selected, blade facets, rasp-facets, and nipper-facets, because they ate widely distributed, function differently, and are comparable with mechanical tools. They are long lasting and differ in the amount of exposed dentine. The amount of dentine is used to differentiate phases during late ontogeny, the part of the life history, when teeth are exposed to wear. Consequently the various types of facets can be related to different ontogenetic phases. The relevant phases are prolonged at the cost of other ontogenetic phases. Therefore, the various specialized wear facets represent heterochronies within the ontogeny of teeth.