Local heating of human skin by millimeter waves: a kinetics study

Heating rates of human skin exposed locally to 42.25 GHz mm waves, coming from a waveguide (WG) opening or a YAV device designed for therapeutic application, were studied in vivo using infrared (IR) thermography. For both radiators, the power density distribution was described by a circularly symmetrical Gaussian type function on the exposed skin surface. Insertion of a small thermocouple (d = 0.1 mm) in the exposed area did not produce any significant artifact, either in the power density distribution or kinetics measurement, providing it was perpendicular to the E vector. The heating kinetics in the skin exposed with either the WG opening or the YAV device were well fitted to solutions of the 2-D bio-heat transfer equation for homogeneous tissue. Changes in irradiating beam size (1-8 mm) had no detectable effect on the initial (0.3-3.0 s) phase of the heating kinetics. However, the amplitude of the kinetics decreased substantially with decreasing the beam size. As the temperature rise in the time interval necessary for reliable measurement of the initial temperature rise rate was very small, an accurate experimental determination of specific absorption rate (SAR) becomes practically impossible at the low intensities normally used in our experiments. The correct SAR values may be found from fitting of the model to the heating kinetics. Bioelectromagnetics 24:571-581, 2003.     

Response of the soil seed‐bank of Cumberland Plain Woodland to heating

Abstract Soil was investigated in a Cumberland Plain Woodland community to determine the presence of a soil seed‐bank and whether species richness and abundance of plants germinating from it were affected by heating such as that experienced in a fire. Soil samples were taken from the Holsworthy Military Area, in the south‐eastern region of the Sydney Basin, New South Wales, Australia, and one of four treatments was applied; soil was heated to 80°C, 40°C, unheated or unheated with litter not removed. Sixty‐eight species, representing 26 families including 11 exotic and 57 native species germinated from the soil. Herbs and grasses dominated and were in similar proportions to those surveyed in the above‐ground vegetation, suggesting that the soil seed‐bank reflected the current structure of the vegetation, although species composition differed. Species responded differently to heating. The seeds of some species germinated when heated at a higher temperature (80°C), particularly those from the family Fabaceae, whereas other species were more common in unheated or lightly heated samples (40°C). This suggests that fire is likely to change the species composition of the above‐ground vegetation and indicates that management must ensure that species that do not germinate when heated are maintained, as well as those species that germinate following heating. A large proportion of soil seed‐bank species showed low germination rates in the trials, and 112 above‐ground species did not germinate in the soil samples. We do not understand whether species of these two sets do not produce a soil‐stored seed‐bank or whether the seed‐bank has been depleted by past practices at Holsworthy. Further research is needed.     

Effects of scrotal heating on sperm surface protein PH-20 expression in sheep

Sperm surface protein PH-20 expression was studied during spermatogenesis in pubertal and adult sheep, using molecular and histological methods. The effects of 24 hr of insulation raising scrotal temperatures to 39 degrees C on PH-20 expression in ejaculated sheep sperm were also determined. A 282 nt cDNA fragment of ovine PH-20 was identified in total RNA extracts of sheep testes, which exhibited 76% identity at the nucleotide level with the equivalent region of the human sequence. Ovine PH-20 mRNA and immunoreactivity were identified only in adult ram testis and not in peri-pubertal ram testis tubules lacking round spermatids, nor in adult sheep brain, pituitary, heart, spleen, lung, liver, kidney, epididymis, or ovary. Ovine PH-20 protein was distributed predominantly on the postacrosomal membrane and was also present on the anterior membrane of the sperm head in fresh, unheated sheep semen. Scrotal heating caused a significant, transient decrease in the percentage of PH-20 immunoreactive sperm, but did not change the pattern of PH-20 staining on the sperm head. The results strongly suggest that ovine PH-20 is postmeiotically expressed in haploid germ cells in sheep testis and is arrayed on the membrane of the mature ovine spermatozoon. Scrotal heating appears to have few effects on PH-20 expression and distribution on ejaculated sperm.     

Integration of plasmonic heating and on‐chip temperature sensor for nucleic acid amplification assays

Nucleic acid tests have been widely used for diagnosis of diseases by detecting the relevant genetic markers that are usually amplified using polymerase chain reaction (PCR). This work reports the use of a plasmonic device as an efficient and low‐cost PCR thermocycler to facilitate nucleic acid‐based diagnosis. The thermoplasmonic device, consisting of a one‐dimensional metal grating, exploited the strong light absorption of plasmonic resonance modes to heat up PCR reagents using a near‐infrared laser source. The plasmonic device also integrated a thin‐film thermocouple on the metal grating to monitor the sample temperature. The plasmonic thermocycler is capable of performing a PCR amplification cycle in ~2.5 minutes. We successfully demonstrated the multiplex and real‐time PCR amplifications of the antibiotic resistance genes using the genomic DNAs extracted from Acinetobacter baumannii, Klebsiella pneumonia, Escherichia coli and Campylobacter.     

Microwave-specific heating affects gene expression

The effects of low-level microwave radiation on gene expression in Escherichia coli have been examined in a sensitive model. We confirm the previously reported existence of an increase in β-galactosidase expression by microwave radiation—an increase not duplicated by bulk heating. However, the effect was not frequency dependent and appeared to be due to heating effects peculiar to microwaves. These results indicate that small thermal gradients may be a source of biological effects of non-ionizing radiation.     

Home heating in temperate Australia

Background, aim, and scope  

Home heating is an important component of life in inland temperate Australia, and firewood remains a common and relatively inexpensive fuel. However, supplies of firewood are becoming scarce, and excessive smoke pollution is becoming a problem in some places, partly due to poor management of fires. The alternative energy sources are electricity and gas, and the aim of this study is to compare the relative merits of these three energy sources for their impacts on the physical environment.     

Variability of heating and cooling rates during radiant heating in a scincid lizard, Egernia cunninghami

Heating rates were significantly greater than cooling rates in Egernia cunninghami. Male lizards had significantly slower cooling rates than females, while heating rates of both sexes were similar. Faster heating and cooling rates were recorded in the earlier months of the 32-week experiment than during the winter season. The effect of infra-red heat intensity on heating and cooling rates was apparent only in the winter months. Painting the animals black retarded the radiant heating rates, rather than enhancing them.     

Adiabatic heating and membrane excitation

Excitable membranes can be induced to show an increase in conductivity such as that encountered in the “action potential.” We suggest that this transient condition may be the result of heating of the sites through which the ions pass. The heat could be generated by an adiabatic phase transition of the membrane lipids. Equations derived on the basis of these ideas give good agreement with voltage clamped current measurements in algae and perfused squid axon.     

Evaluating microbial contaminations of alternative heating oils

Since 2008, European and German legislative initiatives for climate protection and reduced dependency on fossil resources led to the introduction of biofuels as CO₂-reduced alternatives in the heating oil sector. In the case of biodiesel, customers were confronted with accelerated microbial contaminations during storage. Since then, other fuel alternatives, like hydrogenated vegetable oils (HVOs), gas-to-liquid (GtL) products, or oxymethylene ether (OME) have been developed. In this study, we use online monitoring of microbial CO₂ production and the simulation of onset of microbial contamination to investigate the contamination potential of fuel alternatives during storage. As references, fossil heating oil of German refineries are used. Biodiesel blends with fossil heating oils confirmed the promotion of microbial activity. In stark contrast, OMEs have an antimicrobial effect. The paraffinic Fischer–Tropsch products and biogenic hydrogenation products demonstrate to be at least as resistant to microbial contamination as fossil heating oils despite allowing a diversity of representative microbes. Through mass spectrometry, elemental analysis, and microbial sequencing, we can discuss fuel properties that affect microbial contaminations. In summary, novel, non-fossil heating oils show clear differences in microbial resistance during long-term storage. Designing blends with an intrinsic resistance against microbial contamination and hence reduced activity might be an option.     

Susceptibility of ectomycorrhizal fungi to soil heating

Ectomycorrhizal (EcM) fungi are an important biotic factor for successful tree recruitment because they enhance plant growth and alleviate drought stress of their hosts. Thus, EcM propagules are expected to be a key factor for forest regeneration after major disturbance events such as stand-replacing forest fires. Yet the susceptibility of soil-borne EcM fungi to heat is unclear. In this study, we investigated the heat tolerance of EcM fungi of Scots pine (Pinus sylvestris L., Pinaceae). Soil samples of three soil depths were heated to the temperature of 45, 60 and 70 °C, respectively, and surviving EcM fungi were assessed by a bioassay using Scots pine as an experimental host plant. EcM species were identified by a combination of morphotyping and sequencing of the ITS region. We found that mean number of species per sample was reduced by the 60 and 70 °C treatment, but not by the 45 °C treatment. Species composition changed due to heat. While some EcM fungi species did not survive heating, the majority of species was also found in the heated samples. The most frequent species in the heat treatment were Rhizopogon roseolus, Cenococcum geophilum and several unidentified species.     

Local heating, but not indirect whole body heating, increases human skeletal muscle blood flow

For decades it was believed that direct and indirect heating (the latter of which elevates blood and core temperatures without directly heating the area being evaluated) increases skin but not skeletal muscle blood flow. Recent results, however, suggest that passive heating of the leg may increase muscle blood flow. Using the technique of positron-emission tomography, the present study tested the hypothesis that both direct and indirect heating increases muscle blood flow. Calf muscle and skin blood flows were evaluated from eight subjects during normothermic baseline, during local heating of the right calf [only the right calf was exposed to the heating source (water-perfused suit)], and during indirect whole body heat stress in which the left calf was not exposed to the heating source. Local heating increased intramuscular temperature of the right calf from 33.4 ± 1.0°C to 37.4 ± 0.8°C, without changing intestinal temperature. This stimulus increased muscle blood flow from 1.4 ± 0.5 to 2.3 ± 1.2 ml·100 g?1·min?1 (P < 0.05), whereas skin blood flow under the heating source increased from 0.7 ± 0.3 to 5.5 ± 1.5 ml·100 g?1·min?1 (P < 0.01). While whole body heat stress increased intestinal temperature by ～1°C, muscle blood flow in the calf that was not directly exposed to the water-perfused suit (i.e., indirect heating) did not increase during the whole body heat stress (normothermia: 1.6 ± 0.5 ml·100 g?1·min?1; heat stress: 1.7 ± 0.3 ml·100 g?1·min?1; P = 0.87). Whole body heating, however, reflexively increased calf skin blood flow (to 4.0 ± 1.5 ml·100 g?1·min?1) in the area not exposed to the water-perfused suit. These data show that local, but not indirect, heating increases calf skeletal muscle blood flow in humans. These results have important implications toward the reconsideration of previously accepted blood flow distribution during whole body heat stress.     

ICRF heating in magnetic mirror plasmas

Waves in the ion cyclotron range of frequency are efficiently used to produce and heat magnetic mirror plasmas. In relatively low-density (lower than 10¹⁸ m^?3) plasmas, the fast Alfvén eigenmodes are formed in radial and axial directions and the excitation of these modes is strongly affected by the density. The slow Alfvén waves are also effectively used for plasma heating. The ion temperature above 10 keV is achieved, which is confirmed by the detection of fusion neutrons. The excitation of Alfvén eigenmodes is studied in the GAMMA 10 tandem mirror.     

The effect of rate of heating or cooling prior to heating on tumor and normal tissue microcirculatory blood flow

Single vessel responses to hyperthermia were studied in tumor and normal tissues using a transparent access window chamber. Rates of heating less than or equal to .68 degrees C/minute preserved relatively better vascular function in normal than tumor tissue. A rate of heating of 1.0 degrees C/minute lowered normal tissue statis temperatures so they were no different from tumor. Cooling to 30 degrees C prior to heating slowed normal arteriolar flows to less than 5% of 38 degrees C controls. Heating resulted in increased flow in those vessels, but maximum flows never exceeded 5% of flows achieved in similar vessels which were not cooled first. The implications of this work are that rate of heating and cooling prior to heating can alter normal tissue vascular response to heat in a way that could prove deleterious to maintaining efficient vascular function in that tissue relative to tumor.     

ICR heating in ion separation systems

A systematic procedure for analyzing the physical processes that govern ICR heating in systems for ion separation is developed. The procedure is based on an analytic model of an rf antenna generating rf fields within a plasma column in a magnetic field and includes such issues as the calculation of rf fields, examination of the ICR interaction of ions with these fields, and determination of the distribution function of the ion flow at the exit from the ICR heating system. It is shown that, even in ICR heating systems with easily achievable parameter values, ions with appreciably different masses can be efficiently separated by energy.