Determinants of triad junction reformation: Identification and isolation of an endogenous promotor for junction reformation in sketal muscle

Summary The junction of isolated triads can be mechanically broken by passage through a French press and subsequently reformed by incubation of the isolated organelles with certain salts of weak acids (e.g., K cacodylate. K propionate, and K butyrate). In contrast, other salts (e.g., KCl, K phosphate, and K benzoate) are ineffective in promoting triad formation. An endogenous factor obtained from a muscle homogenate acts in the same manner as these artificial compounds. When rabbit skeletal muscle is homogenized in a KCl solution and centrifuged to remove large cellular components and membrane fractions, an endogenous factor is extracted into the high speed supernatant which promotes the reformation of mechanically broken triads. A three-stage purification of this factor has been achieved using: (1) ammonium sulfate fractionation, (2) adsorption chromatography, and (3) molecular sieve chromatography. SDS-PAGE showed that the protein was purified to homogeneity and had a subunitM _r of 34,000 daltons. This protein has the following characteristics: (1) it exists in 0.1m KCl as a polymeric substance with an estimatedM _r =123,000 on molecular sieve chromatography and aM _r =155,000 on sedimentation equilibrium; (2) it promotes the formation of triadic vesicles from isolated organelles in a low ionic strength medium; (3) Both this protein and cacodylate share the property of specifically catalyzing the association and aggregation of junctional proteins which had previously been dissolved by neutral detergent and salt; (4) it appears to be identical to an extrinsic constituent of terminal cisternae, which has been described as a protein ofM _r =34K. It is not clear, however, whether this protein is a necessary and integral component of the junctional feet or whether it exerts predominantly a catalytic role in the formation of the triad junction.     

Identification of a constituent of the junctional feet linking terminal cisternae to transverse tubules in skeletal muscle

This study describes the biochemical composition of junctional feet in skeletal muscle utilizing a fraction of isolated triad junctions. [3H]Ouabain entrapment was employed as a specific marker for T-tubules. The integrity of the triad junction was assayed by the isopycnic density of [3H]ouabain activity (24-30% sucrose for free T-tubules, 38- 42% sucrose for intact triads). Trypsin, chymotrypsin, and pronase all caused separation of T-tubules from terminal cisternae, indicating that the junction is composed as least in part of protein. Trypsin and chymotrypsin hydrolyzed four proteins: the Ca2+ pump, a doublet 325,000, 300,000, and an 80,000 Mr protein. T-tubules which had been labeled covalently with 125I were joined to unlabeled terminal cisternae by treatment with K cacodylate. The reformed triads were separated from free T-tubules and then severed by passage through a French press. When terminal cisternae were separated from T-tubules, some 125I label was transferred from the labeled T-tubules to the unlabeled terminal cisternae. Gel electrophoresis showed that, although T-tubules were originally labeled in a large number of different proteins, only a single protein doublet was significantly labeled in the originally unlabeled terminal cisternae. This protein pair had molecular weights of 325,000 and 300,000 daltons. Transfer of label did not occur to a substantial degree without K cacodylate treatment. We propose that the transfer of 125I label from T-tubules to terminal cisternae during reformation and breakage of the triad junction is a property of the protein which spans the gap between T-tubules and terminal cisternae.     

Morphology of isolated triads

The triad is the junctional association of transverse tubule with sarcoplasmic reticulum terminal cisternae. A procedure for the isolation of highly enriched triads from skeletal muscle has been described in the previous paper. In the present study, the structural features of isolated triads have been examined by thin-section, negative-staining, and freeze-fracture electron microscopy. In isolated triads, key features of the structure observed in situ have been retained, including the osmiophilic "feet," junctional structures between the transverse tubule and terminal cisternae. New insight into triad structure is obtained by negative staining, which also enables visualization of feet at the junctional face of the terminal cisternae, whereas smaller surface particles, characteristic of calcium pump protein, are not visualized there. Therefore, the junctional face is different from the remainder of the sarcoplasmic reticulum membrane. Junctional feet as viewed by thin section or negative staining have similar periodicity and extend approximately 100 A from the surface of the membrane. Freeze-fracture of isolated triads reveals blocklike structures associated with the membrane of the terminal cisternae at the junctional face, interjunctional connections between the terminal cisternae and t-tubule, and intragap particles. The intragap particles can be observed to be closely associated with the t-tubule. The structure of isolated triads is susceptible to osmotic and salt perturbation, and examples are given regarding differential effects on transverse tubules and terminal cisternae. Conditions that adversely affect morphology must be considered in experimentation with triads as well as in their preparation and handling.     

Identification and extraction of proteins that compose the triad junction of skeletal muscle

Treatment of both transverse tubules and terminal cisternae with a combination of Triton X-100 and hypertonic K cacodylate causes dissolution of nonjunctional proteins and selective retention of membrane fragments which are capable of junction formation. Treatment of vesicles with Triton X-100 and either KCl or K gluconate causes complete dissolution of all components. Therefore K cacodylate exerts a specific preservative action on the junctional material. The membrane fragment from treatment of transverse tubules with Triton X-100 + cacodylate contains a protein of Mr = 80,000 in SDS gel electrophoresis as the predominant protein while lipid composition is enriched in cholesterol. The membrane fragment retains in electron microscopy the trilaminar appearance of the intact vesicles. Freeze fracture of transverse tubule fragments reveals a high density of low-profile, intercalated particles, which frequently form strings or occasional small arrays. The fragments from Triton X-100 plus cacodylate treatment of terminal cisternae include the protein of Mr = 80,000 as well as the spanning protein of the triad, calsequestrin, and some minor proteins. The fragments are almost devoid of lipid and display an amorphous morphology suggesting membrane disruption. The ability of the transverse tubular fragment, which contains predominantly the Mr = 80,000 protein, to form junctions with terminal cisternae fragments suggests that it plays a role in anchoring the membrane to the junctional processes of the triad. The junctional proteins may be solubilized in a combination of nonionic detergent and hypertonic NaCl. Subsequent molecular sieve chromatography gives an enriched preparation of the spanning protein. This protein has subunits of Mr = 300,000, 270,000 and 140,000 and migrates in the gel as a protein of Mr = 1.2 X 10(6) indicating a polymeric structure.     

Further characterization of light and heavy sarcoplasmic reticulum vesicles. Identification of the ‘sarcoplasmic reticulum feet’ associated with heavy sarcoplasmic reticulum vesicles

Light and heavy sarcoplasmic reticulum vesicles were isolated from rabbit leg muscle using a combination of differential centrifugation and isophycnic zonal ultracentrifugation. Light sarcoplasmic reticulum vesicles obtained from the 30–32.5% and heavy sarcoplasmic reticulum vesicles obtained from the 38.5–42% sucrose regions of the linear sucrose gradient were determined to be free of surface and mitochondrial membrane contamination by marker enzyme analysis and electron microscopy. Thin sections of the light vesicles revealed empty vesicles of various sizes and shapes. Freeze-fracture replicas of the light vesicles showed an asymmetric distribution of intramembranous particles with the same orientation and distribution as the longitudinal sarcoplasmic reticulum in vivo. Heavy vesicles appeared as rounded vesicles of uniform size filled with electron dense material, similar to that seen in the terminal cisternae of the sarcoplasmic reticulum. The cytoplasmic surface of the membrane was decorated by membrane projections, closely resembling the ‘feet’ which join the sarcoplasmic reticulum to the transverse tubules in the intact muscle fiber. Freeze-fracture replicas of the heavy vesicles revealed an asymmetric distribution of particles which in some areas of the vesicle's surface are larger and less densely aggregated than those of the light vesicles. In the best quality replicas, some regions of the luminal leaflet were not smooth but showed evidence of pits. These structural details are characteristic of the area of sarcoplasmic reticulum membrane which is covered by the ‘feet’ in the intact muscle.Heavy vesicles contained greater than six times the calcium content of light vesicles, 54 vs. 9 nmol Ca²⁺/μl of water space. After KCl washing both contained less than 4 nmol Ca²⁺/μl of water space. Although they transported at the same rate and the same total amount of calcium, the rate of passive Ca²⁺ efflux from the heavy vesicles was double that of light vesicles. The higher rate of calcium efflux from the heavy vesicles was inhibited by dantrolene, an inhibitor of Ca²⁺ release. High resolution sodium dodecyl sulfate gel electrophoresis showed that the light vesicles contained predominantly Ca²⁺-ATPase along with several approx. 55 000-dalton proteins and a 5000-dalton proteolipid, while the heavy vesicles contained Ca²⁺-ATPase and calsequestrin along with several approx. 55 000-dalton proteins, extrinsic 34 000- and 38 000-dalton proteins, intrinsic 30 000- and 33 000-dalton proteins and two proteolipids of 5000 and 9000 daltons. KCl washing of the heavy vesicles removed both the approx. 34 000- and 38 000-dalton proteins, and the ‘sarcoplasmic reticulum feet’ were no longer seen on the heavy vesicles. The KCl supernatant was enriched in the 34 000- and 38 000-dalton proteins, indicating that these proteins are possible components of the sarcoplasmic reticulum feet. The biochemical and morphological data strongly support the view that the light vesicles are derived from the longitudinal sarcoplasmic reticulum and that the heavy vesicles are derived from the terminal cisternae containing junctional sarcoplasmic reticulum membrane with the intact ‘sarcoplasmic reticulum feet’.     

Preparation and morphology of sarcoplasmic reticulum terminal cisternae from rabbit skeletal muscle

We have developed a procedure to isolate, from skeletal muscle, enriched terminal cisternae of sarcoplasmic reticulum (SR), which retain morphologically intact junctional "feet" structures similar to those observed in situ. The fraction is largely devoid of transverse tubule, plasma membrane, mitochondria, triads (transverse tubules junctionally associated with terminal cisternae), and longitudinal cisternae, as shown by thin-section electron microscopy of representative samples. The terminal cisternae vesicles have distinctive morphological characteristics that differ from the isolated longitudinal cisternae (light SR) obtained from the same gradient. The terminal cisternae consist of two distinct types of membranes, i.e., the junctional face membrane and the Ca2+ pump protein-containing membrane, whereas the longitudinal cisternae contain only the Ca2+ pump protein-containing membrane. The junctional face membrane of the terminal cisternae contains feet structures that extend approximately 12 nm from the membrane surface and can be clearly visualized in thin section through using tannic acid enhancement, by negative staining and by freeze-fracture electron microscopy. Sections of the terminal cisternae, cut tangential to and intersecting the plane of the junctional face, reveal a checkerboardlike lattice of alternating, square-shaped feet structures and spaces each 20 nm square. Structures characteristic of the Ca2+ pump protein are not observed between the feet at the junctional face membrane, either in thin section or by negative staining, even though the Ca2+ pump protein is observed in the nonjunctional membrane on the remainder of the same vesicle. Likewise, freeze-fracture replicas reveal regions of the P face containing ropelike strands instead of the high density of the 7-8-nm particles referable to the Ca2+ pump protein. The intravesicular content of the terminal cisternae, mostly Ca2+-binding protein (calsequestrin), is organized in the form of strands, sometimes appearing paracrystalline, and attached to the inner face of the membrane in the vicinity of the junctional feet. The terminal cisternae preparation is distinct from previously described heavy SR fractions in that it contains the highest percentage of junctional face membrane with morphologically well-preserved junctional feet structures.     

Purification of the ryanodine receptor and identity with feet structures of junctional terminal cisternae of sarcoplasmic reticulum from fast skeletal muscle

The ryanodine receptor has been purified from junctional terminal cisternae of fast skeletal muscle sarcoplasmic reticulum (SR). The ryanodine receptor was solubilized with 3-[(3-cholamidopropyl)dimethylammonio]-1-propanesulfonate (CHAPS) and stabilized by addition of phospholipids. The solubilized receptor showed the same [3H]ryanodine binding properties as the original SR vesicles in terms of affinity, Ca2+ dependence, and salt dependence. Purification of the ryanodine receptor was performed by sequential column chromatography on heparin-agarose and hydroxylapatite in the presence of CHAPS. The purified receptor bound 393 +/- 65 pmol of ryanodine/mg of protein (mean +/- S.E., n = 5). The purified receptor showed three bands on sodium dodecyl sulfate-polyacrylamide gel electrophoresis with Mr of 360,000, 330,000, and 175,000. Densitometry indicates that these are present in the ratio of 2/1/1, suggesting a monomer Mr of 1.225 X 10(6) and supported by gel exclusion chromatography in CHAPS. Electron microscopy of the purified preparation showed the square shape of 210 A characteristic of and comparable in size and shape to the feet structures of junctional terminal cisternae of SR, indicating that ryanodine binds directly to the feet structures. From the ryanodine binding data, the stoichiometry between ryanodine binding sites to the number of feet structures is estimated to be about 2. Since the ryanodine receptor is coupled to Ca2+ gating, the present finding suggests that the ryanodine receptor and Ca2+ release channel represent a functional unit, the structural unit being the foot structure which, in situ, is junctionally associated with the transverse tubules. It is across this triad junction that the signal for Ca2+ release is expressed. Thus, the foot structure appears to directly respond to the signal from transverse tubules, causing the release of Ca2+ from the junctional face membrane of the terminal cisternae of SR.     

Antibodies to junctional sarcoplasmic reticulum proteins: probes for the Ca2+-release channel.

The junctional face membrane plays a key role in excitation-contraction coupling in skeletal muscle. A protein of 350 kDa, tentatively identified as a component of the junctional feet, connects transverse tubules to terminal cisternae of sarcoplasmic reticulum [Kawamoto, Brunschwig, Kim & Caswell (1986) J. Cell Biol. 103, 1405-1414]. The membrane topology and protein composition of sarcoplasmic reticulum Ca2+-release channels of rabbit skeletal muscle were investigated using an immunological approach, with anti-(junctional face membrane) and anti-(350 kDa protein) polyclonal antibodies. Upon preincubation of the terminal cisternae with anti-(junctional face membrane) antibodies, Ca2+-ATPase and Ca2+-loading activities were not affected, whereas anti-(350 kDa protein) antibodies stimulated Ca2+-ATPase activity by 25% and inhibited Ca2+-loading activity by 50% (at an antibody/terminal cisternae protein ratio of 1:1). Specific photolabelling of terminal cisternae proteins with [14C]doxorubicin was prevented by both anti-(junctional face membrane) and anti-(350 kDa protein) antibodies. Stimulation of Ca2+ release by doxorubicin was prevented by both anti-(junctional face membrane) and anti-(350 kDa protein) antibodies. Half-maximal inhibition was obtained at an antibody/terminal cisternae protein ratio of 1:1. Kinetic measurements of Ca2+ release indicated that anti-(350 kDa protein) antibodies prevented Ca2+-induced Ca2+ release, whereas the ATP-stimulation and the inhibition by Mg2+ were not affected. These results suggest that: (i) Ca2+- and doxorubicin-induced Ca2+ release is mediated by Ca2+ channels which are selectively localized in the junctional face membrane; (ii) the 350 kDa protein is a component of the Ca2+-release channel in native terminal cisternae vesicles; and (iii) the Ca2+-activating site of the channel is separate from other allosteric sites.     

STUDIES OF THE TRIAD : II. Penetration of Tracers into the Junctional Gap

Ferritin and Imferon molecules were introduced as tracers inside "skinned" muscle fibers to test which part of the triadic junction gap is freely exchangeable with the sarcoplasm. At least 50% of the T-system surface is freely accessible from the sarcoplasm. Of the remainder, 30% of the total T-system surface is covered by the junctional feet, and 20% in the center of the junction may or may not be accessible. The possibility is discussed that the triadic junction may not function as an electrical coupling.     

Evidence for the association of dystrophin with the transverse tubular system in skeletal muscle

Polyclonal antibodies to dystrophin (the protein product of the human Duchenne muscular dystrophy gene) were used to identify and characterize dystrophin in isolated triads from rabbit skeletal muscle. Anti-dystrophin antibodies recognize an approximately 400,000-Da protein in isolated triads or heavy microsomes from skeletal muscle. Treatment of heavy microsomes with buffers containing high salt or EDTA to remove peripheral or extrinsic membrane proteins does not remove dystrophin; however, treatment of intact triads with trypsin shows that dystrophin is extremely sensitive to mild proteolytic digestion. Isolation of junctional complexes from skeletal muscle triads indicates that dystrophin is tightly associated with the triadic junction. Fractionation of the triadic junction into junctional transverse tubular membranes and junctional sarcoplasmic reticulum membranes has shown that dystrophin is enriched in junctional transverse tubular membranes. Thus, our results suggest that dystrophin is a component of the triad junction which is exposed to the cytoplasm and embedded in or attached to the transverse tubular membrane.     

Identification and purification of a transverse tubule coupling protein which binds to the ryanodine receptor of terminal cisternae at the triad junction in skeletal muscle

In fast twitch skeletal muscle, the signal for excitation-contraction coupling is transferred from transverse tubule across the triad junction; calcium is thereby released from the terminal cisternae of sarcoplasmic reticulum triggering muscle contraction. Recently, the feet structures of terminal cisternae, which bridge the gap at the triad junction, have been identified as the ryanodine receptor and in turn with the calcium release channels of sarcoplasmic reticulum. The latter consists of an oligomer of a single high molecular weight polypeptide (Mr 360,000). This study attempts to identify the component in the transverse tubule which ligands with the foot structure to form the triad junction. The purified ryanodine receptor, derivatized with sulfosuccinimidyl-2-(p-azidosalicylimido)-1,3'-dithiopropionate (SASD), a thiol-cleavable, 125I-iodinatable, and photoactive probe, was shown to selectively cross-link to a protein with Mr of 71,000 in isolated transverse tubules. This coupling protein was purified from transverse tubule by solubilization with the detergent 3-[(3-cholamidopropyl)dimethylammonio]-1-propane sulfonate (CHAPS) and then purified by sequential column chromatography. In the absence of sulfhydryl agents, the purified polypeptide has an Mr of 61,000 on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. A complementary approach using SASD was employed to confirm association of the coupling protein with the ryanodine receptor of terminal cisternae. We conclude that the transverse tubule coupling protein together with the ryanodine receptor (foot structure) is involved in the liganding between transverse tubule and terminal cisternae of sacroplasmic reticulum.     

Identification of a new subpopulation of triad junctions isolated from skeletal muscle; Morphological correlations with intact muscle

Summary It has been previously recognized that a number of protocols may cause breakage of the triad junction and separation of the constituent organelles of skeletal muscle. We now describe a fraction of triad junctions which is refractory to the known protocols for disruption. Triads were passed through a French press and the dissociated organelles were separated on a sucrose density gradient, which was assayed for PN200-110, ouabain and ryanodine binding. Ryanodine binding showed a single peak at the density of heavy terminal cisternae. On the other hand, the PN200-110 and ouabain, which are external membrane ligands, bound in two peaks: one at the free transverse tubule region and the other at the light terminal cisternae. Similarly, a two peak pattern of PN200-110 and ouabain binding was observed when triad junctions were broken by the Ca²⁺-dependent protease, calpain, which selectively hydrolyzes the junctional foot protein. The light terminal cisternae vesicles were subjected to three different procedures of junctional breakage: French press, hypertonic salt treatment, and protease digestion using calpain or trypsin. The treated membranes were then centrifuged on density gradients. Only extensive trypsin digestion caused a partial shift of ouabain activity into the free transverse tubule region. These observations suggest that the triads are a composite mixture of breakage susceptible, weak, and breakage resistant, strong, triads. Scatchard analysis of PN200-110 suggests that the transverse tubules of strong triads contain a relatively high number of dihydropyridine receptors compared to those of weak triads. Thin section electron microscopic images of the strong triads comparable to those of intact muscle are presented.     

Clathrin and Cx43 gap junction plaque endoexocytosis

In earlier transmission electron microscopic studies, we have described pentilaminar gap junctional membrane invaginations and annular gap junction vesicles coated with short, electron-dense bristles. The similarity between these electron-dense bristles and the material surrounding clathrin-coated pits led us to suggest that the dense bristles associated with gap junction structures might be clathrin. To confirm that clathrin is indeed associated with annular gap junction vesicles and gap junction plaques, quantum dot immuno-electron microscopic techniques were used. We report here that clathrin associates with both connexin 43 (Cx43) gap junction plaques and pentilaminar gap junction vesicles. An important finding was the preferential localization of clathrin to the cytoplasmic surface of the annular or of the gap junction plaque membrane of one of the two contacting cells. This is consistent with the possibility that the direction of gap junction plaque internalization into one of two contacting cells is regulated by clathrin.     

Indentations in the terminal cisternae of amphibian and mammalian skeletal muscle fibers

Indentations (hillocks and dimples) in the terminal cisternae of mammalian and amphibian skeletal muscle fibers were studied using freeze-fracture and serial thin-section techniques. The structures were seen in all muscles and had a regular separation from each other and from the T-tubule. Indentations were smaller than fenestrations and formed concavities in, but not macromolecular pores through, the terminal cisternae. The average numbers of indentations in rat muscles (measured along the length of the terminal cisternae, within 150 nm of the triadic junction) varied from 0.9 per micrometer in soleus fibers to 9.6 per micrometer in posterior cricoarytenoid fibers. The average numbers in amphibian sartorius fibers varied from 1.6 to 3.6 per micrometer in muscles from different species. The regular alignment of the indentations along the triad, as well as a close correlation between their numbers and the contractile properties of the muscle, suggest that they function in contractile activation and may represent sites of calcium release from the terminal cisternae.     

A silver-reducing component in rat striated muscle. II. Isolated sarcoplasmic reticulum vesicles

In previous work on rat striated muscle cells a silver-reducing component was found selectively localized at the terminal cistern/transverse tubule system (Tandler and Pellegrino de Iraldi 1989). To further investigate that problem we performed the Hg-Ag argentaffin reaction on a sarcoplasmic reticulum fraction from rat skeletal muscle. Circular profiles corresponding to vesicular structures were found outlined by silver grains. The number of silver "stained" vesicles were less than the total number vesicles stained by conventional procedures. The correlation between argentaffinities in the intact muscle fiber and their subcellular organelles indicated that the Hg-Ag reactive vesicles must be those derived from the terminal cisternae of the sarcoplasmic reticulum. The silver-reducing constituent aggregates in the presence of 1 mM CaCl2 or 0.5 M K cacodylate. The state of aggregation induced by Ca2+ was not affected by incubation with 0.5% Triton X-100 or by 2 mM EDTA, thus suggesting a localization at or near the membrane of the terminal cistern vesicle facing the junctional gap. In Laemmli SDS-acrylamide gels the Hg-Ag reaction stained all proteins in a manner similar to Coomasie blue. It is suggested that the selective histochemical staining is the result of differential reactivities due to steric requirements of the chemical reaction.     

A genetic model for the study of abnormal nerve-muscle interactions at the level of excitation-contraction coupling: the mutation muscular dysgenesis

Excitation-contraction in muscle fibers are coupled through a complex mechanism involving multiproteic components located at a specialized cellular site, the triadic junction. Triads in normal muscle fiber result from the apposition of sarcoplasmic reticulum citernae and T-tubule and possess strikingly organized ultrastructural elements, bridging both types of membranes, the "junctional feet". Muscular dysgenesis in the mouse is characterized by total muscle inactivity in the developing skeletal muscles due to excitation-contraction uncoupling. Triads have been found to be disorganized with no "junctional feet" and dihydropyridine (DHP) binding sites are decreased with no slow Ca2+ currents, suggesting a basic defect in the excitation-contraction coupling machinery itself. We may hypothesize that muscular dysgenesis results in a marked defect in a functional protein involved in the morphogenesis of the triad and/or directly involved in Ca2+ release for contraction.     

Bridging structures spanning the junctioning gap at the triad of skeletal muscle

The membrane systems of skeletal muscle were examined after tannic acid fixation. A new structure consisting of bridges spanning the junctional gap is described, and a model is proposed in which the cytoplasmic but not the luminal membrane leaflets of the transverse tubule and of the junctional sarcoplasmic reticulum (SR) are continuous. The globular particles (presumably the Ca-binding proteins) within the terminal cisternae were arranged in longitudinal rows and appeared adherent to the junctional membrane. The junctional gap was present in negatively stained, frozen thin sections of fixed muscles. Negatively staining material occured within the junctional gap. The cytoplasmic leaflets of the longitudinal, intermediate, and terminal cisterna regions of the SR exhibited a thick coat of densely staining material compatible with the presence of the Ca-ATPase. Similar bridges were also observed at the surface membrane-SR close coupling sites of vascular smooth muscle.     

Evidence for the participation of actin microfilaments and bristle coats in the internalization of gap junction membrane

Thin sections of rabbit granulosa, human SW-13 adrenal cortical adenocarcinoma, and mouse B-16 melanoma cells revealed an apparent single-layered basket of 4- to 7-nm filaments surrounding cytoplasmic gap junction vesicles. This interpretation was based upon apparent longitudinal, cross, and en face sections of structures surrounding the vesicle profiles in tissue treated with tannic acid-glutaraldehyde. In granulosa cells incubated with the S-1 fragment of heavy meromyosin, arrowhead-decorated filaments were observed at the periphery of the gap junction vesicles, suggesting that these filaments contained actin. In addition, we found that small gap junctional blebs and vesicles at the cell surface were coated with short electron-dense bristles similar in appearance to the cloathrin-containing coat of coated vesicles of nonjunctional membrane. The role of these and other cytoskeletal elements in the possible endocytosis of gap junction membrane is discussed.     

The structure of calsequestrin in triads of vertebrate skeletal muscle: a deep-etch study

We have examined the structure of calsequestrin in three-dimensional images from deep-etched rotary-replicated freeze fractures of skeletal muscle fibers. We selected a fast-acting muscle because the sarcoplasmic reticulum has an orderly disposition and is rich in internal membranes. Calsequestrin forms a network in the center of the terminal cisternae and is anchored to the sarcoplasmic reticulum membrane, with preference for the junctional portion. The anchorage is responsible for maintaining calsequestrin in the region of the sarcoplasmic reticulum close to the calcium-release channels, and it corroborates the finding that calsequestrin and the spanning protein of the junctional feet may interact with each other in the junctional membrane. Anchoring filaments may be composed of a protein other than calsequestrin.     

The unraveling architecture of the junctional sarcoplasmic reticulum

The sarcoplasmic reticulum (SR) of skeletal muscle controls the contraction-relaxation cycle by raising and lowering the myoplasmic free-Ca²⁺ concentration. The coupling between excitation, i.e., depolarization of sarcolemma and transvers tubule (TT) and Ca²⁺ release from the terminal cisternae (TC) of SR takes place at the triad. The triad junction is formed by a specialized region of the TC, the junctional SR, and the TT. The molecular architecture and protein composition of the junctional SR are under active investigation. Since the junctional SR plays a central role in excitation-contraction coupling and Ca²⁺ release, some of its protein constituents are directly involved in these processes. The biochemical evidence supporting this contention is reviewed in this article.