Requirement of fibroblast growth factor signaling for regeneration of epiphyseal morphology in rabbit full-thickness defects of articular cartilage

The involvement of fibroblast growth factor-2 (FGF-2) during the repair process in rabbit full-thickness defects of articular cartilage was studied. Fibroblast growth factor-2 (50 pg/h) was administered for 2 weeks in a 5mm defect of articular cartilage, which is large enough not to repair spontaneously. The administration of FGF-2 resulted in the regeneration of the articular cartilage and the subchondral bone within 8 weeks. In these defects, undifferentiated mesenchymal cells initiated chondrogenic differentiation coupled with replacement by subchondral bone, resulting in the resurfacing of the defects with hyaline cartilage and the recovery of subchondral bone up to the original bone–articular cartilage junction. In rabbits, full-thickness defects are capable of regenerating articular cartilage as long as the defect size is limited to ≤3 mm in diameter. In the defects, strong immunoreactivity for FGF-2 was observed in the granulation tissue filling the defects in the early stage of repair, in association with the expression of FGF-2 mRNA shown by in situ hybridization. Once the undifferentiated mesenchymal cells had differentiated into chondrocytes, both the immunoreactivity and the in situ hybridization signal declined significantly. Upon the local administration of a monoclonal antibody against FGF-2 (bFM-1, 50ng/h), the defects were filled with fibrous tissue and no resurfacing hyaline cartilage was formed. Compared to the non-treated defects, there were marked increases in FGF-2 immunoreactivity and the overexpression of FGF-2 mRNA in the reparative tissue in the bFM-1 -treated defects. This rebound phenomenon indicates that the autocrine FGF-2 signaling is critically important for the regeneration of articular cartilage.     

Effect of a mechanical stimulation bioreactor on tissue engineered, scaffold-free cartilage

Achieving sufficient functional properties prior to implantation remains a significant challenge for the development of tissue engineered cartilage. Many studies have shown chondrocytes respond well to various mechanical stimuli, resulting in the development of bioreactors capable of transmitting forces to articular cartilage in vitro. In this study, we describe the production of sizeable, tissue engineered cartilage using a novel scaffold-free approach, and determine the effect of perfusion and mechanical stimulation from a C9-x Cartigen bioreactor on the properties of the tissue engineered cartilage. We created sizable tissue engineered cartilage from porcine chondrocytes using a scaffold-free approach by centrifuging a high-density chondrocyte cell-suspension onto an agarose layer in a 50 mL tube. The gross and histological appearances, biochemical content, and mechanical properties of constructs cultured in the bioreactor for 4 weeks were compared to constructs cultured statically. Mechanical properties were determined from unconfined uniaxial compression tests. Constructs cultured in the bioreactor exhibited an increase in total GAG content, equilibrium compressive modulus, and dynamic modulus versus static constructs. Our study demonstrates the C9-x CartiGen bioreactor is able to enhance the biomechanical and biochemical properties of scaffold-free tissue engineered cartilage; however, no additional enhancement was seen between loaded and perfused groups.     

Major biological obstacles for persistent cell-based regeneration of articular cartilage

Hyaline articular cartilage, the load-bearing tissue of the joint, has very limited repair and regeneration capacities. The lack of efficient treatment modalities for large chondral defects has motivated attempts to engineer cartilage constructs in vitro by combining cells, scaffold materials and environmental factors, including growth factors, signaling molecules, and physical influences. Despite promising experimental approaches, however, none of the current cartilage repair strategies has generated long lasting hyaline cartilage replacement tissue that meets the functional demands placed upon this tissue in vivo. The reasons for this are diverse and can ultimately result in matrix degradation, differentiation or integration insufficiencies, or loss of the transplanted cells and tissues. This article aims to systematically review the different causes that lead to these impairments, including the lack of appropriate differentiation factors, hypertrophy, senescence, apoptosis, necrosis, inflammation, and mechanical stress. The current conceptual basis of the major biological obstacles for persistent cell-based regeneration of articular cartilage is discussed, as well as future trends to overcome these limitations.     

Matrix-assisted Autologous Chondrocyte Transplantation for Remodeling and Repair of Chondral Defects in a Rabbit Model

Articular cartilage defects are considered a major health problem because articular cartilage has a limited capacity for self-regeneration ¹. Untreated cartilage lesions lead to ongoing pain, negatively affect the quality of life and predispose for osteoarthritis. During the last decades, several surgical techniques have been developed to treat such lesions. However, until now it was not possible to achieve a full repair in terms of covering the defect with hyaline articular cartilage or of providing satisfactory long-term recovery ^2-4. Therefore, articular cartilage injuries remain a prime target for regenerative techniques such as Tissue Engineering. In contrast to other surgical techniques, which often lead to the formation of fibrous or fibrocartilaginous tissue, Tissue Engineering aims at fully restoring the complex structure and properties of the original articular cartilage by using the chondrogenic potential of transplanted cells. Recent developments opened up promising possibilities for regenerative cartilage therapies.The first cell based approach for the treatment of full-thickness cartilage or osteochondral lesions was performed in 1994 by Lars Peterson and Mats Brittberg who pioneered clinical autologous chondrocyte implantation (ACI) ⁵. Today, the technique is clinically well-established for the treatment of large hyaline cartilage defects of the knee, maintaining good clinical results even 10 to 20 years after implantation ⁶. In recent years, the implantation of autologous chondrocytes underwent a rapid progression. The use of an artificial three-dimensional collagen-matrix on which cells are subsequently replanted became more and more popular ^7-9.MACT comprises of two surgical procedures: First, in order to collect chondrocytes, a cartilage biopsy needs to be performed from a non weight-bearing cartilage area of the knee joint. Then, chondrocytes are being extracted, purified and expanded to a sufficient cell number in vitro. Chondrocytes are then seeded onto a three-dimensional matrix and can subsequently be re-implanted. When preparing a tissue-engineered implant, proliferation rate and differentiation capacity are crucial for a successful tissue regeneration ¹⁰. The use of a three-dimensional matrix as a cell carrier is thought to support these cellular characteristics ¹¹.The following protocol will summarize and demonstrate a technique for the isolation of chondrocytes from cartilage biopsies, their proliferation in vitro and their seeding onto a 3D-matrix (Chondro-Gide, Geistlich Biomaterials, Wollhusen, Switzerland). Finally, the implantation of the cell-matrix-constructs into artificially created chondral defects of a rabbit''s knee joint will be described. This technique can be used as an experimental setting for further experiments of cartilage repair.     

A modular approach to creating large engineered cartilage surfaces

Native articular cartilage has limited capacity to repair itself from focal defects or osteoarthritis. Tissue engineering has provided a promising biological treatment strategy that is currently being evaluated in clinical trials. However, current approaches in translating these techniques to developing large engineered tissues remains a significant challenge. In this study, we present a method for developing large-scale engineered cartilage surfaces through modular fabrication. Modular Engineered Tissue Surfaces (METS) uses the well-known, but largely under-utilized self-adhesion properties of de novo tissue to create large scaffolds with nutrient channels. Compressive mechanical properties were evaluated throughout METS specimens, and the tensile mechanical strength of the bonds between attached constructs was evaluated over time. Raman spectroscopy, biochemical assays, and histology were performed to investigate matrix distribution. Results showed that by Day 14, stable connections had formed between the constructs in the METS samples. By Day 21, bonds were robust enough to form a rigid sheet and continued to increase in size and strength over time. Compressive mechanical properties and glycosaminoglycan (GAG) content of METS and individual constructs increased significantly over time. The METS technique builds on established tissue engineering accomplishments of developing constructs with GAG composition and compressive properties approaching native cartilage. This study demonstrated that modular fabrication is a viable technique for creating large-scale engineered cartilage, which can be broadly applied to many tissue engineering applications and construct geometries.     

Treatment of Osteochondral Defects in the Rabbit's Knee Joint by Implantation of Allogeneic Mesenchymal Stem Cells in Fibrin Clots

The treatment of osteochondral articular defects has been challenging physicians for many years. The better understanding of interactions of articular cartilage and subchondral bone in recent years led to increased attention to restoration of the entire osteochondral unit. In comparison to chondral lesions the regeneration of osteochondral defects is much more complex and a far greater surgical and therapeutic challenge. The damaged tissue does not only include the superficial cartilage layer but also the subchondral bone. For deep, osteochondral damage, as it occurs for example with osteochondrosis dissecans, the full thickness of the defect needs to be replaced to restore the joint surface ¹. Eligible therapeutic procedures have to consider these two different tissues with their different intrinsic healing potential ². In the last decades, several surgical treatment options have emerged and have already been clinically established ^3-6.Autologous or allogeneic osteochondral transplants consist of articular cartilage and subchondral bone and allow the replacement of the entire osteochondral unit. The defects are filled with cylindrical osteochondral grafts that aim to provide a congruent hyaline cartilage covered surface ^3,7,8. Disadvantages are the limited amount of available grafts, donor site morbidity (for autologous transplants) and the incongruence of the surface; thereby the application of this method is especially limited for large defects.New approaches in the field of tissue engineering opened up promising possibilities for regenerative osteochondral therapy. The implantation of autologous chondrocytes marked the first cell based biological approach for the treatment of full-thickness cartilage lesions and is now worldwide established with good clinical results even 10 to 20 years after implantation ^9,10. However, to date, this technique is not suitable for the treatment of all types of lesions such as deep defects involving the subchondral bone ¹¹.The sandwich-technique combines bone grafting with current approaches in Tissue Engineering ^5,6. This combination seems to be able to overcome the limitations seen in osteochondral grafts alone. After autologous bone grafting to the subchondral defect area, a membrane seeded with autologous chondrocytes is sutured above and facilitates to match the topology of the graft with the injured site. Of course, the previous bone reconstruction needs additional surgical time and often even an additional surgery. Moreover, to date, long-term data is missing ¹².Tissue Engineering without additional bone grafting aims to restore the complex structure and properties of native articular cartilage by chondrogenic and osteogenic potential of the transplanted cells. However, again, it is usually only the cartilage tissue that is more or less regenerated. Additional osteochondral damage needs a specific further treatment. In order to achieve a regeneration of the multilayered structure of osteochondral defects, three-dimensional tissue engineered products seeded with autologous/allogeneic cells might provide a good regeneration capacity ¹¹.Beside autologous chondrocytes, mesenchymal stem cells (MSC) seem to be an attractive alternative for the development of a full-thickness cartilage tissue. In numerous preclinical in vitro and in vivo studies, mesenchymal stem cells have displayed excellent tissue regeneration potential ^13,14. The important advantage of mesenchymal stem cells especially for the treatment of osteochondral defects is that they have the capacity to differentiate in osteocytes as well as chondrocytes. Therefore, they potentially allow a multilayered regeneration of the defect.In recent years, several scaffolds with osteochondral regenerative potential have therefore been developed and evaluated with promising preliminary results ^1,15-18. Furthermore, fibrin glue as a cell carrier became one of the preferred techniques in experimental cartilage repair and has already successfully been used in several animal studies ^19-21 and even first human trials ²².The following protocol will demonstrate an experimental technique for isolating mesenchymal stem cells from a rabbit''s bone marrow, for subsequent proliferation in cell culture and for preparing a standardized in vitro-model for fibrin-cell-clots. Finally, a technique for the implantation of pre-established fibrin-cell-clots into artificial osteochondral defects of the rabbit''s knee joint will be described.     

Long-term results of deep defects in articular cartilage. A scanning electron microscope study.

Core defects produced in the medial femoral condyle of the rabbit were studied by scanning electron microscopy and light microscopy over a period of 2 years. In some cases the defect was filled by hyaline articular cartilage with a fairly smooth surface, but in others the tissue was markedly fibrillated and resembled fibrous tissue and fibrocartilage. Appearances suggesting disintegration of the newly formed cartilage were seen in some cases. It would appear that a continuation of this process can lead to the exposure of subchondral bone. In one instance no repair tissue or new cartilage could be identified but the surrounding old cartilage had formed a shelf over the defect. The cartilage surrounding the defect was either normal or showed superficial fibrillation, and/or flow formation, and/or fissures.     

自体软骨细胞移植技术治疗膝关节软骨缺损的研究进展

膝关节软骨缺损发病率高,且自身修复能力有限。治疗膝关节软骨缺损的传统方法包括钻孔术、微骨折术、自体骨软骨移植术。然而,钻孔术和微骨折术治疗后缺损区生成的是纤维软骨,而不是正常的透明软骨,两者在力学强度、硬度、耐磨损性等多方面存在很大差距。自体骨软骨移植术可生成正常的透明软骨,但存在供体有限、不适合进行大面积软骨缺损治疗等多方面缺点在临床方面应用受限。近年来,自体软骨细胞移植技术发展迅速,越来越多的病人接受此治疗方法并获得良好效果,引起人们广泛关注。本文根据近年来国内外的各项相关研究成果进行总结,阐述膝关节软骨缺损的各种治疗方法,着重介绍自体软骨细胞移植技术。第三代自体软骨细胞移植技术生成的软骨以透明软骨为主,符合关节生物力学要求,且避免了第一代、第二代自体软骨细胞移植的术后并发症,成为治疗膝关节大面积软骨缺损安全有效的治疗方法。另外,本文就软骨细胞支架材料的发展、移植物术后的转归等问题提出进一步设想。     

Fluid-induced low shear stress improves cartilage like tissue fabrication by encapsulating chondrocytes

In the recent years, there has been considerable development in the regenerative medicine, which aims to repair, regenerate, and improve injured articular cartilage. The aim of the present study was to investigate the effect of flow-induced shear stress in perfusion bioreactor on alginate encapsulating chondrocytes. The shear stress imposed on the cells in the culture chamber of bioreactor was predicted with computational fluid dynamic. Bovine nasal chondrocytes were isolated and expanded to obtain a pellet. The cell pellet was resuspends in alginate solution, transferred to the culture chamber, and dynamically cultured under direct perfusion. At the end of culture, tissue constructs were examined histologically and by immunohistochemistry. The results of computational fluid dynamic modeling revealed that maximum wall shear stress was 4.820 × 10^?3 Pascal. Macroscopic views of the alginate/chondrocyte beads suggested that it possessed constant shape but were flexible. Under inverted microscope, round shape of chondrocyte observed. Cell distribution was homogeneous throughout the scaffold. Tissue construct subjected to shear showed morphological features, which are characteristic for natural cartilage. Immunohistochemistry results revealed immunopositivity for type II collagens in tissue constructs samples. Flow induced shear stress in the perfusion bioreactor and chnondrocyte encapsulation provide environment to support cell growth, and tissue regeneration and improve cartilage like tissue fabrication.     

Gene therapy for cartilage defects

Focal defects of articular cartilage are an unsolved problem in clinical orthopaedics. These lesions do not heal spontaneously and no treatment leads to complete and durable cartilage regeneration. Although the concept of gene therapy for cartilage damage appears elegant and straightforward, current research indicates that an adaptation of gene transfer techniques to the problem of a circumscribed cartilage defect is required in order to successfully implement this approach. In particular, the localised delivery into the defect of therapeutic gene constructs is desirable. Current strategies aim at inducing chondrogenic pathways in the repair tissue that fills such defects. These include the stimulation of chondrocyte proliferation, maturation, and matrix synthesis via direct or cell transplantation-mediated approaches. Among the most studied candidates, polypeptide growth factors have shown promise to enhance the structural quality of the repair tissue. A better understanding of the basic scientific aspects of cartilage defect repair, together with the identification of additional molecular targets and the development of improved gene-delivery techniques, may allow a clinical translation of gene therapy for cartilage defects. The first experimental steps provide reason for cautious optimism.     

骨碎补结合组织工程软骨促进软骨再生的实验研究

目的:评估骨碎补结合组织工程软骨治疗对实验兔软骨缺陷模型软骨再生的疗效。方法:将h IGF-1基因转染MSCs,并与脱细胞真皮基质(ADM)构建组织工程软骨。24只新西兰白兔随机分为A、B、C、D四组,A、C组进行自体软骨移植,B、D组进行改建的细胞-ADM移植。C、D组用40%骨碎补汤喂养4周,150 m L/d。第12周处死实验动物,分离缺损关节软骨部位,蜡块包埋染色,通过总体形态评价软骨再生组织。采用组织学评分评估再生软骨质量。采用甲苯胺蓝染色评价缺损部位产生软骨糖胺聚糖的情况。结果:与B组比较,C组和D组的新生软骨覆盖度、新骨髓的颜色、缺损边缘和表面粗糙度均显著提高(P0.05);再生软骨的组织学评分软骨表面评分显著改善(P0.05)。C组与D组具有比其他组更好的基质、细胞分布和表面指数。并且有较厚的透明样软骨组织,具有正常的糖胺聚糖产生。表明该治疗方法可以通过再生透明样软骨且没有不良事件来减少软骨缺陷。结论:工程软骨结合骨碎补治疗可显著改善兔膝关节软骨缺损修复的质量,为临床治疗软骨病变提供重要理论依据。     

Doublecortin is expressed in articular chondrocytes

Articular cartilage and cartilage in the embryonic cartilaginous anlagen and growth plates are both hyaline cartilages. In this study, we found that doublecortin (DCX) was expressed in articular chondrocytes but not in chondrocytes from the cartilaginous anlagen or growth plates. DCX was expressed by the cells in the chondrogenous layers but not intermediate layer of joint interzone. Furthermore, the synovium and cruciate ligaments were DCX-negative. DCX-positive chondrocytes were very rare in tissue engineered cartilage derived from in vitro pellet culture of rat chondrosarcoma, ATDC5, and C3H10T1/2 cells. However, the new hyaline cartilage formed in rabbit knee defect contained mostly DCX-positive chondrocytes. Our results demonstrate that DCX can be used as a marker to distinguish articular chondrocytes from other chondrocytes and to evaluate the quality of tissue engineered or regenerated cartilage in terms of their "articular" or "non-articular" nature.     

Treatment of cartilage defects by Low-intensity pulsed ultrasound in a sheep model

Aim of this study was to evaluate effects of Low-intensity pulsed ultrasound on repair of articular cartilage defects. Low-intensity pulsed ultrasound (Lipus) can induce the differentiation and activation of chondrocytes. This study was designed to evaluate the effect of Lipus on articular cartilage defects in a sheep. Eight sheep were divided in to two groups. The animals received bilateraly, articular cartilage defects 4 mm in diameter and 2 mm in deep on the patellar groove and experimental groups were treated with intensity 200 mW/cm², 20 min/day with low-intensity pulsed ultrasound for 2 month. Then both knee joints underwent surgery for remove of formed tissue sample from defects.The samples were evaluated by Quantitative real-time polymerase chain reaction (qRT-PCR), Safranin-o staining, Immunofluorescence Staining and Morphological characterization. The best and worst sample per group according to Macroscopic and micriscopic scoring were icentified. The results showed that the operated groups with-Lipus-treatment and without-Lipus treatment had considered statistically significant. Gross photography revealed that the defects in experimental groups were filled with proliferative tissue, while in control groups, a thin layer of proliferative tissue was formed in defects. qRT-PCR results showed the expression of coll2, sox9, aggrecan and Osteocalcin in experimental groups. Intense safranin-O staining show the formation cartilage tissue in ultrasound treated group, while loose safranin-o-staining were observed at the control groups. Immunofluorescence staining showed the type 2 Collagen protein expression. We suggest that low-intensity pulsed ultrasound provide the mechanistic basis force for articular cartilage repair and effective treatment modality for improving of articular cartilage defects.

     

Identification and clonal characterisation of a progenitor cell sub-population in normal human articular cartilage

Background

Articular cartilage displays a poor repair capacity. The aim of cell-based therapies for cartilage defects is to repair damaged joint surfaces with a functional replacement tissue. Currently, chondrocytes removed from a healthy region of the cartilage are used but they are unable to retain their phenotype in expanded culture. The resulting repair tissue is fibrocartilaginous rather than hyaline, potentially compromising long-term repair. Mesenchymal stem cells, particularly bone marrow stromal cells (BMSC), are of interest for cartilage repair due to their inherent replicative potential. However, chondrocyte differentiated BMSCs display an endochondral phenotype, that is, can terminally differentiate and form a calcified matrix, leading to failure in long-term defect repair. Here, we investigate the isolation and characterisation of a human cartilage progenitor population that is resident within permanent adult articular cartilage.

Methods and Findings

Human articular cartilage samples were digested and clonal populations isolated using a differential adhesion assay to fibronectin. Clonal cell lines were expanded in growth media to high population doublings and karyotype analysis performed. We present data to show that this cell population demonstrates a restricted differential potential during chondrogenic induction in a 3D pellet culture system. Furthermore, evidence of high telomerase activity and maintenance of telomere length, characteristic of a mesenchymal stem cell population, were observed in this clonal cell population. Lastly, as proof of principle, we carried out a pilot repair study in a goat in vivo model demonstrating the ability of goat cartilage progenitors to form a cartilage-like repair tissue in a chondral defect.

Conclusions

In conclusion, we propose that we have identified and characterised a novel cartilage progenitor population resident in human articular cartilage which will greatly benefit future cell-based cartilage repair therapies due to its ability to maintain chondrogenicity upon extensive expansion unlike full-depth chondrocytes that lose this ability at only seven population doublings.     

Implantation of Ferumoxides Labeled Human Mesenchymal Stem Cells in Cartilage Defects

The field of tissue engineering integrates the principles of engineering, cell biology and medicine towards the regeneration of specific cells and functional tissue. Matrix associated stem cell implants (MASI) aim to regenerate cartilage defects due to arthritic or traumatic joint injuries. Adult mesenchymal stem cells (MSCs) have the ability to differentiate into cells of the chondrogenic lineage and have shown promising results for cell-based articular cartilage repair technologies. Autologous MSCs can be isolated from a variety of tissues, can be expanded in cell cultures without losing their differentiation potential, and have demonstrated chondrogenic differentiation in vitro and in vivo^{1, 2}.In order to provide local retention and viability of transplanted MSCs in cartilage defects, a scaffold is needed, which also supports subsequent differentiation and proliferation. The architecture of the scaffold guides tissue formation and permits the extracellular matrix, produced by the stem cells, to expand. Previous investigations have shown that a 2% agarose scaffold may support the development of stable hyaline cartilage and does not induce immune responses³.Long term retention of transplanted stem cells in MASI is critical for cartilage regeneration. Labeling of MSCs with iron oxide nanoparticles allows for long-term in vivo tracking with non-invasive MR imaging techniques⁴.This presentation will demonstrate techniques for labeling MSCs with iron oxide nanoparticles, the generation of cell-agarose constructs and implantation of these constructs into cartilage defects. The labeled constructs can be tracked non-invasively with MR-Imaging.Open in a separate windowClick here to view.^{(27M, flv)}     

The minipig model for experimental chondral and osteochondral defect repair in tissue engineering: retrospective analysis of 180 defects

Articular cartilage repair is still a challenge in orthopaedic surgery. Although many treatment options have been developed in the last decade, true regeneration of hyaline articular cartilage is yet to be accomplished. In vitro experiments are useful for evaluating cell-matrix interactions under controlled parameters. When introducing new treatment options into clinical routine, adequate animal models are capable of closing the gap between in vitro experiments and the clinical use in human beings. We developed an animal model in the G?ttingen minipig (GMP) to evaluate the healing of osteochondral or full-thickness cartilage defects. The defects were located in the middle third of the medial portion of the patellofemoral joint at both distal femurs. Chondral defects were 6.3 mm, osteochondral defects either 5.4 or 6.3 mm in diameter and 8 or 10 mm deep. In both defects the endogenous repair response showed incomplete repair tissue formation up to 12 months postoperatively. Based on its limited capability for endogenous repair of chondral and osteochondral defects, the GMP is a useful model for critical assessment of new treatment strategies in articular cartilage tissue engineering.     

Depth-dependent biomechanical and biochemical properties of fetal, newborn, and tissue-engineered articular cartilage

Adult articular cartilage has depth-dependent mechanical and biochemical properties which contribute to zone-specific functions. The compressive moduli of immature cartilage and tissue-engineered cartilage are known to be lower than those of adult cartilage. The objective of this study was to determine if such tissues exhibit depth-dependent compressive properties, and how these depth-varying properties were correlated with cell and matrix composition of the tissue. The compressive moduli of fetal and newborn bovine articular cartilage increased with depth (p<0.05) by a factor of 4-5 from the top 0.1 mm (28+/-13 kPa, 141+/-10 kPa, respectively) to 1 mm deep into the tissue. Likewise, the glycosaminoglycan and collagen content increased with depth (both p<0.001), and correlated with the modulus (both p<0.01). In contrast, tissue-engineered cartilage formed by either layering or mixing cells from the superficial and middle zone of articular cartilage exhibited similarly soft regions at both construct surfaces, as exemplified by large equilibrium strains. The properties of immature cartilage may provide a template for developing tissue-engineered cartilage which aims to repair cartilage defects by recapitulating the natural development and growth processes. These results suggest that while depth-dependent properties may be important to engineer into cartilage constructs, issues other than cell heterogeneity must be addressed to generate such tissues.     

Growth Factor Stimulation Improves the Structure and Properties of Scaffold-Free Engineered Auricular Cartilage Constructs

The reconstruction of the external ear to correct congenital deformities or repair following trauma remains a significant challenge in reconstructive surgery. Previously, we have developed a novel approach to create scaffold-free, tissue engineering elastic cartilage constructs directly from a small population of donor cells. Although the developed constructs appeared to adopt the structural appearance of native auricular cartilage, the constructs displayed limited expression and poor localization of elastin. In the present study, the effect of growth factor supplementation (insulin, IGF-1, or TGF-β1) was investigated to stimulate elastogenesis as well as to improve overall tissue formation. Using rabbit auricular chondrocytes, bioreactor-cultivated constructs supplemented with either insulin or IGF-1 displayed increased deposition of cartilaginous ECM, improved mechanical properties, and thicknesses comparable to native auricular cartilage after 4 weeks of growth. Similarly, growth factor supplementation resulted in increased expression and improved localization of elastin, primarily restricted within the cartilaginous region of the tissue construct. Additional studies were conducted to determine whether scaffold-free engineered auricular cartilage constructs could be developed in the 3D shape of the external ear. Isolated auricular chondrocytes were grown in rapid-prototyped tissue culture molds with additional insulin or IGF-1 supplementation during bioreactor cultivation. Using this approach, the developed tissue constructs were flexible and had a 3D shape in very good agreement to the culture mold (average error <400 µm). While scaffold-free, engineered auricular cartilage constructs can be created with both the appropriate tissue structure and 3D shape of the external ear, future studies will be aimed assessing potential changes in construct shape and properties after subcutaneous implantation.     

Osteochondral tissue engineering: Current strategies and challenges

Osteochondral defect management and repair remain a significant challenge in orthopedic surgery. Osteochondral defects contain damage to both the articular cartilage as well as the underlying subchondral bone. In order to repair an osteochondral defect the needs of the bone, cartilage and the bone-cartilage interface must be taken into account. Current clinical treatments for the repair of osteochondral defects have only been palliative, not curative. Tissue engineering has emerged as a potential alternative as it can be effectively used to regenerate bone, cartilage and the bone-cartilage interface. Several scaffold strategies, such as single phase, layered, and recently graded structures have been developed and evaluated for osteochondral defect repair. Also, as a potential cell source, tissue specific cells and progenitor cells are widely studied in cell culture models, as well with the osteochondral scaffolds in vitro and in vivo. Novel factor strategies being developed, including single factor, multi-factor, or controlled factor release in a graded fashion, not only assist bone and cartilage regeneration, but also establish osteochondral interface formation. The field of tissue engineering has made great strides, however further research needs to be carried out to make this strategy a clinical reality. In this review, we summarize current tissue engineering strategies, including scaffold design, bioreactor use, as well as cell and factor based approaches and recent developments for osteochondral defect repair. In addition, we discuss various challenges that need to be addressed in years to come.     

Recent progress of animal transplantation studies for treating articular cartilage damage using pluripotent stem cells

Focal articular cartilage damage can eventually lead to the onset of osteoarthritis with degradation around healthy articular cartilage. Currently, there are no drugs available that effectively repair articular cartilage damage. Several surgical techniques exist and are expected to prevent progression to osteoarthritis, but they do not offer a long‐term clinical solution. Recently, regenerative medicine approaches using human pluripotent stem cells (PSCs) have gained attention as new cell sources for therapeutic products. To translate PSCs to clinical application, appropriate cultures that produce large amounts of chondrocytes and hyaline cartilage are needed. So too are assays for the safety and efficacy of the cellular materials in preclinical studies including animal transplantation models. To confirm safety and efficacy, transplantation into the subcutaneous space and articular cartilage defects have been performed in animal models. All but one study we reviewed that transplanted PSC‐derived cellular products into articular cartilage defects found safe and effective recovery. However, for most of those studies, the quality of the PSCs was not verified, and the evaluations were done with small animals over short observation periods. Large animals and longer observation times are preferred. We will discuss the recent progress and future direction of the animal transplantation studies for the treatment of focal articular cartilage damages using PSCs.